From cfcf126fc6795e843d090d98754391ece55e8b0c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 4 Aug 2021 09:18:56 +0200 Subject: dt-bindings: PCI: kirin: Add support for Kirin970 Add a new compatible, plus the new bindings needed by HiKey970 board. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/875a4571e253040d3885ee1f37467b0bade7361b.1628061310.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring --- .../bindings/pci/hisilicon,kirin-pcie.yaml | 83 +++++++++++++++++++++- 1 file changed, 82 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/pci') diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml index 54fd9a01a3e7..cbee87802559 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -24,11 +24,12 @@ properties: contains: enum: - hisilicon,kirin960-pcie + - hisilicon,kirin970-pcie reg: description: | Should contain dbi, apb, config registers location and length. - For HiKey960, it should also contain phy. + For hisilicon,kirin960-pcie, it should also contain phy. minItems: 3 maxItems: 4 @@ -36,6 +37,11 @@ properties: minItems: 3 maxItems: 4 + hisilicon,clken-gpios: + description: | + Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and + mini-PCIe slots. + required: - compatible - reg @@ -47,6 +53,7 @@ examples: - | #include #include + #include soc { #address-cells = <2>; @@ -83,4 +90,78 @@ examples: clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; }; + + pcie@f5000000 { + compatible = "hisilicon,kirin970-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000000>, + <0x0 0xfc180000 0x0 0x1000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy>; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = ; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio7 0 0>; + hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>; + pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0 + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@0,0 { // Lane 0: upstream + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@1,0 { // Lane 4: M.2 + reg = <0x0800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio3 1 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@5,0 { // Lane 5: Mini PCIe + reg = <0x2800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio27 4 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@7,0 { // Lane 6: Ethernet + reg = <0x03800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio25 2 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + }; }; -- cgit v1.2.3