From 48f6b0999673cce33e4a54d89c78460cc28e5156 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 2 Mar 2011 09:27:42 +0100 Subject: ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-pca100.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'arch/arm/mach-imx/mach-pca100.c') diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index f754bab040b6..63e182556778 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -267,7 +267,6 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = { .exit = pca100_sdhc2_exit, }; -#if defined(CONFIG_USB_ULPI) static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); @@ -295,7 +294,6 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_phy_init, .portsc = MXC_EHCI_MODE_ULPI, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -402,23 +400,22 @@ static void __init pca100_init(void) gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); gpio_direction_output(USBH2_PHY_CS_GPIO, 1); -#if defined(CONFIG_USB_ULPI) if (otg_mode_host) { - otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); + otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | + ULPI_OTG_DRVVBUS_EXT); - imx27_add_mxc_ehci_otg(&otg_pdata); + if (otg_pdata.otg) + imx27_add_mxc_ehci_otg(&otg_pdata); + } else { + gpio_set_value(OTG_PHY_CS_GPIO, 0); + imx27_add_fsl_usb2_udc(&otg_device_pdata); } usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - imx27_add_mxc_ehci_hs(2, &usbh2_pdata); -#endif - if (!otg_mode_host) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - imx27_add_fsl_usb2_udc(&otg_device_pdata); - } + if (usbh2_pdata.otg) + imx27_add_mxc_ehci_hs(2, &usbh2_pdata); imx27_add_imx_fb(&pca100_fb_data); -- cgit v1.2.3