From 0d4ab9a58ff6d29e84b6f29a5084323f0374ef6a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 12 May 2011 21:31:02 +0000 Subject: omap: igep0020: minor refactoring to allow easy addition of IGEP3 Signed-off-by: Mike Rapoport Acked-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 57 +++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 27 deletions(-) (limited to 'arch/arm/mach-omap2/board-igep0020.c') diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index ad20f7b5aa4a..ea7cbc69f7cd 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -299,17 +299,14 @@ static struct omap2_hsmmc_info mmc[] = { static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", - .gpio = IGEP2_GPIO_LED0_RED, .default_trigger = "default-off" }, [1] = { .name = "gpio-led:green:d0", - .gpio = IGEP2_GPIO_LED0_GREEN, .default_trigger = "default-off", }, [2] = { .name = "gpio-led:red:d1", - .gpio = IGEP2_GPIO_LED1_RED, .default_trigger = "default-off", }, [3] = { @@ -335,6 +332,10 @@ static struct platform_device igep_led_device = { static void __init igep_leds_init(void) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + platform_device_register(&igep_led_device); } @@ -347,14 +348,15 @@ static struct gpio igep_gpio_leds[] __initdata = { static inline void igep_leds_init(void) { + int i; + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { pr_warning("IGEP v2: Could not obtain leds gpios\n"); return; } - gpio_export(IGEP2_GPIO_LED0_RED, 0); - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - gpio_export(IGEP2_GPIO_LED1_RED, 0); + for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) + gpio_export(igep_gpio_leds[i].gpio, 0); } #endif @@ -372,6 +374,18 @@ static int igep_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); + else + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); +#else + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -385,18 +399,6 @@ static int igep_twl_gpio_setup(struct device *dev, if (ret < 0) pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, - "gpio-led:green:d1"); - if (ret == 0) - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - else - pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - return 0; }; @@ -531,11 +533,8 @@ static struct twl4030_platform_data igep_twldata = { /* platform_data for children goes here */ .usb = &igep_usb_data, - .codec = &igep2_codec_data, .gpio = &igep_twl4030_gpio_pdata, - .keypad = &igep2_keypad_pdata, .vmmc1 = &igep_vmmc1, - .vpll2 = &igep2_vpll2, .vio = &igep_vio, }; @@ -549,8 +548,6 @@ static void __init igep_i2c_init(void) { int ret; - omap3_pmic_init("twl4030", &igep_twldata); - /* * Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz @@ -559,6 +556,12 @@ static void __init igep_i2c_init(void) ARRAY_SIZE(igep2_i2c3_boardinfo)); if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + + omap3_pmic_init("twl4030", &igep_twldata); } static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { @@ -630,15 +633,11 @@ static void __init igep_init(void) /* Register I2C busses and drivers */ igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); - omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(NULL); - usbhs_init(&igep2_usbhs_bdata); igep_flash_init(); igep_leds_init(); - igep2_display_init(); - igep2_init_smsc911x(); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN @@ -646,6 +645,10 @@ static void __init igep_init(void) */ igep_wlan_bt_init(); + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); } MACHINE_START(IGEP0020, "IGEP v2 board") -- cgit v1.2.3