From 5f3d1382e3ca39a54032784414f0ad4e7078b37e Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 23 Jul 2012 16:36:35 +0200 Subject: onewire: w1-gpio: add DT bindings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch add DT bindings to the w1-gpio driver, along with some documentation on how to use them. Signed-off-by: Daniel Mack Acked-by: Evgeniy Polyakov Acked-by: Ville Syrjälä Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/w1/w1-gpio.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt (limited to 'Documentation/devicetree/bindings/w1') diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt new file mode 100644 index 000000000000..6e09c35d9f1a --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -0,0 +1,22 @@ +w1-gpio devicetree bindings + +Required properties: + + - compatible: "w1-gpio" + - gpios: one or two GPIO specs: + - the first one is used as data I/O pin + - the second one is optional. If specified, it is used as + enable pin for an external pin pullup. + +Optional properties: + + - linux,open-drain: if specified, the data pin is considered in + open-drain mode. + +Examples: + + onewire@0 { + compatible = "w1-gpio"; + gpios = <&gpio 126 0>, <&gpio 105 0>; + }; + -- cgit v1.2.3