From a70eb9165e2a0f2867f0eb78f12665893d135ee1 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Thu, 10 Jun 2021 10:20:23 +0200 Subject: dt-binding: memory: pl353-smc: Rephrase the binding Reword this document before converting it to yaml. Signed-off-by: Miquel Raynal Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210610082040.2075611-2-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski --- .../devicetree/bindings/memory-controllers/pl353-smc.txt | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree/bindings/memory-controllers') diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt index d56615fd343a..f0b7fe173668 100644 --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt @@ -1,8 +1,7 @@ Device tree bindings for ARM PL353 static memory controller -PL353 static memory controller supports two kinds of memory -interfaces.i.e NAND and SRAM/NOR interfaces. -The actual devices are instantiated from the child nodes of pl353 smc node. +PL353 Static Memory Controller is a bus where you can connect two kinds +of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR). Required properties: - compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell". @@ -13,9 +12,9 @@ Required properties: - address-cells : Must be 2. - size-cells : Must be 1. -Child nodes: - For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are -supported as child nodes. +The child device node represents the controller connected to the SMC +bus. Only one between: NAND controller, NOR controller and SRAM controller +is allowed in a single system. for NAND partition information please refer the below file Documentation/devicetree/bindings/mtd/partition.txt -- cgit v1.2.3