From 8ed0a9d4e7cfff439f95d08c882841f25a12bf54 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 12:23:39 -0400
Subject: davinci: dm365: EMAC support for SoC and dm365 EVM

The patch adds Support for EMAC in the DM365 SOC and
the DM365 EVM board.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 66 ++++++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-davinci/board-dm365-evm.c')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 08c2f12d03d1..9dda3999c8f3 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -19,12 +19,12 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-
+#include <linux/i2c/at24.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-
+#include <mach/mux.h>
 #include <mach/hardware.h>
 #include <mach/dm365.h>
 #include <mach/psc.h>
@@ -34,14 +34,69 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 
+#define DM365_EVM_PHY_MASK		(0x2)
+#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+};
+
 static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_freq	= 400	/* kHz */,
 	.bus_delay	= 0	/* usec */,
 };
 
+static void dm365evm_emac_configure(void)
+{
+	/*
+	 * EMAC pins are multiplexed with GPIO and UART
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
+	 */
+	davinci_cfg_reg(DM365_EMAC_TX_EN);
+	davinci_cfg_reg(DM365_EMAC_TX_CLK);
+	davinci_cfg_reg(DM365_EMAC_COL);
+	davinci_cfg_reg(DM365_EMAC_TXD3);
+	davinci_cfg_reg(DM365_EMAC_TXD2);
+	davinci_cfg_reg(DM365_EMAC_TXD1);
+	davinci_cfg_reg(DM365_EMAC_TXD0);
+	davinci_cfg_reg(DM365_EMAC_RXD3);
+	davinci_cfg_reg(DM365_EMAC_RXD2);
+	davinci_cfg_reg(DM365_EMAC_RXD1);
+	davinci_cfg_reg(DM365_EMAC_RXD0);
+	davinci_cfg_reg(DM365_EMAC_RX_CLK);
+	davinci_cfg_reg(DM365_EMAC_RX_DV);
+	davinci_cfg_reg(DM365_EMAC_RX_ER);
+	davinci_cfg_reg(DM365_EMAC_CRS);
+	davinci_cfg_reg(DM365_EMAC_MDIO);
+	davinci_cfg_reg(DM365_EMAC_MDCLK);
+
+	/*
+	 * EMAC interrupts are multiplexed with GPIO interrupts
+	 * Details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
+	 */
+	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
+	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct davinci_uart_config uart_config __initdata = {
@@ -55,8 +110,15 @@ static void __init dm365_evm_map_io(void)
 
 static __init void dm365_evm_init(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+
+	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
 }
 
 static __init void dm365_evm_irq_init(void)
-- 
cgit v1.2.3