From 376349232a93645624426db782cafe688054e6d6 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Thu, 14 Sep 2017 17:28:42 +0300 Subject: ARC: reset: introduce AXS10x reset driver ARC AXS10x boards support custom IP-block which allows to control reset signals of selected peripherals. For example DW GMAC, etc... This block is controlled via memory-mapped register (AKA CREG) which represents up-to 32 reset lines. This regiter is self-clearing so we don't need to deassert line after reset. As of today only the following lines are used: - DW GMAC - line 5 Signed-off-by: Eugeniy Paltsev Signed-off-by: Philipp Zabel --- .../bindings/reset/snps,axs10x-reset.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt (limited to 'Documentation/devicetree/bindings/reset') diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 000000000000..32d8435a41df --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; -- cgit v1.2.3