From b3e913bed6ac8ea0cd01233252699fb43de754a5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 17 Apr 2015 10:48:46 -0700 Subject: Documentation: DT: Add Broadcom BCM63138 PMB binding Add a Device Tree binding for the Broadcom BCM63138 Processor Monitor Bus, which is an internal bus used to access different power and reset signals within a BCM63138 System-on-a-Chip. Signed-off-by: Florian Fainelli --- .../devicetree/bindings/reset/brcm,bcm63138-pmb.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt (limited to 'Documentation/devicetree/bindings/reset') diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt new file mode 100644 index 000000000000..a98872d27872 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt @@ -0,0 +1,19 @@ +Broadcom BCM63138 Processor Monitor Bus binding +=============================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Require properties: + +- compatible: must be "brcm,bcm63138-pmb" +- reg: base register address and size for this bus controller +- #reset-cells: must be 2 first cell is the address within the bus instance designated + by the phandle, and the second is the number of zones for this peripheral + +Example: + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; -- cgit v1.2.3