From b43ab901d671e3e3cad425ea5e9a3c74e266dcdd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 27 Jun 2011 09:26:23 +0200 Subject: gpio: Add a driver for Sodaville GPIO controller Sodaville has GPIO controller behind the PCI bus. To my suprissed it is not the same as on PXA. The interrupt & gpio chip can be referenced from the device tree like from any other driver. Unfortunately the driver which uses the gpio interrupt has to use irq_of_parse_and_map() instead of platform_get_irq(). The problem is that the platform device (which is created from the device tree) is most likely created before the interrupt chip is registered and therefore irq_of_parse_and_map() fails. In theory the driver works as module. In reality most of the irq functions are not exported to modules and it is possible that _this_ module is unloaded while the provided irqs are still in use. Signed-off-by: Hans J. Koch [torbenh@linutronix.de: make it work after the irq namespace cleanup, add some device tree entries.] Signed-off-by: Torben Hohn [bigeasy@linutronix.de: convert to generic irq & gpio chip] Signed-off-by: Sebastian Andrzej Siewior [grant.likely@secretlab.ca: depend on x86 to avoid irq_domain breakage] Signed-off-by: Grant Likely --- .../devicetree/bindings/gpio/sodaville.txt | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/sodaville.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/sodaville.txt b/Documentation/devicetree/bindings/gpio/sodaville.txt new file mode 100644 index 000000000000..563eff22b975 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/sodaville.txt @@ -0,0 +1,48 @@ +GPIO controller on CE4100 / Sodaville SoCs +========================================== + +The bindings for CE4100's GPIO controller match the generic description +which is covered by the gpio.txt file in this folder. + +The only additional property is the intel,muxctl property which holds the +value which is written into the MUXCNTL register. + +There is no compatible property for now because the driver is probed via +PCI id (vendor 0x8086 device 0x2e67). + +The interrupt specifier consists of two cells encoded as follows: + - <1st cell>: The interrupt-number that identifies the interrupt source. + - <2nd cell>: The level-sense information, encoded as follows: + 4 - active high level-sensitive + 8 - active low level-sensitive + +Example of the GPIO device and one user: + + pcigpio: gpio@b,1 { + /* two cells for GPIO and interrupt */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15900 0x0 0x0 0x0 0x0>; + /* Interrupt line of the gpio device */ + interrupts = <15 1>; + /* It is an interrupt and GPIO controller itself */ + interrupt-controller; + gpio-controller; + intel,muxctl = <0>; + }; + + testuser@20 { + compatible = "example,testuser"; + /* User the 11th GPIO line as an active high triggered + * level interrupt + */ + interrupts = <11 8>; + interrupt-parent = <&pcigpio>; + /* Use this GPIO also with the gpio functions */ + gpios = <&pcigpio 11 0>; + }; -- cgit v1.2.3 From 384ebe1c2849160d040df3e68634ec506f13d9ff Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 16 Aug 2011 11:53:02 +0200 Subject: gpio/omap: Add DT support to GPIO driver Adapt the GPIO driver to retrieve information from a DT file. Allocate the irq_base dynamically and rename bank->virtual_irq_start to bank->irq_base. Change irq_base type to int instead of u16 to match irq_alloc_descs output. Add documentation for GPIO properties specific to OMAP. Signed-off-by: Benoit Cousson Cc: Tarun Kanti DebBarma Acked-by: Rob Herring --- .../devicetree/bindings/gpio/gpio-omap.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt new file mode 100644 index 000000000000..bff51a2fee1e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -0,0 +1,36 @@ +OMAP GPIO controller bindings + +Required properties: +- compatible: + - "ti,omap2-gpio" for OMAP2 controllers + - "ti,omap3-gpio" for OMAP3 controllers + - "ti,omap4-gpio" for OMAP4 controllers +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify optional parameters (unused) +- gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. +- interrupt-controller: Mark the device node as an interrupt controller + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +OMAP specific properties: +- ti,hwmods: Name of the hwmod associated to the GPIO: + "gpio", being the 1-based instance number from the HW spec + + +Example: + +gpio4: gpio4 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; +}; -- cgit v1.2.3