From 751ca492f131290155fd48e16601629ecf5ee058 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 27 Aug 2021 14:42:58 +0800 Subject: dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema Convert the fsl,imx6q-pcie.txt into a schema. - ranges property should be grouped by region, with no functional changes. - only one propert is allowed in the compatible string, remove "snps,dw-pcie". Signed-off-by: Richard Zhu Link: https://lore.kernel.org/r/1630046580-19282-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Rob Herring --- .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 100 ---------- .../devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 202 +++++++++++++++++++++ 2 files changed, 202 insertions(+), 100 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml (limited to 'Documentation/devicetree/bindings/pci') diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt deleted file mode 100644 index 5e6eb44c81b5..000000000000 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ /dev/null @@ -1,100 +0,0 @@ -* Freescale i.MX6 PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -Required properties: -- compatible: - - "fsl,imx6q-pcie" - - "fsl,imx6sx-pcie", - - "fsl,imx6qp-pcie" - - "fsl,imx7d-pcie" - - "fsl,imx8mq-pcie" -- reg: base address and length of the PCIe controller -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - - "msi": The interrupt that is asserted when an MSI is received -- clock-names: Must include the following additional entries: - - "pcie_phy" - -Optional properties: -- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 -- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0 -- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 -- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 -- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 -- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for - gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs - do not meet gen2 jitter requirements and thus for gen2 capability a gen2 - compliant clock generator should be used and configured. -- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset - signal. It's not polarity aware and defaults to active-low reset sequence - (L=reset state, H=operation state). -- reset-gpio-active-high: If present then the reset sequence using the GPIO - specified in the "reset-gpio" property is reversed (H=reset state, - L=operation state). -- vpcie-supply: Should specify the regulator in charge of PCIe port power. - The regulator will be enabled when initializing the PCIe host and - disabled either as part of the init process or when shutting down the - host. -- vph-supply: Should specify the regulator in charge of VPH one of the three - PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage - supplies. - -Additional required properties for imx6sx-pcie: -- clock names: Must include the following additional entries: - - "pcie_inbound_axi" -- power-domains: Must be set to phandles pointing to the DISPLAY and - PCIE_PHY power domains -- power-domain-names: Must be "pcie", "pcie_phy" - -Additional required properties for imx7d-pcie and imx8mq-pcie: -- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain -- resets: Must contain phandles to PCIe-related reset lines exposed by SRC - IP block -- reset-names: Must contain the following entries: - - "pciephy" - - "apps" - - "turnoff" -- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node. - -Additional required properties for imx8mq-pcie: -- clock-names: Must include the following additional entries: - - "pcie_aux" - -Example: - - pcie@01000000 { - compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x04000>, - <0x01f00000 0x80000>; - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 - 0x81000000 0 0 0x01f80000 0 0x00010000 - 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; - num-lanes = <1>; - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 144>, <&clks 206>, <&clks 189>; - clock-names = "pcie", "pcie_bus", "pcie_phy"; - }; - -* Freescale i.MX7d PCIe PHY - -This is the PHY associated with the IMX7d PCIe controller. It's used by the -PCI-e controller via the fsl,imx7d-pcie-phy phandle. - -Required properties: -- compatible: - - "fsl,imx7d-pcie-phy" -- reg: base address and length of the PCIe PHY controller diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml new file mode 100644 index 000000000000..2911e565b260 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 PCIe host controller + +maintainers: + - Lucas Stach + - Richard Zhu + +description: |+ + This PCIe host controller is based on the Synopsys DesignWare PCIe IP + and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - fsl,imx6q-pcie + - fsl,imx6sx-pcie + - fsl,imx6qp-pcie + - fsl,imx7d-pcie + - fsl,imx8mq-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers. + - description: PCIe configuration space region. + + reg-names: + items: + - const: dbi + - const: config + + interrupts: + items: + - description: builtin MSI controller. + + interrupt-names: + minItems: 1 + items: + - const: msi + + clocks: + minItems: 3 + items: + - description: PCIe bridge clock. + - description: PCIe bus clock. + - description: PCIe PHY clock. + - description: Additional required clock entry for imx6sx-pcie, + imx8mq-pcie. + + clock-names: + minItems: 3 + items: + - const: pcie + - const: pcie_bus + - const: pcie_phy + - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie + + num-lanes: + const: 1 + + fsl,imx7d-pcie-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to an fsl,imx7d-pcie-phy node. Additional + required properties for imx7d-pcie and imx8mq-pcie. + + power-domains: + items: + - description: The phandle pointing to the DISPLAY domain for + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and + imx8mq-pcie. + - description: The phandle pointing to the PCIE_PHY power domains + for imx6sx-pcie. + + power-domain-names: + items: + - const: pcie + - const: pcie_phy + + resets: + maxItems: 3 + description: Phandles to PCIe-related reset lines exposed by SRC + IP block. Additional required by imx7d-pcie and imx8mq-pcie. + + reset-names: + items: + - const: pciephy + - const: apps + - const: turnoff + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-3p5db: + description: Gen2 (3.5db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2-6db: + description: Gen2 (6db) De-emphasis value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 20 + + fsl,tx-swing-full: + description: Gen2 TX SWING FULL value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,tx-swing-low: + description: TX launch amplitude swing_low value (optional required). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 127 + + fsl,max-link-speed: + description: Specify PCI Gen for link capability (optional required). + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter + requirements and thus for gen2 capability a gen2 compliant clock + generator should be used and configured. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 + + reset-gpio: + description: Should specify the GPIO for controlling the PCI bus device + reset signal. It's not polarity aware and defaults to active-low reset + sequence (L=reset state, H=operation state) (optional required). + + reset-gpio-active-high: + description: If present then the reset sequence using the GPIO + specified in the "reset-gpio" property is reversed (H=reset state, + L=operation state) (optional required). + + vpcie-supply: + description: Should specify the regulator in charge of PCIe port power. + The regulator will be enabled when initializing the PCIe host and + disabled either as part of the init process or when shutting down + the host (optional required). + + vph-supply: + description: Should specify the regulator in charge of VPH one of + the three PCIe PHY powers. This regulator can be supplied by both + 1.8v and 3.3v voltage supplies (optional required). + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - device_type + - bus-range + - ranges + - num-lanes + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + pcie: pcie@1ffc000 { + compatible = "fsl,imx6q-pcie"; + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, + <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, + <&clks IMX6QDL_CLK_LVDS1_GATE>, + <&clks IMX6QDL_CLK_PCIE_REF_125M>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + }; +... -- cgit v1.2.3