From 16af5ee7d9556c47b332788e4107cbed5ee7ec10 Mon Sep 17 00:00:00 2001 From: Russell Robinson Jr Date: Mon, 11 Feb 2013 13:34:12 -0800 Subject: pcm052: usb: enable both USB0 and USB1 as ehci-host note: there are still intermittent detection errors with USB0 Signed-off-by: Russell Robinson Jr --- arch/arm/mach-mvf/usb_dr.c | 228 ++++++++++++++++++++++++++------------------- 1 file changed, 133 insertions(+), 95 deletions(-) (limited to 'arch/arm/mach-mvf/usb_dr.c') diff --git a/arch/arm/mach-mvf/usb_dr.c b/arch/arm/mach-mvf/usb_dr.c index bbd29f3b45a9..34377c4c19b3 100644 --- a/arch/arm/mach-mvf/usb_dr.c +++ b/arch/arm/mach-mvf/usb_dr.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -37,10 +38,6 @@ static void usbotg_clock_gate(bool on); static void _dr_discharge_line(bool enable); static void usbotg_wakeup_event_clear(void); -/* The usb_phy0_clk do not have enable/disable function at clock.c - * and PLL output for usb0's phy should be always enabled. - * usb_phy0_clk only stands for usb uses pll3 as its parent. - */ static struct clk *usb_phy0_clk; static u8 otg_used; @@ -65,24 +62,22 @@ static struct fsl_usb2_platform_data dr_utmi_config = { /* Platform data for wakeup operation */ static struct fsl_usb2_wakeup_platform_data dr_wakeup_config = { - .name = "Gadget wakeup", + .name = "Host wakeup", .usb_clock_for_pm = usbotg_clock_gate, .usb_wakeup_exhandle = usbotg_wakeup_event_clear, }; static void usbotg_internal_phy_clock_gate(bool on) { - u32 reg; - void __iomem *phy_reg = MVF_IO_ADDRESS(MVF_USBPHY0_BASE_ADDR); - reg = __raw_readl(phy_reg + HW_USBPHY_CTRL); if (on) - reg &= ~BM_USBPHY_CTRL_CLKGATE; + __raw_writel(BM_USBPHY_CTRL_CLKGATE, + phy_reg + HW_USBPHY_CTRL_CLR); else - reg |= BM_USBPHY_CTRL_CLKGATE; + __raw_writel(BM_USBPHY_CTRL_CLKGATE, + phy_reg + HW_USBPHY_CTRL_SET); - __raw_writel(reg, phy_reg + HW_USBPHY_CTRL); } static int usb_phy_enable(struct fsl_usb2_platform_data *pdata) @@ -114,6 +109,13 @@ static int usb_phy_enable(struct fsl_usb2_platform_data *pdata) /* Power up the PHY */ __raw_writel(0, phy_reg + HW_USBPHY_PWD); + if ((pdata->operating_mode == FSL_USB2_DR_HOST) || + (pdata->operating_mode == FSL_USB2_DR_OTG)) { + /* enable FS/LS device */ + __raw_writel( + BM_USBPHY_CTRL_ENUTMILEVEL2 | BM_USBPHY_CTRL_ENUTMILEVEL3, + phy_reg + HW_USBPHY_CTRL_SET); + } return 0; } @@ -136,8 +138,8 @@ static int usbotg_init_ext(struct platform_device *pdev) usbotg_internal_phy_clock_gate(true); usb_phy_enable(pdev->dev.platform_data); /* - * after the phy reset,can not read the value for id/vbus at - * the register of otgsc ,cannot read at once ,need delay 3 ms + * after the phy reset,can't read the value for id/vbus at + * the register of otgsc at once ,need delay 3 ms */ mdelay(3); } @@ -159,21 +161,18 @@ static void usbotg_uninit_ext(struct platform_device *pdev) static void usbotg_clock_gate(bool on) { - pr_debug("%s: on is %d\n", __func__, on); + if (on) clk_enable(usb_phy0_clk); else clk_disable(usb_phy0_clk); + } -/* -void mvf_set_otghost_vbus_func(driver_vbus_func driver_vbus) -{ - dr_utmi_config.platform_driver_vbus = driver_vbus; -} -*/ + static void _dr_discharge_line(bool enable) { void __iomem *phy_reg = MVF_IO_ADDRESS(MVF_USBPHY0_BASE_ADDR); + if (enable) { __raw_writel(BF_USBPHY_DEBUG_ENHSTPULLDOWN(0x3), phy_reg + HW_USBPHY_DEBUG_SET); @@ -191,7 +190,6 @@ static void _dr_discharge_line(bool enable) /* Below two macros are used at otg mode to indicate usb mode*/ #define ENABLED_BY_HOST (0x1 << 0) #define ENABLED_BY_DEVICE (0x1 << 1) -static u32 low_power_enable_src; /* only useful at otg mode */ static void enter_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) { @@ -233,12 +231,11 @@ static void enter_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, static void __phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable, int source) { - if (enable) { - low_power_enable_src |= source; + if (enable) enter_phy_lowpower_suspend(pdata, enable); - } else { + else { + pr_debug("phy lowpower disable\n"); enter_phy_lowpower_suspend(pdata, enable); - low_power_enable_src &= ~source; } } @@ -270,10 +267,9 @@ static void otg_wake_up_enable(struct fsl_usb2_platform_data *pdata, static void __wakeup_irq_enable(struct fsl_usb2_platform_data *pdata, bool on, int source) { - /* otg host and device share the OWIE bit, only when host and device - * all enable the wakeup irq, we can enable the OWIE bit - */ - if (on) { + pr_debug("USB Host %s,on=%d\n", __func__, on); + mdelay(3); + if (on) { otg_wake_up_enable(pdata, on); } else { otg_wake_up_enable(pdata, on); @@ -302,125 +298,167 @@ static void usbotg_wakeup_event_clear(void) } /* End of Common operation for DR port */ + #ifdef CONFIG_USB_EHCI_ARC_OTG -#endif /* CONFIG_USB_EHCI_ARC_OTG */ +/* Beginning of host related operation for DR port */ +static void _host_platform_suspend(struct fsl_usb2_platform_data *pdata) +{ + void __iomem *phy_reg = MVF_IO_ADDRESS(MVF_USBPHY0_BASE_ADDR); + u32 tmp; + tmp = (BM_USBPHY_PWD_TXPWDFS + | BM_USBPHY_PWD_TXPWDIBIAS + | BM_USBPHY_PWD_TXPWDV2I + | BM_USBPHY_PWD_RXPWDENV + | BM_USBPHY_PWD_RXPWD1PT1 + | BM_USBPHY_PWD_RXPWDDIFF + | BM_USBPHY_PWD_RXPWDRX); + __raw_writel(tmp, phy_reg + HW_USBPHY_PWD_SET); +} -#ifdef CONFIG_USB_GADGET_ARC -/* Beginning of device related operation for DR port */ -static void _device_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, +static void _host_platform_resume(struct fsl_usb2_platform_data *pdata) +{ + void __iomem *phy_reg = MVF_IO_ADDRESS(MVF_USBPHY0_BASE_ADDR); + u32 tmp; + + tmp = (BM_USBPHY_PWD_TXPWDFS + | BM_USBPHY_PWD_TXPWDIBIAS + | BM_USBPHY_PWD_TXPWDV2I + | BM_USBPHY_PWD_RXPWDENV + | BM_USBPHY_PWD_RXPWD1PT1 + | BM_USBPHY_PWD_RXPWDDIFF + | BM_USBPHY_PWD_RXPWDRX); + __raw_writel(tmp, phy_reg + HW_USBPHY_PWD_CLR); +} + +static void _host_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) { - __phy_lowpower_suspend(pdata, enable, ENABLED_BY_DEVICE); + __phy_lowpower_suspend(pdata, enable, ENABLED_BY_HOST); } -static void _device_wakeup_enable(struct fsl_usb2_platform_data *pdata, +static void _host_wakeup_enable(struct fsl_usb2_platform_data *pdata, bool enable) { - __wakeup_irq_enable(pdata, enable, ENABLED_BY_DEVICE); - if (enable) { - pr_debug("device wakeup enable\n"); + __wakeup_irq_enable(pdata, enable, ENABLED_BY_HOST); + + if (enable) device_wakeup_enable(&pdata->pdev->dev); - } else { - pr_debug("device wakeup disable\n"); + else device_wakeup_disable(&pdata->pdev->dev); - } } static enum usb_wakeup_event -_is_device_wakeup(struct fsl_usb2_platform_data *pdata) +_is_host_wakeup(struct fsl_usb2_platform_data *pdata) { - int wakeup_req = USBC0_CTRL & UCTRL_OWIR; + u32 wakeup_req = USBC0_CTRL & UCTRL_OWIR; + u32 otgsc = UOG_OTGSC; - /* if ID=1, it is a device wakeup event */ - if (wakeup_req && (UOG_OTGSC & OTGSC_STS_USB_ID) && - (UOG_USBSTS & USBSTS_URI)) { - printk(KERN_INFO "otg udc wakeup, host sends reset signal\n"); - return WAKEUP_EVENT_DPDM; - } - if (wakeup_req && (UOG_OTGSC & OTGSC_STS_USB_ID) && \ - ((UOG_USBSTS & USBSTS_PCI) || - (UOG_PORTSC1 & PORTSC_PORT_FORCE_RESUME))) { - /* - * When the line state from J to K, the Port Change Detect bit - * in the USBSTS register is also set to '1'. - */ - printk(KERN_INFO "otg udc wakeup, host sends resume signal\n"); - return WAKEUP_EVENT_DPDM; + if (wakeup_req) { + pr_debug("the otgsc is 0x%x, usbsts is 0x%x," + " portsc is 0x%x, wakeup_irq is 0x%x\n", + UOG_OTGSC, UOG_USBSTS, UOG_PORTSC1, wakeup_req); } - if (wakeup_req && (UOG_OTGSC & OTGSC_STS_USB_ID) && - (UOG_OTGSC & OTGSC_STS_A_VBUS_VALID) && - (UOG_OTGSC & OTGSC_IS_B_SESSION_VALID)) { - printk(KERN_INFO "otg udc vbus rising wakeup\n"); - return WAKEUP_EVENT_VBUS; + /* if ID change sts, it is a host wakeup event */ + if (wakeup_req && (otgsc & OTGSC_IS_USB_ID)) { + pr_debug("otg host ID wakeup\n"); + /* if host ID wakeup, we must clear the b session change sts */ + otgsc &= (~OTGSC_IS_USB_ID); + return WAKEUP_EVENT_ID; } - if (wakeup_req && (UOG_OTGSC & OTGSC_STS_USB_ID) && - !(UOG_OTGSC & OTGSC_STS_A_VBUS_VALID)) { - printk(KERN_INFO "otg udc vbus falling wakeup\n"); - return WAKEUP_EVENT_VBUS; + if (wakeup_req && (!(otgsc & OTGSC_STS_USB_ID))) { + pr_debug("otg host Remote wakeup\n"); + return WAKEUP_EVENT_DPDM; } - - return WAKEUP_EVENT_DPDM; + return WAKEUP_EVENT_INVALID; } -static void device_wakeup_handler(struct fsl_usb2_platform_data *pdata) +static void host_wakeup_handler(struct fsl_usb2_platform_data *pdata) { - _device_phy_lowpower_suspend(pdata, false); - _device_wakeup_enable(pdata, false); + _host_phy_lowpower_suspend(pdata, false); + _host_wakeup_enable(pdata, false); } -/* end of device related operation for DR port */ -#endif /* CONFIG_USB_GADGET_ARC */ + +/* End of host related operation for DR port */ +#endif /* CONFIG_USB_EHCI_ARC_OTG */ + void __init mvf_usb_dr_init(void) { struct platform_device *pdev, *pdev_wakeup; u32 reg; -#ifdef CONFIG_USB_GADGET_ARC - dr_utmi_config.operating_mode = DR_UDC_MODE; - dr_utmi_config.wake_up_enable = _device_wakeup_enable; - dr_utmi_config.platform_suspend = NULL; - dr_utmi_config.platform_resume = NULL; - dr_utmi_config.phy_lowpower_suspend = _device_phy_lowpower_suspend; - dr_utmi_config.is_wakeup_event = _is_device_wakeup; + +#ifdef CONFIG_USB_EHCI_ARC_OTG + dr_utmi_config.operating_mode = DR_HOST_MODE; + dr_utmi_config.wake_up_enable = _host_wakeup_enable; + dr_utmi_config.platform_suspend = _host_platform_suspend; + dr_utmi_config.platform_resume = _host_platform_resume; + dr_utmi_config.phy_lowpower_suspend = _host_phy_lowpower_suspend; + dr_utmi_config.is_wakeup_event = _is_host_wakeup; dr_utmi_config.wakeup_pdata = &dr_wakeup_config; - dr_utmi_config.wakeup_handler = device_wakeup_handler; + dr_utmi_config.wakeup_handler = host_wakeup_handler; - pdev = mvf_add_fsl_usb2_udc(&dr_utmi_config); + pdev = mvf_add_fsl_ehci_otg(0, &dr_utmi_config); - dr_wakeup_config.usb_pdata[2] = pdev->dev.platform_data; + dr_wakeup_config.usb_pdata[0] = pdev->dev.platform_data; /* register wakeup device */ - pdev_wakeup = mvf_add_fsl_usb2_udc_wakeup(&dr_wakeup_config); + pdev_wakeup = mvf_add_fsl_usb2_ehci_otg_wakeup(0, &dr_wakeup_config); if (pdev != NULL) ((struct fsl_usb2_platform_data *) (pdev->dev.platform_data))->wakeup_pdata = (struct fsl_usb2_wakeup_platform_data *) (pdev_wakeup->dev.platform_data); - device_set_wakeup_capable(&pdev->dev, true); - __raw_writel(((0x01 << 30) | 0x2), ANADIG_USB1_MISC); - - __raw_writel(0x00000894, USBPHY1_CTRL); - udelay(10); + __raw_writel(0x0220C802, USBPHY1_CTRL); + udelay(20); __raw_writel(0x0, USBPHY1_PWD); - __raw_writel(0x1, USBPHY1_IP); - udelay(20); - __raw_writel(0x7, USBPHY1_IP); reg = __raw_readl(USBPHY1_DEBUG); - reg &= ~0x40000000; /* clear gate clock */ + reg &= ~0x40000000; /* clear clock gate */ __raw_writel(reg, USBPHY1_DEBUG); + reg = __raw_readl(ANADIG_USB1_MISC); + reg |= (0x01 << 30); /* Enable CLK_TO_UTMI */ + __raw_writel(reg, ANADIG_USB1_MISC); + __raw_writel(0x10000007, USBPHY1_TX); + /*__raw_writel(0x100F0F07, USBPHY1_TX);*/ + + /* Enable disconnect detect */ reg = __raw_readl(USBPHY1_CTRL); - reg |= ((0xD1 << 11) | 0x6); + reg &= ~0x040; /* clear OTG ID change IRQ */ + reg |= (0x1 << 14); /* Enable UTMI+ level2 */ + reg |= (0x1 << 9); + reg |= (0x1 << 15); /* Enable UTMI+ level3 */ + reg &= ~((0xD1 << 11) | 0x6); __raw_writel(reg, USBPHY1_CTRL); + __raw_writel(0x1 << 3, USBPHY1_CTRL + 0x8); + /* Disable VBUS and CHARGER detect */ reg = __raw_readl(ANADIG_USB1_VBUS_DETECT); reg |= 0xE8; __raw_writel(reg, ANADIG_USB1_VBUS_DETECT); __raw_writel(0x001c0000, ANADIG_USB1_CHRG_DETECT); + #endif +} + +/* USB HIGH_SPEED disconnect detect on/off */ +void fsl_platform_set_usb0_phy_dis(struct fsl_usb2_platform_data *pdata, + bool enable) +{ + u32 reg; + reg = __raw_readl(USBPHY1_CTRL); + + if (enable) + reg |= ((0xD1 << 11) | 0x6); + else + reg &= ~((0xD1 << 11) | 0x6); + + __raw_writel(reg, USBPHY1_CTRL); + + __raw_writel(0x1 << 3, USBPHY1_CTRL + 0x8); } -- cgit v1.2.3