From 290fa8d708e08f419b37c7f18445dcf6de5b7e5c Mon Sep 17 00:00:00 2001 From: Mahesh Sivasubramanian Date: Tue, 10 Apr 2018 11:57:24 -0600 Subject: dt-bindings: introduce Command DB for QCOM SoCs Command DB provides information on shared resources like clocks, regulators etc., probed at boot by the remote subsytem and made available in shared memory. Cc: devicetree@vger.kernel.org Signed-off-by: Mahesh Sivasubramanian Signed-off-by: Lina Iyer Reviewed-by: Bjorn Andersson Reviewed-by: Rob Herring Reviewed-by: Stephen Boyd Reviewed-by: Evan Green Signed-off-by: Andy Gross --- .../bindings/reserved-memory/qcom,cmd-db.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt (limited to 'Documentation/devicetree/bindings/reserved-memory') diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt new file mode 100644 index 000000000000..68395530c0a5 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt @@ -0,0 +1,37 @@ +Command DB +--------- + +Command DB is a database that provides a mapping between resource key and the +resource address for a system resource managed by a remote processor. The data +is stored in a shared memory region and is loaded by the remote processor. + +Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for +controlling shared resources. Depending on the board configuration the shared +resource properties may change. These properties are dynamically probed by the +remote processor and made available in the shared memory. + +The bindings for Command DB is specified in the reserved-memory section in +devicetree. The devicetree representation of the command DB driver should be: + +Properties: +- compatible: + Usage: required + Value type: + Definition: Should be "qcom,cmd-db" + +- reg: + Usage: required + Value type: + Definition: The register address that points to the actual location of + the Command DB in memory. + +Example: + + reserved-memory { + [...] + reserved-memory@85fe0000 { + reg = <0x0 0x85fe0000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + }; -- cgit v1.2.3