From bfb476290f2f0b9e6df4e9717738875754c7d242 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 25 Feb 2015 13:06:50 +0100 Subject: arm64: juno: Add APB registers and LEDs using syscon This defines the Juno "APB system registers" as a syscon device, and all the LEDs controlled by the APB system registers right below it using the syscon LEDs driver on top of syscon. Define LED0 for heartbeat, LED1 for MMC0 activity and the following four LEDs indicating CPU activity using the Linux-specific DT bindings for triggers. This is the pattern and same drivers as used on the legacy platform device trees for the ARM Integrators and the RealView PB1176. Cc: Arnd Bergmann Cc: Mark Rutland Cc: Robin Murphy Cc: Pawel Moll Tested-by: Liviu Dudau Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 68 +++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'arch/arm64/boot/dts/arm/juno-motherboard.dtsi') diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index c138b95a8356..5ce111dcf16d 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -66,6 +66,74 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; + apbregs@010000 { + compatible = "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "vexpress:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "vexpress:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "vexpress:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "vexpress:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "vexpress:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "vexpress:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "vexpress:7"; + default-state = "off"; + }; + }; + mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; -- cgit v1.2.3