From 07b308eee06e9dacdfc2b54746613e838bef582d Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Wed, 1 Aug 2018 23:32:28 +0530 Subject: arm64: dts: actions: s900-bubblegum-96: Enable I2C1 and I2C2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add pinctrl definitions for Actions Semiconductor S900 I2C controllers. Pinctrl definitions are only available for I2C0, I2C1, and I2C2. Enable I2C1 and I2C2 exposed on the low speed expansion connector in Bubblegum-96 board. Signed-off-by: Manivannan Sadhasivam [AF: Squashed] Signed-off-by: Andreas Färber --- arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 43 +++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch/arm64/boot/dts/actions') diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index ca17182edd8f..732daaa6e9d3 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -25,6 +25,24 @@ }; }; +&i2c0 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + /* * GPIO name legend: proper name = the GPIO line is used as GPIO * NC = not connected (pin out but not routed from the chip to @@ -198,6 +216,31 @@ "UART3_TX", /* GPIO_143 */ "UART3_RTSB", /* GPIO_144 */ "UART3_CTSB"; /* GPIO_145 */ + + i2c0_default: i2c0-default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1-default { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_default: i2c2-default { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; }; &timer { -- cgit v1.2.3