From b6ff27217e58d3b3a900debbd90924375aa62d30 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:41 +0100 Subject: ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also explicitly specify the phy-mode instead of relying on the default-value from meson-gx.dtsi. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c59403adb387..6b5579522587 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -152,6 +152,11 @@ pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; mdio { compatible = "snps,dwmac-mdio"; -- cgit v1.2.3