From eb8d0ac4afd8b15ac88f8a50342b32774ff881ed Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 28 Sep 2015 15:28:03 +0200 Subject: spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver Commit fe78d0b7691c0274 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word") changed the default RX FIFO size on R-Car Gen2 SoCs in the driver code, but forgot to update the DT bindings documentation. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/sh-msiof.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 8f771441be60..705075da2f10 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car Gen2) + (default is 64) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. -- cgit v1.2.3 From f5f6afa85aa82a8ee59072f2d09f2b381f24c871 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 29 Sep 2015 18:21:19 +0900 Subject: usb: renesas_usbhs: Add support for R-Car H3 This patch adds a compatible string to support for R-Car H3. Since the HS-USB controller of R-Car H3 is almost the same specification with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2. Acked-by: Geert Uytterhoeven Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 64a4ca6cf96f..7d48f63db44e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -5,6 +5,7 @@ Required properties: - "renesas,usbhs-r8a7790" - "renesas,usbhs-r8a7791" - "renesas,usbhs-r8a7794" + - "renesas,usbhs-r8a7795" - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs -- cgit v1.2.3 From e8e1dc803f0f7b60119d7988a9032d53628deca3 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Fri, 9 Oct 2015 17:47:03 +0100 Subject: Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM's Juno R1 board used PLDA XpressRICH3-AXI IP to implement a PCIe host bridge. Introduce "plda" as vendor prefix for PLDA and document the DT bindings for PLDA XpressRICH3-AXI IP as well as ARM's Juno R1. Signed-off-by: Liviu Dudau Acked-by: Mark Rutland --- Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt | 10 ++++++++++ .../devicetree/bindings/pci/plda,xpressrich3-axi.txt | 12 ++++++++++++ Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 3 files changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt new file mode 100644 index 000000000000..f7514c170a32 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt @@ -0,0 +1,10 @@ +* ARM Juno R1 PCIe interface + +This PCIe host controller is based on PLDA XpressRICH3-AXI IP +and thus inherits all the common properties defined in plda,xpressrich3-axi.txt +as well as the base properties defined in host-generic-pci.txt. + +Required properties: + - compatible: "arm,juno-r1-pcie" + - dma-coherent: The host controller bridges the AXI transactions into PCIe bus + in a manner that makes the DMA operations to appear coherent to the CPUs. diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt new file mode 100644 index 000000000000..f3f75bfb42bc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt @@ -0,0 +1,12 @@ +* PLDA XpressRICH3-AXI host controller + +The PLDA XpressRICH3-AXI host controller can be configured in a manner that +makes it compliant with the SBSA[1] standard published by ARM Ltd. For those +scenarios, the host-generic-pci.txt bindings apply with the following additions +to the compatible property: + +Required properties: + - compatible: should contain "plda,xpressrich3-axi" to identify the IP used. + + +[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 82d2ac97af74..57653eba640b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -168,6 +168,7 @@ pericom Pericom Technology Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. +plda PLDA pixcir PIXCIR MICROELECTRONICS Co., Ltd powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. -- cgit v1.2.3