From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/driver-model/driver.txt | 287 ++++++++++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) create mode 100644 Documentation/driver-model/driver.txt (limited to 'Documentation/driver-model/driver.txt') diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt new file mode 100644 index 000000000000..12447787d329 --- /dev/null +++ b/Documentation/driver-model/driver.txt @@ -0,0 +1,287 @@ + +Device Drivers + +struct device_driver { + char * name; + struct bus_type * bus; + + rwlock_t lock; + atomic_t refcount; + + list_t bus_list; + list_t devices; + + struct driver_dir_entry dir; + + int (*probe) (struct device * dev); + int (*remove) (struct device * dev); + + int (*suspend) (struct device * dev, u32 state, u32 level); + int (*resume) (struct device * dev, u32 level); + + void (*release) (struct device_driver * drv); +}; + + + +Allocation +~~~~~~~~~~ + +Device drivers are statically allocated structures. Though there may +be multiple devices in a system that a driver supports, struct +device_driver represents the driver as a whole (not a particular +device instance). + +Initialization +~~~~~~~~~~~~~~ + +The driver must initialize at least the name and bus fields. It should +also initialize the devclass field (when it arrives), so it may obtain +the proper linkage internally. It should also initialize as many of +the callbacks as possible, though each is optional. + +Declaration +~~~~~~~~~~~ + +As stated above, struct device_driver objects are statically +allocated. Below is an example declaration of the eepro100 +driver. This declaration is hypothetical only; it relies on the driver +being converted completely to the new model. + +static struct device_driver eepro100_driver = { + .name = "eepro100", + .bus = &pci_bus_type, + .devclass = ðernet_devclass, /* when it's implemented */ + + .probe = eepro100_probe, + .remove = eepro100_remove, + .suspend = eepro100_suspend, + .resume = eepro100_resume, +}; + +Most drivers will not be able to be converted completely to the new +model because the bus they belong to has a bus-specific structure with +bus-specific fields that cannot be generalized. + +The most common example of this are device ID structures. A driver +typically defines an array of device IDs that it supports. The format +of these structures and the semantics for comparing device IDs are +completely bus-specific. Defining them as bus-specific entities would +sacrifice type-safety, so we keep bus-specific structures around. + +Bus-specific drivers should include a generic struct device_driver in +the definition of the bus-specific driver. Like this: + +struct pci_driver { + const struct pci_device_id *id_table; + struct device_driver driver; +}; + +A definition that included bus-specific fields would look like +(using the eepro100 driver again): + +static struct pci_driver eepro100_driver = { + .id_table = eepro100_pci_tbl, + .driver = { + .name = "eepro100", + .bus = &pci_bus_type, + .devclass = ðernet_devclass, /* when it's implemented */ + .probe = eepro100_probe, + .remove = eepro100_remove, + .suspend = eepro100_suspend, + .resume = eepro100_resume, + }, +}; + +Some may find the syntax of embedded struct initialization awkward or +even a bit ugly. So far, it's the best way we've found to do what we want... + +Registration +~~~~~~~~~~~~ + +int driver_register(struct device_driver * drv); + +The driver registers the structure on startup. For drivers that have +no bus-specific fields (i.e. don't have a bus-specific driver +structure), they would use driver_register and pass a pointer to their +struct device_driver object. + +Most drivers, however, will have a bus-specific structure and will +need to register with the bus using something like pci_driver_register. + +It is important that drivers register their driver structure as early as +possible. Registration with the core initializes several fields in the +struct device_driver object, including the reference count and the +lock. These fields are assumed to be valid at all times and may be +used by the device model core or the bus driver. + + +Transition Bus Drivers +~~~~~~~~~~~~~~~~~~~~~~ + +By defining wrapper functions, the transition to the new model can be +made easier. Drivers can ignore the generic structure altogether and +let the bus wrapper fill in the fields. For the callbacks, the bus can +define generic callbacks that forward the call to the bus-specific +callbacks of the drivers. + +This solution is intended to be only temporary. In order to get class +information in the driver, the drivers must be modified anyway. Since +converting drivers to the new model should reduce some infrastructural +complexity and code size, it is recommended that they are converted as +class information is added. + +Access +~~~~~~ + +Once the object has been registered, it may access the common fields of +the object, like the lock and the list of devices. + +int driver_for_each_dev(struct device_driver * drv, void * data, + int (*callback)(struct device * dev, void * data)); + +The devices field is a list of all the devices that have been bound to +the driver. The LDM core provides a helper function to operate on all +the devices a driver controls. This helper locks the driver on each +node access, and does proper reference counting on each device as it +accesses it. + + +sysfs +~~~~~ + +When a driver is registered, a sysfs directory is created in its +bus's directory. In this directory, the driver can export an interface +to userspace to control operation of the driver on a global basis; +e.g. toggling debugging output in the driver. + +A future feature of this directory will be a 'devices' directory. This +directory will contain symlinks to the directories of devices it +supports. + + + +Callbacks +~~~~~~~~~ + + int (*probe) (struct device * dev); + +probe is called to verify the existence of a certain type of +hardware. This is called during the driver binding process, after the +bus has verified that the device ID of a device matches one of the +device IDs supported by the driver. + +This callback only verifies that there actually is supported hardware +present. It may allocate a driver-specific structure, but it should +not do any initialization of the hardware itself. The device-specific +structure may be stored in the device's driver_data field. + + int (*init) (struct device * dev); + +init is called during the binding stage. It is called after probe has +successfully returned and the device has been registered with its +class. It is responsible for initializing the hardware. + + int (*remove) (struct device * dev); + +remove is called to dissociate a driver with a device. This may be +called if a device is physically removed from the system, if the +driver module is being unloaded, or during a reboot sequence. + +It is up to the driver to determine if the device is present or +not. It should free any resources allocated specifically for the +device; i.e. anything in the device's driver_data field. + +If the device is still present, it should quiesce the device and place +it into a supported low-power state. + + int (*suspend) (struct device * dev, u32 state, u32 level); + +suspend is called to put the device in a low power state. There are +several stages to successfully suspending a device, which is denoted in +the @level parameter. Breaking the suspend transition into several +stages affords the platform flexibility in performing device power +management based on the requirements of the system and the +user-defined policy. + +SUSPEND_NOTIFY notifies the device that a suspend transition is about +to happen. This happens on system power state transitions to verify +that all devices can successfully suspend. + +A driver may choose to fail on this call, which should cause the +entire suspend transition to fail. A driver should fail only if it +knows that the device will not be able to be resumed properly when the +system wakes up again. It could also fail if it somehow determines it +is in the middle of an operation too important to stop. + +SUSPEND_DISABLE tells the device to stop I/O transactions. When it +stops transactions, or what it should do with unfinished transactions +is a policy of the driver. After this call, the driver should not +accept any other I/O requests. + +SUSPEND_SAVE_STATE tells the device to save the context of the +hardware. This includes any bus-specific hardware state and +device-specific hardware state. A pointer to this saved state can be +stored in the device's saved_state field. + +SUSPEND_POWER_DOWN tells the driver to place the device in the low +power state requested. + +Whether suspend is called with a given level is a policy of the +platform. Some levels may be omitted; drivers must not assume the +reception of any level. However, all levels must be called in the +order above; i.e. notification will always come before disabling; +disabling the device will come before suspending the device. + +All calls are made with interrupts enabled, except for the +SUSPEND_POWER_DOWN level. + + int (*resume) (struct device * dev, u32 level); + +Resume is used to bring a device back from a low power state. Like the +suspend transition, it happens in several stages. + +RESUME_POWER_ON tells the driver to set the power state to the state +before the suspend call (The device could have already been in a low +power state before the suspend call to put in a lower power state). + +RESUME_RESTORE_STATE tells the driver to restore the state saved by +the SUSPEND_SAVE_STATE suspend call. + +RESUME_ENABLE tells the driver to start accepting I/O transactions +again. Depending on driver policy, the device may already have pending +I/O requests. + +RESUME_POWER_ON is called with interrupts disabled. The other resume +levels are called with interrupts enabled. + +As with the various suspend stages, the driver must not assume that +any other resume calls have been or will be made. Each call should be +self-contained and not dependent on any external state. + + +Attributes +~~~~~~~~~~ +struct driver_attribute { + struct attribute attr; + ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off); + ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off); +}; + +Device drivers can export attributes via their sysfs directories. +Drivers can declare attributes using a DRIVER_ATTR macro that works +identically to the DEVICE_ATTR macro. + +Example: + +DRIVER_ATTR(debug,0644,show_debug,store_debug); + +This is equivalent to declaring: + +struct driver_attribute driver_attr_debug; + +This can then be used to add and remove the attribute from the +driver's directory using: + +int driver_create_file(struct device_driver *, struct driver_attribute *); +void driver_remove_file(struct device_driver *, struct driver_attribute *); -- cgit v1.2.3