From ab99eee8ac902a0e176231447f318a0ed68f45d8 Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Wed, 9 Jan 2008 06:35:07 +1100 Subject: [POWERPC] Xilinx: Update booting-without-of. This now better describes what the UBoot device tree generator actually does. In particular: 1) Nodes have a label derived from the device name, and a node name derived from a generic version of the device type, e.g. 'ethernet', 'serial', etc. 2) Usage of compound nodes (representing more than one device in the same IP) which actually works. This requires having a valid compatible node, and all the other things that a bus normally has. I've chosen 'xlnx,compound' as the bus name to describe these compound nodes. In addition, I've clarified some of the language relating to how mhs nodes should be represent in the device tree. Signed-off-by: Stephen Neuendorffer Signed-off-by: Grant Likely --- Documentation/powerpc/booting-without-of.txt | 56 ++++++++++++++++------------ 1 file changed, 33 insertions(+), 23 deletions(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ee0209a7de3e..a9e2d5ea9a06 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -2292,7 +2292,7 @@ platforms are moved over to use the flattened-device-tree model. properties of the device node. In general, device nodes for IP-cores will take the following form: - (name)@(base-address) { + (name): (generic-name)@(base-address) { compatible = "xlnx,(ip-core-name)-(HW_VER)" [, (list of compatible devices), ...]; reg = <(baseaddr) (size)>; @@ -2302,6 +2302,9 @@ platforms are moved over to use the flattened-device-tree model. xlnx,(parameter2) = <(int-value)>; }; + (generic-name): an open firmware-style name that describes the + generic class of device. Preferably, this is one word, such + as 'serial' or 'ethernet'. (ip-core-name): the name of the ip block (given after the BEGIN directive in system.mhs). Should be in lowercase and all underscores '_' converted to dashes '-'. @@ -2310,9 +2313,9 @@ platforms are moved over to use the flattened-device-tree model. dropped from the parameter name, the name is converted to lowercase and all underscore '_' characters are converted to dashes '-'. - (baseaddr): the C_BASEADDR parameter. + (baseaddr): the baseaddr parameter value (often named C_BASEADDR). (HW_VER): from the HW_VER parameter. - (size): equals C_HIGHADDR - C_BASEADDR + 1 + (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). Typically, the compatible list will include the exact IP core version followed by an older IP core version which implements the same @@ -2342,11 +2345,11 @@ platforms are moved over to use the flattened-device-tree model. becomes the following device tree node: - opb-uartlite-0@ec100000 { + opb_uartlite_0: serial@ec100000 { device_type = "serial"; compatible = "xlnx,opb-uartlite-1.00.b"; reg = ; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <1 0>; // got this from the opb_intc parameters current-speed = ; // standard serial device prop clock-frequency = ; // standard serial device prop @@ -2355,16 +2358,19 @@ platforms are moved over to use the flattened-device-tree model. xlnx,use-parity = <0>; }; - Some IP cores actually implement 2 or more logical devices. In this case, - the device should still describe the whole IP core with a single node - and add a child node for each logical device. The ranges property can - be used to translate from parent IP-core to the registers of each device. - (Note: this makes the assumption that both logical devices have the same - bus binding. If this is not true, then separate nodes should be used for - each logical device). The 'cell-index' property can be used to enumerate - logical devices within an IP core. For example, the following is the - system.mhs entry for the dual ps2 controller found on the ml403 reference - design. + Some IP cores actually implement 2 or more logical devices. In + this case, the device should still describe the whole IP core with + a single node and add a child node for each logical device. The + ranges property can be used to translate from parent IP-core to the + registers of each device. In addition, the parent node should be + compatible with the bus type 'xlnx,compound', and should contain + #address-cells and #size-cells, as with any other bus. (Note: this + makes the assumption that both logical devices have the same bus + binding. If this is not true, then separate nodes should be used + for each logical device). The 'cell-index' property can be used to + enumerate logical devices within an IP core. For example, the + following is the system.mhs entry for the dual ps2 controller found + on the ml403 reference design. BEGIN opb_ps2_dual_ref PARAMETER INSTANCE = opb_ps2_dual_ref_0 @@ -2386,21 +2392,24 @@ platforms are moved over to use the flattened-device-tree model. It would result in the following device tree nodes: - opb_ps2_dual_ref_0@a9000000 { + opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; ranges = <0 a9000000 2000>; // If this device had extra parameters, then they would // go here. ps2@0 { compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; reg = <0 40>; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <3 0>; cell-index = <0>; }; ps2@1000 { compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; reg = <1000 40>; - interrupt-parent = <&opb-intc>; + interrupt-parent = <&opb_intc_0>; interrupts = <3 0>; cell-index = <0>; }; @@ -2463,17 +2472,18 @@ platforms are moved over to use the flattened-device-tree model. Gives this device tree (some properties removed for clarity): - plb-v34-0 { + plb@0 { #address-cells = <1>; #size-cells = <1>; + compatible = "xlnx,plb-v34-1.02.a"; device_type = "ibm,plb"; ranges; // 1:1 translation - plb-bram-if-cntrl-0@ffff0000 { + plb_bram_if_cntrl_0: bram@ffff0000 { reg = ; } - opb-v20-0 { + opb@20000000 { #address-cells = <1>; #size-cells = <1>; ranges = <20000000 20000000 20000000 @@ -2481,11 +2491,11 @@ platforms are moved over to use the flattened-device-tree model. 80000000 80000000 40000000 c0000000 c0000000 20000000>; - opb-uart16550-0@a0000000 { + opb_uart16550_0: serial@a0000000 { reg = ; }; - opb-intc-0@d1000fc0 { + opb_intc_0: interrupt-controller@d1000fc0 { reg = ; }; }; -- cgit v1.2.3