From 13a22f73319c75511bd6b49cc77afb15fed0a91e Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 23 Apr 2019 11:04:41 +0200 Subject: dt-bindings: mfd: Add DT bindings for max77650 Add a DT binding document for max77650 ultra-low power PMIC. This describes the core mfd device and the GPIO module. Signed-off-by: Bartosz Golaszewski Reviewed-by: Rob Herring Acked-by: Pavel Machek Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/max77650.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/max77650.txt (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt new file mode 100644 index 000000000000..b529d8d19335 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.txt @@ -0,0 +1,46 @@ +MAX77650 ultra low-power PMIC from Maxim Integrated. + +Required properties: +------------------- +- compatible: Must be "maxim,max77650" +- reg: I2C device address. +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Must be <2>. + +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and + the second cell is used to specify the gpio active + state. + +Optional properties: +-------------------- +gpio-line-names: Single string containing the name of the GPIO line. + +The GPIO-controller module is represented as part of the top-level PMIC +node. The device exposes a single GPIO line. + +For device-tree bindings of other sub-modules (regulator, power supply, +LEDs and onkey) refer to the binding documents under the respective +sub-system directories. + +For more details on GPIO bindings, please refer to the generic GPIO DT +binding document . + +Example: +-------- + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + }; -- cgit v1.2.3 From 56076a538536ace0ac4965771acd7c62fdd4c3dd Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sun, 5 May 2019 18:43:20 +0300 Subject: dt-bindings: mfd: max77620: Add compatible for Maxim 77663 Maxim 77663 has a few minor differences in regards to hardware interface and available capabilities by comparing it with 77620 and 20024 models, hence re-use 77620 device-tree binding for the 77663. Signed-off-by: Dmitry Osipenko Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/max77620.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 9c16d51cc15b..b75283787ba1 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -4,7 +4,8 @@ Required properties: ------------------- - compatible: Must be one of "maxim,max77620" - "maxim,max20024". + "maxim,max20024" + "maxim,max77663" - reg: I2C device address. Optional properties: @@ -105,6 +106,7 @@ Optional properties: Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. -maxim,power-ok-control: configure map power ok bit 1: Enables POK(Power OK) to control nRST_IO and GPIO1 -- cgit v1.2.3 From c63217a462fe655eff329abc6a552fba5452c46f Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sun, 5 May 2019 18:43:21 +0300 Subject: dt-bindings: mfd: max77620: Add system-power-controller property Document new generic property that designates the PMIC as the system's power controller. Signed-off-by: Dmitry Osipenko Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/max77620.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index b75283787ba1..5a642a51d58e 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -18,6 +18,11 @@ Optional properties: IRQ numbers for different interrupt source of MAX77620 are defined at dt-bindings/mfd/max77620.h. +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + Optional subnodes and their properties: ======================================= -- cgit v1.2.3 From fb8c86911052ccd4011392f78a24991c55c0d172 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 9 May 2019 10:58:48 +0200 Subject: dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings This patch adds documentation of device tree bindings for the STMicroelectronics Multi-Function eXpander (STMFX) MFD core. Signed-off-by: Amelie Delaunay Reviewed-by: Linus Walleij Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/stmfx.txt | 28 +++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt new file mode 100644 index 000000000000..f0c2f7fcf5c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.txt @@ -0,0 +1,28 @@ +STMicroelectonics Multi-Function eXpander (STMFX) Core bindings + +ST Multi-Function eXpander (STMFX) is a slave controller using I2C for +communication with the main MCU. Its main features are GPIO expansion, main +MCU IDD measurement (IDD is the amount of current that flows through VDD) and +resistive touchscreen controller. + +Required properties: +- compatible: should be "st,stmfx-0300". +- reg: I2C slave address of the device. +- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. + Please refer to ../interrupt-controller/interrupt.txt + +Optional properties: +- drive-open-drain: configure MFX_IRQ_OUT as open drain. +- vdd-supply: phandle of the regulator supplying STMFX. + +Example: + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + }; + +Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. -- cgit v1.2.3 From 730080a758fdc44fbfc214dd004553ef13d5b89b Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 5 Mar 2019 10:07:47 +0000 Subject: dt-bindings: mfd: Add bindings for SAM9X60 HLCD controller Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index 3f643ef121ff..5f8880cc757e 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -7,6 +7,7 @@ Required properties: "atmel,sama5d2-hlcdc" "atmel,sama5d3-hlcdc" "atmel,sama5d4-hlcdc" + "microchip,sam9x60-hlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". -- cgit v1.2.3 From a2a0c4ef4e560061b2ec226924a3e2d8652c89b1 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Fri, 5 Apr 2019 09:19:07 -0500 Subject: dt-bindings: mfd: LMU: Fix lm3632 dt binding example Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Signed-off-by: Dan Murphy Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/ti-lmu.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 980394d701a7..86ca786d54fc 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -104,8 +104,8 @@ lm3632@11 { regulators { compatible = "ti,lm363x-regulator"; - ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */ - ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */ + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; vboost { regulator-name = "lcd_boost"; -- cgit v1.2.3 From c273e63129b1ee754ecd9f2b85cc1446a7b1816e Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 1 May 2019 11:23:50 +0100 Subject: mfd: lochnagar: Add links to binding docs for sound and hwmon Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/cirrus,lochnagar.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'Documentation/devicetree/bindings/mfd') diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt index 004b0158cf4d..3bf92ad37fa1 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt @@ -19,6 +19,8 @@ And these documents for the required sub-node binding details: [4] Clock: ../clock/cirrus,lochnagar.txt [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt [6] Regulator: ../regulator/cirrus,lochnagar.txt + [7] Sound: ../sound/cirrus,lochnagar.txt + [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt Required properties: @@ -41,6 +43,11 @@ Optional sub-nodes: - Bindings for the regulator components, see [6]. Only available on Lochnagar 2. + - lochnagar-sc : Binding for the sound card components, see [7]. + Only available on Lochnagar 2. + - lochnagar-hwmon : Binding for the hardware monitor components, see [8]. + Only available on Lochnagar 2. + Optional properties: - present-gpios : Host present line, indicating the presence of a @@ -65,4 +72,14 @@ lochnagar: lochnagar@22 { compatible = "cirrus,lochnagar-pinctrl"; ... }; + + lochnagar-sc { + compatible = "cirrus,lochnagar2-soundcard"; + ... + }; + + lochnagar-hwmon { + compatible = "cirrus,lochnagar2-hwmon"; + ... + }; }; -- cgit v1.2.3