From 79b804cb6af4f128b2c53f0887c02537a7eb5824 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 20 Sep 2016 15:15:21 +0300 Subject: gpiolib: Make it possible to exclude GPIOs from IRQ domain When using GPIO irqchip helpers to setup irqchip for a gpiolib based driver, it is not possible to select which GPIOs to add to the IRQ domain. Instead it just adds all GPIOs which is not always desired. For example there might be GPIOs that for some reason cannot generated normal interrupts at all. To support this we add a flag irq_need_valid_mask to struct gpio_chip. When this flag is set the core allocates irq_valid_mask that holds one bit for each GPIO the chip has. By default all bits are set but drivers can manipulate this using set_bit() and clear_bit() accordingly. Then when gpiochip_irqchip_add() is called, this mask is checked and all GPIOs with bit is set are added to the IRQ domain created for the GPIO chip. Suggested-by: Linus Walleij Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- Documentation/gpio/driver.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/gpio') diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index 6cb35a78eff4..368d5a294d89 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -262,6 +262,12 @@ symbol: to the container using container_of(). (See Documentation/driver-model/design-patterns.txt) + If there is a need to exclude certain GPIOs from the IRQ domain, one can + set .irq_need_valid_mask of the gpiochip before gpiochip_add_data() is + called. This allocates .irq_valid_mask with as many bits set as there are + GPIOs in the chip. Drivers can exclude GPIOs by clearing bits from this + mask. The mask must be filled in before gpiochip_irqchip_add() is called. + * gpiochip_set_chained_irqchip(): sets up a chained irq handler for a gpio_chip from a parent IRQ and passes the struct gpio_chip* as handler data. (Notice handler data, since the irqchip data is likely used by the -- cgit v1.2.3