From 2f324ac7cf8c50aa079cf30445b99a1b98ea2728 Mon Sep 17 00:00:00 2001 From: Gareth Williams Date: Tue, 19 Mar 2019 15:52:06 +0000 Subject: dt-bindings: snps,dw-apb-ssi: Add optional clock bindings documentation Add documentation to the Synopsys SPI dt-bindings to support an optional interface clock that may be used for register access. Signed-off-by: Phil Edworthy Signed-off-by: Gareth Williams Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/spi') diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index bcd8f960afb9..f54c8c36395e 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -8,9 +8,15 @@ Required properties: - interrupts : One interrupt, used by the controller. - #address-cells : <1>, as required by generic SPI binding. - #size-cells : <0>, also as required by generic SPI binding. -- clocks : phandle for the core clock used to generate the external SPI clock. +- clocks : phandles for the clocks, see the description of clock-names below. + The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock + is optional. If a single clock is specified but no clock-name, it is the + "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. Optional properties: +- clock-names : Contains the names of the clocks: + "ssi_clk", for the core clock used to generate the external SPI clock. + "pclk", the interface clock, required for register access. - cs-gpios : Specifies the gpio pins to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. - reg-io-width : The I/O register width (in bytes) implemented by this -- cgit v1.2.3