From c3f0f282d950a1e87496a2633ed9e924e275ff8c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 30 Jan 2013 15:32:26 +0100 Subject: ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodes Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used. Indeed the connexion between the DMA engine and the slave is not implemented yet in Device Tree. Note however that this property is also used for PDC (private DMA) on older SoCs. This is why the driver alone cannot determine the validity of this property. Reported-by: Douglas Gilbert Signed-off-by: Nicolas Ferre Cc: stable [3.8+] --- arch/arm/boot/dts/at91sam9x5.dtsi | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/arm/boot/dts/at91sam9x5.dtsi') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 0c6009080b88..d112c3af8ce2 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -402,8 +402,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; interrupts = <5 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -413,8 +411,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; interrupts = <6 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -424,8 +420,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; interrupts = <7 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; -- cgit v1.2.3