From 93ad8a1d59a35ef7b489a83552daee6506f47815 Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Wed, 20 Nov 2013 22:14:34 -0800 Subject: leds: lp5523: Support LED MUX configuration on running a pattern MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are two ways to run a pattern in LP5523. One is using legacy sysfs files such as 'enginex_mode','enginex_load' and 'enginex_leds'. ('x' is from 1 to 3). Among them, 'enginex_leds' are used for selecting specific LED channel MUX. (MUX means which LEDs are used for running a pattern from LED 1 to 9.) The other way is using the firmware interface. In this mode, the default LED MUX strings are used. In other words, LED MUX is not configurable on the fly. This patch enables dynamic LED MUX configuration when the firmware is loaded. By accessing the sysfs file 'enginex_leds', the LED channels can be configured. To synchronize the operation mode, each engine mode should be set to 'LOAD'. The documentation is updated as well. Cc: Pali Rohár Signed-off-by: Milo Kim Signed-off-by: Bryan Wu --- Documentation/leds/leds-lp55xx.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'Documentation/leds') diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt index 82713ff92eb3..bcea12a0c584 100644 --- a/Documentation/leds/leds-lp55xx.txt +++ b/Documentation/leds/leds-lp55xx.txt @@ -73,6 +73,10 @@ select_engine : Select which engine is used for running program run_engine : Start program which is loaded via the firmware interface firmware : Load program data +In case of LP5523, one more command is required, 'enginex_leds'. +It is used for selecting LED output(s) at each engine number. +In more details, please refer to 'leds-lp5523.txt'. + For example, run blinking pattern in engine #1 of LP5521 echo 1 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp5521/loading @@ -81,10 +85,12 @@ echo 0 > /sys/class/firmware/lp5521/loading echo 1 > /sys/bus/i2c/devices/xxxx/run_engine For example, run blinking pattern in engine #3 of LP55231 +Two LEDs are configured as pattern output channels. echo 3 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp55231/loading echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data echo 0 > /sys/class/firmware/lp55231/loading +echo "000001100" > /sys/bus/i2c/devices/xxxx/engine3_leds echo 1 > /sys/bus/i2c/devices/xxxx/run_engine To start blinking patterns in engine #2 and #3 simultaneously, @@ -99,17 +105,19 @@ done echo 1 > /sys/class/leds/red/device/run_engine Here is another example for LP5523. +Full LED strings are selected by 'engine2_leds'. echo 2 > /sys/bus/i2c/devices/xxxx/select_engine echo 1 > /sys/class/firmware/lp5523/loading echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data echo 0 > /sys/class/firmware/lp5523/loading +echo "111111111" > /sys/bus/i2c/devices/xxxx/engine2_leds echo 1 > /sys/bus/i2c/devices/xxxx/run_engine As soon as 'loading' is set to 0, registered callback is called. Inside the callback, the selected engine is loaded and memory is updated. To run programmed pattern, 'run_engine' attribute should be enabled. -The pattern sqeuence of LP8501 is same as LP5523. +The pattern sqeuence of LP8501 is similar to LP5523. However pattern data is specific. Ex 1) Engine 1 is used echo 1 > /sys/bus/i2c/devices/xxxx/select_engine -- cgit v1.2.3