From 576d5c3cde710ac2f4d98b05f00981ea54afa8d8 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 9 Oct 2019 14:24:44 +0800 Subject: usb: cdns3: remove upstream cadence USB3 driver Upstream version is an initial version, it can't be used directly. We will use downstream version for v5.4 instead. Signed-off-by: Peter Chen --- .../devicetree/bindings/usb/cdns-usb3.txt | 45 ---------------------- 1 file changed, 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt deleted file mode 100644 index b7dc606d37b5..000000000000 --- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt +++ /dev/null @@ -1,45 +0,0 @@ -Binding for the Cadence USBSS-DRD controller - -Required properties: - - reg: Physical base address and size of the controller's register areas. - Controller has 3 different regions: - - HOST registers area - - DEVICE registers area - - OTG/DRD registers area - - reg-names - register memory area names: - "xhci" - for HOST registers space - "dev" - for DEVICE registers space - "otg" - for OTG/DRD registers space - - compatible: Should contain: "cdns,usb3" - - interrupts: Interrupts used by cdns3 controller: - "host" - interrupt used by XHCI driver. - "peripheral" - interrupt used by device driver - "otg" - interrupt used by DRD/OTG part of driver - -Optional properties: - - maximum-speed : valid arguments are "super-speed", "high-speed" and - "full-speed"; refer to usb/generic.txt - - dr_mode: Should be one of "host", "peripheral" or "otg". - - phys: reference to the USB PHY - - phy-names: from the *Generic PHY* bindings; - Supported names are: - - cdns3,usb2-phy - - cdns3,usb3-phy - - - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints - buffers expressed in KB - -Example: - usb@f3000000 { - compatible = "cdns,usb3"; - interrupts = , - , - ; - interrupt-names = "host", "peripheral", "otg"; - reg = <0xf3000000 0x10000>, /* memory area for HOST registers */ - <0xf3010000 0x10000>, /* memory area for DEVICE registers */ - <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */ - reg-names = "xhci", "dev", "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy"; - }; -- cgit v1.2.3