From 4ce6dcfd0d38169d9067c768fcce8e0d49f60fac Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Wed, 18 Jul 2018 12:13:08 +0530 Subject: dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP We want to create common code for v2 of the TSENS IP block that is used in a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle most of the common functionality start with a common get_temp() function. It is also necessary to split out the memory regions for the TM and SROT register banks because their offsets are not constant across SoC families. Signed-off-by: Amit Kucheria Reviewed-by: Rob Herring Reviewed-by: Bjorn Andersson Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Eduardo Valentin --- .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree/bindings/thermal') diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 06195e8f35e2..1d9e8cf61018 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -1,18 +1,28 @@ * QCOM SoC Temperature Sensor (TSENS) Required properties: -- compatible : - - "qcom,msm8916-tsens" : For 8916 Family of SoCs - - "qcom,msm8974-tsens" : For 8974 Family of SoCs - - "qcom,msm8996-tsens" : For 8996 Family of SoCs +- compatible: + Must be one of the following: + - "qcom,msm8916-tsens" (MSM8916) + - "qcom,msm8974-tsens" (MSM8974) + - "qcom,msm8996-tsens" (MSM8996) + - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) + - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) + The generic "qcom,tsens-v2" property must be used as a fallback for any SoC + with version 2 of the TSENS IP. MSM8996 is the only exception because the + generic property did not exist when support was added. + +- reg: Address range of the thermal registers. + New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM + register spaces separately, with order being TM before SROT. + See Example 2, below. -- reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. - #qcom,sensors: Number of sensors in tsens block - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells -Example: +Example 1 (legacy support before a fallback tsens-v2 property was introduced): tsens: thermal-sensor@900000 { compatible = "qcom,msm8916-tsens"; reg = <0x4a8000 0x2000>; @@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 { nvmem-cell-names = "caldata", "calsel"; #thermal-sensor-cells = <1>; }; + +Example 2 (for any platform containing v2 of the TSENS IP): +tsens0: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; -- cgit v1.2.3