From 56906c612e10b5e32a48ccbe8a3c08ab6acf5a28 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 May 2007 10:26:17 -0700 Subject: PCI: remove useless pci driver method Remove pointless and never-called enable_wake() hook from pci_driver and from documentation. Evidently this was introduced in the 2.4.6 kernel, but there's no evidence it was ever called; and it was rarely implemented. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/pci.txt | 3 --- Documentation/power/pci.txt | 37 ------------------------------------- 2 files changed, 40 deletions(-) (limited to 'Documentation') diff --git a/Documentation/pci.txt b/Documentation/pci.txt index d38261b67905..7d3da30ff0b4 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -113,9 +113,6 @@ initialization with a pointer to a structure describing the driver (Please see Documentation/power/pci.txt for descriptions of PCI Power Management and the related functions.) - enable_wake Enable device to generate wake events from a low power - state. - shutdown Hook into reboot_notifier_list (kernel/sys.c). Intended to stop any idling DMA operations. Useful for enabling wake-on-lan (NIC) or changing diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index e00b099a4b86..dd8fe43888d3 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -164,7 +164,6 @@ struct pci_driver: int (*suspend) (struct pci_dev *dev, pm_message_t state); int (*resume) (struct pci_dev *dev); - int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); suspend @@ -251,42 +250,6 @@ The driver should update the current_state field in its pci_dev structure in this function, except for PM-capable devices when pci_set_power_state is used. -enable_wake ------------ - -Usage: - -if (dev->driver && dev->driver->enable_wake) - dev->driver->enable_wake(dev,state,enable); - -This callback is generally only relevant for devices that support the PCI PM -spec and have the ability to generate a PME# (Power Management Event Signal) -to wake the system up. (However, it is possible that a device may support -some non-standard way of generating a wake event on sleep.) - -Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's -PM Capabilities describe what power states the device supports generating a -wake event from: - -+------------------+ -| Bit | State | -+------------------+ -| 11 | D0 | -| 12 | D1 | -| 13 | D2 | -| 14 | D3hot | -| 15 | D3cold | -+------------------+ - -A device can use this to enable wake events: - - pci_enable_wake(dev,state,enable); - -Note that to enable PME# from D3cold, a value of 4 should be passed to -pci_enable_wake (since it uses an index into a bitmask). If a driver gets -a request to enable wake events from D3, two calls should be made to -pci_enable_wake (one for both D3hot and D3cold). - A reference implementation ------------------------- -- cgit v1.2.3 From caa5171622c8fef70fa20d2d74f4326866039df9 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 9 Jul 2007 11:55:51 -0700 Subject: PCI: remove pci_dac_dma_... APIs Based on replies to a respective query, remove the pci_dac_dma_...() APIs (except for pci_dac_dma_supported() on Alpha, where this function is used in non-DAC PCI DMA code). Signed-off-by: Jan Beulich Cc: Andi Kleen Cc: Jesse Barnes Cc: Christoph Hellwig Acked-by: David Miller Cc: Jeff Garzik Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/DMA-mapping.txt | 103 ------------------------------------------ 1 file changed, 103 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index 028614cdd062..e07f2530326b 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -664,109 +664,6 @@ It is that simple. Well, not for some odd devices. See the next section for information about that. - DAC Addressing for Address Space Hungry Devices - -There exists a class of devices which do not mesh well with the PCI -DMA mapping API. By definition these "mappings" are a finite -resource. The number of total available mappings per bus is platform -specific, but there will always be a reasonable amount. - -What is "reasonable"? Reasonable means that networking and block I/O -devices need not worry about using too many mappings. - -As an example of a problematic device, consider compute cluster cards. -They can potentially need to access gigabytes of memory at once via -DMA. Dynamic mappings are unsuitable for this kind of access pattern. - -To this end we've provided a small API by which a device driver -may use DAC cycles to directly address all of physical memory. -Not all platforms support this, but most do. It is easy to determine -whether the platform will work properly at probe time. - -First, understand that there may be a SEVERE performance penalty for -using these interfaces on some platforms. Therefore, you MUST only -use these interfaces if it is absolutely required. %99 of devices can -use the normal APIs without any problems. - -Note that for streaming type mappings you must either use these -interfaces, or the dynamic mapping interfaces above. You may not mix -usage of both for the same device. Such an act is illegal and is -guaranteed to put a banana in your tailpipe. - -However, consistent mappings may in fact be used in conjunction with -these interfaces. Remember that, as defined, consistent mappings are -always going to be SAC addressable. - -The first thing your driver needs to do is query the PCI platform -layer if it is capable of handling your devices DAC addressing -capabilities: - - int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask); - -You may not use the following interfaces if this routine fails. - -Next, DMA addresses using this API are kept track of using the -dma64_addr_t type. It is guaranteed to be big enough to hold any -DAC address the platform layer will give to you from the following -routines. If you have consistent mappings as well, you still -use plain dma_addr_t to keep track of those. - -All mappings obtained here will be direct. The mappings are not -translated, and this is the purpose of this dialect of the DMA API. - -All routines work with page/offset pairs. This is the _ONLY_ way to -portably refer to any piece of memory. If you have a cpu pointer -(which may be validly DMA'd too) you may easily obtain the page -and offset using something like this: - - struct page *page = virt_to_page(ptr); - unsigned long offset = offset_in_page(ptr); - -Here are the interfaces: - - dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, - unsigned long offset, - int direction); - -The DAC address for the tuple PAGE/OFFSET are returned. The direction -argument is the same as for pci_{map,unmap}_single(). The same rules -for cpu/device access apply here as for the streaming mapping -interfaces. To reiterate: - - The cpu may touch the buffer before pci_dac_page_to_dma. - The device may touch the buffer after pci_dac_page_to_dma - is made, but the cpu may NOT. - -When the DMA transfer is complete, invoke: - - void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, - size_t len, int direction); - -This must be done before the CPU looks at the buffer again. -This interface behaves identically to pci_dma_sync_{single,sg}_for_cpu(). - -And likewise, if you wish to let the device get back at the buffer after -the cpu has read/written it, invoke: - - void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, - size_t len, int direction); - -before letting the device access the DMA area again. - -If you need to get back to the PAGE/OFFSET tuple from a dma64_addr_t -the following interfaces are provided: - - struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr); - unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr); - -This is possible with the DAC interfaces purely because they are -not translated in any way. - Optimizing Unmap State Space Consumption On many platforms, pci_unmap_{single,page}() is simply a nop. -- cgit v1.2.3 From 694625c0b322905d6892fad873029f764cd4823f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 9 Jul 2007 11:55:54 -0700 Subject: PCI: add pci_try_set_mwi As suggested by Andrew, add pci_try_set_mwi(), which does not require return-value checking. - add pci_try_set_mwi() without __must_check - make it return 0 on success, errno if the "try" failed or error - review callers Signed-off-by: Randy Dunlap Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/pci.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/pci.txt b/Documentation/pci.txt index 7d3da30ff0b4..7754f5aea4e9 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -296,7 +296,10 @@ If the PCI device can use the PCI Memory-Write-Invalidate transaction, call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval and also ensures that the cache line size register is set correctly. Check the return value of pci_set_mwi() as not all architectures -or chip-sets may support Memory-Write-Invalidate. +or chip-sets may support Memory-Write-Invalidate. Alternatively, +if Mem-Wr-Inval would be nice to have but is not required, call +pci_try_set_mwi() to have the system do its best effort at enabling +Mem-Wr-Inval. 3.2 Request MMIO/IOP resources -- cgit v1.2.3