From 804584a61ca0d4547965630d5a433ad1c39e0b27 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20F=C3=A4rber?= Date: Tue, 18 Dec 2018 20:32:35 +0530 Subject: dt-bindings: serial: Document RDA Micro UART MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add an initial binding for the UART in RDA Micro RDA8810PL SoC. Signed-off-by: Andreas Färber Signed-off-by: Manivannan Sadhasivam Reviewed-by: Rob Herring Acked-by: Arnd Bergmann Signed-off-by: Olof Johansson --- .../devicetree/bindings/serial/rda,8810pl-uart.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt (limited to 'Documentation/devicetree/bindings/serial') diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..a08df97a69e6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,17 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. +- clocks : Phandle to the input clock. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + }; -- cgit v1.2.3