From 1761101048a3144bf141359b15a6132c3d3cc001 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Thu, 28 Feb 2019 21:15:11 +0530 Subject: arm64: dts: hisilicon: hikey970: Add SD and WiFi support Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to the absence of the PMIC driver, fixed regulators are sourced to make the driver working. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 75 ++++++++++++++ .../arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi | 115 +++++++++++++++++++++ 2 files changed, 190 insertions(+) (limited to 'arch/arm64/boot/dts/hisilicon') diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index c9775b66629f..7dac33d4fd5c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" @@ -17,6 +18,8 @@ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -35,6 +38,37 @@ /* expect bootloader to fill in this region */ reg = <0x0 0x0 0x0 0x0>; }; + + sd_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; /* @@ -354,6 +388,47 @@ "GPIO_231_HDMI_INT"; }; +&dwmmc1 { + bus-width = <0x4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sd-highspeed; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + vmmc-supply = <&sd_3v3>; + vqmmc-supply = <&sd_1v8>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; + broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_177_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; +}; + &uart0 { /* On High speed expansion header */ label = "HS-UART0"; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index 67bb52d43619..d456b0aa6f58 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -196,6 +196,16 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 10 0>; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; }; pmx6: pinmux@fc182800 { @@ -203,6 +213,52 @@ reg = <0x0 0xfc182800 0x0 0x028>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA DRIVE6_MASK + >; + }; }; pmx7: pinmux@ff37e000 { @@ -214,6 +270,17 @@ pinctrl-single,function-mask = <7>; /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; }; pmx8: pinmux@ff37e800 { @@ -221,6 +288,54 @@ reg = <0x0 0xff37e800 0x0 0x030>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; }; pmx1: pinmux@fff11000 { -- cgit v1.2.3