From 54397d85349f5b5c5f11f5eef431f9e86a338d16 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 26 Jul 2013 10:18:05 -0300 Subject: ARM: kirkwood: Relocate PCIe device tree nodes Now that mbus has been added to the device tree, it's possible to move the PCIe nodes out of the ocp node, placing it directly below the mbus. This is a more accurate representation of the hardware. Moving the PCIe nodes, we now need to introduce an extra cell to encode the window target ID and attribute. Since this depends on the PCIe port, we split the ranges translation entries, to correspond to each MBus window. In addition, we encode the PCIe memory and I/O apertures in the MBus node, according to the MBus DT binding specification. The choice made is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for I/O space. These apertures can be changed in each per-board DT file. Signed-off-by: Ezequiel Garcia Tested-by: Andrew Lunn Tested-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-db-88f6281.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts/kirkwood-db-88f6281.dts') diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index f420cbe856f7..72c4b0a0366f 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -18,7 +18,8 @@ model = "Marvell DB-88F6281-BP Development Board"; compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - ocp@f1000000 { + mbus { + ranges = ; pcie-controller { status = "okay"; -- cgit v1.2.3