From ea2ff61ba3f8239483f5cd823ac0113d194b469f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 6 Jul 2016 16:53:13 +0200 Subject: spi: add binding for clps711x SPI This documents the binding used by Alexander Shiyan's DT support for the clps711x SPI controller. I've left the file name to match the ARM platform port name "clps711x" for consistency with the other bindings, even though the compatible string refers to the later ep7309 chip. Linux no longer supports the old clps711x and ep72xx product lines, but we still use the name. The entire family is now discontinued by the manufacturer. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-clps711x.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-clps711x.txt (limited to 'Documentation/devicetree/bindings/spi') diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt new file mode 100644 index 000000000000..4c3ec13f423f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt @@ -0,0 +1,33 @@ +Serial Peripheral Interface on Cirrus Logic CL-PS71xx, EP72xx, EP73xx + +Required properties +- #address-cells: must be <1> +- #size-cells: must be <0> +- compatible: should include "cirrus,ep7209-spi" +- reg: Address and length of one register range +- interrupts: one interrupt line +- clocks: One entry, refers to the SPI bus clock +- cs-gpios: Specifies the gpio pins to be used for chipselects. + See: Documentation/devicetree/bindings/spi/spi-bus.txt + +An additional register is present in the system controller, +which is assumed to be in the same device tree, with and marked +as compatible with "cirrus,ep7209-syscon3". + +Example: + +spi@80000500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cirrus,ep7209-spi"; + reg = <0x80000500 0x4>; + interrupts = <15>; + clocks = <&clks CLPS711X_CLK_SPI>; + status = "disabled"; +}; + +syscon3: syscon@80002200 { + compatible = "cirrus,ep7209-syscon3", "syscon"; + reg = <0x80002200 0x40>; +}; + -- cgit v1.2.3