From 618a864ee7b720aa3560796e0dfad0e674366e60 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Sat, 5 Jun 2010 07:45:04 -0300 Subject: V4L/DVB: gspca - sq930x: New subdriver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index f13eb036c439..a258107f8126 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -29,8 +29,12 @@ zc3xx 041e:4029 Creative WebCam Vista Pro zc3xx 041e:4034 Creative Instant P0620 zc3xx 041e:4035 Creative Instant P0620D zc3xx 041e:4036 Creative Live ! +sq930x 041e:4038 Creative Joy-IT zc3xx 041e:403a Creative Nx Pro 2 spca561 041e:403b Creative Webcam Vista (VF0010) +sq930x 041e:403c Creative Live! Ultra +sq930x 041e:403d Creative Live! Ultra for Notebooks +sq930x 041e:4041 Creative Live! Motion zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250) ov519 041e:4052 Creative Live! VISTA IM zc3xx 041e:4053 Creative Live!Cam Video IM @@ -362,6 +366,8 @@ sq905c 2770:9052 Disney pix micro 2 (VGA) sq905c 2770:905c All 11 known cameras with this ID sq905 2770:9120 All 24 known cameras with this ID sq905c 2770:913d All 4 known cameras with this ID +sq930x 2770:930b Sweex Motion Tracking / I-Tec iCam Tracer +sq930x 2770:930c Trust WB-3500T / NSG Robbie 2.0 spca500 2899:012c Toptro Industrial ov519 8020:ef04 ov519 spca508 8086:0110 Intel Easy PC Camera -- cgit v1.2.3 From 5b0ff8c43afefbd42a1aa3cd89808eec829bbbb7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Sat, 5 Jun 2010 07:57:56 -0300 Subject: V4L/DVB: gspca - spca1528: New subdriver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index a258107f8126..58adb71c6294 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -142,6 +142,7 @@ finepix 04cb:013d Fujifilm FinePix unknown model finepix 04cb:013f Fujifilm FinePix F420 sunplus 04f1:1001 JVC GC A50 spca561 04fc:0561 Flexcam 100 +spca1528 04fc:1528 Sunplus MD80 clone sunplus 04fc:500c Sunplus CA500C sunplus 04fc:504a Aiptek Mini PenCam 1.3 sunplus 04fc:504b Maxell MaxPocket LE 1.3 -- cgit v1.2.3 From 4e6aeefeb822c70d70de4d3b9970939e5de9c647 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Mon, 14 Jun 2010 17:21:37 -0300 Subject: V4L/DVB: gspca - pac7302: add Genius iSlim 310 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add Genius iSlim 310 webcam to the supported list of the PAC7302 driver. For more information see http://linuxtv.org/wiki/index.php/PixArt_PAC7301/PAC7302 . Signed-off-by: Márton Németh Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 58adb71c6294..56ba7bba7168 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -258,6 +258,7 @@ pac7302 093a:2620 Apollo AC-905 pac7302 093a:2621 PAC731x pac7302 093a:2622 Genius Eye 312 pac7302 093a:2624 PAC7302 +pac7302 093a:2625 Genius iSlim 310 pac7302 093a:2626 Labtec 2200 pac7302 093a:2628 Genius iLook 300 pac7302 093a:2629 Genious iSlim 300 -- cgit v1.2.3 From 8d3557e21d0b305392ac73a64411dfab0e794960 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 3 Jul 2010 17:39:17 -0300 Subject: V4L/DVB: DocBook/dvb: Update spec to reflect the current FE capabilities Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/dvbapi.xml | 19 ++++++++++++++++--- Documentation/DocBook/dvb/frontend.h.xml | 1 + Documentation/DocBook/dvb/frontend.xml | 10 ++++++++-- Documentation/DocBook/media.tmpl | 4 ++-- 4 files changed, 27 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml index 63c528fee624..e3a97fdd62a6 100644 --- a/Documentation/DocBook/dvb/dvbapi.xml +++ b/Documentation/DocBook/dvb/dvbapi.xml @@ -12,10 +12,12 @@ O. C.
rjkm@metzlerbros.de
 + + Mauro -Chehab Carvalho +Chehab
mchehab@redhat.com
 Ported document to Docbook XML. @@ -23,12 +25,23 @@ 2002 2003 - 2009 Convergence GmbH + + 2009-2010 + Mauro Carvalho Chehab + + + 2.0.3 + 2010-07-03 + mcc + + Add some frontend capabilities flags, present on kernel, but missing at the specs. + + 2.0.2 2009-10-25 @@ -63,7 +76,7 @@ Added ISDB-T test originally written by Patrick Boettcher LINUX DVB API -Version 3 +Version 5.2 &sub-intro; diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml index b99644f5340a..d08e0d401418 100644 --- a/Documentation/DocBook/dvb/frontend.h.xml +++ b/Documentation/DocBook/dvb/frontend.h.xml @@ -63,6 +63,7 @@ typedef enum fe_caps { FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ + FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml index 300ba1f04177..78d756de5906 100644 --- a/Documentation/DocBook/dvb/frontend.xml +++ b/Documentation/DocBook/dvb/frontend.xml @@ -64,8 +64,14 @@ a specific frontend type. FE_CAN_BANDWIDTH_AUTO = 0x40000, FE_CAN_GUARD_INTERVAL_AUTO = 0x80000, FE_CAN_HIERARCHY_AUTO = 0x100000, - FE_CAN_MUTE_TS = 0x80000000, - FE_CAN_CLEAN_SETUP = 0x40000000 + FE_CAN_8VSB = 0x200000, + FE_CAN_16VSB = 0x400000, + FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_TURBO_FEC = 0x8000000, + FE_CAN_2G_MODULATION = 0x10000000, + FE_NEEDS_BENDING = 0x20000000, + FE_CAN_RECOVER = 0x40000000, + FE_CAN_MUTE_TS = 0x80000000 } fe_caps_t; diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl index eea564bb12cb..fe10bd7721f2 100644 --- a/Documentation/DocBook/media.tmpl +++ b/Documentation/DocBook/media.tmpl @@ -28,7 +28,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009 + 2009-2010 LinuxTV Developers @@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled - 2009 + 2009-2010 Mauro Carvalho Chehab -- cgit v1.2.3 From f0cae143e113d28ab89a930934c36f619c4367f0 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sat, 3 Jul 2010 01:10:09 -0300 Subject: V4L/DVB: IR/lirc: add docbook info covering lirc device interface First ever crack at creating docbook documentation... Contains a bevy of information on the various lirc device interface ioctls, as well as a bit about the read and write interfaces. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/v4l/lirc_device_interface.xml | 235 +++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 Documentation/DocBook/v4l/lirc_device_interface.xml (limited to 'Documentation') diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml new file mode 100644 index 000000000000..d9ae6803c2fc --- /dev/null +++ b/Documentation/DocBook/v4l/lirc_device_interface.xml @@ -0,0 +1,235 @@ +LIRC Device Interface + + +
+Introduction + +The LIRC device interface is a bi-directional interface for +transporting raw IR data between userspace and kernelspace. Fundamentally, +it is just a chardev (/dev/lircX, for X = 0, 1, 2, ...), with a number +of standard struct file_operations defined on it. With respect to +transporting raw IR data to and fro, the essential fops are read, write +and ioctl. + +Example dmesg output upon a driver registering w/LIRC: +
+ $ dmesg |grep lirc_dev + lirc_dev: IR Remote Control driver registered, major 248 + rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 +
+ + +What you should see for a chardev: +
+ $ ls -l /dev/lirc* + crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0 +
+ + + +
+LIRC read fop + +The lircd userspace daemon reads raw IR data from the LIRC chardev. The +exact format of the data depends on what modes a driver supports, and what +mode has been selected. lircd obtains supported modes and sets the active mode +via the ioctl interface, detailed at . The generally +preferred mode is LIRC_MODE_MODE2, in which packets containing an int value +describing an IR signal are read from the chardev. + +See also http://www.lirc.org/html/technical.html for more info. + + +
+LIRC write fop + +The data written to the chardev is a pulse/space sequence of integer +values. Pulses and spaces are only marked implicitly by their position. The +data must start and end with a pulse, therefore, the data must always include +an unevent number of samples. The write function must block until the data has +been transmitted by the hardware. + + +
+ LIRC ioctl fop + +The LIRC device's ioctl definition is bound by the ioctl function +definition of struct file_operations, leaving us with an unsigned int +for the ioctl command and an unsigned long for the arg. For the purposes +of ioctl portability across 32-bit and 64-bit, these values are capped +to their 32-bit sizes. + +The following ioctls can be used to change specific hardware settings. +In general each driver should have a default set of settings. The driver +implementation is expected to re-apply the default settings when the device +is closed by user-space, so that every application opening the device can rely +on working with the default settings initially. + + + + LIRC_GET_FEATURES + + Obviously, get the underlying hardware device's features. If a driver + does not announce support of certain features, calling of the corresponding + ioctls is undefined. + + + + LIRC_GET_SEND_MODE + + Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd. + + + + LIRC_GET_REC_MODE + + Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE + are supported by lircd. + + + + LIRC_GET_SEND_CARRIER + + Get carrier frequency (in Hz) currently used for transmit. + + + + LIRC_GET_REC_CARRIER + + Get carrier frequency (in Hz) currently used for IR reception. + + + + LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE + + Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently, + no special meaning is defined for 0 or 100, but this could be used to switch + off carrier generation in the future, so these values should be reserved. + + + + LIRC_GET_REC_RESOLUTION + + Some receiver have maximum resolution which is defined by internal + sample rate or data format limitations. E.g. it's common that signals can + only be reported in 50 microsecond steps. This integer value is used by + lircd to automatically adjust the aeps tolerance value in the lircd + config file. + + + + LIRC_GET_M{IN,AX}_TIMEOUT + + Some devices have internal timers that can be used to detect when + there's no IR activity for a long time. This can help lircd in detecting + that a IR signal is finished and can speed up the decoding process. + Returns an integer value with the minimum/maximum timeout that can be + set. Some devices have a fixed timeout, in that case both ioctls will + return the same value even though the timeout cannot be changed. + + + + LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE} + + Some devices are able to filter out spikes in the incoming signal + using given filter rules. These ioctls return the hardware capabilities + that describe the bounds of the possible filters. Filter settings depend + on the IR protocols that are expected. lircd derives the settings from + all protocols definitions found in its config file. + + + + LIRC_GET_LENGTH + + Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE). + Reads on the device must be done in blocks matching the bit count. + The bit could should be rounded up so that it matches full bytes. + + + + LIRC_SET_{SEND,REC}_MODE + + Set send/receive mode. Largely obsolete for send, as only + LIRC_MODE_PULSE is supported. + + + + LIRC_SET_{SEND,REC}_CARRIER + + Set send/receive carrier (in Hz). + + + + LIRC_SET_TRANSMITTER_MASK + + This enables the given set of transmitters. The first transmitter + is encoded by the least significant bit, etc. When an invalid bit mask + is given, i.e. a bit is set, even though the device does not have so many + transitters, then this ioctl returns the number of available transitters + and does nothing otherwise. + + + + LIRC_SET_REC_TIMEOUT + + Sets the integer value for IR inactivity timeout (cf. + LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if + supported by the hardware) disables all hardware timeouts and data should + be reported as soon as possible. If the exact value cannot be set, then + the next possible value _greater_ than the given value should be set. + + + + LIRC_SET_REC_TIMEOUT_REPORTS + + Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By + default, timeout reports should be turned off. + + + + LIRC_SET_REC_FILTER_{,PULSE,SPACE} + + Pulses/spaces shorter than this are filtered out by hardware. If + filters cannot be set independently for pulse/space, the corresponding + ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead. + + + + LIRC_SET_MEASURE_CARRIER_MODE + + Enable (1)/disable (0) measure mode. If enabled, from the next key + press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default + this should be turned off. + + + + LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE + + To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE + with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER + with the upper bound. + + + + LIRC_NOTIFY_DECODE + + This ioctl is called by lircd whenever a successful decoding of an + incoming IR signal could be done. This can be used by supporting hardware + to give visual feedback to the user e.g. by flashing a LED. + + + + LIRC_SETUP_{START,END} + + Setting of several driver parameters can be optimized by encapsulating + the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a + driver receives a LIRC_SETUP_START ioctl it can choose to not commit + further setting changes to the hardware until a LIRC_SETUP_END is received. + But this is open to the driver implementation and every driver must also + handle parameter changes which are not encapsulated by LIRC_SETUP_START + and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls. + + + + +
-- cgit v1.2.3 From fab8125919c0fc724e11b184b1c812dfb8990549 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 4 Jul 2010 12:23:19 -0300 Subject: V4L/DVB: DocBook/media: Add LIRC DocBook to media.html Add LIRC interface into the media.html DocBook, fixing several small XML errors at the original spec. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 1 + Documentation/DocBook/media.tmpl | 4 +- .../DocBook/v4l/lirc_device_interface.xml | 88 +++++++++++----------- Documentation/DocBook/v4l/remote_controllers.xml | 2 + 4 files changed, 49 insertions(+), 46 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 5d4d40f429a5..6ae97157b1c7 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -218,6 +218,7 @@ + diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl index fe10bd7721f2..f11048d4053f 100644 --- a/Documentation/DocBook/media.tmpl +++ b/Documentation/DocBook/media.tmpl @@ -61,7 +61,7 @@ Foundation. A copy of the license is included in the chapter entitled in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers other API's used by all media infrastructure devices + The third part covers Remote Controller API For additional information and for the latest development code, see: http://linuxtv.org. For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. @@ -101,7 +101,7 @@ Foundation. A copy of the license is included in the chapter entitled -Other API's used by media infrastructure drivers +Remote Controller API &sub-remote_controllers; diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml index d9ae6803c2fc..0413234023d4 100644 --- a/Documentation/DocBook/v4l/lirc_device_interface.xml +++ b/Documentation/DocBook/v4l/lirc_device_interface.xml @@ -1,3 +1,4 @@ +
LIRC Device Interface @@ -17,15 +18,13 @@ and ioctl. lirc_dev: IR Remote Control driver registered, major 248 rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 - What you should see for a chardev:
$ ls -l /dev/lirc* crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0
- - +
LIRC read fop @@ -33,12 +32,12 @@ and ioctl. The lircd userspace daemon reads raw IR data from the LIRC chardev. The exact format of the data depends on what modes a driver supports, and what mode has been selected. lircd obtains supported modes and sets the active mode -via the ioctl interface, detailed at . The generally +via the ioctl interface, detailed at . The generally preferred mode is LIRC_MODE_MODE2, in which packets containing an int value describing an IR signal are read from the chardev. -See also http://www.lirc.org/html/technical.html for more info. - +See also http://www.lirc.org/html/technical.html for more info. +
LIRC write fop @@ -48,10 +47,10 @@ values. Pulses and spaces are only marked implicitly by their position. The data must start and end with a pulse, therefore, the data must always include an unevent number of samples. The write function must block until the data has been transmitted by the hardware. - +
- LIRC ioctl fop +LIRC ioctl fop The LIRC device's ioctl definition is bound by the ioctl function definition of struct file_operations, leaving us with an unsigned int @@ -69,167 +68,168 @@ on working with the default settings initially. LIRC_GET_FEATURES - Obviously, get the underlying hardware device's features. If a driver + Obviously, get the underlying hardware device's features. If a driver does not announce support of certain features, calling of the corresponding - ioctls is undefined. + ioctls is undefined. LIRC_GET_SEND_MODE - Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd. + Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd. LIRC_GET_REC_MODE - Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE - are supported by lircd. + Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE + are supported by lircd. LIRC_GET_SEND_CARRIER - Get carrier frequency (in Hz) currently used for transmit. + Get carrier frequency (in Hz) currently used for transmit. LIRC_GET_REC_CARRIER - Get carrier frequency (in Hz) currently used for IR reception. + Get carrier frequency (in Hz) currently used for IR reception. LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE - Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently, + Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently, no special meaning is defined for 0 or 100, but this could be used to switch - off carrier generation in the future, so these values should be reserved. + off carrier generation in the future, so these values should be reserved. LIRC_GET_REC_RESOLUTION - Some receiver have maximum resolution which is defined by internal + Some receiver have maximum resolution which is defined by internal sample rate or data format limitations. E.g. it's common that signals can only be reported in 50 microsecond steps. This integer value is used by lircd to automatically adjust the aeps tolerance value in the lircd - config file. + config file. LIRC_GET_M{IN,AX}_TIMEOUT - Some devices have internal timers that can be used to detect when + Some devices have internal timers that can be used to detect when there's no IR activity for a long time. This can help lircd in detecting that a IR signal is finished and can speed up the decoding process. Returns an integer value with the minimum/maximum timeout that can be set. Some devices have a fixed timeout, in that case both ioctls will - return the same value even though the timeout cannot be changed. + return the same value even though the timeout cannot be changed. LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE} - Some devices are able to filter out spikes in the incoming signal + Some devices are able to filter out spikes in the incoming signal using given filter rules. These ioctls return the hardware capabilities that describe the bounds of the possible filters. Filter settings depend on the IR protocols that are expected. lircd derives the settings from - all protocols definitions found in its config file. + all protocols definitions found in its config file. LIRC_GET_LENGTH - Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE). + Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE). Reads on the device must be done in blocks matching the bit count. - The bit could should be rounded up so that it matches full bytes. + The bit could should be rounded up so that it matches full bytes. LIRC_SET_{SEND,REC}_MODE - Set send/receive mode. Largely obsolete for send, as only - LIRC_MODE_PULSE is supported. + Set send/receive mode. Largely obsolete for send, as only + LIRC_MODE_PULSE is supported. LIRC_SET_{SEND,REC}_CARRIER - Set send/receive carrier (in Hz). + Set send/receive carrier (in Hz). LIRC_SET_TRANSMITTER_MASK - This enables the given set of transmitters. The first transmitter + This enables the given set of transmitters. The first transmitter is encoded by the least significant bit, etc. When an invalid bit mask is given, i.e. a bit is set, even though the device does not have so many transitters, then this ioctl returns the number of available transitters - and does nothing otherwise. + and does nothing otherwise. LIRC_SET_REC_TIMEOUT - Sets the integer value for IR inactivity timeout (cf. + Sets the integer value for IR inactivity timeout (cf. LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if supported by the hardware) disables all hardware timeouts and data should be reported as soon as possible. If the exact value cannot be set, then - the next possible value _greater_ than the given value should be set. + the next possible value _greater_ than the given value should be set. LIRC_SET_REC_TIMEOUT_REPORTS - Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By - default, timeout reports should be turned off. + Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By + default, timeout reports should be turned off. LIRC_SET_REC_FILTER_{,PULSE,SPACE} - Pulses/spaces shorter than this are filtered out by hardware. If + Pulses/spaces shorter than this are filtered out by hardware. If filters cannot be set independently for pulse/space, the corresponding - ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead. + ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead. LIRC_SET_MEASURE_CARRIER_MODE - Enable (1)/disable (0) measure mode. If enabled, from the next key + Enable (1)/disable (0) measure mode. If enabled, from the next key press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default - this should be turned off. + this should be turned off. LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE - To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE + To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER - with the upper bound. + with the upper bound. LIRC_NOTIFY_DECODE - This ioctl is called by lircd whenever a successful decoding of an + This ioctl is called by lircd whenever a successful decoding of an incoming IR signal could be done. This can be used by supporting hardware - to give visual feedback to the user e.g. by flashing a LED. + to give visual feedback to the user e.g. by flashing a LED. LIRC_SETUP_{START,END} - Setting of several driver parameters can be optimized by encapsulating + Setting of several driver parameters can be optimized by encapsulating the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a driver receives a LIRC_SETUP_START ioctl it can choose to not commit further setting changes to the hardware until a LIRC_SETUP_END is received. But this is open to the driver implementation and every driver must also handle parameter changes which are not encapsulated by LIRC_SETUP_START - and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls. + and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.
+
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index 73f5eab091f4..3c3b667b28e7 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -173,3 +173,5 @@ keymapping. This program demonstrates how to replace the keymap tables. &sub-keytable-c;
+ +&sub-lirc_device_interface; -- cgit v1.2.3 From 566789f6b0b6d4c6ec1618412184f05c7aa85f4d Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 May 2010 06:26:32 -0300 Subject: V4L/DVB: Remove usbvideo quickcam_messenger driver obsolete v4l1 driver replaced by gspca_stv06xx Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 8 -------- 1 file changed, 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1571c0c83dba..1ec3eb32ab87 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,14 +459,6 @@ Who: Corentin Chary ---------------------------- -What: usbvideo quickcam_messenger driver -When: 2.6.35 -Files: drivers/media/video/usbvideo/quickcam_messenger.[ch] -Why: obsolete v4l1 driver replaced by gspca_stv06xx -Who: Hans de Goede - ----------------------------- - What: ov511 v4l1 driver When: 2.6.35 Files: drivers/media/video/ov511.[ch] -- cgit v1.2.3 From 7373ab3669aec93f8c8f1ace7845c41d54ed6e3e Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 May 2010 06:31:39 -0300 Subject: V4L/DVB: Remove obsolete ov511 driver obsolete v4l1 driver replaced by gspca_ov519 Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 8 -------- 1 file changed, 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1ec3eb32ab87..79ef731d8a14 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,14 +459,6 @@ Who: Corentin Chary ---------------------------- -What: ov511 v4l1 driver -When: 2.6.35 -Files: drivers/media/video/ov511.[ch] -Why: obsolete v4l1 driver replaced by gspca_ov519 -Who: Hans de Goede - ----------------------------- - What: w9968cf v4l1 driver When: 2.6.35 Files: drivers/media/video/w9968cf*.[ch] -- cgit v1.2.3 From 51c555690d16d1d1354ee9b5a3c9098766702094 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 May 2010 06:41:07 -0300 Subject: V4L/DVB: Remove obsolete w9968cf v4l1 driver >From a97df96226e89d3539be93ddb5a8df3a2f7edcb6 Mon Sep 17 00:00:00 2001 obsolete v4l1 driver replaced by gspca_ov519 Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 8 -------- 1 file changed, 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 79ef731d8a14..d4c98943547c 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,14 +459,6 @@ Who: Corentin Chary ---------------------------- -What: w9968cf v4l1 driver -When: 2.6.35 -Files: drivers/media/video/w9968cf*.[ch] -Why: obsolete v4l1 driver replaced by gspca_ov519 -Who: Hans de Goede - ----------------------------- - What: ovcamchip sensor framework When: 2.6.35 Files: drivers/media/video/ovcamchip/* -- cgit v1.2.3 From 3b23bc5731d476b0913c437626d6a6f51687d1d6 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 May 2010 06:45:38 -0300 Subject: V4L/DVB: Remove obsolete ovcamchip sensor framework Only used by obsoleted v4l1 driver Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 8 -------- 1 file changed, 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d4c98943547c..af1d0710bfb3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,14 +459,6 @@ Who: Corentin Chary ---------------------------- -What: ovcamchip sensor framework -When: 2.6.35 -Files: drivers/media/video/ovcamchip/* -Why: Only used by obsoleted v4l1 drivers -Who: Hans de Goede - ----------------------------- - What: stv680 v4l1 driver When: 2.6.35 Files: drivers/media/video/stv680.[ch] -- cgit v1.2.3 From a96076096bca746ddad3a5d8bfd3bbb1d9b96444 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 May 2010 06:49:57 -0300 Subject: V4L/DVB: Remove obsolete stv680 v4l1 driver obsolete v4l1 driver replaced by gspca_stv0680 Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 8 -------- 1 file changed, 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index af1d0710bfb3..61a54fddbd49 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,14 +459,6 @@ Who: Corentin Chary ---------------------------- -What: stv680 v4l1 driver -When: 2.6.35 -Files: drivers/media/video/stv680.[ch] -Why: obsolete v4l1 driver replaced by gspca_stv0680 -Who: Hans de Goede - ----------------------------- - What: zc0301 v4l driver When: 2.6.35 Files: drivers/media/video/zc0301/* -- cgit v1.2.3 From 0d58cef664e01fb1848833455bfdbe1a3d91044c Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Mon, 31 May 2010 03:16:17 -0300 Subject: V4L/DVB: Remove obsolete zc0301 v4l driver On 05/29/10 01:30, Jean-Francois Moine wrote: > On Fri, 28 May 2010 13:03:28 -0400 > Amerigo Wang wrote: > >> Subject: [PATCH 6/6] Remove obsolete zc0301 v4l driver >> >> Duplicate functionality with the gspca_zc3xx driver, zc0301 only >> supports 2 USB-ID's (because it only supports a limited set of >> sensors) wich are also supported by the gspca_zc3xx driver >> (which supports 53 USB-ID's in total). > > You forgot to remove the conditionnal compilation in the gspca_zc3xx > driver (USB_DEVICE(0x046d, 0x08ae) in gspca/zc3xx.c) > Right, thanks for pointing this out! Attached is the updated patch, please use this one instead. Thanks! Duplicate functionality with the gspca_zc3xx driver, zc0301 only supports 2 USB-ID's (because it only supports a limited set of sensors) wich are also supported by the gspca_zc3xx driver (which supports 53 USB-ID's in total). Signed-off-by: Amerigo Wang Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 61a54fddbd49..79cb554761af 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -459,17 +459,6 @@ Who: Corentin Chary ---------------------------- -What: zc0301 v4l driver -When: 2.6.35 -Files: drivers/media/video/zc0301/* -Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only - supports 2 USB-ID's (because it only supports a limited set of - sensors) wich are also supported by the gspca_zc3xx driver - (which supports 53 USB-ID's in total) -Who: Hans de Goede - ----------------------------- - What: sysfs-class-rfkill state file When: Feb 2014 Files: net/rfkill/core.c -- cgit v1.2.3 From 128fe95d77d6c5239ce6af6c3edacafc79eb0a39 Mon Sep 17 00:00:00 2001 From: Vadim Catana Date: Sat, 29 May 2010 12:49:16 -0300 Subject: V4L/DVB: TechnoTrend TT-budget T-3000 This patch adds support for TechnoTrend TT-budget T-3000 DVB-T card. Signed-off-by: Vadim Catana Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 1387a69ae3aa..4000c29fcfb6 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -178,4 +178,5 @@ 177 -> Hawell HW-404M7 178 -> Beholder BeholdTV H7 [5ace:7190] 179 -> Beholder BeholdTV A7 [5ace:7090] -180 -> Avermedia M733A [1461:4155,1461:4255] +180 -> Avermedia PCI M733A [1461:4155,1461:4255] +181 -> TechoTrend TT-budget T-3000 [13c2:2804] -- cgit v1.2.3 From 7d7b5284d710f42f4c0c0d376d9a6af544c39afd Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 30 Jun 2010 18:17:35 -0300 Subject: V4L/DVB: cx23885: add support for new model revisions of the HVR12xx board family Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 16ca030e1185..87c46347bd63 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -17,9 +17,9 @@ 16 -> DVBWorld DVB-S2 2005 [0001:2005] 17 -> NetUP Dual DVB-S2 CI [1b55:2a2c] 18 -> Hauppauge WinTV-HVR1270 [0070:2211] - 19 -> Hauppauge WinTV-HVR1275 [0070:2215] - 20 -> Hauppauge WinTV-HVR1255 [0070:2251] - 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295] + 19 -> Hauppauge WinTV-HVR1275 [0070:2215,0070:221d,0070:22f2] + 20 -> Hauppauge WinTV-HVR1255 [0070:2251,0070:2259,0070:22f1] + 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5] 22 -> Mygica X8506 DMB-TH [14f1:8651] 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657] 24 -> Hauppauge WinTV-HVR1850 [0070:8541] -- cgit v1.2.3 From 89d328d5782cb7efebe733fb994aac4bc64c255a Mon Sep 17 00:00:00 2001 From: Renzo Dani Date: Tue, 6 Jul 2010 07:23:33 -0300 Subject: V4L/DVB: Retrieve firmware for az6027 Signed-off-by: Renzo Dani Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/get_dvb_firmware | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 239cbdbf4d12..9ea94dc3556e 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -26,7 +26,7 @@ use IO::Handle; "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", - "af9015", "ngene"); + "af9015", "ngene", "az6027"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -567,6 +567,23 @@ sub ngene { "$file1, $file2"; } +sub az6027{ + my $file = "AZ6027_Linux_Driver.tar.gz"; + my $url = "http://linux.terratec.de/files/$file"; + my $firmware = "dvb-usb-az6027-03.fw"; + + wgetfile($file, $url); + + #untar + if( system("tar xzvf $file $firmware")){ + die "failed to untar firmware"; + } + if( system("rm $file")){ + die ("unable to remove unnecessary files"); + } + + $firmware; +} # --------------------------------------------------------------- # Utilities -- cgit v1.2.3 From 4e9f5677755c8f2eda6a293139084010cbbf2044 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 14 May 2010 15:24:28 -0300 Subject: V4L/DVB: get_dvb_firmware: update af9015 New driver contains new firmware 5.1.0.0. Fix script to get that. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/get_dvb_firmware | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 9ea94dc3556e..350959f4e41b 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -518,11 +518,11 @@ sub bluebird { sub af9015 { my $sourcefile = "download.ashx?file=57"; my $url = "http://www.ite.com.tw/EN/Services/$sourcefile"; - my $hash = "ff5b096ed47c080870eacdab2de33ad6"; + my $hash = "e3f08935158038d385ad382442f4bb2d"; my $outfile = "dvb-usb-af9015.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); - my $fwoffset = 0x22708; - my $fwlength = 18225; + my $fwoffset = 0x25690; + my $fwlength = 18725; my ($chunklength, $buf, $rcount); checkstandard(); -- cgit v1.2.3 From 7e48b30af033076c85ab48a8306b5588faf5fb4b Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sun, 7 Mar 2010 17:55:43 -0300 Subject: V4L/DVB: dvb: add support for kworld 340u and ub435-q to em28xx-dvb This adds support for the KWorld PlusTV 340U and KWorld UB345-Q ATSC sticks, which are really the same device. The sticks have an eMPIA em2870 usb bridge chipset, an LG Electronics LGDT3304 ATSC/QAM demodulator and an NXP TDA18271HD tuner -- early versions of the 340U have a a TDA18271HD/C1, later models and the UB435-Q have a C2. The stick has been tested succesfully with both VSB_8 and QAM_256 signals. Its using lgdt3304 support added to the lgdt3305 driver by a prior patch, rather than the current lgdt3304 driver, as its severely lacking in functionality by comparison (see said patch for details). Signed-off-by: Jarod Wilson Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 3a623aaeae5f..5c568757c301 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -72,3 +72,4 @@ 73 -> Reddo DVB-C USB TV Box (em2870) 74 -> Actionmaster/LinXcel/Digitus VC211A (em2800) 75 -> Dikom DK300 (em2882) + 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] -- cgit v1.2.3