From 970e2486492aa1eb47a436a5a4c81e92558986a9 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Fri, 30 Mar 2012 13:37:16 -0700 Subject: Documentation: remove references to /etc/modprobe.conf Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi Acked-by: Takashi Iwai Acked-by: Mauro Carvalho Chehab Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/parport.txt | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'Documentation/parport.txt') diff --git a/Documentation/parport.txt b/Documentation/parport.txt index 93a7ceef398d..c208e4366c03 100644 --- a/Documentation/parport.txt +++ b/Documentation/parport.txt @@ -36,18 +36,17 @@ addresses should not be specified for supported PCI cards since they are automatically detected. -KMod ----- +modprobe +-------- -If you use kmod, you will find it useful to edit /etc/modprobe.conf. -Here is an example of the lines that need to be added: +If you use modprobe , you will find it useful to add lines as below to a +configuration file in /etc/modprobe.d/ directory:. alias parport_lowlevel parport_pc options parport_pc io=0x378,0x278 irq=7,auto -KMod will then automatically load parport_pc (with the options -"io=0x378,0x278 irq=7,auto") whenever a parallel port device driver -(such as lp) is loaded. +modprobe will load parport_pc (with the options "io=0x378,0x278 irq=7,auto") +whenever a parallel port device driver (such as lp) is loaded. Note that these are example lines only! You shouldn't in general need to specify any options to parport_pc in order to be able to use a -- cgit v1.2.3