From 4d2bb3e65035954dce7c666616906004f2c049f8 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 14 May 2018 18:42:37 -0500 Subject: dt-bindings: timer: Convert ARM timer bindings to json-schema Convert ARM timers to DT schema format using json-schema. Cc: Daniel Lezcano Cc: Thomas Gleixner Cc: Mark Rutland Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring --- .../devicetree/bindings/timer/arm,arch_timer.txt | 112 ------------------- .../devicetree/bindings/timer/arm,arch_timer.yaml | 103 ++++++++++++++++++ .../bindings/timer/arm,arch_timer_mmio.yaml | 120 +++++++++++++++++++++ .../devicetree/bindings/timer/arm,global_timer.txt | 27 ----- .../bindings/timer/arm,global_timer.yaml | 46 ++++++++ 5 files changed, 269 insertions(+), 139 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer.txt create mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer.yaml create mode 100644 Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml delete mode 100644 Documentation/devicetree/bindings/timer/arm,global_timer.txt create mode 100644 Documentation/devicetree/bindings/timer/arm,global_timer.yaml (limited to 'Documentation/devicetree/bindings/timer') diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt b/Documentation/devicetree/bindings/timer/arm,arch_timer.txt deleted file mode 100644 index 68301b77e854..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.txt +++ /dev/null @@ -1,112 +0,0 @@ -* ARM architected timer - -ARM cores may have a per-core architected timer, which provides per-cpu timers, -or a memory mapped architected timer, which provides up to 8 frames with a -physical and optional virtual timer per frame. - -The per-core architected timer is attached to a GIC to deliver its -per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC -to deliver its interrupts via SPIs. - -** CP15 Timer node properties: - -- compatible : Should at least contain one of - "arm,armv7-timer" - "arm,armv8-timer" - -- interrupts : Interrupt list for secure, non-secure, virtual and - hypervisor timers, in that order. - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only where necessary to work around broken firmware which does not configure - CNTFRQ on all CPUs to a uniform correct value. Use of this property is - strongly discouraged; fix your firmware unless absolutely impossible. - -- always-on : a boolean property. If present, the timer is powered through an - always-on power domain, therefore it never loses context. - -- fsl,erratum-a008585 : A boolean property. Indicates the presence of - QorIQ erratum A-008585, which says that reading the counter is - unreliable unless the same value is returned by back-to-back reads. - This also affects writes to the tval register, due to the implicit - counter read. - -- hisilicon,erratum-161010101 : A boolean property. Indicates the - presence of Hisilicon erratum 161010101, which says that reading the - counters is unreliable in some cases, and reads may return a value 32 - beyond the correct value. This also affects writes to the tval - registers, due to the implicit counter read. - -** Optional properties: - -- arm,cpu-registers-not-fw-configured : Firmware does not initialize - any of the generic timer CPU registers, which contain their - architecturally-defined reset values. Only supported for 32-bit - systems which follow the ARMv7 architected reset values. - -- arm,no-tick-in-suspend : The main counter does not tick when the system is in - low-power system suspend on some SoCs. This behavior does not match the - Architecture Reference Manual's specification that the system counter "must - be implemented in an always-on power domain." - - -Example: - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - -** Memory mapped timer node properties: - -- compatible : Should at least contain "arm,armv7-timer-mem". - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only when firmware has not configured the MMIO CNTFRQ registers. - -- reg : The control frame base address. - -Note that #address-cells, #size-cells, and ranges shall be present to ensure -the CPU can address a frame's registers. - -A timer node has up to 8 frame sub-nodes, each with the following properties: - -- frame-number: 0 to 7. - -- interrupts : Interrupt list for physical and virtual timers in that order. - The virtual timer interrupt is optional. - -- reg : The first and second view base addresses in that order. The second view - base address is optional. - -- status : "disabled" indicates the frame is not available for use. Optional. - -Example: - - timer@f0000000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0xf0000000 0x1000>; - clock-frequency = <50000000>; - - frame@f0001000 { - frame-number = <0> - interrupts = <0 13 0x8>, - <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; - }; - - frame@f0003000 { - frame-number = <1> - interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml new file mode 100644 index 000000000000..6deead07728e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM architected timer + +maintainers: + - Marc Zyngier + - Mark Rutland +description: |+ + ARM cores may have a per-core architected timer, which provides per-cpu timers, + or a memory mapped architected timer, which provides up to 8 frames with a + physical and optional virtual timer per frame. + + The per-core architected timer is attached to a GIC to deliver its + per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC + to deliver its interrupts via SPIs. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,cortex-a15-timer + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv7-timer + - items: + - enum: + - arm,armv8-timer + + interrupts: + items: + - description: secure timer irq + - description: non-secure timer irq + - description: virtual timer irq + - description: hypervisor timer irq + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + fsl,erratum-a008585: + type: boolean + description: Indicates the presence of QorIQ erratum A-008585, which says + that reading the counter is unreliable unless the same value is returned + by back-to-back reads. This also affects writes to the tval register, due + to the implicit counter read. + + hisilicon,erratum-161010101: + type: boolean + description: Indicates the presence of Hisilicon erratum 161010101, which + says that reading the counters is unreliable in some cases, and reads may + return a value 32 beyond the correct value. This also affects writes to + the tval registers, due to the implicit counter read. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +required: + - compatible + +oneOf: + - required: + - interrupts + - required: + - interrupts-extended + +examples: + - | + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml new file mode 100644 index 000000000000..c4ab59550fc2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM memory mapped architected timer + +maintainers: + - Marc Zyngier + - Mark Rutland + +description: |+ + ARM cores may have a memory mapped architected timer, which provides up to 8 + frames with a physical and optional virtual timer per frame. + + The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs. + +properties: + compatible: + items: + - enum: + - arm,armv7-timer-mem + + reg: + maxItems: 1 + description: The control frame base address + + '#address-cells': + enum: [1, 2] + + '#size-cells': + const: 1 + + clock-frequency: + description: The frequency of the main counter, in Hz. Should be present + only where necessary to work around broken firmware which does not configure + CNTFRQ on all CPUs to a uniform correct value. Use of this property is + strongly discouraged; fix your firmware unless absolutely impossible. + + always-on: + type: boolean + description: If present, the timer is powered through an always-on power + domain, therefore it never loses context. + + arm,cpu-registers-not-fw-configured: + type: boolean + description: Firmware does not initialize any of the generic timer CPU + registers, which contain their architecturally-defined reset values. Only + supported for 32-bit systems which follow the ARMv7 architected reset + values. + + arm,no-tick-in-suspend: + type: boolean + description: The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + +patternProperties: + '^frame@[0-9a-z]*$': + description: A timer node has up to 8 frame sub-nodes, each with the following properties. + properties: + frame-number: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 7 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: physical timer irq + - description: virtual timer irq + + reg : + minItems: 1 + maxItems: 2 + items: + - description: 1st view base address + - description: 2nd optional view base address + + required: + - frame-number + - interrupts + - reg + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +examples: + - | + timer@f0000000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xf0000000 0x1000>; + clock-frequency = <50000000>; + + frame@f0001000 { + frame-number = <0>; + interrupts = <0 13 0x8>, + <0 14 0x8>; + reg = <0xf0001000 0x1000>, + <0xf0002000 0x1000>; + }; + + frame@f0003000 { + frame-number = <1>; + interrupts = <0 15 0x8>; + reg = <0xf0003000 0x1000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.txt b/Documentation/devicetree/bindings/timer/arm,global_timer.txt deleted file mode 100644 index bdae3a818793..000000000000 --- a/Documentation/devicetree/bindings/timer/arm,global_timer.txt +++ /dev/null @@ -1,27 +0,0 @@ - -* ARM Global Timer - Cortex-A9 are often associated with a per-core Global timer. - -** Timer node required properties: - -- compatible : should contain - * "arm,cortex-a5-global-timer" for Cortex-A5 global timers. - * "arm,cortex-a9-global-timer" for Cortex-A9 global - timers or any compatible implementation. Note: driver - supports versions r2p0 and above. - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the GT timer - register window. - -- clocks : Should be phandle to a clock. - -Example: - - timer@2c000600 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - clocks = <&arm_periph_clk>; - }; diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml new file mode 100644 index 000000000000..21c24a8e28fd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/arm,global_timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Global Timer + +maintainers: + - Stuart Menefy + +description: + Cortex-A9 are often associated with a per-core Global timer. + +properties: + compatible: + items: + - enum: + - arm,cortex-a5-global-timer + - arm,cortex-a9-global-timer + + description: driver supports versions r2p0 and above. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + timer@2c000600 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf01>; + clocks = <&arm_periph_clk>; + }; +... -- cgit v1.2.3