From 0af04934be0046ec056074edfb176f42a21da6f0 Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Thu, 9 Aug 2018 15:29:44 -0400 Subject: media: dt-bindings: media: adv748x: Document re-mappable addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ADV748x supports configurable slave addresses for its I2C pages. Document the page names, and provide an example for setting each of the pages explicitly. Signed-off-by: Kieran Bingham Reviewed-by: Rob Herring Reviewed-by: Laurent Pinchart Reviewed-by: Niklas Söderlund Signed-off-by: Mauro Carvalho Chehab --- Documentation/devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/media/i2c') diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 54d1d3bc1869..5dddc95f9cc4 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -10,7 +10,11 @@ Required Properties: - "adi,adv7481" for the ADV7481 - "adi,adv7482" for the ADV7482 - - reg: I2C slave address + - reg: I2C slave addresses + The ADV748x has up to twelve 256-byte maps that can be accessed via the + main I2C ports. Each map has it own I2C address and acts as a standard + slave device on the I2C bus. The main address is mandatory, others are + optional and remain at default values if not specified. Optional Properties: @@ -18,6 +22,11 @@ Optional Properties: "intrq3". All interrupts are optional. The "intrq3" interrupt is only available on the adv7481 - interrupts: Specify the interrupt lines for the ADV748x + - reg-names : Names of maps with programmable addresses. + It shall contain all maps needing a non-default address. + Possible map names are: + "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" The device node must contain one 'port' child node per device input and output port, in accordance with the video interface bindings defined in @@ -47,7 +56,10 @@ Example: video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3