From 794f15782d9f12aa5a43f796680a5fc4f2c424e3 Mon Sep 17 00:00:00 2001 From: Chaotian Jing Date: Tue, 27 Oct 2015 14:24:21 +0800 Subject: mmc: core: Add DT bindings for eMMC hardware reset support Sometime only need set MMC_CAP_HW_RESET for one of MMC hosts, So set it in device tree is better. Signed-off-by: Chaotian Jing Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mmc.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/mmc') diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 0384fc3f64e8..f693baf87264 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -37,6 +37,7 @@ Optional properties: - sd-uhs-sdr104: SD UHS SDR104 speed is supported - sd-uhs-ddr50: SD UHS DDR50 speed is supported - cap-power-off-card: powering off the card is safe +- cap-mmc-hw-reset: eMMC hardware reset is supported - cap-sdio-irq: enable SDIO IRQ signalling on this interface - full-pwr-cycle: full power cycle of the card is supported - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported -- cgit v1.2.3