From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- arch/arm/mach-davinci/board-dm365-evm.c | 1 + arch/arm/mach-davinci/dma.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index d15beceb632e..df4ab2105869 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886df04c..02d939853b88 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -23,6 +23,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From d99c3871148cb643cffe138e9427b7a743aca367 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 11 Mar 2010 14:57:35 -0800 Subject: davinci: timers: don't enable timer until clocksource is initialized On da830, when the same timer is used for clocksource and clockevent, the timer can be started before the clockevent is registered/initialzed. This creates a window where a timer interrupt might fire before the clockevent handler has been setup and causes a crash. This patch moves the actual enable/start of the timer after the clockevent has ben registered. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/time.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 42d985beece5..9e0b106b4f5f 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -253,8 +253,6 @@ static void __init timer_init(void) irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); } - - timer32_config(&timers[i]); } } @@ -331,6 +329,7 @@ static void __init davinci_timer_init(void) unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + int i; clockevent_id = soc_info->timer_info->clockevent_id; clocksource_id = soc_info->timer_info->clocksource_id; @@ -389,6 +388,9 @@ static void __init davinci_timer_init(void) clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); + + for (i=0; i< ARRAY_SIZE(timers); i++) + timer32_config(&timers[i]); } struct sys_timer davinci_timer = { -- cgit v1.2.3 From 5eb2e891f038c8e04757f4536b9693faf35978a3 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 10 Mar 2010 15:11:24 +0530 Subject: davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined The da8xx/omap-l1 boards refuse to build when CONFIG_DAVINCI_MUX is undefined because arch/arm/mach-davinci/mux.c:da8xx_pinmux_setup() is not defined. This patch fixes this issue. This is build tested with davinci_all_defconfig and da8xx_omapl_defconfig and boot tested on DA830 EVM. Reported-by: Shanmuga Sundaram Mahendran Signed-off-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/da8xx.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index cc9be7fee627..b87a6ba0de3c 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -144,6 +144,10 @@ extern const short da850_mmcsd0_pins[]; extern const short da850_nand_pins[]; extern const short da850_nor_pins[]; +#ifdef CONFIG_DAVINCI_MUX int da8xx_pinmux_setup(const short pins[]); +#else +static inline int da8xx_pinmux_setup(const short pins[]) { return 0; } +#endif #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ -- cgit v1.2.3 From bb17ef102b72e38557bfa829511e06c4bd3bb972 Mon Sep 17 00:00:00 2001 From: Brian Niebuhr Date: Tue, 9 Mar 2010 16:48:03 -0600 Subject: davinci: edma: clear events in edma_start() This patch fixes an issue where a DMA channel can erroneously process an event generated by a previous transfer. A failure case is where DMA is being used for SPI transmit and receive channels on OMAP L138. In this case there is a single bit that controls all event generation from the SPI peripheral. Therefore it is possible that between when edma_stop() has been called for the transmit channel on a previous transfer and edma_start() is called for the transmit channel on a subsequent transfer, that a transmit event has been generated. The fix is to clear events in edma_start(). This prevents false events from being processed when events are enabled for that channel. Signed-off-by: Brian Niebuhr Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886df04c..260485cc76df 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -1266,7 +1266,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); -- cgit v1.2.3 From c8e42de6efcf4e9bed79a8b030261d799ea1960a Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 25 Feb 2010 16:24:41 -0800 Subject: davinci: DM365: fix duplicate default IRQ priorities IRQ 29 has two possible interrupts DDRINT and RTC, but having both in the default priority table is confusing (and triggers a warning from sparse.) This patch removes the lower priority DDRINT from the default priority table leaving the RTC setting as the default. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm365.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 27772e18e45b..0d6ee583f65c 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, -- cgit v1.2.3 From 75392dd3041b8fb7ee4cef6bd9b71154ae34f4e1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 26 Mar 2010 17:56:58 +0300 Subject: davinci: fix compile warning: : #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/da8xx.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-davinci') diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index b87a6ba0de3c..03acfd39042b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -3,7 +3,7 @@ * * Author: Mark A. Greer * - * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -13,7 +13,9 @@ #include