From d524dac9279b6a41ffdf7ff7958c577f2e387db6 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 26 Jan 2011 10:10:40 -0700 Subject: dt: Move device tree documentation out of powerpc directory The device tree is used by more than just PowerPC. Make the documentation directory available to all. v2: reorganized files while moving to create arch and driver specific directories. Signed-off-by: Grant Likely Acked-by: Josh Boyer --- Documentation/powerpc/dts-bindings/4xx/cpm.txt | 52 -------------------------- 1 file changed, 52 deletions(-) delete mode 100644 Documentation/powerpc/dts-bindings/4xx/cpm.txt (limited to 'Documentation/powerpc/dts-bindings/4xx/cpm.txt') diff --git a/Documentation/powerpc/dts-bindings/4xx/cpm.txt b/Documentation/powerpc/dts-bindings/4xx/cpm.txt deleted file mode 100644 index ee459806d35e..000000000000 --- a/Documentation/powerpc/dts-bindings/4xx/cpm.txt +++ /dev/null @@ -1,52 +0,0 @@ -PPC4xx Clock Power Management (CPM) node - -Required properties: - - compatible : compatible list, currently only "ibm,cpm" - - dcr-access-method : "native" - - dcr-reg : < DCR register range > - -Optional properties: - - er-offset : All 4xx SoCs with a CPM controller have - one of two different order for the CPM - registers. Some have the CPM registers - in the following order (ER,FR,SR). The - others have them in the following order - (SR,ER,FR). For the second case set - er-offset = <1>. - - unused-units : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set to turn off unused - devices. - - idle-doze : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set to turn off unused - devices. This is usually just CPM[CPU]. - - standby : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set on standby and - restored on resume. - - suspend : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set on suspend (mem) and - restored on resume. Note, for standby - and suspend the corresponding bits can - be different or the same. Usually for - standby only class 2 and 3 units are set. - However, the interface does not care. - If they are the same, the additional - power saving will be seeing if support - is available to put the DDR in self - refresh mode and any additional power - saving techniques for the specific SoC. - -Example: - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x160 0x003>; - er-offset = <0>; - unused-units = <0x00000100>; - idle-doze = <0x02000000>; - standby = <0xfeff0000>; - suspend = <0xfeff791d>; -}; -- cgit v1.2.3