From 5cb69745da35c372b3db001efbd3967b633ba0d1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Apr 2015 15:47:32 +0100 Subject: rtc: bindings: Provide ST bindings for ST's LPC RTC device On current ST platforms the LPC controls a number of functions including Watchdog and Real Time Clock. This patch provides the bindings used to configure LPC in RTC mode. Cc: Alessandro Zummo Signed-off-by: Lee Jones --- .../devicetree/bindings/rtc/rtc-st-lpc.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt (limited to 'Documentation/devicetree/bindings/rtc') diff --git a/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt new file mode 100644 index 000000000000..73407f502e4e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt @@ -0,0 +1,25 @@ +STMicroelectronics Low Power Controller (LPC) - RTC +=================================================== + +LPC currently supports Watchdog OR Real Time Clock functionality. + +[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] + +Required properties + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or + ST_LPC_MODE_WDT [1]. One (and only one) mode must be + selected. + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,lpc-mode = ; + }; -- cgit v1.2.3