From 907bf9d65f2da9b7ea1b5aa0c1b8d5950f29356d Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Tue, 21 May 2019 20:41:13 +0000 Subject: dt-bindings: mfd: Document short/long press duration for BD718X7 These values can be overwritten at probe time. Signed-off-by: Leonard Crestez Acked-By: Matti Vaittinen Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt index d5f68ac78d15..3649c1191432 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt @@ -38,6 +38,14 @@ target state is set to READY by default. If SNVS state is used the boot crucial regulators must have the regulator-always-on and regulator-boot-on properties set in regulator node. +- rohm,short-press-ms : Short press duration in milliseconds +- rohm,long-press-ms : Long press duration in milliseconds + +Configure the "short press" and "long press" timers for the power button. +Values are rounded to what hardware supports (500ms multiple for short and +1000ms multiple for long). If these properties are not present the existing +configuration (from bootloader or OTP) is not touched. + Example: /* external oscillator node */ -- cgit v1.2.3