From de1ba09b214056365d9082982905b255caafb7a2 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 8 Dec 2006 02:39:42 -0800 Subject: [PATCH] fault injection: documentation and scripts This patch set provides some fault-injection capabilities. - kmalloc() failures - alloc_pages() failures - disk IO errors We can see what really happens if those failures happen. In order to enable these fault-injection capabilities: 1. Enable relevant config options (CONFIG_FAILSLAB, CONFIG_PAGE_ALLOC, CONFIG_MAKE_REQUEST) and if you want to configure them via debugfs, enable CONFIG_FAULT_INJECTION_DEBUG_FS. 2. Build and boot with this kernel 3. Configure fault-injection capabilities behavior by boot option or debugfs - Boot option failslab= fail_page_alloc= fail_make_request= - Debugfs /debug/failslab/* /debug/fail_page_alloc/* /debug/fail_make_request/* Please refer to the Documentation/fault-injection/fault-injection.txt for details. 4. See what really happens. Signed-off-by: Akinobu Mita Signed-off-by: Don Mullis Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fault-injection/failcmd.sh | 4 + Documentation/fault-injection/failmodule.sh | 31 +++ Documentation/fault-injection/fault-injection.txt | 223 ++++++++++++++++++++++ Documentation/kernel-parameters.txt | 7 + 4 files changed, 265 insertions(+) create mode 100644 Documentation/fault-injection/failcmd.sh create mode 100644 Documentation/fault-injection/failmodule.sh create mode 100644 Documentation/fault-injection/fault-injection.txt (limited to 'Documentation') diff --git a/Documentation/fault-injection/failcmd.sh b/Documentation/fault-injection/failcmd.sh new file mode 100644 index 000000000000..63177aba8106 --- /dev/null +++ b/Documentation/fault-injection/failcmd.sh @@ -0,0 +1,4 @@ +#!/bin/bash + +echo 1 > /proc/self/make-it-fail +exec $* diff --git a/Documentation/fault-injection/failmodule.sh b/Documentation/fault-injection/failmodule.sh new file mode 100644 index 000000000000..9abac34633b9 --- /dev/null +++ b/Documentation/fault-injection/failmodule.sh @@ -0,0 +1,31 @@ +#!/bin/bash +# +# Usage: failmodule [stacktrace-depth] +# +# : "failslab", "fail_alloc_page", or "fail_make_request" +# +# : module name that you want to inject faults. +# +# [stacktrace-depth]: the maximum number of stacktrace walking allowed +# + +STACKTRACE_DEPTH=5 +if [ $# -gt 2 ]; then + STACKTRACE_DEPTH=$3 +fi + +if [ ! -d /debug/$1 ]; then + echo "Fault-injection $1 does not exist" >&2 + exit 1 +fi +if [ ! -d /sys/module/$2 ]; then + echo "Module $2 does not exist" >&2 + exit 1 +fi + +# Disable any fault injection +echo 0 > /debug/$1/stacktrace-depth + +echo `cat /sys/module/$2/sections/.text` > /debug/$1/address-start +echo `cat /sys/module/$2/sections/.exit.text` > /debug/$1/address-end +echo $STACKTRACE_DEPTH > /debug/$1/stacktrace-depth diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt new file mode 100644 index 000000000000..260ce6c199ce --- /dev/null +++ b/Documentation/fault-injection/fault-injection.txt @@ -0,0 +1,223 @@ +Fault injection capabilities infrastructure +=========================================== + +See also drivers/md/faulty.c and "every_nth" module option for scsi_debug. + + +Available fault injection capabilities +-------------------------------------- + +o failslab + + injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...) + +o fail_page_alloc + + injects page allocation failures. (alloc_pages(), get_free_pages(), ...) + +o fail_make_request + + injects disk IO errors on permitted devices by + /sys/block//make-it-fail or + /sys/block///make-it-fail. (generic_make_request()) + +Configure fault-injection capabilities behavior +----------------------------------------------- + +o debugfs entries + +fault-inject-debugfs kernel module provides some debugfs entries for runtime +configuration of fault-injection capabilities. + +- /debug/*/probability: + + likelihood of failure injection, in percent. + Format: + + Note that one-failure-per-handred is a very high error rate + for some testcases. Please set probably=100 and configure + /debug/*/interval for such testcases. + +- /debug/*/interval: + + specifies the interval between failures, for calls to + should_fail() that pass all the other tests. + + Note that if you enable this, by setting interval>1, you will + probably want to set probability=100. + +- /debug/*/times: + + specifies how many times failures may happen at most. + A value of -1 means "no limit". + +- /debug/*/space: + + specifies an initial resource "budget", decremented by "size" + on each call to should_fail(,size). Failure injection is + suppressed until "space" reaches zero. + +- /debug/*/verbose + + Format: { 0 | 1 | 2 } + specifies the verbosity of the messages when failure is injected. + We default to 0 (no extra messages), setting it to '1' will + print only to tell failure happened, '2' will print call trace too - + it is useful to debug the problems revealed by fault injection + capabilities. + +- /debug/*/task-filter: + + Format: { 0 | 1 } + A value of '0' disables filtering by process (default). + Any positive value limits failures to only processes indicated by + /proc//make-it-fail==1. + +- /debug/*/address-start: +- /debug/*/address-end: + + specifies the range of virtual addresses tested during + stacktrace walking. Failure is injected only if some caller + in the walked stacktrace lies within this range. + Default is [0,ULONG_MAX) (whole of virtual address space). + +- /debug/*/stacktrace-depth: + + specifies the maximum stacktrace depth walked during search + for a caller within [address-start,address-end). + +- /debug/failslab/ignore-gfp-highmem: +- /debug/fail_page_alloc/ignore-gfp-highmem: + + Format: { 0 | 1 } + default is 0, setting it to '1' won't inject failures into + highmem/user allocations. + +- /debug/failslab/ignore-gfp-wait: +- /debug/fail_page_alloc/ignore-gfp-wait: + + Format: { 0 | 1 } + default is 0, setting it to '1' will inject failures + only into non-sleep allocations (GFP_ATOMIC allocations). + +o Boot option + +In order to inject faults while debugfs is not available (early boot time), +use the boot option: + + failslab= + fail_page_alloc= + fail_make_request=,,, + +How to add new fault injection capability +----------------------------------------- + +o #include + +o define the fault attributes + + DECLARE_FAULT_INJECTION(name); + + Please see the definition of struct fault_attr in fault-inject.h + for details. + +o provide the way to configure fault attributes + +- boot option + + If you need to enable the fault injection capability from boot time, you can + provide boot option to configure it. There is a helper function for it. + + setup_fault_attr(attr, str); + +- debugfs entries + + failslab, fail_page_alloc, and fail_make_request use this way. + There is a helper function for it. + + init_fault_attr_entries(entries, attr, name); + void cleanup_fault_attr_entries(entries); + +- module parameters + + If the scope of the fault injection capability is limited to a + single kernel module, it is better to provide module parameters to + configure the fault attributes. + +o add a hook to insert failures + + should_fail() returns 1 when failures should happen. + + should_fail(attr,size); + +Application Examples +-------------------- + +o inject slab allocation failures into module init/cleanup code + +------------------------------------------------------------------------------ +#!/bin/bash + +FAILCMD=Documentation/fault-injection/failcmd.sh +BLACKLIST="root_plug evbug" + +FAILNAME=failslab +echo Y > /debug/$FAILNAME/task-filter +echo 10 > /debug/$FAILNAME/probability +echo 100 > /debug/$FAILNAME/interval +echo -1 > /debug/$FAILNAME/times +echo 2 > /debug/$FAILNAME/verbose +echo 1 > /debug/$FAILNAME/ignore-gfp-highmem +echo 1 > /debug/$FAILNAME/ignore-gfp-wait + +blacklist() +{ + echo $BLACKLIST | grep $1 > /dev/null 2>&1 +} + +oops() +{ + dmesg | grep BUG > /dev/null 2>&1 +} + +find /lib/modules/`uname -r` -name '*.ko' -exec basename {} .ko \; | + while read i + do + oops && exit 1 + + if ! blacklist $i + then + echo inserting $i... + bash $FAILCMD modprobe $i + fi + done + +lsmod | awk '{ if ($3 == 0) { print $1 } }' | + while read i + do + oops && exit 1 + + if ! blacklist $i + then + echo removing $i... + bash $FAILCMD modprobe -r $i + fi + done + +------------------------------------------------------------------------------ + +o inject slab allocation failures only for a specific module + +------------------------------------------------------------------------------ +#!/bin/bash + +FAILMOD=Documentation/fault-injection/failmodule.sh + +echo injecting errors into the module $1... + +modprobe $1 +bash $FAILMOD failslab $1 10 +echo 25 > /debug/failslab/probability + +------------------------------------------------------------------------------ + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b79bcdf16319..d8323b8893c3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -548,6 +548,13 @@ and is between 256 and 4096 characters. It is defined in the file eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog. Format: [,] + failslab= + fail_page_alloc= + fail_make_request=[KNL] + General fault injection mechanism. + Format: ,,, + See also /Documentation/fault-injection/. + fd_mcs= [HW,SCSI] See header of drivers/scsi/fd_mcs.c. -- cgit v1.2.3