From 1f70cb4045cba47287fed3ba98dadc7187f13ef8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 26 Aug 2016 16:19:36 +0200 Subject: Documentation: move oneshot trigger attributes documentation to ABI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Documentation of sysfs interface should be in ABI in the first place. This moves relevant part of documentation and mentions where to look for it. Fix trivial typos whilst we are at it. Signed-off-by: Rafał Miłecki Signed-off-by: Jacek Anaszewski --- Documentation/leds/ledtrig-oneshot.txt | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'Documentation/leds') diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.txt index 07cd1fa41a3a..fe57474a12e2 100644 --- a/Documentation/leds/ledtrig-oneshot.txt +++ b/Documentation/leds/ledtrig-oneshot.txt @@ -21,24 +21,8 @@ below: echo oneshot > trigger -This adds the following sysfs attributes to the LED: - - delay_on - specifies for how many milliseconds the LED has to stay at - LED_FULL brightness after it has been armed. - Default to 100 ms. - - delay_off - specifies for how many milliseconds the LED has to stay at - LED_OFF brightness after it has been armed. - Default to 100 ms. - - invert - reverse the blink logic. If set to 0 (default) blink on for delay_on - ms, then blink off for delay_off ms, leaving the LED normally off. If - set to 1, blink off for delay_off ms, then blink on for delay_on ms, - leaving the LED normally on. - Setting this value also immediately change the LED state. - - shot - write any non-empty string to signal an events, this starts a blink - sequence if not already running. +This adds sysfs attributes to the LED that are documented in: +Documentation/ABI/testing/sysfs-class-led-trigger-oneshot Example use-case: network devices, initialization: -- cgit v1.2.3 From be4fdf99fa4dc95aa01144b207caf2cc9fa074d8 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Thu, 8 Sep 2016 07:25:53 +0000 Subject: leds: add driver for Mellanox systems LEDs This makes it possible to create a set of LEDs for Mellanox systems: "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740", "msn2100". Driver obtains LED devices according to system configuration, provided through system DMI data, like mlxcpld:fan1:green, mlxcpld:fan1:red and creates devices in form: "devicename:colour:function". LED setting is controlled through on board CPLD Lattice device. For setting particular LED off, solid, blink: echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger On module probing all LEDs are set green, on removing - off. Last setting overwrites previous, f.e. sequence for changing LED from green - red - green: echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness Note: LEDs cannot be turned on/off simultaneously. The Kconfig currently controlling compilation of this code is: drivers/leds/Kconfig:config LEDS_MLXCPLD Signed-off-by: Vadim Pasternak Reviewed-by: Jiri Pirko Reviewed-by: Wei Yongjun Signed-off-by: Jacek Anaszewski --- Documentation/leds/leds-mlxcpld.txt | 110 ++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/leds/leds-mlxcpld.txt (limited to 'Documentation/leds') diff --git a/Documentation/leds/leds-mlxcpld.txt b/Documentation/leds/leds-mlxcpld.txt new file mode 100644 index 000000000000..a0e8fd457117 --- /dev/null +++ b/Documentation/leds/leds-mlxcpld.txt @@ -0,0 +1,110 @@ +Kernel driver for Mellanox systems LEDs +======================================= + +Provide system LED support for the nex Mellanox systems: +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", +"msn2410", "msb7800", "msn2740", "msn2100". + +Description +----------- +Driver provides the following LEDs for the systems "msx6710", "msx6720", +"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740": + mlxcpld:fan1:green + mlxcpld:fan1:red + mlxcpld:fan2:green + mlxcpld:fan2:red + mlxcpld:fan3:green + mlxcpld:fan3:red + mlxcpld:fan4:green + mlxcpld:fan4:red + mlxcpld:psu:green + mlxcpld:psu:red + mlxcpld:status:green + mlxcpld:status:red + + "status" + CPLD reg offset: 0x20 + Bits [3:0] + + "psu" + CPLD reg offset: 0x20 + Bits [7:4] + + "fan1" + CPLD reg offset: 0x21 + Bits [3:0] + + "fan2" + CPLD reg offset: 0x21 + Bits [7:4] + + "fan3" + CPLD reg offset: 0x22 + Bits [3:0] + + "fan4" + CPLD reg offset: 0x22 + Bits [7:4] + + Color mask for all the above LEDs: + [bit3,bit2,bit1,bit0] or + [bit7,bit6,bit5,bit4]: + [0,0,0,0] = LED OFF + [0,1,0,1] = Red static ON + [1,1,0,1] = Green static ON + [0,1,1,0] = Red blink 3Hz + [1,1,1,0] = Green blink 3Hz + [0,1,1,1] = Red blink 6Hz + [1,1,1,1] = Green blink 6Hz + +Driver provides the following LEDs for the system "msn2100": + mlxcpld:fan:green + mlxcpld:fan:red + mlxcpld:psu1:green + mlxcpld:psu1:red + mlxcpld:psu2:green + mlxcpld:psu2:red + mlxcpld:status:green + mlxcpld:status:red + mlxcpld:uid:blue + + "status" + CPLD reg offset: 0x20 + Bits [3:0] + + "fan" + CPLD reg offset: 0x21 + Bits [3:0] + + "psu1" + CPLD reg offset: 0x23 + Bits [3:0] + + "psu2" + CPLD reg offset: 0x23 + Bits [7:4] + + "uid" + CPLD reg offset: 0x24 + Bits [3:0] + + Color mask for all the above LEDs, excepted uid: + [bit3,bit2,bit1,bit0] or + [bit7,bit6,bit5,bit4]: + [0,0,0,0] = LED OFF + [0,1,0,1] = Red static ON + [1,1,0,1] = Green static ON + [0,1,1,0] = Red blink 3Hz + [1,1,1,0] = Green blink 3Hz + [0,1,1,1] = Red blink 6Hz + [1,1,1,1] = Green blink 6Hz + + Color mask for uid LED: + [bit3,bit2,bit1,bit0]: + [0,0,0,0] = LED OFF + [1,1,0,1] = Blue static ON + [1,1,1,0] = Blue blink 3Hz + [1,1,1,1] = Blue blink 6Hz + +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle). +For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec. -- cgit v1.2.3