From 9c2407afbcd0edd37065ac3796bada8fc525c923 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 30 Nov 2021 09:27:56 +0100 Subject: dt-bindings: net: Reintroduce PHY no lane swap binding commit 96db48c9d777a73a33b1d516c5cfed7a417a5f40 upstream. This binding was already documented in phy.txt, commit 252ae5330daa ("Documentation: devicetree: Add PHY no lane swap binding"), but got accidently removed during YAML conversion in commit d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options"). Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are not identical, as the former one disable this feature, while the latter one doesn't change anything. Fixes: d8704342c109 ("dt-bindings: net: Add a YAML schemas for the generic PHY options") Signed-off-by: Alexander Stein Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/net/ethernet-phy.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree/bindings/net') diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 2766fe45bb98..ee42328a109d 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -91,6 +91,14 @@ properties: compensate for the board being designed with the lanes swapped. + enet-phy-lane-no-swap: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates that PHY will disable swap of the + TX/RX lanes. This property allows the PHY to work correcly after + e.g. wrong bootstrap configuration caused by issues in PCB + layout design. + eee-broken-100tx: $ref: /schemas/types.yaml#/definitions/flag description: -- cgit v1.2.3 From cba7bdc0472040550e2e573dac0f0f02b9aac7b3 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 14 Jan 2022 18:47:41 +0100 Subject: dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config commit 17a30422621c0e04cb6060d20d7edcefd7463347 upstream. This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32 doesn't fit into the MRAM. Use a depth of 16 instead. Fixes: 4edd396a1911 ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver") Link: https://lore.kernel.org/all/20220119062951.2939851-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/net') diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 0968b40aef1e..e3501bfa22e9 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3