From 5ffe2d2f53eb5c891a74c351346ff19726a4c4f8 Mon Sep 17 00:00:00 2001 From: Sukrut Bellary Date: Fri, 16 May 2025 01:16:10 -0700 Subject: dt-bindings: clock: ti: Convert autoidle binding to yaml Autoidle clock is not an individual clock; it is always a derivate of some basic clock like a gate, divider, or fixed-factor. This binding will be referred in ti,divider-clock.yaml, and ti,fixed-factor-clock.yaml. As all clocks don't support the autoidle feature e.g., in DRA77xx/AM57xx[1], dpll_abe_x2* and dpll_per_x2 don't have autoidle, remove required properties from the binding. Add the creator of the original binding as a maintainer. [1] https://www.ti.com/lit/ug/spruhz6l/spruhz6l.pdf Signed-off-by: Sukrut Bellary Link: https://lore.kernel.org/r/20250516081612.767559-2-sbellary@baylibre.com Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/ti/autoidle.txt | 37 ---------------------- .../devicetree/bindings/clock/ti/ti,autoidle.yaml | 34 ++++++++++++++++++++ 2 files changed, 34 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt deleted file mode 100644 index 05645a10a9e3..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/autoidle.txt +++ /dev/null @@ -1,37 +0,0 @@ -Binding for Texas Instruments autoidle clock. - -This binding uses the common clock binding[1]. It assumes a register mapped -clock which can be put to idle automatically by hardware based on the usage -and a configuration bit setting. Autoidle clock is never an individual -clock, it is always a derivative of some basic clock like a gate, divider, -or fixed-factor. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- reg : offset for the register controlling the autoidle -- ti,autoidle-shift : bit shift of the autoidle enable bit -- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0 - -Examples: - dpll_core_m4_ck: dpll_core_m4_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_core_x2_ck>; - ti,max-div = <31>; - ti,autoidle-shift = <8>; - reg = <0x2d38>; - ti,index-starts-at-one; - ti,invert-autoidle-bit; - }; - - dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { - #clock-cells = <0>; - compatible = "ti,fixed-factor-clock"; - clocks = <&dpll_usb_ck>; - ti,clock-div = <1>; - ti,autoidle-shift = <8>; - reg = <0x01b4>; - ti,clock-mult = <1>; - ti,invert-autoidle-bit; - }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml new file mode 100644 index 000000000000..ed1bf182b64d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,autoidle.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,autoidle.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI autoidle clock + +maintainers: + - Tero Kristo + - Sukrut Bellary + +description: + Some clocks in TI SoC support the autoidle feature. These properties are + applicable only if the clock supports autoidle feature. It assumes a register + mapped clock which can be put to idle automatically by hardware based on + usage and configuration bit setting. Autoidle clock is never an individual + clock, it is always a derivative of some basic clock like a gate, divider, or + fixed-factor. + +properties: + ti,autoidle-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + bit shift of the autoidle enable bit for the clock + maximum: 31 + default: 0 + + ti,invert-autoidle-bit: + type: boolean + description: + autoidle is enabled by setting the bit to 0 + +additionalProperties: true -- cgit v1.2.3 From a7953b62de55db784fd570931adf65ef834e1f39 Mon Sep 17 00:00:00 2001 From: Sukrut Bellary Date: Fri, 16 May 2025 01:16:11 -0700 Subject: dt-bindings: clock: ti: Convert fixed-factor-clock to yaml This uses the ti,autoidle.yaml for clock autoidle support. Clean up the example to meet the current standards. Add the creator of the original binding as a maintainer. Signed-off-by: Sukrut Bellary Link: https://lore.kernel.org/r/20250516081612.767559-3-sbellary@baylibre.com Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd --- .../bindings/clock/ti/fixed-factor-clock.txt | 42 ------------ .../bindings/clock/ti/ti,fixed-factor-clock.yaml | 76 ++++++++++++++++++++++ 2 files changed, 76 insertions(+), 42 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt deleted file mode 100644 index dc69477b6e98..000000000000 --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt +++ /dev/null @@ -1,42 +0,0 @@ -Binding for TI fixed factor rate clock sources. - -This binding uses the common clock binding[1], and also uses the autoidle -support from TI autoidle clock [2]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt - -Required properties: -- compatible : shall be "ti,fixed-factor-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- ti,clock-div: fixed divider. -- ti,clock-mult: fixed multiplier. -- clocks: parent clock. - -Optional properties: -- clock-output-names : from common clock binding. -- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, - see [2] -- reg: offset for the autoidle register of this clock, see [2] -- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2] -- ti,set-rate-parent: clk_set_rate is propagated to parent - -Example: - clock { - compatible = "ti,fixed-factor-clock"; - clocks = <&parentclk>; - #clock-cells = <0>; - ti,clock-div = <2>; - ti,clock-mult = <1>; - }; - - dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { - #clock-cells = <0>; - compatible = "ti,fixed-factor-clock"; - clocks = <&dpll_usb_ck>; - ti,clock-div = <1>; - ti,autoidle-shift = <8>; - reg = <0x01b4>; - ti,clock-mult = <1>; - ti,invert-autoidle-bit; - }; diff --git a/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml new file mode 100644 index 000000000000..7a63b0992976 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/ti,fixed-factor-clock.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/ti/ti,fixed-factor-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI fixed factor rate clock sources + +maintainers: + - Tero Kristo + - Sukrut Bellary + +description: + This consists of a divider and a multiplier used to generate a fixed rate + clock. This also uses the autoidle support from TI autoidle clock. + +allOf: + - $ref: ti,autoidle.yaml# + +properties: + compatible: + const: ti,fixed-factor-clock + + "#clock-cells": + const: 0 + + reg: + maxItems: 1 + + ti,clock-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed divider + minimum: 1 + + ti,clock-mult: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed multiplier + minimum: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + + ti,set-rate-parent: + description: + Propagate to parent clock + type: boolean + +required: + - compatible + - clocks + - "#clock-cells" + - ti,clock-mult + - ti,clock-div + +unevaluatedProperties: false + +examples: + - | + bus{ + #address-cells = <1>; + #size-cells = <0>; + + clock@1b4 { + compatible = "ti,fixed-factor-clock"; + reg = <0x1b4>; + clocks = <&dpll_usb_ck>; + #clock-cells = <0>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + ti,invert-autoidle-bit; + }; + }; -- cgit v1.2.3 From 358df002da77a431239582fa8741f594baaa83f1 Mon Sep 17 00:00:00 2001 From: Sukrut Bellary Date: Fri, 16 May 2025 01:16:12 -0700 Subject: dt-bindings: clock: ti: add ti,autoidle.yaml reference ti,divider-clock uses properties from ti,autoidle. As we are converting autoidle binding to ti,autoidle.yaml, fix the reference here. Signed-off-by: Sukrut Bellary Link: https://lore.kernel.org/r/20250516081612.767559-4-sbellary@baylibre.com Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd --- .../bindings/clock/ti/ti,divider-clock.yaml | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml index 3fbe236eb565..6729fcb839d2 100644 --- a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml +++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml @@ -55,9 +55,10 @@ description: | is missing it is the same as supplying a zero shift. This binding can also optionally provide support to the hardware autoidle - feature, see [1]. + feature. - [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt +allOf: + - $ref: ti,autoidle.yaml# properties: compatible: @@ -97,7 +98,6 @@ properties: minimum: 1 default: 1 - ti,max-div: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -116,20 +116,6 @@ properties: valid divisor programming must be a power of two, only valid if ti,dividers is not defined. - ti,autoidle-shift: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - bit shift of the autoidle enable bit for the clock, - see [1]. - maximum: 31 - default: 0 - - ti,invert-autoidle-bit: - type: boolean - description: - autoidle is enabled by setting the bit to 0, - see [1] - ti,set-rate-parent: type: boolean description: @@ -156,7 +142,7 @@ required: - clocks - reg -additionalProperties: false +unevaluatedProperties: false examples: - | -- cgit v1.2.3 From 554ec5b1bd22058a3041b5173e3a123a0b959701 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:46:08 -0500 Subject: dt-bindings: clock: Convert brcm,bcm63xx-clocks to DT schema Convert the Broadcom BCM63xx clock bindings to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004610.1791426-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/brcm,bcm63xx-clocks.txt | 24 ------------ .../bindings/clock/brcm,bcm63xx-clocks.yaml | 44 ++++++++++++++++++++++ 2 files changed, 44 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt deleted file mode 100644 index 3e7ca5530775..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +++ /dev/null @@ -1,24 +0,0 @@ -Gated Clock Controller Bindings for MIPS based BCM63XX SoCs - -Required properties: -- compatible: must be one of: - "brcm,bcm3368-clocks" - "brcm,bcm6318-clocks" - "brcm,bcm6318-ubus-clocks" - "brcm,bcm6328-clocks" - "brcm,bcm6358-clocks" - "brcm,bcm6362-clocks" - "brcm,bcm6368-clocks" - "brcm,bcm63268-clocks" - -- reg: Address and length of the register set -- #clock-cells: must be <1> - - -Example: - -clkctl: clock-controller@10000004 { - compatible = "brcm,bcm6328-clocks"; - reg = <0x10000004 0x4>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml new file mode 100644 index 000000000000..56909ea499a2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm63xx-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS based BCM63XX SoCs Gated Clock Controller + +maintainers: + - Álvaro Fernández Rojas + - Jonas Gorski + +properties: + compatible: + enum: + - brcm,bcm3368-clocks + - brcm,bcm6318-clocks + - brcm,bcm6318-ubus-clocks + - brcm,bcm6328-clocks + - brcm,bcm6358-clocks + - brcm,bcm6362-clocks + - brcm,bcm6368-clocks + - brcm,bcm63268-clocks + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@10000004 { + compatible = "brcm,bcm6328-clocks"; + reg = <0x10000004 0x4>; + #clock-cells = <1>; + }; -- cgit v1.2.3 From 4a7d79c8b001cf802af50a261cc3ef716faa9cf2 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:46:15 -0500 Subject: dt-bindings: clock: Convert brcm,bcm53573-ilp to DT schema Convert the Broadcom BCM53573 ILP clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004618.1791669-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/brcm,bcm53573-ilp.txt | 36 ----------------- .../bindings/clock/brcm,bcm53573-ilp.yaml | 46 ++++++++++++++++++++++ 2 files changed, 46 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt deleted file mode 100644 index 2ebb107331dd..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt +++ /dev/null @@ -1,36 +0,0 @@ -Broadcom BCM53573 ILP clock -=========================== - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -This binding is used for ILP clock (sometimes referred as "slow clock") -on Broadcom BCM53573 devices using Cortex-A7 CPU. - -ILP's rate has to be calculated on runtime and it depends on ALP clock -which has to be referenced. - -This clock is part of PMU (Power Management Unit), a Broadcom's device -handing power-related aspects. Its node must be sub-node of the PMU -device. - -Required properties: -- compatible: "brcm,bcm53573-ilp" -- clocks: has to reference an ALP clock -- #clock-cells: should be <0> -- clock-output-names: from common clock bindings, should contain clock - name - -Example: - -pmu@18012000 { - compatible = "simple-mfd", "syscon"; - reg = <0x18012000 0x00001000>; - - ilp { - compatible = "brcm,bcm53573-ilp"; - clocks = <&alp>; - #clock-cells = <0>; - clock-output-names = "ilp"; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml new file mode 100644 index 000000000000..cd291f428a8d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm53573-ilp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM53573 ILP clock + +maintainers: + - Rafał Miłecki + +description: > + ILP clock (sometimes referred as "slow clock") on Broadcom BCM53573 devices + using Cortex-A7 CPU. + + ILP's rate has to be calculated on runtime and it depends on ALP clock which + has to be referenced. + + This clock is part of PMU (Power Management Unit), a Broadcom device handling + power-related aspects. Its node must be sub-node of the PMU device. + +properties: + compatible: + items: + - const: brcm,bcm53573-ilp + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + clock-output-names: + items: + - const: ilp + +additionalProperties: false + +examples: + - | + ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; -- cgit v1.2.3 From bd6ada566efcc047f3126ee6ac039225a0533964 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:46:46 -0500 Subject: dt-bindings: clock: Convert axis,artpec6-clkctrl to DT schema Convert the Axis ARTPEC-6 clock controller to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004647.1792464-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/artpec6.txt | 41 ---------------- .../bindings/clock/axis,artpec6-clkctrl.yaml | 55 ++++++++++++++++++++++ 2 files changed, 55 insertions(+), 41 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/artpec6.txt create mode 100644 Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt deleted file mode 100644 index dff9cdf0009c..000000000000 --- a/Documentation/devicetree/bindings/clock/artpec6.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Clock bindings for Axis ARTPEC-6 chip - -The bindings are based on the clock provider binding in -Documentation/devicetree/bindings/clock/clock-bindings.txt - -External clocks: ----------------- - -There are two external inputs to the main clock controller which should be -provided using the common clock bindings. -- "sys_refclk": External 50 Mhz oscillator (required) -- "i2s_refclk": Alternate audio reference clock (optional). - -Main clock controller ---------------------- - -Required properties: -- #clock-cells: Should be <1> - See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers. -- compatible: Should be "axis,artpec6-clkctrl" -- reg: Must contain the base address and length of the system controller -- clocks: Must contain a phandle entry for each clock in clock-names -- clock-names: Must include the external oscillator ("sys_refclk"). Optional - ones are the audio reference clock ("i2s_refclk") and the audio fractional - dividers ("frac_clk0" and "frac_clk1"). - -Examples: - -ext_clk: ext_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; -}; - -clkctrl: clkctrl@f8000000 { - #clock-cells = <1>; - compatible = "axis,artpec6-clkctrl"; - reg = <0xf8000000 0x48>; - clocks = <&ext_clk>; - clock-names = "sys_refclk"; -}; diff --git a/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml b/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml new file mode 100644 index 000000000000..a78269369df8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/axis,artpec6-clkctrl.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/axis,artpec6-clkctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axis ARTPEC-6 clock controller + +maintainers: + - Lars Persson + +properties: + compatible: + const: axis,artpec6-clkctrl + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + minItems: 1 + items: + - description: external 50 MHz oscillator. + - description: optional audio reference clock. + - description: fractional audio clock divider 0. + - description: fractional audio clock divider 1. + + clock-names: + minItems: 1 + items: + - const: sys_refclk + - const: i2s_refclk + - const: frac_clk0 + - const: frac_clk1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clock-controller@f8000000 { + compatible = "axis,artpec6-clkctrl"; + reg = <0xf8000000 0x48>; + #clock-cells = <1>; + clocks = <&ext_clk>; + clock-names = "sys_refclk"; + }; -- cgit v1.2.3 From 094e11183d1837734b3c76dbea5baf33269445b9 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:46:54 -0500 Subject: dt-bindings: clock: Convert APM XGene clocks to DT schema Convert the APM XGene clocks to DT schema. The device clock binding is a bit different from the others, so put it in its own schema file. Drop the examples. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004655.1792703-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/apm,xgene-device-clock.yaml | 80 +++++++++++++ .../bindings/clock/apm,xgene-socpll-clock.yaml | 50 ++++++++ Documentation/devicetree/bindings/clock/xgene.txt | 131 --------------------- 3 files changed, 130 insertions(+), 131 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml create mode 100644 Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/xgene.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml b/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml new file mode 100644 index 000000000000..b27bcb2a9ee0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/apm,xgene-device-clock.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/apm,xgene-device-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SoC device clocks + +maintainers: + - Khuong Dinh + +properties: + compatible: + const: apm,xgene-device-clock + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + items: + - enum: [ csr-reg, div-reg ] + - const: div-reg + minItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 1 + + clock-output-names: + maxItems: 1 + + clock-names: + maxItems: 1 + + csr-offset: + description: Offset to the CSR reset register + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + csr-mask: + description: CSR reset mask bit + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0xf + + enable-offset: + description: Offset to the enable register + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + + enable-mask: + description: CSR enable mask bit + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0xf + + divider-offset: + description: Offset to the divider register + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + divider-width: + description: Width of the divider register + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + divider-shift: + description: Bit shift of the divider register + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml b/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml new file mode 100644 index 000000000000..bdd4a6b92bbd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/apm,xgene-socpll-clock.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/apm,xgene-socpll-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SoC PLL, PCPPLL, and PMD clocks + +maintainers: + - Khuong Dinh + +properties: + compatible: + items: + - enum: + - apm,xgene-pcppll-clock + - apm,xgene-pcppll-v2-clock + - apm,xgene-pmd-clock + - apm,xgene-socpll-clock + - apm,xgene-socpll-v2-clock + + reg: + maxItems: 1 + + reg-names: + items: + - enum: [ csr-reg, div-reg ] + - const: div-reg + minItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: [ pcppll, socpll ] + + "#clock-cells": + const: 1 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - clock-output-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt deleted file mode 100644 index 8233e771711b..000000000000 --- a/Documentation/devicetree/bindings/clock/xgene.txt +++ /dev/null @@ -1,131 +0,0 @@ -Device Tree Clock bindings for APM X-Gene - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be one of the following: - "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock - "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock - "apm,xgene-pmd-clock" - for a X-Gene PMD clock - "apm,xgene-device-clock" - for a X-Gene device clock - "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock - "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock - -Required properties for SoC or PCP PLL clocks: -- reg : shall be the physical PLL register address for the pll clock. -- clocks : shall be the input parent clock phandle for the clock. This should - be the reference clock. -- #clock-cells : shall be set to 1. -- clock-output-names : shall be the name of the PLL referenced by derive - clock. -Optional properties for PLL clocks: -- clock-names : shall be the name of the PLL. If missing, use the device name. - -Required properties for PMD clocks: -- reg : shall be the physical register address for the pmd clock. -- clocks : shall be the input parent clock phandle for the clock. -- #clock-cells : shall be set to 1. -- clock-output-names : shall be the name of the clock referenced by derive - clock. -Optional properties for PLL clocks: -- clock-names : shall be the name of the clock. If missing, use the device name. - -Required properties for device clocks: -- reg : shall be a list of address and length pairs describing the CSR - reset and/or the divider. Either may be omitted, but at least - one must be present. - - reg-names : shall be a string list describing the reg resource. This - may include "csr-reg" and/or "div-reg". If this property - is not present, the reg property is assumed to describe - only "csr-reg". -- clocks : shall be the input parent clock phandle for the clock. -- #clock-cells : shall be set to 1. -- clock-output-names : shall be the name of the device referenced. -Optional properties for device clocks: -- clock-names : shall be the name of the device clock. If missing, use the - device name. -- csr-offset : Offset to the CSR reset register from the reset address base. - Default is 0. -- csr-mask : CSR reset mask bit. Default is 0xF. -- enable-offset : Offset to the enable register from the reset address base. - Default is 0x8. -- enable-mask : CSR enable mask bit. Default is 0xF. -- divider-offset : Offset to the divider CSR register from the divider base. - Default is 0x0. -- divider-width : Width of the divider register. Default is 0. -- divider-shift : Bit shift of the divider register. Default is 0. - -For example: - - pcppll: pcppll@17000100 { - compatible = "apm,xgene-pcppll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "pcppll"; - reg = <0x0 0x17000100 0x0 0x1000>; - clock-output-names = "pcppll"; - type = <0>; - }; - - pmd0clk: pmd0clk@7e200200 { - compatible = "apm,xgene-pmd-clock"; - #clock-cells = <1>; - clocks = <&pmdpll 0>; - reg = <0x0 0x7e200200 0x0 0x10>; - clock-output-names = "pmd0clk"; - }; - - socpll: socpll@17000120 { - compatible = "apm,xgene-socpll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "socpll"; - reg = <0x0 0x17000120 0x0 0x1000>; - clock-output-names = "socpll"; - type = <1>; - }; - - qmlclk: qmlclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "qmlclk"; - reg = <0x0 0x1703C000 0x0 0x1000>; - reg-name = "csr-reg"; - clock-output-names = "qmlclk"; - }; - - ethclk: ethclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "ethclk"; - reg = <0x0 0x17000000 0x0 0x1000>; - reg-names = "div-reg"; - divider-offset = <0x238>; - divider-width = <0x9>; - divider-shift = <0x0>; - clock-output-names = "ethclk"; - }; - - apbclk: apbclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&ahbclk 0>; - clock-names = "apbclk"; - reg = <0x0 0x1F2AC000 0x0 0x1000 - 0x0 0x1F2AC000 0x0 0x1000>; - reg-names = "csr-reg", "div-reg"; - csr-offset = <0x0>; - csr-mask = <0x200>; - enable-offset = <0x8>; - enable-mask = <0x200>; - divider-offset = <0x10>; - divider-width = <0x2>; - divider-shift = <0x0>; - flags = <0x8>; - clock-output-names = "apbclk"; - }; - -- cgit v1.2.3 From add0c5621c83b4f87f9336ebd4baecc347cc6052 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:49:22 -0500 Subject: dt-bindings: clock: Convert cirrus,ep7209-clk to DT schema Convert the Cirrus EP7xxx (aka CLPS711x) binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004923.1795927-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/cirrus,ep7209-clk.yaml | 47 ++++++++++++++++++++++ .../devicetree/bindings/clock/clps711x-clock.txt | 19 --------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml delete mode 100644 Documentation/devicetree/bindings/clock/clps711x-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml b/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml new file mode 100644 index 000000000000..fbd0d50d46a8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,ep7209-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CLPS711X Clock Controller + +maintainers: + - Alexander Shiyan + +description: + See include/dt-bindings/clock/clps711x-clock.h for the full list of CLPS711X + clock IDs. + +properties: + compatible: + items: + - const: cirrus,ep7312-clk + - const: cirrus,ep7209-clk + + reg: + maxItems: 1 + + startup-frequency: + description: Factory set CPU startup frequency in HZ. + $ref: /schemas/types.yaml#/definitions/uint32 + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - startup-frequency + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@80000000 { + compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + #clock-cells = <1>; + startup-frequency = <73728000>; + }; diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt deleted file mode 100644 index f1bd53f79d91..000000000000 --- a/Documentation/devicetree/bindings/clock/clps711x-clock.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Clock bindings for the Cirrus Logic CLPS711X CPUs - -Required properties: -- compatible : Shall contain "cirrus,ep7209-clk". -- reg : Address of the internal register set. -- startup-frequency: Factory set CPU startup frequency in HZ. -- #clock-cells : Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h -for the full list of CLPS711X clock IDs. - -Example: - clks: clks@80000000 { - #clock-cells = <1>; - compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; - reg = <0x80000000 0xc000>; - startup-frequency = <73728000>; - }; -- cgit v1.2.3 From 100026f4b50718d4a730672a5b5eba48a72d0405 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:46:24 -0500 Subject: dt-bindings: clock: Convert brcm,bcm2835-cprman to DT schema Convert the Broadcom BCM2835 CPRMAN clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004625.1791913-1-robh@kernel.org Reviewed-by: Stefan Wahren [sboyd@kernel.org: Add list to maintainers] Signed-off-by: Stephen Boyd --- .../bindings/clock/brcm,bcm2835-cprman.txt | 60 ---------------------- .../bindings/clock/brcm,bcm2835-cprman.yaml | 59 +++++++++++++++++++++ 2 files changed, 59 insertions(+), 60 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt deleted file mode 100644 index 9e0b03a6519b..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ /dev/null @@ -1,60 +0,0 @@ -Broadcom BCM2835 CPRMAN clocks - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CPRMAN clock controller generates clocks in the audio power domain -of the BCM2835. There is a level of PLLs deriving from an external -oscillator, a level of PLL dividers that produce channels off of the -few PLLs, and a level of mostly-generic clock generators sourcing from -the PLL channels. Most other hardware components source from the -clock generators, but a few (like the ARM or HDMI) will source from -the PLL dividers directly. - -Required properties: -- compatible: should be one of the following, - "brcm,bcm2711-cprman" - "brcm,bcm2835-cprman" -- #clock-cells: Should be <1>. The permitted clock-specifier values can be - found in include/dt-bindings/clock/bcm2835.h -- reg: Specifies base physical address and size of the registers -- clocks: phandles to the parent clocks used as input to the module, in - the following order: - - - External oscillator - - DSI0 byte clock - - DSI0 DDR2 clock - - DSI0 DDR clock - - DSI1 byte clock - - DSI1 DDR2 clock - - DSI1 DDR clock - - Only external oscillator is required. The DSI clocks may - not be present, in which case their children will be - unusable. - -Example: - - clk_osc: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-output-names = "osc"; - clock-frequency = <19200000>; - }; - - clocks: cprman@7e101000 { - compatible = "brcm,bcm2835-cprman"; - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - clocks = <&clk_osc>; - }; - - i2c0: i2c@7e205000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml new file mode 100644 index 000000000000..b0cf76c74bc7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm2835-cprman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 CPRMAN clocks + +maintainers: + - Stefan Wahren + - Raspberry Pi Kernel Maintenance + +description: + The CPRMAN clock controller generates clocks in the audio power domain of the + BCM2835. There is a level of PLLs deriving from an external oscillator, a + level of PLL dividers that produce channels off of the few PLLs, and a level + of mostly-generic clock generators sourcing from the PLL channels. Most other + hardware components source from the clock generators, but a few (like the ARM + or HDMI) will source from the PLL dividers directly. + +properties: + compatible: + enum: + - brcm,bcm2711-cprman + - brcm,bcm2835-cprman + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + minItems: 1 + items: + - description: External oscillator clock. + - description: DSI0 byte clock. + - description: DSI0 DDR2 clock. + - description: DSI0 DDR clock. + - description: DSI1 byte clock. + - description: DSI1 DDR2 clock. + - description: DSI1 DDR clock. + +additionalProperties: false + +required: + - compatible + - '#clock-cells' + - reg + - clocks + +examples: + - | + clock-controller@7e101000 { + compatible = "brcm,bcm2835-cprman"; + reg = <0x7e101000 0x2000>; + #clock-cells = <1>; + clocks = <&clk_osc>; + }; -- cgit v1.2.3 From 46dba2e6a3eeac025d7331f4a6f85d6a04b62185 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:07:11 -0500 Subject: dt-bindings: clock: Convert img,pistachio-clk to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210712.59742-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/img,pistachio-clk.yaml | 136 +++++++++++++++++++++ .../devicetree/bindings/clock/pistachio-clock.txt | 123 ------------------- 2 files changed, 136 insertions(+), 123 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml delete mode 100644 Documentation/devicetree/bindings/clock/pistachio-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml b/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml new file mode 100644 index 000000000000..e70feee8e894 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/img,pistachio-clk.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/img,pistachio-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies Pistachio SoC clock controllers + +maintainers: + - Andrew Bresticker + +description: | + Pistachio has four clock controllers (core clock, peripheral clock, peripheral + general control, and top general control) which are instantiated individually + from the device-tree. + + Core clock controller: + + The core clock controller generates clocks for the CPU, RPU (WiFi + BT + co-processor), audio, and several peripherals. + + Peripheral clock controller: + + The peripheral clock controller generates clocks for the DDR, ROM, and other + peripherals. The peripheral system clock ("periph_sys") generated by the core + clock controller is the input clock to the peripheral clock controller. + + Peripheral general control: + + The peripheral general control block generates system interface clocks and + resets for various peripherals. It also contains miscellaneous peripheral + control registers. + + Top-level general control: + + The top-level general control block contains miscellaneous control registers + and gates for the external clocks "audio_clk_in" and "enet_clk_in". + +properties: + compatible: + items: + - enum: + - img,pistachio-clk + - img,pistachio-clk-periph + - img,pistachio-cr-periph + - img,pistachio-cr-top + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: img,pistachio-clk + then: + properties: + clocks: + items: + - description: External 52Mhz oscillator + - description: Alternate audio reference clock + - description: Alternate ethernet PHY clock + + clock-names: + items: + - const: xtal + - const: audio_refclk_ext_gate + - const: ext_enet_in_gate + + - if: + properties: + compatible: + contains: + const: img,pistachio-clk-periph + then: + properties: + clocks: + items: + - description: Peripheral system clock + + clock-names: + items: + - const: periph_sys_core + + - if: + properties: + compatible: + contains: + const: img,pistachio-cr-periph + then: + properties: + clocks: + items: + - description: System interface clock + + clock-names: + items: + - const: sys + + - if: + properties: + compatible: + contains: + const: img,pistachio-cr-top + then: + properties: + clocks: + items: + - description: External audio reference clock + - description: External ethernet PHY clock + + clock-names: + items: + - const: audio_clk_in + - const: enet_clk_in + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt deleted file mode 100644 index 868db499eed2..000000000000 --- a/Documentation/devicetree/bindings/clock/pistachio-clock.txt +++ /dev/null @@ -1,123 +0,0 @@ -Imagination Technologies Pistachio SoC clock controllers -======================================================== - -Pistachio has four clock controllers (core clock, peripheral clock, peripheral -general control, and top general control) which are instantiated individually -from the device-tree. - -External clocks: ----------------- - -There are three external inputs to the clock controllers which should be -defined with the following clock-output-names: -- "xtal": External 52Mhz oscillator (required) -- "audio_clk_in": Alternate audio reference clock (optional) -- "enet_clk_in": Alternate ethernet PHY clock (optional) - -Core clock controller: ----------------------- - -The core clock controller generates clocks for the CPU, RPU (WiFi + BT -co-processor), audio, and several peripherals. - -Required properties: -- compatible: Must be "img,pistachio-clk". -- reg: Must contain the base address and length of the core clock controller. -- #clock-cells: Must be 1. The single cell is the clock identifier. - See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. -- clocks: Must contain an entry for each clock in clock-names. -- clock-names: Must include "xtal" (see "External clocks") and - "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the - top-level general control. - -Example: - clk_core: clock-controller@18144000 { - compatible = "img,pistachio-clk"; - reg = <0x18144000 0x800>; - clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>, - <&cr_top EXT_CLK_ENET_IN>; - clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate"; - - #clock-cells = <1>; - }; - -Peripheral clock controller: ----------------------------- - -The peripheral clock controller generates clocks for the DDR, ROM, and other -peripherals. The peripheral system clock ("periph_sys") generated by the core -clock controller is the input clock to the peripheral clock controller. - -Required properties: -- compatible: Must be "img,pistachio-periph-clk". -- reg: Must contain the base address and length of the peripheral clock - controller. -- #clock-cells: Must be 1. The single cell is the clock identifier. - See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. -- clocks: Must contain an entry for each clock in clock-names. -- clock-names: Must include "periph_sys", the peripheral system clock generated - by the core clock controller. - -Example: - clk_periph: clock-controller@18144800 { - compatible = "img,pistachio-clk-periph"; - reg = <0x18144800 0x800>; - clocks = <&clk_core CLK_PERIPH_SYS>; - clock-names = "periph_sys"; - - #clock-cells = <1>; - }; - -Peripheral general control: ---------------------------- - -The peripheral general control block generates system interface clocks and -resets for various peripherals. It also contains miscellaneous peripheral -control registers. The system clock ("sys") generated by the peripheral clock -controller is the input clock to the system clock controller. - -Required properties: -- compatible: Must include "img,pistachio-periph-cr" and "syscon". -- reg: Must contain the base address and length of the peripheral general - control registers. -- #clock-cells: Must be 1. The single cell is the clock identifier. - See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. -- clocks: Must contain an entry for each clock in clock-names. -- clock-names: Must include "sys", the system clock generated by the peripheral - clock controller. - -Example: - cr_periph: syscon@18144800 { - compatible = "img,pistachio-cr-periph", "syscon"; - reg = <0x18148000 0x1000>; - clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>; - clock-names = "sys"; - - #clock-cells = <1>; - }; - -Top-level general control: --------------------------- - -The top-level general control block contains miscellaneous control registers and -gates for the external clocks "audio_clk_in" and "enet_clk_in". - -Required properties: -- compatible: Must include "img,pistachio-cr-top" and "syscon". -- reg: Must contain the base address and length of the top-level - control registers. -- clocks: Must contain an entry for each clock in clock-names. -- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see - "External clocks"). -- #clock-cells: Must be 1. The single cell is the clock identifier. - See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. - -Example: - cr_top: syscon@18144800 { - compatible = "img,pistachio-cr-top", "syscon"; - reg = <0x18149000 0x200>; - clocks = <&audio_refclk>, <&ext_enet_in>; - clock-names = "audio_clk_in", "enet_clk_in"; - - #clock-cells = <1>; - }; -- cgit v1.2.3 From bb21488670d77ee928f3760f2ea84e3df015df33 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:07:40 -0500 Subject: dt-bindings: clock: Convert lsi,axm5516-clks to DT schema Convert the Intel/LSI AXM5516 clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210741.60467-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/lsi,axm5516-clks.txt | 29 --------------- .../bindings/clock/lsi,axm5516-clks.yaml | 43 ++++++++++++++++++++++ 2 files changed, 43 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt create mode 100644 Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt deleted file mode 100644 index 3ce97cfe999b..000000000000 --- a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt +++ /dev/null @@ -1,29 +0,0 @@ -AXM5516 clock driver bindings ------------------------------ - -Required properties : -- compatible : shall contain "lsi,axm5516-clks" -- reg : shall contain base register location and length -- #clock-cells : shall contain 1 - -The consumer specifies the desired clock by having the clock ID in its "clocks" -phandle cell. See for the list of -supported clock IDs. - -Example: - - clks: clock-controller@2010020000 { - compatible = "lsi,axm5516-clks"; - #clock-cells = <1>; - reg = <0x20 0x10020000 0 0x20000>; - }; - - serial0: uart@2010080000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x20 0x10080000 0 0x1000>; - interrupts = ; - clocks = <&clks AXXIA_CLK_PER>; - clock-names = "apb_pclk"; - }; - }; - diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml new file mode 100644 index 000000000000..7a792dbeffb3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 LSI +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/lsi,axm5516-clks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LSI AXM5516 Clock Controller + +maintainers: + - Anders Berg + +description: + See for the list of supported clock IDs. + +properties: + compatible: + const: lsi,axm5516-clks + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <1>; + clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0x20000>; + }; + }; -- cgit v1.2.3 From f139defc6b487c5d2f83d7a8938f476c762210fa Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:07:49 -0500 Subject: dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema Convert the TI-NSPIRE clock bindings to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210750.60759-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/lsi,nspire-cx-clock.yaml | 33 ++++++++++++++++++++++ .../devicetree/bindings/clock/nspire-clock.txt | 24 ---------------- 2 files changed, 33 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/nspire-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml b/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml new file mode 100644 index 000000000000..52c217d210d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lsi,nspire-cx-clock.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/lsi,nspire-cx-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE Clocks + +maintainers: + - Daniel Tang + +properties: + compatible: + enum: + - lsi,nspire-cx-ahb-divider + - lsi,nspire-classic-ahb-divider + - lsi,nspire-cx-clock + - lsi,nspire-classic-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + +additionalProperties: false + +required: + - compatible + - reg diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt deleted file mode 100644 index 7c3bc8bb5b9f..000000000000 --- a/Documentation/devicetree/bindings/clock/nspire-clock.txt +++ /dev/null @@ -1,24 +0,0 @@ -TI-NSPIRE Clocks - -Required properties: -- compatible: Valid compatible properties include: - "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model - "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model - "lsi,nspire-cx-clock" for the base clock in the CX model - "lsi,nspire-classic-clock" for the base clock in the older model - -- reg: Physical base address of the controller and length of memory mapped - region. - -Optional: -- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent - clock where it divides the rate from. - -Example: - -ahb_clk { - #clock-cells = <0>; - compatible = "lsi,nspire-cx-clock"; - reg = <0x900B0000 0x4>; - clocks = <&base_clk>; -}; -- cgit v1.2.3 From 12fa3aaf8b6ad1038a0a3c6a2e75316b531185c5 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:05 -0500 Subject: dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema Convert the Marvell Armada XP CPU clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210806.61286-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../clock/marvell,armada-xp-cpu-clock.yaml | 44 ++++++++++++++++++++++ .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 23 ----------- 2 files changed, 44 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml new file mode 100644 index 000000000000..f2ac6741da9a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-xp-cpu-clock.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +--- +$schema: http://devicetree.org/meta-schemas/core.yaml# +$id: http://devicetree.org/schemas/clock/marvell,armada-xp-cpu-clock.yaml# + +title: Marvell EBU CPU Clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +properties: + compatible: + enum: + - marvell,armada-xp-cpu-clock + - marvell,mv98dx3236-cpu-clock + + reg: + items: + - description: Clock complex registers + - description: PMU DFS registers + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + clock-controller@d0018700 { + #clock-cells = <1>; + compatible = "marvell,armada-xp-cpu-clock"; + reg = <0xd0018700 0xa0>, <0x1c054 0x10>; + clocks = <&coreclk 1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt deleted file mode 100644 index 7f28506eaee7..000000000000 --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Device Tree Clock bindings for cpu clock of Marvell EBU platforms - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP - "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC -- reg : Address and length of the clock complex register set, followed - by address and length of the PMU DFS registers -- #clock-cells : should be set to 1. -- clocks : shall be the input parent clock phandle for the clock. - -cpuclk: clock-complex@d0018700 { - #clock-cells = <1>; - compatible = "marvell,armada-xp-cpu-clock"; - reg = <0xd0018700 0xA0>, <0x1c054 0x10>; - clocks = <&coreclk 1>; -} - -cpu@0 { - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; -}; -- cgit v1.2.3 From e9a17eaaf18d9721b311675df00eaf142df3c726 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:11 -0500 Subject: dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema Convert the Marvell gating clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210813.61484-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../clock/marvell-armada-370-gating-clock.yaml | 227 +++++++++++++++++++++ .../bindings/clock/mvebu-gated-clock.txt | 205 ------------------- 2 files changed, 227 insertions(+), 205 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml b/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml new file mode 100644 index 000000000000..0475360d2b6a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell-armada-370-gating-clock.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +--- +$id: http://devicetree.org/schemas/clock/marvell-armada-370-gating-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell EBU SoC gating-clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +description: > + Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral + clocks to be gated to save some power. The clock ID is directly mapped to the + corresponding clock gating control bit in HW to ease manual clock lookup in + datasheet. + + The following is a list of provided IDs for Armada 370: + + ID Clock Peripheral + ----------------------------------- + 0 Audio AC97 Cntrl + 1 pex0_en PCIe 0 Clock out + 2 pex1_en PCIe 1 Clock out + 3 ge1 Gigabit Ethernet 1 + 4 ge0 Gigabit Ethernet 0 + 5 pex0 PCIe Cntrl 0 + 9 pex1 PCIe Cntrl 1 + 15 sata0 SATA Host 0 + 17 sdio SDHCI Host + 23 crypto CESA (crypto engine) + 25 tdm Time Division Mplx + 28 ddr DDR Cntrl + 30 sata1 SATA Host 0 + + The following is a list of provided IDs for Armada 375: + + ID Clock Peripheral + ----------------------------------- + 2 mu Management Unit + 3 pp Packet Processor + 4 ptp PTP + 5 pex0 PCIe 0 Clock out + 6 pex1 PCIe 1 Clock out + 8 audio Audio Cntrl + 11 nd_clk Nand Flash Cntrl + 14 sata0_link SATA 0 Link + 15 sata0_core SATA 0 Core + 16 usb3 USB3 Host + 17 sdio SDHCI Host + 18 usb USB Host + 19 gop Gigabit Ethernet MAC + 20 sata1_link SATA 1 Link + 21 sata1_core SATA 1 Core + 22 xor0 XOR DMA 0 + 23 xor1 XOR DMA 0 + 24 copro Coprocessor + 25 tdm Time Division Mplx + 28 crypto0_enc Cryptographic Unit Port 0 Encryption + 29 crypto0_core Cryptographic Unit Port 0 Core + 30 crypto1_enc Cryptographic Unit Port 1 Encryption + 31 crypto1_core Cryptographic Unit Port 1 Core + + The following is a list of provided IDs for Armada 380/385: + + ID Clock Peripheral + ----------------------------------- + 0 audio Audio + 2 ge2 Gigabit Ethernet 2 + 3 ge1 Gigabit Ethernet 1 + 4 ge0 Gigabit Ethernet 0 + 5 pex1 PCIe 1 + 6 pex2 PCIe 2 + 7 pex3 PCIe 3 + 8 pex0 PCIe 0 + 9 usb3h0 USB3 Host 0 + 10 usb3h1 USB3 Host 1 + 11 usb3d USB3 Device + 13 bm Buffer Management + 14 crypto0z Cryptographic 0 Z + 15 sata0 SATA 0 + 16 crypto1z Cryptographic 1 Z + 17 sdio SDIO + 18 usb2 USB 2 + 21 crypto1 Cryptographic 1 + 22 xor0 XOR 0 + 23 crypto0 Cryptographic 0 + 25 tdm Time Division Multiplexing + 28 xor1 XOR 1 + 30 sata1 SATA 1 + + The following is a list of provided IDs for Armada 39x: + + ID Clock Peripheral + ----------------------------------- + 5 pex1 PCIe 1 + 6 pex2 PCIe 2 + 7 pex3 PCIe 3 + 8 pex0 PCIe 0 + 9 usb3h0 USB3 Host 0 + 10 usb3h1 USB3 Host 1 + 15 sata0 SATA 0 + 17 sdio SDIO + 22 xor0 XOR 0 + 28 xor1 XOR 1 + + The following is a list of provided IDs for Armada XP: + + ID Clock Peripheral + ----------------------------------- + 0 audio Audio Cntrl + 1 ge3 Gigabit Ethernet 3 + 2 ge2 Gigabit Ethernet 2 + 3 ge1 Gigabit Ethernet 1 + 4 ge0 Gigabit Ethernet 0 + 5 pex0 PCIe Cntrl 0 + 6 pex1 PCIe Cntrl 1 + 7 pex2 PCIe Cntrl 2 + 8 pex3 PCIe Cntrl 3 + 13 bp + 14 sata0lnk + 15 sata0 SATA Host 0 + 16 lcd LCD Cntrl + 17 sdio SDHCI Host + 18 usb0 USB Host 0 + 19 usb1 USB Host 1 + 20 usb2 USB Host 2 + 22 xor0 XOR DMA 0 + 23 crypto CESA engine + 25 tdm Time Division Mplx + 28 xor1 XOR DMA 1 + 29 sata1lnk + 30 sata1 SATA Host 1 + + The following is a list of provided IDs for 98dx3236: + + ID Clock Peripheral + ----------------------------------- + 3 ge1 Gigabit Ethernet 1 + 4 ge0 Gigabit Ethernet 0 + 5 pex0 PCIe Cntrl 0 + 17 sdio SDHCI Host + 18 usb0 USB Host 0 + 22 xor0 XOR DMA 0 + + The following is a list of provided IDs for Dove: + + ID Clock Peripheral + ----------------------------------- + 0 usb0 USB Host 0 + 1 usb1 USB Host 1 + 2 ge Gigabit Ethernet + 3 sata SATA Host + 4 pex0 PCIe Cntrl 0 + 5 pex1 PCIe Cntrl 1 + 8 sdio0 SDHCI Host 0 + 9 sdio1 SDHCI Host 1 + 10 nand NAND Cntrl + 11 camera Camera Cntrl + 12 i2s0 I2S Cntrl 0 + 13 i2s1 I2S Cntrl 1 + 15 crypto CESA engine + 21 ac97 AC97 Cntrl + 22 pdma Peripheral DMA + 23 xor0 XOR DMA 0 + 24 xor1 XOR DMA 1 + 30 gephy Gigabit Ethernet PHY + Note: gephy(30) is implemented as a parent clock of ge(2) + + The following is a list of provided IDs for Kirkwood: + + ID Clock Peripheral + ----------------------------------- + 0 ge0 Gigabit Ethernet 0 + 2 pex0 PCIe Cntrl 0 + 3 usb0 USB Host 0 + 4 sdio SDIO Cntrl + 5 tsu Transp. Stream Unit + 6 dunit SDRAM Cntrl + 7 runit Runit + 8 xor0 XOR DMA 0 + 9 audio I2S Cntrl 0 + 14 sata0 SATA Host 0 + 15 sata1 SATA Host 1 + 16 xor1 XOR DMA 1 + 17 crypto CESA engine + 18 pex1 PCIe Cntrl 1 + 19 ge1 Gigabit Ethernet 1 + 20 tdm Time Division Mplx + +properties: + compatible: + enum: + - marvell,armada-370-gating-clock + - marvell,armada-375-gating-clock + - marvell,armada-380-gating-clock + - marvell,armada-390-gating-clock + - marvell,armada-xp-gating-clock + - marvell,mv98dx3236-gating-clock + - marvell,dove-gating-clock + - marvell,kirkwood-gating-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + /* default parent clock is tclk */ + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt deleted file mode 100644 index de562da2ae77..000000000000 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ /dev/null @@ -1,205 +0,0 @@ -* Gated Clock bindings for Marvell EBU SoCs - -Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some -peripheral clocks to be gated to save some power. The clock consumer -should specify the desired clock by having the clock ID in its -"clocks" phandle cell. The clock ID is directly mapped to the -corresponding clock gating control bit in HW to ease manual clock -lookup in datasheet. - -The following is a list of provided IDs for Armada 370: -ID Clock Peripheral ------------------------------------ -0 Audio AC97 Cntrl -1 pex0_en PCIe 0 Clock out -2 pex1_en PCIe 1 Clock out -3 ge1 Gigabit Ethernet 1 -4 ge0 Gigabit Ethernet 0 -5 pex0 PCIe Cntrl 0 -9 pex1 PCIe Cntrl 1 -15 sata0 SATA Host 0 -17 sdio SDHCI Host -23 crypto CESA (crypto engine) -25 tdm Time Division Mplx -28 ddr DDR Cntrl -30 sata1 SATA Host 0 - -The following is a list of provided IDs for Armada 375: -ID Clock Peripheral ------------------------------------ -2 mu Management Unit -3 pp Packet Processor -4 ptp PTP -5 pex0 PCIe 0 Clock out -6 pex1 PCIe 1 Clock out -8 audio Audio Cntrl -11 nd_clk Nand Flash Cntrl -14 sata0_link SATA 0 Link -15 sata0_core SATA 0 Core -16 usb3 USB3 Host -17 sdio SDHCI Host -18 usb USB Host -19 gop Gigabit Ethernet MAC -20 sata1_link SATA 1 Link -21 sata1_core SATA 1 Core -22 xor0 XOR DMA 0 -23 xor1 XOR DMA 0 -24 copro Coprocessor -25 tdm Time Division Mplx -28 crypto0_enc Cryptographic Unit Port 0 Encryption -29 crypto0_core Cryptographic Unit Port 0 Core -30 crypto1_enc Cryptographic Unit Port 1 Encryption -31 crypto1_core Cryptographic Unit Port 1 Core - -The following is a list of provided IDs for Armada 380/385: -ID Clock Peripheral ------------------------------------ -0 audio Audio -2 ge2 Gigabit Ethernet 2 -3 ge1 Gigabit Ethernet 1 -4 ge0 Gigabit Ethernet 0 -5 pex1 PCIe 1 -6 pex2 PCIe 2 -7 pex3 PCIe 3 -8 pex0 PCIe 0 -9 usb3h0 USB3 Host 0 -10 usb3h1 USB3 Host 1 -11 usb3d USB3 Device -13 bm Buffer Management -14 crypto0z Cryptographic 0 Z -15 sata0 SATA 0 -16 crypto1z Cryptographic 1 Z -17 sdio SDIO -18 usb2 USB 2 -21 crypto1 Cryptographic 1 -22 xor0 XOR 0 -23 crypto0 Cryptographic 0 -25 tdm Time Division Multiplexing -28 xor1 XOR 1 -30 sata1 SATA 1 - -The following is a list of provided IDs for Armada 39x: -ID Clock Peripheral ------------------------------------ -5 pex1 PCIe 1 -6 pex2 PCIe 2 -7 pex3 PCIe 3 -8 pex0 PCIe 0 -9 usb3h0 USB3 Host 0 -10 usb3h1 USB3 Host 1 -15 sata0 SATA 0 -17 sdio SDIO -22 xor0 XOR 0 -28 xor1 XOR 1 - -The following is a list of provided IDs for Armada XP: -ID Clock Peripheral ------------------------------------ -0 audio Audio Cntrl -1 ge3 Gigabit Ethernet 3 -2 ge2 Gigabit Ethernet 2 -3 ge1 Gigabit Ethernet 1 -4 ge0 Gigabit Ethernet 0 -5 pex0 PCIe Cntrl 0 -6 pex1 PCIe Cntrl 1 -7 pex2 PCIe Cntrl 2 -8 pex3 PCIe Cntrl 3 -13 bp -14 sata0lnk -15 sata0 SATA Host 0 -16 lcd LCD Cntrl -17 sdio SDHCI Host -18 usb0 USB Host 0 -19 usb1 USB Host 1 -20 usb2 USB Host 2 -22 xor0 XOR DMA 0 -23 crypto CESA engine -25 tdm Time Division Mplx -28 xor1 XOR DMA 1 -29 sata1lnk -30 sata1 SATA Host 1 - -The following is a list of provided IDs for 98dx3236: -ID Clock Peripheral ------------------------------------ -3 ge1 Gigabit Ethernet 1 -4 ge0 Gigabit Ethernet 0 -5 pex0 PCIe Cntrl 0 -17 sdio SDHCI Host -18 usb0 USB Host 0 -22 xor0 XOR DMA 0 - -The following is a list of provided IDs for Dove: -ID Clock Peripheral ------------------------------------ -0 usb0 USB Host 0 -1 usb1 USB Host 1 -2 ge Gigabit Ethernet -3 sata SATA Host -4 pex0 PCIe Cntrl 0 -5 pex1 PCIe Cntrl 1 -8 sdio0 SDHCI Host 0 -9 sdio1 SDHCI Host 1 -10 nand NAND Cntrl -11 camera Camera Cntrl -12 i2s0 I2S Cntrl 0 -13 i2s1 I2S Cntrl 1 -15 crypto CESA engine -21 ac97 AC97 Cntrl -22 pdma Peripheral DMA -23 xor0 XOR DMA 0 -24 xor1 XOR DMA 1 -30 gephy Gigabit Ethernel PHY -Note: gephy(30) is implemented as a parent clock of ge(2) - -The following is a list of provided IDs for Kirkwood: -ID Clock Peripheral ------------------------------------ -0 ge0 Gigabit Ethernet 0 -2 pex0 PCIe Cntrl 0 -3 usb0 USB Host 0 -4 sdio SDIO Cntrl -5 tsu Transp. Stream Unit -6 dunit SDRAM Cntrl -7 runit Runit -8 xor0 XOR DMA 0 -9 audio I2S Cntrl 0 -14 sata0 SATA Host 0 -15 sata1 SATA Host 1 -16 xor1 XOR DMA 1 -17 crypto CESA engine -18 pex1 PCIe Cntrl 1 -19 ge1 Gigabit Ethernet 1 -20 tdm Time Division Mplx - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating - "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating - "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating - "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating - "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating - "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating - "marvell,dove-gating-clock" - for Dove SoC clock gating - "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating -- reg : shall be the register address of the Clock Gating Control register -- #clock-cells : from common clock binding; shall be set to 1 - -Optional properties: -- clocks : default parent clock phandle (e.g. tclk) - -Example: - -gate_clk: clock-gating-control@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; - /* default parent clock is tclk */ - clocks = <&core_clk 0>; - #clock-cells = <1>; -}; - -sdio0: sdio@92000 { - compatible = "marvell,dove-sdhci"; - /* get clk gate bit 8 (sdio0) */ - clocks = <&gate_clk 8>; -}; -- cgit v1.2.3 From 9919d2a81ba6ed3e835bf7d2761b648e0b47707c Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:25 -0500 Subject: dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema Convert the Marvell Armada 3700 TBG clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210826.61957-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/armada3700-tbg-clock.txt | 27 ----------- .../clock/marvell,armada-3700-tbg-clock.yaml | 54 ++++++++++++++++++++++ 2 files changed, 54 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt deleted file mode 100644 index ed1df32c577a..000000000000 --- a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs - -Marvell Armada 37xx SoCs provide Time Base Generator clocks which are -used as parent clocks for the peripheral clocks. - -The TBG clock consumer should specify the desired clock by having the -clock ID in its "clocks" phandle cell. - -The following is a list of provided IDs and clock names on Armada 3700: - 0 = TBG A P - 1 = TBG B P - 2 = TBG A S - 3 = TBG B S - -Required properties: -- compatible : shall be "marvell,armada-3700-tbg-clock" -- reg : must be the register address of North Bridge PLL register -- #clock-cells : from common clock binding; shall be set to 1 - -Example: - -tbg: tbg@13200 { - compatible = "marvell,armada-3700-tbg-clock"; - reg = <0x13200 0x1000>; - clocks = <&xtalclk>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml new file mode 100644 index 000000000000..7fd1d758f794 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-tbg-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,armada-3700-tbg-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 3700 Time Base Generator Clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +description: > + Marvell Armada 37xx SoCs provide Time Base Generator clocks which are used as + parent clocks for the peripheral clocks. + + The TBG clock consumer should specify the desired clock by having the clock ID + in its "clocks" phandle cell. + + The following is a list of provided IDs and clock names on Armada 3700: + + 0 = TBG A P + 1 = TBG B P + 2 = TBG A S + 3 = TBG B S + +properties: + compatible: + const: marvell,armada-3700-tbg-clock + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@13200 { + compatible = "marvell,armada-3700-tbg-clock"; + reg = <0x13200 0x1000>; + clocks = <&xtalclk>; + #clock-cells = <1>; + }; -- cgit v1.2.3 From e3fcba910a05350fc292d1ba209cb4d5f1f0be87 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:31 -0500 Subject: dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema Convert the Marvell Dove PLL divider clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210832.62177-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/dove-divider-clock.txt | 28 ------------ .../bindings/clock/marvell,dove-divider-clock.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/dove-divider-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt deleted file mode 100644 index 217871f483c0..000000000000 --- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -PLL divider based Dove clocks - -Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide -high speed clocks for a number of peripherals. These dividers are part of -the PMU, and thus this node should be a child of the PMU node. - -The following clocks are provided: - -ID Clock -------------- -0 AXI bus clock -1 GPU clock -2 VMeta clock -3 LCD clock - -Required properties: -- compatible : shall be "marvell,dove-divider-clock" -- reg : shall be the register address of the Core PLL and Clock Divider - Control 0 register. This will cover that register, as well as the - Core PLL and Clock Divider Control 1 register. Thus, it will have - a size of 8. -- #clock-cells : from common clock binding; shall be set to 1 - -divider_clk: core-clock@64 { - compatible = "marvell,dove-divider-clock"; - reg = <0x0064 0x8>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml new file mode 100644 index 000000000000..7a8e0e281b63 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,dove-divider-clock.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/marvell,dove-divider-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Dove PLL Divider Clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +description: > + Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide + high speed clocks for a number of peripherals. These dividers are part of the + PMU, and thus this node should be a child of the PMU node. + + The following clocks are provided: + + ID Clock + ------------- + 0 AXI bus clock + 1 GPU clock + 2 VMeta clock + 3 LCD clock + +properties: + compatible: + const: marvell,dove-divider-clock + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@64 { + compatible = "marvell,dove-divider-clock"; + reg = <0x0064 0x8>; + #clock-cells = <1>; + }; -- cgit v1.2.3 From 75cc48275fbb90e9b51e8c56339f985a689b9485 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:37 -0500 Subject: dt-bindings: clock: Convert marvell,berlin2-clk to DT schema Convert the Marvell Berlin2 clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210839.62409-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/marvell,berlin.txt | 31 ------------- .../bindings/clock/marvell,berlin2-clk.yaml | 51 ++++++++++++++++++++++ 2 files changed, 51 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin.txt create mode 100644 Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt deleted file mode 100644 index c611c495f3ff..000000000000 --- a/Documentation/devicetree/bindings/clock/marvell,berlin.txt +++ /dev/null @@ -1,31 +0,0 @@ -Device Tree Clock bindings for Marvell Berlin - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Clock related registers are spread among the chip control registers. Berlin -clock node should be a sub-node of the chip controller node. Marvell Berlin2 -(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some -minor differences in features and register layout. - -Required properties: -- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk" -- #clock-cells: must be 1 -- clocks: must be the input parent clock phandle -- clock-names: name of the input parent clock - Allowed clock-names for the reference clocks are - "refclk" for the SoCs oscillator input on all SoCs, - and SoC-specific input clocks for - BG2/BG2CD: "video_ext0" for the external video clock input - - -Example: - -chip_clk: clock { - compatible = "marvell,berlin2q-clk"; - - #clock-cells = <1>; - clocks = <&refclk>; - clock-names = "refclk"; -}; diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml b/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml new file mode 100644 index 000000000000..8d48a2c7e381 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,berlin2-clk.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,berlin2-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Berlin Clock Controller + +maintainers: + - Jisheng Zhang + +description: + Clock related registers are spread among the chip control registers. Berlin + clock node should be a sub-node of the chip controller node. Marvell Berlin2 + (BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some minor + differences in features and register layout. + +properties: + compatible: + enum: + - marvell,berlin2-clk + - marvell,berlin2q-clk + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - enum: + - refclk + - video_ext0 + +required: + - compatible + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "marvell,berlin2q-clk"; + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + }; -- cgit v1.2.3 From 7cbc8535b2403ca554d1d0ee6fd2ea3aa33055c9 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:08:43 -0500 Subject: dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema Convert the Marvell SoC core clock binding to DT schema format. It's a straight forward conversion. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521210844.62613-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/marvell,mvebu-core-clock.yaml | 94 ++++++++++++++++++++++ .../devicetree/bindings/clock/mvebu-core-clock.txt | 87 -------------------- 2 files changed, 94 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml new file mode 100644 index 000000000000..215bcd9080c3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mvebu-core-clock.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mvebu-core-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MVEBU SoC core clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +description: > + Marvell MVEBU SoCs usually allow to determine core clock frequencies by + reading the Sample-At-Reset (SAR) register. The core clock consumer should + specify the desired clock by having the clock ID in its "clocks" phandle cell. + + The following is a list of provided IDs and clock names on Armada 370/XP: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (L2 Cache clock) + 3 = hclk (DRAM control clock) + 4 = dramclk (DDR clock) + + The following is a list of provided IDs and clock names on Armada 375: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = l2clk (L2 Cache clock) + 3 = ddrclk (DDR clock) + + The following is a list of provided IDs and clock names on Armada 380/385: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = l2clk (L2 Cache clock) + 3 = ddrclk (DDR clock) + + The following is a list of provided IDs and clock names on Armada 39x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (Coherent Fabric clock) + 3 = hclk (SDRAM Controller Internal Clock) + 4 = dclk (SDRAM Interface Clock) + 5 = refclk (Reference Clock) + + The following is a list of provided IDs and clock names on 98dx3236: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = ddrclk (DDR clock) + 3 = mpll (MPLL Clock) + + The following is a list of provided IDs and clock names on Kirkwood and Dove: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = l2clk (L2 Cache clock derived from CPU0 clock) + 3 = ddrclk (DDR controller clock derived from CPU0 clock) + + The following is a list of provided IDs and clock names on Orion5x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = ddrclk (DDR controller clock derived from CPU0 clock) + +properties: + compatible: + enum: + - marvell,armada-370-core-clock + - marvell,armada-375-core-clock + - marvell,armada-380-core-clock + - marvell,armada-390-core-clock + - marvell,armada-xp-core-clock + - marvell,dove-core-clock + - marvell,kirkwood-core-clock + - marvell,mv88f5181-core-clock + - marvell,mv88f5182-core-clock + - marvell,mv88f5281-core-clock + - marvell,mv88f6180-core-clock + - marvell,mv88f6183-core-clock + - marvell,mv98dx1135-core-clock + - marvell,mv98dx3236-core-clock + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-output-names: + description: Overwrite default clock output names. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt deleted file mode 100644 index d8f5c490f893..000000000000 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Core Clock bindings for Marvell MVEBU SoCs - -Marvell MVEBU SoCs usually allow to determine core clock frequencies by -reading the Sample-At-Reset (SAR) register. The core clock consumer should -specify the desired clock by having the clock ID in its "clocks" phandle cell. - -The following is a list of provided IDs and clock names on Armada 370/XP: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU clock) - 2 = nbclk (L2 Cache clock) - 3 = hclk (DRAM control clock) - 4 = dramclk (DDR clock) - -The following is a list of provided IDs and clock names on Armada 375: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU clock) - 2 = l2clk (L2 Cache clock) - 3 = ddrclk (DDR clock) - -The following is a list of provided IDs and clock names on Armada 380/385: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU clock) - 2 = l2clk (L2 Cache clock) - 3 = ddrclk (DDR clock) - -The following is a list of provided IDs and clock names on Armada 39x: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU clock) - 2 = nbclk (Coherent Fabric clock) - 3 = hclk (SDRAM Controller Internal Clock) - 4 = dclk (SDRAM Interface Clock) - 5 = refclk (Reference Clock) - -The following is a list of provided IDs and clock names on 98dx3236: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU clock) - 2 = ddrclk (DDR clock) - 3 = mpll (MPLL Clock) - -The following is a list of provided IDs and clock names on Kirkwood and Dove: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU0 clock) - 2 = l2clk (L2 Cache clock derived from CPU0 clock) - 3 = ddrclk (DDR controller clock derived from CPU0 clock) - -The following is a list of provided IDs and clock names on Orion5x: - 0 = tclk (Internal Bus clock) - 1 = cpuclk (CPU0 clock) - 2 = ddrclk (DDR controller clock derived from CPU0 clock) - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks - "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks - "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks - "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks - "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks - "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks - "marvell,dove-core-clock" - for Dove SoC core clocks - "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) - "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC - "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC - "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC - "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC - "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC - "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC -- reg : shall be the register address of the Sample-At-Reset (SAR) register -- #clock-cells : from common clock binding; shall be set to 1 - -Optional properties: -- clock-output-names : from common clock binding; allows overwrite default clock - output names ("tclk", "cpuclk", "l2clk", "ddrclk") - -Example: - -core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; -}; - -spi0: spi@10600 { - compatible = "marvell,orion-spi"; - /* ... */ - /* get tclk from core clock provider */ - clocks = <&core_clk 0>; -}; -- cgit v1.2.3 From ed4ce1d92403191dc5edf7e117ffb8b89e0ec32c Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:18:25 -0500 Subject: dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema Convert the Marvell Armada 3700 peripheral clock binding to DT schema format. The north bridge is also a "syscon", so add the compatible to it. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521211826.77098-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/armada3700-periph-clock.txt | 71 ---------------- .../clock/marvell,armada-3700-periph-clock.yaml | 96 ++++++++++++++++++++++ 2 files changed, 96 insertions(+), 71 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt deleted file mode 100644 index fbf58c443c04..000000000000 --- a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt +++ /dev/null @@ -1,71 +0,0 @@ -* Peripheral Clock bindings for Marvell Armada 37xx SoCs - -Marvell Armada 37xx SoCs provide peripheral clocks which are -used as clock source for the peripheral of the SoC. - -There are two different blocks associated to north bridge and south -bridge. - -The peripheral clock consumer should specify the desired clock by -having the clock ID in its "clocks" phandle cell. - -The following is a list of provided IDs for Armada 3700 North bridge clocks: -ID Clock name Description ------------------------------------ -0 mmc MMC controller -1 sata_host Sata Host -2 sec_at Security AT -3 sac_dap Security DAP -4 tsecm Security Engine -5 setm_tmx Serial Embedded Trace Module -6 avs Adaptive Voltage Scaling -7 sqf SPI -8 pwm PWM -9 i2c_2 I2C 2 -10 i2c_1 I2C 1 -11 ddr_phy DDR PHY -12 ddr_fclk DDR F clock -13 trace Trace -14 counter Counter -15 eip97 EIP 97 -16 cpu CPU - -The following is a list of provided IDs for Armada 3700 South bridge clocks: -ID Clock name Description ------------------------------------ -0 gbe-50 50 MHz parent clock for Gigabit Ethernet -1 gbe-core parent clock for Gigabit Ethernet core -2 gbe-125 125 MHz parent clock for Gigabit Ethernet -3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1 -4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0 -5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1 -6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0 -7 gbe1-core Gigabit Ethernet core port 1 -8 gbe0-core Gigabit Ethernet core port 0 -9 gbe-bm Gigabit Ethernet Buffer Manager -10 sdio SDIO -11 usb32-sub2-sys USB 2 clock -12 usb32-ss-sys USB 3 clock -13 pcie PCIe controller - -Required properties: - -- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the - north bridge block, or - "marvell,armada-3700-periph-clock-sb" for the south bridge block -- reg : must be the register address of North/South Bridge Clock register -- #clock-cells : from common clock binding; shall be set to 1 - -- clocks : list of the parent clock phandle in the following order: - TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock. - - -Example: - -nb_perih_clk: nb-periph-clk@13000{ - compatible = "marvell,armada-3700-periph-clock-nb"; - reg = <0x13000 0x1000>; - clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, - <&tbg 3>, <&xtalclk>; - #clock-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml new file mode 100644 index 000000000000..87e8e4ca111a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-periph-clock.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,armada-3700-periph-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 37xx SoCs Peripheral Clocks + +maintainers: + - Andrew Lunn + - Gregory Clement + +description: > + Marvell Armada 37xx SoCs provide peripheral clocks which are used as clock + source for the peripheral of the SoC. + + There are two different blocks associated to north bridge and south bridge. + + The following is a list of provided IDs for Armada 3700 North bridge clocks: + + ID Clock name Description + ----------------------------------- + 0 mmc MMC controller + 1 sata_host Sata Host + 2 sec_at Security AT + 3 sac_dap Security DAP + 4 tsecm Security Engine + 5 setm_tmx Serial Embedded Trace Module + 6 avs Adaptive Voltage Scaling + 7 sqf SPI + 8 pwm PWM + 9 i2c_2 I2C 2 + 10 i2c_1 I2C 1 + 11 ddr_phy DDR PHY + 12 ddr_fclk DDR F clock + 13 trace Trace + 14 counter Counter + 15 eip97 EIP 97 + 16 cpu CPU + + The following is a list of provided IDs for Armada 3700 South bridge clocks: + + ID Clock name Description + ----------------------------------- + 0 gbe-50 50 MHz parent clock for Gigabit Ethernet + 1 gbe-core parent clock for Gigabit Ethernet core + 2 gbe-125 125 MHz parent clock for Gigabit Ethernet + 3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1 + 4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0 + 5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1 + 6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0 + 7 gbe1-core Gigabit Ethernet core port 1 + 8 gbe0-core Gigabit Ethernet core port 0 + 9 gbe-bm Gigabit Ethernet Buffer Manager + 10 sdio SDIO + 11 usb32-sub2-sys USB 2 clock + 12 usb32-ss-sys USB 3 clock + 13 pcie PCIe controller + +properties: + compatible: + oneOf: + - const: marvell,armada-3700-periph-clock-sb + - items: + - const: marvell,armada-3700-periph-clock-nb + - const: syscon + reg: + maxItems: 1 + + clocks: + items: + - description: TBG-A P clock and specifier + - description: TBG-B P clock and specifier + - description: TBG-A S clock and specifier + - description: TBG-B S clock and specifier + - description: Xtal clock and specifier + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@13000{ + compatible = "marvell,armada-3700-periph-clock-sb"; + reg = <0x13000 0x1000>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; + }; -- cgit v1.2.3 From cc33289129d4265c894b22f2cfefe0e66d24de80 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 21 May 2025 16:18:39 -0500 Subject: dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema Convert the Marvell Armada 3xx Core Divider clock binding to DT schema format. Add the missing "marvell,armada-390-corediv-clock" compatible and "clock-output-names" property. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521211840.77487-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../clock/marvell,armada-370-corediv-clock.yaml | 52 ++++++++++++++++++++++ .../bindings/clock/mvebu-corediv-clock.txt | 23 ---------- 2 files changed, 52 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml new file mode 100644 index 000000000000..9d766558cdb9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,armada-370-corediv-clock.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/marvell,armada-370-corediv-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MVEBU Core Divider Clock + +maintainers: + - Andrew Lunn + - Gregory Clement + +properties: + compatible: + oneOf: + - enum: + - marvell,armada-370-corediv-clock + - marvell,armada-375-corediv-clock + - marvell,armada-380-corediv-clock + - marvell,mv98dx3236-corediv-clock + - items: + - const: marvell,armada-390-corediv-clock + - const: marvell,armada-380-corediv-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - reg + - "#clock-cells" + - clocks + +additionalProperties: false + +examples: + - | + clock-controller@18740 { + compatible = "marvell,armada-370-corediv-clock"; + reg = <0x18740 0xc>; + #clock-cells = <1>; + clocks = <&pll>; + }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt deleted file mode 100644 index c7b4e3a6b2c6..000000000000 --- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Core Divider Clock bindings for Marvell MVEBU SoCs - -The following is a list of provided IDs and clock names on Armada 370/XP: - 0 = nand (NAND clock) - -Required properties: -- compatible : must be "marvell,armada-370-corediv-clock", - "marvell,armada-375-corediv-clock", - "marvell,armada-380-corediv-clock", - "marvell,mv98dx3236-corediv-clock", - -- reg : must be the register address of Core Divider control register -- #clock-cells : from common clock binding; shall be set to 1 -- clocks : must be set to the parent's phandle - -Example: - -corediv_clk: corediv-clocks@18740 { - compatible = "marvell,armada-370-corediv-clock"; - reg = <0x18740 0xc>; - #clock-cells = <1>; - clocks = <&pll>; -}; -- cgit v1.2.3 From 2e090ae61fec0e7a8bfa447ee833ae4aa264ac17 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 20 May 2025 19:47:11 -0500 Subject: dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema Convert the Alphascale Clock Controller binding to DT schema format. Add the undocumented 'clocks' property which is used in DTS. Drop the clock defines and consumer examples from the old binding. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250521004712.1793193-1-robh@kernel.org Reviewed-by: Oleksij Rempel Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/alphascale,acc.txt | 114 --------------------- .../clock/alphascale,asm9260-clock-controller.yaml | 49 +++++++++ 2 files changed, 49 insertions(+), 114 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/alphascale,acc.txt create mode 100644 Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt deleted file mode 100644 index c9fb9324c634..000000000000 --- a/Documentation/devicetree/bindings/clock/alphascale,acc.txt +++ /dev/null @@ -1,114 +0,0 @@ -Alphascale Clock Controller - -The ACC (Alphascale Clock Controller) is responsible for choosing proper -clock source, setting dividers and clock gates. - -Required properties for the ACC node: - - compatible: must be "alphascale,asm9260-clock-controller" - - reg: must contain the ACC register base and size - - #clock-cells : shall be set to 1. - -Simple one-cell clock specifier format is used, where the only cell is used -as an index of the clock inside the provider. -It is encouraged to use dt-binding for clock index definitions. SoC specific -dt-binding should be included to the device tree descriptor. For example -Alphascale ASM9260: -#include - -This binding contains two types of clock providers: - _AHB_ - AHB gate; - _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider. -All clock specific details can be found in the SoC documentation. -CLKID_AHB_ROM 0 -CLKID_AHB_RAM 1 -CLKID_AHB_GPIO 2 -CLKID_AHB_MAC 3 -CLKID_AHB_EMI 4 -CLKID_AHB_USB0 5 -CLKID_AHB_USB1 6 -CLKID_AHB_DMA0 7 -CLKID_AHB_DMA1 8 -CLKID_AHB_UART0 9 -CLKID_AHB_UART1 10 -CLKID_AHB_UART2 11 -CLKID_AHB_UART3 12 -CLKID_AHB_UART4 13 -CLKID_AHB_UART5 14 -CLKID_AHB_UART6 15 -CLKID_AHB_UART7 16 -CLKID_AHB_UART8 17 -CLKID_AHB_UART9 18 -CLKID_AHB_I2S0 19 -CLKID_AHB_I2C0 20 -CLKID_AHB_I2C1 21 -CLKID_AHB_SSP0 22 -CLKID_AHB_IOCONFIG 23 -CLKID_AHB_WDT 24 -CLKID_AHB_CAN0 25 -CLKID_AHB_CAN1 26 -CLKID_AHB_MPWM 27 -CLKID_AHB_SPI0 28 -CLKID_AHB_SPI1 29 -CLKID_AHB_QEI 30 -CLKID_AHB_QUADSPI0 31 -CLKID_AHB_CAMIF 32 -CLKID_AHB_LCDIF 33 -CLKID_AHB_TIMER0 34 -CLKID_AHB_TIMER1 35 -CLKID_AHB_TIMER2 36 -CLKID_AHB_TIMER3 37 -CLKID_AHB_IRQ 38 -CLKID_AHB_RTC 39 -CLKID_AHB_NAND 40 -CLKID_AHB_ADC0 41 -CLKID_AHB_LED 42 -CLKID_AHB_DAC0 43 -CLKID_AHB_LCD 44 -CLKID_AHB_I2S1 45 -CLKID_AHB_MAC1 46 - -CLKID_SYS_CPU 47 -CLKID_SYS_AHB 48 -CLKID_SYS_I2S0M 49 -CLKID_SYS_I2S0S 50 -CLKID_SYS_I2S1M 51 -CLKID_SYS_I2S1S 52 -CLKID_SYS_UART0 53 -CLKID_SYS_UART1 54 -CLKID_SYS_UART2 55 -CLKID_SYS_UART3 56 -CLKID_SYS_UART4 56 -CLKID_SYS_UART5 57 -CLKID_SYS_UART6 58 -CLKID_SYS_UART7 59 -CLKID_SYS_UART8 60 -CLKID_SYS_UART9 61 -CLKID_SYS_SPI0 62 -CLKID_SYS_SPI1 63 -CLKID_SYS_QUADSPI 64 -CLKID_SYS_SSP0 65 -CLKID_SYS_NAND 66 -CLKID_SYS_TRACE 67 -CLKID_SYS_CAMM 68 -CLKID_SYS_WDT 69 -CLKID_SYS_CLKOUT 70 -CLKID_SYS_MAC 71 -CLKID_SYS_LCD 72 -CLKID_SYS_ADCANA 73 - -Example of clock consumer with _SYS_ and _AHB_ sinks. -uart4: serial@80010000 { - compatible = "alphascale,asm9260-uart"; - reg = <0x80010000 0x4000>; - clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>; - interrupts = <19>; -}; - -Clock consumer with only one, _AHB_ sink. -timer0: timer@80088000 { - compatible = "alphascale,asm9260-timer"; - reg = <0x80088000 0x4000>; - clocks = <&acc CLKID_AHB_TIMER0>; - interrupts = <29>; -}; - diff --git a/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml b/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml new file mode 100644 index 000000000000..1caad419ce9d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/alphascale,asm9260-clock-controller.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/alphascale,asm9260-clock-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Alphascale Clock Controller + +maintainers: + - Oleksij Rempel + +description: | + The ACC (Alphascale Clock Controller) is responsible for choosing proper + clock source, setting dividers and clock gates. + + Simple one-cell clock specifier format is used, where the only cell is used + as an index of the clock inside the provider. + It is encouraged to use dt-binding for clock index definitions. SoC specific + dt-binding should be included to the device tree descriptor. For example + Alphascale ASM9260: + + #include + + This binding contains two types of clock providers: + + _AHB_ - AHB gate; + _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider. + + All clock specific details can be found in the SoC documentation. + +properties: + compatible: + const: alphascale,asm9260-clock-controller + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false -- cgit v1.2.3 From 4c55936671db32dc72ab0ceb2b8aeee0184ef38c Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 2 Jun 2025 10:19:36 -0400 Subject: dt-bindings: clock: convert lpc1850-ccu.txt to yaml format Convert lpc1850-ccu.txt to yaml format. Additional changes: - remove label in examples. - remove clock consumer in examples. Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20250602141937.942091-1-Frank.Li@nxp.com Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/lpc1850-ccu.txt | 77 --------------- .../devicetree/bindings/clock/nxp,lpc1850-ccu.yaml | 104 +++++++++++++++++++++ 2 files changed, 104 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/lpc1850-ccu.txt create mode 100644 Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt deleted file mode 100644 index 8cf8f0ecdd16..000000000000 --- a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt +++ /dev/null @@ -1,77 +0,0 @@ -* NXP LPC1850 Clock Control Unit (CCU) - -Each CGU base clock has several clock branches which can be turned on -or off independently by the Clock Control Units CCU1 or CCU2. The -branch clocks are distributed between CCU1 and CCU2. - - - Above text taken from NXP LPC1850 User Manual. - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible: - Should be "nxp,lpc1850-ccu" -- reg: - Shall define the base and range of the address space - containing clock control registers -- #clock-cells: - Shall have value <1>. The permitted clock-specifier values - are the branch clock names defined in table below. -- clocks: - Shall contain a list of phandles for the base clocks routed - from the CGU to the specific CCU. See mapping of base clocks - and CCU in table below. -- clock-names: - Shall contain a list of names for the base clock routed - from the CGU to the specific CCU. Valid CCU clock names: - "base_usb0_clk", "base_periph_clk", "base_usb1_clk", - "base_cpu_clk", "base_spifi_clk", "base_spi_clk", - "base_apb1_clk", "base_apb3_clk", "base_adchs_clk", - "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk", - "base_uart0_clk", "base_uart1_clk", "base_uart2_clk", - "base_uart3_clk", "base_audio_clk" - -Which branch clocks that are available on the CCU depends on the -specific LPC part. Check the user manual for your specific part. - -A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h. - -Example board file: - -soc { - ccu1: clock-controller@40051000 { - compatible = "nxp,lpc1850-ccu"; - reg = <0x40051000 0x1000>; - #clock-cells = <1>; - clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, - <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, - <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, - <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; - clock-names = "base_apb3_clk", "base_apb1_clk", - "base_spifi_clk", "base_cpu_clk", - "base_periph_clk", "base_usb0_clk", - "base_usb1_clk", "base_spi_clk"; - }; - - ccu2: clock-controller@40052000 { - compatible = "nxp,lpc1850-ccu"; - reg = <0x40052000 0x1000>; - #clock-cells = <1>; - clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, - <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, - <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, - <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; - clock-names = "base_audio_clk", "base_uart3_clk", - "base_uart2_clk", "base_uart1_clk", - "base_uart0_clk", "base_ssp1_clk", - "base_ssp0_clk", "base_sdio_clk"; - }; - - /* A user of CCU branch clocks */ - uart1: serial@40082000 { - ... - clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml new file mode 100644 index 000000000000..5459038cc954 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,lpc1850-ccu.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nxp,lpc1850-ccu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1850 Clock Control Unit (CCU) + +description: + Each CGU base clock has several clock branches which can be turned on + or off independently by the Clock Control Units CCU1 or CCU2. The + branch clocks are distributed between CCU1 and CCU2. + + Above text taken from NXP LPC1850 User Manual + +maintainers: + - Frank Li + +properties: + compatible: + const: nxp,lpc1850-ccu + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8 + items: + enum: + - base_usb0_clk + - base_periph_clk + - base_usb1_clk + - base_cpu_clk + - base_spifi_clk + - base_spi_clk + - base_apb1_clk + - base_apb3_clk + - base_adchs_clk + - base_sdio_clk + - base_ssp0_clk + - base_ssp1_clk + - base_uart0_clk + - base_uart1_clk + - base_uart2_clk + - base_uart3_clk + - base_audio_clk + description: + Which branch clocks that are available on the CCU depends on the + specific LPC part. Check the user manual for your specific part. + + A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h. + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + - | + #include + + clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + -- cgit v1.2.3 From e51c16f9ee90eb08b896bb1b86f117b1e4901ba9 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Thu, 17 Jul 2025 08:54:44 +0200 Subject: dt-bindings: clock: qcom: Remove double colon from description No double colon is necessary in the description. Fix it for all bindings so future bindings won't have the same copy-paste mistake. Reported-by: Rob Herring Closes: https://lore.kernel.org/lkml/20250625150458.GA1182597-robh@kernel.org/ Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20250717-bindings-double-colon-v1-1-c04abc180fcd@fairphone.com Reviewed-by: Krzysztof Kozlowski Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml | 2 +- Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml | 2 +- 59 files changed, 59 insertions(+), 59 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml index 3fd3dc1069fb..5c3ff37ec0d7 100644 --- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM8250. - See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h + See also: include/dt-bindings/clock/qcom,camcc-sm8250.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml index 0a3ef7fd03fa..ef2b1e204430 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks and power domains on SM6125. - See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h + See also: include/dt-bindings/clock/qcom,dispcc-sm6125.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml index 46403b98411f..a602e882e964 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM6350. - See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h + See also: include/dt-bindings/clock/qcom,dispcc-sm6350.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml index 012048921f92..c91039dc100e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml @@ -15,7 +15,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on IPQ4019. - See also:: include/dt-bindings/clock/qcom,gcc-ipq4019.h + See also: include/dt-bindings/clock/qcom,gcc-ipq4019.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 38b9e4283900..00d7df75b3d6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on IPQ8074. - See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h + See also: include/dt-bindings/clock/qcom,gcc-ipq8074.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml index cd49704dcb95..92195091a919 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on MSM8976. - See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h + See also: include/dt-bindings/clock/qcom,gcc-msm8976.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml index 10afe984e2fb..93bcd61461e7 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on MSM8994 and MSM8992. - See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h + See also: include/dt-bindings/clock/qcom,gcc-msm8994.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml index 013fd074a8d5..64796f45f294 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module which provides the clocks, resets and power domains on MSM8996. - See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h + See also: include/dt-bindings/clock/qcom,gcc-msm8996.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml index abae658c0ed9..d882f2b6620e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on MSM8998. - See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h + See also: include/dt-bindings/clock/qcom,gcc-msm8998.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml index 38c4c8c61b3a..b9194fa11e47 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on QCM2290. - See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h + See also: include/dt-bindings/clock/qcom,gcc-qcm2290.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml index 94755465c1fb..6b35a3c080a2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on QCS404. - See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h + See also: include/dt-bindings/clock/qcom,gcc-qcs404.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index 1847bbeaa9d1..e30d1df3eeb5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SC7180. - See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h + See also: include/dt-bindings/clock/qcom,gcc-sc7180.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml index 4e4f68b9f6d2..5ddaf27bb1f4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SC7280. - See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h + See also: include/dt-bindings/clock/qcom,gcc-sc7280.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml index b4784ecaf58d..82c2ef39934d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SC8180x. - See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h + See also: include/dt-bindings/clock/qcom,gcc-sc8180x.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml index 5cfde8a4de4e..c1eeccef66b4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SC8280xp. - See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h + See also: include/dt-bindings/clock/qcom,gcc-sc8280xp.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml index ef0a20456e8a..a7523a414341 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SDM670 and SDM845 - See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h + See also: include/dt-bindings/clock/qcom,gcc-sdm845.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml index 30819f3d85c6..320e4f5b2b18 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SDX55 - See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h + See also: include/dt-bindings/clock/qcom,gcc-sdx55.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml index 915449228668..9242e6e19139 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SDX65 - See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h + See also: include/dt-bindings/clock/qcom,gcc-sdx65.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml index ecb69c707f09..c926630907c5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM4250/6115. - See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h + See also: include/dt-bindings/clock/qcom,gcc-sm6115.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml index 1fe68e07a2b2..5bd422e94a38 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM6125. - See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h + See also: include/dt-bindings/clock/qcom,gcc-sm6125.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml index 78e232fa95dc..819e855eaf9a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM6350. - See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h + See also: include/dt-bindings/clock/qcom,gcc-sm6350.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 1dcf97c0c064..5f3f69fe9ddb 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8150. - See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h + See also: include/dt-bindings/clock/qcom,gcc-sm8150.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index 979ff0a8bf68..f4cd5a509c60 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8250. - See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h + See also: include/dt-bindings/clock/qcom,gcc-sm8250.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml index 594e87f5ba09..97ffae3b5522 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8350. - See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h + See also: include/dt-bindings/clock/qcom,gcc-sm8350.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml index 77273aee5d52..3169ac05e1d8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8450 - See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h + See also: include/dt-bindings/clock/qcom,gcc-sm8450.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml index b9b218ef9b68..374de7a6f8d9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm graphics clock control module provides the clocks, resets and power domains on MSM8998. - See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h + See also: include/dt-bindings/clock/qcom,gpucc-msm8998.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml index 243be4f76db3..4a533b45eec2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on qcm2290. - See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h + See also: include/dt-bindings/clock/qcom,dispcc-qcm2290.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml index fd21df0e7697..3038307ff2c5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control module which supports the clocks, resets on QDU1000 and QRU1000 - See also:: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h + See also: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml index 86befef02650..2c5a9ef4fe4d 100644 --- a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module which supports the clocks, resets and power domains on QDU1000 and QRU1000 - See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h + See also: include/dt-bindings/clock/qcom,qdu1000-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml index addbd323fa6d..c641aac8c451 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on sa8775p. - See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h + See also: include/dt-bindings/clock/qcom,sa8775p-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml index c7fe6400ea13..98ee9be84794 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SC7180. - See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h + See also: include/dt-bindings/clock/qcom,camcc-sc7180.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 0d8ea44d8141..f147d06ad2ef 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SC7180. - See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h + See also: include/dt-bindings/clock/qcom,dispcc-sc7180.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml index fdfb389083c1..ad360debef7c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm LPASS core clock control module provides the clocks and power domains on SC7180. - See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h + See also: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml index dcef8de3a905..2f28be58e82e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SC7280. - See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h + See also: include/dt-bindings/clock/qcom,camcc-sc7280.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml index 23177661be40..95b1e4f48c4f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SC7280. - See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h + See also: include/dt-bindings/clock/qcom,dispcc-sc7280.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml index f44c5c130d2d..a90961d8656c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm LPASS core clock control module provides the clocks and power domains on SC7280. - See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h + See also: include/dt-bindings/clock/qcom,lpass-sc7280.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml index fa95c3a1ba3a..6214e41eec1f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SDM845. - See also:: include/dt-bindings/clock/qcom,camcc-sm845.h + See also: include/dt-bindings/clock/qcom,camcc-sm845.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index 220f4004f7fd..854c391c8307 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SDM845. - See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h + See also: include/dt-bindings/clock/qcom,dispcc-sdm845.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml index a96fd837c70a..f9feb7049b21 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml @@ -12,7 +12,7 @@ maintainers: description: | Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller. - See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h + See also: include/dt-bindings/clock/qcom,lpass-sdm845.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml index 567182aba300..29a0b29bcb81 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SDX75 - See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h + See also: include/dt-bindings/clock/qcom,sdx75-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml index f54ce865880d..0b340b2f3205 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM4450 - See also:: include/dt-bindings/clock/qcom,sm4450-camcc.h + See also: include/dt-bindings/clock/qcom,sm4450-camcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml index 2aa05353eff1..378f05e5988c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM4450 - See also:: include/dt-bindings/clock/qcom,sm4450-dispcc.h + See also: include/dt-bindings/clock/qcom,sm4450-dispcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml index 0ac92d7871e1..9cfe859bacc9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-gcc.yaml @@ -14,7 +14,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM4450 - See also:: include/dt-bindings/clock/qcom,sm4450-gcc.h + See also: include/dt-bindings/clock/qcom,sm4450-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml index 00be36683eb5..b31424306f49 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks and power domains on SM6115. - See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h + See also: include/dt-bindings/clock/qcom,sm6115-dispcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml index 4ff17a91344b..104ba10ca573 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm graphics clock control module provides clocks, resets and power domains on Qualcomm SoCs. - See also:: include/dt-bindings/clock/qcom,sm6115-gpucc.h + See also: include/dt-bindings/clock/qcom,sm6115-gpucc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml index 10a9c96a97b6..12d6f0cdbcd8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm graphics clock control module provides clocks and power domains on Qualcomm SoCs. - See also:: include/dt-bindings/clock/qcom,sm6125-gpucc.h + See also: include/dt-bindings/clock/qcom,sm6125-gpucc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml index c03b30f64f35..ba6f4c4d295e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM6350. - See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h + See also: include/dt-bindings/clock/qcom,sm6350-camcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml index 3cd422a645fd..519ea76cb052 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM6375. - See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h + See also: include/dt-bindings/clock/qcom,dispcc-sm6375.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml index de4e9066eeb8..66dfa72fa975 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM6375 - See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h + See also: include/dt-bindings/clock/qcom,sm6375-gcc.h allOf: - $ref: qcom,gcc.yaml# diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml index d9dd479c17bd..3aad6b5bb1c5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm graphics clock control module provides clocks, resets and power domains on Qualcomm SoCs. - See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h + See also: include/dt-bindings/clock/qcom,sm6375-gpucc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml index 7be4b10c430c..b96091c28c5a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-camcc.yaml @@ -15,7 +15,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM7150. - See also:: include/dt-bindings/clock/qcom,sm7150-camcc.h + See also: include/dt-bindings/clock/qcom,sm7150-camcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml index b8d6e1d05ce2..13ab3359b592 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-dispcc.yaml @@ -15,7 +15,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM7150. - See also:: include/dt-bindings/clock/qcom,sm7150-dispcc.h + See also: include/dt-bindings/clock/qcom,sm7150-dispcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml index 4d7bbbf4ce8a..3878808f811e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml @@ -15,7 +15,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM7150 - See also:: include/dt-bindings/clock/qcom,sm7150-gcc.h + See also: include/dt-bindings/clock/qcom,sm7150-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml index 037ffc71e70e..9f7928730386 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-videocc.yaml @@ -15,7 +15,7 @@ description: | Qualcomm video clock control module provides the clocks, resets and power domains on SM7150. - See also:: include/dt-bindings/clock/qcom,videocc-sm7150.h + See also: include/dt-bindings/clock/qcom,videocc-sm7150.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml index 5e9f62d7866c..a210ec9d820c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm camera clock control module provides the clocks, resets and power domains on SM8150. - See also:: include/dt-bindings/clock/qcom,sm8150-camcc.h + See also: include/dt-bindings/clock/qcom,sm8150-camcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml index e9123bbfd491..bd131a1ff165 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm display clock control module provides the clocks, resets and power domains on SM8450. - See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h + See also: include/dt-bindings/clock/qcom,sm8450-dispcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml index d83b64dcce4f..c4e9b9bb63f5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8550 - See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h + See also: include/dt-bindings/clock/qcom,sm8550-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml index 976f29cce809..c7143e2abc80 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8650 - See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h + See also: include/dt-bindings/clock/qcom,sm8650-gcc.h properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml index 28797d0c5d8d..68dde0720c71 100644 --- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -13,7 +13,7 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on X1E80100 - See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h + See also: include/dt-bindings/clock/qcom,x1e80100-gcc.h properties: compatible: -- cgit v1.2.3 From 1eef76f463042890fbcb8bac77baa32fa4f31d86 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:16 -0500 Subject: dt-bindings: clock: Convert qcom,krait-cc to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232617.3699954-1-robh@kernel.org [sboyd@kernel.org: Update to korg] Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/qcom,krait-cc.txt | 34 ----------------- .../devicetree/bindings/clock/qcom,krait-cc.yaml | 43 ++++++++++++++++++++++ 2 files changed, 43 insertions(+), 34 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt deleted file mode 100644 index 030ba60dab08..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt +++ /dev/null @@ -1,34 +0,0 @@ -Krait Clock Controller - -PROPERTIES - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,krait-cc-v1" - "qcom,krait-cc-v2" - -- #clock-cells: - Usage: required - Value type: - Definition: must be 1 - -- clocks: - Usage: required - Value type: - Definition: reference to the clock parents of hfpll, secondary muxes. - -- clock-names: - Usage: required - Value type: - Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb". - -Example: - - kraitcc: clock-controller { - compatible = "qcom,krait-cc-v1"; - clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, ; - clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb"; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml b/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml new file mode 100644 index 000000000000..d6a019371fcf --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,krait-cc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Krait Clock Controller + +maintainers: + - Stephen Boyd + +properties: + compatible: + enum: + - qcom,krait-cc-v1 + - qcom,krait-cc-v2 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: Parent clock phandle for hfpll0 + - description: Parent clock phandle for hfpll1 + - description: Parent clock phandle for acpu0_aux + - description: Parent clock phandle for acpu1_aux + - description: Parent clock phandle for qsb + + clock-names: + items: + - const: hfpll0 + - const: hfpll1 + - const: acpu0_aux + - const: acpu1_aux + - const: qsb + +required: + - compatible + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false -- cgit v1.2.3 From 1a25e13de69dafd4c1d1821df80f89dad036f9bb Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:57 -0500 Subject: dt-bindings: clock: Convert maxim,max9485 to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232658.3701225-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/maxim,max9485.txt | 59 ---------------- .../devicetree/bindings/clock/maxim,max9485.yaml | 82 ++++++++++++++++++++++ 2 files changed, 82 insertions(+), 59 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/maxim,max9485.txt create mode 100644 Documentation/devicetree/bindings/clock/maxim,max9485.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt deleted file mode 100644 index b8f5c3bbf12b..000000000000 --- a/Documentation/devicetree/bindings/clock/maxim,max9485.txt +++ /dev/null @@ -1,59 +0,0 @@ -Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator - -This device exposes 4 clocks in total: - -- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz -- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete - frequencies -- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT - -MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set -requests. - -Required properties: -- compatible: "maxim,max9485" -- clocks: Input clock, must provide 27.000 MHz -- clock-names: Must be set to "xclk" -- #clock-cells: From common clock binding; shall be set to 1 - -Optional properties: -- reset-gpios: GPIO descriptor connected to the #RESET input pin -- vdd-supply: A regulator node for Vdd -- clock-output-names: Name of output clocks, as defined in common clock - bindings - -If not explicitly set, the output names are "mclkout", "clkout", "clkout1" -and "clkout2". - -Clocks are defined as preprocessor macros in the dt-binding header. - -Example: - - #include - - xo-27mhz: xo-27mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - - &i2c0 { - max9485: audio-clock@63 { - reg = <0x63>; - compatible = "maxim,max9485"; - clock-names = "xclk"; - clocks = <&xo-27mhz>; - reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - vdd-supply = <&3v3-reg>; - #clock-cells = <1>; - }; - }; - - // Clock consumer node - - foo@0 { - compatible = "bar,foo"; - /* ... */ - clock-names = "foo-input-clk"; - clocks = <&max9485 MAX9485_CLKOUT1>; - }; diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.yaml b/Documentation/devicetree/bindings/clock/maxim,max9485.yaml new file mode 100644 index 000000000000..f9d8941c7235 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max9485.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/maxim,max9485.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX9485 Programmable Audio Clock Generator + +maintainers: + - Daniel Mack + +description: > + Maxim MAX9485 Programmable Audio Clock Generator exposes 4 clocks in total: + + - MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz + - MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete + frequencies + - MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT + + MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set + requests. + +properties: + compatible: + const: maxim,max9485 + + reg: + maxItems: 1 + + clocks: + description: Input clock. Must provide 27 MHz + maxItems: 1 + + clock-names: + items: + - const: xclk + + '#clock-cells': + const: 1 + + reset-gpios: + description: > + GPIO descriptor connected to the #RESET input pin + + vdd-supply: + description: A regulator node for Vdd + + clock-output-names: + description: Name of output clocks, as defined in common clock bindings + items: + - const: mclkout + - const: clkout + - const: clkout1 + - const: clkout2 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + clock-controller@63 { + compatible = "maxim,max9485"; + reg = <0x63>; + #clock-cells = <1>; + clock-names = "xclk"; + clocks = <&xo_27mhz>; + reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_3v3>; + }; + }; -- cgit v1.2.3 From ce2930aefb398e004eb733897b4b5302582f6809 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:51 -0500 Subject: dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232652.3701007-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/microchip,pic32.txt | 39 ------------------- .../bindings/clock/microchip,pic32mzda-clk.yaml | 45 ++++++++++++++++++++++ 2 files changed, 45 insertions(+), 39 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt deleted file mode 100644 index c93d88fdd858..000000000000 --- a/Documentation/devicetree/bindings/clock/microchip,pic32.txt +++ /dev/null @@ -1,39 +0,0 @@ -Microchip PIC32 Clock Controller Binding ----------------------------------------- -Microchip clock controller is consists of few oscillators, PLL, multiplexer -and few divider modules. - -This binding uses common clock bindings. -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible: shall be "microchip,pic32mzda-clk". -- reg: shall contain base address and length of clock registers. -- #clock-cells: shall be 1. - -Optional properties: -- microchip,pic32mzda-sosc: shall be added only if platform has - secondary oscillator connected. - -Example: - rootclk: clock-controller@1f801200 { - compatible = "microchip,pic32mzda-clk"; - reg = <0x1f801200 0x200>; - #clock-cells = <1>; - /* optional */ - microchip,pic32mzda-sosc; - }; - - -The clock consumer shall specify the desired clock-output of the clock -controller (as defined in [2]) by specifying output-id in its "clock" -phandle cell. -[2] include/dt-bindings/clock/microchip,pic32-clock.h - -For example for UART2: -uart2: serial@2 { - compatible = "microchip,pic32mzda-uart"; - reg = <>; - interrupts = <>; - clocks = <&rootclk PB2CLK>; -}; diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml b/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml new file mode 100644 index 000000000000..a14a838140f1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,pic32mzda-clk.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,pic32mzda-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC32MZDA Clock Controller + +maintainers: + - Purna Chandra Mandal + +description: + Microchip clock controller consists of a few oscillators, PLL, multiplexer + and divider modules. + +properties: + compatible: + const: microchip,pic32mzda-clk + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + microchip,pic32mzda-sosc: + description: Presence of secondary oscillator. + type: boolean + +required: + - compatible + - reg + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@1f801200 { + compatible = "microchip,pic32mzda-clk"; + reg = <0x1f801200 0x200>; + #clock-cells = <1>; + /* optional */ + microchip,pic32mzda-sosc; + }; -- cgit v1.2.3 From f2cb67d73afdf8fd92bec54caf43a246719dd0e6 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:43 -0500 Subject: dt-bindings: clock: Convert moxa,moxart-clock to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232644.3700781-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/moxa,moxart-clock.txt | 48 ---------------------- .../bindings/clock/moxa,moxart-clock.yaml | 38 +++++++++++++++++ 2 files changed, 38 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt deleted file mode 100644 index fedea84314a1..000000000000 --- a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt +++ /dev/null @@ -1,48 +0,0 @@ -Device Tree Clock bindings for arch-moxart - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -MOXA ART SoCs allow to determine PLL output and APB frequencies -by reading registers holding multiplier and divisor information. - - -PLL: - -Required properties: -- compatible : Must be "moxa,moxart-pll-clock" -- #clock-cells : Should be 0 -- reg : Should contain registers location and length -- clocks : Should contain phandle + clock-specifier for the parent clock - -Optional properties: -- clock-output-names : Should contain clock name - - -APB: - -Required properties: -- compatible : Must be "moxa,moxart-apb-clock" -- #clock-cells : Should be 0 -- reg : Should contain registers location and length -- clocks : Should contain phandle + clock-specifier for the parent clock - -Optional properties: -- clock-output-names : Should contain clock name - - -For example: - - clk_pll: clk_pll@98100000 { - compatible = "moxa,moxart-pll-clock"; - #clock-cells = <0>; - reg = <0x98100000 0x34>; - }; - - clk_apb: clk_apb@98100000 { - compatible = "moxa,moxart-apb-clock"; - #clock-cells = <0>; - reg = <0x98100000 0x34>; - clocks = <&clk_pll>; - }; diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml new file mode 100644 index 000000000000..bcf7cc240eba --- /dev/null +++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/moxa,moxart-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART Clock Controllers + +maintainers: + - Krzysztof Kozlowski + +description: + MOXA ART SoCs allow to determine PLL output and APB frequencies by reading + registers holding multiplier and divisor information. + +properties: + compatible: + enum: + - moxa,moxart-apb-clock + - moxa,moxart-pll-clock + + "#clock-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-output-names: true + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + - reg -- cgit v1.2.3 From 71b80a33653debf0374498e6f4141aae43038d0b Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:36 -0500 Subject: dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232637.3700584-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../bindings/clock/nuvoton,npcm750-clk.txt | 100 --------------------- .../bindings/clock/nuvoton,npcm750-clk.yaml | 66 ++++++++++++++ 2 files changed, 66 insertions(+), 100 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt deleted file mode 100644 index f82064546d11..000000000000 --- a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt +++ /dev/null @@ -1,100 +0,0 @@ -* Nuvoton NPCM7XX Clock Controller - -Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which -generates and supplies clocks to all modules within the BMC. - -External clocks: - -There are six fixed clocks that are generated outside the BMC. All clocks are of -a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and -clk_sysbypck are inputs to the clock controller. -clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the -network. They are set on the device tree, but not used by the clock module. The -network devices use them directly. -Example can be found below. - -All available clocks are defined as preprocessor macros in: -dt-bindings/clock/nuvoton,npcm7xx-clock.h -and can be reused as DT sources. - -Required Properties of clock controller: - - - compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton - Poleg BMC NPCM750 - - - reg: physical base address of the clock controller and length of - memory mapped region. - - - #clock-cells: should be 1. - -Example: Clock controller node: - - clk: clock-controller@f0801000 { - compatible = "nuvoton,npcm750-clk"; - #clock-cells = <1>; - reg = <0xf0801000 0x1000>; - clock-names = "refclk", "sysbypck", "mcbypck"; - clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; - }; - -Example: Required external clocks for network: - - /* external reference clock */ - clk_refclk: clk-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "refclk"; - }; - - /* external reference clock for cpu. float in normal operation */ - clk_sysbypck: clk-sysbypck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <800000000>; - clock-output-names = "sysbypck"; - }; - - /* external reference clock for MC. float in normal operation */ - clk_mcbypck: clk-mcbypck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <800000000>; - clock-output-names = "mcbypck"; - }; - - /* external clock signal rg1refck, supplied by the phy */ - clk_rg1refck: clk-rg1refck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "clk_rg1refck"; - }; - - /* external clock signal rg2refck, supplied by the phy */ - clk_rg2refck: clk-rg2refck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "clk_rg2refck"; - }; - - clk_xin: clk-xin { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "clk_xin"; - }; - - -Example: GMAC controller node that consumes two clocks: a generated clk by the -clock controller and a fixed clock from DT (clk_rg1refck). - - ethernet0: ethernet@f0802000 { - compatible = "snps,dwmac"; - reg = <0xf0802000 0x2000>; - interrupts = <0 14 4>; - interrupt-names = "macirq"; - clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; - clock-names = "stmmaceth", "clk_gmac"; - }; diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml new file mode 100644 index 000000000000..694dac68619c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nuvoton,npcm750-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM7XX Clock Controller + +maintainers: + - Tali Perry + +description: > + Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which + generates and supplies clocks to all modules within the BMC. + + External clocks: + + There are six fixed clocks that are generated outside the BMC. All clocks are of + a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and + clk_sysbypck are inputs to the clock controller. + clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the + network. They are set on the device tree, but not used by the clock module. The + network devices use them directly. + + All available clocks are defined as preprocessor macros in: + dt-bindings/clock/nuvoton,npcm7xx-clock.h + and can be reused as DT sources. + +properties: + compatible: + const: nuvoton,npcm750-clk + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-names: + items: + - const: refclk + - const: sysbypck + - const: mcbypck + + clocks: + items: + - description: refclk + - description: sysbypck + - description: mcbypck + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@f0801000 { + compatible = "nuvoton,npcm750-clk"; + #clock-cells = <1>; + reg = <0xf0801000 0x1000>; + clock-names = "refclk", "sysbypck", "mcbypck"; + clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; + }; -- cgit v1.2.3 From 3849ceec49dfb8aee24c2c9c96e1bec1138577c1 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 30 Jun 2025 18:26:24 -0500 Subject: dt-bindings: clock: Convert qca,ath79-pll to DT schema Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250630232625.3700213-1-robh@kernel.org Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/qca,ath79-pll.txt | 33 ---------- .../devicetree/bindings/clock/qca,ath79-pll.yaml | 70 ++++++++++++++++++++++ 2 files changed, 70 insertions(+), 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt create mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt deleted file mode 100644 index 241fb0545b9e..000000000000 --- a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller - -The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. - -Required Properties: -- compatible: has to be "qca,-pll" and one of the following - fallbacks: - - "qca,ar7100-pll" - - "qca,ar7240-pll" - - "qca,ar9130-pll" - - "qca,ar9330-pll" - - "qca,ar9340-pll" - - "qca,qca9550-pll" -- reg: Base address and size of the controllers memory area -- clock-names: Name of the input clock, has to be "ref" -- clocks: phandle of the external reference clock -- #clock-cells: has to be one - -Optional properties: -- clock-output-names: should be "cpu", "ddr", "ahb" - -Example: - - pll-controller@18050000 { - compatible = "qca,ar9132-pll", "qca,ar9130-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - clocks = <&extosc>; - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml b/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml new file mode 100644 index 000000000000..69863e8a4648 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qca,ath79-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros ATH79 PLL controller + +maintainers: + - Alban Bedel + - Antony Pavlov + +description: > + The PLL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. + +properties: + compatible: + oneOf: + - items: + - const: qca,ar9132-pll + - const: qca,ar9130-pll + - items: + - enum: + - qca,ar7100-pll + - qca,ar7240-pll + - qca,ar9130-pll + - qca,ar9330-pll + - qca,ar9340-pll + - qca,qca9530-pll + - qca,qca9550-pll + - qca,qca9560-pll + + reg: + maxItems: 1 + + clock-names: + items: + - const: ref + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-output-names: + items: + - const: cpu + - const: ddr + - const: ahb + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@18050000 { + compatible = "qca,ar9132-pll", "qca,ar9130-pll"; + reg = <0x18050000 0x20>; + clock-names = "ref"; + clocks = <&extosc>; + #clock-cells = <1>; + clock-output-names = "cpu", "ddr", "ahb"; + }; -- cgit v1.2.3 From 17a6d7ceceeaf1e9696de689fea6d8a13ab68f99 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Fri, 6 Jun 2025 12:24:09 -0400 Subject: dt-bindings: clock: convert lpc1850-cgu.txt to yaml format Convert lpc1850-cgu.txt to yaml format. Additional changes: - remove extra clock source nodes in example. - remove clock consumer in example. - remove clock-output-names and clock-clock-indices from required list to match existed dts. Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20250606162410.1361169-1-Frank.Li@nxp.com Reviewed-by: Rob Herring (Arm) Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/lpc1850-cgu.txt | 131 --------------------- .../devicetree/bindings/clock/nxp,lpc1850-cgu.yaml | 99 ++++++++++++++++ 2 files changed, 99 insertions(+), 131 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/lpc1850-cgu.txt create mode 100644 Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt deleted file mode 100644 index 2cc32a9a945a..000000000000 --- a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt +++ /dev/null @@ -1,131 +0,0 @@ -* NXP LPC1850 Clock Generation Unit (CGU) - -The CGU generates multiple independent clocks for the core and the -peripheral blocks of the LPC18xx. Each independent clock is called -a base clock and itself is one of the inputs to the two Clock -Control Units (CCUs) which control the branch clocks to the -individual peripherals. - -The CGU selects the inputs to the clock generators from multiple -clock sources, controls the clock generation, and routes the outputs -of the clock generators through the clock source bus to the output -stages. Each output stage provides an independent clock source and -corresponds to one of the base clocks for the LPC18xx. - - - Above text taken from NXP LPC1850 User Manual. - - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible: - Should be "nxp,lpc1850-cgu" -- reg: - Shall define the base and range of the address space - containing clock control registers -- #clock-cells: - Shall have value <1>. The permitted clock-specifier values - are the base clock numbers defined below. -- clocks: - Shall contain a list of phandles for the external input - sources to the CGU. The list shall be in the following - order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin. -- clock-indices: - Shall be an ordered list of numbers defining the base clock - number provided by the CGU. -- clock-output-names: - Shall be an ordered list of strings defining the names of - the clocks provided by the CGU. - -Which base clocks that are available on the CGU depends on the -specific LPC part. Base clocks are numbered from 0 to 27. - -Number: Name: Description: - 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT - 1 BASE_USB0_CLK Base clock for USB0 - 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem, - SPI, and SGPIO - 3 BASE_USB1_CLK Base clock for USB1 - 4 BASE_CPU_CLK System base clock for ARM Cortex-M core - and APB peripheral blocks #0 and #2 - 5 BASE_SPIFI_CLK Base clock for SPIFI - 6 BASE_SPI_CLK Base clock for SPI - 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock - 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock - 9 BASE_APB1_CLK Base clock for APB peripheral block # 1 -10 BASE_APB3_CLK Base clock for APB peripheral block # 3 -11 BASE_LCD_CLK Base clock for LCD -12 BASE_ADCHS_CLK Base clock for ADCHS -13 BASE_SDIO_CLK Base clock for SD/MMC -14 BASE_SSP0_CLK Base clock for SSP0 -15 BASE_SSP1_CLK Base clock for SSP1 -16 BASE_UART0_CLK Base clock for UART0 -17 BASE_UART1_CLK Base clock for UART1 -18 BASE_UART2_CLK Base clock for UART2 -19 BASE_UART3_CLK Base clock for UART3 -20 BASE_OUT_CLK Base clock for CLKOUT pin -24-21 - Reserved -25 BASE_AUDIO_CLK Base clock for audio system (I2S) -26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output -27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output - -BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx. -BASE_ADCHS_CLK is only available on LPC4370. - - -Example board file: - -/ { - clocks { - xtal: xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - xtal32: xtal32 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - enet_rx_clk: enet_rx_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "enet_rx_clk"; - }; - - enet_tx_clk: enet_tx_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "enet_tx_clk"; - }; - - gp_clkin: gp_clkin { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "gp_clkin"; - }; - }; - - soc { - cgu: clock-controller@40050000 { - compatible = "nxp,lpc1850-cgu"; - reg = <0x40050000 0x1000>; - #clock-cells = <1>; - clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; - }; - - /* A CGU and CCU clock consumer */ - lcdc: lcdc@40008000 { - ... - clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; - clock-names = "clcdclk", "apb_pclk"; - ... - }; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml b/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml new file mode 100644 index 000000000000..ed178c7df00c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nxp,lpc1850-cgu.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nxp,lpc1850-cgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1850 Clock Generation Unit (CGU) + +description: > + The CGU generates multiple independent clocks for the core and the + peripheral blocks of the LPC18xx. Each independent clock is called + a base clock and itself is one of the inputs to the two Clock + Control Units (CCUs) which control the branch clocks to the + individual peripherals. + + The CGU selects the inputs to the clock generators from multiple + clock sources, controls the clock generation, and routes the outputs + of the clock generators through the clock source bus to the output + stages. Each output stage provides an independent clock source and + corresponds to one of the base clocks for the LPC18xx. + + Above text taken from NXP LPC1850 User Manual. + +maintainers: + - Frank Li + +properties: + compatible: + const: nxp,lpc1850-cgu + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + Which base clocks that are available on the CGU depends on the + specific LPC part. Base clocks are numbered from 0 to 27. + + Number: Name: Description: + 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT + 1 BASE_USB0_CLK Base clock for USB0 + 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem, + SPI, and SGPIO + 3 BASE_USB1_CLK Base clock for USB1 + 4 BASE_CPU_CLK System base clock for ARM Cortex-M core + and APB peripheral blocks #0 and #2 + 5 BASE_SPIFI_CLK Base clock for SPIFI + 6 BASE_SPI_CLK Base clock for SPI + 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock + 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock + 9 BASE_APB1_CLK Base clock for APB peripheral block # 1 + 10 BASE_APB3_CLK Base clock for APB peripheral block # 3 + 11 BASE_LCD_CLK Base clock for LCD + 12 BASE_ADCHS_CLK Base clock for ADCHS + 13 BASE_SDIO_CLK Base clock for SD/MMC + 14 BASE_SSP0_CLK Base clock for SSP0 + 15 BASE_SSP1_CLK Base clock for SSP1 + 16 BASE_UART0_CLK Base clock for UART0 + 17 BASE_UART1_CLK Base clock for UART1 + 18 BASE_UART2_CLK Base clock for UART2 + 19 BASE_UART3_CLK Base clock for UART3 + 20 BASE_OUT_CLK Base clock for CLKOUT pin + 24-21 - Reserved + 25 BASE_AUDIO_CLK Base clock for audio system (I2S) + 26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output + 27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output + + BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx. + BASE_ADCHS_CLK is only available on LPC4370. + + clocks: + maxItems: 5 + + clock-indices: + minItems: 1 + maxItems: 28 + + clock-output-names: + minItems: 1 + maxItems: 28 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + -- cgit v1.2.3