From 817a5b967d5f2c78e9ab41ec91fc44f872201fc6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 14 Nov 2013 15:23:20 +0100 Subject: ARM: ux500: move MCDE pin config to device tree This moves the MCDE pin control table out of the board file and into the device tree. Some pins and configs have been marked as used by sub-devices or slaves to the MCDE, such as I2C device 0-070 which is the HDMI interface circuit AV8100, but the pins rather belong to the MCDE SOC block as they come out of the main ASIC. The touch screen GPIO is not related to MCDE so this gets deleted and need to be tied to the respective touch screen (I2C) device once that device is added instead. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 27 ++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/boot/dts/ste-href-family-pinctrl.dtsi') diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index ec990d8e1029..779829a1e143 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -604,6 +604,33 @@ }; }; }; + + mcde { + lcd_default_mode: lcd_default { + default_mux { + /* Mux in VSI0 and all the data lines */ + ste,function = "lcd"; + ste,pins = + "lcdvsi0_a_1", /* VSI0 for LCD */ + "lcd_d0_d7_a_1", /* Data lines */ + "lcd_d8_d11_a_1", /* TV-out */ + "lcdaclk_b_1", /* Clock line for TV-out */ + "lcdvsi1_a_1"; /* VSI1 for HDMI */ + }; + default_cfg1 { + ste,pins = + "GPIO68_E1", /* VSI0 */ + "GPIO69_E2"; /* VSI1 */ + ste,config = <&in_pu>; + }; + }; + lcd_sleep_mode: lcd_sleep { + sleep_cfg1 { + ste,pins = "GPIO69_E2"; /* VSI1 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; }; }; }; -- cgit v1.2.3