From 845d5ca26647258fea84353152c2bde759dfab5d Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Fri, 18 Dec 2015 14:38:56 +0200 Subject: PCI: qcom: Document PCIe devicetree bindings Document Qualcomm PCIe driver devicetree bindings. Signed-off-by: Stanimir Varbanov Signed-off-by: Stanimir Varbanov Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- .../devicetree/bindings/pci/qcom,pcie.txt | 233 +++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt (limited to 'Documentation/devicetree/bindings/pci') diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt new file mode 100644 index 000000000000..4059a6f89bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -0,0 +1,233 @@ +* Qualcomm PCI express root complex + +- compatible: + Usage: required + Value type: + Definition: Value should contain + - "qcom,pcie-ipq8064" for ipq8064 + - "qcom,pcie-apq8064" for apq8064 + - "qcom,pcie-apq8084" for apq8084 + +- reg: + Usage: required + Value type: + Definition: Register ranges as listed in the reg-names property + +- reg-names: + Usage: required + Value type: + Definition: Must include the following entries + - "parf" Qualcomm specific registers + - "dbi" Designware PCIe registers + - "elbi" External local bus interface registers + - "config" PCIe configuration space + +- device_type: + Usage: required + Value type: + Definition: Should be "pci". As specified in designware-pcie.txt + +- #address-cells: + Usage: required + Value type: + Definition: Should be 3. As specified in designware-pcie.txt + +- #size-cells: + Usage: required + Value type: + Definition: Should be 2. As specified in designware-pcie.txt + +- ranges: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- interrupts: + Usage: required + Value type: + Definition: MSI interrupt + +- interrupt-names: + Usage: required + Value type: + Definition: Should contain "msi" + +- #interrupt-cells: + Usage: required + Value type: + Definition: Should be 1. As specified in designware-pcie.txt + +- interrupt-map-mask: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- interrupt-map: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- clocks: + Usage: required + Value type: + Definition: List of phandle and clock specifier pairs as listed + in clock-names property + +- clock-names: + Usage: required + Value type: + Definition: Should contain the following entries + - "iface" Configuration AHB clock + +- clock-names: + Usage: required for ipq/apq8064 + Value type: + Definition: Should contain the following entries + - "core" Clocks the pcie hw block + - "phy" Clocks the pcie PHY block +- clock-names: + Usage: required for apq8084 + Value type: + Definition: Should contain the following entries + - "aux" Auxiliary (AUX) clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock +- resets: + Usage: required + Value type: + Definition: List of phandle and reset specifier pairs as listed + in reset-names property + +- reset-names: + Usage: required for ipq/apq8064 + Value type: + Definition: Should contain the following entries + - "axi" AXI reset + - "ahb" AHB reset + - "por" POR reset + - "pci" PCI reset + - "phy" PHY reset + +- reset-names: + Usage: required for apq8084 + Value type: + Definition: Should contain the following entries + - "core" Core reset + +- power-domains: + Usage: required for apq8084 + Value type: + Definition: A phandle and power domain specifier pair to the + power domain which is responsible for collapsing + and restoring power to the peripheral + +- vdda-supply: + Usage: required + Value type: + Definition: A phandle to the core analog power supply + +- vdda_phy-supply: + Usage: required for ipq/apq8064 + Value type: + Definition: A phandle to the analog power supply for PHY + +- vdda_refclk-supply: + Usage: required for ipq/apq8064 + Value type: + Definition: A phandle to the analog power supply for IC which generates + reference clock + +- phys: + Usage: required for apq8084 + Value type: + Definition: List of phandle(s) as listed in phy-names property + +- phy-names: + Usage: required for apq8084 + Value type: + Definition: Should contain "pciephy" + +- -gpios: + Usage: optional + Value type: + Definition: List of phandle and gpio specifier pairs. Should contain + - "perst-gpios" PCIe endpoint reset signal line + - "wake-gpios" PCIe endpoint wake signal line + +* Example for ipq/apq8064 + pcie@1b500000 { + compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>; + clock-names = "core", "iface", "phy"; + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + }; + +* Example for apq8084 + pcie0@fc520000 { + compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ + 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE0_GDSC>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; -- cgit v1.2.3 From 5930fe4edee072d403cfbafa0aacca78587edd73 Mon Sep 17 00:00:00 2001 From: Gabriele Paoloni Date: Fri, 27 Nov 2015 01:17:05 +0800 Subject: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers Add support for the HiSilicon Hip06 SoC. Documentation has been updated to include Hip06. Add Gabriele Paoloni as maintainer of the driver. Signed-off-by: Gabriele Paoloni Signed-off-by: Bjorn Helgaas Reviewed-by: Zhou Wang --- Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/pci') diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 17c6ed9c6059..b721beacfe4d 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -1,4 +1,4 @@ -HiSilicon PCIe host bridge DT description +HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on Designware PCI core. It shares common functions with PCIe Designware core driver and inherits @@ -7,8 +7,8 @@ Documentation/devicetree/bindings/pci/designware-pci.txt. Additional properties are described here: -Required properties: -- compatible: Should contain "hisilicon,hip05-pcie". +Required properties +- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". - reg: Should contain rc_dbi, config registers location and length. - reg-names: Must include the following entries: "rc_dbi": controller configuration registers; @@ -20,7 +20,7 @@ Optional properties: - status: Either "ok" or "disabled". - dma-coherent: Present if DMA operations are coherent. -Example: +Hip05 Example (note that Hip06 is the same except compatible): pcie@0xb0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; -- cgit v1.2.3