From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/parisc/Kconfig | 199 +++ arch/parisc/Kconfig.debug | 14 + arch/parisc/Makefile | 121 ++ arch/parisc/configs/712_defconfig | 891 ++++++++++ arch/parisc/configs/a500_defconfig | 1010 +++++++++++ arch/parisc/configs/b180_defconfig | 839 ++++++++++ arch/parisc/configs/c3000_defconfig | 1126 +++++++++++++ arch/parisc/defconfig | 926 +++++++++++ arch/parisc/defpalo.conf | 21 + arch/parisc/hpux/Makefile | 5 + arch/parisc/hpux/entry_hpux.S | 547 ++++++ arch/parisc/hpux/fs.c | 199 +++ arch/parisc/hpux/gate.S | 116 ++ arch/parisc/hpux/ioctl.c | 73 + arch/parisc/hpux/sys_hpux.c | 985 +++++++++++ arch/parisc/hpux/wrappers.S | 257 +++ arch/parisc/install.sh | 38 + arch/parisc/kernel/Makefile | 24 + arch/parisc/kernel/asm-offsets.c | 299 ++++ arch/parisc/kernel/binfmt_elf32.c | 126 ++ arch/parisc/kernel/cache.c | 366 ++++ arch/parisc/kernel/drivers.c | 765 +++++++++ arch/parisc/kernel/entry.S | 2426 +++++++++++++++++++++++++++ arch/parisc/kernel/firmware.c | 1405 ++++++++++++++++ arch/parisc/kernel/hardware.c | 1366 +++++++++++++++ arch/parisc/kernel/head.S | 386 +++++ arch/parisc/kernel/hpmc.S | 304 ++++ arch/parisc/kernel/init_task.c | 76 + arch/parisc/kernel/inventory.c | 612 +++++++ arch/parisc/kernel/ioctl32.c | 625 +++++++ arch/parisc/kernel/irq.c | 343 ++++ arch/parisc/kernel/module.c | 822 +++++++++ arch/parisc/kernel/pa7300lc.c | 49 + arch/parisc/kernel/pacache.S | 1086 ++++++++++++ arch/parisc/kernel/parisc_ksyms.c | 187 +++ arch/parisc/kernel/pci-dma.c | 578 +++++++ arch/parisc/kernel/pci.c | 346 ++++ arch/parisc/kernel/pdc_chassis.c | 245 +++ arch/parisc/kernel/pdc_cons.c | 189 +++ arch/parisc/kernel/perf.c | 841 ++++++++++ arch/parisc/kernel/perf_asm.S | 1691 +++++++++++++++++++ arch/parisc/kernel/perf_images.h | 3138 +++++++++++++++++++++++++++++++++++ arch/parisc/kernel/process.c | 396 +++++ arch/parisc/kernel/processor.c | 400 +++++ arch/parisc/kernel/ptrace.c | 423 +++++ arch/parisc/kernel/real2.S | 304 ++++ arch/parisc/kernel/semaphore.c | 102 ++ arch/parisc/kernel/setup.c | 368 ++++ arch/parisc/kernel/signal.c | 664 ++++++++ arch/parisc/kernel/signal32.c | 400 +++++ arch/parisc/kernel/signal32.h | 43 + arch/parisc/kernel/smp.c | 723 ++++++++ arch/parisc/kernel/sys32.h | 48 + arch/parisc/kernel/sys_parisc.c | 253 +++ arch/parisc/kernel/sys_parisc32.c | 720 ++++++++ arch/parisc/kernel/syscall.S | 703 ++++++++ arch/parisc/kernel/syscall_table.S | 372 +++++ arch/parisc/kernel/time.c | 243 +++ arch/parisc/kernel/topology.c | 37 + arch/parisc/kernel/traps.c | 834 ++++++++++ arch/parisc/kernel/unaligned.c | 816 +++++++++ arch/parisc/kernel/unwind.c | 393 +++++ arch/parisc/kernel/vmlinux.lds.S | 207 +++ arch/parisc/lib/Makefile | 9 + arch/parisc/lib/bitops.c | 84 + arch/parisc/lib/checksum.c | 148 ++ arch/parisc/lib/debuglocks.c | 277 ++++ arch/parisc/lib/fixup.S | 89 + arch/parisc/lib/io.c | 488 ++++++ arch/parisc/lib/iomap.c | 422 +++++ arch/parisc/lib/lusercopy.S | 193 +++ arch/parisc/lib/memcpy.c | 522 ++++++ arch/parisc/lib/memset.c | 91 + arch/parisc/math-emu/Makefile | 19 + arch/parisc/math-emu/README | 11 + arch/parisc/math-emu/cnv_float.h | 377 +++++ arch/parisc/math-emu/dbl_float.h | 847 ++++++++++ arch/parisc/math-emu/decode_exc.c | 368 ++++ arch/parisc/math-emu/denormal.c | 135 ++ arch/parisc/math-emu/dfadd.c | 524 ++++++ arch/parisc/math-emu/dfcmp.c | 181 ++ arch/parisc/math-emu/dfdiv.c | 400 +++++ arch/parisc/math-emu/dfmpy.c | 394 +++++ arch/parisc/math-emu/dfrem.c | 297 ++++ arch/parisc/math-emu/dfsqrt.c | 195 +++ arch/parisc/math-emu/dfsub.c | 526 ++++++ arch/parisc/math-emu/driver.c | 128 ++ arch/parisc/math-emu/fcnvff.c | 309 ++++ arch/parisc/math-emu/fcnvfu.c | 536 ++++++ arch/parisc/math-emu/fcnvfut.c | 332 ++++ arch/parisc/math-emu/fcnvfx.c | 501 ++++++ arch/parisc/math-emu/fcnvfxt.c | 328 ++++ arch/parisc/math-emu/fcnvuf.c | 318 ++++ arch/parisc/math-emu/fcnvxf.c | 386 +++++ arch/parisc/math-emu/float.h | 582 +++++++ arch/parisc/math-emu/fmpyfadd.c | 2655 +++++++++++++++++++++++++++++ arch/parisc/math-emu/fpbits.h | 65 + arch/parisc/math-emu/fpu.h | 76 + arch/parisc/math-emu/fpudispatch.c | 1442 ++++++++++++++++ arch/parisc/math-emu/frnd.c | 252 +++ arch/parisc/math-emu/hppa.h | 42 + arch/parisc/math-emu/math-emu.h | 27 + arch/parisc/math-emu/sfadd.c | 518 ++++++ arch/parisc/math-emu/sfcmp.c | 155 ++ arch/parisc/math-emu/sfdiv.c | 392 +++++ arch/parisc/math-emu/sfmpy.c | 380 +++++ arch/parisc/math-emu/sfrem.c | 290 ++++ arch/parisc/math-emu/sfsqrt.c | 187 +++ arch/parisc/math-emu/sfsub.c | 521 ++++++ arch/parisc/math-emu/sgl_float.h | 486 ++++++ arch/parisc/mm/Makefile | 5 + arch/parisc/mm/fault.c | 271 +++ arch/parisc/mm/init.c | 1019 ++++++++++++ arch/parisc/mm/ioremap.c | 207 +++ arch/parisc/mm/kmap.c | 166 ++ arch/parisc/nm | 6 + arch/parisc/oprofile/Kconfig | 23 + arch/parisc/oprofile/Makefile | 9 + arch/parisc/oprofile/init.c | 23 + 119 files changed, 53345 insertions(+) create mode 100644 arch/parisc/Kconfig create mode 100644 arch/parisc/Kconfig.debug create mode 100644 arch/parisc/Makefile create mode 100644 arch/parisc/configs/712_defconfig create mode 100644 arch/parisc/configs/a500_defconfig create mode 100644 arch/parisc/configs/b180_defconfig create mode 100644 arch/parisc/configs/c3000_defconfig create mode 100644 arch/parisc/defconfig create mode 100644 arch/parisc/defpalo.conf create mode 100644 arch/parisc/hpux/Makefile create mode 100644 arch/parisc/hpux/entry_hpux.S create mode 100644 arch/parisc/hpux/fs.c create mode 100644 arch/parisc/hpux/gate.S create mode 100644 arch/parisc/hpux/ioctl.c create mode 100644 arch/parisc/hpux/sys_hpux.c create mode 100644 arch/parisc/hpux/wrappers.S create mode 100644 arch/parisc/install.sh create mode 100644 arch/parisc/kernel/Makefile create mode 100644 arch/parisc/kernel/asm-offsets.c create mode 100644 arch/parisc/kernel/binfmt_elf32.c create mode 100644 arch/parisc/kernel/cache.c create mode 100644 arch/parisc/kernel/drivers.c create mode 100644 arch/parisc/kernel/entry.S create mode 100644 arch/parisc/kernel/firmware.c create mode 100644 arch/parisc/kernel/hardware.c create mode 100644 arch/parisc/kernel/head.S create mode 100644 arch/parisc/kernel/hpmc.S create mode 100644 arch/parisc/kernel/init_task.c create mode 100644 arch/parisc/kernel/inventory.c create mode 100644 arch/parisc/kernel/ioctl32.c create mode 100644 arch/parisc/kernel/irq.c create mode 100644 arch/parisc/kernel/module.c create mode 100644 arch/parisc/kernel/pa7300lc.c create mode 100644 arch/parisc/kernel/pacache.S create mode 100644 arch/parisc/kernel/parisc_ksyms.c create mode 100644 arch/parisc/kernel/pci-dma.c create mode 100644 arch/parisc/kernel/pci.c create mode 100644 arch/parisc/kernel/pdc_chassis.c create mode 100644 arch/parisc/kernel/pdc_cons.c create mode 100644 arch/parisc/kernel/perf.c create mode 100644 arch/parisc/kernel/perf_asm.S create mode 100644 arch/parisc/kernel/perf_images.h create mode 100644 arch/parisc/kernel/process.c create mode 100644 arch/parisc/kernel/processor.c create mode 100644 arch/parisc/kernel/ptrace.c create mode 100644 arch/parisc/kernel/real2.S create mode 100644 arch/parisc/kernel/semaphore.c create mode 100644 arch/parisc/kernel/setup.c create mode 100644 arch/parisc/kernel/signal.c create mode 100644 arch/parisc/kernel/signal32.c create mode 100644 arch/parisc/kernel/signal32.h create mode 100644 arch/parisc/kernel/smp.c create mode 100644 arch/parisc/kernel/sys32.h create mode 100644 arch/parisc/kernel/sys_parisc.c create mode 100644 arch/parisc/kernel/sys_parisc32.c create mode 100644 arch/parisc/kernel/syscall.S create mode 100644 arch/parisc/kernel/syscall_table.S create mode 100644 arch/parisc/kernel/time.c create mode 100644 arch/parisc/kernel/topology.c create mode 100644 arch/parisc/kernel/traps.c create mode 100644 arch/parisc/kernel/unaligned.c create mode 100644 arch/parisc/kernel/unwind.c create mode 100644 arch/parisc/kernel/vmlinux.lds.S create mode 100644 arch/parisc/lib/Makefile create mode 100644 arch/parisc/lib/bitops.c create mode 100644 arch/parisc/lib/checksum.c create mode 100644 arch/parisc/lib/debuglocks.c create mode 100644 arch/parisc/lib/fixup.S create mode 100644 arch/parisc/lib/io.c create mode 100644 arch/parisc/lib/iomap.c create mode 100644 arch/parisc/lib/lusercopy.S create mode 100644 arch/parisc/lib/memcpy.c create mode 100644 arch/parisc/lib/memset.c create mode 100644 arch/parisc/math-emu/Makefile create mode 100644 arch/parisc/math-emu/README create mode 100644 arch/parisc/math-emu/cnv_float.h create mode 100644 arch/parisc/math-emu/dbl_float.h create mode 100644 arch/parisc/math-emu/decode_exc.c create mode 100644 arch/parisc/math-emu/denormal.c create mode 100644 arch/parisc/math-emu/dfadd.c create mode 100644 arch/parisc/math-emu/dfcmp.c create mode 100644 arch/parisc/math-emu/dfdiv.c create mode 100644 arch/parisc/math-emu/dfmpy.c create mode 100644 arch/parisc/math-emu/dfrem.c create mode 100644 arch/parisc/math-emu/dfsqrt.c create mode 100644 arch/parisc/math-emu/dfsub.c create mode 100644 arch/parisc/math-emu/driver.c create mode 100644 arch/parisc/math-emu/fcnvff.c create mode 100644 arch/parisc/math-emu/fcnvfu.c create mode 100644 arch/parisc/math-emu/fcnvfut.c create mode 100644 arch/parisc/math-emu/fcnvfx.c create mode 100644 arch/parisc/math-emu/fcnvfxt.c create mode 100644 arch/parisc/math-emu/fcnvuf.c create mode 100644 arch/parisc/math-emu/fcnvxf.c create mode 100644 arch/parisc/math-emu/float.h create mode 100644 arch/parisc/math-emu/fmpyfadd.c create mode 100644 arch/parisc/math-emu/fpbits.h create mode 100644 arch/parisc/math-emu/fpu.h create mode 100644 arch/parisc/math-emu/fpudispatch.c create mode 100644 arch/parisc/math-emu/frnd.c create mode 100644 arch/parisc/math-emu/hppa.h create mode 100644 arch/parisc/math-emu/math-emu.h create mode 100644 arch/parisc/math-emu/sfadd.c create mode 100644 arch/parisc/math-emu/sfcmp.c create mode 100644 arch/parisc/math-emu/sfdiv.c create mode 100644 arch/parisc/math-emu/sfmpy.c create mode 100644 arch/parisc/math-emu/sfrem.c create mode 100644 arch/parisc/math-emu/sfsqrt.c create mode 100644 arch/parisc/math-emu/sfsub.c create mode 100644 arch/parisc/math-emu/sgl_float.h create mode 100644 arch/parisc/mm/Makefile create mode 100644 arch/parisc/mm/fault.c create mode 100644 arch/parisc/mm/init.c create mode 100644 arch/parisc/mm/ioremap.c create mode 100644 arch/parisc/mm/kmap.c create mode 100644 arch/parisc/nm create mode 100644 arch/parisc/oprofile/Kconfig create mode 100644 arch/parisc/oprofile/Makefile create mode 100644 arch/parisc/oprofile/init.c (limited to 'arch/parisc') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig new file mode 100644 index 000000000000..5b5cd00d98ca --- /dev/null +++ b/arch/parisc/Kconfig @@ -0,0 +1,199 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "Linux/PA-RISC Kernel Configuration" + +config PARISC + def_bool y + help + The PA-RISC microprocessor is designed by Hewlett-Packard and used + in many of their workstations & servers (HP9000 700 and 800 series, + and later HP3000 series). The PA-RISC Linux project home page is + at . + +config MMU + def_bool y + +config STACK_GROWSUP + def_bool y + +config UID16 + bool + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config GENERIC_ISA_DMA + bool + +config GENERIC_HARDIRQS + def_bool y + +config GENERIC_IRQ_PROBE + def_bool y + +# unless you want to implement ACPI on PA-RISC ... ;-) +config PM + bool + +source "init/Kconfig" + + +menu "Processor type and features" + +choice + prompt "Processor type" + default PA7000 + +config PA7000 + bool "PA7000/PA7100" + ---help--- + This is the processor type of your CPU. This information is + used for optimizing purposes. In order to compile a kernel + that can run on all 32-bit PA CPUs (albeit not optimally fast), + you can specify "PA7000" here. + + Specifying "PA8000" here will allow you to select a 64-bit kernel + which is required on some machines. + +config PA7100LC + bool "PA7100LC" + help + Select this option for the PCX-L processor, as used in the + 712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748, + D200, D210, D300, D310 and E-class + +config PA7200 + bool "PA7200" + help + Select this option for the PCX-T' processor, as used in the + C100, C110, J100, J110, J210XC, D250, D260, D350, D360, + K100, K200, K210, K220, K400, K410 and K420 + +config PA7300LC + bool "PA7300LC" + help + Select this option for the PCX-L2 processor, as used in the + 744, A180, B132L, B160L, B180L, C132L, C160L, C180L, + D220, D230, D320 and D330. + +config PA8X00 + bool "PA8000 and up" + help + Select this option for PCX-U to PCX-W2 processors. + +endchoice + +# Define implied options from the CPU selection here + +config PA20 + def_bool y + depends on PA8X00 + +config PA11 + def_bool y + depends on PA7000 || PA7100LC || PA7200 || PA7300LC + +config PREFETCH + def_bool y + depends on PA8X00 + +config 64BIT + bool "64-bit kernel" + depends on PA8X00 + help + Enable this if you want to support 64bit kernel on PA-RISC platform. + + At the moment, only people willing to use more than 2GB of RAM, + or having a 64bit-only capable PA-RISC machine should say Y here. + + Since there is no 64bit userland on PA-RISC, there is no point to + enable this option otherwise. The 64bit kernel is significantly bigger + and slower than the 32bit one. + +config SMP + bool "Symmetric multi-processing support" + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. + + See also the , + and the SMP-HOWTO available + at . + + If you don't know what to do here, say N. + +config HOTPLUG_CPU + bool + default y if SMP + select HOTPLUG + +config DISCONTIGMEM + bool "Discontiguous memory support (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See for more. + +config PREEMPT + bool +# bool "Preemptible Kernel" + default n + +config COMPAT + def_bool y + depends on 64BIT + +config HPUX + bool "Support for HP-UX binaries" + depends on !64BIT + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "32" + +endmenu + + +source "drivers/parisc/Kconfig" + + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/parisc/oprofile/Kconfig" + +source "arch/parisc/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug new file mode 100644 index 000000000000..8caaed187a1f --- /dev/null +++ b/arch/parisc/Kconfig.debug @@ -0,0 +1,14 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config DEBUG_RWLOCK + bool "Read-write spinlock debugging" + depends on DEBUG_KERNEL && SMP + help + If you say Y here then read-write lock processing will count how many + times it has tried to get the lock and issue an error message after + too many attempts. If you suspect a rwlock problem or a kernel + hacker asks for this option then say Y. Otherwise say N. + +endmenu diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile new file mode 100644 index 000000000000..0403d2fcb85e --- /dev/null +++ b/arch/parisc/Makefile @@ -0,0 +1,121 @@ +# +# parisc/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# Portions Copyright (C) 1999 The Puffin Group +# +# Modified for PA-RISC Linux by Paul Lahaie, Alex deVries, +# Mike Shaver, Helge Deller and Martin K. Petersen +# +NM = sh $(srctree)/arch/parisc/nm +CHECKFLAGS += -D__hppa__=1 + +ifdef CONFIG_64BIT +CROSS_COMPILE := hppa64-linux- +UTS_MACHINE := parisc64 +CHECKFLAGS += -D__LP64__=1 -m64 +else +MACHINE := $(subst 64,,$(shell uname -m)) +ifneq ($(MACHINE),parisc) +CROSS_COMPILE := hppa-linux- +endif +endif + +FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align + +OBJCOPY_FLAGS =-O binary -R .note -R .comment -S + +cflags-y := -pipe + +# These flags should be implied by an hppa-linux configuration, but they +# are not in gcc 3.2. +cflags-y += -mno-space-regs -mfast-indirect-calls + +# Currently we save and restore fpregs on all kernel entry/interruption paths. +# If that gets optimized, we might need to disable the use of fpregs in the +# kernel. +#cflags-y += -mdisable-fpregs + +# Without this, "ld -r" results in .text sections that are too big +# (> 0x40000) for branches to reach stubs. +cflags-y += -ffunction-sections + +# select which processor to optimise for +cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 +cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC +cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 +cflags-$(CONFIG_PA8X00) += -march=2.0 -mschedule=8000 + +head-y := arch/parisc/kernel/head.o + +CFLAGS += $(cflags-y) + +kernel-y := mm/ kernel/ math-emu/ kernel/init_task.o +kernel-$(CONFIG_HPUX) += hpux/ + +core-y += $(addprefix arch/parisc/, $(kernel-y)) +libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name` + +drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/ + +PALO := $(shell if which palo; then : ; \ + elif [ -x /sbin/palo ]; then echo /sbin/palo; \ + fi) + +palo: vmlinux + @if [ -x $PALO ]; then \ + echo 'ERROR: Please install palo first (apt-get install palo)';\ + echo 'or build it from source and install it somewhere in your $$PATH';\ + false; \ + fi + @if [ ! -f ./palo.conf ]; then \ + cp arch/parisc/defpalo.conf palo.conf; \ + echo 'A generic palo config file (./palo.conf) has been created for you.'; \ + echo 'You should check it and re-run "make palo".'; \ + echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \ + false; \ + fi + $(PALO) -f ./palo.conf + +oldpalo: vmlinux + export TOPDIR=`pwd`; \ + unset STRIP LDFLAGS CPP CPPFLAGS AFLAGS CFLAGS CC LD; cd ../palo && make lifimage + +# Shorthands for known targets not supported by parisc, use palo as default +Image zImage bzImage: palo + +kernel_install: vmlinux + sh $(src)/arch/parisc/install.sh \ + $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)" + +install: kernel_install modules_install + +prepare: include/asm-parisc/offsets.h + +arch/parisc/kernel/asm-offsets.s: include/asm include/linux/version.h \ + include/config/MARKER + +include/asm-parisc/offsets.h: arch/parisc/kernel/asm-offsets.s + $(call filechk,gen-asm-offsets) + +CLEAN_FILES += lifimage include/asm-parisc/offsets.h +MRPROPER_FILES += palo.conf + +define archhelp + @echo '* vmlinux - Uncompressed kernel image (./vmlinux)' + @echo ' palo - Bootable image (./lifimage)' + @echo ' install - Install kernel using' + @echo ' (your) ~/bin/installkernel or' + @echo ' (distribution) /sbin/installkernel or' + @echo ' copy to $$(INSTALL_PATH)' +endef diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig new file mode 100644 index 000000000000..872085dea8a8 --- /dev/null +++ b/arch/parisc/configs/712_defconfig @@ -0,0 +1,891 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-pa5 +# Wed Jan 5 13:20:32 2005 +# +CONFIG_PARISC=y +CONFIG_MMU=y +CONFIG_STACK_GROWSUP=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Processor type and features +# +# CONFIG_PA7000 is not set +CONFIG_PA7100LC=y +# CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set +# CONFIG_PA8X00 is not set +CONFIG_PA11=y +# CONFIG_64BIT is not set +# CONFIG_SMP is not set +# CONFIG_DISCONTIGMEM is not set +# CONFIG_PREEMPT is not set +# CONFIG_HPUX is not set + +# +# Bus options (PCI, PCMCIA, EISA, GSC, ISA) +# +CONFIG_GSC=y +# CONFIG_HPPB is not set +# CONFIG_IOMMU_CCIO is not set +CONFIG_GSC_LASI=y +# CONFIG_GSC_WAX is not set +# CONFIG_EISA is not set +# CONFIG_PCI is not set +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_PC_CML1=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_MEM_MAPPED=y +CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_ZALON is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_NAT_LOCAL is not set +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_NF_COMPAT_IPCHAINS is not set +# CONFIG_IP_NF_COMPAT_IPFWADM is not set +CONFIG_XFRM=y +CONFIG_XFRM_USER=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +CONFIG_LASI_82596=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ATMEL is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_HIL is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_SERIAL=m +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MOUSE_HIL=m +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MUX is not set +CONFIG_PDC_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +CONFIG_PPDEV=m +# CONFIG_TIPAR is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_STI=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=128 +CONFIG_DUMMY_CONSOLE_ROWS=48 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_PARISC_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# GSC devices +# +CONFIG_SND_HARMONY=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_RT is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y +# CONFIG_TMPFS_SECURITY is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig new file mode 100644 index 000000000000..d28ebfa1070d --- /dev/null +++ b/arch/parisc/configs/a500_defconfig @@ -0,0 +1,1010 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-rc4-pa1 +# Wed Feb 16 11:32:49 2005 +# +CONFIG_PARISC=y +CONFIG_MMU=y +CONFIG_STACK_GROWSUP=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +# CONFIG_PA7000 is not set +# CONFIG_PA7100LC is not set +# CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set +CONFIG_PA8X00=y +CONFIG_PA20=y +CONFIG_PREFETCH=y +CONFIG_64BIT=y +CONFIG_SMP=y +CONFIG_HOTPLUG_CPU=y +CONFIG_DISCONTIGMEM=y +# CONFIG_PREEMPT is not set +CONFIG_COMPAT=y +CONFIG_NR_CPUS=8 + +# +# Bus options (PCI, PCMCIA, EISA, GSC, ISA) +# +# CONFIG_GSC is not set +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y +CONFIG_PCI_LBA=y +CONFIG_IOSAPIC=y +CONFIG_IOMMU_SBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_PD6729=m +CONFIG_I82092=m +CONFIG_TCIC=m +CONFIG_PCCARD_NONSTATIC=m + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# PA-RISC specific drivers +# +# CONFIG_SUPERIO is not set +# CONFIG_CHASSIS_LCD_LED is not set +CONFIG_PDC_CHASSIS=y +CONFIG_PDC_STABLE=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +CONFIG_SCSI_QLOGIC_FC=m +# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set +CONFIG_SCSI_QLOGIC_1280=m +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +CONFIG_SCSI_DEBUG=m + +# +# PCMCIA SCSI adapter support +# +CONFIG_PCMCIA_FDOMAIN=m +CONFIG_PCMCIA_QLOGIC=m +CONFIG_PCMCIA_SYM53C500=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +CONFIG_FUSION=m +CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION_CTL=m + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_ETHERTAP is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=m +CONFIG_TYPHOON=m + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +CONFIG_PCMCIA_XIRCOM=m +# CONFIG_PCMCIA_XIRTULIP is not set +CONFIG_HP100=m +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=m +CONFIG_E100=m +CONFIG_E100_NAPI=y +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=m +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +CONFIG_EPIC100=m +# CONFIG_SUNDANCE is not set +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +CONFIG_ACENIC_OMIT_TIGON_I=y +CONFIG_DL2K=m +CONFIG_E1000=m +CONFIG_E1000_NAPI=y +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=m + +# +# Ethernet (10000 Mbit) +# +CONFIG_IXGB=m +CONFIG_IXGB_NAPI=y +CONFIG_S2IO=m +CONFIG_S2IO_NAPI=y +# CONFIG_2BUFF_MODE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +CONFIG_PCMCIA_NETWAVE=m + +# +# Wireless 802.11 Frequency Hopping cards support +# +CONFIG_PCMCIA_RAYCS=m + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_PCI_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_WL3501=m + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=m +CONFIG_PCMCIA_3C574=m +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +CONFIG_PCMCIA_SMC91C92=m +CONFIG_PCMCIA_XIRC2PS=m +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MUX is not set +CONFIG_PDC_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=160 +CONFIG_DUMMY_CONSOLE_ROWS=64 + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_SPKM3=m +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +CONFIG_NLS_CODEPAGE_863=m +# CONFIG_NLS_CODEPAGE_864 is not set +CONFIG_NLS_CODEPAGE_865=m +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_RWLOCK is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig new file mode 100644 index 000000000000..1700d7aec686 --- /dev/null +++ b/arch/parisc/configs/b180_defconfig @@ -0,0 +1,839 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-pa5 +# Wed Jan 5 13:35:54 2005 +# +CONFIG_PARISC=y +CONFIG_MMU=y +CONFIG_STACK_GROWSUP=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Processor type and features +# +# CONFIG_PA7000 is not set +CONFIG_PA7100LC=y +# CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set +# CONFIG_PA8X00 is not set +CONFIG_PA11=y +# CONFIG_64BIT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HPUX is not set + +# +# Bus options (PCI, PCMCIA, EISA, GSC, ISA) +# +CONFIG_GSC=y +# CONFIG_HPPB is not set +# CONFIG_IOMMU_CCIO is not set +CONFIG_GSC_LASI=y +CONFIG_GSC_WAX=y +CONFIG_EISA=y +CONFIG_EISA_NAMES=y +CONFIG_ISA=y +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y +CONFIG_GSC_DINO=y +# CONFIG_PCI_LBA is not set +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +CONFIG_PARPORT_PC_CML1=y +# CONFIG_PARPORT_SERIAL is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_NCR53C406A is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_MEM_MAPPED=y +CONFIG_53C700_LE_ON_BE=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_ZALON is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID5=y +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_LASI_82596 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +CONFIG_TULIP=y +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +# CONFIG_HP_SDC is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_HIL_OLD is not set +# CONFIG_KEYBOARD_HIL is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_HIL is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_HP_SDC_RTC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MUX is not set +# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_PRINTER=y +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_STI=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_MDA_CONSOLE is not set +CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=160 +CONFIG_DUMMY_CONSOLE_ROWS=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_PARISC_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_SECLVL is not set +# CONFIG_SECURITY_SELINUX is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig new file mode 100644 index 000000000000..b27980161c31 --- /dev/null +++ b/arch/parisc/configs/c3000_defconfig @@ -0,0 +1,1126 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-pa5 +# Wed Jan 5 13:26:49 2005 +# +CONFIG_PARISC=y +CONFIG_MMU=y +CONFIG_STACK_GROWSUP=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Processor type and features +# +# CONFIG_PA7000 is not set +# CONFIG_PA7100LC is not set +# CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set +CONFIG_PA8X00=y +CONFIG_PA20=y +CONFIG_PREFETCH=y +# CONFIG_PARISC64 is not set +# CONFIG_64BIT is not set +# CONFIG_SMP is not set +# CONFIG_DISCONTIGMEM is not set +# CONFIG_PREEMPT is not set +# CONFIG_HPUX is not set + +# +# Bus options (PCI, PCMCIA, EISA, GSC, ISA) +# +# CONFIG_GSC is not set +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y +CONFIG_PCI_LBA=y +CONFIG_IOSAPIC=y +CONFIG_IOMMU_SBA=y +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +CONFIG_BLK_DEV_UMEM=m +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +CONFIG_BLK_DEV_NS87415=y +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=m +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=m + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +CONFIG_SCSI_ATA_PIIX=m +# CONFIG_SCSI_SATA_NV is not set +CONFIG_SCSI_SATA_PROMISE=m +# CONFIG_SCSI_SATA_SX4 is not set +CONFIG_SCSI_SATA_SIL=m +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +CONFIG_SCSI_SATA_VIA=m +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +CONFIG_SCSI_QLOGIC_FC=m +# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set +CONFIG_SCSI_QLOGIC_1280=m +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA6322=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +CONFIG_MD_MULTIPATH=y +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set + +# +# Fusion MPT device support +# +CONFIG_FUSION=m +CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION_CTL=m + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_COMPAT_IPCHAINS=m +CONFIG_IP_NF_COMPAT_IPFWADM=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_ETHERTAP is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +CONFIG_HAPPYMEAL=m +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +CONFIG_DE2104X=m +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_AMD8111_ETH is not set +CONFIG_ADAPTEC_STARFIRE=m +# CONFIG_ADAPTEC_STARFIRE_NAPI is not set +CONFIG_B44=m +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=m +# CONFIG_EEPRO100_PIO is not set +CONFIG_E100=m +# CONFIG_E100_NAPI is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=m +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=m + +# +# Ethernet (10000 Mbit) +# +CONFIG_IXGB=y +CONFIG_IXGB_NAPI=y +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MUX is not set +# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_STI=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=160 +CONFIG_DUMMY_CONSOLE_ROWS=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_PARISC_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_MIDI is not set +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_RW_DETECT is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +CONFIG_USB_KBTAB=m +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_HPUSBSCSI=m + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_RT is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig new file mode 100644 index 000000000000..ebd6301aa599 --- /dev/null +++ b/arch/parisc/defconfig @@ -0,0 +1,926 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_PARISC=y +CONFIG_MMU=y +CONFIG_STACK_GROWSUP=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_STANDALONE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_HOTPLUG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor type and features +# +CONFIG_PA7000=y +# CONFIG_PA7100LC is not set +# CONFIG_PA7200 is not set +# CONFIG_PA8X00 is not set +CONFIG_PA11=y +# CONFIG_64BIT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HPUX is not set + +# +# Bus options (PCI, PCMCIA, EISA, GSC, ISA) +# +CONFIG_GSC=y +CONFIG_HPPB=y +CONFIG_IOMMU_CCIO=y +CONFIG_GSC_LASI=y +CONFIG_GSC_WAX=y +CONFIG_EISA=y +CONFIG_EISA_NAMES=y +# CONFIG_ISA is not set +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +CONFIG_PCI_NAMES=y +CONFIG_GSC_DINO=y +CONFIG_PCI_LBA=y +CONFIG_IOSAPIC=y +CONFIG_IOMMU_SBA=y +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +CONFIG_PDC_CHASSIS=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +CONFIG_PARPORT_PC_CML1=y +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_REPORT_LUNS is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_MEM_MAPPED=y +CONFIG_53C700_LE_ON_BE=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_ZALON=y +CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 +CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 +CONFIG_SCSI_NCR53C8XX_SYNC=20 +# CONFIG_SCSI_NCR53C8XX_PROFILE is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID5=y +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_IPV6 is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IPV6_SCTP__=y +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_LASI_82596=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_LNE390 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NE3210 is not set +# CONFIG_ES3210 is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +CONFIG_DL2K=y +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_AIRO=y +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +CONFIG_NET_WIRELESS=y + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# Bluetooth support +# +# CONFIG_BT is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_PCIPS2 is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL=y +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_HIL is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_DB9 is not set +# CONFIG_JOYSTICK_GAMECON is not set +# CONFIG_JOYSTICK_TURBOGRAFX is not set +# CONFIG_INPUT_JOYDUMP is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_HP_SDC_RTC=y + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_MULTIPORT is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MUX is not set +# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_PRINTER=y +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_QIC02_TAPE is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_STI=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_MDA_CONSOLE is not set +CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=160 +CONFIG_DUMMY_CONSOLE_ROWS=64 +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_PCI_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_SOUND_HARMONY is not set + +# +# USB support +# +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_UHCI_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_MIDI is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_STORAGE is not set + +# +# USB Human Interface Devices (HID) +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_XPAD is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network adaptors +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_FAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_GSS is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_RWLOCK is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_INFO is not set + +# +# Security options +# +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Library routines +# +CONFIG_CRC32=y diff --git a/arch/parisc/defpalo.conf b/arch/parisc/defpalo.conf new file mode 100644 index 000000000000..4e1ae25b08d1 --- /dev/null +++ b/arch/parisc/defpalo.conf @@ -0,0 +1,21 @@ +# This a generic Palo configuration file. For more information about how +# it works try 'palo -?'. +# +# Most people using 'make palo' want a bootable file, usable for +# network or tape booting for example. +--init-tape=lifimage +--recoverykernel=vmlinux + +########## Pick your ROOT here! ########## +# You need at least one 'root='! +# +# If you want a root ramdisk, use the next 2 lines +# (Edit the ramdisk image name!!!!) +--ramdisk=ram-disk-image-file +--commandline=0/vmlinux HOME=/ root=/dev/ram initrd=0/ramdisk + +# If you want NFS root, use the following command line (Edit the HOSTNAME!!!) +#--commandline=0/vmlinux HOME=/ root=/dev/nfs nfsroot=HOSTNAME ip=bootp + +# If you have root on a disk partition, use this (Edit the partition name!!!) +#--commandline=0/vmlinux HOME=/ root=/dev/sda1 diff --git a/arch/parisc/hpux/Makefile b/arch/parisc/hpux/Makefile new file mode 100644 index 000000000000..1048fb69f06d --- /dev/null +++ b/arch/parisc/hpux/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HPUX emulation +# + +obj-y := entry_hpux.o gate.o wrappers.o fs.o ioctl.o sys_hpux.o diff --git a/arch/parisc/hpux/entry_hpux.S b/arch/parisc/hpux/entry_hpux.S new file mode 100644 index 000000000000..fa9bf38787e7 --- /dev/null +++ b/arch/parisc/hpux/entry_hpux.S @@ -0,0 +1,547 @@ +/* syscall table for HPUX specific syscalls + * + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * Copyright (C) 1999 Matthew Wilcox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + + .text + +#define ENTRY_NAME(_name_) .word _name_ + + .align 4 + .export hpux_call_table + .import hpux_unimplemented_wrapper +hpux_call_table: + ENTRY_NAME(sys_ni_syscall) /* 0 */ + ENTRY_NAME(sys_exit) + ENTRY_NAME(hpux_fork_wrapper) + ENTRY_NAME(sys_read) + ENTRY_NAME(sys_write) + ENTRY_NAME(sys_open) /* 5 */ + ENTRY_NAME(sys_close) + ENTRY_NAME(hpux_wait) + ENTRY_NAME(sys_creat) + ENTRY_NAME(sys_link) + ENTRY_NAME(sys_unlink) /* 10 */ + ENTRY_NAME(hpux_execv_wrapper) + ENTRY_NAME(sys_chdir) + ENTRY_NAME(sys_time) + ENTRY_NAME(sys_mknod) + ENTRY_NAME(sys_chmod) /* 15 */ + ENTRY_NAME(sys_chown) + ENTRY_NAME(hpux_brk) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_lseek) + ENTRY_NAME(sys_getpid) /* 20 */ + ENTRY_NAME(hpux_mount) + ENTRY_NAME(sys_oldumount) + ENTRY_NAME(sys_setuid) + ENTRY_NAME(sys_getuid) + ENTRY_NAME(sys_stime) /* 25 */ + ENTRY_NAME(hpux_ptrace) + ENTRY_NAME(sys_alarm) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_pause) + ENTRY_NAME(sys_utime) /* 30 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_access) + ENTRY_NAME(hpux_nice) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 35 */ + ENTRY_NAME(sys_sync) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_newstat) + ENTRY_NAME(hpux_setpgrp3) + ENTRY_NAME(sys_newlstat) /* 40 */ + ENTRY_NAME(sys_dup) + ENTRY_NAME(hpux_pipe_wrapper) + ENTRY_NAME(sys_times) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 45 */ + ENTRY_NAME(sys_setgid) + ENTRY_NAME(sys_getgid) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 50 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_ioctl) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 55 */ + ENTRY_NAME(sys_symlink) + ENTRY_NAME(hpux_utssys) + ENTRY_NAME(sys_readlink) + ENTRY_NAME(hpux_execve_wrapper) + ENTRY_NAME(sys_umask) /* 60 */ + ENTRY_NAME(sys_chroot) + ENTRY_NAME(sys_fcntl) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 65 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_sbrk) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 70 */ + ENTRY_NAME(sys_mmap) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 75 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 80 */ + ENTRY_NAME(sys_getpgid) + ENTRY_NAME(sys_setpgid) + ENTRY_NAME(sys_setitimer) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 85 */ + ENTRY_NAME(sys_getitimer) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_dup2) /* 90 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_newfstat) + ENTRY_NAME(sys_select) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 95 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 100 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 105 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 110 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 115 */ + ENTRY_NAME(sys_gettimeofday) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 120 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_fchown) + ENTRY_NAME(sys_fchmod) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 125 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_rename) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 130 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_sysconf) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 135 */ + ENTRY_NAME(sys_mkdir) + ENTRY_NAME(sys_rmdir) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 140 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_getrlimit) + ENTRY_NAME(sys_setrlimit) /* 145 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 150 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_lockf) /* 155 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 160 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 165 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 170 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 175 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 180 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_sigprocmask) /* 185 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 190 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_getdomainname) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 195 */ + ENTRY_NAME(hpux_statfs) + ENTRY_NAME(hpux_fstatfs) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_waitpid) /* 200 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 205 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 210 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 215 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 220 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 225 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 230 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 235 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 240 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 245 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 250 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 255 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 260 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 265 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 270 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_fchdir) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_accept) /* 275 */ + ENTRY_NAME(sys_bind) + ENTRY_NAME(sys_connect) + ENTRY_NAME(sys_getpeername) + ENTRY_NAME(sys_getsockname) + ENTRY_NAME(sys_getsockopt) /* 280 */ + ENTRY_NAME(sys_listen) + ENTRY_NAME(sys_recv) + ENTRY_NAME(sys_recvfrom) + ENTRY_NAME(sys_recvmsg) + ENTRY_NAME(sys_send) /* 285 */ + ENTRY_NAME(sys_sendmsg) + ENTRY_NAME(sys_sendto) + ENTRY_NAME(sys_setsockopt) + ENTRY_NAME(sys_shutdown) + ENTRY_NAME(sys_socket) /* 290 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 295 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 300 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 305 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 310 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 315 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 320 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 325 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 330 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_lchown) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_sysfs) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 335 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 340 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 345 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 350 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(sys_nanosleep) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 355 */ + ENTRY_NAME(hpux_getdents) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 360 */ + ENTRY_NAME(hpux_fstat64) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 365 */ + ENTRY_NAME(hpux_lstat64) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_stat64) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 370 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 375 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 380 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_setpgrp) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 385 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 390 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 395 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 400 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 405 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 410 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 415 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 420 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 425 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 430 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 435 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 440 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 445 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 450 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 455 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 460 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 465 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 470 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 475 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 480 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 485 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 490 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 495 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 500 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 505 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) /* 510 */ + ENTRY_NAME(hpux_unimplemented_wrapper) + ENTRY_NAME(hpux_unimplemented_wrapper) +.end + diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c new file mode 100644 index 000000000000..d7c80edf4489 --- /dev/null +++ b/arch/parisc/hpux/fs.c @@ -0,0 +1,199 @@ +/* + * Implements HPUX syscalls. + * + * Copyright (C) 1999 Matthew Wilcox + * Copyright (C) 2000 Michael Ang + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000 Philipp Rumpf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int hpux_execve(struct pt_regs *regs) +{ + int error; + char *filename; + + filename = getname((char *) regs->gr[26]); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, (char **) regs->gr[25], + (char **)regs->gr[24], regs); + + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); + +out: + return error; +} + +struct hpux_dirent { + loff_t d_off; + ino_t d_ino; + short d_reclen; + short d_namlen; + char d_name[1]; +}; + +struct getdents_callback { + struct hpux_dirent *current_dir; + struct hpux_dirent *previous; + int count; + int error; +}; + +#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de))) +#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1)) + +static int filldir(void * __buf, const char * name, int namlen, loff_t offset, + ino_t ino, unsigned d_type) +{ + struct hpux_dirent * dirent; + struct getdents_callback * buf = (struct getdents_callback *) __buf; + int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1); + + buf->error = -EINVAL; /* only used if we fail.. */ + if (reclen > buf->count) + return -EINVAL; + dirent = buf->previous; + if (dirent) + put_user(offset, &dirent->d_off); + dirent = buf->current_dir; + buf->previous = dirent; + put_user(ino, &dirent->d_ino); + put_user(reclen, &dirent->d_reclen); + put_user(namlen, &dirent->d_namlen); + copy_to_user(dirent->d_name, name, namlen); + put_user(0, dirent->d_name + namlen); + ((char *) dirent) += reclen; + buf->current_dir = dirent; + buf->count -= reclen; + return 0; +} + +#undef NAME_OFFSET +#undef ROUND_UP + +int hpux_getdents(unsigned int fd, struct hpux_dirent *dirent, unsigned int count) +{ + struct file * file; + struct hpux_dirent * lastdirent; + struct getdents_callback buf; + int error = -EBADF; + + file = fget(fd); + if (!file) + goto out; + + buf.current_dir = dirent; + buf.previous = NULL; + buf.count = count; + buf.error = 0; + + error = vfs_readdir(file, filldir, &buf); + if (error < 0) + goto out_putf; + error = buf.error; + lastdirent = buf.previous; + if (lastdirent) { + put_user(file->f_pos, &lastdirent->d_off); + error = count - buf.count; + } + +out_putf: + fput(file); +out: + return error; +} + +int hpux_mount(const char *fs, const char *path, int mflag, + const char *fstype, const char *dataptr, int datalen) +{ + return -ENOSYS; +} + +static int cp_hpux_stat(struct kstat *stat, struct hpux_stat64 *statbuf) +{ + struct hpux_stat64 tmp; + + /* we probably want a different split here - is hpux 12:20? */ + + if (!new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev)) + return -EOVERFLOW; + + memset(&tmp, 0, sizeof(tmp)); + tmp.st_dev = new_encode_dev(stat->dev); + tmp.st_ino = stat->ino; + tmp.st_mode = stat->mode; + tmp.st_nlink = stat->nlink; + tmp.st_uid = stat->uid; + tmp.st_gid = stat->gid; + tmp.st_rdev = new_encode_dev(stat->rdev); + tmp.st_size = stat->size; + tmp.st_atime = stat->atime.tv_sec; + tmp.st_mtime = stat->mtime.tv_sec; + tmp.st_ctime = stat->ctime.tv_sec; + tmp.st_blocks = stat->blocks; + tmp.st_blksize = stat->blksize; + return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0; +} + +long hpux_stat64(char *filename, struct hpux_stat64 *statbuf) +{ + struct kstat stat; + int error = vfs_stat(filename, &stat); + + if (!error) + error = cp_hpux_stat(&stat, statbuf); + + return error; +} + +long hpux_fstat64(unsigned int fd, struct hpux_stat64 *statbuf) +{ + struct kstat stat; + int error = vfs_fstat(fd, &stat); + + if (!error) + error = cp_hpux_stat(&stat, statbuf); + + return error; +} + +long hpux_lstat64(char *filename, struct hpux_stat64 *statbuf) +{ + struct kstat stat; + int error = vfs_lstat(filename, &stat); + + if (!error) + error = cp_hpux_stat(&stat, statbuf); + + return error; +} diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S new file mode 100644 index 000000000000..2680a1c0fa77 --- /dev/null +++ b/arch/parisc/hpux/gate.S @@ -0,0 +1,116 @@ +/* + * + * Linux/PARISC Project (http://www.parisc-linux.org/) + * + * System call entry code Copyright (c) Matthew Wilcox 1999 + * Licensed under the GNU GPL. + * thanks to Philipp Rumpf, Mike Shaver and various others + * sorry about the wall, puffin.. + */ + +#include +#include +#include +#include + +#ifdef __LP64__ + .level 2.0w +#else + .level 1.1 +#endif + .text + +#ifdef __LP64__ +#define FRAME_SIZE 128 +#else +#define FRAME_SIZE 64 +#endif + .import hpux_call_table + .import hpux_syscall_exit,code + .export hpux_gateway_page + + .align 4096 +hpux_gateway_page: + nop +#ifdef __LP64__ +#warning NEEDS WORK for 64-bit +#endif + ldw -64(%r30), %r29 ;! 8th argument + ldw -60(%r30), %r19 ;! 7th argument + ldw -56(%r30), %r20 ;! 6th argument + ldw -52(%r30), %r21 ;! 5th argument + gate .+8, %r0 /* become privileged */ + mtsp %r0,%sr4 /* get kernel space into sr4 */ + mtsp %r0,%sr5 /* get kernel space into sr5 */ + mtsp %r0,%sr6 /* get kernel space into sr6 */ + mfsp %sr7,%r1 /* save user sr7 */ + mtsp %r1,%sr3 /* and store it in sr3 */ + + mtctl %r30,%cr28 + mfctl %cr30,%r1 + xor %r1,%r30,%r30 /* ye olde xor trick */ + xor %r1,%r30,%r1 + xor %r1,%r30,%r30 + ldo TASK_SZ_ALGN+FRAME_SIZE(%r30),%r30 /* set up kernel stack */ + + /* N.B.: It is critical that we don't set sr7 to 0 until r30 + * contains a valid kernel stack pointer. It is also + * critical that we don't start using the kernel stack + * until after sr7 has been set to 0. + */ + + mtsp %r0,%sr7 /* get kernel space into sr7 */ + STREG %r1,TASK_PT_GR30-TASK_SZ_ALGN-FRAME_SIZE(%r30) /* save usp */ + ldo -TASK_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr in %r1 */ + + /* Save some registers for sigcontext and potential task + switch (see entry.S for the details of which ones are + saved/restored). TASK_PT_PSW is zeroed so we can see whether + a process is on a syscall or not. For an interrupt the real + PSW value is stored. This is needed for gdb and sys_ptrace. */ + STREG %r0, TASK_PT_PSW(%r1) + STREG %r2, TASK_PT_GR2(%r1) /* preserve rp */ + STREG %r19, TASK_PT_GR19(%r1) /* 7th argument */ + STREG %r20, TASK_PT_GR20(%r1) /* 6th argument */ + STREG %r21, TASK_PT_GR21(%r1) /* 5th argument */ + STREG %r22, TASK_PT_GR22(%r1) /* syscall # */ + STREG %r23, TASK_PT_GR23(%r1) /* 4th argument */ + STREG %r24, TASK_PT_GR24(%r1) /* 3rd argument */ + STREG %r25, TASK_PT_GR25(%r1) /* 2nd argument */ + STREG %r26, TASK_PT_GR26(%r1) /* 1st argument */ + STREG %r27, TASK_PT_GR27(%r1) /* user dp */ + STREG %r28, TASK_PT_GR28(%r1) /* return value 0 */ + STREG %r28, TASK_PT_ORIG_R28(%r1) /* return value 0 (saved for signals) */ + STREG %r29, TASK_PT_GR29(%r1) /* 8th argument */ + STREG %r31, TASK_PT_GR31(%r1) /* preserve syscall return ptr */ + + ldo TASK_PT_FR0(%r1), %r27 /* save fpregs from the kernel */ + save_fp %r27 /* or potential task switch */ + + mfctl %cr11, %r27 /* i.e. SAR */ + STREG %r27, TASK_PT_SAR(%r1) + + loadgp + + stw %r21, -52(%r30) ;! 5th argument + stw %r20, -56(%r30) ;! 6th argument + stw %r19, -60(%r30) ;! 7th argument + stw %r29, -64(%r30) ;! 8th argument + + ldil L%hpux_call_table, %r21 + ldo R%hpux_call_table(%r21), %r21 + comiclr,>>= __NR_HPUX_syscalls, %r22, %r0 + b,n syscall_nosys + ldwx,s %r22(%r21), %r21 + ldil L%hpux_syscall_exit,%r2 + be 0(%sr7,%r21) + ldo R%hpux_syscall_exit(%r2),%r2 + +syscall_nosys: + ldil L%hpux_syscall_exit,%r1 + be R%hpux_syscall_exit(%sr7,%r1) + ldo -ENOSYS(%r0),%r28 + + .align 4096 + .export end_hpux_gateway_page +end_hpux_gateway_page: diff --git a/arch/parisc/hpux/ioctl.c b/arch/parisc/hpux/ioctl.c new file mode 100644 index 000000000000..b34b4f3c60ec --- /dev/null +++ b/arch/parisc/hpux/ioctl.c @@ -0,0 +1,73 @@ +/* + * Implements some necessary HPUX ioctls. + * + * Copyright (C) 1999-2002 Matthew Wilcox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Supported ioctls: + * TCGETA + * TCSETA + * TCSETAW + * TCSETAF + * TCSBRK + * TCXONC + * TCFLSH + * TIOCGWINSZ + * TIOCSWINSZ + * TIOCGPGRP + * TIOCSPGRP + */ + +#include +#include +#include +#include +#include +#include +#include + +static int hpux_ioctl_t(int fd, unsigned long cmd, unsigned long arg) +{ + int result = -EOPNOTSUPP; + int nr = _IOC_NR(cmd); + switch (nr) { + case 106: + result = sys_ioctl(fd, TIOCSWINSZ, arg); + break; + case 107: + result = sys_ioctl(fd, TIOCGWINSZ, arg); + break; + } + return result; +} + +int hpux_ioctl(int fd, unsigned long cmd, unsigned long arg) +{ + int result = -EOPNOTSUPP; + int type = _IOC_TYPE(cmd); + switch (type) { + case 'T': + /* Our structures are now compatible with HPUX's */ + result = sys_ioctl(fd, cmd, arg); + break; + case 't': + result = hpux_ioctl_t(fd, cmd, arg); + break; + } + return result; +} diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c new file mode 100644 index 000000000000..a64fd48fbfb5 --- /dev/null +++ b/arch/parisc/hpux/sys_hpux.c @@ -0,0 +1,985 @@ +/* + * Implements HPUX syscalls. + * + * Copyright (C) 1999 Matthew Wilcox + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000 Michael Ang + * Copyright (C) 2001 Nathan Neulinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +unsigned long hpux_brk(unsigned long addr) +{ + /* Sigh. Looks like HP/UX libc relies on kernel bugs. */ + return sys_brk(addr + PAGE_SIZE); +} + +int hpux_sbrk(void) +{ + return -ENOSYS; +} + +/* Random other syscalls */ + +int hpux_nice(int priority_change) +{ + return -ENOSYS; +} + +int hpux_ptrace(void) +{ + return -ENOSYS; +} + +int hpux_wait(int *stat_loc) +{ + return sys_waitpid(-1, stat_loc, 0); +} + +int hpux_setpgrp(void) +{ + return sys_setpgid(0,0); +} + +int hpux_setpgrp3(void) +{ + return hpux_setpgrp(); +} + +#define _SC_CPU_VERSION 10001 +#define _SC_OPEN_MAX 4 +#define CPU_PA_RISC1_1 0x210 + +int hpux_sysconf(int which) +{ + switch (which) { + case _SC_CPU_VERSION: + return CPU_PA_RISC1_1; + case _SC_OPEN_MAX: + return INT_MAX; + default: + return -EINVAL; + } +} + +/*****************************************************************************/ + +#define HPUX_UTSLEN 9 +#define HPUX_SNLEN 15 + +struct hpux_utsname { + char sysname[HPUX_UTSLEN]; + char nodename[HPUX_UTSLEN]; + char release[HPUX_UTSLEN]; + char version[HPUX_UTSLEN]; + char machine[HPUX_UTSLEN]; + char idnumber[HPUX_SNLEN]; +} ; + +struct hpux_ustat { + int32_t f_tfree; /* total free (daddr_t) */ + u_int32_t f_tinode; /* total inodes free (ino_t) */ + char f_fname[6]; /* filsys name */ + char f_fpack[6]; /* filsys pack name */ + u_int32_t f_blksize; /* filsys block size (int) */ +}; + +/* + * HPUX's utssys() call. It's a collection of miscellaneous functions, + * alas, so there's no nice way of splitting them up. + */ + +/* This function is called from hpux_utssys(); HP-UX implements + * ustat() as an option to utssys(). + * + * Now, struct ustat on HP-UX is exactly the same as on Linux, except + * that it contains one addition field on the end, int32_t f_blksize. + * So, we could have written this function to just call the Linux + * sys_ustat(), (defined in linux/fs/super.c), and then just + * added this additional field to the user's structure. But I figure + * if we're gonna be digging through filesystem structures to get + * this, we might as well just do the whole enchilada all in one go. + * + * So, most of this function is almost identical to sys_ustat(). + * I have placed comments at the few lines changed or added, to + * aid in porting forward if and when sys_ustat() is changed from + * its form in kernel 2.2.5. + */ +static int hpux_ustat(dev_t dev, struct hpux_ustat __user *ubuf) +{ + struct super_block *s; + struct hpux_ustat tmp; /* Changed to hpux_ustat */ + struct kstatfs sbuf; + int err = -EINVAL; + + s = user_get_super(dev); + if (s == NULL) + goto out; + err = vfs_statfs(s, &sbuf); + drop_super(s); + if (err) + goto out; + + memset(&tmp,0,sizeof(tmp)); + + tmp.f_tfree = (int32_t)sbuf.f_bfree; + tmp.f_tinode = (u_int32_t)sbuf.f_ffree; + tmp.f_blksize = (u_int32_t)sbuf.f_bsize; /* Added this line */ + + err = copy_to_user(ubuf, &tmp, sizeof(tmp)) ? -EFAULT : 0; +out: + return err; +} + +/* + * Wrapper for hpux statfs call. At the moment, just calls the linux native one + * and ignores the extra fields at the end of the hpux statfs struct. + * + */ + +typedef int32_t hpux_fsid_t[2]; /* file system ID type */ +typedef uint16_t hpux_site_t; + +struct hpux_statfs { + int32_t f_type; /* type of info, zero for now */ + int32_t f_bsize; /* fundamental file system block size */ + int32_t f_blocks; /* total blocks in file system */ + int32_t f_bfree; /* free block in fs */ + int32_t f_bavail; /* free blocks avail to non-superuser */ + int32_t f_files; /* total file nodes in file system */ + int32_t f_ffree; /* free file nodes in fs */ + hpux_fsid_t f_fsid; /* file system ID */ + int32_t f_magic; /* file system magic number */ + int32_t f_featurebits; /* file system features */ + int32_t f_spare[4]; /* spare for later */ + hpux_site_t f_cnode; /* cluster node where mounted */ + int16_t f_pad; +}; + +static int vfs_statfs_hpux(struct super_block *sb, struct hpux_statfs *buf) +{ + struct kstatfs st; + int retval; + + retval = vfs_statfs(sb, &st); + if (retval) + return retval; + + memset(buf, 0, sizeof(*buf)); + buf->f_type = st.f_type; + buf->f_bsize = st.f_bsize; + buf->f_blocks = st.f_blocks; + buf->f_bfree = st.f_bfree; + buf->f_bavail = st.f_bavail; + buf->f_files = st.f_files; + buf->f_ffree = st.f_ffree; + buf->f_fsid[0] = st.f_fsid.val[0]; + buf->f_fsid[1] = st.f_fsid.val[1]; + + return 0; +} + +/* hpux statfs */ +asmlinkage long hpux_statfs(const char __user *path, + struct hpux_statfs __user *buf) +{ + struct nameidata nd; + int error; + + error = user_path_walk(path, &nd); + if (!error) { + struct hpux_statfs tmp; + error = vfs_statfs_hpux(nd.dentry->d_inode->i_sb, &tmp); + if (!error && copy_to_user(buf, &tmp, sizeof(tmp))) + error = -EFAULT; + path_release(&nd); + } + return error; +} + +asmlinkage long hpux_fstatfs(unsigned int fd, struct hpux_statfs __user * buf) +{ + struct file *file; + struct hpux_statfs tmp; + int error; + + error = -EBADF; + file = fget(fd); + if (!file) + goto out; + error = vfs_statfs_hpux(file->f_dentry->d_inode->i_sb, &tmp); + if (!error && copy_to_user(buf, &tmp, sizeof(tmp))) + error = -EFAULT; + fput(file); + out: + return error; +} + + +/* This function is called from hpux_utssys(); HP-UX implements + * uname() as an option to utssys(). + * + * The form of this function is pretty much copied from sys_olduname(), + * defined in linux/arch/i386/kernel/sys_i386.c. + */ +/* TODO: Are these put_user calls OK? Should they pass an int? + * (I copied it from sys_i386.c like this.) + */ +static int hpux_uname(struct hpux_utsname *name) +{ + int error; + + if (!name) + return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct hpux_utsname))) + return -EFAULT; + + down_read(&uts_sem); + + error = __copy_to_user(&name->sysname,&system_utsname.sysname,HPUX_UTSLEN-1); + error |= __put_user(0,name->sysname+HPUX_UTSLEN-1); + error |= __copy_to_user(&name->nodename,&system_utsname.nodename,HPUX_UTSLEN-1); + error |= __put_user(0,name->nodename+HPUX_UTSLEN-1); + error |= __copy_to_user(&name->release,&system_utsname.release,HPUX_UTSLEN-1); + error |= __put_user(0,name->release+HPUX_UTSLEN-1); + error |= __copy_to_user(&name->version,&system_utsname.version,HPUX_UTSLEN-1); + error |= __put_user(0,name->version+HPUX_UTSLEN-1); + error |= __copy_to_user(&name->machine,&system_utsname.machine,HPUX_UTSLEN-1); + error |= __put_user(0,name->machine+HPUX_UTSLEN-1); + + up_read(&uts_sem); + + /* HP-UX utsname has no domainname field. */ + + /* TODO: Implement idnumber!!! */ +#if 0 + error |= __put_user(0,name->idnumber); + error |= __put_user(0,name->idnumber+HPUX_SNLEN-1); +#endif + + error = error ? -EFAULT : 0; + + return error; +} + +/* Note: HP-UX just uses the old suser() function to check perms + * in this system call. We'll use capable(CAP_SYS_ADMIN). + */ +int hpux_utssys(char *ubuf, int n, int type) +{ + int len; + int error; + switch( type ) { + case 0: + /* uname(): */ + return( hpux_uname( (struct hpux_utsname *)ubuf ) ); + break ; + case 1: + /* Obsolete (used to be umask().) */ + return -EFAULT ; + break ; + case 2: + /* ustat(): */ + return( hpux_ustat(new_decode_dev(n), (struct hpux_ustat *)ubuf) ); + break ; + case 3: + /* setuname(): + * + * On linux (unlike HP-UX), utsname.nodename + * is the same as the hostname. + * + * sys_sethostname() is defined in linux/kernel/sys.c. + */ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + /* Unlike Linux, HP-UX returns an error if n==0: */ + if ( n <= 0 ) + return -EINVAL ; + /* Unlike Linux, HP-UX truncates it if n is too big: */ + len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ; + return( sys_sethostname(ubuf, len) ); + break ; + case 4: + /* sethostname(): + * + * sys_sethostname() is defined in linux/kernel/sys.c. + */ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + /* Unlike Linux, HP-UX returns an error if n==0: */ + if ( n <= 0 ) + return -EINVAL ; + /* Unlike Linux, HP-UX truncates it if n is too big: */ + len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ; + return( sys_sethostname(ubuf, len) ); + break ; + case 5: + /* gethostname(): + * + * sys_gethostname() is defined in linux/kernel/sys.c. + */ + /* Unlike Linux, HP-UX returns an error if n==0: */ + if ( n <= 0 ) + return -EINVAL ; + return( sys_gethostname(ubuf, n) ); + break ; + case 6: + /* Supposedly called from setuname() in libc. + * TODO: When and why is this called? + * Is it ever even called? + * + * This code should look a lot like sys_sethostname(), + * defined in linux/kernel/sys.c. If that gets updated, + * update this code similarly. + */ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + /* Unlike Linux, HP-UX returns an error if n==0: */ + if ( n <= 0 ) + return -EINVAL ; + /* Unlike Linux, HP-UX truncates it if n is too big: */ + len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ; + /**/ + /* TODO: print a warning about using this? */ + down_write(&uts_sem); + error = -EFAULT; + if (!copy_from_user(system_utsname.sysname, ubuf, len)) { + system_utsname.sysname[len] = 0; + error = 0; + } + up_write(&uts_sem); + return error; + break ; + case 7: + /* Sets utsname.release, if you're allowed. + * Undocumented. Used by swinstall to change the + * OS version, during OS updates. Yuck!!! + * + * This code should look a lot like sys_sethostname() + * in linux/kernel/sys.c. If that gets updated, update + * this code similarly. + */ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + /* Unlike Linux, HP-UX returns an error if n==0: */ + if ( n <= 0 ) + return -EINVAL ; + /* Unlike Linux, HP-UX truncates it if n is too big: */ + len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ; + /**/ + /* TODO: print a warning about this? */ + down_write(&uts_sem); + error = -EFAULT; + if (!copy_from_user(system_utsname.release, ubuf, len)) { + system_utsname.release[len] = 0; + error = 0; + } + up_write(&uts_sem); + return error; + break ; + default: + /* This system call returns -EFAULT if given an unknown type. + * Why not -EINVAL? I don't know, it's just not what they did. + */ + return -EFAULT ; + } +} + +int hpux_getdomainname(char *name, int len) +{ + int nlen; + int err = -EFAULT; + + down_read(&uts_sem); + + nlen = strlen(system_utsname.domainname) + 1; + + if (nlen < len) + len = nlen; + if(len > __NEW_UTS_LEN) + goto done; + if(copy_to_user(name, system_utsname.domainname, len)) + goto done; + err = 0; +done: + up_read(&uts_sem); + return err; + +} + +int hpux_pipe(int *kstack_fildes) +{ + int error; + + lock_kernel(); + error = do_pipe(kstack_fildes); + unlock_kernel(); + return error; +} + +/* lies - says it works, but it really didn't lock anything */ +int hpux_lockf(int fildes, int function, off_t size) +{ + return 0; +} + +int hpux_sysfs(int opcode, unsigned long arg1, unsigned long arg2) +{ + char *fsname = NULL; + int len = 0; + int fstype; + +/*Unimplemented HP-UX syscall emulation. Syscall #334 (sysfs) + Args: 1 80057bf4 0 400179f0 0 0 0 */ + printk(KERN_DEBUG "in hpux_sysfs\n"); + printk(KERN_DEBUG "hpux_sysfs called with opcode = %d\n", opcode); + printk(KERN_DEBUG "hpux_sysfs called with arg1='%lx'\n", arg1); + + if ( opcode == 1 ) { /* GETFSIND */ + len = strlen_user((char *)arg1); + printk(KERN_DEBUG "len of arg1 = %d\n", len); + + fsname = (char *) kmalloc(len+1, GFP_KERNEL); + if ( !fsname ) { + printk(KERN_DEBUG "failed to kmalloc fsname\n"); + return 0; + } + + if ( copy_from_user(fsname, (char *)arg1, len+1) ) { + printk(KERN_DEBUG "failed to copy_from_user fsname\n"); + kfree(fsname); + return 0; + } + + printk(KERN_DEBUG "that is '%s' as (char *)\n", fsname); + if ( !strcmp(fsname, "hfs") ) { + fstype = 0; + } else { + fstype = 0; + }; + + kfree(fsname); + + printk(KERN_DEBUG "returning fstype=%d\n", fstype); + return fstype; /* something other than default */ + } + + + return 0; +} + + +/* Table of syscall names and handle for unimplemented routines */ +static const char *syscall_names[] = { + "nosys", /* 0 */ + "exit", + "fork", + "read", + "write", + "open", /* 5 */ + "close", + "wait", + "creat", + "link", + "unlink", /* 10 */ + "execv", + "chdir", + "time", + "mknod", + "chmod", /* 15 */ + "chown", + "brk", + "lchmod", + "lseek", + "getpid", /* 20 */ + "mount", + "umount", + "setuid", + "getuid", + "stime", /* 25 */ + "ptrace", + "alarm", + NULL, + "pause", + "utime", /* 30 */ + "stty", + "gtty", + "access", + "nice", + "ftime", /* 35 */ + "sync", + "kill", + "stat", + "setpgrp3", + "lstat", /* 40 */ + "dup", + "pipe", + "times", + "profil", + "ki_call", /* 45 */ + "setgid", + "getgid", + NULL, + NULL, + NULL, /* 50 */ + "acct", + "set_userthreadid", + NULL, + "ioctl", + "reboot", /* 55 */ + "symlink", + "utssys", + "readlink", + "execve", + "umask", /* 60 */ + "chroot", + "fcntl", + "ulimit", + NULL, + NULL, /* 65 */ + "vfork", + NULL, + NULL, + NULL, + NULL, /* 70 */ + "mmap", + NULL, + "munmap", + "mprotect", + "madvise", /* 75 */ + "vhangup", + "swapoff", + NULL, + "getgroups", + "setgroups", /* 80 */ + "getpgrp2", + "setpgid/setpgrp2", + "setitimer", + "wait3", + "swapon", /* 85 */ + "getitimer", + NULL, + NULL, + NULL, + "dup2", /* 90 */ + NULL, + "fstat", + "select", + NULL, + "fsync", /* 95 */ + "setpriority", + NULL, + NULL, + NULL, + "getpriority", /* 100 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 105 */ + NULL, + NULL, + "sigvector", + "sigblock", + "sigsetmask", /* 110 */ + "sigpause", + "sigstack", + NULL, + NULL, + NULL, /* 115 */ + "gettimeofday", + "getrusage", + NULL, + NULL, + "readv", /* 120 */ + "writev", + "settimeofday", + "fchown", + "fchmod", + NULL, /* 125 */ + "setresuid", + "setresgid", + "rename", + "truncate", + "ftruncate", /* 130 */ + NULL, + "sysconf", + NULL, + NULL, + NULL, /* 135 */ + "mkdir", + "rmdir", + NULL, + "sigcleanup", + "setcore", /* 140 */ + NULL, + "gethostid", + "sethostid", + "getrlimit", + "setrlimit", /* 145 */ + NULL, + NULL, + "quotactl", + "get_sysinfo", + NULL, /* 150 */ + "privgrp", + "rtprio", + "plock", + NULL, + "lockf", /* 155 */ + "semget", + NULL, + "semop", + "msgget", + NULL, /* 160 */ + "msgsnd", + "msgrcv", + "shmget", + NULL, + "shmat", /* 165 */ + "shmdt", + NULL, + "csp/nsp_init", + "cluster", + "mkrnod", /* 170 */ + "test", + "unsp_open", + NULL, + "getcontext", + "osetcontext", /* 175 */ + "bigio", + "pipenode", + "lsync", + "getmachineid", + "cnodeid/mysite", /* 180 */ + "cnodes/sitels", + "swapclients", + "rmtprocess", + "dskless_stats", + "sigprocmask", /* 185 */ + "sigpending", + "sigsuspend", + "sigaction", + NULL, + "nfssvc", /* 190 */ + "getfh", + "getdomainname", + "setdomainname", + "async_daemon", + "getdirentries", /* 195 */ + NULL, + NULL, + "vfsmount", + NULL, + "waitpid", /* 200 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 205 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 210 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 215 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 220 */ + NULL, + NULL, + NULL, + "sigsetreturn", + "sigsetstatemask", /* 225 */ + "bfactl", + "cs", + "cds", + NULL, + "pathconf", /* 230 */ + "fpathconf", + NULL, + NULL, + "nfs_fcntl", + "ogetacl", /* 235 */ + "ofgetacl", + "osetacl", + "ofsetacl", + "pstat", + "getaudid", /* 240 */ + "setaudid", + "getaudproc", + "setaudproc", + "getevent", + "setevent", /* 245 */ + "audwrite", + "audswitch", + "audctl", + "ogetaccess", + "fsctl", /* 250 */ + "ulconnect", + "ulcontrol", + "ulcreate", + "uldest", + "ulrecv", /* 255 */ + "ulrecvcn", + "ulsend", + "ulshutdown", + "swapfs", + "fss", /* 260 */ + NULL, + NULL, + NULL, + NULL, + NULL, /* 265 */ + NULL, + "tsync", + "getnumfds", + "poll", + "getmsg", /* 270 */ + "putmsg", + "fchdir", + "getmount_cnt", + "getmount_entry", + "accept", /* 275 */ + "bind", + "connect", + "getpeername", + "getsockname", + "getsockopt", /* 280 */ + "listen", + "recv", + "recvfrom", + "recvmsg", + "send", /* 285 */ + "sendmsg", + "sendto", + "setsockopt", + "shutdown", + "socket", /* 290 */ + "socketpair", + "proc_open", + "proc_close", + "proc_send", + "proc_recv", /* 295 */ + "proc_sendrecv", + "proc_syscall", + "ipccreate", + "ipcname", + "ipcnamerase", /* 300 */ + "ipclookup", + "ipcselect", + "ipcconnect", + "ipcrecvcn", + "ipcsend", /* 305 */ + "ipcrecv", + "ipcgetnodename", + "ipcsetnodename", + "ipccontrol", + "ipcshutdown", /* 310 */ + "ipcdest", + "semctl", + "msgctl", + "shmctl", + "mpctl", /* 315 */ + "exportfs", + "getpmsg", + "putpmsg", + "strioctl", + "msync", /* 320 */ + "msleep", + "mwakeup", + "msem_init", + "msem_remove", + "adjtime", /* 325 */ + "kload", + "fattach", + "fdetach", + "serialize", + "statvfs", /* 330 */ + "fstatvfs", + "lchown", + "getsid", + "sysfs", + NULL, /* 335 */ + NULL, + "sched_setparam", + "sched_getparam", + "sched_setscheduler", + "sched_getscheduler", /* 340 */ + "sched_yield", + "sched_get_priority_max", + "sched_get_priority_min", + "sched_rr_get_interval", + "clock_settime", /* 345 */ + "clock_gettime", + "clock_getres", + "timer_create", + "timer_delete", + "timer_settime", /* 350 */ + "timer_gettime", + "timer_getoverrun", + "nanosleep", + "toolbox", + NULL, /* 355 */ + "getdents", + "getcontext", + "sysinfo", + "fcntl64", + "ftruncate64", /* 360 */ + "fstat64", + "getdirentries64", + "getrlimit64", + "lockf64", + "lseek64", /* 365 */ + "lstat64", + "mmap64", + "setrlimit64", + "stat64", + "truncate64", /* 370 */ + "ulimit64", + NULL, + NULL, + NULL, + NULL, /* 375 */ + NULL, + NULL, + NULL, + NULL, + "setcontext", /* 380 */ + "sigaltstack", + "waitid", + "setpgrp", + "recvmsg2", + "sendmsg2", /* 385 */ + "socket2", + "socketpair2", + "setregid", + "lwp_create", + "lwp_terminate", /* 390 */ + "lwp_wait", + "lwp_suspend", + "lwp_resume", + "lwp_self", + "lwp_abort_syscall", /* 395 */ + "lwp_info", + "lwp_kill", + "ksleep", + "kwakeup", + "ksleep_abort", /* 400 */ + "lwp_proc_info", + "lwp_exit", + "lwp_continue", + "getacl", + "fgetacl", /* 405 */ + "setacl", + "fsetacl", + "getaccess", + "lwp_mutex_init", + "lwp_mutex_lock_sys", /* 410 */ + "lwp_mutex_unlock", + "lwp_cond_init", + "lwp_cond_signal", + "lwp_cond_broadcast", + "lwp_cond_wait_sys", /* 415 */ + "lwp_getscheduler", + "lwp_setscheduler", + "lwp_getprivate", + "lwp_setprivate", + "lwp_detach", /* 420 */ + "mlock", + "munlock", + "mlockall", + "munlockall", + "shm_open", /* 425 */ + "shm_unlink", + "sigqueue", + "sigwaitinfo", + "sigtimedwait", + "sigwait", /* 430 */ + "aio_read", + "aio_write", + "lio_listio", + "aio_error", + "aio_return", /* 435 */ + "aio_cancel", + "aio_suspend", + "aio_fsync", + "mq_open", + "mq_unlink", /* 440 */ + "mq_send", + "mq_receive", + "mq_notify", + "mq_setattr", + "mq_getattr", /* 445 */ + "ksem_open", + "ksem_unlink", + "ksem_close", + "ksem_destroy", + "lw_sem_incr", /* 450 */ + "lw_sem_decr", + "lw_sem_read", + "mq_close", +}; +static const int syscall_names_max = 453; + +int +hpux_unimplemented(unsigned long arg1,unsigned long arg2,unsigned long arg3, + unsigned long arg4,unsigned long arg5,unsigned long arg6, + unsigned long arg7,unsigned long sc_num) +{ + /* NOTE: sc_num trashes arg8 for the few syscalls that actually + * have a valid 8th argument. + */ + const char *name = NULL; + if ( sc_num <= syscall_names_max && sc_num >= 0 ) { + name = syscall_names[sc_num]; + } + + if ( name ) { + printk(KERN_DEBUG "Unimplemented HP-UX syscall emulation. Syscall #%lu (%s)\n", + sc_num, name); + } else { + printk(KERN_DEBUG "Unimplemented unknown HP-UX syscall emulation. Syscall #%lu\n", + sc_num); + } + + printk(KERN_DEBUG " Args: %lx %lx %lx %lx %lx %lx %lx\n", + arg1, arg2, arg3, arg4, arg5, arg6, arg7); + + return -ENOSYS; +} diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S new file mode 100644 index 000000000000..1aa936dfe147 --- /dev/null +++ b/arch/parisc/hpux/wrappers.S @@ -0,0 +1,257 @@ +/* + * Linux/PARISC Project (http://www.parisc-linux.org/) + * + * HP-UX System Call Wrapper routines and System Call Return Path + * + * Copyright (C) 2000 Hewlett-Packard (John Marvin) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __LP64__ +#warning PA64 support needs more work...did first cut +#endif + +#include +#include +#include + +#ifdef __LP64__ + .level 2.0w +#else + .level 1.1 +#endif + .text + + /* These should probably go in a header file somewhere. + * They are duplicated in kernel/wrappers.S + * Possibly we should consider consolidating these + * register save/restore macros. + */ + .macro reg_save regs +#ifdef __LP64__ +#warning NEEDS WORK for 64-bit +#endif + STREG %r3, PT_GR3(\regs) + STREG %r4, PT_GR4(\regs) + STREG %r5, PT_GR5(\regs) + STREG %r6, PT_GR6(\regs) + STREG %r7, PT_GR7(\regs) + STREG %r8, PT_GR8(\regs) + STREG %r9, PT_GR9(\regs) + STREG %r10,PT_GR10(\regs) + STREG %r11,PT_GR11(\regs) + STREG %r12,PT_GR12(\regs) + STREG %r13,PT_GR13(\regs) + STREG %r14,PT_GR14(\regs) + STREG %r15,PT_GR15(\regs) + STREG %r16,PT_GR16(\regs) + STREG %r17,PT_GR17(\regs) + STREG %r18,PT_GR18(\regs) + .endm + + .macro reg_restore regs + LDREG PT_GR3(\regs), %r3 + LDREG PT_GR4(\regs), %r4 + LDREG PT_GR5(\regs), %r5 + LDREG PT_GR6(\regs), %r6 + LDREG PT_GR7(\regs), %r7 + LDREG PT_GR8(\regs), %r8 + LDREG PT_GR9(\regs), %r9 + LDREG PT_GR10(\regs),%r10 + LDREG PT_GR11(\regs),%r11 + LDREG PT_GR12(\regs),%r12 + LDREG PT_GR13(\regs),%r13 + LDREG PT_GR14(\regs),%r14 + LDREG PT_GR15(\regs),%r15 + LDREG PT_GR16(\regs),%r16 + LDREG PT_GR17(\regs),%r17 + LDREG PT_GR18(\regs),%r18 + .endm + + + .export hpux_fork_wrapper + .export hpux_child_return + .import sys_fork + +hpux_fork_wrapper: + ldo TASK_REGS-TASK_SZ_ALGN-64(%r30),%r1 ;! get pt regs + ;! pointer in task + reg_save %r1 + + STREG %r2,-20(%r30) + ldo 64(%r30),%r30 + STREG %r2,PT_GR19(%r1) ;! save for child + STREG %r30,PT_GR21(%r1) ;! save for child + + LDREG PT_GR30(%r1),%r25 + mtctl %r25,%cr29 + copy %r1,%r24 + bl sys_clone,%r2 + ldi SIGCHLD,%r26 + + LDREG -84(%r30),%r2 +fork_return: + ldo -64(%r30),%r30 + ldo TASK_REGS-TASK_SZ_ALGN-64(%r30),%r1 ;! get pt regs + + reg_restore %r1 + + /* + * HP-UX wants pid (child gets parent pid, parent gets child pid) + * in r28 and a flag in r29 (r29 == 1 for child, 0 for parent). + * Linux fork returns 0 for child, pid for parent. Since HP-UX + * libc stub throws away parent pid and returns 0 for child, + * we'll just return 0 for parent pid now. Only applications + * that jump directly to the gateway page (not supported) will + * know the difference. We can fix this later if necessary. + */ + + ldo -1024(%r0),%r1 + comb,>>=,n %r28,%r1,fork_exit /* just let the syscall exit handle it */ + or,= %r28,%r0,%r0 + or,tr %r0,%r0,%r29 /* r28 <> 0, we are parent, set r29 to 0 */ + ldo 1(%r0),%r29 /* r28 == 0, we are child, set r29 to 1 */ + +fork_exit: + bv %r0(%r2) + nop + + /* Set the return value for the child */ + +hpux_child_return: +#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) + bl schedule_tail, %r2 + nop +#endif + + LDREG TASK_PT_GR19-TASK_SZ_ALGN-128(%r30),%r2 + b fork_return + copy %r0,%r28 + + .export hpux_execve_wrapper + .export hpux_execv_wrapper + .import hpux_execve + +hpux_execv_wrapper: + copy %r0,%r24 /* NULL environment */ + +hpux_execve_wrapper: + + ldo TASK_REGS-TASK_SZ_ALGN-64(%r30),%r1 ;! get pt regs + + /* + * Do we need to save/restore r3-r18 here? + * I don't think so. why would new thread need old + * threads registers? + */ + + /* Store arg0, arg1 and arg2 so that hpux_execve will find them */ + + STREG %r26,PT_GR26(%r1) + STREG %r25,PT_GR25(%r1) + STREG %r24,PT_GR24(%r1) + + STREG %r2,-20(%r30) + ldo 64(%r30),%r30 + bl hpux_execve,%r2 + copy %r1,%arg0 + + ldo -64(%r30),%r30 + LDREG -20(%r30),%r2 + + /* If exec succeeded we need to load the args */ + + ldo -1024(%r0),%r1 + comb,>>= %r28,%r1,exec_error + copy %r2,%r19 + ldo -TASK_SZ_ALGN-64(%r30),%r1 ;! get task ptr + LDREG TASK_PT_GR26(%r1),%r26 + LDREG TASK_PT_GR25(%r1),%r25 + LDREG TASK_PT_GR24(%r1),%r24 + LDREG TASK_PT_GR23(%r1),%r23 + copy %r0,%r2 /* Flag to syscall_exit not to clear args */ + +exec_error: + bv %r0(%r19) + nop + + .export hpux_pipe_wrapper + .import hpux_pipe + + /* HP-UX expects pipefd's returned in r28 & r29 */ + +hpux_pipe_wrapper: + STREG %r2,-20(%r30) + ldo 64(%r30),%r30 + bl hpux_pipe,%r2 + ldo -56(%r30),%r26 /* pass local array to hpux_pipe */ + + + ldo -1024(%r0),%r1 + comb,>>= %r28,%r1,pipe_exit /* let syscall exit handle it */ + LDREG -84(%r30),%r2 + + /* if success, load fd's from stack array */ + + LDREG -56(%r30),%r28 + LDREG -52(%r30),%r29 + +pipe_exit: + bv %r0(%r2) + ldo -64(%r30),%r30 + + .export hpux_syscall_exit + .import syscall_exit + +hpux_syscall_exit: + + /* + * + * HP-UX call return conventions: + * + * if error: + * r22 = 1 + * r28 = errno value + * r29 = secondary return value + * else + * r22 = 0 + * r28 = return value + * r29 = secondary return value + * + * For now, we'll just check to see if r28 is < (unsigned long)-1024 + * (to handle addresses > 2 Gb) and if so set r22 to zero. If not, + * we'll complement r28 and set r22 to 1. Wrappers will be + * needed for syscalls that care about the secondary return value. + * The wrapper may also need a way of avoiding the following code, + * but we'll deal with that when it becomes necessary. + */ + + ldo -1024(%r0),%r1 + comb,<< %r28,%r1,no_error + copy %r0,%r22 + subi 0,%r28,%r28 + ldo 1(%r0),%r22 + +no_error: + b syscall_exit + nop + + .export hpux_unimplemented_wrapper + .import hpux_unimplemented + +hpux_unimplemented_wrapper: + b hpux_unimplemented + STREG %r22,-64(%r30) /* overwrite arg8 with syscall number */ diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh new file mode 100644 index 000000000000..9632b3e164c7 --- /dev/null +++ b/arch/parisc/install.sh @@ -0,0 +1,38 @@ +#!/bin/sh +# +# arch/parisc/install.sh, derived from arch/i386/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# +# "make install" script for i386 architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +# User may have a custom install script + +if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi +if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi + +# Default install + +if [ -f $4/vmlinux ]; then + mv $4/vmlinux $4/vmlinux.old +fi + +if [ -f $4/System.map ]; then + mv $4/System.map $4/System.old +fi + +cat $2 > $4/vmlinux +cp $3 $4/System.map diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile new file mode 100644 index 000000000000..171f9c239f60 --- /dev/null +++ b/arch/parisc/kernel/Makefile @@ -0,0 +1,24 @@ +# +# Makefile for arch/parisc/kernel +# + +extra-y := init_task.o head.o vmlinux.lds + +AFLAGS_entry.o := -traditional +AFLAGS_pacache.o := -traditional +CFLAGS_ioctl32.o := -Ifs/ + +obj-y := cache.o pacache.o setup.o traps.o time.o irq.o \ + pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \ + ptrace.o hardware.o inventory.o drivers.o semaphore.o \ + signal.o hpmc.o real2.o parisc_ksyms.o unaligned.o \ + process.o processor.o pdc_cons.o pdc_chassis.o unwind.o \ + topology.o + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PA11) += pci-dma.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_64BIT) += binfmt_elf32.o sys_parisc32.o ioctl32.o signal32.o +# only supported for PCX-W/U in 64-bit mode at the moment +obj-$(CONFIG_64BIT) += perf.o perf_asm.o diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c new file mode 100644 index 000000000000..1ad44f92d6e4 --- /dev/null +++ b/arch/parisc/kernel/asm-offsets.c @@ -0,0 +1,299 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + * + * Copyright (C) 2000-2001 John Marvin + * Copyright (C) 2000 David Huggins-Daines + * Copyright (C) 2000 Sam Creasey + * Copyright (C) 2000 Grant Grundler + * Copyright (C) 2001 Paul Bame + * Copyright (C) 2001 Richard Hirst + * Copyright (C) 2002 Randolph Chung + * Copyright (C) 2003 James Bottomley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#ifdef __LP64__ +#define FRAME_SIZE 128 +#else +#define FRAME_SIZE 64 +#endif + +#define align(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y))) + +int main(void) +{ + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, thread_info)); + DEFINE(TASK_STATE, offsetof(struct task_struct, state)); + DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); + DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending)); + DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_PERSONALITY, offsetof(struct task_struct, personality)); + DEFINE(TASK_PID, offsetof(struct task_struct, pid)); + BLANK(); + DEFINE(TASK_REGS, offsetof(struct task_struct, thread.regs)); + DEFINE(TASK_PT_PSW, offsetof(struct task_struct, thread.regs.gr[ 0])); + DEFINE(TASK_PT_GR1, offsetof(struct task_struct, thread.regs.gr[ 1])); + DEFINE(TASK_PT_GR2, offsetof(struct task_struct, thread.regs.gr[ 2])); + DEFINE(TASK_PT_GR3, offsetof(struct task_struct, thread.regs.gr[ 3])); + DEFINE(TASK_PT_GR4, offsetof(struct task_struct, thread.regs.gr[ 4])); + DEFINE(TASK_PT_GR5, offsetof(struct task_struct, thread.regs.gr[ 5])); + DEFINE(TASK_PT_GR6, offsetof(struct task_struct, thread.regs.gr[ 6])); + DEFINE(TASK_PT_GR7, offsetof(struct task_struct, thread.regs.gr[ 7])); + DEFINE(TASK_PT_GR8, offsetof(struct task_struct, thread.regs.gr[ 8])); + DEFINE(TASK_PT_GR9, offsetof(struct task_struct, thread.regs.gr[ 9])); + DEFINE(TASK_PT_GR10, offsetof(struct task_struct, thread.regs.gr[10])); + DEFINE(TASK_PT_GR11, offsetof(struct task_struct, thread.regs.gr[11])); + DEFINE(TASK_PT_GR12, offsetof(struct task_struct, thread.regs.gr[12])); + DEFINE(TASK_PT_GR13, offsetof(struct task_struct, thread.regs.gr[13])); + DEFINE(TASK_PT_GR14, offsetof(struct task_struct, thread.regs.gr[14])); + DEFINE(TASK_PT_GR15, offsetof(struct task_struct, thread.regs.gr[15])); + DEFINE(TASK_PT_GR16, offsetof(struct task_struct, thread.regs.gr[16])); + DEFINE(TASK_PT_GR17, offsetof(struct task_struct, thread.regs.gr[17])); + DEFINE(TASK_PT_GR18, offsetof(struct task_struct, thread.regs.gr[18])); + DEFINE(TASK_PT_GR19, offsetof(struct task_struct, thread.regs.gr[19])); + DEFINE(TASK_PT_GR20, offsetof(struct task_struct, thread.regs.gr[20])); + DEFINE(TASK_PT_GR21, offsetof(struct task_struct, thread.regs.gr[21])); + DEFINE(TASK_PT_GR22, offsetof(struct task_struct, thread.regs.gr[22])); + DEFINE(TASK_PT_GR23, offsetof(struct task_struct, thread.regs.gr[23])); + DEFINE(TASK_PT_GR24, offsetof(struct task_struct, thread.regs.gr[24])); + DEFINE(TASK_PT_GR25, offsetof(struct task_struct, thread.regs.gr[25])); + DEFINE(TASK_PT_GR26, offsetof(struct task_struct, thread.regs.gr[26])); + DEFINE(TASK_PT_GR27, offsetof(struct task_struct, thread.regs.gr[27])); + DEFINE(TASK_PT_GR28, offsetof(struct task_struct, thread.regs.gr[28])); + DEFINE(TASK_PT_GR29, offsetof(struct task_struct, thread.regs.gr[29])); + DEFINE(TASK_PT_GR30, offsetof(struct task_struct, thread.regs.gr[30])); + DEFINE(TASK_PT_GR31, offsetof(struct task_struct, thread.regs.gr[31])); + DEFINE(TASK_PT_FR0, offsetof(struct task_struct, thread.regs.fr[ 0])); + DEFINE(TASK_PT_FR1, offsetof(struct task_struct, thread.regs.fr[ 1])); + DEFINE(TASK_PT_FR2, offsetof(struct task_struct, thread.regs.fr[ 2])); + DEFINE(TASK_PT_FR3, offsetof(struct task_struct, thread.regs.fr[ 3])); + DEFINE(TASK_PT_FR4, offsetof(struct task_struct, thread.regs.fr[ 4])); + DEFINE(TASK_PT_FR5, offsetof(struct task_struct, thread.regs.fr[ 5])); + DEFINE(TASK_PT_FR6, offsetof(struct task_struct, thread.regs.fr[ 6])); + DEFINE(TASK_PT_FR7, offsetof(struct task_struct, thread.regs.fr[ 7])); + DEFINE(TASK_PT_FR8, offsetof(struct task_struct, thread.regs.fr[ 8])); + DEFINE(TASK_PT_FR9, offsetof(struct task_struct, thread.regs.fr[ 9])); + DEFINE(TASK_PT_FR10, offsetof(struct task_struct, thread.regs.fr[10])); + DEFINE(TASK_PT_FR11, offsetof(struct task_struct, thread.regs.fr[11])); + DEFINE(TASK_PT_FR12, offsetof(struct task_struct, thread.regs.fr[12])); + DEFINE(TASK_PT_FR13, offsetof(struct task_struct, thread.regs.fr[13])); + DEFINE(TASK_PT_FR14, offsetof(struct task_struct, thread.regs.fr[14])); + DEFINE(TASK_PT_FR15, offsetof(struct task_struct, thread.regs.fr[15])); + DEFINE(TASK_PT_FR16, offsetof(struct task_struct, thread.regs.fr[16])); + DEFINE(TASK_PT_FR17, offsetof(struct task_struct, thread.regs.fr[17])); + DEFINE(TASK_PT_FR18, offsetof(struct task_struct, thread.regs.fr[18])); + DEFINE(TASK_PT_FR19, offsetof(struct task_struct, thread.regs.fr[19])); + DEFINE(TASK_PT_FR20, offsetof(struct task_struct, thread.regs.fr[20])); + DEFINE(TASK_PT_FR21, offsetof(struct task_struct, thread.regs.fr[21])); + DEFINE(TASK_PT_FR22, offsetof(struct task_struct, thread.regs.fr[22])); + DEFINE(TASK_PT_FR23, offsetof(struct task_struct, thread.regs.fr[23])); + DEFINE(TASK_PT_FR24, offsetof(struct task_struct, thread.regs.fr[24])); + DEFINE(TASK_PT_FR25, offsetof(struct task_struct, thread.regs.fr[25])); + DEFINE(TASK_PT_FR26, offsetof(struct task_struct, thread.regs.fr[26])); + DEFINE(TASK_PT_FR27, offsetof(struct task_struct, thread.regs.fr[27])); + DEFINE(TASK_PT_FR28, offsetof(struct task_struct, thread.regs.fr[28])); + DEFINE(TASK_PT_FR29, offsetof(struct task_struct, thread.regs.fr[29])); + DEFINE(TASK_PT_FR30, offsetof(struct task_struct, thread.regs.fr[30])); + DEFINE(TASK_PT_FR31, offsetof(struct task_struct, thread.regs.fr[31])); + DEFINE(TASK_PT_SR0, offsetof(struct task_struct, thread.regs.sr[ 0])); + DEFINE(TASK_PT_SR1, offsetof(struct task_struct, thread.regs.sr[ 1])); + DEFINE(TASK_PT_SR2, offsetof(struct task_struct, thread.regs.sr[ 2])); + DEFINE(TASK_PT_SR3, offsetof(struct task_struct, thread.regs.sr[ 3])); + DEFINE(TASK_PT_SR4, offsetof(struct task_struct, thread.regs.sr[ 4])); + DEFINE(TASK_PT_SR5, offsetof(struct task_struct, thread.regs.sr[ 5])); + DEFINE(TASK_PT_SR6, offsetof(struct task_struct, thread.regs.sr[ 6])); + DEFINE(TASK_PT_SR7, offsetof(struct task_struct, thread.regs.sr[ 7])); + DEFINE(TASK_PT_IASQ0, offsetof(struct task_struct, thread.regs.iasq[0])); + DEFINE(TASK_PT_IASQ1, offsetof(struct task_struct, thread.regs.iasq[1])); + DEFINE(TASK_PT_IAOQ0, offsetof(struct task_struct, thread.regs.iaoq[0])); + DEFINE(TASK_PT_IAOQ1, offsetof(struct task_struct, thread.regs.iaoq[1])); + DEFINE(TASK_PT_CR27, offsetof(struct task_struct, thread.regs.cr27)); + DEFINE(TASK_PT_ORIG_R28, offsetof(struct task_struct, thread.regs.orig_r28)); + DEFINE(TASK_PT_KSP, offsetof(struct task_struct, thread.regs.ksp)); + DEFINE(TASK_PT_KPC, offsetof(struct task_struct, thread.regs.kpc)); + DEFINE(TASK_PT_SAR, offsetof(struct task_struct, thread.regs.sar)); + DEFINE(TASK_PT_IIR, offsetof(struct task_struct, thread.regs.iir)); + DEFINE(TASK_PT_ISR, offsetof(struct task_struct, thread.regs.isr)); + DEFINE(TASK_PT_IOR, offsetof(struct task_struct, thread.regs.ior)); + BLANK(); + DEFINE(TASK_SZ, sizeof(struct task_struct)); + DEFINE(TASK_SZ_ALGN, align(sizeof(struct task_struct), 64)); + BLANK(); + DEFINE(PT_PSW, offsetof(struct pt_regs, gr[ 0])); + DEFINE(PT_GR1, offsetof(struct pt_regs, gr[ 1])); + DEFINE(PT_GR2, offsetof(struct pt_regs, gr[ 2])); + DEFINE(PT_GR3, offsetof(struct pt_regs, gr[ 3])); + DEFINE(PT_GR4, offsetof(struct pt_regs, gr[ 4])); + DEFINE(PT_GR5, offsetof(struct pt_regs, gr[ 5])); + DEFINE(PT_GR6, offsetof(struct pt_regs, gr[ 6])); + DEFINE(PT_GR7, offsetof(struct pt_regs, gr[ 7])); + DEFINE(PT_GR8, offsetof(struct pt_regs, gr[ 8])); + DEFINE(PT_GR9, offsetof(struct pt_regs, gr[ 9])); + DEFINE(PT_GR10, offsetof(struct pt_regs, gr[10])); + DEFINE(PT_GR11, offsetof(struct pt_regs, gr[11])); + DEFINE(PT_GR12, offsetof(struct pt_regs, gr[12])); + DEFINE(PT_GR13, offsetof(struct pt_regs, gr[13])); + DEFINE(PT_GR14, offsetof(struct pt_regs, gr[14])); + DEFINE(PT_GR15, offsetof(struct pt_regs, gr[15])); + DEFINE(PT_GR16, offsetof(struct pt_regs, gr[16])); + DEFINE(PT_GR17, offsetof(struct pt_regs, gr[17])); + DEFINE(PT_GR18, offsetof(struct pt_regs, gr[18])); + DEFINE(PT_GR19, offsetof(struct pt_regs, gr[19])); + DEFINE(PT_GR20, offsetof(struct pt_regs, gr[20])); + DEFINE(PT_GR21, offsetof(struct pt_regs, gr[21])); + DEFINE(PT_GR22, offsetof(struct pt_regs, gr[22])); + DEFINE(PT_GR23, offsetof(struct pt_regs, gr[23])); + DEFINE(PT_GR24, offsetof(struct pt_regs, gr[24])); + DEFINE(PT_GR25, offsetof(struct pt_regs, gr[25])); + DEFINE(PT_GR26, offsetof(struct pt_regs, gr[26])); + DEFINE(PT_GR27, offsetof(struct pt_regs, gr[27])); + DEFINE(PT_GR28, offsetof(struct pt_regs, gr[28])); + DEFINE(PT_GR29, offsetof(struct pt_regs, gr[29])); + DEFINE(PT_GR30, offsetof(struct pt_regs, gr[30])); + DEFINE(PT_GR31, offsetof(struct pt_regs, gr[31])); + DEFINE(PT_FR0, offsetof(struct pt_regs, fr[ 0])); + DEFINE(PT_FR1, offsetof(struct pt_regs, fr[ 1])); + DEFINE(PT_FR2, offsetof(struct pt_regs, fr[ 2])); + DEFINE(PT_FR3, offsetof(struct pt_regs, fr[ 3])); + DEFINE(PT_FR4, offsetof(struct pt_regs, fr[ 4])); + DEFINE(PT_FR5, offsetof(struct pt_regs, fr[ 5])); + DEFINE(PT_FR6, offsetof(struct pt_regs, fr[ 6])); + DEFINE(PT_FR7, offsetof(struct pt_regs, fr[ 7])); + DEFINE(PT_FR8, offsetof(struct pt_regs, fr[ 8])); + DEFINE(PT_FR9, offsetof(struct pt_regs, fr[ 9])); + DEFINE(PT_FR10, offsetof(struct pt_regs, fr[10])); + DEFINE(PT_FR11, offsetof(struct pt_regs, fr[11])); + DEFINE(PT_FR12, offsetof(struct pt_regs, fr[12])); + DEFINE(PT_FR13, offsetof(struct pt_regs, fr[13])); + DEFINE(PT_FR14, offsetof(struct pt_regs, fr[14])); + DEFINE(PT_FR15, offsetof(struct pt_regs, fr[15])); + DEFINE(PT_FR16, offsetof(struct pt_regs, fr[16])); + DEFINE(PT_FR17, offsetof(struct pt_regs, fr[17])); + DEFINE(PT_FR18, offsetof(struct pt_regs, fr[18])); + DEFINE(PT_FR19, offsetof(struct pt_regs, fr[19])); + DEFINE(PT_FR20, offsetof(struct pt_regs, fr[20])); + DEFINE(PT_FR21, offsetof(struct pt_regs, fr[21])); + DEFINE(PT_FR22, offsetof(struct pt_regs, fr[22])); + DEFINE(PT_FR23, offsetof(struct pt_regs, fr[23])); + DEFINE(PT_FR24, offsetof(struct pt_regs, fr[24])); + DEFINE(PT_FR25, offsetof(struct pt_regs, fr[25])); + DEFINE(PT_FR26, offsetof(struct pt_regs, fr[26])); + DEFINE(PT_FR27, offsetof(struct pt_regs, fr[27])); + DEFINE(PT_FR28, offsetof(struct pt_regs, fr[28])); + DEFINE(PT_FR29, offsetof(struct pt_regs, fr[29])); + DEFINE(PT_FR30, offsetof(struct pt_regs, fr[30])); + DEFINE(PT_FR31, offsetof(struct pt_regs, fr[31])); + DEFINE(PT_SR0, offsetof(struct pt_regs, sr[ 0])); + DEFINE(PT_SR1, offsetof(struct pt_regs, sr[ 1])); + DEFINE(PT_SR2, offsetof(struct pt_regs, sr[ 2])); + DEFINE(PT_SR3, offsetof(struct pt_regs, sr[ 3])); + DEFINE(PT_SR4, offsetof(struct pt_regs, sr[ 4])); + DEFINE(PT_SR5, offsetof(struct pt_regs, sr[ 5])); + DEFINE(PT_SR6, offsetof(struct pt_regs, sr[ 6])); + DEFINE(PT_SR7, offsetof(struct pt_regs, sr[ 7])); + DEFINE(PT_IASQ0, offsetof(struct pt_regs, iasq[0])); + DEFINE(PT_IASQ1, offsetof(struct pt_regs, iasq[1])); + DEFINE(PT_IAOQ0, offsetof(struct pt_regs, iaoq[0])); + DEFINE(PT_IAOQ1, offsetof(struct pt_regs, iaoq[1])); + DEFINE(PT_CR27, offsetof(struct pt_regs, cr27)); + DEFINE(PT_ORIG_R28, offsetof(struct pt_regs, orig_r28)); + DEFINE(PT_KSP, offsetof(struct pt_regs, ksp)); + DEFINE(PT_KPC, offsetof(struct pt_regs, kpc)); + DEFINE(PT_SAR, offsetof(struct pt_regs, sar)); + DEFINE(PT_IIR, offsetof(struct pt_regs, iir)); + DEFINE(PT_ISR, offsetof(struct pt_regs, isr)); + DEFINE(PT_IOR, offsetof(struct pt_regs, ior)); + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + DEFINE(PT_SZ_ALGN, align(sizeof(struct pt_regs), 64)); + BLANK(); + DEFINE(TI_TASK, offsetof(struct thread_info, task)); + DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); + DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit)); + DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); + DEFINE(THREAD_SZ, sizeof(struct thread_info)); + DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64)); + BLANK(); + DEFINE(IRQSTAT_SIRQ_PEND, offsetof(irq_cpustat_t, __softirq_pending)); + DEFINE(IRQSTAT_SZ, sizeof(irq_cpustat_t)); + BLANK(); + DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base)); + DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride)); + DEFINE(ICACHE_COUNT, offsetof(struct pdc_cache_info, ic_count)); + DEFINE(ICACHE_LOOP, offsetof(struct pdc_cache_info, ic_loop)); + DEFINE(DCACHE_BASE, offsetof(struct pdc_cache_info, dc_base)); + DEFINE(DCACHE_STRIDE, offsetof(struct pdc_cache_info, dc_stride)); + DEFINE(DCACHE_COUNT, offsetof(struct pdc_cache_info, dc_count)); + DEFINE(DCACHE_LOOP, offsetof(struct pdc_cache_info, dc_loop)); + DEFINE(ITLB_SID_BASE, offsetof(struct pdc_cache_info, it_sp_base)); + DEFINE(ITLB_SID_STRIDE, offsetof(struct pdc_cache_info, it_sp_stride)); + DEFINE(ITLB_SID_COUNT, offsetof(struct pdc_cache_info, it_sp_count)); + DEFINE(ITLB_OFF_BASE, offsetof(struct pdc_cache_info, it_off_base)); + DEFINE(ITLB_OFF_STRIDE, offsetof(struct pdc_cache_info, it_off_stride)); + DEFINE(ITLB_OFF_COUNT, offsetof(struct pdc_cache_info, it_off_count)); + DEFINE(ITLB_LOOP, offsetof(struct pdc_cache_info, it_loop)); + DEFINE(DTLB_SID_BASE, offsetof(struct pdc_cache_info, dt_sp_base)); + DEFINE(DTLB_SID_STRIDE, offsetof(struct pdc_cache_info, dt_sp_stride)); + DEFINE(DTLB_SID_COUNT, offsetof(struct pdc_cache_info, dt_sp_count)); + DEFINE(DTLB_OFF_BASE, offsetof(struct pdc_cache_info, dt_off_base)); + DEFINE(DTLB_OFF_STRIDE, offsetof(struct pdc_cache_info, dt_off_stride)); + DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count)); + DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop)); + BLANK(); + DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT); + DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT); + BLANK(); + DEFINE(ASM_PMD_SHIFT, PMD_SHIFT); + DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT); + DEFINE(ASM_BITS_PER_PGD, BITS_PER_PGD); + DEFINE(ASM_BITS_PER_PMD, BITS_PER_PMD); + DEFINE(ASM_BITS_PER_PTE, BITS_PER_PTE); + DEFINE(ASM_PGD_PMD_OFFSET, -(PAGE_SIZE << PGD_ORDER)); + DEFINE(ASM_PMD_ENTRY, ((PAGE_OFFSET & PMD_MASK) >> PMD_SHIFT)); + DEFINE(ASM_PGD_ENTRY, PAGE_OFFSET >> PGDIR_SHIFT); + DEFINE(ASM_PGD_ENTRY_SIZE, PGD_ENTRY_SIZE); + DEFINE(ASM_PMD_ENTRY_SIZE, PMD_ENTRY_SIZE); + DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE); + DEFINE(ASM_PT_INITIAL, PT_INITIAL); + DEFINE(ASM_PAGE_SIZE, PAGE_SIZE); + BLANK(); + DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip)); + DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space)); + DEFINE(EXCDATA_ADDR, offsetof(struct exception_data, fault_addr)); + return 0; +} diff --git a/arch/parisc/kernel/binfmt_elf32.c b/arch/parisc/kernel/binfmt_elf32.c new file mode 100644 index 000000000000..d1833f164bbe --- /dev/null +++ b/arch/parisc/kernel/binfmt_elf32.c @@ -0,0 +1,126 @@ +/* + * Support for 32-bit Linux/Parisc ELF binaries on 64 bit kernels + * + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000 Hewlett Packard Co. + * + * Heavily inspired from various other efforts to do the same thing + * (ia64,sparc64/mips64) + */ + +/* Make sure include/asm-parisc/elf.h does the right thing */ + +#define ELF_CLASS ELFCLASS32 + +#define ELF_CORE_COPY_REGS(dst, pt) \ + memset(dst, 0, sizeof(dst)); /* don't leak any "random" bits */ \ + { int i; \ + for (i = 0; i < 32; i++) dst[i] = (elf_greg_t) pt->gr[i]; \ + for (i = 0; i < 8; i++) dst[32 + i] = (elf_greg_t) pt->sr[i]; \ + } \ + dst[40] = (elf_greg_t) pt->iaoq[0]; dst[41] = (elf_greg_t) pt->iaoq[1]; \ + dst[42] = (elf_greg_t) pt->iasq[0]; dst[43] = (elf_greg_t) pt->iasq[1]; \ + dst[44] = (elf_greg_t) pt->sar; dst[45] = (elf_greg_t) pt->iir; \ + dst[46] = (elf_greg_t) pt->isr; dst[47] = (elf_greg_t) pt->ior; \ + dst[48] = (elf_greg_t) mfctl(22); dst[49] = (elf_greg_t) mfctl(0); \ + dst[50] = (elf_greg_t) mfctl(24); dst[51] = (elf_greg_t) mfctl(25); \ + dst[52] = (elf_greg_t) mfctl(26); dst[53] = (elf_greg_t) mfctl(27); \ + dst[54] = (elf_greg_t) mfctl(28); dst[55] = (elf_greg_t) mfctl(29); \ + dst[56] = (elf_greg_t) mfctl(30); dst[57] = (elf_greg_t) mfctl(31); \ + dst[58] = (elf_greg_t) mfctl( 8); dst[59] = (elf_greg_t) mfctl( 9); \ + dst[60] = (elf_greg_t) mfctl(12); dst[61] = (elf_greg_t) mfctl(13); \ + dst[62] = (elf_greg_t) mfctl(10); dst[63] = (elf_greg_t) mfctl(15); + + +typedef unsigned int elf_greg_t; + +#include +#include +#include +#include +#include /* struct compat_timeval */ + +#define elf_prstatus elf_prstatus32 +struct elf_prstatus32 +{ + struct elf_siginfo pr_info; /* Info associated with signal */ + short pr_cursig; /* Current signal */ + unsigned int pr_sigpend; /* Set of pending signals */ + unsigned int pr_sighold; /* Set of held signals */ + pid_t pr_pid; + pid_t pr_ppid; + pid_t pr_pgrp; + pid_t pr_sid; + struct compat_timeval pr_utime; /* User time */ + struct compat_timeval pr_stime; /* System time */ + struct compat_timeval pr_cutime; /* Cumulative user time */ + struct compat_timeval pr_cstime; /* Cumulative system time */ + elf_gregset_t pr_reg; /* GP registers */ + int pr_fpvalid; /* True if math co-processor being used. */ +}; + +#define elf_prpsinfo elf_prpsinfo32 +struct elf_prpsinfo32 +{ + char pr_state; /* numeric process state */ + char pr_sname; /* char for pr_state */ + char pr_zomb; /* zombie */ + char pr_nice; /* nice val */ + unsigned int pr_flag; /* flags */ + u16 pr_uid; + u16 pr_gid; + pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* filename of executable */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ +}; + +#define elf_addr_t unsigned int +#define init_elf_binfmt init_elf32_binfmt + +#define ELF_PLATFORM ("PARISC32\0") + +/* + * We should probably use this macro to set a flag somewhere to indicate + * this is a 32 on 64 process. We could use PER_LINUX_32BIT, or we + * could set a processor dependent flag in the thread_struct. + */ + +#define SET_PERSONALITY(ex, ibcs2) \ + current->personality = PER_LINUX32; \ + current->thread.map_base = DEFAULT_MAP_BASE32; \ + current->thread.task_size = DEFAULT_TASK_SIZE32 \ + +#undef cputime_to_timeval +#define cputime_to_timeval cputime_to_compat_timeval +static __inline__ void +cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) +{ + unsigned long jiffies = cputime_to_jiffies(cputime); + value->tv_usec = (jiffies % HZ) * (1000000L / HZ); + value->tv_sec = jiffies / HZ; +} + +#include "../../../fs/binfmt_elf.c" + +/* Set up a separate execution domain for ELF32 binaries running + * on an ELF64 kernel */ + +static struct exec_domain parisc32_exec_domain = { + .name = "Linux/ELF32", + .pers_low = PER_LINUX32, + .pers_high = PER_LINUX32, +}; + +static int __init parisc32_exec_init(void) +{ + /* steal the identity signal mappings from the default domain */ + parisc32_exec_domain.signal_map = default_exec_domain.signal_map; + parisc32_exec_domain.signal_invmap = default_exec_domain.signal_invmap; + + register_exec_domain(&parisc32_exec_domain); + + return 0; +} + +__initcall(parisc32_exec_init); diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c new file mode 100644 index 000000000000..f46a07a79218 --- /dev/null +++ b/arch/parisc/kernel/cache.c @@ -0,0 +1,366 @@ +/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $ + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 Helge Deller (07-13-1999) + * Copyright (C) 1999 SuSE GmbH Nuernberg + * Copyright (C) 2000 Philipp Rumpf (prumpf@tux.org) + * + * Cache and TLB management + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +int split_tlb; +int dcache_stride; +int icache_stride; +EXPORT_SYMBOL(dcache_stride); + + +#if defined(CONFIG_SMP) +/* On some machines (e.g. ones with the Merced bus), there can be + * only a single PxTLB broadcast at a time; this must be guaranteed + * by software. We put a spinlock around all TLB flushes to + * ensure this. + */ +DEFINE_SPINLOCK(pa_tlb_lock); +EXPORT_SYMBOL(pa_tlb_lock); +#endif + +struct pdc_cache_info cache_info; +#ifndef CONFIG_PA20 +static struct pdc_btlb_info btlb_info; +#endif + +#ifdef CONFIG_SMP +void +flush_data_cache(void) +{ + on_each_cpu((void (*)(void *))flush_data_cache_local, NULL, 1, 1); +} +void +flush_instruction_cache(void) +{ + on_each_cpu((void (*)(void *))flush_instruction_cache_local, NULL, 1, 1); +} +#endif + +void +flush_cache_all_local(void) +{ + flush_instruction_cache_local(); + flush_data_cache_local(); +} +EXPORT_SYMBOL(flush_cache_all_local); + +/* flushes EVERYTHING (tlb & cache) */ + +void +flush_all_caches(void) +{ + flush_cache_all(); + flush_tlb_all(); +} +EXPORT_SYMBOL(flush_all_caches); + +void +update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) +{ + struct page *page = pte_page(pte); + + if (pfn_valid(page_to_pfn(page)) && page_mapping(page) && + test_bit(PG_dcache_dirty, &page->flags)) { + + flush_kernel_dcache_page(page_address(page)); + clear_bit(PG_dcache_dirty, &page->flags); + } +} + +void +show_cache_info(struct seq_file *m) +{ + seq_printf(m, "I-cache\t\t: %ld KB\n", + cache_info.ic_size/1024 ); + seq_printf(m, "D-cache\t\t: %ld KB (%s%s, %d-way associative)\n", + cache_info.dc_size/1024, + (cache_info.dc_conf.cc_wt ? "WT":"WB"), + (cache_info.dc_conf.cc_sh ? ", shared I/D":""), + (cache_info.dc_conf.cc_assoc) + ); + + seq_printf(m, "ITLB entries\t: %ld\n" "DTLB entries\t: %ld%s\n", + cache_info.it_size, + cache_info.dt_size, + cache_info.dt_conf.tc_sh ? " - shared with ITLB":"" + ); + +#ifndef CONFIG_PA20 + /* BTLB - Block TLB */ + if (btlb_info.max_size==0) { + seq_printf(m, "BTLB\t\t: not supported\n" ); + } else { + seq_printf(m, + "BTLB fixed\t: max. %d pages, pagesize=%d (%dMB)\n" + "BTLB fix-entr.\t: %d instruction, %d data (%d combined)\n" + "BTLB var-entr.\t: %d instruction, %d data (%d combined)\n", + btlb_info.max_size, (int)4096, + btlb_info.max_size>>8, + btlb_info.fixed_range_info.num_i, + btlb_info.fixed_range_info.num_d, + btlb_info.fixed_range_info.num_comb, + btlb_info.variable_range_info.num_i, + btlb_info.variable_range_info.num_d, + btlb_info.variable_range_info.num_comb + ); + } +#endif +} + +void __init +parisc_cache_init(void) +{ + if (pdc_cache_info(&cache_info) < 0) + panic("parisc_cache_init: pdc_cache_info failed"); + +#if 0 + printk("ic_size %lx dc_size %lx it_size %lx\n", + cache_info.ic_size, + cache_info.dc_size, + cache_info.it_size); + + printk("DC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n", + cache_info.dc_base, + cache_info.dc_stride, + cache_info.dc_count, + cache_info.dc_loop); + + printk("dc_conf = 0x%lx alias %d blk %d line %d shift %d\n", + *(unsigned long *) (&cache_info.dc_conf), + cache_info.dc_conf.cc_alias, + cache_info.dc_conf.cc_block, + cache_info.dc_conf.cc_line, + cache_info.dc_conf.cc_shift); + printk(" wt %d sh %d cst %d assoc %d\n", + cache_info.dc_conf.cc_wt, + cache_info.dc_conf.cc_sh, + cache_info.dc_conf.cc_cst, + cache_info.dc_conf.cc_assoc); + + printk("IC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n", + cache_info.ic_base, + cache_info.ic_stride, + cache_info.ic_count, + cache_info.ic_loop); + + printk("ic_conf = 0x%lx alias %d blk %d line %d shift %d\n", + *(unsigned long *) (&cache_info.ic_conf), + cache_info.ic_conf.cc_alias, + cache_info.ic_conf.cc_block, + cache_info.ic_conf.cc_line, + cache_info.ic_conf.cc_shift); + printk(" wt %d sh %d cst %d assoc %d\n", + cache_info.ic_conf.cc_wt, + cache_info.ic_conf.cc_sh, + cache_info.ic_conf.cc_cst, + cache_info.ic_conf.cc_assoc); + + printk("D-TLB conf: sh %d page %d cst %d aid %d pad1 %d \n", + cache_info.dt_conf.tc_sh, + cache_info.dt_conf.tc_page, + cache_info.dt_conf.tc_cst, + cache_info.dt_conf.tc_aid, + cache_info.dt_conf.tc_pad1); + + printk("I-TLB conf: sh %d page %d cst %d aid %d pad1 %d \n", + cache_info.it_conf.tc_sh, + cache_info.it_conf.tc_page, + cache_info.it_conf.tc_cst, + cache_info.it_conf.tc_aid, + cache_info.it_conf.tc_pad1); +#endif + + split_tlb = 0; + if (cache_info.dt_conf.tc_sh == 0 || cache_info.dt_conf.tc_sh == 2) { + if (cache_info.dt_conf.tc_sh == 2) + printk(KERN_WARNING "Unexpected TLB configuration. " + "Will flush I/D separately (could be optimized).\n"); + + split_tlb = 1; + } + + /* "New and Improved" version from Jim Hull + * (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift)) + */ +#define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift)) + dcache_stride = CAFL_STRIDE(cache_info.dc_conf); + icache_stride = CAFL_STRIDE(cache_info.ic_conf); +#undef CAFL_STRIDE + +#ifndef CONFIG_PA20 + if (pdc_btlb_info(&btlb_info) < 0) { + memset(&btlb_info, 0, sizeof btlb_info); + } +#endif + + if ((boot_cpu_data.pdc.capabilities & PDC_MODEL_NVA_MASK) == + PDC_MODEL_NVA_UNSUPPORTED) { + printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n"); +#if 0 + panic("SMP kernel required to avoid non-equivalent aliasing"); +#endif + } +} + +void disable_sr_hashing(void) +{ + int srhash_type; + + switch (boot_cpu_data.cpu_type) { + case pcx: /* We shouldn't get this far. setup.c should prevent it. */ + BUG(); + return; + + case pcxs: + case pcxt: + case pcxt_: + srhash_type = SRHASH_PCXST; + break; + + case pcxl: + srhash_type = SRHASH_PCXL; + break; + + case pcxl2: /* pcxl2 doesn't support space register hashing */ + return; + + default: /* Currently all PA2.0 machines use the same ins. sequence */ + srhash_type = SRHASH_PA20; + break; + } + + disable_sr_hashing_asm(srhash_type); +} + +void flush_dcache_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + struct vm_area_struct *mpnt; + struct prio_tree_iter iter; + unsigned long offset; + unsigned long addr; + pgoff_t pgoff; + pte_t *pte; + unsigned long pfn = page_to_pfn(page); + + + if (mapping && !mapping_mapped(mapping)) { + set_bit(PG_dcache_dirty, &page->flags); + return; + } + + flush_kernel_dcache_page(page_address(page)); + + if (!mapping) + return; + + pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); + + /* We have carefully arranged in arch_get_unmapped_area() that + * *any* mappings of a file are always congruently mapped (whether + * declared as MAP_PRIVATE or MAP_SHARED), so we only need + * to flush one address here for them all to become coherent */ + + flush_dcache_mmap_lock(mapping); + vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) { + offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT; + addr = mpnt->vm_start + offset; + + /* Flush instructions produce non access tlb misses. + * On PA, we nullify these instructions rather than + * taking a page fault if the pte doesn't exist. + * This is just for speed. If the page translation + * isn't there, there's no point exciting the + * nadtlb handler into a nullification frenzy */ + + + if(!(pte = translation_exists(mpnt, addr))) + continue; + + /* make sure we really have this page: the private + * mappings may cover this area but have COW'd this + * particular page */ + if(pte_pfn(*pte) != pfn) + continue; + + __flush_cache_page(mpnt, addr); + + break; + } + flush_dcache_mmap_unlock(mapping); +} +EXPORT_SYMBOL(flush_dcache_page); + +/* Defined in arch/parisc/kernel/pacache.S */ +EXPORT_SYMBOL(flush_kernel_dcache_range_asm); +EXPORT_SYMBOL(flush_kernel_dcache_page); +EXPORT_SYMBOL(flush_data_cache_local); +EXPORT_SYMBOL(flush_kernel_icache_range_asm); + +void clear_user_page_asm(void *page, unsigned long vaddr) +{ + /* This function is implemented in assembly in pacache.S */ + extern void __clear_user_page_asm(void *page, unsigned long vaddr); + + purge_tlb_start(); + __clear_user_page_asm(page, vaddr); + purge_tlb_end(); +} + +#define FLUSH_THRESHOLD 0x80000 /* 0.5MB */ +int parisc_cache_flush_threshold = FLUSH_THRESHOLD; + +void parisc_setup_cache_timing(void) +{ + unsigned long rangetime, alltime; + extern char _text; /* start of kernel code, defined by linker */ + extern char _end; /* end of BSS, defined by linker */ + unsigned long size; + + alltime = mfctl(16); + flush_data_cache(); + alltime = mfctl(16) - alltime; + + size = (unsigned long)(&_end - _text); + rangetime = mfctl(16); + flush_kernel_dcache_range((unsigned long)&_text, size); + rangetime = mfctl(16) - rangetime; + + printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", + alltime, size, rangetime); + + /* Racy, but if we see an intermediate value, it's ok too... */ + parisc_cache_flush_threshold = size * alltime / rangetime; + + parisc_cache_flush_threshold = (parisc_cache_flush_threshold + L1_CACHE_BYTES - 1) &~ (L1_CACHE_BYTES - 1); + if (!parisc_cache_flush_threshold) + parisc_cache_flush_threshold = FLUSH_THRESHOLD; + + printk("Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus()); +} diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c new file mode 100644 index 000000000000..ebf186656afb --- /dev/null +++ b/arch/parisc/kernel/drivers.c @@ -0,0 +1,765 @@ +/* + * drivers.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (c) 1999 The Puffin Group + * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard + * Copyright (c) 2001 Helge Deller + * Copyright (c) 2001,2002 Ryan Bradetich + * Copyright (c) 2004-2005 Thibaut VARENE + * + * The file handles registering devices and drivers, then matching them. + * It's the closest we get to a dating agency. + * + * If you're thinking about modifying this file, here are some gotchas to + * bear in mind: + * - 715/Mirage device paths have a dummy device between Lasi and its children + * - The EISA adapter may show up as a sibling or child of Wax + * - Dino has an optionally functional serial port. If firmware enables it, + * it shows up as a child of Dino. If firmware disables it, the buswalk + * finds it and it shows up as a child of Cujo + * - Dino has both parisc and pci devices as children + * - parisc devices are discovered in a random order, including children + * before parents in some cases. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* See comments in include/asm-parisc/pci.h */ +struct hppa_dma_ops *hppa_dma_ops; +EXPORT_SYMBOL(hppa_dma_ops); + +static struct device root = { + .bus_id = "parisc", +}; + +#define for_each_padev(padev) \ + for (padev = next_dev(&root); padev != NULL; \ + padev = next_dev(&padev->dev)) + +#define check_dev(padev) \ + (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) + +/** + * next_dev - enumerates registered devices + * @dev: the previous device returned from next_dev + * + * next_dev does a depth-first search of the tree, returning parents + * before children. Returns NULL when there are no more devices. + */ +static struct parisc_device *next_dev(struct device *dev) +{ + if (!list_empty(&dev->children)) { + dev = list_to_dev(dev->children.next); + return check_dev(to_parisc_device(dev)); + } + + while (dev != &root) { + if (dev->node.next != &dev->parent->children) { + dev = list_to_dev(dev->node.next); + return to_parisc_device(dev); + } + dev = dev->parent; + } + + return NULL; +} + +/** + * match_device - Report whether this driver can handle this device + * @driver: the PA-RISC driver to try + * @dev: the PA-RISC device to try + */ +static int match_device(struct parisc_driver *driver, struct parisc_device *dev) +{ + const struct parisc_device_id *ids; + + for (ids = driver->id_table; ids->sversion; ids++) { + if ((ids->sversion != SVERSION_ANY_ID) && + (ids->sversion != dev->id.sversion)) + continue; + + if ((ids->hw_type != HWTYPE_ANY_ID) && + (ids->hw_type != dev->id.hw_type)) + continue; + + if ((ids->hversion != HVERSION_ANY_ID) && + (ids->hversion != dev->id.hversion)) + continue; + + return 1; + } + return 0; +} + +static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) +{ + dev->driver = driver; + request_mem_region(dev->hpa, 0x1000, driver->name); +} + +static int parisc_driver_probe(struct device *dev) +{ + int rc; + struct parisc_device *pa_dev = to_parisc_device(dev); + struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); + + rc = pa_drv->probe(pa_dev); + + if(!rc) + claim_device(pa_drv, pa_dev); + + return rc; +} + +static int parisc_driver_remove(struct device *dev) +{ + struct parisc_device *pa_dev = to_parisc_device(dev); + struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); + if (pa_drv->remove) + pa_drv->remove(pa_dev); + release_mem_region(pa_dev->hpa, 0x1000); + + return 0; +} + + +/** + * register_parisc_driver - Register this driver if it can handle a device + * @driver: the PA-RISC driver to try + */ +int register_parisc_driver(struct parisc_driver *driver) +{ + /* FIXME: we need this because apparently the sti + * driver can be registered twice */ + if(driver->drv.name) { + printk(KERN_WARNING + "BUG: skipping previously registered driver %s\n", + driver->name); + return 1; + } + + if (!driver->probe) { + printk(KERN_WARNING + "BUG: driver %s has no probe routine\n", + driver->name); + return 1; + } + + driver->drv.bus = &parisc_bus_type; + + /* We install our own probe and remove routines */ + WARN_ON(driver->drv.probe != NULL); + WARN_ON(driver->drv.remove != NULL); + + driver->drv.probe = parisc_driver_probe; + driver->drv.remove = parisc_driver_remove; + driver->drv.name = driver->name; + + return driver_register(&driver->drv); +} +EXPORT_SYMBOL(register_parisc_driver); + +/** + * count_parisc_driver - count # of devices this driver would match + * @driver: the PA-RISC driver to try + * + * Use by IOMMU support to "guess" the right size IOPdir. + * Formula is something like memsize/(num_iommu * entry_size). + */ +int count_parisc_driver(struct parisc_driver *driver) +{ + struct parisc_device *device; + int cnt = 0; + + for_each_padev(device) { + if (match_device(driver, device)) + cnt++; + } + + return cnt; +} + + + +/** + * unregister_parisc_driver - Unregister this driver from the list of drivers + * @driver: the PA-RISC driver to unregister + */ +int unregister_parisc_driver(struct parisc_driver *driver) +{ + driver_unregister(&driver->drv); + return 0; +} +EXPORT_SYMBOL(unregister_parisc_driver); + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct parisc_device *dev; + for_each_padev(dev) { + if (dev->hpa == hpa) + return dev; + } + return NULL; +} + +/** + * find_pa_parent_type - Find a parent of a specific type + * @dev: The device to start searching from + * @type: The device type to search for. + * + * Walks up the device tree looking for a device of the specified type. + * If it finds it, it returns it. If not, it returns NULL. + */ +const struct parisc_device * +find_pa_parent_type(const struct parisc_device *padev, int type) +{ + const struct device *dev = &padev->dev; + while (dev != &root) { + struct parisc_device *candidate = to_parisc_device(dev); + if (candidate->id.hw_type == type) + return candidate; + dev = dev->parent; + } + + return NULL; +} + +#ifdef CONFIG_PCI +static inline int is_pci_dev(struct device *dev) +{ + return dev->bus == &pci_bus_type; +} +#else +static inline int is_pci_dev(struct device *dev) +{ + return 0; +} +#endif + +/* + * get_node_path fills in @path with the firmware path to the device. + * Note that if @node is a parisc device, we don't fill in the 'mod' field. + * This is because both callers pass the parent and fill in the mod + * themselves. If @node is a PCI device, we do fill it in, even though this + * is inconsistent. + */ +static void get_node_path(struct device *dev, struct hardware_path *path) +{ + int i = 5; + memset(&path->bc, -1, 6); + + if (is_pci_dev(dev)) { + unsigned int devfn = to_pci_dev(dev)->devfn; + path->mod = PCI_FUNC(devfn); + path->bc[i--] = PCI_SLOT(devfn); + dev = dev->parent; + } + + while (dev != &root) { + if (is_pci_dev(dev)) { + unsigned int devfn = to_pci_dev(dev)->devfn; + path->bc[i--] = PCI_SLOT(devfn) | (PCI_FUNC(devfn)<< 5); + } else if (dev->bus == &parisc_bus_type) { + path->bc[i--] = to_parisc_device(dev)->hw_path; + } + dev = dev->parent; + } +} + +static char *print_hwpath(struct hardware_path *path, char *output) +{ + int i; + for (i = 0; i < 6; i++) { + if (path->bc[i] == -1) + continue; + output += sprintf(output, "%u/", (unsigned char) path->bc[i]); + } + output += sprintf(output, "%u", (unsigned char) path->mod); + return output; +} + +/** + * print_pa_hwpath - Returns hardware path for PA devices + * dev: The device to return the path for + * output: Pointer to a previously-allocated array to place the path in. + * + * This function fills in the output array with a human-readable path + * to a PA device. This string is compatible with that used by PDC, and + * may be printed on the outside of the box. + */ +char *print_pa_hwpath(struct parisc_device *dev, char *output) +{ + struct hardware_path path; + + get_node_path(dev->dev.parent, &path); + path.mod = dev->hw_path; + return print_hwpath(&path, output); +} +EXPORT_SYMBOL(print_pa_hwpath); + +#if defined(CONFIG_PCI) || defined(CONFIG_ISA) +/** + * get_pci_node_path - Determines the hardware path for a PCI device + * @pdev: The device to return the path for + * @path: Pointer to a previously-allocated array to place the path in. + * + * This function fills in the hardware_path structure with the route to + * the specified PCI device. This structure is suitable for passing to + * PDC calls. + */ +void get_pci_node_path(struct pci_dev *pdev, struct hardware_path *path) +{ + get_node_path(&pdev->dev, path); +} +EXPORT_SYMBOL(get_pci_node_path); + +/** + * print_pci_hwpath - Returns hardware path for PCI devices + * dev: The device to return the path for + * output: Pointer to a previously-allocated array to place the path in. + * + * This function fills in the output array with a human-readable path + * to a PCI device. This string is compatible with that used by PDC, and + * may be printed on the outside of the box. + */ +char *print_pci_hwpath(struct pci_dev *dev, char *output) +{ + struct hardware_path path; + + get_pci_node_path(dev, &path); + return print_hwpath(&path, output); +} +EXPORT_SYMBOL(print_pci_hwpath); + +#endif /* defined(CONFIG_PCI) || defined(CONFIG_ISA) */ + +static void setup_bus_id(struct parisc_device *padev) +{ + struct hardware_path path; + char *output = padev->dev.bus_id; + int i; + + get_node_path(padev->dev.parent, &path); + + for (i = 0; i < 6; i++) { + if (path.bc[i] == -1) + continue; + output += sprintf(output, "%u:", (unsigned char) path.bc[i]); + } + sprintf(output, "%u", (unsigned char) padev->hw_path); +} + +struct parisc_device * create_tree_node(char id, struct device *parent) +{ + struct parisc_device *dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + memset(dev, 0, sizeof(*dev)); + dev->hw_path = id; + dev->id.hw_type = HPHW_FAULTY; + + dev->dev.parent = parent; + setup_bus_id(dev); + + dev->dev.bus = &parisc_bus_type; + dev->dma_mask = 0xffffffffUL; /* PARISC devices are 32-bit */ + + /* make the generic dma mask a pointer to the parisc one */ + dev->dev.dma_mask = &dev->dma_mask; + dev->dev.coherent_dma_mask = dev->dma_mask; + device_register(&dev->dev); + + return dev; +} + +/** + * alloc_tree_node - returns a device entry in the iotree + * @parent: the parent node in the tree + * @id: the element of the module path for this entry + * + * Checks all the children of @parent for a matching @id. If none + * found, it allocates a new device and returns it. + */ +static struct parisc_device * alloc_tree_node(struct device *parent, char id) +{ + struct device *dev; + + list_for_each_entry(dev, &parent->children, node) { + struct parisc_device *padev = to_parisc_device(dev); + if (padev->hw_path == id) + return padev; + } + + return create_tree_node(id, parent); +} + +static struct parisc_device *create_parisc_device(struct hardware_path *modpath) +{ + int i; + struct device *parent = &root; + for (i = 0; i < 6; i++) { + if (modpath->bc[i] == -1) + continue; + parent = &alloc_tree_node(parent, modpath->bc[i])->dev; + } + return alloc_tree_node(parent, modpath->mod); +} + +struct parisc_device * +alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) +{ + int status; + unsigned long bytecnt; + u8 iodc_data[32]; + struct parisc_device *dev; + const char *name; + + /* Check to make sure this device has not already been added - Ryan */ + if (find_device_by_addr(hpa) != NULL) + return NULL; + + status = pdc_iodc_read(&bytecnt, hpa, 0, &iodc_data, 32); + if (status != PDC_OK) + return NULL; + + dev = create_parisc_device(mod_path); + if (dev->id.hw_type != HPHW_FAULTY) { + char p[64]; + print_pa_hwpath(dev, p); + printk("Two devices have hardware path %s. Please file a bug with HP.\n" + "In the meantime, you could try rearranging your cards.\n", p); + return NULL; + } + + dev->id.hw_type = iodc_data[3] & 0x1f; + dev->id.hversion = (iodc_data[0] << 4) | ((iodc_data[1] & 0xf0) >> 4); + dev->id.hversion_rev = iodc_data[1] & 0x0f; + dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | + (iodc_data[5] << 8) | iodc_data[6]; + dev->hpa = hpa; + name = parisc_hardware_description(&dev->id); + if (name) { + strlcpy(dev->name, name, sizeof(dev->name)); + } + + return dev; +} + +static int parisc_generic_match(struct device *dev, struct device_driver *drv) +{ + return match_device(to_parisc_driver(drv), to_parisc_device(dev)); +} + +#define pa_dev_attr(name, field, format_string) \ +static ssize_t name##_show(struct device *dev, char *buf) \ +{ \ + struct parisc_device *padev = to_parisc_device(dev); \ + return sprintf(buf, format_string, padev->field); \ +} + +#define pa_dev_attr_id(field, format) pa_dev_attr(field, id.field, format) + +pa_dev_attr(irq, irq, "%u\n"); +pa_dev_attr_id(hw_type, "0x%02x\n"); +pa_dev_attr(rev, id.hversion_rev, "0x%x\n"); +pa_dev_attr_id(hversion, "0x%03x\n"); +pa_dev_attr_id(sversion, "0x%05x\n"); + +static struct device_attribute parisc_device_attrs[] = { + __ATTR_RO(irq), + __ATTR_RO(hw_type), + __ATTR_RO(rev), + __ATTR_RO(hversion), + __ATTR_RO(sversion), + __ATTR_NULL, +}; + +struct bus_type parisc_bus_type = { + .name = "parisc", + .match = parisc_generic_match, + .dev_attrs = parisc_device_attrs, +}; + +/** + * register_parisc_device - Locate a driver to manage this device. + * @dev: The parisc device. + * + * Search the driver list for a driver that is willing to manage + * this device. + */ +int register_parisc_device(struct parisc_device *dev) +{ + if (!dev) + return 0; + + if (dev->driver) + return 1; + + return 0; +} + +/** + * match_pci_device - Matches a pci device against a given hardware path + * entry. + * @dev: the generic device (known to be contained by a pci_dev). + * @index: the current BC index + * @modpath: the hardware path. + * @return: true if the device matches the hardware path. + */ +static int match_pci_device(struct device *dev, int index, + struct hardware_path *modpath) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int id; + + if (index == 5) { + /* we are at the end of the path, and on the actual device */ + unsigned int devfn = pdev->devfn; + return ((modpath->bc[5] == PCI_SLOT(devfn)) && + (modpath->mod == PCI_FUNC(devfn))); + } + + id = PCI_SLOT(pdev->devfn) | (PCI_FUNC(pdev->devfn) << 5); + return (modpath->bc[index] == id); +} + +/** + * match_parisc_device - Matches a parisc device against a given hardware + * path entry. + * @dev: the generic device (known to be contained by a parisc_device). + * @index: the current BC index + * @modpath: the hardware path. + * @return: true if the device matches the hardware path. + */ +static int match_parisc_device(struct device *dev, int index, + struct hardware_path *modpath) +{ + struct parisc_device *curr = to_parisc_device(dev); + char id = (index == 6) ? modpath->mod : modpath->bc[index]; + + return (curr->hw_path == id); +} + +/** + * parse_tree_node - returns a device entry in the iotree + * @parent: the parent node in the tree + * @index: the current BC index + * @modpath: the hardware_path struct to match a device against + * @return: The corresponding device if found, NULL otherwise. + * + * Checks all the children of @parent for a matching @id. If none + * found, it returns NULL. + */ +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) +{ + struct device *device; + + list_for_each_entry(device, &parent->children, node) { + if (device->bus == &parisc_bus_type) { + if (match_parisc_device(device, index, modpath)) + return device; + } else if (is_pci_dev(device)) { + if (match_pci_device(device, index, modpath)) + return device; + } else if (device->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(device, index, modpath); + if (new) + return new; + } + } + + return NULL; +} + +/** + * hwpath_to_device - Finds the generic device corresponding to a given hardware path. + * @modpath: the hardware path. + * @return: The target device, NULL if not found. + */ +struct device *hwpath_to_device(struct hardware_path *modpath) +{ + int i; + struct device *parent = &root; + for (i = 0; i < 6; i++) { + if (modpath->bc[i] == -1) + continue; + parent = parse_tree_node(parent, i, modpath); + if (!parent) + return NULL; + } + if (is_pci_dev(parent)) /* pci devices already parse MOD */ + return parent; + else + return parse_tree_node(parent, 6, modpath); +} +EXPORT_SYMBOL(hwpath_to_device); + +/** + * device_to_hwpath - Populates the hwpath corresponding to the given device. + * @param dev the target device + * @param path pointer to a previously allocated hwpath struct to be filled in + */ +void device_to_hwpath(struct device *dev, struct hardware_path *path) +{ + struct parisc_device *padev; + if (dev->bus == &parisc_bus_type) { + padev = to_parisc_device(dev); + get_node_path(dev->parent, path); + path->mod = padev->hw_path; + } else if (is_pci_dev(dev)) { + get_node_path(dev, path); + } +} +EXPORT_SYMBOL(device_to_hwpath); + +#define BC_PORT_MASK 0x8 +#define BC_LOWER_PORT 0x8 + +#define BUS_CONVERTER(dev) \ + ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) + +#define IS_LOWER_PORT(dev) \ + ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + & BC_PORT_MASK) == BC_LOWER_PORT) + +#define MAX_NATIVE_DEVICES 64 +#define NATIVE_DEVICE_OFFSET 0x1000 + +#define FLEX_MASK F_EXTEND(0xfffc0000) +#define IO_IO_LOW offsetof(struct bc_module, io_io_low) +#define IO_IO_HIGH offsetof(struct bc_module, io_io_high) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) + +static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, + struct device *parent); + +void walk_lower_bus(struct parisc_device *dev) +{ + unsigned long io_io_low, io_io_high; + + if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + return; + + if(dev->id.hw_type == HPHW_IOA) { + io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); + io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; + } else { + io_io_low = (READ_IO_IO_LOW(dev) + ~FLEX_MASK) & FLEX_MASK; + io_io_high = (READ_IO_IO_HIGH(dev)+ ~FLEX_MASK) & FLEX_MASK; + } + + walk_native_bus(io_io_low, io_io_high, &dev->dev); +} + +/** + * walk_native_bus -- Probe a bus for devices + * @io_io_low: Base address of this bus. + * @io_io_high: Last address of this bus. + * @parent: The parent bus device. + * + * A native bus (eg Runway or GSC) may have up to 64 devices on it, + * spaced at intervals of 0x1000 bytes. PDC may not inform us of these + * devices, so we have to probe for them. Unfortunately, we may find + * devices which are not physically connected (such as extra serial & + * keyboard ports). This problem is not yet solved. + */ +static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, + struct device *parent) +{ + int i, devices_found = 0; + unsigned long hpa = io_io_low; + struct hardware_path path; + + get_node_path(parent, &path); + do { + for(i = 0; i < MAX_NATIVE_DEVICES; i++, hpa += NATIVE_DEVICE_OFFSET) { + struct parisc_device *dev; + + /* Was the device already added by Firmware? */ + dev = find_device_by_addr(hpa); + if (!dev) { + path.mod = i; + dev = alloc_pa_dev(hpa, &path); + if (!dev) + continue; + + register_parisc_device(dev); + devices_found++; + } + walk_lower_bus(dev); + } + } while(!devices_found && hpa < io_io_high); +} + +#define CENTRAL_BUS_ADDR F_EXTEND(0xfff80000) + +/** + * walk_central_bus - Find devices attached to the central bus + * + * PDC doesn't tell us about all devices in the system. This routine + * finds devices connected to the central bus. + */ +void walk_central_bus(void) +{ + walk_native_bus(CENTRAL_BUS_ADDR, + CENTRAL_BUS_ADDR + (MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET), + &root); +} + +static void print_parisc_device(struct parisc_device *dev) +{ + char hw_path[64]; + static int count; + + print_pa_hwpath(dev, hw_path); + printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", + ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); + + if (dev->num_addrs) { + int k; + printk(", additional addresses: "); + for (k = 0; k < dev->num_addrs; k++) + printk("0x%lx ", dev->addr[k]); + } + printk("\n"); +} + +/** + * init_parisc_bus - Some preparation to be done before inventory + */ +void init_parisc_bus(void) +{ + bus_register(&parisc_bus_type); + device_register(&root); + get_device(&root); +} + +/** + * print_parisc_devices - Print out a list of devices found in this system + */ +void print_parisc_devices(void) +{ + struct parisc_device *dev; + for_each_padev(dev) { + print_parisc_device(dev); + } +} diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S new file mode 100644 index 000000000000..ee58d37dbb27 --- /dev/null +++ b/arch/parisc/kernel/entry.S @@ -0,0 +1,2426 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * kernel entry points (interruptions, system call wrappers) + * Copyright (C) 1999,2000 Philipp Rumpf + * Copyright (C) 1999 SuSE GmbH Nuernberg + * Copyright (C) 2000 Hewlett-Packard (John Marvin) + * Copyright (C) 1999 Hewlett-Packard (Frank Rowand) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +/* we have the following possibilities to act on an interruption: + * - handle in assembly and use shadowed registers only + * - save registers to kernel stack and handle in assembly or C */ + + +#include /* for LDREG/STREG defines */ +#include +#include +#include +#include +#include + +#ifdef __LP64__ +#define CMPIB cmpib,* +#define CMPB cmpb,* +#define COND(x) *x + + .level 2.0w +#else +#define CMPIB cmpib, +#define CMPB cmpb, +#define COND(x) x + + .level 2.0 +#endif + + .import pa_dbit_lock,data + + /* space_to_prot macro creates a prot id from a space id */ + +#if (SPACEID_SHIFT) == 0 + .macro space_to_prot spc prot + depd,z \spc,62,31,\prot + .endm +#else + .macro space_to_prot spc prot + extrd,u \spc,(64 - (SPACEID_SHIFT)),32,\prot + .endm +#endif + + /* Switch to virtual mapping, trashing only %r1 */ + .macro virt_map + rsm PSW_SM_Q,%r0 + tovirt_r1 %r29 + mfsp %sr7, %r1 + or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ + mtsp %r1, %sr3 + mtsp %r0, %sr4 + mtsp %r0, %sr5 + mtsp %r0, %sr6 + mtsp %r0, %sr7 + load32 KERNEL_PSW, %r1 + mtctl %r1, %cr22 + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + load32 4f, %r1 + mtctl %r1, %cr18 /* Set IIAOQ tail */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* Set IIAOQ head */ + rfir + nop +4: + .endm + + /* + * The "get_stack" macros are responsible for determining the + * kernel stack value. + * + * For Faults: + * If sr7 == 0 + * Already using a kernel stack, so call the + * get_stack_use_r30 macro to push a pt_regs structure + * on the stack, and store registers there. + * else + * Need to set up a kernel stack, so call the + * get_stack_use_cr30 macro to set up a pointer + * to the pt_regs structure contained within the + * task pointer pointed to by cr30. Set the stack + * pointer to point to the end of the task structure. + * + * For Interrupts: + * If sr7 == 0 + * Already using a kernel stack, check to see if r30 + * is already pointing to the per processor interrupt + * stack. If it is, call the get_stack_use_r30 macro + * to push a pt_regs structure on the stack, and store + * registers there. Otherwise, call get_stack_use_cr31 + * to get a pointer to the base of the interrupt stack + * and push a pt_regs structure on that stack. + * else + * Need to set up a kernel stack, so call the + * get_stack_use_cr30 macro to set up a pointer + * to the pt_regs structure contained within the + * task pointer pointed to by cr30. Set the stack + * pointer to point to the end of the task structure. + * N.B: We don't use the interrupt stack for the + * first interrupt from userland, because signals/ + * resched's are processed when returning to userland, + * and we can sleep in those cases. + * + * Note that we use shadowed registers for temps until + * we can save %r26 and %r29. %r26 is used to preserve + * %r8 (a shadowed register) which temporarily contained + * either the fault type ("code") or the eirr. We need + * to use a non-shadowed register to carry the value over + * the rfir in virt_map. We use %r26 since this value winds + * up being passed as the argument to either do_cpu_irq_mask + * or handle_interruption. %r29 is used to hold a pointer + * the register save area, and once again, it needs to + * be a non-shadowed register so that it survives the rfir. + * + * N.B. TASK_SZ_ALGN and PT_SZ_ALGN include space for a stack frame. + */ + + .macro get_stack_use_cr30 + + /* we save the registers in the task struct */ + + mfctl %cr30, %r1 + tophys %r1,%r9 + LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ + tophys %r1,%r9 + ldo TASK_REGS(%r9),%r9 + STREG %r30, PT_GR30(%r9) + STREG %r29,PT_GR29(%r9) + STREG %r26,PT_GR26(%r9) + copy %r9,%r29 + mfctl %cr30, %r1 + ldo THREAD_SZ_ALGN(%r1), %r30 + .endm + + .macro get_stack_use_r30 + + /* we put a struct pt_regs on the stack and save the registers there */ + + tophys %r30,%r9 + STREG %r30,PT_GR30(%r9) + ldo PT_SZ_ALGN(%r30),%r30 + STREG %r29,PT_GR29(%r9) + STREG %r26,PT_GR26(%r9) + copy %r9,%r29 + .endm + + .macro rest_stack + LDREG PT_GR1(%r29), %r1 + LDREG PT_GR30(%r29),%r30 + LDREG PT_GR29(%r29),%r29 + .endm + + /* default interruption handler + * (calls traps.c:handle_interruption) */ + .macro def code + b intr_save + ldi \code, %r8 + .align 32 + .endm + + /* Interrupt interruption handler + * (calls irq.c:do_cpu_irq_mask) */ + .macro extint code + b intr_extint + mfsp %sr7,%r16 + .align 32 + .endm + + .import os_hpmc, code + + /* HPMC handler */ + .macro hpmc code + nop /* must be a NOP, will be patched later */ + load32 PA(os_hpmc), %r3 + bv,n 0(%r3) + nop + .word 0 /* checksum (will be patched) */ + .word PA(os_hpmc) /* address of handler */ + .word 0 /* length of handler */ + .endm + + /* + * Performance Note: Instructions will be moved up into + * this part of the code later on, once we are sure + * that the tlb miss handlers are close to final form. + */ + + /* Register definitions for tlb miss handler macros */ + + va = r8 /* virtual address for which the trap occured */ + spc = r24 /* space for which the trap occured */ + +#ifndef __LP64__ + + /* + * itlb miss interruption handler (parisc 1.1 - 32 bit) + */ + + .macro itlb_11 code + + mfctl %pcsq, spc + b itlb_miss_11 + mfctl %pcoq, va + + .align 32 + .endm +#endif + + /* + * itlb miss interruption handler (parisc 2.0) + */ + + .macro itlb_20 code + mfctl %pcsq, spc +#ifdef __LP64__ + b itlb_miss_20w +#else + b itlb_miss_20 +#endif + mfctl %pcoq, va + + .align 32 + .endm + +#ifndef __LP64__ + /* + * naitlb miss interruption handler (parisc 1.1 - 32 bit) + * + * Note: naitlb misses will be treated + * as an ordinary itlb miss for now. + * However, note that naitlb misses + * have the faulting address in the + * IOR/ISR. + */ + + .macro naitlb_11 code + + mfctl %isr,spc + b itlb_miss_11 + mfctl %ior,va + /* FIXME: If user causes a naitlb miss, the priv level may not be in + * lower bits of va, where the itlb miss handler is expecting them + */ + + .align 32 + .endm +#endif + + /* + * naitlb miss interruption handler (parisc 2.0) + * + * Note: naitlb misses will be treated + * as an ordinary itlb miss for now. + * However, note that naitlb misses + * have the faulting address in the + * IOR/ISR. + */ + + .macro naitlb_20 code + + mfctl %isr,spc +#ifdef __LP64__ + b itlb_miss_20w +#else + b itlb_miss_20 +#endif + mfctl %ior,va + /* FIXME: If user causes a naitlb miss, the priv level may not be in + * lower bits of va, where the itlb miss handler is expecting them + */ + + .align 32 + .endm + +#ifndef __LP64__ + /* + * dtlb miss interruption handler (parisc 1.1 - 32 bit) + */ + + .macro dtlb_11 code + + mfctl %isr, spc + b dtlb_miss_11 + mfctl %ior, va + + .align 32 + .endm +#endif + + /* + * dtlb miss interruption handler (parisc 2.0) + */ + + .macro dtlb_20 code + + mfctl %isr, spc +#ifdef __LP64__ + b dtlb_miss_20w +#else + b dtlb_miss_20 +#endif + mfctl %ior, va + + .align 32 + .endm + +#ifndef __LP64__ + /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ + + .macro nadtlb_11 code + + mfctl %isr,spc + b nadtlb_miss_11 + mfctl %ior,va + + .align 32 + .endm +#endif + + /* nadtlb miss interruption handler (parisc 2.0) */ + + .macro nadtlb_20 code + + mfctl %isr,spc +#ifdef __LP64__ + b nadtlb_miss_20w +#else + b nadtlb_miss_20 +#endif + mfctl %ior,va + + .align 32 + .endm + +#ifndef __LP64__ + /* + * dirty bit trap interruption handler (parisc 1.1 - 32 bit) + */ + + .macro dbit_11 code + + mfctl %isr,spc + b dbit_trap_11 + mfctl %ior,va + + .align 32 + .endm +#endif + + /* + * dirty bit trap interruption handler (parisc 2.0) + */ + + .macro dbit_20 code + + mfctl %isr,spc +#ifdef __LP64__ + b dbit_trap_20w +#else + b dbit_trap_20 +#endif + mfctl %ior,va + + .align 32 + .endm + + /* The following are simple 32 vs 64 bit instruction + * abstractions for the macros */ + .macro EXTR reg1,start,length,reg2 +#ifdef __LP64__ + extrd,u \reg1,32+\start,\length,\reg2 +#else + extrw,u \reg1,\start,\length,\reg2 +#endif + .endm + + .macro DEP reg1,start,length,reg2 +#ifdef __LP64__ + depd \reg1,32+\start,\length,\reg2 +#else + depw \reg1,\start,\length,\reg2 +#endif + .endm + + .macro DEPI val,start,length,reg +#ifdef __LP64__ + depdi \val,32+\start,\length,\reg +#else + depwi \val,\start,\length,\reg +#endif + .endm + + /* In LP64, the space contains part of the upper 32 bits of the + * fault. We have to extract this and place it in the va, + * zeroing the corresponding bits in the space register */ + .macro space_adjust spc,va,tmp +#ifdef __LP64__ + extrd,u \spc,63,SPACEID_SHIFT,\tmp + depd %r0,63,SPACEID_SHIFT,\spc + depd \tmp,31,SPACEID_SHIFT,\va +#endif + .endm + + .import swapper_pg_dir,code + + /* Get the pgd. For faults on space zero (kernel space), this + * is simply swapper_pg_dir. For user space faults, the + * pgd is stored in %cr25 */ + .macro get_pgd spc,reg + ldil L%PA(swapper_pg_dir),\reg + ldo R%PA(swapper_pg_dir)(\reg),\reg + or,COND(=) %r0,\spc,%r0 + mfctl %cr25,\reg + .endm + + /* + space_check(spc,tmp,fault) + + spc - The space we saw the fault with. + tmp - The place to store the current space. + fault - Function to call on failure. + + Only allow faults on different spaces from the + currently active one if we're the kernel + + */ + .macro space_check spc,tmp,fault + mfsp %sr7,\tmp + or,COND(<>) %r0,\spc,%r0 /* user may execute gateway page + * as kernel, so defeat the space + * check if it is */ + copy \spc,\tmp + or,COND(=) %r0,\tmp,%r0 /* nullify if executing as kernel */ + cmpb,COND(<>),n \tmp,\spc,\fault + .endm + + /* Look up a PTE in a 2-Level scheme (faulting at each + * level if the entry isn't present + * + * NOTE: we use ldw even for LP64, since the short pointers + * can address up to 1TB + */ + .macro L2_ptep pmd,pte,index,va,fault +#if PT_NLEVELS == 3 + EXTR \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index +#else + EXTR \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index +#endif + DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ + copy %r0,\pte + ldw,s \index(\pmd),\pmd + bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault + DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ + copy \pmd,%r9 +#ifdef __LP64__ + shld %r9,PxD_VALUE_SHIFT,\pmd +#else + shlw %r9,PxD_VALUE_SHIFT,\pmd +#endif + EXTR \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index + DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ + shladd \index,BITS_PER_PTE_ENTRY,\pmd,\pmd + LDREG %r0(\pmd),\pte /* pmd is now pte */ + bb,>=,n \pte,_PAGE_PRESENT_BIT,\fault + .endm + + /* Look up PTE in a 3-Level scheme. + * + * Here we implement a Hybrid L2/L3 scheme: we allocate the + * first pmd adjacent to the pgd. This means that we can + * subtract a constant offset to get to it. The pmd and pgd + * sizes are arranged so that a single pmd covers 4GB (giving + * a full LP64 process access to 8TB) so our lookups are + * effectively L2 for the first 4GB of the kernel (i.e. for + * all ILP32 processes and all the kernel for machines with + * under 4GB of memory) */ + .macro L3_ptep pgd,pte,index,va,fault + extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index + copy %r0,\pte + extrd,u,*= \va,31,32,%r0 + ldw,s \index(\pgd),\pgd + extrd,u,*= \va,31,32,%r0 + bb,>=,n \pgd,_PxD_PRESENT_BIT,\fault + extrd,u,*= \va,31,32,%r0 + shld \pgd,PxD_VALUE_SHIFT,\index + extrd,u,*= \va,31,32,%r0 + copy \index,\pgd + extrd,u,*<> \va,31,32,%r0 + ldo ASM_PGD_PMD_OFFSET(\pgd),\pgd + L2_ptep \pgd,\pte,\index,\va,\fault + .endm + + /* Set the _PAGE_ACCESSED bit of the PTE. Be clever and + * don't needlessly dirty the cache line if it was already set */ + .macro update_ptep ptep,pte,tmp,tmp1 + ldi _PAGE_ACCESSED,\tmp1 + or \tmp1,\pte,\tmp + and,COND(<>) \tmp1,\pte,%r0 + STREG \tmp,0(\ptep) + .endm + + /* Set the dirty bit (and accessed bit). No need to be + * clever, this is only used from the dirty fault */ + .macro update_dirty ptep,pte,tmp + ldi _PAGE_ACCESSED|_PAGE_DIRTY,\tmp + or \tmp,\pte,\pte + STREG \pte,0(\ptep) + .endm + + /* Convert the pte and prot to tlb insertion values. How + * this happens is quite subtle, read below */ + .macro make_insert_tlb spc,pte,prot + space_to_prot \spc \prot /* create prot id from space */ + /* The following is the real subtlety. This is depositing + * T <-> _PAGE_REFTRAP + * D <-> _PAGE_DIRTY + * B <-> _PAGE_DMB (memory break) + * + * Then incredible subtlety: The access rights are + * _PAGE_GATEWAY _PAGE_EXEC _PAGE_READ + * See 3-14 of the parisc 2.0 manual + * + * Finally, _PAGE_READ goes in the top bit of PL1 (so we + * trigger an access rights trap in user space if the user + * tries to read an unreadable page */ + depd \pte,8,7,\prot + + /* PAGE_USER indicates the page can be read with user privileges, + * so deposit X1|11 to PL1|PL2 (remember the upper bit of PL1 + * contains _PAGE_READ */ + extrd,u,*= \pte,_PAGE_USER_BIT+32,1,%r0 + depdi 7,11,3,\prot + /* If we're a gateway page, drop PL2 back to zero for promotion + * to kernel privilege (so we can execute the page as kernel). + * Any privilege promotion page always denys read and write */ + extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0 + depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */ + + /* Get rid of prot bits and convert to page addr for iitlbt */ + + depd %r0,63,PAGE_SHIFT,\pte + extrd,u \pte,56,32,\pte + .endm + + /* Identical macro to make_insert_tlb above, except it + * makes the tlb entry for the differently formatted pa11 + * insertion instructions */ + .macro make_insert_tlb_11 spc,pte,prot + zdep \spc,30,15,\prot + dep \pte,8,7,\prot + extru,= \pte,_PAGE_NO_CACHE_BIT,1,%r0 + depi 1,12,1,\prot + extru,= \pte,_PAGE_USER_BIT,1,%r0 + depi 7,11,3,\prot /* Set for user space (1 rsvd for read) */ + extru,= \pte,_PAGE_GATEWAY_BIT,1,%r0 + depi 0,11,2,\prot /* If Gateway, Set PL2 to 0 */ + + /* Get rid of prot bits and convert to page addr for iitlba */ + + depi 0,31,12,\pte + extru \pte,24,25,\pte + + .endm + + /* This is for ILP32 PA2.0 only. The TLB insertion needs + * to extend into I/O space if the address is 0xfXXXXXXX + * so we extend the f's into the top word of the pte in + * this case */ + .macro f_extend pte,tmp + extrd,s \pte,42,4,\tmp + addi,<> 1,\tmp,%r0 + extrd,s \pte,63,25,\pte + .endm + + /* The alias region is an 8MB aligned 16MB to do clear and + * copy user pages at addresses congruent with the user + * virtual address. + * + * To use the alias page, you set %r26 up with the to TLB + * entry (identifying the physical page) and %r23 up with + * the from tlb entry (or nothing if only a to entry---for + * clear_user_page_asm) */ + .macro do_alias spc,tmp,tmp1,va,pte,prot,fault + cmpib,COND(<>),n 0,\spc,\fault + ldil L%(TMPALIAS_MAP_START),\tmp +#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000) + /* on LP64, ldi will sign extend into the upper 32 bits, + * which is behaviour we don't want */ + depdi 0,31,32,\tmp +#endif + copy \va,\tmp1 + DEPI 0,31,23,\tmp1 + cmpb,COND(<>),n \tmp,\tmp1,\fault + ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot + depd,z \prot,8,7,\prot + /* + * OK, it is in the temp alias region, check whether "from" or "to". + * Check "subtle" note in pacache.S re: r23/r26. + */ +#ifdef __LP64__ + extrd,u,*= \va,41,1,%r0 +#else + extrw,u,= \va,9,1,%r0 +#endif + or,COND(tr) %r23,%r0,\pte + or %r26,%r0,\pte + .endm + + + /* + * Align fault_vector_20 on 4K boundary so that both + * fault_vector_11 and fault_vector_20 are on the + * same page. This is only necessary as long as we + * write protect the kernel text, which we may stop + * doing once we use large page translations to cover + * the static part of the kernel address space. + */ + + .export fault_vector_20 + + .text + + .align 4096 + +fault_vector_20: + /* First vector is invalid (0) */ + .ascii "cows can fly" + .byte 0 + .align 32 + + hpmc 1 + def 2 + def 3 + extint 4 + def 5 + itlb_20 6 + def 7 + def 8 + def 9 + def 10 + def 11 + def 12 + def 13 + def 14 + dtlb_20 15 +#if 0 + naitlb_20 16 +#else + def 16 +#endif + nadtlb_20 17 + def 18 + def 19 + dbit_20 20 + def 21 + def 22 + def 23 + def 24 + def 25 + def 26 + def 27 + def 28 + def 29 + def 30 + def 31 + +#ifndef __LP64__ + + .export fault_vector_11 + + .align 2048 + +fault_vector_11: + /* First vector is invalid (0) */ + .ascii "cows can fly" + .byte 0 + .align 32 + + hpmc 1 + def 2 + def 3 + extint 4 + def 5 + itlb_11 6 + def 7 + def 8 + def 9 + def 10 + def 11 + def 12 + def 13 + def 14 + dtlb_11 15 +#if 0 + naitlb_11 16 +#else + def 16 +#endif + nadtlb_11 17 + def 18 + def 19 + dbit_11 20 + def 21 + def 22 + def 23 + def 24 + def 25 + def 26 + def 27 + def 28 + def 29 + def 30 + def 31 + +#endif + + .import handle_interruption,code + .import do_cpu_irq_mask,code + + /* + * r26 = function to be called + * r25 = argument to pass in + * r24 = flags for do_fork() + * + * Kernel threads don't ever return, so they don't need + * a true register context. We just save away the arguments + * for copy_thread/ret_ to properly set up the child. + */ + +#define CLONE_VM 0x100 /* Must agree with */ +#define CLONE_UNTRACED 0x00800000 + + .export __kernel_thread, code + .import do_fork +__kernel_thread: + STREG %r2, -RP_OFFSET(%r30) + + copy %r30, %r1 + ldo PT_SZ_ALGN(%r30),%r30 +#ifdef __LP64__ + /* Yo, function pointers in wide mode are little structs... -PB */ + ldd 24(%r26), %r2 + STREG %r2, PT_GR27(%r1) /* Store childs %dp */ + ldd 16(%r26), %r26 + + STREG %r22, PT_GR22(%r1) /* save r22 (arg5) */ + copy %r0, %r22 /* user_tid */ +#endif + STREG %r26, PT_GR26(%r1) /* Store function & argument for child */ + STREG %r25, PT_GR25(%r1) + ldil L%CLONE_UNTRACED, %r26 + ldo CLONE_VM(%r26), %r26 /* Force CLONE_VM since only init_mm */ + or %r26, %r24, %r26 /* will have kernel mappings. */ + ldi 1, %r25 /* stack_start, signals kernel thread */ + stw %r0, -52(%r30) /* user_tid */ +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + BL do_fork, %r2 + copy %r1, %r24 /* pt_regs */ + + /* Parent Returns here */ + + LDREG -PT_SZ_ALGN-RP_OFFSET(%r30), %r2 + ldo -PT_SZ_ALGN(%r30), %r30 + bv %r0(%r2) + nop + + /* + * Child Returns here + * + * copy_thread moved args from temp save area set up above + * into task save area. + */ + + .export ret_from_kernel_thread +ret_from_kernel_thread: + + /* Call schedule_tail first though */ + BL schedule_tail, %r2 + nop + + LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 + LDREG TASK_PT_GR25(%r1), %r26 +#ifdef __LP64__ + LDREG TASK_PT_GR27(%r1), %r27 + LDREG TASK_PT_GR22(%r1), %r22 +#endif + LDREG TASK_PT_GR26(%r1), %r1 + ble 0(%sr7, %r1) + copy %r31, %r2 + +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ + loadgp /* Thread could have been in a module */ +#endif + b sys_exit + ldi 0, %r26 + + .import sys_execve, code + .export __execve, code +__execve: + copy %r2, %r15 + copy %r30, %r16 + ldo PT_SZ_ALGN(%r30), %r30 + STREG %r26, PT_GR26(%r16) + STREG %r25, PT_GR25(%r16) + STREG %r24, PT_GR24(%r16) +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + BL sys_execve, %r2 + copy %r16, %r26 + + cmpib,=,n 0,%r28,intr_return /* forward */ + + /* yes, this will trap and die. */ + copy %r15, %r2 + copy %r16, %r30 + bv %r0(%r2) + nop + + .align 4 + + /* + * struct task_struct *_switch_to(struct task_struct *prev, + * struct task_struct *next) + * + * switch kernel stacks and return prev */ + .export _switch_to, code +_switch_to: + STREG %r2, -RP_OFFSET(%r30) + + callee_save + + load32 _switch_to_ret, %r2 + + STREG %r2, TASK_PT_KPC(%r26) + LDREG TASK_PT_KPC(%r25), %r2 + + STREG %r30, TASK_PT_KSP(%r26) + LDREG TASK_PT_KSP(%r25), %r30 + LDREG TASK_THREAD_INFO(%r25), %r25 + bv %r0(%r2) + mtctl %r25,%cr30 + +_switch_to_ret: + mtctl %r0, %cr0 /* Needed for single stepping */ + callee_rest + + LDREG -RP_OFFSET(%r30), %r2 + bv %r0(%r2) + copy %r26, %r28 + + /* + * Common rfi return path for interruptions, kernel execve, and + * sys_rt_sigreturn (sometimes). The sys_rt_sigreturn syscall will + * return via this path if the signal was received when the process + * was running; if the process was blocked on a syscall then the + * normal syscall_exit path is used. All syscalls for traced + * proceses exit via intr_restore. + * + * XXX If any syscalls that change a processes space id ever exit + * this way, then we will need to copy %sr3 in to PT_SR[3..7], and + * adjust IASQ[0..1]. + * + * Note that the following code uses a "relied upon translation". + * See the parisc ACD for details. The ssm is necessary due to a + * PCXT bug. + */ + + .align 4096 + + .export syscall_exit_rfi +syscall_exit_rfi: + mfctl %cr30,%r16 + LDREG TI_TASK(%r16), %r16 /* thread_info -> task_struct */ + ldo TASK_REGS(%r16),%r16 + /* Force iaoq to userspace, as the user has had access to our current + * context via sigcontext. Also Filter the PSW for the same reason. + */ + LDREG PT_IAOQ0(%r16),%r19 + depi 3,31,2,%r19 + STREG %r19,PT_IAOQ0(%r16) + LDREG PT_IAOQ1(%r16),%r19 + depi 3,31,2,%r19 + STREG %r19,PT_IAOQ1(%r16) + LDREG PT_PSW(%r16),%r19 + load32 USER_PSW_MASK,%r1 +#ifdef __LP64__ + load32 USER_PSW_HI_MASK,%r20 + depd %r20,31,32,%r1 +#endif + and %r19,%r1,%r19 /* Mask out bits that user shouldn't play with */ + load32 USER_PSW,%r1 + or %r19,%r1,%r19 /* Make sure default USER_PSW bits are set */ + STREG %r19,PT_PSW(%r16) + + /* + * If we aren't being traced, we never saved space registers + * (we don't store them in the sigcontext), so set them + * to "proper" values now (otherwise we'll wind up restoring + * whatever was last stored in the task structure, which might + * be inconsistent if an interrupt occured while on the gateway + * page) Note that we may be "trashing" values the user put in + * them, but we don't support the the user changing them. + */ + + STREG %r0,PT_SR2(%r16) + mfsp %sr3,%r19 + STREG %r19,PT_SR0(%r16) + STREG %r19,PT_SR1(%r16) + STREG %r19,PT_SR3(%r16) + STREG %r19,PT_SR4(%r16) + STREG %r19,PT_SR5(%r16) + STREG %r19,PT_SR6(%r16) + STREG %r19,PT_SR7(%r16) + +intr_return: + /* NOTE: Need to enable interrupts incase we schedule. */ + ssm PSW_SM_I, %r0 + + /* Check for software interrupts */ + + .import irq_stat,data + + load32 irq_stat,%r19 +#ifdef CONFIG_SMP + mfctl %cr30,%r1 + ldw TI_CPU(%r1),%r1 /* get cpu # - int */ + /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount + ** irq_stat[] is defined using ____cacheline_aligned. + */ +#ifdef __LP64__ + shld %r1, 6, %r20 +#else + shlw %r1, 5, %r20 +#endif + add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ +#endif /* CONFIG_SMP */ + + LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ + cmpib,<>,n 0,%r20,intr_do_softirq /* forward */ + +intr_check_resched: + + /* check for reschedule */ + mfctl %cr30,%r1 + LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_NEED_RESCHED */ + bb,<,n %r19,31-TIF_NEED_RESCHED,intr_do_resched /* forward */ + +intr_check_sig: + /* As above */ + mfctl %cr30,%r1 + LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_SIGPENDING */ + bb,<,n %r19, 31-TIF_SIGPENDING, intr_do_signal /* forward */ + +intr_restore: + copy %r16,%r29 + ldo PT_FR31(%r29),%r1 + rest_fp %r1 + rest_general %r29 + + /* Create a "relied upon translation" PA 2.0 Arch. F-5 */ + ssm 0,%r0 + nop + nop + nop + nop + nop + nop + nop + tophys_r1 %r29 + rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0 + + /* Restore space id's and special cr's from PT_REGS + * structure pointed to by r29 */ + rest_specials %r29 + + /* Important: Note that rest_stack restores r29 + * last (we are using it)! It also restores r1 and r30. */ + rest_stack + + rfi + nop + nop + nop + nop + nop + nop + nop + nop + + .import do_softirq,code +intr_do_softirq: + bl do_softirq,%r2 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#else + nop +#endif + b intr_check_resched + nop + + .import schedule,code +intr_do_resched: + /* Only do reschedule if we are returning to user space */ + LDREG PT_IASQ0(%r16), %r20 + CMPIB= 0,%r20,intr_restore /* backward */ + nop + LDREG PT_IASQ1(%r16), %r20 + CMPIB= 0,%r20,intr_restore /* backward */ + nop + +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + ldil L%intr_check_sig, %r2 + b schedule + ldo R%intr_check_sig(%r2), %r2 + + + .import do_signal,code +intr_do_signal: + /* + This check is critical to having LWS + working. The IASQ is zero on the gateway + page and we cannot deliver any signals until + we get off the gateway page. + + Only do signals if we are returning to user space + */ + LDREG PT_IASQ0(%r16), %r20 + CMPIB= 0,%r20,intr_restore /* backward */ + nop + LDREG PT_IASQ1(%r16), %r20 + CMPIB= 0,%r20,intr_restore /* backward */ + nop + + copy %r0, %r24 /* unsigned long in_syscall */ + copy %r16, %r25 /* struct pt_regs *regs */ +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + BL do_signal,%r2 + copy %r0, %r26 /* sigset_t *oldset = NULL */ + + b intr_check_sig + nop + + /* + * External interrupts. + */ + +intr_extint: + CMPIB=,n 0,%r16,1f + get_stack_use_cr30 + b,n 3f + +1: +#if 0 /* Interrupt Stack support not working yet! */ + mfctl %cr31,%r1 + copy %r30,%r17 + /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ +#ifdef __LP64__ + depdi 0,63,15,%r17 +#else + depi 0,31,15,%r17 +#endif + CMPB=,n %r1,%r17,2f + get_stack_use_cr31 + b,n 3f +#endif +2: + get_stack_use_r30 + +3: + save_specials %r29 + virt_map + save_general %r29 + + ldo PT_FR0(%r29), %r24 + save_fp %r24 + + loadgp + + copy %r29, %r26 /* arg0 is pt_regs */ + copy %r29, %r16 /* save pt_regs */ + + ldil L%intr_return, %r2 + +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + b do_cpu_irq_mask + ldo R%intr_return(%r2), %r2 /* return to intr_return, not here */ + + + /* Generic interruptions (illegal insn, unaligned, page fault, etc) */ + + .export intr_save, code /* for os_hpmc */ + +intr_save: + mfsp %sr7,%r16 + CMPIB=,n 0,%r16,1f + get_stack_use_cr30 + b 2f + copy %r8,%r26 + +1: + get_stack_use_r30 + copy %r8,%r26 + +2: + save_specials %r29 + + /* If this trap is a itlb miss, skip saving/adjusting isr/ior */ + + /* + * FIXME: 1) Use a #define for the hardwired "6" below (and in + * traps.c. + * 2) Once we start executing code above 4 Gb, we need + * to adjust iasq/iaoq here in the same way we + * adjust isr/ior below. + */ + + CMPIB=,n 6,%r26,skip_save_ior + + /* save_specials left ipsw value in r8 for us to test */ + + mfctl %cr20, %r16 /* isr */ + mfctl %cr21, %r17 /* ior */ + +#ifdef __LP64__ + /* + * If the interrupted code was running with W bit off (32 bit), + * clear the b bits (bits 0 & 1) in the ior. + */ + extrd,u,*<> %r8,PSW_W_BIT,1,%r0 + depdi 0,1,2,%r17 + + /* + * FIXME: This code has hardwired assumptions about the split + * between space bits and offset bits. This will change + * when we allow alternate page sizes. + */ + + /* adjust isr/ior. */ + + extrd,u %r16,63,7,%r1 /* get high bits from isr for ior */ + depd %r1,31,7,%r17 /* deposit them into ior */ + depdi 0,63,7,%r16 /* clear them from isr */ +#endif + STREG %r16, PT_ISR(%r29) + STREG %r17, PT_IOR(%r29) + + +skip_save_ior: + virt_map + save_general %r29 + + ldo PT_FR0(%r29), %r25 + save_fp %r25 + + loadgp + + copy %r29, %r25 /* arg1 is pt_regs */ +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + ldil L%intr_check_sig, %r2 + copy %r25, %r16 /* save pt_regs */ + + b handle_interruption + ldo R%intr_check_sig(%r2), %r2 + + + /* + * Note for all tlb miss handlers: + * + * cr24 contains a pointer to the kernel address space + * page directory. + * + * cr25 contains a pointer to the current user address + * space page directory. + * + * sr3 will contain the space id of the user address space + * of the current running thread while that thread is + * running in the kernel. + */ + + /* + * register number allocations. Note that these are all + * in the shadowed registers + */ + + t0 = r1 /* temporary register 0 */ + va = r8 /* virtual address for which the trap occured */ + t1 = r9 /* temporary register 1 */ + pte = r16 /* pte/phys page # */ + prot = r17 /* prot bits */ + spc = r24 /* space for which the trap occured */ + ptp = r25 /* page directory/page table pointer */ + +#ifdef __LP64__ + +dtlb_miss_20w: + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,dtlb_fault + + L3_ptep ptp,pte,t0,va,dtlb_check_alias_20w + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + idtlbt pte,prot + + rfir + nop + +dtlb_check_alias_20w: + do_alias spc,t0,t1,va,pte,prot,dtlb_fault + + idtlbt pte,prot + + rfir + nop + +nadtlb_miss_20w: + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,nadtlb_fault + + L3_ptep ptp,pte,t0,va,nadtlb_check_flush_20w + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + idtlbt pte,prot + + rfir + nop + +nadtlb_check_flush_20w: + bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate + + /* Insert a "flush only" translation */ + + depdi,z 7,7,3,prot + depdi 1,10,1,prot + + /* Get rid of prot bits and convert to page addr for idtlbt */ + + depdi 0,63,12,pte + extrd,u pte,56,52,pte + idtlbt pte,prot + + rfir + nop + +#else + +dtlb_miss_11: + get_pgd spc,ptp + + space_check spc,t0,dtlb_fault + + L2_ptep ptp,pte,t0,va,dtlb_check_alias_11 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb_11 spc,pte,prot + + mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + idtlba pte,(%sr1,va) + idtlbp prot,(%sr1,va) + + mtsp t0, %sr1 /* Restore sr1 */ + + rfir + nop + +dtlb_check_alias_11: + + /* Check to see if fault is in the temporary alias region */ + + cmpib,<>,n 0,spc,dtlb_fault /* forward */ + ldil L%(TMPALIAS_MAP_START),t0 + copy va,t1 + depwi 0,31,23,t1 + cmpb,<>,n t0,t1,dtlb_fault /* forward */ + ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),prot + depw,z prot,8,7,prot + + /* + * OK, it is in the temp alias region, check whether "from" or "to". + * Check "subtle" note in pacache.S re: r23/r26. + */ + + extrw,u,= va,9,1,r0 + or,tr %r23,%r0,pte /* If "from" use "from" page */ + or %r26,%r0,pte /* else "to", use "to" page */ + + idtlba pte,(va) + idtlbp prot,(va) + + rfir + nop + +nadtlb_miss_11: + get_pgd spc,ptp + + space_check spc,t0,nadtlb_fault + + L2_ptep ptp,pte,t0,va,nadtlb_check_flush_11 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb_11 spc,pte,prot + + + mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + idtlba pte,(%sr1,va) + idtlbp prot,(%sr1,va) + + mtsp t0, %sr1 /* Restore sr1 */ + + rfir + nop + +nadtlb_check_flush_11: + bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate + + /* Insert a "flush only" translation */ + + zdepi 7,7,3,prot + depi 1,10,1,prot + + /* Get rid of prot bits and convert to page addr for idtlba */ + + depi 0,31,12,pte + extru pte,24,25,pte + + mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + idtlba pte,(%sr1,va) + idtlbp prot,(%sr1,va) + + mtsp t0, %sr1 /* Restore sr1 */ + + rfir + nop + +dtlb_miss_20: + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,dtlb_fault + + L2_ptep ptp,pte,t0,va,dtlb_check_alias_20 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + f_extend pte,t0 + + idtlbt pte,prot + + rfir + nop + +dtlb_check_alias_20: + do_alias spc,t0,t1,va,pte,prot,dtlb_fault + + idtlbt pte,prot + + rfir + nop + +nadtlb_miss_20: + get_pgd spc,ptp + + space_check spc,t0,nadtlb_fault + + L2_ptep ptp,pte,t0,va,nadtlb_check_flush_20 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + f_extend pte,t0 + + idtlbt pte,prot + + rfir + nop + +nadtlb_check_flush_20: + bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate + + /* Insert a "flush only" translation */ + + depdi,z 7,7,3,prot + depdi 1,10,1,prot + + /* Get rid of prot bits and convert to page addr for idtlbt */ + + depdi 0,63,12,pte + extrd,u pte,56,32,pte + idtlbt pte,prot + + rfir + nop +#endif + +nadtlb_emulate: + + /* + * Non access misses can be caused by fdc,fic,pdc,lpa,probe and + * probei instructions. We don't want to fault for these + * instructions (not only does it not make sense, it can cause + * deadlocks, since some flushes are done with the mmap + * semaphore held). If the translation doesn't exist, we can't + * insert a translation, so have to emulate the side effects + * of the instruction. Since we don't insert a translation + * we can get a lot of faults during a flush loop, so it makes + * sense to try to do it here with minimum overhead. We only + * emulate fdc,fic,pdc,probew,prober instructions whose base + * and index registers are not shadowed. We defer everything + * else to the "slow" path. + */ + + mfctl %cr19,%r9 /* Get iir */ + + /* PA 2.0 Arch Ref. Book pg 382 has a good description of the insn bits. + Checks for fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw */ + + /* Checks for fdc,fdce,pdc,"fic,4f" only */ + ldi 0x280,%r16 + and %r9,%r16,%r17 + cmpb,<>,n %r16,%r17,nadtlb_probe_check + bb,>=,n %r9,26,nadtlb_nullify /* m bit not set, just nullify */ + BL get_register,%r25 + extrw,u %r9,15,5,%r8 /* Get index register # */ + CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ + copy %r1,%r24 + BL get_register,%r25 + extrw,u %r9,10,5,%r8 /* Get base register # */ + CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ + BL set_register,%r25 + add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ + +nadtlb_nullify: + mfctl %cr22,%r8 /* Get ipsw */ + ldil L%PSW_N,%r9 + or %r8,%r9,%r8 /* Set PSW_N */ + mtctl %r8,%cr22 + + rfir + nop + + /* + When there is no translation for the probe address then we + must nullify the insn and return zero in the target regsiter. + This will indicate to the calling code that it does not have + write/read privileges to this address. + + This should technically work for prober and probew in PA 1.1, + and also probe,r and probe,w in PA 2.0 + + WARNING: USE ONLY NON-SHADOW REGISTERS WITH PROBE INSN! + THE SLOW-PATH EMULATION HAS NOT BEEN WRITTEN YET. + + */ +nadtlb_probe_check: + ldi 0x80,%r16 + and %r9,%r16,%r17 + cmpb,<>,n %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/ + BL get_register,%r25 /* Find the target register */ + extrw,u %r9,31,5,%r8 /* Get target register */ + CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */ + BL set_register,%r25 + copy %r0,%r1 /* Write zero to target register */ + b nadtlb_nullify /* Nullify return insn */ + nop + + +#ifdef __LP64__ +itlb_miss_20w: + + /* + * I miss is a little different, since we allow users to fault + * on the gateway page which is in the kernel address space. + */ + + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,itlb_fault + + L3_ptep ptp,pte,t0,va,itlb_fault + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + iitlbt pte,prot + + rfir + nop + +#else + +itlb_miss_11: + get_pgd spc,ptp + + space_check spc,t0,itlb_fault + + L2_ptep ptp,pte,t0,va,itlb_fault + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb_11 spc,pte,prot + + mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + iitlba pte,(%sr1,va) + iitlbp prot,(%sr1,va) + + mtsp t0, %sr1 /* Restore sr1 */ + + rfir + nop + +itlb_miss_20: + get_pgd spc,ptp + + space_check spc,t0,itlb_fault + + L2_ptep ptp,pte,t0,va,itlb_fault + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + f_extend pte,t0 + + iitlbt pte,prot + + rfir + nop + +#endif + +#ifdef __LP64__ + +dbit_trap_20w: + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,dbit_fault + + L3_ptep ptp,pte,t0,va,dbit_fault + +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nolock_20w + load32 PA(pa_dbit_lock),t0 + +dbit_spin_20w: + ldcw 0(t0),t1 + cmpib,= 0,t1,dbit_spin_20w + nop + +dbit_nolock_20w: +#endif + update_dirty ptp,pte,t1 + + make_insert_tlb spc,pte,prot + + idtlbt pte,prot +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nounlock_20w + ldi 1,t1 + stw t1,0(t0) + +dbit_nounlock_20w: +#endif + + rfir + nop +#else + +dbit_trap_11: + + get_pgd spc,ptp + + space_check spc,t0,dbit_fault + + L2_ptep ptp,pte,t0,va,dbit_fault + +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nolock_11 + load32 PA(pa_dbit_lock),t0 + +dbit_spin_11: + ldcw 0(t0),t1 + cmpib,= 0,t1,dbit_spin_11 + nop + +dbit_nolock_11: +#endif + update_dirty ptp,pte,t1 + + make_insert_tlb_11 spc,pte,prot + + mfsp %sr1,t1 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + idtlba pte,(%sr1,va) + idtlbp prot,(%sr1,va) + + mtsp t1, %sr1 /* Restore sr1 */ +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nounlock_11 + ldi 1,t1 + stw t1,0(t0) + +dbit_nounlock_11: +#endif + + rfir + nop + +dbit_trap_20: + get_pgd spc,ptp + + space_check spc,t0,dbit_fault + + L2_ptep ptp,pte,t0,va,dbit_fault + +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nolock_20 + load32 PA(pa_dbit_lock),t0 + +dbit_spin_20: + ldcw 0(t0),t1 + cmpib,= 0,t1,dbit_spin_20 + nop + +dbit_nolock_20: +#endif + update_dirty ptp,pte,t1 + + make_insert_tlb spc,pte,prot + + f_extend pte,t1 + + idtlbt pte,prot + +#ifdef CONFIG_SMP + CMPIB=,n 0,spc,dbit_nounlock_20 + ldi 1,t1 + stw t1,0(t0) + +dbit_nounlock_20: +#endif + + rfir + nop +#endif + + .import handle_interruption,code + +kernel_bad_space: + b intr_save + ldi 31,%r8 /* Use an unused code */ + +dbit_fault: + b intr_save + ldi 20,%r8 + +itlb_fault: + b intr_save + ldi 6,%r8 + +nadtlb_fault: + b intr_save + ldi 17,%r8 + +dtlb_fault: + b intr_save + ldi 15,%r8 + + /* Register saving semantics for system calls: + + %r1 clobbered by system call macro in userspace + %r2 saved in PT_REGS by gateway page + %r3 - %r18 preserved by C code (saved by signal code) + %r19 - %r20 saved in PT_REGS by gateway page + %r21 - %r22 non-standard syscall args + stored in kernel stack by gateway page + %r23 - %r26 arg3-arg0, saved in PT_REGS by gateway page + %r27 - %r30 saved in PT_REGS by gateway page + %r31 syscall return pointer + */ + + /* Floating point registers (FIXME: what do we do with these?) + + %fr0 - %fr3 status/exception, not preserved + %fr4 - %fr7 arguments + %fr8 - %fr11 not preserved by C code + %fr12 - %fr21 preserved by C code + %fr22 - %fr31 not preserved by C code + */ + + .macro reg_save regs + STREG %r3, PT_GR3(\regs) + STREG %r4, PT_GR4(\regs) + STREG %r5, PT_GR5(\regs) + STREG %r6, PT_GR6(\regs) + STREG %r7, PT_GR7(\regs) + STREG %r8, PT_GR8(\regs) + STREG %r9, PT_GR9(\regs) + STREG %r10,PT_GR10(\regs) + STREG %r11,PT_GR11(\regs) + STREG %r12,PT_GR12(\regs) + STREG %r13,PT_GR13(\regs) + STREG %r14,PT_GR14(\regs) + STREG %r15,PT_GR15(\regs) + STREG %r16,PT_GR16(\regs) + STREG %r17,PT_GR17(\regs) + STREG %r18,PT_GR18(\regs) + .endm + + .macro reg_restore regs + LDREG PT_GR3(\regs), %r3 + LDREG PT_GR4(\regs), %r4 + LDREG PT_GR5(\regs), %r5 + LDREG PT_GR6(\regs), %r6 + LDREG PT_GR7(\regs), %r7 + LDREG PT_GR8(\regs), %r8 + LDREG PT_GR9(\regs), %r9 + LDREG PT_GR10(\regs),%r10 + LDREG PT_GR11(\regs),%r11 + LDREG PT_GR12(\regs),%r12 + LDREG PT_GR13(\regs),%r13 + LDREG PT_GR14(\regs),%r14 + LDREG PT_GR15(\regs),%r15 + LDREG PT_GR16(\regs),%r16 + LDREG PT_GR17(\regs),%r17 + LDREG PT_GR18(\regs),%r18 + .endm + + .export sys_fork_wrapper + .export child_return +sys_fork_wrapper: + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 + ldo TASK_REGS(%r1),%r1 + reg_save %r1 + mfctl %cr27, %r3 + STREG %r3, PT_CR27(%r1) + + STREG %r2,-RP_OFFSET(%r30) + ldo FRAME_SIZE(%r30),%r30 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + /* These are call-clobbered registers and therefore + also syscall-clobbered (we hope). */ + STREG %r2,PT_GR19(%r1) /* save for child */ + STREG %r30,PT_GR21(%r1) + + LDREG PT_GR30(%r1),%r25 + copy %r1,%r24 + BL sys_clone,%r2 + ldi SIGCHLD,%r26 + + LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 +wrapper_exit: + ldo -FRAME_SIZE(%r30),%r30 /* get the stackframe */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r1 /* get pt regs */ + + LDREG PT_CR27(%r1), %r3 + mtctl %r3, %cr27 + reg_restore %r1 + + /* strace expects syscall # to be preserved in r20 */ + ldi __NR_fork,%r20 + bv %r0(%r2) + STREG %r20,PT_GR20(%r1) + + /* Set the return value for the child */ +child_return: + BL schedule_tail, %r2 + nop + + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE-FRAME_SIZE(%r30), %r1 + LDREG TASK_PT_GR19(%r1),%r2 + b wrapper_exit + copy %r0,%r28 + + + .export sys_clone_wrapper +sys_clone_wrapper: + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r1 /* get pt regs */ + reg_save %r1 + mfctl %cr27, %r3 + STREG %r3, PT_CR27(%r1) + + STREG %r2,-RP_OFFSET(%r30) + ldo FRAME_SIZE(%r30),%r30 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + STREG %r2,PT_GR19(%r1) /* save for child */ + STREG %r30,PT_GR21(%r1) + BL sys_clone,%r2 + copy %r1,%r24 + + b wrapper_exit + LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 + + .export sys_vfork_wrapper +sys_vfork_wrapper: + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r1 /* get pt regs */ + reg_save %r1 + mfctl %cr27, %r3 + STREG %r3, PT_CR27(%r1) + + STREG %r2,-RP_OFFSET(%r30) + ldo FRAME_SIZE(%r30),%r30 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + STREG %r2,PT_GR19(%r1) /* save for child */ + STREG %r30,PT_GR21(%r1) + + BL sys_vfork,%r2 + copy %r1,%r26 + + b wrapper_exit + LDREG -RP_OFFSET-FRAME_SIZE(%r30),%r2 + + + .macro execve_wrapper execve + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r1 /* get pt regs */ + + /* + * Do we need to save/restore r3-r18 here? + * I don't think so. why would new thread need old + * threads registers? + */ + + /* %arg0 - %arg3 are already saved for us. */ + + STREG %r2,-RP_OFFSET(%r30) + ldo FRAME_SIZE(%r30),%r30 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + bl \execve,%r2 + copy %r1,%arg0 + + ldo -FRAME_SIZE(%r30),%r30 + LDREG -RP_OFFSET(%r30),%r2 + + /* If exec succeeded we need to load the args */ + + ldo -1024(%r0),%r1 + cmpb,>>= %r28,%r1,error_\execve + copy %r2,%r19 + +error_\execve: + bv %r0(%r19) + nop + .endm + + .export sys_execve_wrapper + .import sys_execve + +sys_execve_wrapper: + execve_wrapper sys_execve + +#ifdef __LP64__ + .export sys32_execve_wrapper + .import sys32_execve + +sys32_execve_wrapper: + execve_wrapper sys32_execve +#endif + + .export sys_rt_sigreturn_wrapper +sys_rt_sigreturn_wrapper: + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 + ldo TASK_REGS(%r26),%r26 /* get pt regs */ + /* Don't save regs, we are going to restore them from sigcontext. */ + STREG %r2, -RP_OFFSET(%r30) +#ifdef __LP64__ + ldo FRAME_SIZE(%r30), %r30 + BL sys_rt_sigreturn,%r2 + ldo -16(%r30),%r29 /* Reference param save area */ +#else + BL sys_rt_sigreturn,%r2 + ldo FRAME_SIZE(%r30), %r30 +#endif + + ldo -FRAME_SIZE(%r30), %r30 + LDREG -RP_OFFSET(%r30), %r2 + + /* FIXME: I think we need to restore a few more things here. */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r1 /* get pt regs */ + reg_restore %r1 + + /* If the signal was received while the process was blocked on a + * syscall, then r2 will take us to syscall_exit; otherwise r2 will + * take us to syscall_exit_rfi and on to intr_return. + */ + bv %r0(%r2) + LDREG PT_GR28(%r1),%r28 /* reload original r28 for syscall_exit */ + + .export sys_sigaltstack_wrapper +sys_sigaltstack_wrapper: + /* Get the user stack pointer */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1),%r24 /* get pt regs */ + LDREG TASK_PT_GR30(%r24),%r24 + STREG %r2, -RP_OFFSET(%r30) +#ifdef __LP64__ + ldo FRAME_SIZE(%r30), %r30 + b,l do_sigaltstack,%r2 + ldo -16(%r30),%r29 /* Reference param save area */ +#else + bl do_sigaltstack,%r2 + ldo FRAME_SIZE(%r30), %r30 +#endif + + ldo -FRAME_SIZE(%r30), %r30 + LDREG -RP_OFFSET(%r30), %r2 + bv %r0(%r2) + nop + +#ifdef __LP64__ + .export sys32_sigaltstack_wrapper +sys32_sigaltstack_wrapper: + /* Get the user stack pointer */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r24 + LDREG TASK_PT_GR30(%r24),%r24 + STREG %r2, -RP_OFFSET(%r30) + ldo FRAME_SIZE(%r30), %r30 + b,l do_sigaltstack32,%r2 + ldo -16(%r30),%r29 /* Reference param save area */ + + ldo -FRAME_SIZE(%r30), %r30 + LDREG -RP_OFFSET(%r30), %r2 + bv %r0(%r2) + nop +#endif + + .export sys_rt_sigsuspend_wrapper +sys_rt_sigsuspend_wrapper: + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 + ldo TASK_REGS(%r1),%r24 + reg_save %r24 + + STREG %r2, -RP_OFFSET(%r30) +#ifdef __LP64__ + ldo FRAME_SIZE(%r30), %r30 + b,l sys_rt_sigsuspend,%r2 + ldo -16(%r30),%r29 /* Reference param save area */ +#else + bl sys_rt_sigsuspend,%r2 + ldo FRAME_SIZE(%r30), %r30 +#endif + + ldo -FRAME_SIZE(%r30), %r30 + LDREG -RP_OFFSET(%r30), %r2 + + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1 + ldo TASK_REGS(%r1),%r1 + reg_restore %r1 + + bv %r0(%r2) + nop + + .export syscall_exit +syscall_exit: + + /* NOTE: HP-UX syscalls also come through here + * after hpux_syscall_exit fixes up return + * values. */ + + /* NOTE: Not all syscalls exit this way. rt_sigreturn will exit + * via syscall_exit_rfi if the signal was received while the process + * was running. + */ + + /* save return value now */ + + mfctl %cr30, %r1 + LDREG TI_TASK(%r1),%r1 + STREG %r28,TASK_PT_GR28(%r1) + +#ifdef CONFIG_HPUX + +/* cannot be easily included */ +#define PER_HPUX 0x10 + LDREG TASK_PERSONALITY(%r1),%r19 + + /* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */ + ldo -PER_HPUX(%r19), %r19 + CMPIB<>,n 0,%r19,1f + + /* Save other hpux returns if personality is PER_HPUX */ + STREG %r22,TASK_PT_GR22(%r1) + STREG %r29,TASK_PT_GR29(%r1) +1: + +#endif /* CONFIG_HPUX */ + + /* Seems to me that dp could be wrong here, if the syscall involved + * calling a module, and nothing got round to restoring dp on return. + */ + loadgp + +syscall_check_bh: + + /* Check for software interrupts */ + + .import irq_stat,data + + load32 irq_stat,%r19 + +#ifdef CONFIG_SMP + /* sched.h: int processor */ + /* %r26 is used as scratch register to index into irq_stat[] */ + ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ + + /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ +#ifdef __LP64__ + shld %r26, 6, %r20 +#else + shlw %r26, 5, %r20 +#endif + add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ +#endif /* CONFIG_SMP */ + + LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ + cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */ + +syscall_check_resched: + + /* check for reschedule */ + + LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19 /* long */ + bb,<,n %r19, 31-TIF_NEED_RESCHED, syscall_do_resched /* forward */ + +syscall_check_sig: + LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19 /* get ti flags */ + bb,<,n %r19, 31-TIF_SIGPENDING, syscall_do_signal /* forward */ + +syscall_restore: + /* Are we being ptraced? */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + + LDREG TASK_PTRACE(%r1), %r19 + bb,< %r19,31,syscall_restore_rfi + nop + + ldo TASK_PT_FR31(%r1),%r19 /* reload fpregs */ + rest_fp %r19 + + LDREG TASK_PT_SAR(%r1),%r19 /* restore SAR */ + mtsar %r19 + + LDREG TASK_PT_GR2(%r1),%r2 /* restore user rp */ + LDREG TASK_PT_GR19(%r1),%r19 + LDREG TASK_PT_GR20(%r1),%r20 + LDREG TASK_PT_GR21(%r1),%r21 + LDREG TASK_PT_GR22(%r1),%r22 + LDREG TASK_PT_GR23(%r1),%r23 + LDREG TASK_PT_GR24(%r1),%r24 + LDREG TASK_PT_GR25(%r1),%r25 + LDREG TASK_PT_GR26(%r1),%r26 + LDREG TASK_PT_GR27(%r1),%r27 /* restore user dp */ + LDREG TASK_PT_GR28(%r1),%r28 /* syscall return value */ + LDREG TASK_PT_GR29(%r1),%r29 + LDREG TASK_PT_GR31(%r1),%r31 /* restore syscall rp */ + + /* NOTE: We use rsm/ssm pair to make this operation atomic */ + rsm PSW_SM_I, %r0 + LDREG TASK_PT_GR30(%r1),%r30 /* restore user sp */ + mfsp %sr3,%r1 /* Get users space id */ + mtsp %r1,%sr7 /* Restore sr7 */ + ssm PSW_SM_I, %r0 + + /* Set sr2 to zero for userspace syscalls to work. */ + mtsp %r0,%sr2 + mtsp %r1,%sr4 /* Restore sr4 */ + mtsp %r1,%sr5 /* Restore sr5 */ + mtsp %r1,%sr6 /* Restore sr6 */ + + depi 3,31,2,%r31 /* ensure return to user mode. */ + +#ifdef __LP64__ + /* decide whether to reset the wide mode bit + * + * For a syscall, the W bit is stored in the lowest bit + * of sp. Extract it and reset W if it is zero */ + extrd,u,*<> %r30,63,1,%r1 + rsm PSW_SM_W, %r0 + /* now reset the lowest bit of sp if it was set */ + xor %r30,%r1,%r30 +#endif + be,n 0(%sr3,%r31) /* return to user space */ + + /* We have to return via an RFI, so that PSW T and R bits can be set + * appropriately. + * This sets up pt_regs so we can return via intr_restore, which is not + * the most efficient way of doing things, but it works. + */ +syscall_restore_rfi: + ldo -1(%r0),%r2 /* Set recovery cntr to -1 */ + mtctl %r2,%cr0 /* for immediate trap */ + LDREG TASK_PT_PSW(%r1),%r2 /* Get old PSW */ + ldi 0x0b,%r20 /* Create new PSW */ + depi -1,13,1,%r20 /* C, Q, D, and I bits */ + + /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are + * set in include/linux/ptrace.h and converted to PA bitmap + * numbers in asm-offsets.c */ + + /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */ + extru,= %r19,PA_SINGLESTEP_BIT,1,%r0 + depi -1,27,1,%r20 /* R bit */ + + /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */ + extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0 + depi -1,7,1,%r20 /* T bit */ + + STREG %r20,TASK_PT_PSW(%r1) + + /* Always store space registers, since sr3 can be changed (e.g. fork) */ + + mfsp %sr3,%r25 + STREG %r25,TASK_PT_SR3(%r1) + STREG %r25,TASK_PT_SR4(%r1) + STREG %r25,TASK_PT_SR5(%r1) + STREG %r25,TASK_PT_SR6(%r1) + STREG %r25,TASK_PT_SR7(%r1) + STREG %r25,TASK_PT_IASQ0(%r1) + STREG %r25,TASK_PT_IASQ1(%r1) + + /* XXX W bit??? */ + /* Now if old D bit is clear, it means we didn't save all registers + * on syscall entry, so do that now. This only happens on TRACEME + * calls, or if someone attached to us while we were on a syscall. + * We could make this more efficient by not saving r3-r18, but + * then we wouldn't be able to use the common intr_restore path. + * It is only for traced processes anyway, so performance is not + * an issue. + */ + bb,< %r2,30,pt_regs_ok /* Branch if D set */ + ldo TASK_REGS(%r1),%r25 + reg_save %r25 /* Save r3 to r18 */ + + /* Save the current sr */ + mfsp %sr0,%r2 + STREG %r2,TASK_PT_SR0(%r1) + + /* Save the scratch sr */ + mfsp %sr1,%r2 + STREG %r2,TASK_PT_SR1(%r1) + + /* sr2 should be set to zero for userspace syscalls */ + STREG %r0,TASK_PT_SR2(%r1) + +pt_regs_ok: + LDREG TASK_PT_GR31(%r1),%r2 + depi 3,31,2,%r2 /* ensure return to user mode. */ + STREG %r2,TASK_PT_IAOQ0(%r1) + ldo 4(%r2),%r2 + STREG %r2,TASK_PT_IAOQ1(%r1) + copy %r25,%r16 + b intr_restore + nop + + .import do_softirq,code +syscall_do_softirq: + bl do_softirq,%r2 + nop + /* NOTE: We enable I-bit incase we schedule later, + * and we might be going back to userspace if we were + * traced. */ + b syscall_check_resched + ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */ + + .import schedule,code +syscall_do_resched: + BL schedule,%r2 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#else + nop +#endif + b syscall_check_bh /* if resched, we start over again */ + nop + + .import do_signal,code +syscall_do_signal: + /* Save callee-save registers (for sigcontext). + FIXME: After this point the process structure should be + consistent with all the relevant state of the process + before the syscall. We need to verify this. */ + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1), %r25 /* struct pt_regs *regs */ + reg_save %r25 + + ldi 1, %r24 /* unsigned long in_syscall */ + +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + BL do_signal,%r2 + copy %r0, %r26 /* sigset_t *oldset = NULL */ + + LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 + ldo TASK_REGS(%r1), %r20 /* reload pt_regs */ + reg_restore %r20 + + b,n syscall_check_sig + + /* + * get_register is used by the non access tlb miss handlers to + * copy the value of the general register specified in r8 into + * r1. This routine can't be used for shadowed registers, since + * the rfir will restore the original value. So, for the shadowed + * registers we put a -1 into r1 to indicate that the register + * should not be used (the register being copied could also have + * a -1 in it, but that is OK, it just means that we will have + * to use the slow path instead). + */ + +get_register: + blr %r8,%r0 + nop + bv %r0(%r25) /* r0 */ + copy %r0,%r1 + bv %r0(%r25) /* r1 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r2 */ + copy %r2,%r1 + bv %r0(%r25) /* r3 */ + copy %r3,%r1 + bv %r0(%r25) /* r4 */ + copy %r4,%r1 + bv %r0(%r25) /* r5 */ + copy %r5,%r1 + bv %r0(%r25) /* r6 */ + copy %r6,%r1 + bv %r0(%r25) /* r7 */ + copy %r7,%r1 + bv %r0(%r25) /* r8 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r9 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r10 */ + copy %r10,%r1 + bv %r0(%r25) /* r11 */ + copy %r11,%r1 + bv %r0(%r25) /* r12 */ + copy %r12,%r1 + bv %r0(%r25) /* r13 */ + copy %r13,%r1 + bv %r0(%r25) /* r14 */ + copy %r14,%r1 + bv %r0(%r25) /* r15 */ + copy %r15,%r1 + bv %r0(%r25) /* r16 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r17 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r18 */ + copy %r18,%r1 + bv %r0(%r25) /* r19 */ + copy %r19,%r1 + bv %r0(%r25) /* r20 */ + copy %r20,%r1 + bv %r0(%r25) /* r21 */ + copy %r21,%r1 + bv %r0(%r25) /* r22 */ + copy %r22,%r1 + bv %r0(%r25) /* r23 */ + copy %r23,%r1 + bv %r0(%r25) /* r24 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r25 - shadowed */ + ldi -1,%r1 + bv %r0(%r25) /* r26 */ + copy %r26,%r1 + bv %r0(%r25) /* r27 */ + copy %r27,%r1 + bv %r0(%r25) /* r28 */ + copy %r28,%r1 + bv %r0(%r25) /* r29 */ + copy %r29,%r1 + bv %r0(%r25) /* r30 */ + copy %r30,%r1 + bv %r0(%r25) /* r31 */ + copy %r31,%r1 + + /* + * set_register is used by the non access tlb miss handlers to + * copy the value of r1 into the general register specified in + * r8. + */ + +set_register: + blr %r8,%r0 + nop + bv %r0(%r25) /* r0 (silly, but it is a place holder) */ + copy %r1,%r0 + bv %r0(%r25) /* r1 */ + copy %r1,%r1 + bv %r0(%r25) /* r2 */ + copy %r1,%r2 + bv %r0(%r25) /* r3 */ + copy %r1,%r3 + bv %r0(%r25) /* r4 */ + copy %r1,%r4 + bv %r0(%r25) /* r5 */ + copy %r1,%r5 + bv %r0(%r25) /* r6 */ + copy %r1,%r6 + bv %r0(%r25) /* r7 */ + copy %r1,%r7 + bv %r0(%r25) /* r8 */ + copy %r1,%r8 + bv %r0(%r25) /* r9 */ + copy %r1,%r9 + bv %r0(%r25) /* r10 */ + copy %r1,%r10 + bv %r0(%r25) /* r11 */ + copy %r1,%r11 + bv %r0(%r25) /* r12 */ + copy %r1,%r12 + bv %r0(%r25) /* r13 */ + copy %r1,%r13 + bv %r0(%r25) /* r14 */ + copy %r1,%r14 + bv %r0(%r25) /* r15 */ + copy %r1,%r15 + bv %r0(%r25) /* r16 */ + copy %r1,%r16 + bv %r0(%r25) /* r17 */ + copy %r1,%r17 + bv %r0(%r25) /* r18 */ + copy %r1,%r18 + bv %r0(%r25) /* r19 */ + copy %r1,%r19 + bv %r0(%r25) /* r20 */ + copy %r1,%r20 + bv %r0(%r25) /* r21 */ + copy %r1,%r21 + bv %r0(%r25) /* r22 */ + copy %r1,%r22 + bv %r0(%r25) /* r23 */ + copy %r1,%r23 + bv %r0(%r25) /* r24 */ + copy %r1,%r24 + bv %r0(%r25) /* r25 */ + copy %r1,%r25 + bv %r0(%r25) /* r26 */ + copy %r1,%r26 + bv %r0(%r25) /* r27 */ + copy %r1,%r27 + bv %r0(%r25) /* r28 */ + copy %r1,%r28 + bv %r0(%r25) /* r29 */ + copy %r1,%r29 + bv %r0(%r25) /* r30 */ + copy %r1,%r30 + bv %r0(%r25) /* r31 */ + copy %r1,%r31 diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c new file mode 100644 index 000000000000..f244fb200db1 --- /dev/null +++ b/arch/parisc/kernel/firmware.c @@ -0,0 +1,1405 @@ +/* + * arch/parisc/kernel/firmware.c - safe PDC access routines + * + * PDC == Processor Dependent Code + * + * See http://www.parisc-linux.org/documentation/index.html + * for documentation describing the entry points and calling + * conventions defined below. + * + * Copyright 1999 SuSE GmbH Nuernberg (Philipp Rumpf, prumpf@tux.org) + * Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy) + * Copyright 2003 Grant Grundler + * Copyright 2003,2004 Ryan Bradetich + * Copyright 2004 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* I think it would be in everyone's best interest to follow this + * guidelines when writing PDC wrappers: + * + * - the name of the pdc wrapper should match one of the macros + * used for the first two arguments + * - don't use caps for random parts of the name + * - use the static PDC result buffers and "copyout" to structs + * supplied by the caller to encapsulate alignment restrictions + * - hold pdc_lock while in PDC or using static result buffers + * - use __pa() to convert virtual (kernel) pointers to physical + * ones. + * - the name of the struct used for pdc return values should equal + * one of the macros used for the first two arguments to the + * corresponding PDC call + * - keep the order of arguments + * - don't be smart (setting trailing NUL bytes for strings, return + * something useful even if the call failed) unless you are sure + * it's not going to affect functionality or performance + * + * Example: + * int pdc_cache_info(struct pdc_cache_info *cache_info ) + * { + * int retval; + * + * spin_lock_irq(&pdc_lock); + * retval = mem_pdc_call(PDC_CACHE,PDC_CACHE_INFO,__pa(cache_info),0); + * convert_to_wide(pdc_result); + * memcpy(cache_info, pdc_result, sizeof(*cache_info)); + * spin_unlock_irq(&pdc_lock); + * + * return retval; + * } + * prumpf 991016 + */ + +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include /* for boot_cpu_data */ + +static DEFINE_SPINLOCK(pdc_lock); +static unsigned long pdc_result[32] __attribute__ ((aligned (8))); +static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); + +#ifdef __LP64__ +#define WIDE_FIRMWARE 0x1 +#define NARROW_FIRMWARE 0x2 + +/* Firmware needs to be initially set to narrow to determine the + * actual firmware width. */ +int parisc_narrow_firmware = 1; +#endif + +/* on all currently-supported platforms, IODC I/O calls are always + * 32-bit calls, and MEM_PDC calls are always the same width as the OS. + * This means Cxxx boxes can't run wide kernels right now. -PB + * + * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on + * systems with 32-bit MEM_PDC calls. This will allow wide kernels to + * run on Cxxx boxes now. -RB + * + * Note that some PAT boxes may have 64-bit IODC I/O... + */ + +#ifdef __LP64__ +long real64_call(unsigned long function, ...); +#endif +long real32_call(unsigned long function, ...); + +#ifdef __LP64__ +# define MEM_PDC (unsigned long)(PAGE0->mem_pdc_hi) << 32 | PAGE0->mem_pdc +# define mem_pdc_call(args...) unlikely(parisc_narrow_firmware) ? real32_call(MEM_PDC, args) : real64_call(MEM_PDC, args) +#else +# define MEM_PDC (unsigned long)PAGE0->mem_pdc +# define mem_pdc_call(args...) real32_call(MEM_PDC, args) +#endif + + +/** + * f_extend - Convert PDC addresses to kernel addresses. + * @address: Address returned from PDC. + * + * This function is used to convert PDC addresses into kernel addresses + * when the PDC address size and kernel address size are different. + */ +static unsigned long f_extend(unsigned long address) +{ +#ifdef __LP64__ + if(unlikely(parisc_narrow_firmware)) { + if((address & 0xff000000) == 0xf0000000) + return 0xf0f0f0f000000000UL | (u32)address; + + if((address & 0xf0000000) == 0xf0000000) + return 0xffffffff00000000UL | (u32)address; + } +#endif + return address; +} + +/** + * convert_to_wide - Convert the return buffer addresses into kernel addresses. + * @address: The return buffer from PDC. + * + * This function is used to convert the return buffer addresses retrieved from PDC + * into kernel addresses when the PDC address size and kernel address size are + * different. + */ +static void convert_to_wide(unsigned long *addr) +{ +#ifdef __LP64__ + int i; + unsigned int *p = (unsigned int *)addr; + + if(unlikely(parisc_narrow_firmware)) { + for(i = 31; i >= 0; --i) + addr[i] = p[i]; + } +#endif +} + +/** + * set_firmware_width - Determine if the firmware is wide or narrow. + * + * This function must be called before any pdc_* function that uses the convert_to_wide + * function. + */ +void __init set_firmware_width(void) +{ +#ifdef __LP64__ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + if(pdc_result[0] != NARROW_FIRMWARE) + parisc_narrow_firmware = 0; + spin_unlock_irq(&pdc_lock); +#endif +} + +/** + * pdc_emergency_unlock - Unlock the linux pdc lock + * + * This call unlocks the linux pdc lock in case we need some PDC functions + * (like pdc_add_valid) during kernel stack dump. + */ +void pdc_emergency_unlock(void) +{ + /* Spinlock DEBUG code freaks out if we unconditionally unlock */ + if (spin_is_locked(&pdc_lock)) + spin_unlock(&pdc_lock); +} + + +/** + * pdc_add_valid - Verify address can be accessed without causing a HPMC. + * @address: Address to be verified. + * + * This PDC call attempts to read from the specified address and verifies + * if the address is valid. + * + * The return value is PDC_OK (0) in case accessing this address is valid. + */ +int pdc_add_valid(unsigned long address) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_ADD_VALID, PDC_ADD_VALID_VERIFY, address); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_add_valid); + +/** + * pdc_chassis_info - Return chassis information. + * @result: The return buffer. + * @chassis_info: The memory buffer address. + * @len: The size of the memory buffer address. + * + * An HVERSION dependent call for returning the chassis information. + */ +int __init pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(&pdc_result, chassis_info, sizeof(*chassis_info)); + memcpy(&pdc_result2, led_info, len); + retval = mem_pdc_call(PDC_CHASSIS, PDC_RETURN_CHASSIS_INFO, + __pa(pdc_result), __pa(pdc_result2), len); + memcpy(chassis_info, pdc_result, sizeof(*chassis_info)); + memcpy(led_info, pdc_result2, len); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_chassis_send_log - Sends a PDC PAT CHASSIS log message. + * @retval: -1 on error, 0 on success. Other value are PDC errors + * + * Must be correctly formatted or expect system crash + */ +#ifdef __LP64__ +int pdc_pat_chassis_send_log(unsigned long state, unsigned long data) +{ + int retval = 0; + + if (!is_pdc_pat()) + return -1; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CHASSIS_LOG, PDC_PAT_CHASSIS_WRITE_LOG, __pa(&state), __pa(&data)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif + +/** + * pdc_chassis_disp - Updates display + * @retval: -1 on error, 0 on success + * + * Works on old PDC only (E class, others?) + */ +int pdc_chassis_disp(unsigned long disp) +{ + int retval = 0; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_DISP, disp); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_coproc_cfg - To identify coprocessors attached to the processor. + * @pdc_coproc_info: Return buffer address. + * + * This PDC call returns the presence and status of all the coprocessors + * attached to the processor. + */ +int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result)); + convert_to_wide(pdc_result); + pdc_coproc_info->ccr_functional = pdc_result[0]; + pdc_coproc_info->ccr_present = pdc_result[1]; + pdc_coproc_info->revision = pdc_result[17]; + pdc_coproc_info->model = pdc_result[18]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_iodc_read - Read data from the modules IODC. + * @actcnt: The actual number of bytes. + * @hpa: The HPA of the module for the iodc read. + * @index: The iodc entry point. + * @iodc_data: A buffer memory for the iodc options. + * @iodc_data_size: Size of the memory buffer. + * + * This PDC call reads from the IODC of the module specified by the hpa + * argument. + */ +int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index, + void *iodc_data, unsigned int iodc_data_size) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_IODC, PDC_IODC_READ, __pa(pdc_result), hpa, + index, __pa(pdc_result2), iodc_data_size); + convert_to_wide(pdc_result); + *actcnt = pdc_result[0]; + memcpy(iodc_data, pdc_result2, iodc_data_size); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_iodc_read); + +/** + * pdc_system_map_find_mods - Locate unarchitected modules. + * @pdc_mod_info: Return buffer address. + * @mod_path: pointer to dev path structure. + * @mod_index: fixed address module index. + * + * To locate and identify modules which reside at fixed I/O addresses, which + * do not self-identify via architected bus walks. + */ +int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info, + struct pdc_module_path *mod_path, long mod_index) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result), + __pa(pdc_result2), mod_index); + convert_to_wide(pdc_result); + memcpy(pdc_mod_info, pdc_result, sizeof(*pdc_mod_info)); + memcpy(mod_path, pdc_result2, sizeof(*mod_path)); + spin_unlock_irq(&pdc_lock); + + pdc_mod_info->mod_addr = f_extend(pdc_mod_info->mod_addr); + return retval; +} + +/** + * pdc_system_map_find_addrs - Retrieve additional address ranges. + * @pdc_addr_info: Return buffer address. + * @mod_index: Fixed address module index. + * @addr_index: Address range index. + * + * Retrieve additional information about subsequent address ranges for modules + * with multiple address ranges. + */ +int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, + long mod_index, long addr_index) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_ADDRESS, __pa(pdc_result), + mod_index, addr_index); + convert_to_wide(pdc_result); + memcpy(pdc_addr_info, pdc_result, sizeof(*pdc_addr_info)); + spin_unlock_irq(&pdc_lock); + + pdc_addr_info->mod_addr = f_extend(pdc_addr_info->mod_addr); + return retval; +} + +/** + * pdc_model_info - Return model information about the processor. + * @model: The return buffer. + * + * Returns the version numbers, identifiers, and capabilities from the processor module. + */ +int pdc_model_info(struct pdc_model *model) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_INFO, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(model, pdc_result, sizeof(*model)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_sysmodel - Get the system model name. + * @name: A char array of at least 81 characters. + * + * Get system model name from PDC ROM (e.g. 9000/715 or 9000/778/B160L) + */ +int pdc_model_sysmodel(char *name) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_SYSMODEL, __pa(pdc_result), + OS_ID_HPUX, __pa(name)); + convert_to_wide(pdc_result); + + if (retval == PDC_OK) { + name[pdc_result[0]] = '\0'; /* add trailing '\0' */ + } else { + name[0] = 0; + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_versions - Identify the version number of each processor. + * @cpu_id: The return buffer. + * @id: The id of the processor to check. + * + * Returns the version number for each processor component. + * + * This comment was here before, but I do not know what it means :( -RB + * id: 0 = cpu revision, 1 = boot-rom-version + */ +int pdc_model_versions(unsigned long *versions, int id) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_VERSIONS, __pa(pdc_result), id); + convert_to_wide(pdc_result); + *versions = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_cpuid - Returns the CPU_ID. + * @cpu_id: The return buffer. + * + * Returns the CPU_ID value which uniquely identifies the cpu portion of + * the processor module. + */ +int pdc_model_cpuid(unsigned long *cpu_id) +{ + int retval; + + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; /* preset zero (call may not be implemented!) */ + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CPU_ID, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + *cpu_id = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_capabilities - Returns the platform capabilities. + * @capabilities: The return buffer. + * + * Returns information about platform support for 32- and/or 64-bit + * OSes, IO-PDIR coherency, and virtual aliasing. + */ +int pdc_model_capabilities(unsigned long *capabilities) +{ + int retval; + + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; /* preset zero (call may not be implemented!) */ + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + *capabilities = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_cache_info - Return cache and TLB information. + * @cache_info: The return buffer. + * + * Returns information about the processor's cache and TLB. + */ +int pdc_cache_info(struct pdc_cache_info *cache_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_CACHE, PDC_CACHE_INFO, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(cache_info, pdc_result, sizeof(*cache_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +#ifndef CONFIG_PA20 +/** + * pdc_btlb_info - Return block TLB information. + * @btlb: The return buffer. + * + * Returns information about the hardware Block TLB. + */ +int pdc_btlb_info(struct pdc_btlb_info *btlb) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BLOCK_TLB, PDC_BTLB_INFO, __pa(pdc_result), 0); + memcpy(btlb, pdc_result, sizeof(*btlb)); + spin_unlock_irq(&pdc_lock); + + if(retval < 0) { + btlb->max_size = 0; + } + return retval; +} + +/** + * pdc_mem_map_hpa - Find fixed module information. + * @address: The return buffer + * @mod_path: pointer to dev path structure. + * + * This call was developed for S700 workstations to allow the kernel to find + * the I/O devices (Core I/O). In the future (Kittyhawk and beyond) this + * call will be replaced (on workstations) by the architected PDC_SYSTEM_MAP + * call. + * + * This call is supported by all existing S700 workstations (up to Gecko). + */ +int pdc_mem_map_hpa(struct pdc_memory_map *address, + struct pdc_module_path *mod_path) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(pdc_result2, mod_path, sizeof(*mod_path)); + retval = mem_pdc_call(PDC_MEM_MAP, PDC_MEM_MAP_HPA, __pa(pdc_result), + __pa(pdc_result2)); + memcpy(address, pdc_result, sizeof(*address)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* !CONFIG_PA20 */ + +/** + * pdc_lan_station_id - Get the LAN address. + * @lan_addr: The return buffer. + * @hpa: The network device HPA. + * + * Get the LAN station address when it is not directly available from the LAN hardware. + */ +int pdc_lan_station_id(char *lan_addr, unsigned long hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_LAN_STATION_ID, PDC_LAN_STATION_ID_READ, + __pa(pdc_result), hpa); + if (retval < 0) { + /* FIXME: else read MAC from NVRAM */ + memset(lan_addr, 0, PDC_LAN_STATION_ID_SIZE); + } else { + memcpy(lan_addr, pdc_result, PDC_LAN_STATION_ID_SIZE); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_lan_station_id); + +/** + * pdc_stable_read - Read data from Stable Storage. + * @staddr: Stable Storage address to access. + * @memaddr: The memory address where Stable Storage data shall be copied. + * @count: number of bytes to transfert. count is multiple of 4. + * + * This PDC call reads from the Stable Storage address supplied in staddr + * and copies count bytes to the memory address memaddr. + * The call will fail if staddr+count > PDC_STABLE size. + */ +int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_READ, staddr, + __pa(pdc_result), count); + convert_to_wide(pdc_result); + memcpy(memaddr, pdc_result, count); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_read); + +/** + * pdc_stable_write - Write data to Stable Storage. + * @staddr: Stable Storage address to access. + * @memaddr: The memory address where Stable Storage data shall be read from. + * @count: number of bytes to transfert. count is multiple of 4. + * + * This PDC call reads count bytes from the supplied memaddr address, + * and copies count bytes to the Stable Storage address staddr. + * The call will fail if staddr+count > PDC_STABLE size. + */ +int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(pdc_result, memaddr, count); + convert_to_wide(pdc_result); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_WRITE, staddr, + __pa(pdc_result), count); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_write); + +/** + * pdc_stable_get_size - Get Stable Storage size in bytes. + * @size: pointer where the size will be stored. + * + * This PDC call returns the number of bytes in the processor's Stable + * Storage, which is the number of contiguous bytes implemented in Stable + * Storage starting from staddr=0. size in an unsigned 64-bit integer + * which is a multiple of four. + */ +int pdc_stable_get_size(unsigned long *size) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_RETURN_SIZE, __pa(pdc_result)); + *size = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_get_size); + +/** + * pdc_stable_verify_contents - Checks that Stable Storage contents are valid. + * + * This PDC call is meant to be used to check the integrity of the current + * contents of Stable Storage. + */ +int pdc_stable_verify_contents(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_VERIFY_CONTENTS); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_verify_contents); + +/** + * pdc_stable_initialize - Sets Stable Storage contents to zero and initialize + * the validity indicator. + * + * This PDC call will erase all contents of Stable Storage. Use with care! + */ +int pdc_stable_initialize(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_INITIALIZE); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_initialize); + +/** + * pdc_get_initiator - Get the SCSI Interface Card params (SCSI ID, SDTR, SE or LVD) + * @hwpath: fully bc.mod style path to the device. + * @initiator: the array to return the result into + * + * Get the SCSI operational parameters from PDC. + * Needed since HPUX never used BIOS or symbios card NVRAM. + * Most ncr/sym cards won't have an entry and just use whatever + * capabilities of the card are (eg Ultra, LVD). But there are + * several cases where it's useful: + * o set SCSI id for Multi-initiator clusters, + * o cable too long (ie SE scsi 10Mhz won't support 6m length), + * o bus width exported is less than what the interface chip supports. + */ +int pdc_get_initiator(struct hardware_path *hwpath, struct pdc_initiator *initiator) +{ + int retval; + + spin_lock_irq(&pdc_lock); + +/* BCJ-XXXX series boxes. E.G. "9000/785/C3000" */ +#define IS_SPROCKETS() (strlen(boot_cpu_data.pdc.sys_model_name) == 14 && \ + strncmp(boot_cpu_data.pdc.sys_model_name, "9000/785", 8) == 0) + + retval = mem_pdc_call(PDC_INITIATOR, PDC_GET_INITIATOR, + __pa(pdc_result), __pa(hwpath)); + if (retval < PDC_OK) + goto out; + + if (pdc_result[0] < 16) { + initiator->host_id = pdc_result[0]; + } else { + initiator->host_id = -1; + } + + /* + * Sprockets and Piranha return 20 or 40 (MT/s). Prelude returns + * 1, 2, 5 or 10 for 5, 10, 20 or 40 MT/s, respectively + */ + switch (pdc_result[1]) { + case 1: initiator->factor = 50; break; + case 2: initiator->factor = 25; break; + case 5: initiator->factor = 12; break; + case 25: initiator->factor = 10; break; + case 20: initiator->factor = 12; break; + case 40: initiator->factor = 10; break; + default: initiator->factor = -1; break; + } + + if (IS_SPROCKETS()) { + initiator->width = pdc_result[4]; + initiator->mode = pdc_result[5]; + } else { + initiator->width = -1; + initiator->mode = -1; + } + + out: + spin_unlock_irq(&pdc_lock); + return (retval >= PDC_OK); +} +EXPORT_SYMBOL(pdc_get_initiator); + + +/** + * pdc_pci_irt_size - Get the number of entries in the interrupt routing table. + * @num_entries: The return value. + * @hpa: The HPA for the device. + * + * This PDC function returns the number of entries in the specified cell's + * interrupt table. + * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes + */ +int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL_SIZE, + __pa(pdc_result), hpa); + convert_to_wide(pdc_result); + *num_entries = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pci_irt - Get the PCI interrupt routing table. + * @num_entries: The number of entries in the table. + * @hpa: The Hard Physical Address of the device. + * @tbl: + * + * Get the PCI interrupt routing table for the device at the given HPA. + * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes + */ +int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl) +{ + int retval; + + BUG_ON((unsigned long)tbl & 0x7); + + spin_lock_irq(&pdc_lock); + pdc_result[0] = num_entries; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL, + __pa(pdc_result), hpa, __pa(tbl)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + + +#if 0 /* UNTEST CODE - left here in case someone needs it */ + +/** + * pdc_pci_config_read - read PCI config space. + * @hpa token from PDC to indicate which PCI device + * @pci_addr configuration space address to read from + * + * Read PCI Configuration space *before* linux PCI subsystem is running. + */ +unsigned int pdc_pci_config_read(void *hpa, unsigned long cfg_addr) +{ + int retval; + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; + pdc_result[1] = 0; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_READ_CONFIG, + __pa(pdc_result), hpa, cfg_addr&~3UL, 4UL); + spin_unlock_irq(&pdc_lock); + return retval ? ~0 : (unsigned int) pdc_result[0]; +} + + +/** + * pdc_pci_config_write - read PCI config space. + * @hpa token from PDC to indicate which PCI device + * @pci_addr configuration space address to write + * @val value we want in the 32-bit register + * + * Write PCI Configuration space *before* linux PCI subsystem is running. + */ +void pdc_pci_config_write(void *hpa, unsigned long cfg_addr, unsigned int val) +{ + int retval; + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_WRITE_CONFIG, + __pa(pdc_result), hpa, + cfg_addr&~3UL, 4UL, (unsigned long) val); + spin_unlock_irq(&pdc_lock); + return retval; +} +#endif /* UNTESTED CODE */ + +/** + * pdc_tod_read - Read the Time-Of-Day clock. + * @tod: The return buffer: + * + * Read the Time-Of-Day clock + */ +int pdc_tod_read(struct pdc_tod *tod) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_TOD, PDC_TOD_READ, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(tod, pdc_result, sizeof(*tod)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_tod_read); + +/** + * pdc_tod_set - Set the Time-Of-Day clock. + * @sec: The number of seconds since epoch. + * @usec: The number of micro seconds. + * + * Set the Time-Of-Day clock. + */ +int pdc_tod_set(unsigned long sec, unsigned long usec) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_TOD, PDC_TOD_WRITE, sec, usec); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_tod_set); + +#ifdef __LP64__ +int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, + struct pdc_memory_table *tbl, unsigned long entries) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MEM, PDC_MEM_TABLE, __pa(pdc_result), __pa(pdc_result2), entries); + convert_to_wide(pdc_result); + memcpy(r_addr, pdc_result, sizeof(*r_addr)); + memcpy(tbl, pdc_result2, entries * sizeof(*tbl)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* __LP64__ */ + +/* FIXME: Is this pdc used? I could not find type reference to ftc_bitmap + * so I guessed at unsigned long. Someone who knows what this does, can fix + * it later. :) + */ +int pdc_do_firm_test_reset(unsigned long ftc_bitmap) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_FIRM_TEST_RESET, + PDC_FIRM_TEST_MAGIC, ftc_bitmap); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_do_reset - Reset the system. + * + * Reset the system. + */ +int pdc_do_reset(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_RESET); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_soft_power_info - Enable soft power switch. + * @power_reg: address of soft power register + * + * Return the absolute address of the soft power switch register + */ +int __init pdc_soft_power_info(unsigned long *power_reg) +{ + int retval; + + *power_reg = (unsigned long) (-1); + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_INFO, __pa(pdc_result), 0); + if (retval == PDC_OK) { + convert_to_wide(pdc_result); + *power_reg = f_extend(pdc_result[0]); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_soft_power_button - Control the soft power button behaviour + * @sw_control: 0 for hardware control, 1 for software control + * + * + * This PDC function places the soft power button under software or + * hardware control. + * Under software control the OS may control to when to allow to shut + * down the system. Under hardware control pressing the power button + * powers off the system immediately. + */ +int pdc_soft_power_button(int sw_control) +{ + int retval; + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_ENABLE, __pa(pdc_result), sw_control); + spin_unlock_irq(&pdc_lock); + return retval; +} + +/* + * pdc_io_reset - Hack to avoid overlapping range registers of Bridges devices. + * Primarily a problem on T600 (which parisc-linux doesn't support) but + * who knows what other platform firmware might do with this OS "hook". + */ +void pdc_io_reset(void) +{ + spin_lock_irq(&pdc_lock); + mem_pdc_call(PDC_IO, PDC_IO_RESET, 0); + spin_unlock_irq(&pdc_lock); +} + +/* + * pdc_io_reset_devices - Hack to Stop USB controller + * + * If PDC used the usb controller, the usb controller + * is still running and will crash the machines during iommu + * setup, because of still running DMA. This PDC call + * stops the USB controller. + * Normally called after calling pdc_io_reset(). + */ +void pdc_io_reset_devices(void) +{ + spin_lock_irq(&pdc_lock); + mem_pdc_call(PDC_IO, PDC_IO_RESET_DEVICES, 0); + spin_unlock_irq(&pdc_lock); +} + + +/** + * pdc_iodc_putc - Console character print using IODC. + * @c: the character to output. + * + * Note that only these special chars are architected for console IODC io: + * BEL, BS, CR, and LF. Others are passed through. + * Since the HP console requires CR+LF to perform a 'newline', we translate + * "\n" to "\r\n". + */ +void pdc_iodc_putc(unsigned char c) +{ + /* XXX Should we spinlock posx usage */ + static int posx; /* for simple TAB-Simulation... */ + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + unsigned int n; + unsigned int flags; + + switch (c) { + case '\n': + iodc_dbuf[0] = '\r'; + iodc_dbuf[1] = '\n'; + n = 2; + posx = 0; + break; + case '\t': + pdc_iodc_putc(' '); + while (posx & 7) /* expand TAB */ + pdc_iodc_putc(' '); + return; /* return since IODC can't handle this */ + case '\b': + posx-=2; /* BS */ + default: + iodc_dbuf[0] = c; + n = 1; + posx++; + break; + } + + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_cons.iodc_io, + (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT, + PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0); + spin_unlock_irqrestore(&pdc_lock, flags); +} + +/** + * pdc_iodc_outc - Console character print using IODC (without conversions). + * @c: the character to output. + * + * Write the character directly to the IODC console. + */ +void pdc_iodc_outc(unsigned char c) +{ + unsigned int n, flags; + + /* fill buffer with one caracter and print it */ + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + + n = 1; + iodc_dbuf[0] = c; + + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_cons.iodc_io, + (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT, + PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0); + spin_unlock_irqrestore(&pdc_lock, flags); +} + +/** + * pdc_iodc_getc - Read a character (non-blocking) from the PDC console. + * + * Read a character (non-blocking) from the PDC console, returns -1 if + * key is not present. + */ +int pdc_iodc_getc(void) +{ + unsigned int flags; + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + int ch; + int status; + + /* Bail if no console input device. */ + if (!PAGE0->mem_kbd.iodc_io) + return 0; + + /* wait for a keyboard (rs232)-input */ + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_kbd.iodc_io, + (unsigned long)PAGE0->mem_kbd.hpa, ENTRY_IO_CIN, + PAGE0->mem_kbd.spa, __pa(PAGE0->mem_kbd.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), 1, 0); + + ch = *iodc_dbuf; + status = *iodc_retbuf; + spin_unlock_irqrestore(&pdc_lock, flags); + + if (status == 0) + return -1; + + return ch; +} + +int pdc_sti_call(unsigned long func, unsigned long flags, + unsigned long inptr, unsigned long outputr, + unsigned long glob_cfg) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = real32_call(func, flags, inptr, outputr, glob_cfg); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_sti_call); + +#ifdef __LP64__ +/** + * pdc_pat_cell_get_number - Returns the cell number. + * @cell_info: The return buffer. + * + * This PDC call returns the cell number of the cell from which the call + * is made. + */ +int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_GET_NUMBER, __pa(pdc_result)); + memcpy(cell_info, pdc_result, sizeof(*cell_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_cell_module - Retrieve the cell's module information. + * @actcnt: The number of bytes written to mem_addr. + * @ploc: The physical location. + * @mod: The module index. + * @view_type: The view of the address type. + * @mem_addr: The return buffer. + * + * This PDC call returns information about each module attached to the cell + * at the specified location. + */ +int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, + unsigned long view_type, void *mem_addr) +{ + int retval; + static struct pdc_pat_cell_mod_maddr_block result __attribute__ ((aligned (8))); + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_MODULE, __pa(pdc_result), + ploc, mod, view_type, __pa(&result)); + if(!retval) { + *actcnt = pdc_result[0]; + memcpy(mem_addr, &result, *actcnt); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_cpu_get_number - Retrieve the cpu number. + * @cpu_info: The return buffer. + * @hpa: The Hard Physical Address of the CPU. + * + * Retrieve the cpu number for the cpu at the specified HPA. + */ +int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CPU, PDC_PAT_CPU_GET_NUMBER, + __pa(&pdc_result), hpa); + memcpy(cpu_info, pdc_result, sizeof(*cpu_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_get_irt_size - Retrieve the number of entries in the cell's interrupt table. + * @num_entries: The return value. + * @cell_num: The target cell. + * + * This PDC function returns the number of entries in the specified cell's + * interrupt table. + */ +int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE, + __pa(pdc_result), cell_num); + *num_entries = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_get_irt - Retrieve the cell's interrupt table. + * @r_addr: The return buffer. + * @cell_num: The target cell. + * + * This PDC function returns the actual interrupt table for the specified cell. + */ +int pdc_pat_get_irt(void *r_addr, unsigned long cell_num) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE, + __pa(r_addr), cell_num); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_pd_get_addr_map - Retrieve information about memory address ranges. + * @actlen: The return buffer. + * @mem_addr: Pointer to the memory buffer. + * @count: The number of bytes to read from the buffer. + * @offset: The offset with respect to the beginning of the buffer. + * + */ +int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, + unsigned long count, unsigned long offset) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_PD, PDC_PAT_PD_GET_ADDR_MAP, __pa(pdc_result), + __pa(pdc_result2), count, offset); + *actual_len = pdc_result[0]; + memcpy(mem_addr, pdc_result2, *actual_len); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_io_pci_cfg_read - Read PCI configuration space. + * @pci_addr: PCI configuration space address for which the read request is being made. + * @pci_size: Size of read in bytes. Valid values are 1, 2, and 4. + * @mem_addr: Pointer to return memory buffer. + * + */ +int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *mem_addr) +{ + int retval; + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_READ, + __pa(pdc_result), pci_addr, pci_size); + switch(pci_size) { + case 1: *(u8 *) mem_addr = (u8) pdc_result[0]; + case 2: *(u16 *)mem_addr = (u16) pdc_result[0]; + case 4: *(u32 *)mem_addr = (u32) pdc_result[0]; + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_io_pci_cfg_write - Retrieve information about memory address ranges. + * @pci_addr: PCI configuration space address for which the write request is being made. + * @pci_size: Size of write in bytes. Valid values are 1, 2, and 4. + * @value: Pointer to 1, 2, or 4 byte value in low order end of argument to be + * written to PCI Config space. + * + */ +int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_WRITE, + pci_addr, pci_size, val); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* __LP64__ */ + + +/***************** 32-bit real-mode calls ***********/ +/* The struct below is used + * to overlay real_stack (real2.S), preparing a 32-bit call frame. + * real32_call_asm() then uses this stack in narrow real mode + */ + +struct narrow_stack { + /* use int, not long which is 64 bits */ + unsigned int arg13; + unsigned int arg12; + unsigned int arg11; + unsigned int arg10; + unsigned int arg9; + unsigned int arg8; + unsigned int arg7; + unsigned int arg6; + unsigned int arg5; + unsigned int arg4; + unsigned int arg3; + unsigned int arg2; + unsigned int arg1; + unsigned int arg0; + unsigned int frame_marker[8]; + unsigned int sp; + /* in reality, there's nearly 8k of stack after this */ +}; + +long real32_call(unsigned long fn, ...) +{ + va_list args; + extern struct narrow_stack real_stack; + extern unsigned long real32_call_asm(unsigned int *, + unsigned int *, + unsigned int); + + va_start(args, fn); + real_stack.arg0 = va_arg(args, unsigned int); + real_stack.arg1 = va_arg(args, unsigned int); + real_stack.arg2 = va_arg(args, unsigned int); + real_stack.arg3 = va_arg(args, unsigned int); + real_stack.arg4 = va_arg(args, unsigned int); + real_stack.arg5 = va_arg(args, unsigned int); + real_stack.arg6 = va_arg(args, unsigned int); + real_stack.arg7 = va_arg(args, unsigned int); + real_stack.arg8 = va_arg(args, unsigned int); + real_stack.arg9 = va_arg(args, unsigned int); + real_stack.arg10 = va_arg(args, unsigned int); + real_stack.arg11 = va_arg(args, unsigned int); + real_stack.arg12 = va_arg(args, unsigned int); + real_stack.arg13 = va_arg(args, unsigned int); + va_end(args); + + return real32_call_asm(&real_stack.sp, &real_stack.arg0, fn); +} + +#ifdef __LP64__ +/***************** 64-bit real-mode calls ***********/ + +struct wide_stack { + unsigned long arg0; + unsigned long arg1; + unsigned long arg2; + unsigned long arg3; + unsigned long arg4; + unsigned long arg5; + unsigned long arg6; + unsigned long arg7; + unsigned long arg8; + unsigned long arg9; + unsigned long arg10; + unsigned long arg11; + unsigned long arg12; + unsigned long arg13; + unsigned long frame_marker[2]; /* rp, previous sp */ + unsigned long sp; + /* in reality, there's nearly 8k of stack after this */ +}; + +long real64_call(unsigned long fn, ...) +{ + va_list args; + extern struct wide_stack real64_stack; + extern unsigned long real64_call_asm(unsigned long *, + unsigned long *, + unsigned long); + + va_start(args, fn); + real64_stack.arg0 = va_arg(args, unsigned long); + real64_stack.arg1 = va_arg(args, unsigned long); + real64_stack.arg2 = va_arg(args, unsigned long); + real64_stack.arg3 = va_arg(args, unsigned long); + real64_stack.arg4 = va_arg(args, unsigned long); + real64_stack.arg5 = va_arg(args, unsigned long); + real64_stack.arg6 = va_arg(args, unsigned long); + real64_stack.arg7 = va_arg(args, unsigned long); + real64_stack.arg8 = va_arg(args, unsigned long); + real64_stack.arg9 = va_arg(args, unsigned long); + real64_stack.arg10 = va_arg(args, unsigned long); + real64_stack.arg11 = va_arg(args, unsigned long); + real64_stack.arg12 = va_arg(args, unsigned long); + real64_stack.arg13 = va_arg(args, unsigned long); + va_end(args); + + return real64_call_asm(&real64_stack.sp, &real64_stack.arg0, fn); +} + +#endif /* __LP64__ */ + diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c new file mode 100644 index 000000000000..2071b5bba15c --- /dev/null +++ b/arch/parisc/kernel/hardware.c @@ -0,0 +1,1366 @@ +/* + * Hardware descriptions for HP 9000 based hardware, including + * system types, SCSI controllers, DMA controllers, HPPB controllers + * and lots more. + * + * Based on the document "PA-RISC 1.1 I/O Firmware Architecture + * Reference Specification", March 7, 1999, version 0.96. This + * is available at http://parisc-linux.org/documentation/ + * + * Copyright 1999 by Alex deVries + * and copyright 1999 The Puffin Group Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#include +#include +#include +#include + +/* + * HP PARISC Hardware Database + * Access to this database is only possible during bootup + * so don't reference this table after starting the init process + */ + +static struct hp_hardware hp_hardware_list[] __initdata = { + {HPHW_NPROC,0x01,0x4,0x0,"Indigo (840, 930)"}, + {HPHW_NPROC,0x8,0x4,0x01,"Firefox(825,925)"}, + {HPHW_NPROC,0xA,0x4,0x01,"Top Gun (835,834,935,635)"}, + {HPHW_NPROC,0xB,0x4,0x01,"Technical Shogun (845, 645)"}, + {HPHW_NPROC,0xF,0x4,0x01,"Commercial Shogun (949)"}, + {HPHW_NPROC,0xC,0x4,0x01,"Cheetah (850, 950)"}, + {HPHW_NPROC,0x80,0x4,0x01,"Cheetah (950S)"}, + {HPHW_NPROC,0x81,0x4,0x01,"Jaguar (855, 955)"}, + {HPHW_NPROC,0x82,0x4,0x01,"Cougar (860, 960)"}, + {HPHW_NPROC,0x83,0x4,0x13,"Panther (865, 870, 980)"}, + {HPHW_NPROC,0x100,0x4,0x01,"Burgundy (810)"}, + {HPHW_NPROC,0x101,0x4,0x01,"SilverFox Low (822, 922)"}, + {HPHW_NPROC,0x102,0x4,0x01,"SilverFox High (832, 932)"}, + {HPHW_NPROC,0x103,0x4,0x01,"Lego, SilverLite (815, 808, 920)"}, + {HPHW_NPROC,0x104,0x4,0x03,"SilverBullet Low (842, 948)"}, + {HPHW_NPROC,0x105,0x4,0x03,"SilverBullet High (852, 958)"}, + {HPHW_NPROC,0x106,0x4,0x81,"Oboe"}, + {HPHW_NPROC,0x180,0x4,0x12,"Dragon"}, + {HPHW_NPROC,0x181,0x4,0x13,"Chimera (890, 990, 992)"}, + {HPHW_NPROC,0x182,0x4,0x91,"TNT 100 (891,T500)"}, + {HPHW_NPROC,0x183,0x4,0x91,"TNT 120 (892,T520)"}, + {HPHW_NPROC,0x184,0x4,0x91,"Jade 180 U (893,T540)"}, + {HPHW_NPROC,0x1FF,0x4,0x91,"Hitachi X Processor"}, + {HPHW_NPROC,0x200,0x4,0x81,"Cobra (720)"}, + {HPHW_NPROC,0x201,0x4,0x81,"Coral (750)"}, + {HPHW_NPROC,0x202,0x4,0x81,"King Cobra (730)"}, + {HPHW_NPROC,0x203,0x4,0x81,"Hardball (735/99)"}, + {HPHW_NPROC,0x204,0x4,0x81,"Coral II (755/99)"}, + {HPHW_NPROC,0x205,0x4,0x81,"Coral II (755/125)"}, + {HPHW_NPROC,0x205,0x4,0x91,"Snake Eagle "}, + {HPHW_NPROC,0x206,0x4,0x81,"Snake Cheetah (735/130)"}, + {HPHW_NPROC,0x280,0x4,0x81,"Nova Low (817, 827, 957, 957LX)"}, + {HPHW_NPROC,0x281,0x4,0x81,"Nova High (837, 847, 857, 967, 967LX)"}, + {HPHW_NPROC,0x282,0x4,0x81,"Nova8 (807, 917, 917LX, 927,927LX, 937, 937LX, 947,947LX)"}, + {HPHW_NPROC,0x283,0x4,0x81,"Nova64 (867, 877, 977)"}, + {HPHW_NPROC,0x284,0x4,0x81,"TNova (887, 897, 987)"}, + {HPHW_NPROC,0x285,0x4,0x81,"TNova64"}, + {HPHW_NPROC,0x286,0x4,0x91,"Hydra64 (Nova)"}, + {HPHW_NPROC,0x287,0x4,0x91,"Hydra96 (Nova)"}, + {HPHW_NPROC,0x288,0x4,0x81,"TNova96"}, + {HPHW_NPROC,0x300,0x4,0x81,"Bushmaster (710)"}, + {HPHW_NPROC,0x302,0x4,0x81,"Flounder (705)"}, + {HPHW_NPROC,0x310,0x4,0x81,"Scorpio (715/50)"}, + {HPHW_NPROC,0x311,0x4,0x81,"Scorpio Jr.(715/33)"}, + {HPHW_NPROC,0x312,0x4,0x81,"Strider-50 (715S/50)"}, + {HPHW_NPROC,0x313,0x4,0x81,"Strider-33 (715S/33)"}, + {HPHW_NPROC,0x314,0x4,0x81,"Trailways-50 (715T/50)"}, + {HPHW_NPROC,0x315,0x4,0x81,"Trailways-33 (715T/33)"}, + {HPHW_NPROC,0x316,0x4,0x81,"Scorpio Sr.(715/75)"}, + {HPHW_NPROC,0x317,0x4,0x81,"Scorpio 100 (715/100)"}, + {HPHW_NPROC,0x318,0x4,0x81,"Spectra (725/50)"}, + {HPHW_NPROC,0x319,0x4,0x81,"Spectra (725/75)"}, + {HPHW_NPROC,0x320,0x4,0x81,"Spectra (725/100)"}, + {HPHW_NPROC,0x401,0x4,0x81,"Pace (745i, 747i)"}, + {HPHW_NPROC,0x402,0x4,0x81,"Sidewinder (742i)"}, + {HPHW_NPROC,0x403,0x4,0x81,"Fast Pace"}, + {HPHW_NPROC,0x480,0x4,0x81,"Orville (E23)"}, + {HPHW_NPROC,0x481,0x4,0x81,"Wilbur (E25)"}, + {HPHW_NPROC,0x482,0x4,0x81,"WB-80 (E35)"}, + {HPHW_NPROC,0x483,0x4,0x81,"WB-96 (E45)"}, + {HPHW_NPROC,0x484,0x4,0x81,"UL Proc L-100 (811/D210,D310)"}, + {HPHW_NPROC,0x485,0x4,0x81,"UL Proc L-75 (801/D200)"}, + {HPHW_NPROC,0x501,0x4,0x81,"Merlin L2 132 (9000/778/B132L)"}, + {HPHW_NPROC,0x502,0x4,0x81,"Merlin L2 160 (9000/778/B160L)"}, + {HPHW_NPROC,0x503,0x4,0x81,"Merlin L2+ 132 (9000/778/B132L)"}, + {HPHW_NPROC,0x504,0x4,0x81,"Merlin L2+ 180 (9000/778/B180L)"}, + {HPHW_NPROC,0x505,0x4,0x81,"Raven L2 132 (9000/778/C132L)"}, + {HPHW_NPROC,0x506,0x4,0x81,"Raven L2 160 (9000/779/C160L)"}, + {HPHW_NPROC,0x507,0x4,0x81,"Raven L2 180 (9000/779/C180L)"}, + {HPHW_NPROC,0x508,0x4,0x81,"Raven L2 160 (9000/779/C160L)"}, + {HPHW_NPROC,0x509,0x4,0x81,"712/132 L2 Upgrade"}, + {HPHW_NPROC,0x50A,0x4,0x81,"712/160 L2 Upgrade"}, + {HPHW_NPROC,0x50B,0x4,0x81,"715/132 L2 Upgrade"}, + {HPHW_NPROC,0x50C,0x4,0x81,"715/160 L2 Upgrade"}, + {HPHW_NPROC,0x50D,0x4,0x81,"Rocky2 L2 120"}, + {HPHW_NPROC,0x50E,0x4,0x81,"Rocky2 L2 150"}, + {HPHW_NPROC,0x50F,0x4,0x81,"Anole L2 132 (744)"}, + {HPHW_NPROC,0x510,0x4,0x81,"Anole L2 165 (744)"}, + {HPHW_NPROC,0x511,0x4,0x81,"Kiji L2 132"}, + {HPHW_NPROC,0x512,0x4,0x81,"UL L2 132 (803/D220,D320)"}, + {HPHW_NPROC,0x513,0x4,0x81,"UL L2 160 (813/D220,D320)"}, + {HPHW_NPROC,0x514,0x4,0x81,"Merlin Jr L2 132"}, + {HPHW_NPROC,0x515,0x4,0x81,"Staccato L2 132"}, + {HPHW_NPROC,0x516,0x4,0x81,"Staccato L2 180 (A Class 180)"}, + {HPHW_NPROC,0x580,0x4,0x81,"KittyHawk DC2-100 (K100)"}, + {HPHW_NPROC,0x581,0x4,0x91,"KittyHawk DC3-120 (K210)"}, + {HPHW_NPROC,0x582,0x4,0x91,"KittyHawk DC3 100 (K400)"}, + {HPHW_NPROC,0x583,0x4,0x91,"KittyHawk DC3 120 (K410)"}, + {HPHW_NPROC,0x584,0x4,0x91,"LighteningHawk T120"}, + {HPHW_NPROC,0x585,0x4,0x91,"SkyHawk 100"}, + {HPHW_NPROC,0x586,0x4,0x91,"SkyHawk 120"}, + {HPHW_NPROC,0x587,0x4,0x81,"UL Proc 1-way T'120"}, + {HPHW_NPROC,0x588,0x4,0x91,"UL Proc 2-way T'120"}, + {HPHW_NPROC,0x589,0x4,0x81,"UL Proc 1-way T'100 (821/D250,D350)"}, + {HPHW_NPROC,0x58A,0x4,0x91,"UL Proc 2-way T'100 (831/D250,D350)"}, + {HPHW_NPROC,0x58B,0x4,0x91,"KittyHawk DC2 100 (K200)"}, + {HPHW_NPROC,0x58C,0x4,0x91,"ThunderHawk DC3- 120 1M (K220)"}, + {HPHW_NPROC,0x58D,0x4,0x91,"ThunderHawk DC3 120 1M (K420)"}, + {HPHW_NPROC,0x58E,0x4,0x81,"Raven 120 T'"}, + {HPHW_NPROC,0x58F,0x4,0x91,"Mohawk 160 U 1M DC3 (K450)"}, + {HPHW_NPROC,0x590,0x4,0x91,"Mohawk 180 U 1M DC3 (K460)"}, + {HPHW_NPROC,0x591,0x4,0x91,"Mohawk 200 U 1M DC3"}, + {HPHW_NPROC,0x592,0x4,0x81,"Raven 100 T'"}, + {HPHW_NPROC,0x593,0x4,0x91,"FireHawk 160 U"}, + {HPHW_NPROC,0x594,0x4,0x91,"FireHawk 180 U"}, + {HPHW_NPROC,0x595,0x4,0x91,"FireHawk 220 U"}, + {HPHW_NPROC,0x596,0x4,0x91,"FireHawk 240 U"}, + {HPHW_NPROC,0x597,0x4,0x91,"SPP2000 processor"}, + {HPHW_NPROC,0x598,0x4,0x81,"Raven U 230 (9000/780/C230)"}, + {HPHW_NPROC,0x599,0x4,0x81,"Raven U 240 (9000/780/C240)"}, + {HPHW_NPROC,0x59A,0x4,0x91,"Unlisted but reserved"}, + {HPHW_NPROC,0x59A,0x4,0x81,"Unlisted but reserved"}, + {HPHW_NPROC,0x59B,0x4,0x81,"Raven U 160 (9000/780/C160)"}, + {HPHW_NPROC,0x59C,0x4,0x81,"Raven U 180 (9000/780/C180)"}, + {HPHW_NPROC,0x59D,0x4,0x81,"Raven U 200 (9000/780/C200)"}, + {HPHW_NPROC,0x59E,0x4,0x91,"ThunderHawk T' 120"}, + {HPHW_NPROC,0x59F,0x4,0x91,"Raven U 180+ (9000/780)"}, + {HPHW_NPROC,0x5A0,0x4,0x81,"UL 1w T120 1MB/1MB (841/D260,D360)"}, + {HPHW_NPROC,0x5A1,0x4,0x91,"UL 2w T120 1MB/1MB (851/D260,D360)"}, + {HPHW_NPROC,0x5A2,0x4,0x81,"UL 1w U160 512K/512K (861/D270,D370)"}, + {HPHW_NPROC,0x5A3,0x4,0x91,"UL 2w U160 512K/512K (871/D270,D370)"}, + {HPHW_NPROC,0x5A4,0x4,0x91,"Mohawk 160 U 1M DC3- (K250)"}, + {HPHW_NPROC,0x5A5,0x4,0x91,"Mohawk 180 U 1M DC3- (K260)"}, + {HPHW_NPROC,0x5A6,0x4,0x91,"Mohawk 200 U 1M DC3-"}, + {HPHW_NPROC,0x5A7,0x4,0x81,"UL proc 1-way U160 1M/1M"}, + {HPHW_NPROC,0x5A8,0x4,0x91,"UL proc 2-way U160 1M/1M"}, + {HPHW_NPROC,0x5A9,0x4,0x81,"UL proc 1-way U180 1M/1M"}, + {HPHW_NPROC,0x5AA,0x4,0x91,"UL proc 2-way U180 1M/1M"}, + {HPHW_NPROC,0x5AB,0x4,0x91,"Obsolete"}, + {HPHW_NPROC,0x5AB,0x4,0x81,"Obsolete"}, + {HPHW_NPROC,0x5AC,0x4,0x91,"Obsolete"}, + {HPHW_NPROC,0x5AC,0x4,0x81,"Obsolete"}, + {HPHW_NPROC,0x5AD,0x4,0x91,"BraveHawk 180MHz DC3-"}, + {HPHW_NPROC,0x5AE,0x4,0x91,"BraveHawk 200MHz DC3- (898/K370)"}, + {HPHW_NPROC,0x5AF,0x4,0x91,"BraveHawk 220MHz DC3-"}, + {HPHW_NPROC,0x5B0,0x4,0x91,"BraveHawk 180MHz DC3"}, + {HPHW_NPROC,0x5B1,0x4,0x91,"BraveHawk 200MHz DC3 (899/K570)"}, + {HPHW_NPROC,0x5B2,0x4,0x91,"BraveHawk 220MHz DC3"}, + {HPHW_NPROC,0x5B3,0x4,0x91,"FireHawk 200"}, + {HPHW_NPROC,0x5B4,0x4,0x91,"SPP2500"}, + {HPHW_NPROC,0x5B5,0x4,0x91,"SummitHawk U+"}, + {HPHW_NPROC,0x5B6,0x4,0x91,"DragonHawk U+ 240 DC3"}, + {HPHW_NPROC,0x5B7,0x4,0x91,"DragonHawk U+ 240 DC3-"}, + {HPHW_NPROC,0x5B8,0x4,0x91,"SPP2250 240 MHz"}, + {HPHW_NPROC,0x5B9,0x4,0x81,"UL 1w U+/240 (350/550)"}, + {HPHW_NPROC,0x5BA,0x4,0x91,"UL 2w U+/240 (350/550)"}, + {HPHW_NPROC,0x5BB,0x4,0x81,"AllegroHigh W"}, + {HPHW_NPROC,0x5BC,0x4,0x91,"AllegroLow W"}, + {HPHW_NPROC,0x5BD,0x4,0x91,"Forte W 2-way"}, + {HPHW_NPROC,0x5BE,0x4,0x91,"Prelude W"}, + {HPHW_NPROC,0x5BF,0x4,0x91,"Forte W 4-way"}, + {HPHW_NPROC,0x5C0,0x4,0x91,"M2250"}, + {HPHW_NPROC,0x5C1,0x4,0x91,"M2500"}, + {HPHW_NPROC,0x5C2,0x4,0x91,"Sonata 440"}, + {HPHW_NPROC,0x5C3,0x4,0x91,"Sonata 360"}, + {HPHW_NPROC,0x5C4,0x4,0x91,"Rhapsody 440"}, + {HPHW_NPROC,0x5C5,0x4,0x91,"Rhapsody 360"}, + {HPHW_NPROC,0x5C6,0x4,0x91,"Raven W 360 (9000/780)"}, + {HPHW_NPROC,0x5C7,0x4,0x91,"Halfdome W 440"}, + {HPHW_NPROC,0x5C8,0x4,0x81,"Lego 360 processor"}, + {HPHW_NPROC,0x5C9,0x4,0x91,"Rhapsody DC- 440"}, + {HPHW_NPROC,0x5CA,0x4,0x91,"Rhapsody DC- 360"}, + {HPHW_NPROC,0x5CB,0x4,0x91,"Crescendo 440"}, + {HPHW_NPROC,0x5CC,0x4,0x91,"Prelude W 440"}, + {HPHW_NPROC,0x5CD,0x4,0x91,"SPP2600"}, + {HPHW_NPROC,0x5CE,0x4,0x91,"M2600"}, + {HPHW_NPROC,0x5CF,0x4,0x81,"Allegro W+"}, + {HPHW_NPROC,0x5D0,0x4,0x81,"Kazoo W+"}, + {HPHW_NPROC,0x5D1,0x4,0x91,"Forte W+ 2w"}, + {HPHW_NPROC,0x5D2,0x4,0x91,"Forte W+ 4w"}, + {HPHW_NPROC,0x5D3,0x4,0x91,"Prelude W+ 540"}, + {HPHW_NPROC,0x5D4,0x4,0x91,"Duet W+"}, + {HPHW_NPROC,0x5D5,0x4,0x91,"Crescendo 550"}, + {HPHW_NPROC,0x5D6,0x4,0x81,"Crescendo DC- 440"}, + {HPHW_NPROC,0x5D7,0x4,0x91,"Keystone W+"}, + {HPHW_NPROC,0x5D8,0x4,0x91,"Rhapsody wave 2 W+ DC-"}, + {HPHW_NPROC,0x5D9,0x4,0x91,"Rhapsody wave 2 W+"}, + {HPHW_NPROC,0x5DA,0x4,0x91,"Marcato W+ DC-"}, + {HPHW_NPROC,0x5DB,0x4,0x91,"Marcato W+"}, + {HPHW_NPROC,0x5DC,0x4,0x91,"Allegro W2"}, + {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, + {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, + {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, + {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, + {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, + {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, + {HPHW_NPROC,0x5E3,0x4,0x91,"Crescendo 750 W2"}, + {HPHW_NPROC,0x5E4,0x4,0x91,"Keystone/Matterhorn W2 750"}, + {HPHW_NPROC,0x5E5,0x4,0x91,"PowerBar W+"}, + {HPHW_NPROC,0x5E6,0x4,0x91,"Keystone/Matterhorn W2 650"}, + {HPHW_NPROC,0x5E7,0x4,0x91,"Caribe W2 800"}, + {HPHW_NPROC,0x5E8,0x4,0x91,"Pikes Peak W2"}, + {HPHW_NPROC,0x5FF,0x4,0x91,"Hitachi W"}, + {HPHW_NPROC,0x600,0x4,0x81,"Gecko (712/60)"}, + {HPHW_NPROC,0x601,0x4,0x81,"Gecko 80 (712/80)"}, + {HPHW_NPROC,0x602,0x4,0x81,"Gecko 100 (712/100)"}, + {HPHW_NPROC,0x603,0x4,0x81,"Anole 64 (743/64)"}, + {HPHW_NPROC,0x604,0x4,0x81,"Anole 100 (743/100)"}, + {HPHW_NPROC,0x605,0x4,0x81,"Gecko 120 (712/120)"}, + {HPHW_NPROC,0x606,0x4,0x81,"Gila 80"}, + {HPHW_NPROC,0x607,0x4,0x81,"Gila 100"}, + {HPHW_NPROC,0x608,0x4,0x81,"Gila 120"}, + {HPHW_NPROC,0x609,0x4,0x81,"Scorpio-L 80"}, + {HPHW_NPROC,0x60A,0x4,0x81,"Mirage Jr (715/64)"}, + {HPHW_NPROC,0x60B,0x4,0x81,"Mirage 100"}, + {HPHW_NPROC,0x60C,0x4,0x81,"Mirage 100+"}, + {HPHW_NPROC,0x60D,0x4,0x81,"Electra 100"}, + {HPHW_NPROC,0x60E,0x4,0x81,"Electra 120"}, + {HPHW_NPROC,0x610,0x4,0x81,"Scorpio-L 100"}, + {HPHW_NPROC,0x611,0x4,0x81,"Scorpio-L 120"}, + {HPHW_NPROC,0x612,0x4,0x81,"Spectra-L 80"}, + {HPHW_NPROC,0x613,0x4,0x81,"Spectra-L 100"}, + {HPHW_NPROC,0x614,0x4,0x81,"Spectra-L 120"}, + {HPHW_NPROC,0x615,0x4,0x81,"Piranha 100"}, + {HPHW_NPROC,0x616,0x4,0x81,"Piranha 120"}, + {HPHW_NPROC,0x617,0x4,0x81,"Jason 50"}, + {HPHW_NPROC,0x618,0x4,0x81,"Jason 100"}, + {HPHW_NPROC,0x619,0x4,0x81,"Mirage 80"}, + {HPHW_NPROC,0x61A,0x4,0x81,"SAIC L-80"}, + {HPHW_NPROC,0x61B,0x4,0x81,"Rocky1 L-60"}, + {HPHW_NPROC,0x61C,0x4,0x81,"Anole T (743/T)"}, + {HPHW_NPROC,0x67E,0x4,0x81,"Hitachi Tiny 80"}, + {HPHW_NPROC,0x67F,0x4,0x81,"Hitachi Tiny 64"}, + {HPHW_NPROC,0x700,0x4,0x91,"NEC Aska Processor"}, + {HPHW_NPROC,0x880,0x4,0x91,"Orca Mako"}, + {HPHW_NPROC,0x881,0x4,0x91,"Everest Mako"}, + {HPHW_NPROC,0x882,0x4,0x91,"Rainier/Medel Mako Slow"}, + {HPHW_NPROC,0x883,0x4,0x91,"Rainier/Medel Mako Fast"}, + {HPHW_NPROC,0x884,0x4,0x91,"Mt. Hamilton"}, + {HPHW_NPROC,0x885,0x4,0x91,"Mt. Hamilton DC-"}, + {HPHW_NPROC,0x886,0x4,0x91,"Storm Peak Slow DC-"}, + {HPHW_NPROC,0x887,0x4,0x91,"Storm Peak Slow"}, + {HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"}, + {HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"}, + {HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak"}, + {HPHW_A_DIRECT, 0x004, 0x0000D, 0x00, "Arrakis MUX"}, + {HPHW_A_DIRECT, 0x005, 0x0000D, 0x00, "Dyun Kiuh MUX"}, + {HPHW_A_DIRECT, 0x006, 0x0000D, 0x00, "Baat Kiuh AP/MUX (40299B)"}, + {HPHW_A_DIRECT, 0x007, 0x0000D, 0x00, "Dino AP"}, + {HPHW_A_DIRECT, 0x009, 0x0000D, 0x00, "Solaris Direct Connect MUX (J2092A)"}, + {HPHW_A_DIRECT, 0x00A, 0x0000D, 0x00, "Solaris RS-422/423 MUX (J2093A)"}, + {HPHW_A_DIRECT, 0x00B, 0x0000D, 0x00, "Solaris RS-422/423 Quadriloops MUX"}, + {HPHW_A_DIRECT, 0x00C, 0x0000D, 0x00, "Solaris Modem MUX (J2094A)"}, + {HPHW_A_DIRECT, 0x00D, 0x0000D, 0x00, "Twins Direct Connect MUX"}, + {HPHW_A_DIRECT, 0x00E, 0x0000D, 0x00, "Twins Modem MUX"}, + {HPHW_A_DIRECT, 0x00F, 0x0000D, 0x00, "Nautilus RS-485"}, + {HPHW_A_DIRECT, 0x010, 0x0000D, 0x00, "UltraLight CAP/MUX"}, + {HPHW_A_DIRECT, 0x015, 0x0000D, 0x00, "Eole CAP/MUX"}, + {HPHW_A_DIRECT, 0x024, 0x0000D, 0x00, "Sahp Kiuh AP/MUX"}, + {HPHW_A_DIRECT, 0x034, 0x0000D, 0x00, "Sahp Kiuh Low AP/MUX"}, + {HPHW_A_DIRECT, 0x044, 0x0000D, 0x00, "Sahp Baat Kiuh AP/MUX"}, + {HPHW_A_DIRECT, 0x004, 0x0000E, 0x80, "Burgundy RS-232"}, + {HPHW_A_DIRECT, 0x005, 0x0000E, 0x80, "Silverfox RS-232"}, + {HPHW_A_DIRECT, 0x006, 0x0000E, 0x80, "Lego RS-232"}, + {HPHW_A_DIRECT, 0x004, 0x0000F, 0x00, "Peacock Graphics"}, + {HPHW_A_DIRECT, 0x004, 0x00014, 0x80, "Burgundy HIL"}, + {HPHW_A_DIRECT, 0x005, 0x00014, 0x80, "Peacock HIL"}, + {HPHW_A_DIRECT, 0x004, 0x00015, 0x80, "Leonardo"}, + {HPHW_A_DIRECT, 0x004, 0x00016, 0x80, "HP-PB HRM"}, + {HPHW_A_DIRECT, 0x004, 0x00017, 0x80, "HP-PB HRC"}, + {HPHW_A_DIRECT, 0x004, 0x0003A, 0x80, "Skunk Centronics (28655A)"}, + {HPHW_A_DIRECT, 0x024, 0x0003A, 0x80, "Sahp Kiuh Centronics"}, + {HPHW_A_DIRECT, 0x044, 0x0003A, 0x80, "Sahp Baat Kiuh Centronics"}, + {HPHW_A_DIRECT, 0x004, 0x0004E, 0x80, "AT&T DataKit (AMSO)"}, + {HPHW_A_DIRECT, 0x004, 0x0009B, 0x80, "Test&Meas GSC HPIB"}, + {HPHW_A_DIRECT, 0x004, 0x000A8, 0x00, "Rocky2-120 Front Keyboard"}, + {HPHW_A_DIRECT, 0x005, 0x000A8, 0x00, "Rocky2-150 Front Keyboard"}, + {HPHW_A_DIRECT, 0x004, 0x00101, 0x80, "Hitachi Console Module"}, + {HPHW_A_DIRECT, 0x004, 0x00102, 0x80, "Hitachi Boot Module"}, + {HPHW_A_DIRECT, 0x004, 0x00203, 0x80, "MELCO HBMLA MLAIT"}, + {HPHW_A_DIRECT, 0x004, 0x00208, 0x80, "MELCO HBDPC"}, + {HPHW_A_DIRECT, 0x004, 0x00300, 0x00, "DCI TWINAX TERM IO MUX"}, + {HPHW_A_DMA, 0x004, 0x00039, 0x80, "Skunk SCSI (28655A)"}, + {HPHW_A_DMA, 0x005, 0x00039, 0x80, "KittyHawk CSY Core SCSI"}, + {HPHW_A_DMA, 0x014, 0x00039, 0x80, "Diablo SCSI"}, + {HPHW_A_DMA, 0x024, 0x00039, 0x80, "Sahp Kiuh SCSI"}, + {HPHW_A_DMA, 0x034, 0x00039, 0x80, "Sahp Kiuh Low SCSI"}, + {HPHW_A_DMA, 0x044, 0x00039, 0x80, "Sahp Baat Kiuh SCSI"}, + {HPHW_A_DMA, 0x004, 0x0003B, 0x80, "Wizard SCSI"}, + {HPHW_A_DMA, 0x005, 0x0003B, 0x80, "KittyHawk CSY Core FW-SCSI"}, + {HPHW_A_DMA, 0x006, 0x0003B, 0x80, "Symbios EPIC FW-SCSI"}, + {HPHW_A_DMA, 0x004, 0x00040, 0x80, "HP-PB Shazam HPIB (28650A)"}, + {HPHW_A_DMA, 0x005, 0x00040, 0x80, "Burgundy HPIB"}, + {HPHW_A_DMA, 0x004, 0x00041, 0x80, "HP-PB HP-FL"}, + {HPHW_A_DMA, 0x004, 0x00042, 0x80, "HP-PB LoQuix HPIB (28650B)"}, + {HPHW_A_DMA, 0x004, 0x00043, 0x80, "HP-PB Crypt LoQuix"}, + {HPHW_A_DMA, 0x004, 0x00044, 0x80, "HP-PB Shazam GPIO (28651A)"}, + {HPHW_A_DMA, 0x004, 0x00045, 0x80, "HP-PB LoQuix GPIO"}, + {HPHW_A_DMA, 0x004, 0x00046, 0x80, "2-Port X.25 NIO_ACC (AMSO)"}, + {HPHW_A_DMA, 0x004, 0x00047, 0x80, "4-Port X.25 NIO_ACC (AMSO)"}, + {HPHW_A_DMA, 0x004, 0x0004B, 0x80, "LGB Control"}, + {HPHW_A_DMA, 0x004, 0x0004C, 0x80, "Martian RTI (AMSO)"}, + {HPHW_A_DMA, 0x004, 0x0004D, 0x80, "ACC Mux (AMSO)"}, + {HPHW_A_DMA, 0x004, 0x00050, 0x80, "Lanbrusca 802.3 (36967A)"}, + {HPHW_A_DMA, 0x004, 0x00056, 0x80, "HP-PB LoQuix FDDI"}, + {HPHW_A_DMA, 0x004, 0x00057, 0x80, "HP-PB LoQuix FDDI (28670A)"}, + {HPHW_A_DMA, 0x004, 0x0005E, 0x00, "Gecko Add-on Token Ring"}, + {HPHW_A_DMA, 0x012, 0x00089, 0x80, "Barracuda Add-on FW-SCSI"}, + {HPHW_A_DMA, 0x013, 0x00089, 0x80, "Bluefish Add-on FW-SCSI"}, + {HPHW_A_DMA, 0x014, 0x00089, 0x80, "Shrike Add-on FW-SCSI"}, + {HPHW_A_DMA, 0x015, 0x00089, 0x80, "KittyHawk GSY Core FW-SCSI"}, + {HPHW_A_DMA, 0x017, 0x00089, 0x80, "Shrike Jade Add-on FW-SCSI (A3644A)"}, + {HPHW_A_DMA, 0x01F, 0x00089, 0x80, "SkyHawk 100/120 FW-SCSI"}, + {HPHW_A_DMA, 0x027, 0x00089, 0x80, "Piranha 100 FW-SCSI"}, + {HPHW_A_DMA, 0x032, 0x00089, 0x80, "Raven T' Core FW-SCSI"}, + {HPHW_A_DMA, 0x03B, 0x00089, 0x80, "Raven U/L2 Core FW-SCSI"}, + {HPHW_A_DMA, 0x03C, 0x00089, 0x80, "Merlin 132 Core FW-SCSI"}, + {HPHW_A_DMA, 0x03D, 0x00089, 0x80, "Merlin 160 Core FW-SCSI"}, + {HPHW_A_DMA, 0x044, 0x00089, 0x80, "Mohawk Core FW-SCSI"}, + {HPHW_A_DMA, 0x051, 0x00089, 0x80, "Firehawk FW-SCSI"}, + {HPHW_A_DMA, 0x058, 0x00089, 0x80, "FireHawk 200 FW-SCSI"}, + {HPHW_A_DMA, 0x05C, 0x00089, 0x80, "SummitHawk 230 Ultra-SCSI"}, + {HPHW_A_DMA, 0x014, 0x00091, 0x80, "Baby Hugo Add-on Net FC (A3406A)"}, + {HPHW_A_DMA, 0x020, 0x00091, 0x80, "Baby Jade Add-on Net FC (A3638A)"}, + {HPHW_A_DMA, 0x004, 0x00092, 0x80, "GSC+ YLIASTER ATM"}, + {HPHW_A_DMA, 0x004, 0x00095, 0x80, "Hamlyn GSC+ Network Card"}, + {HPHW_A_DMA, 0x004, 0x00098, 0x80, "Lo-fat Emulator"}, + {HPHW_A_DMA, 0x004, 0x0009A, 0x80, "GSC+ Venus ATM"}, + {HPHW_A_DMA, 0x005, 0x0009A, 0x80, "GSC+ Samorobrive ATM"}, + {HPHW_A_DMA, 0x004, 0x0009D, 0x80, "HP HSC-PCI Cards"}, + {HPHW_A_DMA, 0x004, 0x0009E, 0x80, "Alaxis GSC+ 155Mb ATM"}, + {HPHW_A_DMA, 0x005, 0x0009E, 0x80, "Alaxis GSC+ 622Mb ATM"}, + {HPHW_A_DMA, 0x05C, 0x0009F, 0x80, "SummitHawk 230 USB"}, + {HPHW_A_DMA, 0x05C, 0x000A0, 0x80, "SummitHawk 230 100BaseT"}, + {HPHW_A_DMA, 0x015, 0x000A7, 0x80, "Baby Hugo Add-on mass FC (A3404A)"}, + {HPHW_A_DMA, 0x018, 0x000A7, 0x80, "Mombasa GS Add-on mass FC (A3591)"}, + {HPHW_A_DMA, 0x021, 0x000A7, 0x80, "Baby Jade Add-on mass FC (A3636A)"}, + {HPHW_A_DMA, 0x004, 0x00201, 0x80, "MELCO HCMAP"}, + {HPHW_A_DMA, 0x004, 0x00202, 0x80, "MELCO HBMLA MLAMA"}, + {HPHW_A_DMA, 0x004, 0x00205, 0x80, "MELCO HBRFU"}, + {HPHW_A_DMA, 0x004, 0x00380, 0x80, "Interphase NIO-FC"}, + {HPHW_A_DMA, 0x004, 0x00381, 0x80, "Interphase NIO-ATM"}, + {HPHW_A_DMA, 0x004, 0x00382, 0x80, "Interphase NIO-100BaseTX"}, + {HPHW_BA, 0x004, 0x00070, 0x0, "Cobra Core BA"}, + {HPHW_BA, 0x005, 0x00070, 0x0, "Coral Core BA"}, + {HPHW_BA, 0x006, 0x00070, 0x0, "Bushmaster Core BA"}, + {HPHW_BA, 0x007, 0x00070, 0x0, "Scorpio Core BA"}, + {HPHW_BA, 0x008, 0x00070, 0x0, "Flounder Core BA"}, + {HPHW_BA, 0x009, 0x00070, 0x0, "Outfield Core BA"}, + {HPHW_BA, 0x00A, 0x00070, 0x0, "CoralII Core BA"}, + {HPHW_BA, 0x00B, 0x00070, 0x0, "Scorpio Jr. Core BA"}, + {HPHW_BA, 0x00C, 0x00070, 0x0, "Strider-50 Core BA"}, + {HPHW_BA, 0x00D, 0x00070, 0x0, "Strider-33 Core BA"}, + {HPHW_BA, 0x00E, 0x00070, 0x0, "Trailways-50 Core BA"}, + {HPHW_BA, 0x00F, 0x00070, 0x0, "Trailways-33 Core BA"}, + {HPHW_BA, 0x010, 0x00070, 0x0, "Pace Core BA"}, + {HPHW_BA, 0x011, 0x00070, 0x0, "Sidewinder Core BA"}, + {HPHW_BA, 0x019, 0x00070, 0x0, "Scorpio Sr. Core BA"}, + {HPHW_BA, 0x020, 0x00070, 0x0, "Scorpio 100 Core BA"}, + {HPHW_BA, 0x021, 0x00070, 0x0, "Spectra 50 Core BA"}, + {HPHW_BA, 0x022, 0x00070, 0x0, "Spectra 75 Core BA"}, + {HPHW_BA, 0x023, 0x00070, 0x0, "Spectra 100 Core BA"}, + {HPHW_BA, 0x024, 0x00070, 0x0, "Fast Pace Core BA"}, + {HPHW_BA, 0x026, 0x00070, 0x0, "CoralII Jaguar Core BA"}, + {HPHW_BA, 0x004, 0x00076, 0x0, "Cobra EISA BA"}, + {HPHW_BA, 0x005, 0x00076, 0x0, "Coral EISA BA"}, + {HPHW_BA, 0x007, 0x00076, 0x0, "Scorpio EISA BA"}, + {HPHW_BA, 0x00A, 0x00076, 0x0, "CoralII EISA BA"}, + {HPHW_BA, 0x00B, 0x00076, 0x0, "Scorpio Jr. EISA BA"}, + {HPHW_BA, 0x00C, 0x00076, 0x0, "Strider-50 Core EISA"}, + {HPHW_BA, 0x00D, 0x00076, 0x0, "Strider-33 Core EISA"}, + {HPHW_BA, 0x00E, 0x00076, 0x0, "Trailways-50 Core EISA"}, + {HPHW_BA, 0x00F, 0x00076, 0x0, "Trailways-33 Core EISA"}, + {HPHW_BA, 0x010, 0x00076, 0x0, "Pace Core EISA"}, + {HPHW_BA, 0x019, 0x00076, 0x0, "Scorpio Sr. EISA BA"}, + {HPHW_BA, 0x020, 0x00076, 0x0, "Scorpio 100 EISA BA"}, + {HPHW_BA, 0x021, 0x00076, 0x0, "Spectra 50 EISA BA"}, + {HPHW_BA, 0x022, 0x00076, 0x0, "Spectra 75 EISA BA"}, + {HPHW_BA, 0x023, 0x00076, 0x0, "Spectra 100 EISA BA"}, + {HPHW_BA, 0x026, 0x00076, 0x0, "CoralII Jaguar EISA BA"}, + {HPHW_BA, 0x010, 0x00078, 0x0, "Pace VME BA"}, + {HPHW_BA, 0x011, 0x00078, 0x0, "Sidewinder VME BA"}, + {HPHW_BA, 0x01A, 0x00078, 0x0, "Anole 64 VME BA"}, + {HPHW_BA, 0x01B, 0x00078, 0x0, "Anole 100 VME BA"}, + {HPHW_BA, 0x024, 0x00078, 0x0, "Fast Pace VME BA"}, + {HPHW_BA, 0x034, 0x00078, 0x0, "Anole T VME BA"}, + {HPHW_BA, 0x04A, 0x00078, 0x0, "Anole L2 132 VME BA"}, + {HPHW_BA, 0x04C, 0x00078, 0x0, "Anole L2 165 VME BA"}, + {HPHW_BA, 0x011, 0x00081, 0x0, "WB-96 Core BA"}, + {HPHW_BA, 0x012, 0x00081, 0x0, "Orville UX Core BA"}, + {HPHW_BA, 0x013, 0x00081, 0x0, "Wilbur UX Core BA"}, + {HPHW_BA, 0x014, 0x00081, 0x0, "WB-80 Core BA"}, + {HPHW_BA, 0x015, 0x00081, 0x0, "KittyHawk GSY Core BA"}, + {HPHW_BA, 0x016, 0x00081, 0x0, "Gecko Core BA"}, + {HPHW_BA, 0x018, 0x00081, 0x0, "Gecko Optional BA"}, + {HPHW_BA, 0x01A, 0x00081, 0x0, "Anole 64 Core BA"}, + {HPHW_BA, 0x01B, 0x00081, 0x0, "Anole 100 Core BA"}, + {HPHW_BA, 0x01C, 0x00081, 0x0, "Gecko 80 Core BA"}, + {HPHW_BA, 0x01D, 0x00081, 0x0, "Gecko 100 Core BA"}, + {HPHW_BA, 0x01F, 0x00081, 0x0, "SkyHawk 100/120 Core BA"}, + {HPHW_BA, 0x027, 0x00081, 0x0, "Piranha 100 Core BA"}, + {HPHW_BA, 0x028, 0x00081, 0x0, "Mirage Jr Core BA"}, + {HPHW_BA, 0x029, 0x00081, 0x0, "Mirage Core BA"}, + {HPHW_BA, 0x02A, 0x00081, 0x0, "Electra Core BA"}, + {HPHW_BA, 0x02B, 0x00081, 0x0, "Mirage 80 Core BA"}, + {HPHW_BA, 0x02C, 0x00081, 0x0, "Mirage 100+ Core BA"}, + {HPHW_BA, 0x02E, 0x00081, 0x0, "UL 350 Lasi Core BA"}, + {HPHW_BA, 0x02F, 0x00081, 0x0, "UL 550 Lasi Core BA"}, + {HPHW_BA, 0x032, 0x00081, 0x0, "Raven T' Core BA"}, + {HPHW_BA, 0x033, 0x00081, 0x0, "Anole T Core BA"}, + {HPHW_BA, 0x034, 0x00081, 0x0, "SAIC L-80 Core BA"}, + {HPHW_BA, 0x035, 0x00081, 0x0, "PCX-L2 712/132 Core BA"}, + {HPHW_BA, 0x036, 0x00081, 0x0, "PCX-L2 712/160 Core BA"}, + {HPHW_BA, 0x03B, 0x00081, 0x0, "Raven U/L2 Core BA"}, + {HPHW_BA, 0x03C, 0x00081, 0x0, "Merlin 132 Core BA"}, + {HPHW_BA, 0x03D, 0x00081, 0x0, "Merlin 160 Core BA"}, + {HPHW_BA, 0x03E, 0x00081, 0x0, "Merlin+ 132 Core BA"}, + {HPHW_BA, 0x03F, 0x00081, 0x0, "Merlin+ 180 Core BA"}, + {HPHW_BA, 0x044, 0x00081, 0x0, "Mohawk Core BA"}, + {HPHW_BA, 0x045, 0x00081, 0x0, "Rocky1 Core BA"}, + {HPHW_BA, 0x046, 0x00081, 0x0, "Rocky2 120 Core BA"}, + {HPHW_BA, 0x047, 0x00081, 0x0, "Rocky2 150 Core BA"}, + {HPHW_BA, 0x04B, 0x00081, 0x0, "Anole L2 132 Core BA"}, + {HPHW_BA, 0x04D, 0x00081, 0x0, "Anole L2 165 Core BA"}, + {HPHW_BA, 0x04E, 0x00081, 0x0, "Kiji L2 132 Core BA"}, + {HPHW_BA, 0x050, 0x00081, 0x0, "Merlin Jr 132 Core BA"}, + {HPHW_BA, 0x051, 0x00081, 0x0, "Firehawk Core BA"}, + {HPHW_BA, 0x056, 0x00081, 0x0, "Raven+ w SE FWSCSI Core BA"}, + {HPHW_BA, 0x057, 0x00081, 0x0, "Raven+ w Diff FWSCSI Core BA"}, + {HPHW_BA, 0x058, 0x00081, 0x0, "FireHawk 200 Core BA"}, + {HPHW_BA, 0x05C, 0x00081, 0x0, "SummitHawk 230 Core BA"}, + {HPHW_BA, 0x05E, 0x00081, 0x0, "Staccato 132 Core BA"}, + {HPHW_BA, 0x05E, 0x00081, 0x0, "Staccato 180 Core BA"}, + {HPHW_BA, 0x05F, 0x00081, 0x0, "Staccato 180 Lasi"}, + {HPHW_BA, 0x800, 0x00081, 0x0, "Hitachi Tiny 64 Core BA"}, + {HPHW_BA, 0x801, 0x00081, 0x0, "Hitachi Tiny 80 Core BA"}, + {HPHW_BA, 0x004, 0x0008B, 0x0, "Anole Optional PCMCIA BA"}, + {HPHW_BA, 0x004, 0x0008E, 0x0, "GSC ITR Wax BA"}, + {HPHW_BA, 0x00C, 0x0008E, 0x0, "Gecko Optional Wax BA"}, + {HPHW_BA, 0x010, 0x0008E, 0x0, "Pace Wax BA"}, + {HPHW_BA, 0x011, 0x0008E, 0x0, "SuperPace Wax BA"}, + {HPHW_BA, 0x012, 0x0008E, 0x0, "Mirage Jr Wax BA"}, + {HPHW_BA, 0x013, 0x0008E, 0x0, "Mirage Wax BA"}, + {HPHW_BA, 0x014, 0x0008E, 0x0, "Electra Wax BA"}, + {HPHW_BA, 0x017, 0x0008E, 0x0, "Raven Backplane Wax BA"}, + {HPHW_BA, 0x01E, 0x0008E, 0x0, "Raven T' Wax BA"}, + {HPHW_BA, 0x01F, 0x0008E, 0x0, "SkyHawk Wax BA"}, + {HPHW_BA, 0x023, 0x0008E, 0x0, "Rocky1 Wax BA"}, + {HPHW_BA, 0x02B, 0x0008E, 0x0, "Mirage 80 Wax BA"}, + {HPHW_BA, 0x02C, 0x0008E, 0x0, "Mirage 100+ Wax BA"}, + {HPHW_BA, 0x030, 0x0008E, 0x0, "UL 350 Core Wax BA"}, + {HPHW_BA, 0x031, 0x0008E, 0x0, "UL 550 Core Wax BA"}, + {HPHW_BA, 0x034, 0x0008E, 0x0, "SAIC L-80 Wax BA"}, + {HPHW_BA, 0x03A, 0x0008E, 0x0, "Merlin+ Wax BA"}, + {HPHW_BA, 0x040, 0x0008E, 0x0, "Merlin 132 Wax BA"}, + {HPHW_BA, 0x041, 0x0008E, 0x0, "Merlin 160 Wax BA"}, + {HPHW_BA, 0x043, 0x0008E, 0x0, "Merlin 132/160 Wax BA"}, + {HPHW_BA, 0x052, 0x0008E, 0x0, "Raven+ Hi Power Backplane w/EISA Wax BA"}, + {HPHW_BA, 0x054, 0x0008E, 0x0, "Raven+ Lo Power Backplane w/EISA Wax BA"}, + {HPHW_BA, 0x059, 0x0008E, 0x0, "FireHawk 200 Wax BA"}, + {HPHW_BA, 0x05A, 0x0008E, 0x0, "Raven+ L2 Backplane w/EISA Wax BA"}, + {HPHW_BA, 0x05D, 0x0008E, 0x0, "SummitHawk Wax BA"}, + {HPHW_BA, 0x800, 0x0008E, 0x0, "Hitachi Tiny 64 Wax BA"}, + {HPHW_BA, 0x801, 0x0008E, 0x0, "Hitachi Tiny 80 Wax BA"}, + {HPHW_BA, 0x011, 0x00090, 0x0, "SuperPace Wax EISA BA"}, + {HPHW_BA, 0x017, 0x00090, 0x0, "Raven Backplane Wax EISA BA"}, + {HPHW_BA, 0x01E, 0x00090, 0x0, "Raven T' Wax EISA BA"}, + {HPHW_BA, 0x01F, 0x00090, 0x0, "SkyHawk 100/120 Wax EISA BA"}, + {HPHW_BA, 0x027, 0x00090, 0x0, "Piranha 100 Wax EISA BA"}, + {HPHW_BA, 0x028, 0x00090, 0x0, "Mirage Jr Wax EISA BA"}, + {HPHW_BA, 0x029, 0x00090, 0x0, "Mirage Wax EISA BA"}, + {HPHW_BA, 0x02A, 0x00090, 0x0, "Electra Wax EISA BA"}, + {HPHW_BA, 0x02B, 0x00090, 0x0, "Mirage 80 Wax EISA BA"}, + {HPHW_BA, 0x02C, 0x00090, 0x0, "Mirage 100+ Wax EISA BA"}, + {HPHW_BA, 0x030, 0x00090, 0x0, "UL 350 Wax EISA BA"}, + {HPHW_BA, 0x031, 0x00090, 0x0, "UL 550 Wax EISA BA"}, + {HPHW_BA, 0x034, 0x00090, 0x0, "SAIC L-80 Wax EISA BA"}, + {HPHW_BA, 0x03A, 0x00090, 0x0, "Merlin+ Wax EISA BA"}, + {HPHW_BA, 0x040, 0x00090, 0x0, "Merlin 132 Wax EISA BA"}, + {HPHW_BA, 0x041, 0x00090, 0x0, "Merlin 160 Wax EISA BA"}, + {HPHW_BA, 0x043, 0x00090, 0x0, "Merlin 132/160 Wax EISA BA"}, + {HPHW_BA, 0x052, 0x00090, 0x0, "Raven Hi Power Backplane Wax EISA BA"}, + {HPHW_BA, 0x054, 0x00090, 0x0, "Raven Lo Power Backplane Wax EISA BA"}, + {HPHW_BA, 0x059, 0x00090, 0x0, "FireHawk 200 Wax EISA BA"}, + {HPHW_BA, 0x05A, 0x00090, 0x0, "Raven L2 Backplane Wax EISA BA"}, + {HPHW_BA, 0x05D, 0x00090, 0x0, "SummitHawk Wax EISA BA"}, + {HPHW_BA, 0x800, 0x00090, 0x0, "Hitachi Tiny 64 Wax EISA BA"}, + {HPHW_BA, 0x801, 0x00090, 0x0, "Hitachi Tiny 80 Wax EISA BA"}, + {HPHW_BA, 0x01A, 0x00093, 0x0, "Anole 64 TIMI BA"}, + {HPHW_BA, 0x01B, 0x00093, 0x0, "Anole 100 TIMI BA"}, + {HPHW_BA, 0x034, 0x00093, 0x0, "Anole T TIMI BA"}, + {HPHW_BA, 0x04A, 0x00093, 0x0, "Anole L2 132 TIMI BA"}, + {HPHW_BA, 0x04C, 0x00093, 0x0, "Anole L2 165 TIMI BA"}, + {HPHW_BA, 0x582, 0x000A5, 0x00, "Epic PCI Bridge"}, + {HPHW_BCPORT, 0x504, 0x00000, 0x00, "Phantom PseudoBC GSC+ Port"}, + {HPHW_BCPORT, 0x505, 0x00000, 0x00, "Phantom PseudoBC GSC+ Port"}, + {HPHW_BCPORT, 0x503, 0x0000C, 0x00, "Java BC GSC+ Port"}, + {HPHW_BCPORT, 0x57F, 0x0000C, 0x00, "Hitachi Ghostview GSC+ Port"}, + {HPHW_BCPORT, 0x501, 0x0000C, 0x00, "U2-IOA BC GSC+ Port"}, + {HPHW_BCPORT, 0x502, 0x0000C, 0x00, "Uturn-IOA BC GSC+ Port"}, + {HPHW_BCPORT, 0x780, 0x0000C, 0x00, "Astro BC Ropes Port"}, + {HPHW_BCPORT, 0x506, 0x0000C, 0x00, "NEC-IOS BC HSC Port"}, + {HPHW_BCPORT, 0x004, 0x0000C, 0x00, "Cheetah BC SMB Port"}, + {HPHW_BCPORT, 0x006, 0x0000C, 0x00, "Cheetah BC MID_BUS Port"}, + {HPHW_BCPORT, 0x005, 0x0000C, 0x00, "Condor BC MID_BUS Port"}, + {HPHW_BCPORT, 0x100, 0x0000C, 0x00, "Condor BC HP-PB Port"}, + {HPHW_BCPORT, 0x184, 0x0000C, 0x00, "Summit BC Port"}, + {HPHW_BCPORT, 0x101, 0x0000C, 0x00, "Summit BC HP-PB Port"}, + {HPHW_BCPORT, 0x102, 0x0000C, 0x00, "HP-PB Port (prefetch)"}, + {HPHW_BCPORT, 0x500, 0x0000C, 0x00, "Gecko BOA BC GSC+ Port"}, + {HPHW_BCPORT, 0x103, 0x0000C, 0x00, "Gecko BOA BC HP-PB Port"}, + {HPHW_BCPORT, 0x507, 0x0000C, 0x00, "Keyaki BC GSC+ Port"}, + {HPHW_BCPORT, 0x508, 0x0000C, 0x00, "Keyaki-DX BC GSC+ Port"}, + {HPHW_BCPORT, 0x584, 0x0000C, 0x10, "DEW BC Runway Port"}, + {HPHW_BCPORT, 0x800, 0x0000C, 0x10, "DEW BC Merced Port"}, + {HPHW_BCPORT, 0x801, 0x0000C, 0x10, "SMC Bus Interface Merced Bus0"}, + {HPHW_BCPORT, 0x802, 0x0000C, 0x10, "SMC Bus INterface Merced Bus1"}, + {HPHW_BCPORT, 0x803, 0x0000C, 0x10, "IKE I/O BC Merced Port"}, + {HPHW_BCPORT, 0x781, 0x0000C, 0x00, "IKE I/O BC Ropes Port"}, + {HPHW_BCPORT, 0x804, 0x0000C, 0x10, "REO I/O BC Merced Port"}, + {HPHW_BCPORT, 0x782, 0x0000C, 0x00, "REO I/O BC Ropes Port"}, + {HPHW_BCPORT, 0x784, 0x0000C, 0x00, "Pluto I/O BC Ropes Port"}, + {HPHW_BRIDGE, 0x680, 0x0000A, 0x00, "Dino PCI Bridge"}, + {HPHW_BRIDGE, 0x682, 0x0000A, 0x00, "Cujo PCI Bridge"}, + {HPHW_BRIDGE, 0x782, 0x0000A, 0x00, "Elroy PCI Bridge"}, + {HPHW_BRIDGE, 0x583, 0x000A5, 0x00, "Saga PCI Bridge"}, + {HPHW_BRIDGE, 0x783, 0x0000A, 0x00, "Mercury PCI Bridge"}, + {HPHW_BRIDGE, 0x784, 0x0000A, 0x00, "Quicksilver AGP Bridge"}, + {HPHW_B_DMA, 0x004, 0x00018, 0x00, "Parallel I/O"}, + {HPHW_B_DMA, 0x004, 0x00019, 0x00, "Parallel RDB"}, + {HPHW_B_DMA, 0x004, 0x00020, 0x80, "MID_BUS PSI"}, + {HPHW_B_DMA, 0x004, 0x0002F, 0x80, "HP-PB Transit PSI (36960A)"}, + {HPHW_B_DMA, 0x008, 0x00051, 0x80, "HP-PB Transit 802.3"}, + {HPHW_B_DMA, 0x004, 0x00052, 0x80, "Miura LAN/Console (J2146A)"}, + {HPHW_B_DMA, 0x008, 0x00058, 0x80, "HP-PB Transit 802.4"}, + {HPHW_B_DMA, 0x005, 0x00060, 0x80, "KittyHawk CSY Core LAN/Console"}, + {HPHW_B_DMA, 0x014, 0x00060, 0x80, "Diablo LAN/Console"}, + {HPHW_B_DMA, 0x054, 0x00060, 0x80, "Countach LAN/Console"}, + {HPHW_B_DMA, 0x004, 0x00094, 0x80, "KittyHawk GSC+ Exerciser"}, + {HPHW_B_DMA, 0x004, 0x00100, 0x80, "HP-PB HF Interface"}, + {HPHW_B_DMA, 0x000, 0x00206, 0x80, "MELCO HMPHA"}, + {HPHW_B_DMA, 0x005, 0x00206, 0x80, "MELCO HMPHA_10"}, + {HPHW_B_DMA, 0x006, 0x00206, 0x80, "MELCO HMQHA"}, + {HPHW_B_DMA, 0x007, 0x00206, 0x80, "MELCO HMQHA_10"}, + {HPHW_B_DMA, 0x004, 0x207, 0x80, "MELCO HNDWA MDWS-70"}, + {HPHW_CIO, 0x004, 0x00010, 0x00, "VLSI CIO"}, + {HPHW_CIO, 0x005, 0x00010, 0x00, "Silverfox CIO"}, + {HPHW_CIO, 0x006, 0x00010, 0x00, "Emerald CIO"}, + {HPHW_CIO, 0x008, 0x00010, 0x00, "Discrete CIO"}, + {HPHW_CONSOLE, 0x004, 0x0001C, 0x00, "Cheetah console"}, + {HPHW_CONSOLE, 0x005, 0x0001C, 0x00, "Emerald console"}, + {HPHW_CONSOLE, 0x01A, 0x0001F, 0x00, "Jason/Anole 64 Null Console"}, + {HPHW_CONSOLE, 0x01B, 0x0001F, 0x00, "Jason/Anole 100 Null Console"}, + {HPHW_FABRIC, 0x004, 0x000AA, 0x80, "Halfdome DNA Central Agent"}, + {HPHW_FABRIC, 0x007, 0x000AA, 0x80, "Caribe DNA Central Agent"}, + {HPHW_FABRIC, 0x004, 0x000AB, 0x00, "Halfdome TOGO Fabric Crossbar"}, + {HPHW_FABRIC, 0x004, 0x000AC, 0x00, "Halfdome Sakura Fabric Router"}, + {HPHW_FIO, 0x025, 0x0002E, 0x80, "Armyknife Optional X.25"}, + {HPHW_FIO, 0x004, 0x0004F, 0x0, "8-Port X.25 EISA-ACC (AMSO)"}, + {HPHW_FIO, 0x004, 0x00071, 0x0, "Cobra Core SCSI"}, + {HPHW_FIO, 0x005, 0x00071, 0x0, "Coral Core SCSI"}, + {HPHW_FIO, 0x006, 0x00071, 0x0, "Bushmaster Core SCSI"}, + {HPHW_FIO, 0x007, 0x00071, 0x0, "Scorpio Core SCSI"}, + {HPHW_FIO, 0x008, 0x00071, 0x0, "Flounder Core SCSI"}, + {HPHW_FIO, 0x009, 0x00071, 0x0, "Outfield Core SCSI"}, + {HPHW_FIO, 0x00A, 0x00071, 0x0, "CoralII Core SCSI"}, + {HPHW_FIO, 0x00B, 0x00071, 0x0, "Scorpio Jr. Core SCSI"}, + {HPHW_FIO, 0x00C, 0x00071, 0x0, "Strider-50 Core SCSI"}, + {HPHW_FIO, 0x00D, 0x00071, 0x0, "Strider-33 Core SCSI"}, + {HPHW_FIO, 0x00E, 0x00071, 0x0, "Trailways-50 Core SCSI"}, + {HPHW_FIO, 0x00F, 0x00071, 0x0, "Trailways-33 Core SCSI"}, + {HPHW_FIO, 0x010, 0x00071, 0x0, "Pace Core SCSI"}, + {HPHW_FIO, 0x011, 0x00071, 0x0, "Sidewinder Core SCSI"}, + {HPHW_FIO, 0x019, 0x00071, 0x0, "Scorpio Sr. Core SCSI"}, + {HPHW_FIO, 0x020, 0x00071, 0x0, "Scorpio 100 Core SCSI"}, + {HPHW_FIO, 0x021, 0x00071, 0x0, "Spectra 50 Core SCSI"}, + {HPHW_FIO, 0x022, 0x00071, 0x0, "Spectra 75 Core SCSI"}, + {HPHW_FIO, 0x023, 0x00071, 0x0, "Spectra 100 Core SCSI"}, + {HPHW_FIO, 0x024, 0x00071, 0x0, "Fast Pace Core SCSI"}, + {HPHW_FIO, 0x026, 0x00071, 0x0, "CoralII Jaguar Core SCSI"}, + {HPHW_FIO, 0x004, 0x00072, 0x0, "Cobra Core LAN (802.3)"}, + {HPHW_FIO, 0x005, 0x00072, 0x0, "Coral Core LAN (802.3)"}, + {HPHW_FIO, 0x006, 0x00072, 0x0, "Bushmaster Core LAN (802.3)"}, + {HPHW_FIO, 0x007, 0x00072, 0x0, "Scorpio Core LAN (802.3)"}, + {HPHW_FIO, 0x008, 0x00072, 0x0, "Flounder Core LAN (802.3)"}, + {HPHW_FIO, 0x009, 0x00072, 0x0, "Outfield Core LAN (802.3)"}, + {HPHW_FIO, 0x00A, 0x00072, 0x0, "CoralII Core LAN (802.3)"}, + {HPHW_FIO, 0x00B, 0x00072, 0x0, "Scorpio Jr. Core LAN (802.3)"}, + {HPHW_FIO, 0x00C, 0x00072, 0x0, "Strider-50 Core LAN (802.3)"}, + {HPHW_FIO, 0x00D, 0x00072, 0x0, "Strider-33 Core LAN (802.3)"}, + {HPHW_FIO, 0x00E, 0x00072, 0x0, "Trailways-50 Core LAN (802.3)"}, + {HPHW_FIO, 0x00F, 0x00072, 0x0, "Trailways-33 Core LAN (802.3)"}, + {HPHW_FIO, 0x010, 0x00072, 0x0, "Pace Core LAN (802.3)"}, + {HPHW_FIO, 0x011, 0x00072, 0x0, "Sidewinder Core LAN (802.3)"}, + {HPHW_FIO, 0x019, 0x00072, 0x0, "Scorpio Sr. Core LAN (802.3)"}, + {HPHW_FIO, 0x020, 0x00072, 0x0, "Scorpio 100 Core LAN (802.3)"}, + {HPHW_FIO, 0x021, 0x00072, 0x0, "Spectra 50 Core LAN (802.3)"}, + {HPHW_FIO, 0x022, 0x00072, 0x0, "Spectra 75 Core LAN (802.3)"}, + {HPHW_FIO, 0x023, 0x00072, 0x0, "Spectra 100 Core LAN (802.3)"}, + {HPHW_FIO, 0x024, 0x00072, 0x0, "Fast Pace Core LAN (802.3)"}, + {HPHW_FIO, 0x026, 0x00072, 0x0, "CoralII Jaguar Core LAN (802.3)"}, + {HPHW_FIO, 0x004, 0x00073, 0x0, "Cobra Core HIL"}, + {HPHW_FIO, 0x005, 0x00073, 0x0, "Coral Core HIL"}, + {HPHW_FIO, 0x006, 0x00073, 0x0, "Bushmaster Core HIL"}, + {HPHW_FIO, 0x007, 0x00073, 0x0, "Scorpio Core HIL"}, + {HPHW_FIO, 0x008, 0x00073, 0x0, "Flounder Core HIL"}, + {HPHW_FIO, 0x009, 0x00073, 0x0, "Outfield Core HIL"}, + {HPHW_FIO, 0x00A, 0x00073, 0x0, "CoralII Core HIL"}, + {HPHW_FIO, 0x00B, 0x00073, 0x0, "Scorpio Jr. Core HIL"}, + {HPHW_FIO, 0x00C, 0x00073, 0x0, "Strider-50 Core HIL"}, + {HPHW_FIO, 0x00D, 0x00073, 0x0, "Strider-33 Core HIL"}, + {HPHW_FIO, 0x00E, 0x00073, 0x0, "Trailways-50 Core HIL"}, + {HPHW_FIO, 0x00F, 0x00073, 0x0, "Trailways-33 Core HIL"}, + {HPHW_FIO, 0x010, 0x00073, 0x0, "Pace Core HIL"}, + {HPHW_FIO, 0x011, 0x00073, 0xcc, "SuperPace Wax HIL"}, + {HPHW_FIO, 0x012, 0x00073, 0x0, "Mirage Jr Wax HIL"}, + {HPHW_FIO, 0x013, 0x00073, 0x0, "Mirage 100 Wax HIL"}, + {HPHW_FIO, 0x014, 0x00073, 0x0, "Electra Wax HIL"}, + {HPHW_FIO, 0x017, 0x00073, 0x0, "Raven Backplane Wax HIL"}, + {HPHW_FIO, 0x019, 0x00073, 0x0, "Scorpio Sr. Core HIL"}, + {HPHW_FIO, 0x01E, 0x00073, 0x0, "Raven T' Wax HIL"}, + {HPHW_FIO, 0x01F, 0x00073, 0x0, "SkyHawk 100/120 Wax HIL"}, + {HPHW_FIO, 0x020, 0x00073, 0x0, "Scorpio 100 Core HIL"}, + {HPHW_FIO, 0x021, 0x00073, 0x0, "Spectra 50 Core HIL"}, + {HPHW_FIO, 0x022, 0x00073, 0x0, "Spectra 75 Core HIL"}, + {HPHW_FIO, 0x023, 0x00073, 0x0, "Spectra 100 Core HIL"}, + {HPHW_FIO, 0x024, 0x00073, 0x0, "Fast Pace Core HIL"}, + {HPHW_FIO, 0x026, 0x00073, 0x0, "CoralII Jaguar Core HIL"}, + {HPHW_FIO, 0x02B, 0x00073, 0x0, "Mirage 80 Wax HIL"}, + {HPHW_FIO, 0x02C, 0x00073, 0x0, "Mirage 100+ Wax HIL"}, + {HPHW_FIO, 0x03A, 0x00073, 0x0, "Merlin+ Wax HIL"}, + {HPHW_FIO, 0x040, 0x00073, 0x0, "Merlin 132 Wax HIL"}, + {HPHW_FIO, 0x041, 0x00073, 0x0, "Merlin 160 Wax HIL"}, + {HPHW_FIO, 0x043, 0x00073, 0x0, "Merlin 132/160 Wax HIL"}, + {HPHW_FIO, 0x052, 0x00073, 0x0, "Raven+ Hi Power Backplane w/EISA Wax HIL"}, + {HPHW_FIO, 0x053, 0x00073, 0x0, "Raven+ Hi Power Backplane wo/EISA Wax HIL"}, + {HPHW_FIO, 0x054, 0x00073, 0x0, "Raven+ Lo Power Backplane w/EISA Wax HIL"}, + {HPHW_FIO, 0x055, 0x00073, 0x0, "Raven+ Lo Power Backplane wo/EISA Wax HIL"}, + {HPHW_FIO, 0x059, 0x00073, 0x0, "FireHawk 200 Wax HIL"}, + {HPHW_FIO, 0x05A, 0x00073, 0x0, "Raven+ L2 Backplane w/EISA Wax HIL"}, + {HPHW_FIO, 0x05B, 0x00073, 0x0, "Raven+ L2 Backplane wo/EISA Wax HIL"}, + {HPHW_FIO, 0x05D, 0x00073, 0x0, "SummitHawk Wax HIL"}, + {HPHW_FIO, 0x800, 0x00073, 0x0, "Hitachi Tiny 64 Wax HIL"}, + {HPHW_FIO, 0x801, 0x00073, 0x0, "Hitachi Tiny 80 Wax HIL"}, + {HPHW_FIO, 0x004, 0x00074, 0x0, "Cobra Core Centronics"}, + {HPHW_FIO, 0x005, 0x00074, 0x0, "Coral Core Centronics"}, + {HPHW_FIO, 0x006, 0x00074, 0x0, "Bushmaster Core Centronics"}, + {HPHW_FIO, 0x007, 0x00074, 0x0, "Scorpio Core Centronics"}, + {HPHW_FIO, 0x008, 0x00074, 0x0, "Flounder Core Centronics"}, + {HPHW_FIO, 0x009, 0x00074, 0x0, "Outfield Core Centronics"}, + {HPHW_FIO, 0x00A, 0x00074, 0x0, "CoralII Core Centronics"}, + {HPHW_FIO, 0x00B, 0x00074, 0x0, "Scorpio Jr. Core Centronics"}, + {HPHW_FIO, 0x00C, 0x00074, 0x0, "Strider-50 Core Centronics"}, + {HPHW_FIO, 0x00D, 0x00074, 0x0, "Strider-33 Core Centronics"}, + {HPHW_FIO, 0x00E, 0x00074, 0x0, "Trailways-50 Core Centronics"}, + {HPHW_FIO, 0x00F, 0x00074, 0x0, "Trailways-33 Core Centronics"}, + {HPHW_FIO, 0x010, 0x00074, 0x0, "Pace Core Centronics"}, + {HPHW_FIO, 0x011, 0x00074, 0x0, "Sidewinder Core Centronics"}, + {HPHW_FIO, 0x015, 0x00074, 0x0, "KittyHawk GSY Core Centronics"}, + {HPHW_FIO, 0x016, 0x00074, 0x0, "Gecko Core Centronics"}, + {HPHW_FIO, 0x019, 0x00074, 0x0, "Scorpio Sr. Core Centronics"}, + {HPHW_FIO, 0x01A, 0x00074, 0x0, "Anole 64 Core Centronics"}, + {HPHW_FIO, 0x01B, 0x00074, 0x0, "Anole 100 Core Centronics"}, + {HPHW_FIO, 0x01C, 0x00074, 0x0, "Gecko 80 Core Centronics"}, + {HPHW_FIO, 0x01D, 0x00074, 0x0, "Gecko 100 Core Centronics"}, + {HPHW_FIO, 0x01F, 0x00074, 0x0, "SkyHawk 100/120 Core Centronics"}, + {HPHW_FIO, 0x020, 0x00074, 0x0, "Scorpio 100 Core Centronics"}, + {HPHW_FIO, 0x021, 0x00074, 0x0, "Spectra 50 Core Centronics"}, + {HPHW_FIO, 0x022, 0x00074, 0x0, "Spectra 75 Core Centronics"}, + {HPHW_FIO, 0x023, 0x00074, 0x0, "Spectra 100 Core Centronics"}, + {HPHW_FIO, 0x024, 0x00074, 0x0, "Fast Pace Core Centronics"}, + {HPHW_FIO, 0x026, 0x00074, 0x0, "CoralII Jaguar Core Centronics"}, + {HPHW_FIO, 0x027, 0x00074, 0x0, "Piranha 100 Core Centronics"}, + {HPHW_FIO, 0x028, 0x00074, 0x0, "Mirage Jr Core Centronics"}, + {HPHW_FIO, 0x029, 0x00074, 0x0, "Mirage Core Centronics"}, + {HPHW_FIO, 0x02A, 0x00074, 0x0, "Electra Core Centronics"}, + {HPHW_FIO, 0x02B, 0x00074, 0x0, "Mirage 80 Core Centronics"}, + {HPHW_FIO, 0x02C, 0x00074, 0x0, "Mirage 100+ Core Centronics"}, + {HPHW_FIO, 0x02E, 0x00074, 0x0, "UL 350 Core Centronics"}, + {HPHW_FIO, 0x02F, 0x00074, 0x0, "UL 550 Core Centronics"}, + {HPHW_FIO, 0x032, 0x00074, 0x0, "Raven T' Core Centronics"}, + {HPHW_FIO, 0x033, 0x00074, 0x0, "Anole T Core Centronics"}, + {HPHW_FIO, 0x034, 0x00074, 0x0, "SAIC L-80 Core Centronics"}, + {HPHW_FIO, 0x035, 0x00074, 0x0, "PCX-L2 712/132 Core Centronics"}, + {HPHW_FIO, 0x036, 0x00074, 0x0, "PCX-L2 712/160 Core Centronics"}, + {HPHW_FIO, 0x03B, 0x00074, 0x0, "Raven U/L2 Core Centronics"}, + {HPHW_FIO, 0x03C, 0x00074, 0x0, "Merlin 132 Core Centronics"}, + {HPHW_FIO, 0x03D, 0x00074, 0x0, "Merlin 160 Core Centronics"}, + {HPHW_FIO, 0x03E, 0x00074, 0x0, "Merlin+ 132 Core Centronics"}, + {HPHW_FIO, 0x03F, 0x00074, 0x0, "Merlin+ 180 Core Centronics"}, + {HPHW_FIO, 0x044, 0x00074, 0x0, "Mohawk Core Centronics"}, + {HPHW_FIO, 0x045, 0x00074, 0x0, "Rocky1 Core Centronics"}, + {HPHW_FIO, 0x046, 0x00074, 0x0, "Rocky2 120 Core Centronics"}, + {HPHW_FIO, 0x047, 0x00074, 0x0, "Rocky2 150 Core Centronics"}, + {HPHW_FIO, 0x04B, 0x00074, 0x0, "Anole L2 132 Core Centronics"}, + {HPHW_FIO, 0x04D, 0x00074, 0x0, "Anole L2 165 Core Centronics"}, + {HPHW_FIO, 0x050, 0x00074, 0x0, "Merlin Jr 132 Core Centronics"}, + {HPHW_FIO, 0x051, 0x00074, 0x0, "Firehawk Core Centronics"}, + {HPHW_FIO, 0x056, 0x00074, 0x0, "Raven+ w SE FWSCSI Core Centronics"}, + {HPHW_FIO, 0x057, 0x00074, 0x0, "Raven+ w Diff FWSCSI Core Centronics"}, + {HPHW_FIO, 0x058, 0x00074, 0x0, "FireHawk 200 Core Centronics"}, + {HPHW_FIO, 0x05C, 0x00074, 0x0, "SummitHawk 230 Core Centronics"}, + {HPHW_FIO, 0x800, 0x00074, 0x0, "Hitachi Tiny 64 Core Centronics"}, + {HPHW_FIO, 0x801, 0x00074, 0x0, "Hitachi Tiny 80 Core Centronics"}, + {HPHW_FIO, 0x004, 0x00075, 0x0, "Cobra Core RS-232"}, + {HPHW_FIO, 0x005, 0x00075, 0x0, "Coral Core RS-232"}, + {HPHW_FIO, 0x006, 0x00075, 0x0, "Bushmaster Core RS-232"}, + {HPHW_FIO, 0x007, 0x00075, 0x0, "Scorpio Core RS-232"}, + {HPHW_FIO, 0x008, 0x00075, 0x0, "Flounder Core RS-232"}, + {HPHW_FIO, 0x009, 0x00075, 0x0, "Outfield Core RS-232"}, + {HPHW_FIO, 0x00A, 0x00075, 0x0, "CoralII Core RS-232"}, + {HPHW_FIO, 0x00B, 0x00075, 0x0, "Scorpio Jr. Core RS-232"}, + {HPHW_FIO, 0x00C, 0x00075, 0x0, "Strider-50 Core RS-232"}, + {HPHW_FIO, 0x00D, 0x00075, 0x0, "Strider-33 Core RS-232"}, + {HPHW_FIO, 0x00E, 0x00075, 0x0, "Trailways-50 Core RS-232"}, + {HPHW_FIO, 0x00F, 0x00075, 0x0, "Trailways-33 Core RS-232"}, + {HPHW_FIO, 0x010, 0x00075, 0x0, "Pace Core RS-232"}, + {HPHW_FIO, 0x011, 0x00075, 0x0, "Sidewinder Core RS-232"}, + {HPHW_FIO, 0x019, 0x00075, 0x0, "Scorpio Sr. Core RS-232"}, + {HPHW_FIO, 0x020, 0x00075, 0x0, "Scorpio 100 Core RS-232"}, + {HPHW_FIO, 0x021, 0x00075, 0x0, "Spectra 50 Core RS-232"}, + {HPHW_FIO, 0x022, 0x00075, 0x0, "Spectra 75 Core RS-232"}, + {HPHW_FIO, 0x023, 0x00075, 0x0, "Spectra 100 Core RS-232"}, + {HPHW_FIO, 0x024, 0x00075, 0x0, "Fast Pace Core RS-232"}, + {HPHW_FIO, 0x026, 0x00075, 0x0, "CoralII Jaguar Core RS-232"}, + {HPHW_FIO, 0x004, 0x00077, 0x0, "Coral SGC Graphics"}, + {HPHW_FIO, 0x005, 0x00077, 0x0, "Hyperdrive Optional Graphics"}, + {HPHW_FIO, 0x006, 0x00077, 0x0, "Stinger Optional Graphics"}, + {HPHW_FIO, 0x007, 0x00077, 0x0, "Scorpio Builtin Graphics"}, + {HPHW_FIO, 0x008, 0x00077, 0x0, "Anole Hyperdrive Optional Graphics"}, + {HPHW_FIO, 0x009, 0x00077, 0x0, "Thunder II graphics EISA form"}, + {HPHW_FIO, 0x00A, 0x00077, 0x0, "Thunder II graphics GSA form"}, + {HPHW_FIO, 0x00B, 0x00077, 0x0, "Scorpio Jr Builtin Graphics"}, + {HPHW_FIO, 0x00C, 0x00077, 0x0, "Strider-50 SSC Graphics"}, + {HPHW_FIO, 0x00D, 0x00077, 0x0, "Strider-33 SSC Graphics"}, + {HPHW_FIO, 0x00E, 0x00077, 0x0, "Trailways-50 SSC Graphics"}, + {HPHW_FIO, 0x00F, 0x00077, 0x0, "Trailways-33 SSC Graphics"}, + {HPHW_FIO, 0x010, 0x00077, 0x0, "Pace SGC Graphics"}, + {HPHW_FIO, 0x011, 0x00077, 0x0, "Mohawk Opt. 2D Graphics (Kid)"}, + {HPHW_FIO, 0x012, 0x00077, 0x0, "Raven Opt. 2D Graphics (Goat)"}, + {HPHW_FIO, 0x016, 0x00077, 0x0, "Lego 24 SCG Graphics"}, + {HPHW_FIO, 0x017, 0x00077, 0x0, "Lego 24Z SCG Graphics"}, + {HPHW_FIO, 0x018, 0x00077, 0x0, "Lego 48Z SCG Graphics"}, + {HPHW_FIO, 0x019, 0x00077, 0x0, "Scorpio Sr Builtin Graphics"}, + {HPHW_FIO, 0x020, 0x00077, 0x0, "Scorpio 100 Builtin Graphics"}, + {HPHW_FIO, 0x021, 0x00077, 0x0, "Spectra 50 Builtin Graphics"}, + {HPHW_FIO, 0x022, 0x00077, 0x0, "Spectra 75 Builtin Graphics"}, + {HPHW_FIO, 0x023, 0x00077, 0x0, "Spectra 100 Builtin Graphics"}, + {HPHW_FIO, 0x024, 0x00077, 0x0, "Fast Pace SGC Graphics"}, + {HPHW_FIO, 0x006, 0x0007A, 0x0, "Bushmaster Audio"}, + {HPHW_FIO, 0x008, 0x0007A, 0x0, "Flounder Audio"}, + {HPHW_FIO, 0x004, 0x0007B, 0x0, "UL Optional Audio"}, + {HPHW_FIO, 0x007, 0x0007B, 0x0, "Scorpio Audio"}, + {HPHW_FIO, 0x00B, 0x0007B, 0x0, "Scorpio Jr. Audio"}, + {HPHW_FIO, 0x00C, 0x0007B, 0x0, "Strider-50 Audio"}, + {HPHW_FIO, 0x00D, 0x0007B, 0x0, "Strider-33 Audio"}, + {HPHW_FIO, 0x00E, 0x0007B, 0x0, "Trailways-50 Audio"}, + {HPHW_FIO, 0x00F, 0x0007B, 0x0, "Trailways-33 Audio"}, + {HPHW_FIO, 0x015, 0x0007B, 0x0, "KittyHawk GSY Core Audio"}, + {HPHW_FIO, 0x016, 0x0007B, 0x0, "Gecko Audio"}, + {HPHW_FIO, 0x019, 0x0007B, 0x0, "Scorpio Sr. Audio"}, + {HPHW_FIO, 0x01A, 0x0007B, 0x0, "Anole 64 Audio"}, + {HPHW_FIO, 0x01B, 0x0007B, 0x0, "Anole 100 Audio"}, + {HPHW_FIO, 0x01C, 0x0007B, 0x0, "Gecko 80 Audio"}, + {HPHW_FIO, 0x01D, 0x0007B, 0x0, "Gecko 100 Audio"}, + {HPHW_FIO, 0x01F, 0x0007B, 0x0, "SkyHawk 100/120 Audio"}, + {HPHW_FIO, 0x020, 0x0007B, 0x0, "Scorpio 100 Audio"}, + {HPHW_FIO, 0x021, 0x0007B, 0x0, "Spectra 50 Audio"}, + {HPHW_FIO, 0x022, 0x0007B, 0x0, "Spectra 75 Audio"}, + {HPHW_FIO, 0x023, 0x0007B, 0x0, "Spectra 100 Audio"}, + {HPHW_FIO, 0x028, 0x0007B, 0x0, "Mirage Jr Audio"}, + {HPHW_FIO, 0x029, 0x0007B, 0x0, "Mirage Audio"}, + {HPHW_FIO, 0x02A, 0x0007B, 0x0, "Electra Audio"}, + {HPHW_FIO, 0x02B, 0x0007B, 0x0, "Mirage 80 Audio"}, + {HPHW_FIO, 0x02C, 0x0007B, 0x0, "Mirage 100+ Audio"}, + {HPHW_FIO, 0x032, 0x0007B, 0x0, "Raven T' Audio"}, + {HPHW_FIO, 0x034, 0x0007B, 0x0, "SAIC L-80 Audio"}, + {HPHW_FIO, 0x035, 0x0007B, 0x0, "PCX-L2 712/132 Core Audio"}, + {HPHW_FIO, 0x036, 0x0007B, 0x0, "PCX-L2 712/160 Core Audio"}, + {HPHW_FIO, 0x03B, 0x0007B, 0x0, "Raven U/L2 Core Audio"}, + {HPHW_FIO, 0x03C, 0x0007B, 0x0, "Merlin 132 Core Audio"}, + {HPHW_FIO, 0x03D, 0x0007B, 0x0, "Merlin 160 Core Audio"}, + {HPHW_FIO, 0x03E, 0x0007B, 0x0, "Merlin+ 132 Core Audio"}, + {HPHW_FIO, 0x03F, 0x0007B, 0x0, "Merlin+ 180 Core Audio"}, + {HPHW_FIO, 0x044, 0x0007B, 0x0, "Mohawk Core Audio"}, + {HPHW_FIO, 0x046, 0x0007B, 0x0, "Rocky2 120 Core Audio"}, + {HPHW_FIO, 0x047, 0x0007B, 0x0, "Rocky2 150 Core Audio"}, + {HPHW_FIO, 0x04B, 0x0007B, 0x0, "Anole L2 132 Core Audio"}, + {HPHW_FIO, 0x04D, 0x0007B, 0x0, "Anole L2 165 Core Audio"}, + {HPHW_FIO, 0x04E, 0x0007B, 0x0, "Kiji L2 132 Core Audio"}, + {HPHW_FIO, 0x050, 0x0007B, 0x0, "Merlin Jr 132 Core Audio"}, + {HPHW_FIO, 0x051, 0x0007B, 0x0, "Firehawk Audio"}, + {HPHW_FIO, 0x056, 0x0007B, 0x0, "Raven+ w SE FWSCSI Core Audio"}, + {HPHW_FIO, 0x057, 0x0007B, 0x0, "Raven+ w Diff FWSCSI Core Audio"}, + {HPHW_FIO, 0x058, 0x0007B, 0x0, "FireHawk 200 Audio"}, + {HPHW_FIO, 0x05C, 0x0007B, 0x0, "SummitHawk 230 Core Audio"}, + {HPHW_FIO, 0x800, 0x0007B, 0x0, "Hitachi Tiny 64 Audio"}, + {HPHW_FIO, 0x801, 0x0007B, 0x0, "Hitachi Tiny 80 Audio"}, + {HPHW_FIO, 0x009, 0x0007C, 0x0, "Outfield FW SCSI"}, + {HPHW_FIO, 0x00A, 0x0007C, 0x0, "CoralII FW SCSI"}, + {HPHW_FIO, 0x026, 0x0007C, 0x0, "CoralII Jaguar FW SCSI"}, + {HPHW_FIO, 0x009, 0x0007D, 0x0, "Outfield FDDI"}, + {HPHW_FIO, 0x00A, 0x0007D, 0x0, "CoralII FDDI"}, + {HPHW_FIO, 0x026, 0x0007D, 0x0, "CoralII Jaguar FDDI"}, + {HPHW_FIO, 0x010, 0x0007E, 0x0, "Pace Audio"}, + {HPHW_FIO, 0x024, 0x0007E, 0x0, "Fast Pace Audio"}, + {HPHW_FIO, 0x009, 0x0007F, 0x0, "Outfield Audio"}, + {HPHW_FIO, 0x00A, 0x0007F, 0x0, "CoralII Audio"}, + {HPHW_FIO, 0x026, 0x0007F, 0x0, "CoralII Jaguar Audio"}, + {HPHW_FIO, 0x010, 0x00080, 0x0, "Pace Core HPIB"}, + {HPHW_FIO, 0x024, 0x00080, 0x0, "Fast Pace Core HPIB"}, + {HPHW_FIO, 0x015, 0x00082, 0x0, "KittyHawk GSY Core SCSI"}, + {HPHW_FIO, 0x016, 0x00082, 0x0, "Gecko Core SCSI"}, + {HPHW_FIO, 0x01A, 0x00082, 0x0, "Anole 64 Core SCSI"}, + {HPHW_FIO, 0x01B, 0x00082, 0x0, "Anole 100 Core SCSI"}, + {HPHW_FIO, 0x01C, 0x00082, 0x0, "Gecko 80 Core SCSI"}, + {HPHW_FIO, 0x01D, 0x00082, 0x0, "Gecko 100 Core SCSI"}, + {HPHW_FIO, 0x01F, 0x00082, 0x0, "SkyHawk 100/120 Core SCSI"}, + {HPHW_FIO, 0x027, 0x00082, 0x0, "Piranha 100 Core SCSI"}, + {HPHW_FIO, 0x028, 0x00082, 0x0, "Mirage Jr Core SCSI"}, + {HPHW_FIO, 0x029, 0x00082, 0x0, "Mirage Core SCSI"}, + {HPHW_FIO, 0x02A, 0x00082, 0x0, "Electra Core SCSI"}, + {HPHW_FIO, 0x02B, 0x00082, 0x0, "Mirage 80 Core SCSI"}, + {HPHW_FIO, 0x02C, 0x00082, 0x0, "Mirage 100+ Core SCSI"}, + {HPHW_FIO, 0x02E, 0x00082, 0x0, "UL 350 Core SCSI"}, + {HPHW_FIO, 0x02F, 0x00082, 0x0, "UL 550 Core SCSI"}, + {HPHW_FIO, 0x032, 0x00082, 0x0, "Raven T' Core SCSI"}, + {HPHW_FIO, 0x033, 0x00082, 0x0, "Anole T Core SCSI"}, + {HPHW_FIO, 0x034, 0x00082, 0x0, "SAIC L-80 Core SCSI"}, + {HPHW_FIO, 0x035, 0x00082, 0x0, "PCX-L2 712/132 Core SCSI"}, + {HPHW_FIO, 0x036, 0x00082, 0x0, "PCX-L2 712/160 Core SCSI"}, + {HPHW_FIO, 0x03B, 0x00082, 0x0, "Raven U/L2 Core SCSI"}, + {HPHW_FIO, 0x03C, 0x00082, 0x0, "Merlin 132 Core SCSI"}, + {HPHW_FIO, 0x03D, 0x00082, 0x0, "Merlin 160 Core SCSI"}, + {HPHW_FIO, 0x03E, 0x00082, 0x0, "Merlin+ 132 Core SCSI"}, + {HPHW_FIO, 0x03F, 0x00082, 0x0, "Merlin+ 180 Core SCSI"}, + {HPHW_FIO, 0x044, 0x00082, 0x0, "Mohawk Core SCSI"}, + {HPHW_FIO, 0x045, 0x00082, 0x0, "Rocky1 Core SCSI"}, + {HPHW_FIO, 0x046, 0x00082, 0x0, "Rocky2 120 Core SCSI"}, + {HPHW_FIO, 0x047, 0x00082, 0x0, "Rocky2 150 Core SCSI"}, + {HPHW_FIO, 0x04B, 0x00082, 0x0, "Anole L2 132 Core SCSI"}, + {HPHW_FIO, 0x04D, 0x00082, 0x0, "Anole L2 165 Core SCSI"}, + {HPHW_FIO, 0x04E, 0x00082, 0x0, "Kiji L2 132 Core SCSI"}, + {HPHW_FIO, 0x050, 0x00082, 0x0, "Merlin Jr 132 Core SCSI"}, + {HPHW_FIO, 0x051, 0x00082, 0x0, "Firehawk Core SCSI"}, + {HPHW_FIO, 0x056, 0x00082, 0x0, "Raven+ w SE FWSCSI Core SCSI"}, + {HPHW_FIO, 0x057, 0x00082, 0x0, "Raven+ w Diff FWSCSI Core SCSI"}, + {HPHW_FIO, 0x058, 0x00082, 0x0, "FireHawk 200 Core SCSI"}, + {HPHW_FIO, 0x05C, 0x00082, 0x0, "SummitHawk 230 Core SCSI"}, + {HPHW_FIO, 0x05E, 0x00082, 0x0, "Staccato 132 Core SCSI"}, + {HPHW_FIO, 0x05F, 0x00082, 0x0, "Staccato 180 Core SCSI"}, + {HPHW_FIO, 0x800, 0x00082, 0x0, "Hitachi Tiny 64 Core SCSI"}, + {HPHW_FIO, 0x801, 0x00082, 0x0, "Hitachi Tiny 80 Core SCSI"}, + {HPHW_FIO, 0x016, 0x00083, 0x0, "Gecko Core PC Floppy"}, + {HPHW_FIO, 0x01C, 0x00083, 0x0, "Gecko 80 Core PC Floppy"}, + {HPHW_FIO, 0x01D, 0x00083, 0x0, "Gecko 100 Core PC Floppy"}, + {HPHW_FIO, 0x051, 0x00083, 0x0, "Firehawk Core PC Floppy"}, + {HPHW_FIO, 0x058, 0x00083, 0x0, "FireHawk 200 Core PC Floppy"}, + {HPHW_FIO, 0x027, 0x00083, 0x0, "Piranha 100 Core PC Floppy"}, + {HPHW_FIO, 0x028, 0x00083, 0x0, "Mirage Jr Core PC Floppy"}, + {HPHW_FIO, 0x029, 0x00083, 0x0, "Mirage Core PC Floppy"}, + {HPHW_FIO, 0x02A, 0x00083, 0x0, "Electra Core PC Floppy"}, + {HPHW_FIO, 0x02B, 0x00083, 0x0, "Mirage 80 Core PC Floppy"}, + {HPHW_FIO, 0x02C, 0x00083, 0x0, "Mirage 100+ Core PC Floppy"}, + {HPHW_FIO, 0x02E, 0x00083, 0x0, "UL 350 Core PC Floppy"}, + {HPHW_FIO, 0x02F, 0x00083, 0x0, "UL 550 Core PC Floppy"}, + {HPHW_FIO, 0x032, 0x00083, 0x0, "Raven T' Core PC Floppy"}, + {HPHW_FIO, 0x034, 0x00083, 0x0, "SAIC L-80 Core PC Floppy"}, + {HPHW_FIO, 0x035, 0x00083, 0x0, "PCX-L2 712/132 Core Floppy"}, + {HPHW_FIO, 0x036, 0x00083, 0x0, "PCX-L2 712/160 Core Floppy"}, + {HPHW_FIO, 0x03B, 0x00083, 0x0, "Raven U/L2 Core PC Floppy"}, + {HPHW_FIO, 0x03C, 0x00083, 0x0, "Merlin 132 Core PC Floppy"}, + {HPHW_FIO, 0x03D, 0x00083, 0x0, "Merlin 160 Core PC Floppy"}, + {HPHW_FIO, 0x03E, 0x00083, 0x0, "Merlin+ 132 Core PC Floppy"}, + {HPHW_FIO, 0x03F, 0x00083, 0x0, "Merlin+ 180 Core PC Floppy"}, + {HPHW_FIO, 0x045, 0x00083, 0x0, "Rocky1 Core PC Floppy"}, + {HPHW_FIO, 0x046, 0x00083, 0x0, "Rocky2 120 Core PC Floppy"}, + {HPHW_FIO, 0x047, 0x00083, 0x0, "Rocky2 150 Core PC Floppy"}, + {HPHW_FIO, 0x04E, 0x00083, 0x0, "Kiji L2 132 Core PC Floppy"}, + {HPHW_FIO, 0x050, 0x00083, 0x0, "Merlin Jr 132 Core PC Floppy"}, + {HPHW_FIO, 0x056, 0x00083, 0x0, "Raven+ w SE FWSCSI Core PC Floppy"}, + {HPHW_FIO, 0x057, 0x00083, 0x0, "Raven+ w Diff FWSCSI Core PC Floppy"}, + {HPHW_FIO, 0x800, 0x00083, 0x0, "Hitachi Tiny 64 Core PC Floppy"}, + {HPHW_FIO, 0x801, 0x00083, 0x0, "Hitachi Tiny 80 Core PC Floppy"}, + {HPHW_FIO, 0x015, 0x00084, 0x0, "KittyHawk GSY Core PS/2 Port"}, + {HPHW_FIO, 0x016, 0x00084, 0x0, "Gecko Core PS/2 Port"}, + {HPHW_FIO, 0x018, 0x00084, 0x0, "Gecko Optional PS/2 Port"}, + {HPHW_FIO, 0x01A, 0x00084, 0x0, "Anole 64 Core PS/2 Port"}, + {HPHW_FIO, 0x01B, 0x00084, 0x0, "Anole 100 Core PS/2 Port"}, + {HPHW_FIO, 0x01C, 0x00084, 0x0, "Gecko 80 Core PS/2 Port"}, + {HPHW_FIO, 0x01D, 0x00084, 0x0, "Gecko 100 Core PS/2 Port"}, + {HPHW_FIO, 0x01F, 0x00084, 0x0, "SkyHawk 100/120 Core PS/2 Port"}, + {HPHW_FIO, 0x027, 0x00084, 0x0, "Piranha 100 Core PS/2 Port"}, + {HPHW_FIO, 0x028, 0x00084, 0x0, "Mirage Jr Core PS/2 Port"}, + {HPHW_FIO, 0x029, 0x00084, 0x0, "Mirage Core PS/2 Port"}, + {HPHW_FIO, 0x02A, 0x00084, 0x0, "Electra Core PS/2 Port"}, + {HPHW_FIO, 0x02B, 0x00084, 0x0, "Mirage 80 Core PS/2 Port"}, + {HPHW_FIO, 0x02C, 0x00084, 0x0, "Mirage 100+ Core PS/2 Port"}, + {HPHW_FIO, 0x02E, 0x00084, 0x0, "UL 350 Core PS/2 Port"}, + {HPHW_FIO, 0x02F, 0x00084, 0x0, "UL 550 Core PS/2 Port"}, + {HPHW_FIO, 0x032, 0x00084, 0x0, "Raven T' Core PS/2 Port"}, + {HPHW_FIO, 0x033, 0x00084, 0x0, "Anole T Core PS/2 Port"}, + {HPHW_FIO, 0x034, 0x00084, 0x0, "SAIC L-80 Core PS/2 Port"}, + {HPHW_FIO, 0x035, 0x00084, 0x0, "PCX-L2 712/132 Core PS/2 Port"}, + {HPHW_FIO, 0x036, 0x00084, 0x0, "PCX-L2 712/160 Core PS/2 Port"}, + {HPHW_FIO, 0x03B, 0x00084, 0x0, "Raven U/L2 Core PS/2 Port"}, + {HPHW_FIO, 0x03C, 0x00084, 0x0, "Merlin 132 Core PS/2 Port"}, + {HPHW_FIO, 0x03D, 0x00084, 0x0, "Merlin 160 Core PS/2 Port"}, + {HPHW_FIO, 0x03E, 0x00084, 0x0, "Merlin+ 132 Core PS/2 Port"}, + {HPHW_FIO, 0x03F, 0x00084, 0x0, "Merlin+ 180 Core PS/2 Port"}, + {HPHW_FIO, 0x044, 0x00084, 0x0, "Mohawk Core PS/2 Port"}, + {HPHW_FIO, 0x045, 0x00084, 0x0, "Rocky1 Core PS/2 Port"}, + {HPHW_FIO, 0x046, 0x00084, 0x0, "Rocky2 120 Core PS/2 Port"}, + {HPHW_FIO, 0x047, 0x00084, 0x0, "Rocky2 150 Core PS/2 Port"}, + {HPHW_FIO, 0x048, 0x00084, 0x0, "Rocky2 120 Dino PS/2 Port"}, + {HPHW_FIO, 0x049, 0x00084, 0x0, "Rocky2 150 Dino PS/2 Port"}, + {HPHW_FIO, 0x04B, 0x00084, 0x0, "Anole L2 132 Core PS/2 Port"}, + {HPHW_FIO, 0x04D, 0x00084, 0x0, "Anole L2 165 Core PS/2 Port"}, + {HPHW_FIO, 0x04E, 0x00084, 0x0, "Kiji L2 132 Core PS/2 Port"}, + {HPHW_FIO, 0x050, 0x00084, 0x0, "Merlin Jr 132 Core PS/2 Port"}, + {HPHW_FIO, 0x051, 0x00084, 0x0, "Firehawk Core PS/2 Port"}, + {HPHW_FIO, 0x056, 0x00084, 0x0, "Raven+ w SE FWSCSI Core PS/2 Port"}, + {HPHW_FIO, 0x057, 0x00084, 0x0, "Raven+ w Diff FWSCSI Core PS/2 Port"}, + {HPHW_FIO, 0x058, 0x00084, 0x0, "FireHawk 200 Core PS/2 Port"}, + {HPHW_FIO, 0x05C, 0x00084, 0x0, "SummitHawk 230 Core PS/2 Port"}, + {HPHW_FIO, 0x800, 0x00084, 0x0, "Hitachi Tiny 64 Core PS/2 Port"}, + {HPHW_FIO, 0x801, 0x00084, 0x0, "Hitachi Tiny 80 Core PS/2 Port"}, + {HPHW_FIO, 0x004, 0x00085, 0x0, "Solo GSC Optional Graphics"}, + {HPHW_FIO, 0x005, 0x00085, 0x0, "Duet GSC Optional Graphics"}, + {HPHW_FIO, 0x008, 0x00085, 0x0, "Anole Artist Optional Graphics"}, + {HPHW_FIO, 0x010, 0x00085, 0x0, "Mirage 80 GSC Builtin Graphics"}, + {HPHW_FIO, 0x011, 0x00085, 0x0, "Mirage 100+ GSC Builtin Graphics"}, + {HPHW_FIO, 0x012, 0x00085, 0x0, "Mirage Jr GSC Builtin Graphics"}, + {HPHW_FIO, 0x013, 0x00085, 0x0, "Mirage GSC Builtin Graphics"}, + {HPHW_FIO, 0x014, 0x00085, 0x0, "Electra GSC Builtin Graphics"}, + {HPHW_FIO, 0x016, 0x00085, 0x0, "Gecko GSC Core Graphics"}, + {HPHW_FIO, 0x017, 0x00085, 0x0, "Gecko GSC Optional Graphics"}, + {HPHW_FIO, 0x01A, 0x00085, 0x0, "Anole 64 Artist Builtin Graphics"}, + {HPHW_FIO, 0x01B, 0x00085, 0x0, "Anole 100 Artist Builtin Graphics"}, + {HPHW_FIO, 0x01C, 0x00085, 0x0, "Gecko 80 GSC Core Graphics"}, + {HPHW_FIO, 0x01D, 0x00085, 0x0, "Gecko 100 GSC Core Graphics"}, + {HPHW_FIO, 0x032, 0x00085, 0x0, "Raven T' GSC Core Graphics"}, + {HPHW_FIO, 0x033, 0x00085, 0x0, "Anole T Artist Builtin Graphics"}, + {HPHW_FIO, 0x034, 0x00085, 0x0, "SAIC L-80 GSC Core Graphics"}, + {HPHW_FIO, 0x035, 0x00085, 0x0, "PCX-L2 712/132 Core Graphics"}, + {HPHW_FIO, 0x036, 0x00085, 0x0, "PCX-L2 712/160 Core Graphics"}, + {HPHW_FIO, 0x03B, 0x00085, 0x0, "Raven U/L2 Core Graphics"}, + {HPHW_FIO, 0x03C, 0x00085, 0x0, "Merlin 132 Core Graphics"}, + {HPHW_FIO, 0x03D, 0x00085, 0x0, "Merlin 160 Core Graphics"}, + {HPHW_FIO, 0x03E, 0x00085, 0x0, "Merlin+ 132 Core Graphics"}, + {HPHW_FIO, 0x03F, 0x00085, 0x0, "Merlin+ 180 Core Graphics"}, + {HPHW_FIO, 0x045, 0x00085, 0x0, "Rocky1 Core Graphics"}, + {HPHW_FIO, 0x046, 0x00085, 0x0, "Rocky2 120 Core Graphics"}, + {HPHW_FIO, 0x047, 0x00085, 0x0, "Rocky2 150 Core Graphics"}, + {HPHW_FIO, 0x04B, 0x00085, 0x0, "Anole L2 132 Core Graphics"}, + {HPHW_FIO, 0x04D, 0x00085, 0x0, "Anole L2 165 Core Graphics"}, + {HPHW_FIO, 0x04E, 0x00085, 0x0, "Kiji L2 132 Core Graphics"}, + {HPHW_FIO, 0x050, 0x00085, 0x0, "Merlin Jr 132 Core Graphics"}, + {HPHW_FIO, 0x056, 0x00085, 0x0, "Raven+ w SE FWSCSI Core Graphics"}, + {HPHW_FIO, 0x057, 0x00085, 0x0, "Raven+ w Diff FWSCSI Core Graphics"}, + {HPHW_FIO, 0x800, 0x00085, 0x0, "Hitachi Tiny 64 Core Graphics"}, + {HPHW_FIO, 0x801, 0x00085, 0x0, "Hitachi Tiny 80 Core Graphics"}, + {HPHW_FIO, 0x004, 0x00086, 0x0, "GSC IBM Token Ring"}, + {HPHW_FIO, 0x015, 0x00087, 0x0, "Gecko Optional ISDN"}, + {HPHW_FIO, 0x016, 0x00087, 0x0, "Gecko Core ISDN"}, + {HPHW_FIO, 0x01C, 0x00087, 0x0, "Gecko 80 Core ISDN"}, + {HPHW_FIO, 0x01D, 0x00087, 0x0, "Gecko 100 Core ISDN"}, + {HPHW_FIO, 0x010, 0x00088, 0x0, "Pace VME Networking"}, + {HPHW_FIO, 0x011, 0x00088, 0x0, "Sidewinder VME Networking"}, + {HPHW_FIO, 0x01A, 0x00088, 0x0, "Anole 64 VME Networking"}, + {HPHW_FIO, 0x01B, 0x00088, 0x0, "Anole 100 VME Networking"}, + {HPHW_FIO, 0x024, 0x00088, 0x0, "Fast Pace VME Networking"}, + {HPHW_FIO, 0x034, 0x00088, 0x0, "Anole T VME Networking"}, + {HPHW_FIO, 0x04A, 0x00088, 0x0, "Anole L2 132 VME Networking"}, + {HPHW_FIO, 0x04C, 0x00088, 0x0, "Anole L2 165 VME Networking"}, + {HPHW_FIO, 0x011, 0x0008A, 0x0, "WB-96 Core LAN (802.3)"}, + {HPHW_FIO, 0x012, 0x0008A, 0x0, "Orville Core LAN (802.3)"}, + {HPHW_FIO, 0x013, 0x0008A, 0x0, "Wilbur Core LAN (802.3)"}, + {HPHW_FIO, 0x014, 0x0008A, 0x0, "WB-80 Core LAN (802.3)"}, + {HPHW_FIO, 0x015, 0x0008A, 0x0, "KittyHawk GSY Core LAN (802.3)"}, + {HPHW_FIO, 0x016, 0x0008A, 0x0, "Gecko Core LAN (802.3)"}, + {HPHW_FIO, 0x018, 0x0008A, 0x0, "Gecko Optional LAN (802.3)"}, + {HPHW_FIO, 0x01A, 0x0008A, 0x0, "Anole 64 Core LAN (802.3)"}, + {HPHW_FIO, 0x01B, 0x0008A, 0x0, "Anole 100 Core LAN (802.3)"}, + {HPHW_FIO, 0x01C, 0x0008A, 0x0, "Gecko 80 Core LAN (802.3)"}, + {HPHW_FIO, 0x01D, 0x0008A, 0x0, "Gecko 100 Core LAN (802.3)"}, + {HPHW_FIO, 0x01F, 0x0008A, 0x0, "SkyHawk 100/120 Core LAN (802.3)"}, + {HPHW_FIO, 0x027, 0x0008A, 0x0, "Piranha 100 Core LAN (802.3)"}, + {HPHW_FIO, 0x028, 0x0008A, 0x0, "Mirage Jr Core LAN (802.3)"}, + {HPHW_FIO, 0x029, 0x0008A, 0x0, "Mirage Core LAN (802.3)"}, + {HPHW_FIO, 0x02A, 0x0008A, 0x0, "Electra Core LAN (802.3)"}, + {HPHW_FIO, 0x02B, 0x0008A, 0x0, "Mirage 80 Core LAN (802.3)"}, + {HPHW_FIO, 0x02C, 0x0008A, 0x0, "Mirage 100+ Core LAN (802.3)"}, + {HPHW_FIO, 0x02E, 0x0008A, 0x0, "UL 350 Core LAN (802.3)"}, + {HPHW_FIO, 0x02F, 0x0008A, 0x0, "UL 350 Core LAN (802.3)"}, + {HPHW_FIO, 0x032, 0x0008A, 0x0, "Raven T' Core LAN (802.3)"}, + {HPHW_FIO, 0x033, 0x0008A, 0x0, "Anole T Core LAN (802.3)"}, + {HPHW_FIO, 0x034, 0x0008A, 0x0, "SAIC L-80 Core LAN (802.3)"}, + {HPHW_FIO, 0x035, 0x0008A, 0x0, "PCX-L2 712/132 Core LAN (802.3)"}, + {HPHW_FIO, 0x036, 0x0008A, 0x0, "PCX-L2 712/160 Core LAN (802.3)"}, + {HPHW_FIO, 0x03B, 0x0008A, 0x0, "Raven U/L2 Core LAN (802.3)"}, + {HPHW_FIO, 0x03C, 0x0008A, 0x0, "Merlin 132 Core LAN (802.3)"}, + {HPHW_FIO, 0x03D, 0x0008A, 0x0, "Merlin 160 Core LAN (802.3)"}, + {HPHW_FIO, 0x044, 0x0008A, 0x0, "Mohawk Core LAN (802.3)"}, + {HPHW_FIO, 0x045, 0x0008A, 0x0, "Rocky1 Core LAN (802.3)"}, + {HPHW_FIO, 0x046, 0x0008A, 0x0, "Rocky2 120 Core LAN (802.3)"}, + {HPHW_FIO, 0x047, 0x0008A, 0x0, "Rocky2 150 Core LAN (802.3)"}, + {HPHW_FIO, 0x04B, 0x0008A, 0x0, "Anole L2 132 Core LAN (802.3)"}, + {HPHW_FIO, 0x04D, 0x0008A, 0x0, "Anole L2 165 Core LAN (802.3)"}, + {HPHW_FIO, 0x04E, 0x0008A, 0x0, "Kiji L2 132 Core LAN (802.3)"}, + {HPHW_FIO, 0x050, 0x0008A, 0x0, "Merlin Jr 132 Core LAN (802.3)"}, + {HPHW_FIO, 0x058, 0x0008A, 0x0, "FireHawk 200 Core LAN (802.3)"}, + {HPHW_FIO, 0x800, 0x0008A, 0x0, "Hitachi Tiny 64 Core LAN (802.3)"}, + {HPHW_FIO, 0x801, 0x0008A, 0x0, "Hitachi Tiny 80 Core LAN (802.3)"}, + {HPHW_FIO, 0x004, 0x0008C, 0x0, "SkyHawk 100/120 Wax RS-232"}, + {HPHW_FIO, 0x005, 0x0008C, 0x0, "SAIC L-80 Wax RS-232"}, + {HPHW_FIO, 0x006, 0x0008C, 0x0, "Raven U/L2 Dino RS-232"}, + {HPHW_FIO, 0x007, 0x0008C, 0x0, "Dino RS-232"}, + {HPHW_FIO, 0x008, 0x0008C, 0x0, "Merlin 132 Dino RS-232"}, + {HPHW_FIO, 0x009, 0x0008C, 0x0, "Merlin 160 Dino RS-232"}, + {HPHW_FIO, 0x00A, 0x0008C, 0x0, "Merlin Jr 132 Dino RS-232"}, + {HPHW_FIO, 0x010, 0x0008C, 0x0, "Mirage 80 Wax RS-232"}, + {HPHW_FIO, 0x011, 0x0008C, 0x0, "Mirage 100+ Wax RS-232"}, + {HPHW_FIO, 0x012, 0x0008C, 0x0, "Mirage Jr Wax RS-232"}, + {HPHW_FIO, 0x013, 0x0008C, 0x0, "Mirage Wax RS-232"}, + {HPHW_FIO, 0x014, 0x0008C, 0x0, "Electra Wax RS-232"}, + {HPHW_FIO, 0x015, 0x0008C, 0x0, "KittyHawk GSY Core RS-232"}, + {HPHW_FIO, 0x016, 0x0008C, 0x0, "Gecko Core RS-232"}, + {HPHW_FIO, 0x017, 0x0008C, 0x0, "Raven Backplane RS-232"}, + {HPHW_FIO, 0x018, 0x0008C, 0x0, "Gecko Optional RS-232"}, + {HPHW_FIO, 0x019, 0x0008C, 0x0, "Merlin+ 180 Dino RS-232"}, + {HPHW_FIO, 0x01A, 0x0008C, 0x0, "Anole 64 Core RS-232"}, + {HPHW_FIO, 0x01B, 0x0008C, 0x0, "Anole 100 Core RS-232"}, + {HPHW_FIO, 0x01C, 0x0008C, 0x0, "Gecko 80 Core RS-232"}, + {HPHW_FIO, 0x01D, 0x0008C, 0x0, "Gecko 100 Core RS-232"}, + {HPHW_FIO, 0x01E, 0x0008C, 0x0, "Raven T' Wax RS-232"}, + {HPHW_FIO, 0x01F, 0x0008C, 0x0, "SkyHawk 100/120 Core RS-232"}, + {HPHW_FIO, 0x020, 0x0008C, 0x0, "Anole 64 Timi RS-232"}, + {HPHW_FIO, 0x021, 0x0008C, 0x0, "Anole 100 Timi RS-232"}, + {HPHW_FIO, 0x022, 0x0008C, 0x0, "Merlin+ 132 Dino RS-232"}, + {HPHW_FIO, 0x023, 0x0008C, 0x0, "Rocky1 Wax RS-232"}, + {HPHW_FIO, 0x025, 0x0008C, 0x0, "Armyknife Optional RS-232"}, + {HPHW_FIO, 0x026, 0x0008C, 0x0, "Piranha 100 Wax RS-232"}, + {HPHW_FIO, 0x027, 0x0008C, 0x0, "Piranha 100 Core RS-232"}, + {HPHW_FIO, 0x028, 0x0008C, 0x0, "Mirage Jr Core RS-232"}, + {HPHW_FIO, 0x029, 0x0008C, 0x0, "Mirage Core RS-232"}, + {HPHW_FIO, 0x02A, 0x0008C, 0x0, "Electra Core RS-232"}, + {HPHW_FIO, 0x02B, 0x0008C, 0x0, "Mirage 80 Core RS-232"}, + {HPHW_FIO, 0x02C, 0x0008C, 0x0, "Mirage 100+ Core RS-232"}, + {HPHW_FIO, 0x02E, 0x0008C, 0x0, "UL 350 Lasi Core RS-232"}, + {HPHW_FIO, 0x02F, 0x0008C, 0x0, "UL 550 Lasi Core RS-232"}, + {HPHW_FIO, 0x030, 0x0008C, 0x0, "UL 350 Wax Core RS-232"}, + {HPHW_FIO, 0x031, 0x0008C, 0x0, "UL 550 Wax Core RS-232"}, + {HPHW_FIO, 0x032, 0x0008C, 0x0, "Raven T' Lasi Core RS-232"}, + {HPHW_FIO, 0x033, 0x0008C, 0x0, "Anole T Core RS-232"}, + {HPHW_FIO, 0x034, 0x0008C, 0x0, "SAIC L-80 Core RS-232"}, + {HPHW_FIO, 0x035, 0x0008C, 0x0, "PCX-L2 712/132 Core RS-232"}, + {HPHW_FIO, 0x036, 0x0008C, 0x0, "PCX-L2 712/160 Core RS-232"}, + {HPHW_FIO, 0x03A, 0x0008C, 0x0, "Merlin+ Wax RS-232"}, + {HPHW_FIO, 0x03B, 0x0008C, 0x0, "Raven U/L2 Core RS-232"}, + {HPHW_FIO, 0x03C, 0x0008C, 0x0, "Merlin 132 Core RS-232"}, + {HPHW_FIO, 0x03D, 0x0008C, 0x0, "Merlin 160 Core RS-232"}, + {HPHW_FIO, 0x03E, 0x0008C, 0x0, "Merlin+ 132 Core RS-232"}, + {HPHW_FIO, 0x03F, 0x0008C, 0x0, "Merlin+ 180 Core RS-232"}, + {HPHW_FIO, 0x040, 0x0008C, 0x0, "Merlin 132 Wax RS-232"}, + {HPHW_FIO, 0x041, 0x0008C, 0x0, "Merlin 160 Wax RS-232"}, + {HPHW_FIO, 0x043, 0x0008C, 0x0, "Merlin 132/160 Wax RS-232"}, + {HPHW_FIO, 0x044, 0x0008C, 0x0, "Mohawk Core RS-232"}, + {HPHW_FIO, 0x045, 0x0008C, 0x0, "Rocky1 Core RS-232"}, + {HPHW_FIO, 0x046, 0x0008C, 0x0, "Rocky2 120 Core RS-232"}, + {HPHW_FIO, 0x047, 0x0008C, 0x0, "Rocky2 150 Core RS-232"}, + {HPHW_FIO, 0x048, 0x0008C, 0x0, "Rocky2 120 Dino RS-232"}, + {HPHW_FIO, 0x049, 0x0008C, 0x0, "Rocky2 150 Dino RS-232"}, + {HPHW_FIO, 0x04A, 0x0008C, 0x0, "Anole L2 132 TIMI RS-232"}, + {HPHW_FIO, 0x04B, 0x0008C, 0x0, "Anole L2 l32 Core RS-232"}, + {HPHW_FIO, 0x04C, 0x0008D, 0x0, "Anole L2 165 TIMI RS-232"}, + {HPHW_FIO, 0x04D, 0x0008C, 0x0, "Anole L2 165 Core RS-232"}, + {HPHW_FIO, 0x04E, 0x0008C, 0x0, "Kiji L2 132 Core RS-232"}, + {HPHW_FIO, 0x04F, 0x0008C, 0x0, "Kiji L2 132 Dino RS-232"}, + {HPHW_FIO, 0x050, 0x0008C, 0x0, "Merlin Jr 132 Core RS-232"}, + {HPHW_FIO, 0x051, 0x0008C, 0x0, "Firehawk Core RS-232"}, + {HPHW_FIO, 0x052, 0x0008C, 0x0, "Raven+ Hi Power Backplane w EISA RS-232"}, + {HPHW_FIO, 0x053, 0x0008C, 0x0, "Raven+ Hi Power Backplane w/o EISA RS-232"}, + {HPHW_FIO, 0x054, 0x0008C, 0x0, "Raven+ Lo Power Backplane w EISA RS-232"}, + {HPHW_FIO, 0x055, 0x0008C, 0x0, "Raven+ Lo Power Backplane w/o EISA RS-232"}, + {HPHW_FIO, 0x056, 0x0008C, 0x0, "Raven+ w SE FWSCSI Core RS-232"}, + {HPHW_FIO, 0x057, 0x0008C, 0x0, "Raven+ w Diff FWSCSI Core RS-232"}, + {HPHW_FIO, 0x058, 0x0008C, 0x0, "FireHawk 200 Core RS-232"}, + {HPHW_FIO, 0x059, 0x0008C, 0x0, "FireHawk 200 Wax RS-232"}, + {HPHW_FIO, 0x05A, 0x0008C, 0x0, "Raven+ L2 Backplane w EISA RS-232"}, + {HPHW_FIO, 0x05B, 0x0008C, 0x0, "Raven+ L2 Backplane w/o EISA RS-232"}, + {HPHW_FIO, 0x05D, 0x0008C, 0x0, "SummitHawk Dino RS-232"}, + {HPHW_FIO, 0x05E, 0x0008C, 0x0, "Staccato 132 Core LAN RS-232"}, + {HPHW_FIO, 0x05F, 0x0008C, 0x0, "Staccato 180 Core LAN RS-232"}, + {HPHW_FIO, 0x800, 0x0008C, 0x0, "Hitachi Tiny 64 Core RS-232"}, + {HPHW_FIO, 0x801, 0x0008C, 0x0, "Hitachi Tiny 80 Core RS-232"}, + {HPHW_FIO, 0x015, 0x0008D, 0x0, "Gecko Optional RJ-16"}, + {HPHW_FIO, 0x016, 0x0008D, 0x0, "Gecko Core RJ-16"}, + {HPHW_FIO, 0x01C, 0x0008D, 0x0, "Gecko 80 Core RJ-16"}, + {HPHW_FIO, 0x01D, 0x0008D, 0x0, "Gecko 100 Core RJ-16"}, + {HPHW_FIO, 0x004, 0x0008F, 0x0, "Anole Boot Rom"}, + {HPHW_FIO, 0x005, 0x0008F, 0x0, "Rocky1 Boot Rom"}, + {HPHW_FIO, 0x006, 0x0008F, 0x0, "Rocky2 120 Boot Rom"}, + {HPHW_FIO, 0x007, 0x0008F, 0x0, "Rocky2 150 Boot Rom"}, + {HPHW_FIO, 0x01B, 0x0008F, 0x0, "Anole 100 Boot Rom"}, + {HPHW_FIO, 0x006, 0x00096, 0x0, "Raven U/L2 Dino PS/2 Port"}, + {HPHW_FIO, 0x007, 0x00096, 0x0, "Dino PS/2 Port"}, + {HPHW_FIO, 0x008, 0x00096, 0x0, "Merlin 132 Dino PS/2 Port"}, + {HPHW_FIO, 0x009, 0x00096, 0x0, "Merlin 160 Dino PS/2 Port"}, + {HPHW_FIO, 0x00A, 0x00096, 0x0, "Merlin Jr 132 Dino PS/2 Port"}, + {HPHW_FIO, 0x019, 0x00096, 0x0, "Merlin+ 180 Dino PS/2 Port"}, + {HPHW_FIO, 0x022, 0x00096, 0x0, "Merlin+ 132 Dino PS/2 Port"}, + {HPHW_FIO, 0x004, 0x00097, 0x0, "Cascade EISA 100VG LAN"}, + {HPHW_FIO, 0x023, 0x00099, 0x0, "Rocky1 Wax HPIB"}, + {HPHW_FIO, 0x048, 0x00099, 0x0, "Rocky2 120 Clark/Dino HPIB"}, + {HPHW_FIO, 0x049, 0x00099, 0x0, "Rocky2 150 Clark/Dino HPIB"}, + {HPHW_FIO, 0x004, 0x000A1, 0x0, "SPP2000 Console TTY"}, + {HPHW_FIO, 0x004, 0x000A2, 0x0, "Forte Core PCI 10/100BT LAN"}, + {HPHW_FIO, 0x005, 0x000A2, 0x0, "AllegroLow PCI 10/100BT LAN"}, + {HPHW_FIO, 0x006, 0x000A2, 0x0, "AllegroHIgh Core PCI 10/100BT LAN"}, + {HPHW_FIO, 0x007, 0x000A2, 0x0, "PCI Plug-in LAN"}, + {HPHW_FIO, 0x00A, 0x000A2, 0x0, "Lego 360 Core PCI 10/100BT LAN"}, + {HPHW_FIO, 0x03E, 0x000A2, 0x0, "Merlin+ 132 Core PCI LAN"}, + {HPHW_FIO, 0x03F, 0x000A2, 0x0, "Merlin+ 180 Core PCI LAN"}, + {HPHW_FIO, 0x056, 0x000A2, 0x0, "Raven+ w SE FWSCSI Core PCI LAN"}, + {HPHW_FIO, 0x057, 0x000A2, 0x0, "Raven+ w Diff FWSCSI Core PCI LAN"}, + {HPHW_FIO, 0x05E, 0x000A2, 0x0, "Staccato 132 PCI LAN"}, + {HPHW_FIO, 0x05F, 0x000A2, 0x0, "Staccato 180 PCI LAN"}, + {HPHW_FIO, 0x004, 0x000A3, 0x0, "Forte Core PCI LVD Ultra2 SCSI"}, + {HPHW_FIO, 0x004, 0x000A3, 0x0, "Forte Core PCI SE UltraSCSI"}, + {HPHW_FIO, 0x004, 0x000A3, 0x0, "Forte Core PCI IDE/ATAPI CD-ROM"}, + {HPHW_FIO, 0x005, 0x000A3, 0x0, "AllegroLow Core PCI LVD Ultra2 SCSI"}, + {HPHW_FIO, 0x005, 0x000A3, 0x0, "AllegroLow Core PCI IDE/ATAPI CD-ROM"}, + {HPHW_FIO, 0x006, 0x000A3, 0x0, "AllegroHigh Core PCI LVD Ultra2 SCSI"}, + {HPHW_FIO, 0x006, 0x000A3, 0x0, "AllegroHigh Core PCI IDE/ATAPI CD-ROM"}, + {HPHW_FIO, 0x007, 0x000A3, 0x0, "PCI Plug-in Disk"}, + {HPHW_FIO, 0x008, 0x000A3, 0x0, "A5158A S FC Tachlite HBA"}, + {HPHW_FIO, 0x009, 0x000A3, 0x0, "A5157A D FC HBA"}, + {HPHW_FIO, 0x00A, 0x000A3, 0x0, "Lego 360 Core PCI LVD Ultra2 SCSI"}, + {HPHW_FIO, 0x00A, 0x000A3, 0x0, "Lego 360 Core PCI NSE UltraSCSI"}, + {HPHW_FIO, 0x00A, 0x000A3, 0x0, "Lego 360 Core PCI WSE UltraSCSI"}, + {HPHW_FIO, 0x00A, 0x000A3, 0x0, "Lego 360 Core PCI IDE/ATAPI CD-ROM"}, + {HPHW_FIO, 0x03E, 0x000A3, 0x0, "Merlin+ 132 Core SE FWSCSI PCI Disk"}, + {HPHW_FIO, 0x03F, 0x000A3, 0x0, "Merlin+ 180 Core SE FWSCSI PCI Disk"}, + {HPHW_FIO, 0x056, 0x000A3, 0x0, "Raven+ w SE FWSCSI Core PCI Disk"}, + {HPHW_FIO, 0x057, 0x000A3, 0x0, "Raven+ w Diff FWSCSI Core PCI Disk"}, + {HPHW_FIO, 0x004, 0x000A4, 0x0, "SPP2000 Core BA"}, + {HPHW_FIO, 0x004, 0x000A6, 0x0, "Sonic Ethernet 802.3 Card"}, + {HPHW_FIO, 0x004, 0x000A9, 0x00, "Forte Core PCI SuperIO RS-232"}, + {HPHW_FIO, 0x004, 0x000A9, 0x00, "Forte Core PCI USB KB"}, + {HPHW_FIO, 0x005, 0x000A9, 0x00, "AllegroLow Core PCI SuperIO RS-232"}, + {HPHW_FIO, 0x005, 0x000A9, 0x00, "AllegroLow Core PCI USB KB"}, + {HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI SuperIO RS-232"}, + {HPHW_FIO, 0x006, 0x000A9, 0x00, "AllegroHigh Core PCI USB KB"}, + {HPHW_FIO, 0x007, 0x000A9, 0x0, "Miscelaneous PCI Plug-in"}, + {HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI SuperIO RS-232"}, + {HPHW_FIO, 0x00A, 0x000A9, 0x0, "Lego 360 Core PCI USB KB"}, + {HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, + {HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, + {HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, + {HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, + {HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, + {HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, + {HPHW_IOA, 0x581, 0x0000B, 0x10, "Uturn-IOA BC Runway Port"}, + {HPHW_IOA, 0x582, 0x0000B, 0x10, "Astro BC Runway Port"}, + {HPHW_IOA, 0x700, 0x0000B, 0x00, "NEC-IOS BC System Bus Port"}, + {HPHW_IOA, 0x880, 0x0000C, 0x10, "Pluto BC McKinley Port"}, + {HPHW_MEMORY, 0x002, 0x00008, 0x00, "MID_BUS"}, + {HPHW_MEMORY, 0x063, 0x00009, 0x00, "712/132 L2 Upgrade"}, + {HPHW_MEMORY, 0x064, 0x00009, 0x00, "712/160 L2 Upgrade"}, + {HPHW_MEMORY, 0x065, 0x00009, 0x00, "715/132 L2 Upgrade"}, + {HPHW_MEMORY, 0x066, 0x00009, 0x00, "715/160 L2 Upgrade"}, + {HPHW_MEMORY, 0x0AF, 0x00009, 0x00, "Everest Mako Memory"}, + {HPHW_OTHER, 0x004, 0x00030, 0x00, "Master"}, + {HPHW_OTHER, 0x004, 0x00034, 0x00, "Slave"}, + {HPHW_OTHER, 0x004, 0x00038, 0x00, "EDU"}, + {HPHW_OTHER, 0x004, 0x00049, 0x00, "LGB Control"}, + {HPHW_MC, 0x004, 0x000C0, 0x00, "BMC IPMI Mgmt Ctlr"}, + {HPHW_FAULTY, 0, } /* Special Marker for last entry */ +}; + + +static struct hp_cpu_type_mask { + unsigned short model; + unsigned short mask; + enum cpu_type cpu; +} hp_cpu_type_mask_list[] __initdata = { + + { 0x0000, 0x0ff0, pcx }, /* 0x0000 - 0x000f */ + { 0x0048, 0x0ff0, pcxl }, /* 0x0040 - 0x004f */ + { 0x0080, 0x0ff0, pcx }, /* 0x0080 - 0x008f */ + { 0x0100, 0x0ff0, pcx }, /* 0x0100 - 0x010f */ + { 0x0182, 0x0ffe, pcx }, /* 0x0182 - 0x0183 */ + { 0x0182, 0x0ffe, pcxt }, /* 0x0182 - 0x0183 */ + { 0x0184, 0x0fff, pcxu }, /* 0x0184 - 0x0184 */ + { 0x0200, 0x0ffe, pcxs }, /* 0x0200 - 0x0201 */ + { 0x0202, 0x0fff, pcxs }, /* 0x0202 - 0x0202 */ + { 0x0203, 0x0fff, pcxt }, /* 0x0203 - 0x0203 */ + { 0x0204, 0x0ffc, pcxt }, /* 0x0204 - 0x0207 */ + { 0x0280, 0x0ffc, pcxs }, /* 0x0280 - 0x0283 */ + { 0x0284, 0x0ffc, pcxt }, /* 0x0284 - 0x0287 */ + { 0x0288, 0x0fff, pcxt }, /* 0x0288 - 0x0288 */ + { 0x0300, 0x0ffc, pcxs }, /* 0x0300 - 0x0303 */ + { 0x0310, 0x0ff0, pcxt }, /* 0x0310 - 0x031f */ + { 0x0320, 0x0ff0, pcxt }, /* 0x0320 - 0x032f */ + { 0x0400, 0x0ff0, pcxt }, /* 0x0400 - 0x040f */ + { 0x0480, 0x0ff0, pcxl }, /* 0x0480 - 0x048f */ + { 0x0500, 0x0ff0, pcxl2 }, /* 0x0500 - 0x050f */ + { 0x0510, 0x0ff0, pcxl2 }, /* 0x0510 - 0x051f */ + { 0x0580, 0x0ff8, pcxt_ }, /* 0x0580 - 0x0587 */ + { 0x0588, 0x0ffc, pcxt_ }, /* 0x0588 - 0x058b */ + { 0x058c, 0x0ffe, pcxt_ }, /* 0x058c - 0x058d */ + { 0x058e, 0x0fff, pcxt_ }, /* 0x058e - 0x058e */ + { 0x058f, 0x0fff, pcxu }, /* 0x058f - 0x058f */ + { 0x0590, 0x0ffe, pcxu }, /* 0x0590 - 0x0591 */ + { 0x0592, 0x0fff, pcxt_ }, /* 0x0592 - 0x0592 */ + { 0x0593, 0x0fff, pcxu }, /* 0x0593 - 0x0593 */ + { 0x0594, 0x0ffc, pcxu }, /* 0x0594 - 0x0597 */ + { 0x0598, 0x0ffe, pcxu_ }, /* 0x0598 - 0x0599 */ + { 0x059a, 0x0ffe, pcxu }, /* 0x059a - 0x059b */ + { 0x059c, 0x0fff, pcxu }, /* 0x059c - 0x059c */ + { 0x059d, 0x0fff, pcxu_ }, /* 0x059d - 0x059d */ + { 0x059e, 0x0fff, pcxt_ }, /* 0x059e - 0x059e */ + { 0x059f, 0x0fff, pcxu }, /* 0x059f - 0x059f */ + { 0x05a0, 0x0ffe, pcxt_ }, /* 0x05a0 - 0x05a1 */ + { 0x05a2, 0x0ffe, pcxu }, /* 0x05a2 - 0x05a3 */ + { 0x05a4, 0x0ffc, pcxu }, /* 0x05a4 - 0x05a7 */ + { 0x05a8, 0x0ffc, pcxu }, /* 0x05a8 - 0x05ab */ + { 0x05ad, 0x0fff, pcxu_ }, /* 0x05ad - 0x05ad */ + { 0x05ae, 0x0ffe, pcxu_ }, /* 0x05ae - 0x05af */ + { 0x05b0, 0x0ffe, pcxu_ }, /* 0x05b0 - 0x05b1 */ + { 0x05b2, 0x0fff, pcxu_ }, /* 0x05b2 - 0x05b2 */ + { 0x05b3, 0x0fff, pcxu }, /* 0x05b3 - 0x05b3 */ + { 0x05b4, 0x0fff, pcxw }, /* 0x05b4 - 0x05b4 */ + { 0x05b5, 0x0fff, pcxu_ }, /* 0x05b5 - 0x05b5 */ + { 0x05b6, 0x0ffe, pcxu_ }, /* 0x05b6 - 0x05b7 */ + { 0x05b8, 0x0ffe, pcxu_ }, /* 0x05b8 - 0x05b9 */ + { 0x05ba, 0x0fff, pcxu_ }, /* 0x05ba - 0x05ba */ + { 0x05bb, 0x0fff, pcxw }, /* 0x05bb - 0x05bb */ + { 0x05bc, 0x0ffc, pcxw }, /* 0x05bc - 0x05bf */ + { 0x05c0, 0x0ffc, pcxw }, /* 0x05c0 - 0x05c3 */ + { 0x05c4, 0x0ffe, pcxw }, /* 0x05c4 - 0x05c5 */ + { 0x05c6, 0x0fff, pcxw }, /* 0x05c6 - 0x05c6 */ + { 0x05c7, 0x0fff, pcxw_ }, /* 0x05c7 - 0x05c7 */ + { 0x05c8, 0x0ffc, pcxw }, /* 0x05c8 - 0x05cb */ + { 0x05cc, 0x0ffe, pcxw }, /* 0x05cc - 0x05cd */ + { 0x05ce, 0x0ffe, pcxw_ }, /* 0x05ce - 0x05cf */ + { 0x05d0, 0x0ffc, pcxw_ }, /* 0x05d0 - 0x05d3 */ + { 0x05d4, 0x0ffe, pcxw_ }, /* 0x05d4 - 0x05d5 */ + { 0x05d6, 0x0fff, pcxw }, /* 0x05d6 - 0x05d6 */ + { 0x05d7, 0x0fff, pcxw_ }, /* 0x05d7 - 0x05d7 */ + { 0x05d8, 0x0ffc, pcxw_ }, /* 0x05d8 - 0x05db */ + { 0x05dc, 0x0ffe, pcxw2 }, /* 0x05dc - 0x05dd */ + { 0x05de, 0x0fff, pcxw_ }, /* 0x05de - 0x05de */ + { 0x05df, 0x0fff, pcxw2 }, /* 0x05df - 0x05df */ + { 0x05e0, 0x0ffc, pcxw2 }, /* 0x05e0 - 0x05e3 */ + { 0x05e4, 0x0fff, pcxw2 }, /* 0x05e4 - 0x05e4 */ + { 0x05e5, 0x0fff, pcxw_ }, /* 0x05e5 - 0x05e5 */ + { 0x05e6, 0x0ffe, pcxw2 }, /* 0x05e6 - 0x05e7 */ + { 0x05e8, 0x0ff8, pcxw2 }, /* 0x05e8 - 0x05ef */ + { 0x05f0, 0x0ff0, pcxw2 }, /* 0x05f0 - 0x05ff */ + { 0x0600, 0x0fe0, pcxl }, /* 0x0600 - 0x061f */ + { 0x0880, 0x0ff0, mako }, /* 0x0880 - 0x088f */ + { 0x0000, 0x0000, pcx } /* terminate table */ +}; + +char *cpu_name_version[][2] = { + [pcx] = { "PA7000 (PCX)", "1.0" }, + [pcxs] = { "PA7000 (PCX-S)", "1.1a" }, + [pcxt] = { "PA7100 (PCX-T)", "1.1b" }, + [pcxt_] = { "PA7200 (PCX-T')", "1.1c" }, + [pcxl] = { "PA7100LC (PCX-L)", "1.1d" }, + [pcxl2] = { "PA7300LC (PCX-L2)", "1.1e" }, + [pcxu] = { "PA8000 (PCX-U)", "2.0" }, + [pcxu_] = { "PA8200 (PCX-U+)", "2.0" }, + [pcxw] = { "PA8500 (PCX-W)", "2.0" }, + [pcxw_] = { "PA8600 (PCX-W+)", "2.0" }, + [pcxw2] = { "PA8700 (PCX-W2)", "2.0" }, + [mako] = { "PA8800 (Mako)", "2.0" } +}; + +const char * __init +parisc_hardware_description(struct parisc_device_id *id) +{ + struct hp_hardware *listptr; + + for (listptr = hp_hardware_list; listptr->hw_type != HPHW_FAULTY; listptr++) { + if ((listptr->hw_type == id->hw_type) && + (listptr->hversion == id->hversion) && + (listptr->sversion == id->sversion)){ + return listptr->name; + } + } + + /* + * ok, the above hardware table isn't complete, and we haven't found + * our device in this table. So let's now try to find a generic name + * to describe the given hardware... + */ + switch (id->hw_type) { + case HPHW_NPROC: + return "Unknown machine"; + + case HPHW_A_DIRECT: + switch (id->sversion) { + case 0x0D: return "MUX port"; + case 0x0E: return "RS-232 port"; + } + break; + + case HPHW_MEMORY: + return "Memory"; + + } + + return "unknown device"; +} + + +/* Interpret hversion (ret[0]) from PDC_MODEL(4)/PDC_MODEL_INFO(0) */ +enum cpu_type __init +parisc_get_cpu_type(unsigned long hversion) +{ + struct hp_cpu_type_mask *ptr; + unsigned short model = ((unsigned short) (hversion)) >> 4; + + for (ptr = hp_cpu_type_mask_list; 0 != ptr->mask; ptr++) { + if (ptr->model == (model & ptr->mask)) + return ptr->cpu; + } + panic("could not identify CPU type\n"); + + return pcx; /* not reached: */ +} + diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S new file mode 100644 index 000000000000..ddf7e914f15e --- /dev/null +++ b/arch/parisc/kernel/head.S @@ -0,0 +1,386 @@ +/* This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Helge Deller + * Copyright 1999 SuSE GmbH (Philipp Rumpf) + * Copyright 1999 Philipp Rumpf (prumpf@tux.org) + * Copyright 2000 Hewlett Packard (Paul Bame, bame@puffin.external.hp.com) + * Copyright (C) 2001 Grant Grundler (Hewlett Packard) + * Copyright (C) 2004 Kyle McMartin + * + * Initial Version 04-23-1999 by Helge Deller + */ + +#include /* for CONFIG_SMP */ + +#include +#include +#include + +#include +#include + + .level LEVEL + + .data + + .export boot_args +boot_args: + .word 0 /* arg0 */ + .word 0 /* arg1 */ + .word 0 /* arg2 */ + .word 0 /* arg3 */ + + .text + .align 4 + .import init_thread_union,data + .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ +#ifndef __LP64__ + .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ + .import $global$ /* forward declaration */ +#endif /*!LP64*/ + .export stext + .export _stext,data /* Kernel want it this way! */ +_stext: +stext: + .proc + .callinfo + + /* Make sure sr4-sr7 are set to zero for the kernel address space */ + mtsp %r0,%sr4 + mtsp %r0,%sr5 + mtsp %r0,%sr6 + mtsp %r0,%sr7 + + /* Clear BSS (shouldn't the boot loader do this?) */ + + .import __bss_start,data + .import __bss_stop,data + + load32 PA(__bss_start),%r3 + load32 PA(__bss_stop),%r4 +$bss_loop: + cmpb,<<,n %r3,%r4,$bss_loop + stw,ma %r0,4(%r3) + + /* Save away the arguments the boot loader passed in (32 bit args) */ + load32 PA(boot_args),%r1 + stw,ma %arg0,4(%r1) + stw,ma %arg1,4(%r1) + stw,ma %arg2,4(%r1) + stw,ma %arg3,4(%r1) + + /* Initialize startup VM. Just map first 8/16 MB of memory */ + load32 PA(swapper_pg_dir),%r4 + mtctl %r4,%cr24 /* Initialize kernel root pointer */ + mtctl %r4,%cr25 /* Initialize user root pointer */ + +#ifdef __LP64__ + /* Set pmd in pgd */ + load32 PA(pmd0),%r5 + shrd %r5,PxD_VALUE_SHIFT,%r3 + ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 + stw %r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4) + ldo ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4 +#else + /* 2-level page table, so pmd == pgd */ + ldo ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4 +#endif + + /* Fill in pmd with enough pte directories */ + load32 PA(pg0),%r1 + SHRREG %r1,PxD_VALUE_SHIFT,%r3 + ldo (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3 + + ldi ASM_PT_INITIAL,%r1 + +1: + stw %r3,0(%r4) + ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 + addib,> -1,%r1,1b +#ifdef __LP64__ + ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 +#else + ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 +#endif + + + /* Now initialize the PTEs themselves */ + ldo _PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ + load32 PA(pg0),%r1 + +$pgt_fill_loop: + STREGM %r3,ASM_PTE_ENTRY_SIZE(%r1) + ldo ASM_PAGE_SIZE(%r3),%r3 + bb,>= %r3,31-KERNEL_INITIAL_ORDER,$pgt_fill_loop + nop + + /* Load the return address...er...crash 'n burn */ + copy %r0,%r2 + + /* And the RFI Target address too */ + load32 start_kernel,%r11 + + /* And the initial task pointer */ + load32 init_thread_union,%r6 + mtctl %r6,%cr30 + + /* And the stack pointer too */ + ldo THREAD_SZ_ALGN(%r6),%sp + + /* And the interrupt stack */ + load32 interrupt_stack,%r6 + mtctl %r6,%cr31 + +#ifdef CONFIG_SMP + /* Set the smp rendevous address into page zero. + ** It would be safer to do this in init_smp_config() but + ** it's just way easier to deal with here because + ** of 64-bit function ptrs and the address is local to this file. + */ + load32 PA(smp_slave_stext),%r10 + stw %r10,0x10(%r0) /* MEM_RENDEZ */ + stw %r0,0x28(%r0) /* MEM_RENDEZ_HI - assume addr < 4GB */ + + /* FALLTHROUGH */ + .procend + + /* + ** Code Common to both Monarch and Slave processors. + ** Entry: + ** + ** 1.1: + ** %r11 must contain RFI target address. + ** %r25/%r26 args to pass to target function + ** %r2 in case rfi target decides it didn't like something + ** + ** 2.0w: + ** %r3 PDCE_PROC address + ** %r11 RFI target address + ** + ** Caller must init: SR4-7, %sp, %r10, %cr24/25, + */ +common_stext: + .proc + .callinfo +#else + /* Clear PDC entry point - we won't use it */ + stw %r0,0x10(%r0) /* MEM_RENDEZ */ + stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ +#endif /*CONFIG_SMP*/ + +#ifdef __LP64__ + tophys_r1 %sp + + /* Save the rfi target address */ + ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 + tophys_r1 %r10 + std %r11, TASK_PT_GR11(%r10) + /* Switch to wide mode Superdome doesn't support narrow PDC + ** calls. + */ +1: mfia %rp /* clear upper part of pcoq */ + ldo 2f-1b(%rp),%rp + depdi 0,31,32,%rp + bv (%rp) + ssm PSW_SM_W,%r0 + + /* Set Wide mode as the "Default" (eg for traps) + ** First trap occurs *right* after (or part of) rfi for slave CPUs. + ** Someday, palo might not do this for the Monarch either. + */ +2: +#define MEM_PDC_LO 0x388 +#define MEM_PDC_HI 0x35C + ldw MEM_PDC_LO(%r0),%r3 + ldw MEM_PDC_HI(%r0),%r6 + depd %r6, 31, 32, %r3 /* move to upper word */ + + ldo PDC_PSW(%r0),%arg0 /* 21 */ + ldo PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */ + ldo PDC_PSW_WIDE_BIT(%r0),%arg2 /* 2 */ + load32 PA(stext_pdc_ret), %rp + bv (%r3) + copy %r0,%arg3 + +stext_pdc_ret: + /* restore rfi target address*/ + ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10 + tophys_r1 %r10 + ldd TASK_PT_GR11(%r10), %r11 + tovirt_r1 %sp +#endif + + /* PARANOID: clear user scratch/user space SR's */ + mtsp %r0,%sr0 + mtsp %r0,%sr1 + mtsp %r0,%sr2 + mtsp %r0,%sr3 + + /* Initialize Protection Registers */ + mtctl %r0,%cr8 + mtctl %r0,%cr9 + mtctl %r0,%cr12 + mtctl %r0,%cr13 + + /* Prepare to RFI! Man all the cannons! */ + + /* Initialize the global data pointer */ + loadgp + + /* Set up our interrupt table. HPMCs might not work after this! + * + * We need to install the correct iva for PA1.1 or PA2.0. The + * following short sequence of instructions can determine this + * (without being illegal on a PA1.1 machine). + */ +#ifndef __LP64__ + ldi 32,%r10 + mtctl %r10,%cr11 + .level 2.0 + mfctl,w %cr11,%r10 + .level 1.1 + comib,<>,n 0,%r10,$is_pa20 + ldil L%PA(fault_vector_11),%r10 + b $install_iva + ldo R%PA(fault_vector_11)(%r10),%r10 + +$is_pa20: + .level LEVEL /* restore 1.1 || 2.0w */ +#endif /*!LP64*/ + load32 PA(fault_vector_20),%r10 + +$install_iva: + mtctl %r10,%cr14 + +#ifdef __LP64__ + b aligned_rfi + nop + + .align 256 +aligned_rfi: + ssm 0,0 + nop /* 1 */ + nop /* 2 */ + nop /* 3 */ + nop /* 4 */ + nop /* 5 */ + nop /* 6 */ + nop /* 7 */ + nop /* 8 */ +#endif + +#ifdef __LP64__ /* move to psw.h? */ +#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R +#else +#define PSW_BITS PSW_SM_Q +#endif + +$rfi: + /* turn off troublesome PSW bits */ + rsm PSW_BITS,%r0 + + /* kernel PSW: + * - no interruptions except HPMC and TOC (which are handled by PDC) + * - Q bit set (IODC / PDC interruptions) + * - big-endian + * - virtually mapped + */ + load32 KERNEL_PSW,%r10 + mtctl %r10,%ipsw + + /* Set the space pointers for the post-RFI world + ** Clear the two-level IIA Space Queue, effectively setting + ** Kernel space. + */ + mtctl %r0,%cr17 /* Clear IIASQ tail */ + mtctl %r0,%cr17 /* Clear IIASQ head */ + + /* Load RFI target into PC queue */ + mtctl %r11,%cr18 /* IIAOQ head */ + ldo 4(%r11),%r11 + mtctl %r11,%cr18 /* IIAOQ tail */ + + /* Jump to hyperspace */ + rfi + nop + + .procend + +#ifdef CONFIG_SMP + + .import smp_init_current_idle_task,data + .import smp_callin,code + +#ifndef __LP64__ +smp_callin_rtn: + .proc + .callinfo + break 1,1 /* Break if returned from start_secondary */ + nop + nop + .procend +#endif /*!LP64*/ + +/*************************************************************************** +* smp_slave_stext is executed by all non-monarch Processors when the Monarch +* pokes the slave CPUs in smp.c:smp_boot_cpus(). +* +* Once here, registers values are initialized in order to branch to virtual +* mode. Once all available/eligible CPUs are in virtual mode, all are +* released and start out by executing their own idle task. +*****************************************************************************/ +smp_slave_stext: + .proc + .callinfo + + /* + ** Initialize Space registers + */ + mtsp %r0,%sr4 + mtsp %r0,%sr5 + mtsp %r0,%sr6 + mtsp %r0,%sr7 + + /* Initialize the SP - monarch sets up smp_init_current_idle_task */ + load32 PA(smp_init_current_idle_task),%sp + LDREG 0(%sp),%sp /* load task address */ + tophys_r1 %sp + LDREG TASK_THREAD_INFO(%sp),%sp + mtctl %sp,%cr30 /* store in cr30 */ + ldo THREAD_SZ_ALGN(%sp),%sp + + /* point CPU to kernel page tables */ + load32 PA(swapper_pg_dir),%r4 + mtctl %r4,%cr24 /* Initialize kernel root pointer */ + mtctl %r4,%cr25 /* Initialize user root pointer */ + +#ifdef __LP64__ + /* Setup PDCE_PROC entry */ + copy %arg0,%r3 +#else + /* Load RFI *return* address in case smp_callin bails */ + load32 smp_callin_rtn,%r2 +#endif + + /* Load RFI target address. */ + load32 smp_callin,%r11 + + /* ok...common code can handle the rest */ + b common_stext + nop + + .procend +#endif /* CONFIG_SMP */ +#ifndef __LP64__ + .data + + .align 4 + .export $global$,data + + .type $global$,@object + .size $global$,4 +$global$: + .word 0 +#endif /*!LP64*/ diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S new file mode 100644 index 000000000000..c412c0adc4a9 --- /dev/null +++ b/arch/parisc/kernel/hpmc.S @@ -0,0 +1,304 @@ +/* + * HPMC (High Priority Machine Check) handler. + * + * Copyright (C) 1999 Philipp Rumpf + * Copyright (C) 1999 Hewlett-Packard (Frank Rowand) + * Copyright (C) 2000 Hewlett-Packard (John Marvin) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* + * This HPMC handler retrieves the HPMC pim data, resets IO and + * returns to the default trap handler with code set to 1 (HPMC). + * The default trap handler calls handle interruption, which + * does a stack and register dump. This at least allows kernel + * developers to get back to C code in virtual mode, where they + * have the option to examine and print values from memory that + * would help in debugging an HPMC caused by a software bug. + * + * There is more to do here: + * + * 1) On MP systems we need to synchronize processors + * before calling pdc/iodc. + * 2) We should be checking the system state and not + * returning to the fault handler if things are really + * bad. + * + */ + + .level 1.1 + .data + +#include +#include + + /* + * stack for os_hpmc, the HPMC handler. + * buffer for IODC procedures (for the HPMC handler). + * + * IODC requires 7K byte stack. That leaves 1K byte for os_hpmc. + */ + + .align 4096 +hpmc_stack: + .block 16384 + +#define HPMC_IODC_BUF_SIZE 0x8000 + + .align 4096 +hpmc_iodc_buf: + .block HPMC_IODC_BUF_SIZE + + .align 8 +hpmc_raddr: + .block 128 + +#define HPMC_PIM_DATA_SIZE 896 /* Enough to hold all architected 2.0 state */ + + .export hpmc_pim_data, data + .align 8 +hpmc_pim_data: + .block HPMC_PIM_DATA_SIZE + + .text + + .export os_hpmc, code + .import intr_save, code + +os_hpmc: + + /* + * registers modified: + * + * Using callee saves registers without saving them. The + * original values are in the pim dump if we need them. + * + * r2 (rp) return pointer + * r3 address of PDCE_PROC + * r4 scratch + * r5 scratch + * r23 (arg3) procedure arg + * r24 (arg2) procedure arg + * r25 (arg1) procedure arg + * r26 (arg0) procedure arg + * r30 (sp) stack pointer + * + * registers read: + * + * r26 contains address of PDCE_PROC on entry + * r28 (ret0) return value from procedure + */ + + copy arg0, %r3 /* save address of PDCE_PROC */ + + /* + * disable nested HPMCs + * + * Increment os_hpmc checksum to invalidate it. + * Do this before turning the PSW M bit off. + */ + + mfctl %cr14, %r4 + ldw 52(%r4),%r5 + addi 1,%r5,%r5 + stw %r5,52(%r4) + + /* MP_FIXME: synchronize all processors. */ + + /* Setup stack pointer. */ + + load32 PA(hpmc_stack),sp + + ldo 128(sp),sp /* leave room for arguments */ + + /* + * Most PDC routines require that the M bit be off. + * So turn on the Q bit and turn off the M bit. + */ + + ldo 8(%r0),%r4 /* PSW Q on, PSW M off */ + mtctl %r4,ipsw + mtctl %r0,pcsq + mtctl %r0,pcsq + load32 PA(os_hpmc_1),%r4 + mtctl %r4,pcoq + ldo 4(%r4),%r4 + mtctl %r4,pcoq + rfi + nop + +os_hpmc_1: + + /* Call PDC_PIM to get HPMC pim info */ + + /* + * Note that on some newer boxes, PDC_PIM must be called + * before PDC_IO if you want IO to be reset. PDC_PIM sets + * a flag that PDC_IO examines. + */ + + ldo PDC_PIM(%r0), arg0 + ldo PDC_PIM_HPMC(%r0),arg1 /* Transfer HPMC data */ + load32 PA(hpmc_raddr),arg2 + load32 PA(hpmc_pim_data),arg3 + load32 HPMC_PIM_DATA_SIZE,%r4 + stw %r4,-52(sp) + + ldil L%PA(os_hpmc_2), rp + bv (r3) /* call pdce_proc */ + ldo R%PA(os_hpmc_2)(rp), rp + +os_hpmc_2: + comib,<> 0,ret0, os_hpmc_fail + + /* Reset IO by calling the hversion dependent PDC_IO routine */ + + ldo PDC_IO(%r0),arg0 + ldo 0(%r0),arg1 /* log IO errors */ + ldo 0(%r0),arg2 /* reserved */ + ldo 0(%r0),arg3 /* reserved */ + stw %r0,-52(sp) /* reserved */ + + ldil L%PA(os_hpmc_3),rp + bv (%r3) /* call pdce_proc */ + ldo R%PA(os_hpmc_3)(rp),rp + +os_hpmc_3: + + /* FIXME? Check for errors from PDC_IO (-1 might be OK) */ + + /* + * Initialize the IODC console device (HPA,SPA, path etc. + * are stored on page 0. + */ + + /* + * Load IODC into hpmc_iodc_buf by calling PDC_IODC. + * Note that PDC_IODC handles flushing the appropriate + * data and instruction cache lines. + */ + + ldo PDC_IODC(%r0),arg0 + ldo PDC_IODC_READ(%r0),arg1 + load32 PA(hpmc_raddr),arg2 + ldw BOOT_CONSOLE_HPA_OFFSET(%r0),arg3 /* console hpa */ + ldo PDC_IODC_RI_INIT(%r0),%r4 + stw %r4,-52(sp) + load32 PA(hpmc_iodc_buf),%r4 + stw %r4,-56(sp) + load32 HPMC_IODC_BUF_SIZE,%r4 + stw %r4,-60(sp) + + ldil L%PA(os_hpmc_4),rp + bv (%r3) /* call pdce_proc */ + ldo R%PA(os_hpmc_4)(rp),rp + +os_hpmc_4: + comib,<> 0,ret0,os_hpmc_fail + + /* Call the entry init (just loaded by PDC_IODC) */ + + ldw BOOT_CONSOLE_HPA_OFFSET(%r0),arg0 /* console hpa */ + ldo ENTRY_INIT_MOD_DEV(%r0), arg1 + ldw BOOT_CONSOLE_SPA_OFFSET(%r0),arg2 /* console spa */ + depi 0,31,11,arg2 /* clear bits 21-31 */ + ldo BOOT_CONSOLE_PATH_OFFSET(%r0),arg3 /* console path */ + load32 PA(hpmc_raddr),%r4 + stw %r4, -52(sp) + stw %r0, -56(sp) /* HV */ + stw %r0, -60(sp) /* HV */ + stw %r0, -64(sp) /* HV */ + stw %r0, -68(sp) /* lang, must be zero */ + + load32 PA(hpmc_iodc_buf),%r5 + ldil L%PA(os_hpmc_5),rp + bv (%r5) + ldo R%PA(os_hpmc_5)(rp),rp + +os_hpmc_5: + comib,<> 0,ret0,os_hpmc_fail + + /* Prepare to call intr_save */ + + /* + * Load kernel page directory (load into user also, since + * we don't intend to ever return to user land anyway) + */ + + load32 PA(swapper_pg_dir),%r4 + mtctl %r4,%cr24 /* Initialize kernel root pointer */ + mtctl %r4,%cr25 /* Initialize user root pointer */ + + /* Clear sr4-sr7 */ + + mtsp %r0, %sr4 + mtsp %r0, %sr5 + mtsp %r0, %sr6 + mtsp %r0, %sr7 + + tovirt_r1 %r30 /* make sp virtual */ + + rsm 8,%r0 /* Clear Q bit */ + ldi 1,%r8 /* Set trap code to "1" for HPMC */ + load32 PA(intr_save),%r1 + be 0(%sr7,%r1) + nop + +os_hpmc_fail: + + /* + * Reset the system + * + * Some systems may lockup from a broadcast reset, so try the + * hversion PDC_BROADCAST_RESET() first. + * MP_FIXME: reset all processors if more than one central bus. + */ + + /* PDC_BROADCAST_RESET() */ + + ldo PDC_BROADCAST_RESET(%r0),arg0 + ldo 0(%r0),arg1 /* do reset */ + + ldil L%PA(os_hpmc_6),rp + bv (%r3) /* call pdce_proc */ + ldo R%PA(os_hpmc_6)(rp),rp + +os_hpmc_6: + + /* + * possible return values: + * -1 non-existent procedure + * -2 non-existent option + * -16 unaligned stack + * + * If call returned, do a broadcast reset. + */ + + ldil L%0xfffc0000,%r4 /* IO_BROADCAST */ + ldo 5(%r0),%r5 + stw %r5,48(%r4) /* CMD_RESET to IO_COMMAND offset */ + + b . + nop + + /* this label used to compute os_hpmc checksum */ + + .export os_hpmc_end, code + +os_hpmc_end: + + nop diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c new file mode 100644 index 000000000000..7e898fd64415 --- /dev/null +++ b/arch/parisc/kernel/init_task.c @@ -0,0 +1,76 @@ +/* + * Static declaration of "init" task data structure. + * + * Copyright (C) 2000 Paul Bame + * Copyright (C) 2000-2001 John Marvin + * Copyright (C) 2001 Helge Deller + * Copyright (C) 2002 Matthew Wilcox + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial task structure. + * + * We need to make sure that this is 16384-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +unsigned char interrupt_stack[ISTACK_SIZE] __attribute__ ((section("init_istack"), aligned(4096))); +union thread_union init_thread_union + __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + +#ifdef __LP64__ +/* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout + * with the first pmd adjacent to the pgd and below it. gcc doesn't actually + * guarantee that global objects will be laid out in memory in the same order + * as the order of declaration, so put these in different sections and use + * the linker script to order them. */ +pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pmd"))) = { {0}, }; + +#endif +pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pgd"))) = { {0}, }; +pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pte"))) = { {0}, }; + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +EXPORT_SYMBOL(init_task); + +__asm__(".data"); +struct task_struct init_task = INIT_TASK(init_task); diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c new file mode 100644 index 000000000000..1a1c66422736 --- /dev/null +++ b/arch/parisc/kernel/inventory.c @@ -0,0 +1,612 @@ +/* + * inventory.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (c) 1999 The Puffin Group (David Kennedy and Alex deVries) + * Copyright (c) 2001 Matthew Wilcox for Hewlett-Packard + * + * These are the routines to discover what hardware exists in this box. + * This task is complicated by there being 3 different ways of + * performing an inventory, depending largely on the age of the box. + * The recommended way to do this is to check to see whether the machine + * is a `Snake' first, then try System Map, then try PAT. We try System + * Map before checking for a Snake -- this probably doesn't cause any + * problems, but... + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* +** Debug options +** DEBUG_PAT Dump details which PDC PAT provides about ranges/devices. +*/ +#undef DEBUG_PAT + +int pdc_type = PDC_TYPE_ILLEGAL; + +void __init setup_pdc(void) +{ + long status; + unsigned int bus_id; + struct pdc_system_map_mod_info module_result; + struct pdc_module_path module_path; + struct pdc_model model; +#ifdef __LP64__ + struct pdc_pat_cell_num cell_info; +#endif + + /* Determine the pdc "type" used on this machine */ + + printk(KERN_INFO "Determining PDC firmware type: "); + + status = pdc_system_map_find_mods(&module_result, &module_path, 0); + if (status == PDC_OK) { + pdc_type = PDC_TYPE_SYSTEM_MAP; + printk("System Map.\n"); + return; + } + + /* + * If the machine doesn't support PDC_SYSTEM_MAP then either it + * is a pdc pat box, or it is an older box. All 64 bit capable + * machines are either pdc pat boxes or they support PDC_SYSTEM_MAP. + */ + + /* + * TODO: We should test for 64 bit capability and give a + * clearer message. + */ + +#ifdef __LP64__ + status = pdc_pat_cell_get_number(&cell_info); + if (status == PDC_OK) { + pdc_type = PDC_TYPE_PAT; + printk("64 bit PAT.\n"); + return; + } +#endif + + /* Check the CPU's bus ID. There's probably a better test. */ + + status = pdc_model_info(&model); + + bus_id = (model.hversion >> (4 + 7)) & 0x1f; + + switch (bus_id) { + case 0x4: /* 720, 730, 750, 735, 755 */ + case 0x6: /* 705, 710 */ + case 0x7: /* 715, 725 */ + case 0x8: /* 745, 747, 742 */ + case 0xA: /* 712 and similiar */ + case 0xC: /* 715/64, at least */ + + pdc_type = PDC_TYPE_SNAKE; + printk("Snake.\n"); + return; + + default: /* Everything else */ + + printk("Unsupported.\n"); + panic("If this is a 64-bit machine, please try a 64-bit kernel.\n"); + } +} + +#define PDC_PAGE_ADJ_SHIFT (PAGE_SHIFT - 12) /* pdc pages are always 4k */ + +static void __init +set_pmem_entry(physmem_range_t *pmem_ptr, unsigned long start, + unsigned long pages4k) +{ + /* Rather than aligning and potentially throwing away + * memory, we'll assume that any ranges are already + * nicely aligned with any reasonable page size, and + * panic if they are not (it's more likely that the + * pdc info is bad in this case). + */ + + if ( ((start & (PAGE_SIZE - 1)) != 0) + || ((pages4k & ((1UL << PDC_PAGE_ADJ_SHIFT) - 1)) != 0) ) { + + panic("Memory range doesn't align with page size!\n"); + } + + pmem_ptr->start_pfn = (start >> PAGE_SHIFT); + pmem_ptr->pages = (pages4k >> PDC_PAGE_ADJ_SHIFT); +} + +static void __init pagezero_memconfig(void) +{ + unsigned long npages; + + /* Use the 32 bit information from page zero to create a single + * entry in the pmem_ranges[] table. + * + * We currently don't support machines with contiguous memory + * >= 4 Gb, who report that memory using 64 bit only fields + * on page zero. It's not worth doing until it can be tested, + * and it is not clear we can support those machines for other + * reasons. + * + * If that support is done in the future, this is where it + * should be done. + */ + + npages = (PAGE_ALIGN(PAGE0->imm_max_mem) >> PAGE_SHIFT); + set_pmem_entry(pmem_ranges,0UL,npages); + npmem_ranges = 1; +} + +#ifdef __LP64__ + +/* All of the PDC PAT specific code is 64-bit only */ + +/* +** The module object is filled via PDC_PAT_CELL[Return Cell Module]. +** If a module is found, register module will get the IODC bytes via +** pdc_iodc_read() using the PA view of conf_base_addr for the hpa parameter. +** +** The IO view can be used by PDC_PAT_CELL[Return Cell Module] +** only for SBAs and LBAs. This view will cause an invalid +** argument error for all other cell module types. +** +*/ + +static int __init +pat_query_module(ulong pcell_loc, ulong mod_index) +{ + pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; + unsigned long bytecnt; + unsigned long temp; /* 64-bit scratch value */ + long status; /* PDC return value status */ + struct parisc_device *dev; + + /* return cell module (PA or Processor view) */ + status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, + PA_VIEW, &pa_pdc_cell); + + if (status != PDC_OK) { + /* no more cell modules or error */ + return status; + } + + temp = pa_pdc_cell.cba; + dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); + if (!dev) { + return PDC_NE_MOD; + } + + /* alloc_pa_dev sets dev->hpa */ + + /* + ** save parameters in the parisc_device + ** (The idea being the device driver will call pdc_pat_cell_module() + ** and store the results in its own data structure.) + */ + dev->pcell_loc = pcell_loc; + dev->mod_index = mod_index; + + /* save generic info returned from the call */ + /* REVISIT: who is the consumer of this? not sure yet... */ + dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */ + dev->pmod_loc = pa_pdc_cell.mod_location; + + register_parisc_device(dev); /* advertise device */ + +#ifdef DEBUG_PAT + pdc_pat_cell_mod_maddr_block_t io_pdc_cell; + /* dump what we see so far... */ + switch (PAT_GET_ENTITY(dev->mod_info)) { + unsigned long i; + + case PAT_ENTITY_PROC: + printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n", + pa_pdc_cell.mod[0]); + break; + + case PAT_ENTITY_MEM: + printk(KERN_DEBUG + "PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n", + pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], + pa_pdc_cell.mod[2]); + break; + case PAT_ENTITY_CA: + printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc); + break; + + case PAT_ENTITY_PBC: + printk(KERN_DEBUG "PAT_ENTITY_PBC: "); + goto print_ranges; + + case PAT_ENTITY_SBA: + printk(KERN_DEBUG "PAT_ENTITY_SBA: "); + goto print_ranges; + + case PAT_ENTITY_LBA: + printk(KERN_DEBUG "PAT_ENTITY_LBA: "); + + print_ranges: + pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index, + IO_VIEW, &io_pdc_cell); + printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]); + for (i = 0; i < pa_pdc_cell.mod[1]; i++) { + printk(KERN_DEBUG + " PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", + i, pa_pdc_cell.mod[2 + i * 3], /* type */ + pa_pdc_cell.mod[3 + i * 3], /* start */ + pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + printk(KERN_DEBUG + " IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", + i, io_pdc_cell.mod[2 + i * 3], /* type */ + io_pdc_cell.mod[3 + i * 3], /* start */ + io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */ + } + printk(KERN_DEBUG "\n"); + break; + } +#endif /* DEBUG_PAT */ + return PDC_OK; +} + + +/* pat pdc can return information about a variety of different + * types of memory (e.g. firmware,i/o, etc) but we only care about + * the usable physical ram right now. Since the firmware specific + * information is allocated on the stack, we'll be generous, in + * case there is a lot of other information we don't care about. + */ + +#define PAT_MAX_RANGES (4 * MAX_PHYSMEM_RANGES) + +static void __init pat_memconfig(void) +{ + unsigned long actual_len; + struct pdc_pat_pd_addr_map_entry mem_table[PAT_MAX_RANGES+1]; + struct pdc_pat_pd_addr_map_entry *mtbl_ptr; + physmem_range_t *pmem_ptr; + long status; + int entries; + unsigned long length; + int i; + + length = (PAT_MAX_RANGES + 1) * sizeof(struct pdc_pat_pd_addr_map_entry); + + status = pdc_pat_pd_get_addr_map(&actual_len, mem_table, length, 0L); + + if ((status != PDC_OK) + || ((actual_len % sizeof(struct pdc_pat_pd_addr_map_entry)) != 0)) { + + /* The above pdc call shouldn't fail, but, just in + * case, just use the PAGE0 info. + */ + + printk("\n\n\n"); + printk(KERN_WARNING "WARNING! Could not get full memory configuration. " + "All memory may not be used!\n\n\n"); + pagezero_memconfig(); + return; + } + + entries = actual_len / sizeof(struct pdc_pat_pd_addr_map_entry); + + if (entries > PAT_MAX_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory may not be used!\n"); + } + + /* Copy information into the firmware independent pmem_ranges + * array, skipping types we don't care about. Notice we said + * "may" above. We'll use all the entries that were returned. + */ + + npmem_ranges = 0; + mtbl_ptr = mem_table; + pmem_ptr = pmem_ranges; /* Global firmware independent table */ + for (i = 0; i < entries; i++,mtbl_ptr++) { + if ( (mtbl_ptr->entry_type != PAT_MEMORY_DESCRIPTOR) + || (mtbl_ptr->memory_type != PAT_MEMTYPE_MEMORY) + || (mtbl_ptr->pages == 0) + || ( (mtbl_ptr->memory_usage != PAT_MEMUSE_GENERAL) + && (mtbl_ptr->memory_usage != PAT_MEMUSE_GI) + && (mtbl_ptr->memory_usage != PAT_MEMUSE_GNI) ) ) { + + continue; + } + + if (npmem_ranges == MAX_PHYSMEM_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory will not be used!\n"); + break; + } + + set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages); + npmem_ranges++; + } +} + +static int __init pat_inventory(void) +{ + int status; + ulong mod_index = 0; + struct pdc_pat_cell_num cell_info; + + /* + ** Note: Prelude (and it's successors: Lclass, A400/500) only + ** implement PDC_PAT_CELL sub-options 0 and 2. + */ + status = pdc_pat_cell_get_number(&cell_info); + if (status != PDC_OK) { + return 0; + } + +#ifdef DEBUG_PAT + printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num, + cell_info.cell_loc); +#endif + + while (PDC_OK == pat_query_module(cell_info.cell_loc, mod_index)) { + mod_index++; + } + + return mod_index; +} + +/* We only look for extended memory ranges on a 64 bit capable box */ +static void __init sprockets_memconfig(void) +{ + struct pdc_memory_table_raddr r_addr; + struct pdc_memory_table mem_table[MAX_PHYSMEM_RANGES]; + struct pdc_memory_table *mtbl_ptr; + physmem_range_t *pmem_ptr; + long status; + int entries; + int i; + + status = pdc_mem_mem_table(&r_addr,mem_table, + (unsigned long)MAX_PHYSMEM_RANGES); + + if (status != PDC_OK) { + + /* The above pdc call only works on boxes with sprockets + * firmware (newer B,C,J class). Other non PAT PDC machines + * do support more than 3.75 Gb of memory, but we don't + * support them yet. + */ + + pagezero_memconfig(); + return; + } + + if (r_addr.entries_total > MAX_PHYSMEM_RANGES) { + printk(KERN_WARNING "This Machine has more memory ranges than we support!\n"); + printk(KERN_WARNING "Some memory will not be used!\n"); + } + + entries = (int)r_addr.entries_returned; + + npmem_ranges = 0; + mtbl_ptr = mem_table; + pmem_ptr = pmem_ranges; /* Global firmware independent table */ + for (i = 0; i < entries; i++,mtbl_ptr++) { + set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages); + npmem_ranges++; + } +} + +#else /* !__LP64__ */ + +#define pat_inventory() do { } while (0) +#define pat_memconfig() do { } while (0) +#define sprockets_memconfig() pagezero_memconfig() + +#endif /* !__LP64__ */ + + +#ifndef CONFIG_PA20 + +/* Code to support Snake machines (7[2350], 7[235]5, 715/Scorpio) */ + +static struct parisc_device * __init +legacy_create_device(struct pdc_memory_map *r_addr, + struct pdc_module_path *module_path) +{ + struct parisc_device *dev; + int status = pdc_mem_map_hpa(r_addr, module_path); + if (status != PDC_OK) + return NULL; + + dev = alloc_pa_dev(r_addr->hpa, &module_path->path); + if (dev == NULL) + return NULL; + + register_parisc_device(dev); + return dev; +} + +/** + * snake_inventory + * + * Before PDC_SYSTEM_MAP was invented, the PDC_MEM_MAP call was used. + * To use it, we initialise the mod_path.bc to 0xff and try all values of + * mod to get the HPA for the top-level devices. Bus adapters may have + * sub-devices which are discovered by setting bc[5] to 0 and bc[4] to the + * module, then trying all possible functions. + */ +static void __init snake_inventory(void) +{ + int mod; + for (mod = 0; mod < 16; mod++) { + struct parisc_device *dev; + struct pdc_module_path module_path; + struct pdc_memory_map r_addr; + unsigned int func; + + memset(module_path.path.bc, 0xff, 6); + module_path.path.mod = mod; + dev = legacy_create_device(&r_addr, &module_path); + if ((!dev) || (dev->id.hw_type != HPHW_BA)) + continue; + + memset(module_path.path.bc, 0xff, 4); + module_path.path.bc[4] = mod; + + for (func = 0; func < 16; func++) { + module_path.path.bc[5] = 0; + module_path.path.mod = func; + legacy_create_device(&r_addr, &module_path); + } + } +} + +#else /* CONFIG_PA20 */ +#define snake_inventory() do { } while (0) +#endif /* CONFIG_PA20 */ + +/* Common 32/64 bit based code goes here */ + +/** + * add_system_map_addresses - Add additional addresses to the parisc device. + * @dev: The parisc device. + * @num_addrs: Then number of addresses to add; + * @module_instance: The system_map module instance. + * + * This function adds any additional addresses reported by the system_map + * firmware to the parisc device. + */ +static void __init +add_system_map_addresses(struct parisc_device *dev, int num_addrs, + int module_instance) +{ + int i; + long status; + struct pdc_system_map_addr_info addr_result; + + dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL); + if(!dev->addr) { + printk(KERN_ERR "%s %s(): memory allocation failure\n", + __FILE__, __FUNCTION__); + return; + } + + for(i = 1; i <= num_addrs; ++i) { + status = pdc_system_map_find_addrs(&addr_result, + module_instance, i); + if(PDC_OK == status) { + dev->addr[dev->num_addrs] = (unsigned long)addr_result.mod_addr; + dev->num_addrs++; + } else { + printk(KERN_WARNING + "Bad PDC_FIND_ADDRESS status return (%ld) for index %d\n", + status, i); + } + } +} + +/** + * system_map_inventory - Retrieve firmware devices via SYSTEM_MAP. + * + * This function attempts to retrieve and register all the devices firmware + * knows about via the SYSTEM_MAP PDC call. + */ +static void __init system_map_inventory(void) +{ + int i; + long status = PDC_OK; + + for (i = 0; i < 256; i++) { + struct parisc_device *dev; + struct pdc_system_map_mod_info module_result; + struct pdc_module_path module_path; + + status = pdc_system_map_find_mods(&module_result, + &module_path, i); + if ((status == PDC_BAD_PROC) || (status == PDC_NE_MOD)) + break; + if (status != PDC_OK) + continue; + + dev = alloc_pa_dev(module_result.mod_addr, &module_path.path); + if (!dev) + continue; + + register_parisc_device(dev); + + /* if available, get the additional addresses for a module */ + if (!module_result.add_addrs) + continue; + + add_system_map_addresses(dev, module_result.add_addrs, i); + } + + walk_central_bus(); + return; +} + +void __init do_memory_inventory(void) +{ + switch (pdc_type) { + + case PDC_TYPE_PAT: + pat_memconfig(); + break; + + case PDC_TYPE_SYSTEM_MAP: + sprockets_memconfig(); + break; + + case PDC_TYPE_SNAKE: + pagezero_memconfig(); + return; + + default: + panic("Unknown PDC type!\n"); + } + + if (npmem_ranges == 0 || pmem_ranges[0].start_pfn != 0) { + printk(KERN_WARNING "Bad memory configuration returned!\n"); + printk(KERN_WARNING "Some memory may not be used!\n"); + pagezero_memconfig(); + } +} + +void __init do_device_inventory(void) +{ + printk(KERN_INFO "Searching for devices...\n"); + + init_parisc_bus(); + + switch (pdc_type) { + + case PDC_TYPE_PAT: + pat_inventory(); + break; + + case PDC_TYPE_SYSTEM_MAP: + system_map_inventory(); + break; + + case PDC_TYPE_SNAKE: + snake_inventory(); + break; + + default: + panic("Unknown PDC type!\n"); + } + printk(KERN_INFO "Found devices:\n"); + print_parisc_devices(); +} diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c new file mode 100644 index 000000000000..1d3824b670d1 --- /dev/null +++ b/arch/parisc/kernel/ioctl32.c @@ -0,0 +1,625 @@ +/* $Id: ioctl32.c,v 1.5 2002/10/18 00:21:43 varenet Exp $ + * ioctl32.c: Conversion between 32bit and 64bit native ioctls. + * + * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * + * These routines maintain argument size conversion between 32bit and 64bit + * ioctls. + */ + +#include + +#define INCLUDES +#include "compat_ioctl.c" + +#include +#include + +#define CODE +#include "compat_ioctl.c" + +/* Use this to get at 32-bit user passed pointers. + See sys_sparc32.c for description about these. */ +#define A(__x) ((unsigned long)(__x)) +/* The same for use with copy_from_user() and copy_to_user(). */ +#define B(__x) ((void *)(unsigned long)(__x)) + +#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) +/* This really belongs in include/linux/drm.h -DaveM */ +#include "../../../drivers/char/drm/drm.h" + +typedef struct drm32_version { + int version_major; /* Major version */ + int version_minor; /* Minor version */ + int version_patchlevel;/* Patch level */ + int name_len; /* Length of name buffer */ + u32 name; /* Name of driver */ + int date_len; /* Length of date buffer */ + u32 date; /* User-space buffer to hold date */ + int desc_len; /* Length of desc buffer */ + u32 desc; /* User-space buffer to hold desc */ +} drm32_version_t; +#define DRM32_IOCTL_VERSION DRM_IOWR(0x00, drm32_version_t) + +static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_version_t *uversion = (drm32_version_t *)arg; + char *name_ptr, *date_ptr, *desc_ptr; + u32 tmp1, tmp2, tmp3; + drm_version_t kversion; + mm_segment_t old_fs; + int ret; + + memset(&kversion, 0, sizeof(kversion)); + if (get_user(kversion.name_len, &uversion->name_len) || + get_user(kversion.date_len, &uversion->date_len) || + get_user(kversion.desc_len, &uversion->desc_len) || + get_user(tmp1, &uversion->name) || + get_user(tmp2, &uversion->date) || + get_user(tmp3, &uversion->desc)) + return -EFAULT; + + name_ptr = (char *) A(tmp1); + date_ptr = (char *) A(tmp2); + desc_ptr = (char *) A(tmp3); + + ret = -ENOMEM; + if (kversion.name_len && name_ptr) { + kversion.name = kmalloc(kversion.name_len, GFP_KERNEL); + if (!kversion.name) + goto out; + } + if (kversion.date_len && date_ptr) { + kversion.date = kmalloc(kversion.date_len, GFP_KERNEL); + if (!kversion.date) + goto out; + } + if (kversion.desc_len && desc_ptr) { + kversion.desc = kmalloc(kversion.desc_len, GFP_KERNEL); + if (!kversion.desc) + goto out; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl (fd, DRM_IOCTL_VERSION, (unsigned long)&kversion); + set_fs(old_fs); + + if (!ret) { + if ((kversion.name && + copy_to_user(name_ptr, kversion.name, kversion.name_len)) || + (kversion.date && + copy_to_user(date_ptr, kversion.date, kversion.date_len)) || + (kversion.desc && + copy_to_user(desc_ptr, kversion.desc, kversion.desc_len))) + ret = -EFAULT; + if (put_user(kversion.version_major, &uversion->version_major) || + put_user(kversion.version_minor, &uversion->version_minor) || + put_user(kversion.version_patchlevel, &uversion->version_patchlevel) || + put_user(kversion.name_len, &uversion->name_len) || + put_user(kversion.date_len, &uversion->date_len) || + put_user(kversion.desc_len, &uversion->desc_len)) + ret = -EFAULT; + } + +out: + if (kversion.name) + kfree(kversion.name); + if (kversion.date) + kfree(kversion.date); + if (kversion.desc) + kfree(kversion.desc); + return ret; +} + +typedef struct drm32_unique { + int unique_len; /* Length of unique */ + u32 unique; /* Unique name for driver instantiation */ +} drm32_unique_t; +#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t) +#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t) + +static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_unique_t *uarg = (drm32_unique_t *)arg; + drm_unique_t karg; + mm_segment_t old_fs; + char *uptr; + u32 tmp; + int ret; + + if (get_user(karg.unique_len, &uarg->unique_len)) + return -EFAULT; + karg.unique = NULL; + + if (get_user(tmp, &uarg->unique)) + return -EFAULT; + + uptr = (char *) A(tmp); + + if (uptr) { + karg.unique = kmalloc(karg.unique_len, GFP_KERNEL); + if (!karg.unique) + return -ENOMEM; + if (cmd == DRM32_IOCTL_SET_UNIQUE && + copy_from_user(karg.unique, uptr, karg.unique_len)) { + kfree(karg.unique); + return -EFAULT; + } + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + if (cmd == DRM32_IOCTL_GET_UNIQUE) + ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)&karg); + else + ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)&karg); + set_fs(old_fs); + + if (!ret) { + if (cmd == DRM32_IOCTL_GET_UNIQUE && + uptr != NULL && + copy_to_user(uptr, karg.unique, karg.unique_len)) + ret = -EFAULT; + if (put_user(karg.unique_len, &uarg->unique_len)) + ret = -EFAULT; + } + + if (karg.unique != NULL) + kfree(karg.unique); + + return ret; +} + +typedef struct drm32_map { + u32 offset; /* Requested physical address (0 for SAREA)*/ + u32 size; /* Requested physical size (bytes) */ + drm_map_type_t type; /* Type of memory to map */ + drm_map_flags_t flags; /* Flags */ + u32 handle; /* User-space: "Handle" to pass to mmap */ + /* Kernel-space: kernel-virtual address */ + int mtrr; /* MTRR slot used */ + /* Private data */ +} drm32_map_t; +#define DRM32_IOCTL_ADD_MAP DRM_IOWR(0x15, drm32_map_t) + +static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_map_t *uarg = (drm32_map_t *) arg; + drm_map_t karg; + mm_segment_t old_fs; + u32 tmp; + int ret; + + ret = get_user(karg.offset, &uarg->offset); + ret |= get_user(karg.size, &uarg->size); + ret |= get_user(karg.type, &uarg->type); + ret |= get_user(karg.flags, &uarg->flags); + ret |= get_user(tmp, &uarg->handle); + ret |= get_user(karg.mtrr, &uarg->mtrr); + if (ret) + return -EFAULT; + + karg.handle = (void *) A(tmp); + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg); + set_fs(old_fs); + + if (!ret) { + ret = put_user(karg.offset, &uarg->offset); + ret |= put_user(karg.size, &uarg->size); + ret |= put_user(karg.type, &uarg->type); + ret |= put_user(karg.flags, &uarg->flags); + tmp = (u32) (long)karg.handle; + ret |= put_user(tmp, &uarg->handle); + ret |= put_user(karg.mtrr, &uarg->mtrr); + if (ret) + ret = -EFAULT; + } + + return ret; +} + +typedef struct drm32_buf_info { + int count; /* Entries in list */ + u32 list; /* (drm_buf_desc_t *) */ +} drm32_buf_info_t; +#define DRM32_IOCTL_INFO_BUFS DRM_IOWR(0x18, drm32_buf_info_t) + +static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_buf_info_t *uarg = (drm32_buf_info_t *)arg; + drm_buf_desc_t *ulist; + drm_buf_info_t karg; + mm_segment_t old_fs; + int orig_count, ret; + u32 tmp; + + if (get_user(karg.count, &uarg->count) || + get_user(tmp, &uarg->list)) + return -EFAULT; + + ulist = (drm_buf_desc_t *) A(tmp); + + orig_count = karg.count; + + karg.list = kmalloc(karg.count * sizeof(drm_buf_desc_t), GFP_KERNEL); + if (!karg.list) + return -EFAULT; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long) &karg); + set_fs(old_fs); + + if (!ret) { + if (karg.count <= orig_count && + (copy_to_user(ulist, karg.list, + karg.count * sizeof(drm_buf_desc_t)))) + ret = -EFAULT; + if (put_user(karg.count, &uarg->count)) + ret = -EFAULT; + } + + kfree(karg.list); + + return ret; +} + +typedef struct drm32_buf_free { + int count; + u32 list; /* (int *) */ +} drm32_buf_free_t; +#define DRM32_IOCTL_FREE_BUFS DRM_IOW( 0x1a, drm32_buf_free_t) + +static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_buf_free_t *uarg = (drm32_buf_free_t *)arg; + drm_buf_free_t karg; + mm_segment_t old_fs; + int *ulist; + int ret; + u32 tmp; + + if (get_user(karg.count, &uarg->count) || + get_user(tmp, &uarg->list)) + return -EFAULT; + + ulist = (int *) A(tmp); + + karg.list = kmalloc(karg.count * sizeof(int), GFP_KERNEL); + if (!karg.list) + return -ENOMEM; + + ret = -EFAULT; + if (copy_from_user(karg.list, ulist, (karg.count * sizeof(int)))) + goto out; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long) &karg); + set_fs(old_fs); + +out: + kfree(karg.list); + + return ret; +} + +typedef struct drm32_buf_pub { + int idx; /* Index into master buflist */ + int total; /* Buffer size */ + int used; /* Amount of buffer in use (for DMA) */ + u32 address; /* Address of buffer (void *) */ +} drm32_buf_pub_t; + +typedef struct drm32_buf_map { + int count; /* Length of buflist */ + u32 virtual; /* Mmaped area in user-virtual (void *) */ + u32 list; /* Buffer information (drm_buf_pub_t *) */ +} drm32_buf_map_t; +#define DRM32_IOCTL_MAP_BUFS DRM_IOWR(0x19, drm32_buf_map_t) + +static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_buf_map_t *uarg = (drm32_buf_map_t *)arg; + drm32_buf_pub_t *ulist; + drm_buf_map_t karg; + mm_segment_t old_fs; + int orig_count, ret, i; + u32 tmp1, tmp2; + + if (get_user(karg.count, &uarg->count) || + get_user(tmp1, &uarg->virtual) || + get_user(tmp2, &uarg->list)) + return -EFAULT; + + karg.virtual = (void *) A(tmp1); + ulist = (drm32_buf_pub_t *) A(tmp2); + + orig_count = karg.count; + + karg.list = kmalloc(karg.count * sizeof(drm_buf_pub_t), GFP_KERNEL); + if (!karg.list) + return -ENOMEM; + + ret = -EFAULT; + for (i = 0; i < karg.count; i++) { + if (get_user(karg.list[i].idx, &ulist[i].idx) || + get_user(karg.list[i].total, &ulist[i].total) || + get_user(karg.list[i].used, &ulist[i].used) || + get_user(tmp1, &ulist[i].address)) + goto out; + + karg.list[i].address = (void *) A(tmp1); + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) &karg); + set_fs(old_fs); + + if (!ret) { + for (i = 0; i < orig_count; i++) { + tmp1 = (u32) (long) karg.list[i].address; + if (put_user(karg.list[i].idx, &ulist[i].idx) || + put_user(karg.list[i].total, &ulist[i].total) || + put_user(karg.list[i].used, &ulist[i].used) || + put_user(tmp1, &ulist[i].address)) { + ret = -EFAULT; + goto out; + } + } + if (put_user(karg.count, &uarg->count)) + ret = -EFAULT; + } + +out: + kfree(karg.list); + return ret; +} + +typedef struct drm32_dma { + /* Indices here refer to the offset into + buflist in drm_buf_get_t. */ + int context; /* Context handle */ + int send_count; /* Number of buffers to send */ + u32 send_indices; /* List of handles to buffers (int *) */ + u32 send_sizes; /* Lengths of data to send (int *) */ + drm_dma_flags_t flags; /* Flags */ + int request_count; /* Number of buffers requested */ + int request_size; /* Desired size for buffers */ + u32 request_indices; /* Buffer information (int *) */ + u32 request_sizes; /* (int *) */ + int granted_count; /* Number of buffers granted */ +} drm32_dma_t; +#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t) + +/* RED PEN The DRM layer blindly dereferences the send/request + * indice/size arrays even though they are userland + * pointers. -DaveM + */ +static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_dma_t *uarg = (drm32_dma_t *) arg; + int *u_si, *u_ss, *u_ri, *u_rs; + drm_dma_t karg; + mm_segment_t old_fs; + int ret; + u32 tmp1, tmp2, tmp3, tmp4; + + karg.send_indices = karg.send_sizes = NULL; + karg.request_indices = karg.request_sizes = NULL; + + if (get_user(karg.context, &uarg->context) || + get_user(karg.send_count, &uarg->send_count) || + get_user(tmp1, &uarg->send_indices) || + get_user(tmp2, &uarg->send_sizes) || + get_user(karg.flags, &uarg->flags) || + get_user(karg.request_count, &uarg->request_count) || + get_user(karg.request_size, &uarg->request_size) || + get_user(tmp3, &uarg->request_indices) || + get_user(tmp4, &uarg->request_sizes) || + get_user(karg.granted_count, &uarg->granted_count)) + return -EFAULT; + + u_si = (int *) A(tmp1); + u_ss = (int *) A(tmp2); + u_ri = (int *) A(tmp3); + u_rs = (int *) A(tmp4); + + if (karg.send_count) { + karg.send_indices = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL); + karg.send_sizes = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL); + + ret = -ENOMEM; + if (!karg.send_indices || !karg.send_sizes) + goto out; + + ret = -EFAULT; + if (copy_from_user(karg.send_indices, u_si, + (karg.send_count * sizeof(int))) || + copy_from_user(karg.send_sizes, u_ss, + (karg.send_count * sizeof(int)))) + goto out; + } + + if (karg.request_count) { + karg.request_indices = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL); + karg.request_sizes = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL); + + ret = -ENOMEM; + if (!karg.request_indices || !karg.request_sizes) + goto out; + + ret = -EFAULT; + if (copy_from_user(karg.request_indices, u_ri, + (karg.request_count * sizeof(int))) || + copy_from_user(karg.request_sizes, u_rs, + (karg.request_count * sizeof(int)))) + goto out; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long) &karg); + set_fs(old_fs); + + if (!ret) { + if (put_user(karg.context, &uarg->context) || + put_user(karg.send_count, &uarg->send_count) || + put_user(karg.flags, &uarg->flags) || + put_user(karg.request_count, &uarg->request_count) || + put_user(karg.request_size, &uarg->request_size) || + put_user(karg.granted_count, &uarg->granted_count)) + ret = -EFAULT; + + if (karg.send_count) { + if (copy_to_user(u_si, karg.send_indices, + (karg.send_count * sizeof(int))) || + copy_to_user(u_ss, karg.send_sizes, + (karg.send_count * sizeof(int)))) + ret = -EFAULT; + } + if (karg.request_count) { + if (copy_to_user(u_ri, karg.request_indices, + (karg.request_count * sizeof(int))) || + copy_to_user(u_rs, karg.request_sizes, + (karg.request_count * sizeof(int)))) + ret = -EFAULT; + } + } + +out: + if (karg.send_indices) + kfree(karg.send_indices); + if (karg.send_sizes) + kfree(karg.send_sizes); + if (karg.request_indices) + kfree(karg.request_indices); + if (karg.request_sizes) + kfree(karg.request_sizes); + + return ret; +} + +typedef struct drm32_ctx_res { + int count; + u32 contexts; /* (drm_ctx_t *) */ +} drm32_ctx_res_t; +#define DRM32_IOCTL_RES_CTX DRM_IOWR(0x26, drm32_ctx_res_t) + +static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + drm32_ctx_res_t *uarg = (drm32_ctx_res_t *) arg; + drm_ctx_t *ulist; + drm_ctx_res_t karg; + mm_segment_t old_fs; + int orig_count, ret; + u32 tmp; + + karg.contexts = NULL; + if (get_user(karg.count, &uarg->count) || + get_user(tmp, &uarg->contexts)) + return -EFAULT; + + ulist = (drm_ctx_t *) A(tmp); + + orig_count = karg.count; + if (karg.count && ulist) { + karg.contexts = kmalloc((karg.count * sizeof(drm_ctx_t)), GFP_KERNEL); + if (!karg.contexts) + return -ENOMEM; + if (copy_from_user(karg.contexts, ulist, + (karg.count * sizeof(drm_ctx_t)))) { + kfree(karg.contexts); + return -EFAULT; + } + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long) &karg); + set_fs(old_fs); + + if (!ret) { + if (orig_count) { + if (copy_to_user(ulist, karg.contexts, + (orig_count * sizeof(drm_ctx_t)))) + ret = -EFAULT; + } + if (put_user(karg.count, &uarg->count)) + ret = -EFAULT; + } + + if (karg.contexts) + kfree(karg.contexts); + + return ret; +} + +#endif + +#define HANDLE_IOCTL(cmd, handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, +#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd, sys_ioctl) + +#define IOCTL_TABLE_START struct ioctl_trans ioctl_start[] = { +#define IOCTL_TABLE_END }; + +IOCTL_TABLE_START +#include + +#define DECLARES +#include "compat_ioctl.c" + +/* Might be moved to compat_ioctl.h with some ifdefs... */ +COMPATIBLE_IOCTL(TIOCSTART) +COMPATIBLE_IOCTL(TIOCSTOP) +COMPATIBLE_IOCTL(TIOCSLTC) + +/* PA-specific ioctls */ +COMPATIBLE_IOCTL(PA_PERF_ON) +COMPATIBLE_IOCTL(PA_PERF_OFF) +COMPATIBLE_IOCTL(PA_PERF_VERSION) + +/* And these ioctls need translation */ +HANDLE_IOCTL(SIOCGPPPSTATS, dev_ifsioc) +HANDLE_IOCTL(SIOCGPPPCSTATS, dev_ifsioc) +HANDLE_IOCTL(SIOCGPPPVER, dev_ifsioc) + +#if defined(CONFIG_GEN_RTC) +COMPATIBLE_IOCTL(RTC_AIE_ON) +COMPATIBLE_IOCTL(RTC_AIE_OFF) +COMPATIBLE_IOCTL(RTC_UIE_ON) +COMPATIBLE_IOCTL(RTC_UIE_OFF) +COMPATIBLE_IOCTL(RTC_PIE_ON) +COMPATIBLE_IOCTL(RTC_PIE_OFF) +COMPATIBLE_IOCTL(RTC_WIE_ON) +COMPATIBLE_IOCTL(RTC_WIE_OFF) +COMPATIBLE_IOCTL(RTC_ALM_SET) /* struct rtc_time only has ints */ +COMPATIBLE_IOCTL(RTC_ALM_READ) /* struct rtc_time only has ints */ +COMPATIBLE_IOCTL(RTC_RD_TIME) /* struct rtc_time only has ints */ +COMPATIBLE_IOCTL(RTC_SET_TIME) /* struct rtc_time only has ints */ +HANDLE_IOCTL(RTC_IRQP_READ, w_long) +COMPATIBLE_IOCTL(RTC_IRQP_SET) +HANDLE_IOCTL(RTC_EPOCH_READ, w_long) +COMPATIBLE_IOCTL(RTC_EPOCH_SET) +#endif + +#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) +HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version); +HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique); +HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique); +HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap); +HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs); +HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs); +HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs); +HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma); +HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx); +#endif /* DRM */ +IOCTL_TABLE_END + +int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c new file mode 100644 index 000000000000..006385dbee66 --- /dev/null +++ b/arch/parisc/kernel/irq.c @@ -0,0 +1,343 @@ +/* + * Code to handle x86 style IRQs plus some generic interrupt stuff. + * + * Copyright (C) 1992 Linus Torvalds + * Copyright (C) 1994, 1995, 1996, 1997, 1998 Ralf Baechle + * Copyright (C) 1999 SuSE GmbH (Philipp Rumpf, prumpf@tux.org) + * Copyright (C) 1999-2000 Grant Grundler + * Copyright (c) 2005 Matthew Wilcox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef PARISC_IRQ_CR16_COUNTS + +extern irqreturn_t timer_interrupt(int, void *, struct pt_regs *); +extern irqreturn_t ipi_interrupt(int, void *, struct pt_regs *); + +#define EIEM_MASK(irq) (1UL<<(CPU_IRQ_MAX - irq)) + +/* Bits in EIEM correlate with cpu_irq_action[]. +** Numbered *Big Endian*! (ie bit 0 is MSB) +*/ +static volatile unsigned long cpu_eiem = 0; + +static void cpu_set_eiem(void *info) +{ + set_eiem((unsigned long) info); +} + +static inline void cpu_disable_irq(unsigned int irq) +{ + unsigned long eirr_bit = EIEM_MASK(irq); + + cpu_eiem &= ~eirr_bit; + on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1); +} + +static void cpu_enable_irq(unsigned int irq) +{ + unsigned long eirr_bit = EIEM_MASK(irq); + + mtctl(eirr_bit, 23); /* clear EIRR bit before unmasking */ + cpu_eiem |= eirr_bit; + on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1); +} + +static unsigned int cpu_startup_irq(unsigned int irq) +{ + cpu_enable_irq(irq); + return 0; +} + +void no_ack_irq(unsigned int irq) { } +void no_end_irq(unsigned int irq) { } + +static struct hw_interrupt_type cpu_interrupt_type = { + .typename = "CPU", + .startup = cpu_startup_irq, + .shutdown = cpu_disable_irq, + .enable = cpu_enable_irq, + .disable = cpu_disable_irq, + .ack = no_ack_irq, + .end = no_end_irq, +// .set_affinity = cpu_set_affinity_irq, +}; + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + unsigned long flags; + + if (i == 0) { + seq_puts(p, " "); + for_each_online_cpu(j) + seq_printf(p, " CPU%d", j); + +#ifdef PARISC_IRQ_CR16_COUNTS + seq_printf(p, " [min/avg/max] (CPU cycle counts)"); +#endif + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + struct irqaction *action; + + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto skip; + seq_printf(p, "%3d: ", i); +#ifdef CONFIG_SMP + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#else + seq_printf(p, "%10u ", kstat_irqs(i)); +#endif + + seq_printf(p, " %14s", irq_desc[i].handler->typename); +#ifndef PARISC_IRQ_CR16_COUNTS + seq_printf(p, " %s", action->name); + + while ((action = action->next)) + seq_printf(p, ", %s", action->name); +#else + for ( ;action; action = action->next) { + unsigned int k, avg, min, max; + + min = max = action->cr16_hist[0]; + + for (avg = k = 0; k < PARISC_CR16_HIST_SIZE; k++) { + int hist = action->cr16_hist[k]; + + if (hist) { + avg += hist; + } else + break; + + if (hist > max) max = hist; + if (hist < min) min = hist; + } + + avg /= k; + seq_printf(p, " %s[%d/%d/%d]", action->name, + min,avg,max); + } +#endif + + seq_putc(p, '\n'); + skip: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + + return 0; +} + + + +/* +** The following form a "set": Virtual IRQ, Transaction Address, Trans Data. +** Respectively, these map to IRQ region+EIRR, Processor HPA, EIRR bit. +** +** To use txn_XXX() interfaces, get a Virtual IRQ first. +** Then use that to get the Transaction address and data. +*/ + +int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *type, void *data) +{ + if (irq_desc[irq].action) + return -EBUSY; + if (irq_desc[irq].handler != &cpu_interrupt_type) + return -EBUSY; + + if (type) { + irq_desc[irq].handler = type; + irq_desc[irq].handler_data = data; + cpu_interrupt_type.enable(irq); + } + return 0; +} + +int txn_claim_irq(int irq) +{ + return cpu_claim_irq(irq, NULL, NULL) ? -1 : irq; +} + +/* + * The bits_wide parameter accommodates the limitations of the HW/SW which + * use these bits: + * Legacy PA I/O (GSC/NIO): 5 bits (architected EIM register) + * V-class (EPIC): 6 bits + * N/L/A-class (iosapic): 8 bits + * PCI 2.2 MSI: 16 bits + * Some PCI devices: 32 bits (Symbios SCSI/ATM/HyperFabric) + * + * On the service provider side: + * o PA 1.1 (and PA2.0 narrow mode) 5-bits (width of EIR register) + * o PA 2.0 wide mode 6-bits (per processor) + * o IA64 8-bits (0-256 total) + * + * So a Legacy PA I/O device on a PA 2.0 box can't use all the bits supported + * by the processor...and the N/L-class I/O subsystem supports more bits than + * PA2.0 has. The first case is the problem. + */ +int txn_alloc_irq(unsigned int bits_wide) +{ + int irq; + + /* never return irq 0 cause that's the interval timer */ + for (irq = CPU_IRQ_BASE + 1; irq <= CPU_IRQ_MAX; irq++) { + if (cpu_claim_irq(irq, NULL, NULL) < 0) + continue; + if ((irq - CPU_IRQ_BASE) >= (1 << bits_wide)) + continue; + return irq; + } + + /* unlikely, but be prepared */ + return -1; +} + +unsigned long txn_alloc_addr(unsigned int virt_irq) +{ + static int next_cpu = -1; + + next_cpu++; /* assign to "next" CPU we want this bugger on */ + + /* validate entry */ + while ((next_cpu < NR_CPUS) && (!cpu_data[next_cpu].txn_addr || + !cpu_online(next_cpu))) + next_cpu++; + + if (next_cpu >= NR_CPUS) + next_cpu = 0; /* nothing else, assign monarch */ + + return cpu_data[next_cpu].txn_addr; +} + + +unsigned int txn_alloc_data(unsigned int virt_irq) +{ + return virt_irq - CPU_IRQ_BASE; +} + +/* ONLY called from entry.S:intr_extint() */ +void do_cpu_irq_mask(struct pt_regs *regs) +{ + unsigned long eirr_val; + + irq_enter(); + + /* + * Only allow interrupt processing to be interrupted by the + * timer tick + */ + set_eiem(EIEM_MASK(TIMER_IRQ)); + + /* 1) only process IRQs that are enabled/unmasked (cpu_eiem) + * 2) We loop here on EIRR contents in order to avoid + * nested interrupts or having to take another interrupt + * when we could have just handled it right away. + */ + for (;;) { + unsigned long bit = (1UL << (BITS_PER_LONG - 1)); + unsigned int irq; + eirr_val = mfctl(23) & cpu_eiem; + if (!eirr_val) + break; + + if (eirr_val & EIEM_MASK(TIMER_IRQ)) + set_eiem(0); + + mtctl(eirr_val, 23); /* reset bits we are going to process */ + + /* Work our way from MSb to LSb...same order we alloc EIRs */ + for (irq = TIMER_IRQ; eirr_val && bit; bit>>=1, irq++) { + if (!(bit & eirr_val)) + continue; + + /* clear bit in mask - can exit loop sooner */ + eirr_val &= ~bit; + + __do_IRQ(irq, regs); + } + } + set_eiem(cpu_eiem); + irq_exit(); +} + + +static struct irqaction timer_action = { + .handler = timer_interrupt, + .name = "timer", +}; + +#ifdef CONFIG_SMP +static struct irqaction ipi_action = { + .handler = ipi_interrupt, + .name = "IPI", +}; +#endif + +static void claim_cpu_irqs(void) +{ + int i; + for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) { + irq_desc[i].handler = &cpu_interrupt_type; + } + + irq_desc[TIMER_IRQ].action = &timer_action; + irq_desc[TIMER_IRQ].status |= IRQ_PER_CPU; +#ifdef CONFIG_SMP + irq_desc[IPI_IRQ].action = &ipi_action; + irq_desc[IPI_IRQ].status = IRQ_PER_CPU; +#endif +} + +void __init init_IRQ(void) +{ + local_irq_disable(); /* PARANOID - should already be disabled */ + mtctl(~0UL, 23); /* EIRR : clear all pending external intr */ + claim_cpu_irqs(); +#ifdef CONFIG_SMP + if (!cpu_eiem) + cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ); +#else + cpu_eiem = EIEM_MASK(TIMER_IRQ); +#endif + set_eiem(cpu_eiem); /* EIEM : enable all external intr */ + +} + +void hw_resend_irq(struct hw_interrupt_type *type, unsigned int irq) +{ + /* XXX: Needs to be written. We managed without it so far, but + * we really ought to write it. + */ +} + +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ %d\n", irq); +} diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c new file mode 100644 index 000000000000..f27cfe4771b8 --- /dev/null +++ b/arch/parisc/kernel/module.c @@ -0,0 +1,822 @@ +/* Kernel dynamically loadable module help for PARISC. + * + * The best reference for this stuff is probably the Processor- + * Specific ELF Supplement for PA-RISC: + * http://ftp.parisc-linux.org/docs/arch/elf-pa-hp.pdf + * + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * Copyright (C) 2003 Randolph Chung + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Notes: + * - SEGREL32 handling + * We are not doing SEGREL32 handling correctly. According to the ABI, we + * should do a value offset, like this: + * if (is_init(me, (void *)val)) + * val -= (uint32_t)me->module_init; + * else + * val -= (uint32_t)me->module_core; + * However, SEGREL32 is used only for PARISC unwind entries, and we want + * those entries to have an absolute address, and not just an offset. + * + * The unwind table mechanism has the ability to specify an offset for + * the unwind table; however, because we split off the init functions into + * a different piece of memory, it is not possible to do this using a + * single offset. Instead, we use the above hack for now. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt...) +#endif + +#define CHECK_RELOC(val, bits) \ + if ( ( !((val) & (1<<((bits)-1))) && ((val)>>(bits)) != 0 ) || \ + ( ((val) & (1<<((bits)-1))) && ((val)>>(bits)) != (((__typeof__(val))(~0))>>((bits)+2)))) { \ + printk(KERN_ERR "module %s relocation of symbol %s is out of range (0x%lx in %d bits)\n", \ + me->name, strtab + sym->st_name, (unsigned long)val, bits); \ + return -ENOEXEC; \ + } + +/* Maximum number of GOT entries. We use a long displacement ldd from + * the bottom of the table, which has a maximum signed displacement of + * 0x3fff; however, since we're only going forward, this becomes + * 0x1fff, and thus, since each GOT entry is 8 bytes long we can have + * at most 1023 entries */ +#define MAX_GOTS 1023 + +/* three functions to determine where in the module core + * or init pieces the location is */ +static inline int is_init(struct module *me, void *loc) +{ + return (loc >= me->module_init && + loc <= (me->module_init + me->init_size)); +} + +static inline int is_core(struct module *me, void *loc) +{ + return (loc >= me->module_core && + loc <= (me->module_core + me->core_size)); +} + +static inline int is_local(struct module *me, void *loc) +{ + return is_init(me, loc) || is_core(me, loc); +} + + +#ifndef __LP64__ +struct got_entry { + Elf32_Addr addr; +}; + +#define Elf_Fdesc Elf32_Fdesc + +struct stub_entry { + Elf32_Word insns[2]; /* each stub entry has two insns */ +}; +#else +struct got_entry { + Elf64_Addr addr; +}; + +#define Elf_Fdesc Elf64_Fdesc + +struct stub_entry { + Elf64_Word insns[4]; /* each stub entry has four insns */ +}; +#endif + +/* Field selection types defined by hppa */ +#define rnd(x) (((x)+0x1000)&~0x1fff) +/* fsel: full 32 bits */ +#define fsel(v,a) ((v)+(a)) +/* lsel: select left 21 bits */ +#define lsel(v,a) (((v)+(a))>>11) +/* rsel: select right 11 bits */ +#define rsel(v,a) (((v)+(a))&0x7ff) +/* lrsel with rounding of addend to nearest 8k */ +#define lrsel(v,a) (((v)+rnd(a))>>11) +/* rrsel with rounding of addend to nearest 8k */ +#define rrsel(v,a) ((((v)+rnd(a))&0x7ff)+((a)-rnd(a))) + +#define mask(x,sz) ((x) & ~((1<<(sz))-1)) + + +/* The reassemble_* functions prepare an immediate value for + insertion into an opcode. pa-risc uses all sorts of weird bitfields + in the instruction to hold the value. */ +static inline int reassemble_14(int as14) +{ + return (((as14 & 0x1fff) << 1) | + ((as14 & 0x2000) >> 13)); +} + +static inline int reassemble_17(int as17) +{ + return (((as17 & 0x10000) >> 16) | + ((as17 & 0x0f800) << 5) | + ((as17 & 0x00400) >> 8) | + ((as17 & 0x003ff) << 3)); +} + +static inline int reassemble_21(int as21) +{ + return (((as21 & 0x100000) >> 20) | + ((as21 & 0x0ffe00) >> 8) | + ((as21 & 0x000180) << 7) | + ((as21 & 0x00007c) << 14) | + ((as21 & 0x000003) << 12)); +} + +static inline int reassemble_22(int as22) +{ + return (((as22 & 0x200000) >> 21) | + ((as22 & 0x1f0000) << 5) | + ((as22 & 0x00f800) << 5) | + ((as22 & 0x000400) >> 8) | + ((as22 & 0x0003ff) << 3)); +} + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + +#ifndef __LP64__ +static inline unsigned long count_gots(const Elf_Rela *rela, unsigned long n) +{ + return 0; +} + +static inline unsigned long count_fdescs(const Elf_Rela *rela, unsigned long n) +{ + return 0; +} + +static inline unsigned long count_stubs(const Elf_Rela *rela, unsigned long n) +{ + unsigned long cnt = 0; + + for (; n > 0; n--, rela++) + { + switch (ELF32_R_TYPE(rela->r_info)) { + case R_PARISC_PCREL17F: + case R_PARISC_PCREL22F: + cnt++; + } + } + + return cnt; +} +#else +static inline unsigned long count_gots(const Elf_Rela *rela, unsigned long n) +{ + unsigned long cnt = 0; + + for (; n > 0; n--, rela++) + { + switch (ELF64_R_TYPE(rela->r_info)) { + case R_PARISC_LTOFF21L: + case R_PARISC_LTOFF14R: + case R_PARISC_PCREL22F: + cnt++; + } + } + + return cnt; +} + +static inline unsigned long count_fdescs(const Elf_Rela *rela, unsigned long n) +{ + unsigned long cnt = 0; + + for (; n > 0; n--, rela++) + { + switch (ELF64_R_TYPE(rela->r_info)) { + case R_PARISC_FPTR64: + cnt++; + } + } + + return cnt; +} + +static inline unsigned long count_stubs(const Elf_Rela *rela, unsigned long n) +{ + unsigned long cnt = 0; + + for (; n > 0; n--, rela++) + { + switch (ELF64_R_TYPE(rela->r_info)) { + case R_PARISC_PCREL22F: + cnt++; + } + } + + return cnt; +} +#endif + + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +#define CONST +int module_frob_arch_sections(CONST Elf_Ehdr *hdr, + CONST Elf_Shdr *sechdrs, + CONST char *secstrings, + struct module *me) +{ + unsigned long gots = 0, fdescs = 0, stubs = 0, init_stubs = 0; + unsigned int i; + + for (i = 1; i < hdr->e_shnum; i++) { + const Elf_Rela *rels = (void *)hdr + sechdrs[i].sh_offset; + unsigned long nrels = sechdrs[i].sh_size / sizeof(*rels); + + if (strncmp(secstrings + sechdrs[i].sh_name, + ".PARISC.unwind", 14) == 0) + me->arch.unwind_section = i; + + if (sechdrs[i].sh_type != SHT_RELA) + continue; + + /* some of these are not relevant for 32-bit/64-bit + * we leave them here to make the code common. the + * compiler will do its thing and optimize out the + * stuff we don't need + */ + gots += count_gots(rels, nrels); + fdescs += count_fdescs(rels, nrels); + if(strncmp(secstrings + sechdrs[i].sh_name, + ".rela.init", 10) == 0) + init_stubs += count_stubs(rels, nrels); + else + stubs += count_stubs(rels, nrels); + } + + /* align things a bit */ + me->core_size = ALIGN(me->core_size, 16); + me->arch.got_offset = me->core_size; + me->core_size += gots * sizeof(struct got_entry); + + me->core_size = ALIGN(me->core_size, 16); + me->arch.fdesc_offset = me->core_size; + me->core_size += fdescs * sizeof(Elf_Fdesc); + + me->core_size = ALIGN(me->core_size, 16); + me->arch.stub_offset = me->core_size; + me->core_size += stubs * sizeof(struct stub_entry); + + me->init_size = ALIGN(me->init_size, 16); + me->arch.init_stub_offset = me->init_size; + me->init_size += init_stubs * sizeof(struct stub_entry); + + me->arch.got_max = gots; + me->arch.fdesc_max = fdescs; + me->arch.stub_max = stubs; + me->arch.init_stub_max = init_stubs; + + return 0; +} + +#ifdef __LP64__ +static Elf64_Word get_got(struct module *me, unsigned long value, long addend) +{ + unsigned int i; + struct got_entry *got; + + value += addend; + + BUG_ON(value == 0); + + got = me->module_core + me->arch.got_offset; + for (i = 0; got[i].addr; i++) + if (got[i].addr == value) + goto out; + + BUG_ON(++me->arch.got_count > me->arch.got_max); + + got[i].addr = value; + out: + DEBUGP("GOT ENTRY %d[%x] val %lx\n", i, i*sizeof(struct got_entry), + value); + return i * sizeof(struct got_entry); +} +#endif /* __LP64__ */ + +#ifdef __LP64__ +static Elf_Addr get_fdesc(struct module *me, unsigned long value) +{ + Elf_Fdesc *fdesc = me->module_core + me->arch.fdesc_offset; + + if (!value) { + printk(KERN_ERR "%s: zero OPD requested!\n", me->name); + return 0; + } + + /* Look for existing fdesc entry. */ + while (fdesc->addr) { + if (fdesc->addr == value) + return (Elf_Addr)fdesc; + fdesc++; + } + + BUG_ON(++me->arch.fdesc_count > me->arch.fdesc_max); + + /* Create new one */ + fdesc->addr = value; + fdesc->gp = (Elf_Addr)me->module_core + me->arch.got_offset; + return (Elf_Addr)fdesc; +} +#endif /* __LP64__ */ + +static Elf_Addr get_stub(struct module *me, unsigned long value, long addend, + int millicode, int init_section) +{ + unsigned long i; + struct stub_entry *stub; + + if(init_section) { + i = me->arch.init_stub_count++; + BUG_ON(me->arch.init_stub_count > me->arch.init_stub_max); + stub = me->module_init + me->arch.init_stub_offset + + i * sizeof(struct stub_entry); + } else { + i = me->arch.stub_count++; + BUG_ON(me->arch.stub_count > me->arch.stub_max); + stub = me->module_core + me->arch.stub_offset + + i * sizeof(struct stub_entry); + } + +#ifndef __LP64__ +/* for 32-bit the stub looks like this: + * ldil L'XXX,%r1 + * be,n R'XXX(%sr4,%r1) + */ + //value = *(unsigned long *)((value + addend) & ~3); /* why? */ + + stub->insns[0] = 0x20200000; /* ldil L'XXX,%r1 */ + stub->insns[1] = 0xe0202002; /* be,n R'XXX(%sr4,%r1) */ + + stub->insns[0] |= reassemble_21(lrsel(value, addend)); + stub->insns[1] |= reassemble_17(rrsel(value, addend) / 4); + +#else +/* for 64-bit we have two kinds of stubs: + * for normal function calls: + * ldd 0(%dp),%dp + * ldd 10(%dp), %r1 + * bve (%r1) + * ldd 18(%dp), %dp + * + * for millicode: + * ldil 0, %r1 + * ldo 0(%r1), %r1 + * ldd 10(%r1), %r1 + * bve,n (%r1) + */ + if (!millicode) + { + stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */ + stub->insns[1] = 0x53610020; /* ldd 10(%dp),%r1 */ + stub->insns[2] = 0xe820d000; /* bve (%r1) */ + stub->insns[3] = 0x537b0030; /* ldd 18(%dp),%dp */ + + stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff); + } + else + { + stub->insns[0] = 0x20200000; /* ldil 0,%r1 */ + stub->insns[1] = 0x34210000; /* ldo 0(%r1), %r1 */ + stub->insns[2] = 0x50210020; /* ldd 10(%r1),%r1 */ + stub->insns[3] = 0xe820d002; /* bve,n (%r1) */ + + stub->insns[0] |= reassemble_21(lrsel(value, addend)); + stub->insns[1] |= reassemble_14(rrsel(value, addend)); + } +#endif + + return (Elf_Addr)stub; +} + +int apply_relocate(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + /* parisc should not need this ... */ + printk(KERN_ERR "module %s: RELOCATION unsupported\n", + me->name); + return -ENOEXEC; +} + +#ifndef __LP64__ +int apply_relocate_add(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + int i; + Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + Elf32_Word *loc; + Elf32_Addr val; + Elf32_Sword addend; + Elf32_Addr dot; + //unsigned long dp = (unsigned long)$global$; + register unsigned long dp asm ("r27"); + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + if (!sym->st_value) { + printk(KERN_WARNING "%s: Unknown symbol %s\n", + me->name, strtab + sym->st_name); + return -ENOENT; + } + //dot = (sechdrs[relsec].sh_addr + rel->r_offset) & ~0x03; + dot = (Elf32_Addr)loc & ~0x03; + + val = sym->st_value; + addend = rel[i].r_addend; + +#if 0 +#define r(t) ELF32_R_TYPE(rel[i].r_info)==t ? #t : + DEBUGP("Symbol %s loc 0x%x val 0x%x addend 0x%x: %s\n", + strtab + sym->st_name, + (uint32_t)loc, val, addend, + r(R_PARISC_PLABEL32) + r(R_PARISC_DIR32) + r(R_PARISC_DIR21L) + r(R_PARISC_DIR14R) + r(R_PARISC_SEGREL32) + r(R_PARISC_DPREL21L) + r(R_PARISC_DPREL14R) + r(R_PARISC_PCREL17F) + r(R_PARISC_PCREL22F) + "UNKNOWN"); +#undef r +#endif + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_PARISC_PLABEL32: + /* 32-bit function address */ + /* no function descriptors... */ + *loc = fsel(val, addend); + break; + case R_PARISC_DIR32: + /* direct 32-bit ref */ + *loc = fsel(val, addend); + break; + case R_PARISC_DIR21L: + /* left 21 bits of effective address */ + val = lrsel(val, addend); + *loc = mask(*loc, 21) | reassemble_21(val); + break; + case R_PARISC_DIR14R: + /* right 14 bits of effective address */ + val = rrsel(val, addend); + *loc = mask(*loc, 14) | reassemble_14(val); + break; + case R_PARISC_SEGREL32: + /* 32-bit segment relative address */ + /* See note about special handling of SEGREL32 at + * the beginning of this file. + */ + *loc = fsel(val, addend); + break; + case R_PARISC_DPREL21L: + /* left 21 bit of relative address */ + val = lrsel(val - dp, addend); + *loc = mask(*loc, 21) | reassemble_21(val); + break; + case R_PARISC_DPREL14R: + /* right 14 bit of relative address */ + val = rrsel(val - dp, addend); + *loc = mask(*loc, 14) | reassemble_14(val); + break; + case R_PARISC_PCREL17F: + /* 17-bit PC relative address */ + val = get_stub(me, val, addend, 0, is_init(me, loc)); + val = (val - dot - 8)/4; + CHECK_RELOC(val, 17) + *loc = (*loc & ~0x1f1ffd) | reassemble_17(val); + break; + case R_PARISC_PCREL22F: + /* 22-bit PC relative address; only defined for pa20 */ + val = get_stub(me, val, addend, 0, is_init(me, loc)); + DEBUGP("STUB FOR %s loc %lx+%lx at %lx\n", + strtab + sym->st_name, (unsigned long)loc, addend, + val) + val = (val - dot - 8)/4; + CHECK_RELOC(val, 22); + *loc = (*loc & ~0x3ff1ffd) | reassemble_22(val); + break; + + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + + return 0; +} + +#else +int apply_relocate_add(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + int i; + Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf64_Sym *sym; + Elf64_Word *loc; + Elf64_Xword *loc64; + Elf64_Addr val; + Elf64_Sxword addend; + Elf64_Addr dot; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + + ELF64_R_SYM(rel[i].r_info); + if (!sym->st_value) { + printk(KERN_WARNING "%s: Unknown symbol %s\n", + me->name, strtab + sym->st_name); + return -ENOENT; + } + //dot = (sechdrs[relsec].sh_addr + rel->r_offset) & ~0x03; + dot = (Elf64_Addr)loc & ~0x03; + loc64 = (Elf64_Xword *)loc; + + val = sym->st_value; + addend = rel[i].r_addend; + +#if 0 +#define r(t) ELF64_R_TYPE(rel[i].r_info)==t ? #t : + printk("Symbol %s loc %p val 0x%Lx addend 0x%Lx: %s\n", + strtab + sym->st_name, + loc, val, addend, + r(R_PARISC_LTOFF14R) + r(R_PARISC_LTOFF21L) + r(R_PARISC_PCREL22F) + r(R_PARISC_DIR64) + r(R_PARISC_SEGREL32) + r(R_PARISC_FPTR64) + "UNKNOWN"); +#undef r +#endif + + switch (ELF64_R_TYPE(rel[i].r_info)) { + case R_PARISC_LTOFF21L: + /* LT-relative; left 21 bits */ + val = get_got(me, val, addend); + DEBUGP("LTOFF21L Symbol %s loc %p val %lx\n", + strtab + sym->st_name, + loc, val); + val = lrsel(val, 0); + *loc = mask(*loc, 21) | reassemble_21(val); + break; + case R_PARISC_LTOFF14R: + /* L(ltoff(val+addend)) */ + /* LT-relative; right 14 bits */ + val = get_got(me, val, addend); + val = rrsel(val, 0); + DEBUGP("LTOFF14R Symbol %s loc %p val %lx\n", + strtab + sym->st_name, + loc, val); + *loc = mask(*loc, 14) | reassemble_14(val); + break; + case R_PARISC_PCREL22F: + /* PC-relative; 22 bits */ + DEBUGP("PCREL22F Symbol %s loc %p val %lx\n", + strtab + sym->st_name, + loc, val); + /* can we reach it locally? */ + if(!is_local(me, (void *)val)) { + if (strncmp(strtab + sym->st_name, "$$", 2) + == 0) + val = get_stub(me, val, addend, 1, + is_init(me, loc)); + else + val = get_stub(me, val, addend, 0, + is_init(me, loc)); + } + DEBUGP("STUB FOR %s loc %lx, val %lx+%lx at %lx\n", + strtab + sym->st_name, loc, sym->st_value, + addend, val); + /* FIXME: local symbols work as long as the + * core and init pieces aren't separated too + * far. If this is ever broken, you will trip + * the check below. The way to fix it would + * be to generate local stubs to go between init + * and core */ + if((Elf64_Sxword)(val - dot - 8) > 0x800000 -1 || + (Elf64_Sxword)(val - dot - 8) < -0x800000) { + printk(KERN_ERR "Module %s, symbol %s is out of range for PCREL22F relocation\n", + me->name, strtab + sym->st_name); + return -ENOEXEC; + } + val = (val - dot - 8)/4; + *loc = (*loc & ~0x3ff1ffd) | reassemble_22(val); + break; + case R_PARISC_DIR64: + /* 64-bit effective address */ + *loc64 = val + addend; + break; + case R_PARISC_SEGREL32: + /* 32-bit segment relative address */ + /* See note about special handling of SEGREL32 at + * the beginning of this file. + */ + *loc = fsel(val, addend); + break; + case R_PARISC_FPTR64: + /* 64-bit function address */ + if(is_local(me, (void *)(val + addend))) { + *loc64 = get_fdesc(me, val+addend); + DEBUGP("FDESC for %s at %p points to %lx\n", + strtab + sym->st_name, *loc64, + ((Elf_Fdesc *)*loc64)->addr); + } else { + /* if the symbol is not local to this + * module then val+addend is a pointer + * to the function descriptor */ + DEBUGP("Non local FPTR64 Symbol %s loc %p val %lx\n", + strtab + sym->st_name, + loc, val); + *loc64 = val + addend; + } + break; + + default: + printk(KERN_ERR "module %s: Unknown relocation: %Lu\n", + me->name, ELF64_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} +#endif + +static void +register_unwind_table(struct module *me, + const Elf_Shdr *sechdrs) +{ + unsigned char *table, *end; + unsigned long gp; + + if (!me->arch.unwind_section) + return; + + table = (unsigned char *)sechdrs[me->arch.unwind_section].sh_addr; + end = table + sechdrs[me->arch.unwind_section].sh_size; + gp = (Elf_Addr)me->module_core + me->arch.got_offset; + + DEBUGP("register_unwind_table(), sect = %d at 0x%p - 0x%p (gp=0x%lx)\n", + me->arch.unwind_section, table, end, gp); + me->arch.unwind = unwind_table_add(me->name, 0, gp, table, end); +} + +static void +deregister_unwind_table(struct module *me) +{ + if (me->arch.unwind) + unwind_table_remove(me->arch.unwind); +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + int i; + unsigned long nsyms; + const char *strtab = NULL; + Elf_Sym *newptr, *oldptr; + Elf_Shdr *symhdr = NULL; +#ifdef DEBUG + Elf_Fdesc *entry; + u32 *addr; + + entry = (Elf_Fdesc *)me->init; + printk("FINALIZE, ->init FPTR is %p, GP %lx ADDR %lx\n", entry, + entry->gp, entry->addr); + addr = (u32 *)entry->addr; + printk("INSNS: %x %x %x %x\n", + addr[0], addr[1], addr[2], addr[3]); + printk("stubs used %ld, stubs max %ld\n" + "init_stubs used %ld, init stubs max %ld\n" + "got entries used %ld, gots max %ld\n" + "fdescs used %ld, fdescs max %ld\n", + me->arch.stub_count, me->arch.stub_max, + me->arch.init_stub_count, me->arch.init_stub_max, + me->arch.got_count, me->arch.got_max, + me->arch.fdesc_count, me->arch.fdesc_max); +#endif + + register_unwind_table(me, sechdrs); + + /* haven't filled in me->symtab yet, so have to find it + * ourselves */ + for (i = 1; i < hdr->e_shnum; i++) { + if(sechdrs[i].sh_type == SHT_SYMTAB + && (sechdrs[i].sh_type & SHF_ALLOC)) { + int strindex = sechdrs[i].sh_link; + /* FIXME: AWFUL HACK + * The cast is to drop the const from + * the sechdrs pointer */ + symhdr = (Elf_Shdr *)&sechdrs[i]; + strtab = (char *)sechdrs[strindex].sh_addr; + break; + } + } + + DEBUGP("module %s: strtab %p, symhdr %p\n", + me->name, strtab, symhdr); + + if(me->arch.got_count > MAX_GOTS) { + printk(KERN_ERR "%s: Global Offset Table overflow (used %ld, allowed %d\n", me->name, me->arch.got_count, MAX_GOTS); + return -EINVAL; + } + + /* no symbol table */ + if(symhdr == NULL) + return 0; + + oldptr = (void *)symhdr->sh_addr; + newptr = oldptr + 1; /* we start counting at 1 */ + nsyms = symhdr->sh_size / sizeof(Elf_Sym); + DEBUGP("OLD num_symtab %lu\n", nsyms); + + for (i = 1; i < nsyms; i++) { + oldptr++; /* note, count starts at 1 so preincrement */ + if(strncmp(strtab + oldptr->st_name, + ".L", 2) == 0) + continue; + + if(newptr != oldptr) + *newptr++ = *oldptr; + else + newptr++; + + } + nsyms = newptr - (Elf_Sym *)symhdr->sh_addr; + DEBUGP("NEW num_symtab %lu\n", nsyms); + symhdr->sh_size = nsyms * sizeof(Elf_Sym); + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + deregister_unwind_table(mod); +} diff --git a/arch/parisc/kernel/pa7300lc.c b/arch/parisc/kernel/pa7300lc.c new file mode 100644 index 000000000000..8a89780223aa --- /dev/null +++ b/arch/parisc/kernel/pa7300lc.c @@ -0,0 +1,49 @@ +/* + * linux/arch/parisc/kernel/pa7300lc.c + * - PA7300LC-specific functions + * + * Copyright (C) 2000 Philipp Rumpf */ + +#include +#include +#include +#include +#include +#include + +/* CPU register indices */ + +#define MIOC_STATUS 0xf040 +#define MIOC_CONTROL 0xf080 +#define MDERRADD 0xf0e0 +#define DMAERR 0xf0e8 +#define DIOERR 0xf0ec +#define HIDMAMEM 0xf0f4 + +/* this returns the HPA of the CPU it was called on */ +static u32 cpu_hpa(void) +{ + return 0xfffb0000; +} + +static void pa7300lc_lpmc(int code, struct pt_regs *regs) +{ + u32 hpa; + printk(KERN_WARNING "LPMC on CPU %d\n", smp_processor_id()); + + show_regs(regs); + + hpa = cpu_hpa(); + printk(KERN_WARNING + "MIOC_CONTROL %08x\n" "MIOC_STATUS %08x\n" + "MDERRADD %08x\n" "DMAERR %08x\n" + "DIOERR %08x\n" "HIDMAMEM %08x\n", + gsc_readl(hpa+MIOC_CONTROL), gsc_readl(hpa+MIOC_STATUS), + gsc_readl(hpa+MDERRADD), gsc_readl(hpa+DMAERR), + gsc_readl(hpa+DIOERR), gsc_readl(hpa+HIDMAMEM)); +} + +void pa7300lc_init(void) +{ + cpu_lpmc = pa7300lc_lpmc; +} diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S new file mode 100644 index 000000000000..77e03bc0f935 --- /dev/null +++ b/arch/parisc/kernel/pacache.S @@ -0,0 +1,1086 @@ +/* + * PARISC TLB and cache flushing support + * Copyright (C) 2000-2001 Hewlett-Packard (John Marvin) + * Copyright (C) 2001 Matthew Wilcox (willy at parisc-linux.org) + * Copyright (C) 2002 Richard Hirst (rhirst with parisc-linux.org) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * NOTE: fdc,fic, and pdc instructions that use base register modification + * should only use index and base registers that are not shadowed, + * so that the fast path emulation in the non access miss handler + * can be used. + */ + +#ifdef __LP64__ +#define ADDIB addib,* +#define CMPB cmpb,* +#define ANDCM andcm,* + + .level 2.0w +#else +#define ADDIB addib, +#define CMPB cmpb, +#define ANDCM andcm + + .level 2.0 +#endif + +#include +#include +#include +#include + + .text + .align 128 + + .export flush_tlb_all_local,code + +flush_tlb_all_local: + .proc + .callinfo NO_CALLS + .entry + + /* + * The pitlbe and pdtlbe instructions should only be used to + * flush the entire tlb. Also, there needs to be no intervening + * tlb operations, e.g. tlb misses, so the operation needs + * to happen in real mode with all interruptions disabled. + */ + + /* + * Once again, we do the rfi dance ... some day we need examine + * all of our uses of this type of code and see what can be + * consolidated. + */ + + rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */ + nop + nop + nop + nop + nop + nop + nop + + rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */ + ldil L%REAL_MODE_PSW, %r1 + ldo R%REAL_MODE_PSW(%r1), %r1 + mtctl %r1, %cr22 + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + ldil L%PA(1f), %r1 + ldo R%PA(1f)(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + rfi + nop + +1: ldil L%PA(cache_info), %r1 + ldo R%PA(cache_info)(%r1), %r1 + + /* Flush Instruction Tlb */ + + LDREG ITLB_SID_BASE(%r1), %r20 + LDREG ITLB_SID_STRIDE(%r1), %r21 + LDREG ITLB_SID_COUNT(%r1), %r22 + LDREG ITLB_OFF_BASE(%r1), %arg0 + LDREG ITLB_OFF_STRIDE(%r1), %arg1 + LDREG ITLB_OFF_COUNT(%r1), %arg2 + LDREG ITLB_LOOP(%r1), %arg3 + + ADDIB= -1, %arg3, fitoneloop /* Preadjust and test */ + movb,<,n %arg3, %r31, fitdone /* If loop < 0, skip */ + copy %arg0, %r28 /* Init base addr */ + +fitmanyloop: /* Loop if LOOP >= 2 */ + mtsp %r20, %sr1 + add %r21, %r20, %r20 /* increment space */ + copy %arg2, %r29 /* Init middle loop count */ + +fitmanymiddle: /* Loop if LOOP >= 2 */ + ADDIB> -1, %r31, fitmanymiddle /* Adjusted inner loop decr */ + pitlbe 0(%sr1, %r28) + pitlbe,m %arg1(%sr1, %r28) /* Last pitlbe and addr adjust */ + ADDIB> -1, %r29, fitmanymiddle /* Middle loop decr */ + copy %arg3, %r31 /* Re-init inner loop count */ + + movb,tr %arg0, %r28, fitmanyloop /* Re-init base addr */ + ADDIB<=,n -1, %r22, fitdone /* Outer loop count decr */ + +fitoneloop: /* Loop if LOOP = 1 */ + mtsp %r20, %sr1 + copy %arg0, %r28 /* init base addr */ + copy %arg2, %r29 /* init middle loop count */ + +fitonemiddle: /* Loop if LOOP = 1 */ + ADDIB> -1, %r29, fitonemiddle /* Middle loop count decr */ + pitlbe,m %arg1(%sr1, %r28) /* pitlbe for one loop */ + + ADDIB> -1, %r22, fitoneloop /* Outer loop count decr */ + add %r21, %r20, %r20 /* increment space */ + +fitdone: + + /* Flush Data Tlb */ + + LDREG DTLB_SID_BASE(%r1), %r20 + LDREG DTLB_SID_STRIDE(%r1), %r21 + LDREG DTLB_SID_COUNT(%r1), %r22 + LDREG DTLB_OFF_BASE(%r1), %arg0 + LDREG DTLB_OFF_STRIDE(%r1), %arg1 + LDREG DTLB_OFF_COUNT(%r1), %arg2 + LDREG DTLB_LOOP(%r1), %arg3 + + ADDIB= -1, %arg3, fdtoneloop /* Preadjust and test */ + movb,<,n %arg3, %r31, fdtdone /* If loop < 0, skip */ + copy %arg0, %r28 /* Init base addr */ + +fdtmanyloop: /* Loop if LOOP >= 2 */ + mtsp %r20, %sr1 + add %r21, %r20, %r20 /* increment space */ + copy %arg2, %r29 /* Init middle loop count */ + +fdtmanymiddle: /* Loop if LOOP >= 2 */ + ADDIB> -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */ + pdtlbe 0(%sr1, %r28) + pdtlbe,m %arg1(%sr1, %r28) /* Last pdtlbe and addr adjust */ + ADDIB> -1, %r29, fdtmanymiddle /* Middle loop decr */ + copy %arg3, %r31 /* Re-init inner loop count */ + + movb,tr %arg0, %r28, fdtmanyloop /* Re-init base addr */ + ADDIB<=,n -1, %r22,fdtdone /* Outer loop count decr */ + +fdtoneloop: /* Loop if LOOP = 1 */ + mtsp %r20, %sr1 + copy %arg0, %r28 /* init base addr */ + copy %arg2, %r29 /* init middle loop count */ + +fdtonemiddle: /* Loop if LOOP = 1 */ + ADDIB> -1, %r29, fdtonemiddle /* Middle loop count decr */ + pdtlbe,m %arg1(%sr1, %r28) /* pdtlbe for one loop */ + + ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */ + add %r21, %r20, %r20 /* increment space */ + +fdtdone: + + /* Switch back to virtual mode */ + + rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ + ldil L%KERNEL_PSW, %r1 + ldo R%KERNEL_PSW(%r1), %r1 + or %r1, %r19, %r1 /* Set I bit if set on entry */ + mtctl %r1, %cr22 + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + ldil L%(2f), %r1 + ldo R%(2f)(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + rfi + nop + +2: bv %r0(%r2) + nop + .exit + + .procend + + .export flush_instruction_cache_local,code + .import cache_info,data + +flush_instruction_cache_local: + .proc + .callinfo NO_CALLS + .entry + + mtsp %r0, %sr1 + ldil L%cache_info, %r1 + ldo R%cache_info(%r1), %r1 + + /* Flush Instruction Cache */ + + LDREG ICACHE_BASE(%r1), %arg0 + LDREG ICACHE_STRIDE(%r1), %arg1 + LDREG ICACHE_COUNT(%r1), %arg2 + LDREG ICACHE_LOOP(%r1), %arg3 + rsm PSW_SM_I, %r22 /* No mmgt ops during loop*/ + ADDIB= -1, %arg3, fioneloop /* Preadjust and test */ + movb,<,n %arg3, %r31, fisync /* If loop < 0, do sync */ + +fimanyloop: /* Loop if LOOP >= 2 */ + ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */ + fice 0(%sr1, %arg0) + fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */ + movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */ + ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */ + +fioneloop: /* Loop if LOOP = 1 */ + ADDIB> -1, %arg2, fioneloop /* Outer loop count decr */ + fice,m %arg1(%sr1, %arg0) /* Fice for one loop */ + +fisync: + sync + mtsm %r22 + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_data_cache_local, code + .import cache_info, data + +flush_data_cache_local: + .proc + .callinfo NO_CALLS + .entry + + mtsp %r0, %sr1 + ldil L%cache_info, %r1 + ldo R%cache_info(%r1), %r1 + + /* Flush Data Cache */ + + LDREG DCACHE_BASE(%r1), %arg0 + LDREG DCACHE_STRIDE(%r1), %arg1 + LDREG DCACHE_COUNT(%r1), %arg2 + LDREG DCACHE_LOOP(%r1), %arg3 + rsm PSW_SM_I, %r22 + ADDIB= -1, %arg3, fdoneloop /* Preadjust and test */ + movb,<,n %arg3, %r31, fdsync /* If loop < 0, do sync */ + +fdmanyloop: /* Loop if LOOP >= 2 */ + ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */ + fdce 0(%sr1, %arg0) + fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */ + movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */ + ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */ + +fdoneloop: /* Loop if LOOP = 1 */ + ADDIB> -1, %arg2, fdoneloop /* Outer loop count decr */ + fdce,m %arg1(%sr1, %arg0) /* Fdce for one loop */ + +fdsync: + syncdma + sync + mtsm %r22 + bv %r0(%r2) + nop + .exit + + .procend + + .export copy_user_page_asm,code + .align 16 + +copy_user_page_asm: + .proc + .callinfo NO_CALLS + .entry + +#ifdef __LP64__ + /* PA8x00 CPUs can consume 2 loads or 1 store per cycle. + * Unroll the loop by hand and arrange insn appropriately. + * GCC probably can do this just as well. + */ + + ldd 0(%r25), %r19 + ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */ + ldw 128(%r25), %r0 /* prefetch 2 */ + +1: ldd 8(%r25), %r20 + ldw 192(%r25), %r0 /* prefetch 3 */ + ldw 256(%r25), %r0 /* prefetch 4 */ + + ldd 16(%r25), %r21 + ldd 24(%r25), %r22 + std %r19, 0(%r26) + std %r20, 8(%r26) + + ldd 32(%r25), %r19 + ldd 40(%r25), %r20 + std %r21, 16(%r26) + std %r22, 24(%r26) + + ldd 48(%r25), %r21 + ldd 56(%r25), %r22 + std %r19, 32(%r26) + std %r20, 40(%r26) + + ldd 64(%r25), %r19 + ldd 72(%r25), %r20 + std %r21, 48(%r26) + std %r22, 56(%r26) + + ldd 80(%r25), %r21 + ldd 88(%r25), %r22 + std %r19, 64(%r26) + std %r20, 72(%r26) + + ldd 96(%r25), %r19 + ldd 104(%r25), %r20 + std %r21, 80(%r26) + std %r22, 88(%r26) + + ldd 112(%r25), %r21 + ldd 120(%r25), %r22 + std %r19, 96(%r26) + std %r20, 104(%r26) + + ldo 128(%r25), %r25 + std %r21, 112(%r26) + std %r22, 120(%r26) + ldo 128(%r26), %r26 + + ADDIB> -1, %r1, 1b /* bundle 10 */ + ldd 0(%r25), %r19 /* start next loads */ + +#else + + /* + * This loop is optimized for PCXL/PCXL2 ldw/ldw and stw/stw + * bundles (very restricted rules for bundling). + * Note that until (if) we start saving + * the full 64 bit register values on interrupt, we can't + * use ldd/std on a 32 bit kernel. + */ + ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + +1: + ldw 0(%r25), %r19 + ldw 4(%r25), %r20 + ldw 8(%r25), %r21 + ldw 12(%r25), %r22 + stw %r19, 0(%r26) + stw %r20, 4(%r26) + stw %r21, 8(%r26) + stw %r22, 12(%r26) + ldw 16(%r25), %r19 + ldw 20(%r25), %r20 + ldw 24(%r25), %r21 + ldw 28(%r25), %r22 + stw %r19, 16(%r26) + stw %r20, 20(%r26) + stw %r21, 24(%r26) + stw %r22, 28(%r26) + ldw 32(%r25), %r19 + ldw 36(%r25), %r20 + ldw 40(%r25), %r21 + ldw 44(%r25), %r22 + stw %r19, 32(%r26) + stw %r20, 36(%r26) + stw %r21, 40(%r26) + stw %r22, 44(%r26) + ldw 48(%r25), %r19 + ldw 52(%r25), %r20 + ldw 56(%r25), %r21 + ldw 60(%r25), %r22 + stw %r19, 48(%r26) + stw %r20, 52(%r26) + stw %r21, 56(%r26) + stw %r22, 60(%r26) + ldo 64(%r26), %r26 + ADDIB> -1, %r1, 1b + ldo 64(%r25), %r25 +#endif + bv %r0(%r2) + nop + .exit + + .procend + +/* + * NOTE: Code in clear_user_page has a hard coded dependency on the + * maximum alias boundary being 4 Mb. We've been assured by the + * parisc chip designers that there will not ever be a parisc + * chip with a larger alias boundary (Never say never :-) ). + * + * Subtle: the dtlb miss handlers support the temp alias region by + * "knowing" that if a dtlb miss happens within the temp alias + * region it must have occurred while in clear_user_page. Since + * this routine makes use of processor local translations, we + * don't want to insert them into the kernel page table. Instead, + * we load up some general registers (they need to be registers + * which aren't shadowed) with the physical page numbers (preshifted + * for tlb insertion) needed to insert the translations. When we + * miss on the translation, the dtlb miss handler inserts the + * translation into the tlb using these values: + * + * %r26 physical page (shifted for tlb insert) of "to" translation + * %r23 physical page (shifted for tlb insert) of "from" translation + */ + +#if 0 + + /* + * We can't do this since copy_user_page is used to bring in + * file data that might have instructions. Since the data would + * then need to be flushed out so the i-fetch can see it, it + * makes more sense to just copy through the kernel translation + * and flush it. + * + * I'm still keeping this around because it may be possible to + * use it if more information is passed into copy_user_page(). + * Have to do some measurements to see if it is worthwhile to + * lobby for such a change. + */ + + .export copy_user_page_asm,code + +copy_user_page_asm: + .proc + .callinfo NO_CALLS + .entry + + ldil L%(__PAGE_OFFSET), %r1 + sub %r26, %r1, %r26 + sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ + + ldil L%(TMPALIAS_MAP_START), %r28 +#ifdef __LP64__ + extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ + extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ + depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ + depdi 0, 63,12, %r28 /* Clear any offset bits */ + copy %r28, %r29 + depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ +#else + extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ + extrw,u %r23, 24,25, %r23 /* convert phys addr to tlb insert format */ + depw %r24, 31,22, %r28 /* Form aliased virtual address 'to' */ + depwi 0, 31,12, %r28 /* Clear any offset bits */ + copy %r28, %r29 + depwi 1, 9,1, %r29 /* Form aliased virtual address 'from' */ +#endif + + /* Purge any old translations */ + + pdtlb 0(%r28) + pdtlb 0(%r29) + + ldi 64, %r1 + + /* + * This loop is optimized for PCXL/PCXL2 ldw/ldw and stw/stw + * bundles (very restricted rules for bundling). It probably + * does OK on PCXU and better, but we could do better with + * ldd/std instructions. Note that until (if) we start saving + * the full 64 bit register values on interrupt, we can't + * use ldd/std on a 32 bit kernel. + */ + + +1: + ldw 0(%r29), %r19 + ldw 4(%r29), %r20 + ldw 8(%r29), %r21 + ldw 12(%r29), %r22 + stw %r19, 0(%r28) + stw %r20, 4(%r28) + stw %r21, 8(%r28) + stw %r22, 12(%r28) + ldw 16(%r29), %r19 + ldw 20(%r29), %r20 + ldw 24(%r29), %r21 + ldw 28(%r29), %r22 + stw %r19, 16(%r28) + stw %r20, 20(%r28) + stw %r21, 24(%r28) + stw %r22, 28(%r28) + ldw 32(%r29), %r19 + ldw 36(%r29), %r20 + ldw 40(%r29), %r21 + ldw 44(%r29), %r22 + stw %r19, 32(%r28) + stw %r20, 36(%r28) + stw %r21, 40(%r28) + stw %r22, 44(%r28) + ldw 48(%r29), %r19 + ldw 52(%r29), %r20 + ldw 56(%r29), %r21 + ldw 60(%r29), %r22 + stw %r19, 48(%r28) + stw %r20, 52(%r28) + stw %r21, 56(%r28) + stw %r22, 60(%r28) + ldo 64(%r28), %r28 + ADDIB> -1, %r1,1b + ldo 64(%r29), %r29 + + bv %r0(%r2) + nop + .exit + + .procend +#endif + + .export __clear_user_page_asm,code + +__clear_user_page_asm: + .proc + .callinfo NO_CALLS + .entry + + tophys_r1 %r26 + + ldil L%(TMPALIAS_MAP_START), %r28 +#ifdef __LP64__ +#if (TMPALIAS_MAP_START >= 0x80000000) + depdi 0, 31,32, %r28 /* clear any sign extension */ +#endif + extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ + depdi 0, 63,12, %r28 /* Clear any offset bits */ +#else + extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ + depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ + depwi 0, 31,12, %r28 /* Clear any offset bits */ +#endif + + /* Purge any old translation */ + + pdtlb 0(%r28) + +#ifdef __LP64__ + ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ + + /* PREFETCH (Write) has not (yet) been proven to help here */ +/* #define PREFETCHW_OP ldd 256(%0), %r0 */ + +1: std %r0, 0(%r28) + std %r0, 8(%r28) + std %r0, 16(%r28) + std %r0, 24(%r28) + std %r0, 32(%r28) + std %r0, 40(%r28) + std %r0, 48(%r28) + std %r0, 56(%r28) + std %r0, 64(%r28) + std %r0, 72(%r28) + std %r0, 80(%r28) + std %r0, 88(%r28) + std %r0, 96(%r28) + std %r0, 104(%r28) + std %r0, 112(%r28) + std %r0, 120(%r28) + ADDIB> -1, %r1, 1b + ldo 128(%r28), %r28 + +#else /* ! __LP64 */ + + ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ + +1: + stw %r0, 0(%r28) + stw %r0, 4(%r28) + stw %r0, 8(%r28) + stw %r0, 12(%r28) + stw %r0, 16(%r28) + stw %r0, 20(%r28) + stw %r0, 24(%r28) + stw %r0, 28(%r28) + stw %r0, 32(%r28) + stw %r0, 36(%r28) + stw %r0, 40(%r28) + stw %r0, 44(%r28) + stw %r0, 48(%r28) + stw %r0, 52(%r28) + stw %r0, 56(%r28) + stw %r0, 60(%r28) + ADDIB> -1, %r1, 1b + ldo 64(%r28), %r28 +#endif /* __LP64 */ + + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_kernel_dcache_page + +flush_kernel_dcache_page: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1, 63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r25 +#endif + add %r26, %r25, %r25 + sub %r25, %r23, %r25 + + +1: fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + CMPB<< %r26, %r25,1b + fdc,m %r23(%r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_user_dcache_page + +flush_user_dcache_page: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1,63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1,31-PAGE_SHIFT,1, %r25 +#endif + add %r26, %r25, %r25 + sub %r25, %r23, %r25 + + +1: fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + fdc,m %r23(%sr3, %r26) + CMPB<< %r26, %r25,1b + fdc,m %r23(%sr3, %r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_user_icache_page + +flush_user_icache_page: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1, 63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r25 +#endif + add %r26, %r25, %r25 + sub %r25, %r23, %r25 + + +1: fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + fic,m %r23(%sr3, %r26) + CMPB<< %r26, %r25,1b + fic,m %r23(%sr3, %r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + + .export purge_kernel_dcache_page + +purge_kernel_dcache_page: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1, 63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r25 +#endif + add %r26, %r25, %r25 + sub %r25, %r23, %r25 + +1: pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + pdc,m %r23(%r26) + CMPB<< %r26, %r25, 1b + pdc,m %r23(%r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + +#if 0 + /* Currently not used, but it still is a possible alternate + * solution. + */ + + .export flush_alias_page + +flush_alias_page: + .proc + .callinfo NO_CALLS + .entry + + tophys_r1 %r26 + + ldil L%(TMPALIAS_MAP_START), %r28 +#ifdef __LP64__ + extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ + depdi 0, 63,12, %r28 /* Clear any offset bits */ +#else + extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ + depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ + depwi 0, 31,12, %r28 /* Clear any offset bits */ +#endif + + /* Purge any old translation */ + + pdtlb 0(%r28) + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1, 63-PAGE_SHIFT,1, %r29 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r29 +#endif + add %r28, %r29, %r29 + sub %r29, %r23, %r29 + +1: fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + fdc,m %r23(%r28) + CMPB<< %r28, %r29, 1b + fdc,m %r23(%r28) + + sync + bv %r0(%r2) + nop + .exit + + .procend +#endif + + .export flush_user_dcache_range_asm + +flush_user_dcache_range_asm: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + ldo -1(%r23), %r21 + ANDCM %r26, %r21, %r26 + +1: CMPB<<,n %r26, %r25, 1b + fdc,m %r23(%sr3, %r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_kernel_dcache_range_asm + +flush_kernel_dcache_range_asm: + .proc + .callinfo NO_CALLS + .entry + + ldil L%dcache_stride, %r1 + ldw R%dcache_stride(%r1), %r23 + ldo -1(%r23), %r21 + ANDCM %r26, %r21, %r26 + +1: CMPB<<,n %r26, %r25,1b + fdc,m %r23(%r26) + + sync + syncdma + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_user_icache_range_asm + +flush_user_icache_range_asm: + .proc + .callinfo NO_CALLS + .entry + + ldil L%icache_stride, %r1 + ldw R%icache_stride(%r1), %r23 + ldo -1(%r23), %r21 + ANDCM %r26, %r21, %r26 + +1: CMPB<<,n %r26, %r25,1b + fic,m %r23(%sr3, %r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_kernel_icache_page + +flush_kernel_icache_page: + .proc + .callinfo NO_CALLS + .entry + + ldil L%icache_stride, %r1 + ldw R%icache_stride(%r1), %r23 + +#ifdef __LP64__ + depdi,z 1, 63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r25 +#endif + add %r26, %r25, %r25 + sub %r25, %r23, %r25 + + +1: fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + fic,m %r23(%r26) + CMPB<< %r26, %r25, 1b + fic,m %r23(%r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .export flush_kernel_icache_range_asm + +flush_kernel_icache_range_asm: + .proc + .callinfo NO_CALLS + .entry + + ldil L%icache_stride, %r1 + ldw R%icache_stride(%r1), %r23 + ldo -1(%r23), %r21 + ANDCM %r26, %r21, %r26 + +1: CMPB<<,n %r26, %r25, 1b + fic,m %r23(%r26) + + sync + bv %r0(%r2) + nop + .exit + + .procend + + .align 128 + + .export disable_sr_hashing_asm,code + +disable_sr_hashing_asm: + .proc + .callinfo NO_CALLS + .entry + + /* Switch to real mode */ + + ssm 0, %r0 /* relied upon translation! */ + nop + nop + nop + nop + nop + nop + nop + + rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */ + ldil L%REAL_MODE_PSW, %r1 + ldo R%REAL_MODE_PSW(%r1), %r1 + mtctl %r1, %cr22 + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + ldil L%PA(1f), %r1 + ldo R%PA(1f)(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + rfi + nop + +1: cmpib,=,n SRHASH_PCXST, %r26,srdis_pcxs + cmpib,=,n SRHASH_PCXL, %r26,srdis_pcxl + cmpib,=,n SRHASH_PA20, %r26,srdis_pa20 + b,n srdis_done + +srdis_pcxs: + + /* Disable Space Register Hashing for PCXS,PCXT,PCXT' */ + + .word 0x141c1a00 /* mfdiag %dr0, %r28 */ + .word 0x141c1a00 /* must issue twice */ + depwi 0,18,1, %r28 /* Clear DHE (dcache hash enable) */ + depwi 0,20,1, %r28 /* Clear IHE (icache hash enable) */ + .word 0x141c1600 /* mtdiag %r28, %dr0 */ + .word 0x141c1600 /* must issue twice */ + b,n srdis_done + +srdis_pcxl: + + /* Disable Space Register Hashing for PCXL */ + + .word 0x141c0600 /* mfdiag %dr0, %r28 */ + depwi 0,28,2, %r28 /* Clear DHASH_EN & IHASH_EN */ + .word 0x141c0240 /* mtdiag %r28, %dr0 */ + b,n srdis_done + +srdis_pa20: + + /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */ + + .word 0x144008bc /* mfdiag %dr2, %r28 */ + depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */ + .word 0x145c1840 /* mtdiag %r28, %dr2 */ + +srdis_done: + + /* Switch back to virtual mode */ + + rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ + ldil L%KERNEL_PSW, %r1 + ldo R%KERNEL_PSW(%r1), %r1 + mtctl %r1, %cr22 + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + ldil L%(2f), %r1 + ldo R%(2f)(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + rfi + nop + +2: bv %r0(%r2) + nop + .exit + + .procend + + .end diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c new file mode 100644 index 000000000000..f40a777dd388 --- /dev/null +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -0,0 +1,187 @@ +/* + * Architecture-specific kernel symbols + * + * Copyright (C) 2000-2001 Richard Hirst + * Copyright (C) 2001 Dave Kennedy + * Copyright (C) 2001 Paul Bame + * Copyright (C) 2001-2003 Grant Grundler + * Copyright (C) 2002-2003 Matthew Wilcox + * Copyright (C) 2002 Randolph Chung + * Copyright (C) 2002-2003 Helge Deller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memmove); +EXPORT_SYMBOL(memscan); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(strcat); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strcpy); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strncat); +EXPORT_SYMBOL(strncmp); +EXPORT_SYMBOL(strncpy); +EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strrchr); +EXPORT_SYMBOL(strstr); +EXPORT_SYMBOL(strpbrk); + +#include +EXPORT_SYMBOL(pm_power_off); + +#include +EXPORT_SYMBOL(__xchg8); +EXPORT_SYMBOL(__xchg32); +EXPORT_SYMBOL(__cmpxchg_u32); +#ifdef CONFIG_SMP +EXPORT_SYMBOL(__atomic_hash); +#endif +#ifdef __LP64__ +EXPORT_SYMBOL(__xchg64); +EXPORT_SYMBOL(__cmpxchg_u64); +#endif + +#include +EXPORT_SYMBOL(lstrncpy_from_user); +EXPORT_SYMBOL(lclear_user); +EXPORT_SYMBOL(lstrnlen_user); + +/* Global fixups */ +extern void fixup_get_user_skip_1(void); +extern void fixup_get_user_skip_2(void); +extern void fixup_put_user_skip_1(void); +extern void fixup_put_user_skip_2(void); +EXPORT_SYMBOL(fixup_get_user_skip_1); +EXPORT_SYMBOL(fixup_get_user_skip_2); +EXPORT_SYMBOL(fixup_put_user_skip_1); +EXPORT_SYMBOL(fixup_put_user_skip_2); + +#ifndef __LP64__ +/* Needed so insmod can set dp value */ +extern int $global$; +EXPORT_SYMBOL($global$); +#endif + +#include +EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(iounmap); +EXPORT_SYMBOL(memcpy_toio); +EXPORT_SYMBOL(memcpy_fromio); +EXPORT_SYMBOL(memset_io); + +#include +EXPORT_SYMBOL(sys_open); +EXPORT_SYMBOL(sys_lseek); +EXPORT_SYMBOL(sys_read); +EXPORT_SYMBOL(sys_write); + +#include +EXPORT_SYMBOL(__up); +EXPORT_SYMBOL(__down_interruptible); +EXPORT_SYMBOL(__down); + +extern void $$divI(void); +extern void $$divU(void); +extern void $$remI(void); +extern void $$remU(void); +extern void $$mulI(void); +extern void $$divU_3(void); +extern void $$divU_5(void); +extern void $$divU_6(void); +extern void $$divU_9(void); +extern void $$divU_10(void); +extern void $$divU_12(void); +extern void $$divU_7(void); +extern void $$divU_14(void); +extern void $$divU_15(void); +extern void $$divI_3(void); +extern void $$divI_5(void); +extern void $$divI_6(void); +extern void $$divI_7(void); +extern void $$divI_9(void); +extern void $$divI_10(void); +extern void $$divI_12(void); +extern void $$divI_14(void); +extern void $$divI_15(void); + +EXPORT_SYMBOL($$divI); +EXPORT_SYMBOL($$divU); +EXPORT_SYMBOL($$remI); +EXPORT_SYMBOL($$remU); +EXPORT_SYMBOL($$mulI); +EXPORT_SYMBOL($$divU_3); +EXPORT_SYMBOL($$divU_5); +EXPORT_SYMBOL($$divU_6); +EXPORT_SYMBOL($$divU_9); +EXPORT_SYMBOL($$divU_10); +EXPORT_SYMBOL($$divU_12); +EXPORT_SYMBOL($$divU_7); +EXPORT_SYMBOL($$divU_14); +EXPORT_SYMBOL($$divU_15); +EXPORT_SYMBOL($$divI_3); +EXPORT_SYMBOL($$divI_5); +EXPORT_SYMBOL($$divI_6); +EXPORT_SYMBOL($$divI_7); +EXPORT_SYMBOL($$divI_9); +EXPORT_SYMBOL($$divI_10); +EXPORT_SYMBOL($$divI_12); +EXPORT_SYMBOL($$divI_14); +EXPORT_SYMBOL($$divI_15); + +extern void __ashrdi3(void); +extern void __ashldi3(void); +extern void __lshrdi3(void); +extern void __muldi3(void); + +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__muldi3); + +asmlinkage void * __canonicalize_funcptr_for_compare(void *); +EXPORT_SYMBOL(__canonicalize_funcptr_for_compare); + +#ifdef __LP64__ +extern void __divdi3(void); +extern void __udivdi3(void); +extern void __umoddi3(void); +extern void __moddi3(void); + +EXPORT_SYMBOL(__divdi3); +EXPORT_SYMBOL(__udivdi3); +EXPORT_SYMBOL(__umoddi3); +EXPORT_SYMBOL(__moddi3); +#endif + +#ifndef __LP64__ +extern void $$dyncall(void); +EXPORT_SYMBOL($$dyncall); +#endif + +#ifdef CONFIG_DISCONTIGMEM +#include +EXPORT_SYMBOL(node_data); +EXPORT_SYMBOL(pfnnid_map); +#endif diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c new file mode 100644 index 000000000000..368cc095c99f --- /dev/null +++ b/arch/parisc/kernel/pci-dma.c @@ -0,0 +1,578 @@ +/* +** PARISC 1.1 Dynamic DMA mapping support. +** This implementation is for PA-RISC platforms that do not support +** I/O TLBs (aka DMA address translation hardware). +** See Documentation/DMA-mapping.txt for interface definitions. +** +** (c) Copyright 1999,2000 Hewlett-Packard Company +** (c) Copyright 2000 Grant Grundler +** (c) Copyright 2000 Philipp Rumpf +** (c) Copyright 2000 John Marvin +** +** "leveraged" from 2.3.47: arch/ia64/kernel/pci-dma.c. +** (I assume it's from David Mosberger-Tang but there was no Copyright) +** +** AFAIK, all PA7100LC and PA7300LC platforms can use this code. +** +** - ggg +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include /* for DMA_CHUNK_SIZE */ +#include +#include /* get_order */ +#include +#include + + +static struct proc_dir_entry * proc_gsc_root = NULL; +static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length); +static unsigned long pcxl_used_bytes = 0; +static unsigned long pcxl_used_pages = 0; + +extern unsigned long pcxl_dma_start; /* Start of pcxl dma mapping area */ +static spinlock_t pcxl_res_lock; +static char *pcxl_res_map; +static int pcxl_res_hint; +static int pcxl_res_size; + +#ifdef DEBUG_PCXL_RESOURCE +#define DBG_RES(x...) printk(x) +#else +#define DBG_RES(x...) +#endif + + +/* +** Dump a hex representation of the resource map. +*/ + +#ifdef DUMP_RESMAP +static +void dump_resmap(void) +{ + u_long *res_ptr = (unsigned long *)pcxl_res_map; + u_long i = 0; + + printk("res_map: "); + for(; i < (pcxl_res_size / sizeof(unsigned long)); ++i, ++res_ptr) + printk("%08lx ", *res_ptr); + + printk("\n"); +} +#else +static inline void dump_resmap(void) {;} +#endif + +static int pa11_dma_supported( struct device *dev, u64 mask) +{ + return 1; +} + +static inline int map_pte_uncached(pte_t * pte, + unsigned long vaddr, + unsigned long size, unsigned long *paddr_ptr) +{ + unsigned long end; + unsigned long orig_vaddr = vaddr; + + vaddr &= ~PMD_MASK; + end = vaddr + size; + if (end > PMD_SIZE) + end = PMD_SIZE; + do { + if (!pte_none(*pte)) + printk(KERN_ERR "map_pte_uncached: page already exists\n"); + set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC)); + purge_tlb_start(); + pdtlb_kernel(orig_vaddr); + purge_tlb_end(); + vaddr += PAGE_SIZE; + orig_vaddr += PAGE_SIZE; + (*paddr_ptr) += PAGE_SIZE; + pte++; + } while (vaddr < end); + return 0; +} + +static inline int map_pmd_uncached(pmd_t * pmd, unsigned long vaddr, + unsigned long size, unsigned long *paddr_ptr) +{ + unsigned long end; + unsigned long orig_vaddr = vaddr; + + vaddr &= ~PGDIR_MASK; + end = vaddr + size; + if (end > PGDIR_SIZE) + end = PGDIR_SIZE; + do { + pte_t * pte = pte_alloc_kernel(&init_mm, pmd, vaddr); + if (!pte) + return -ENOMEM; + if (map_pte_uncached(pte, orig_vaddr, end - vaddr, paddr_ptr)) + return -ENOMEM; + vaddr = (vaddr + PMD_SIZE) & PMD_MASK; + orig_vaddr += PMD_SIZE; + pmd++; + } while (vaddr < end); + return 0; +} + +static inline int map_uncached_pages(unsigned long vaddr, unsigned long size, + unsigned long paddr) +{ + pgd_t * dir; + unsigned long end = vaddr + size; + + dir = pgd_offset_k(vaddr); + do { + pmd_t *pmd; + + pmd = pmd_alloc(NULL, dir, vaddr); + if (!pmd) + return -ENOMEM; + if (map_pmd_uncached(pmd, vaddr, end - vaddr, &paddr)) + return -ENOMEM; + vaddr = vaddr + PGDIR_SIZE; + dir++; + } while (vaddr && (vaddr < end)); + return 0; +} + +static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr, + unsigned long size) +{ + pte_t * pte; + unsigned long end; + unsigned long orig_vaddr = vaddr; + + if (pmd_none(*pmd)) + return; + if (pmd_bad(*pmd)) { + pmd_ERROR(*pmd); + pmd_clear(pmd); + return; + } + pte = pte_offset_map(pmd, vaddr); + vaddr &= ~PMD_MASK; + end = vaddr + size; + if (end > PMD_SIZE) + end = PMD_SIZE; + do { + pte_t page = *pte; + pte_clear(&init_mm, vaddr, pte); + purge_tlb_start(); + pdtlb_kernel(orig_vaddr); + purge_tlb_end(); + vaddr += PAGE_SIZE; + orig_vaddr += PAGE_SIZE; + pte++; + if (pte_none(page) || pte_present(page)) + continue; + printk(KERN_CRIT "Whee.. Swapped out page in kernel page table\n"); + } while (vaddr < end); +} + +static inline void unmap_uncached_pmd(pgd_t * dir, unsigned long vaddr, + unsigned long size) +{ + pmd_t * pmd; + unsigned long end; + unsigned long orig_vaddr = vaddr; + + if (pgd_none(*dir)) + return; + if (pgd_bad(*dir)) { + pgd_ERROR(*dir); + pgd_clear(dir); + return; + } + pmd = pmd_offset(dir, vaddr); + vaddr &= ~PGDIR_MASK; + end = vaddr + size; + if (end > PGDIR_SIZE) + end = PGDIR_SIZE; + do { + unmap_uncached_pte(pmd, orig_vaddr, end - vaddr); + vaddr = (vaddr + PMD_SIZE) & PMD_MASK; + orig_vaddr += PMD_SIZE; + pmd++; + } while (vaddr < end); +} + +static void unmap_uncached_pages(unsigned long vaddr, unsigned long size) +{ + pgd_t * dir; + unsigned long end = vaddr + size; + + dir = pgd_offset_k(vaddr); + do { + unmap_uncached_pmd(dir, vaddr, end - vaddr); + vaddr = vaddr + PGDIR_SIZE; + dir++; + } while (vaddr && (vaddr < end)); +} + +#define PCXL_SEARCH_LOOP(idx, mask, size) \ + for(; res_ptr < res_end; ++res_ptr) \ + { \ + if(0 == ((*res_ptr) & mask)) { \ + *res_ptr |= mask; \ + idx = (int)((u_long)res_ptr - (u_long)pcxl_res_map); \ + pcxl_res_hint = idx + (size >> 3); \ + goto resource_found; \ + } \ + } + +#define PCXL_FIND_FREE_MAPPING(idx, mask, size) { \ + u##size *res_ptr = (u##size *)&(pcxl_res_map[pcxl_res_hint & ~((size >> 3) - 1)]); \ + u##size *res_end = (u##size *)&pcxl_res_map[pcxl_res_size]; \ + PCXL_SEARCH_LOOP(idx, mask, size); \ + res_ptr = (u##size *)&pcxl_res_map[0]; \ + PCXL_SEARCH_LOOP(idx, mask, size); \ +} + +unsigned long +pcxl_alloc_range(size_t size) +{ + int res_idx; + u_long mask, flags; + unsigned int pages_needed = size >> PAGE_SHIFT; + + mask = (u_long) -1L; + mask >>= BITS_PER_LONG - pages_needed; + + DBG_RES("pcxl_alloc_range() size: %d pages_needed %d pages_mask 0x%08lx\n", + size, pages_needed, mask); + + spin_lock_irqsave(&pcxl_res_lock, flags); + + if(pages_needed <= 8) { + PCXL_FIND_FREE_MAPPING(res_idx, mask, 8); + } else if(pages_needed <= 16) { + PCXL_FIND_FREE_MAPPING(res_idx, mask, 16); + } else if(pages_needed <= 32) { + PCXL_FIND_FREE_MAPPING(res_idx, mask, 32); + } else { + panic("%s: pcxl_alloc_range() Too many pages to map.\n", + __FILE__); + } + + dump_resmap(); + panic("%s: pcxl_alloc_range() out of dma mapping resources\n", + __FILE__); + +resource_found: + + DBG_RES("pcxl_alloc_range() res_idx %d mask 0x%08lx res_hint: %d\n", + res_idx, mask, pcxl_res_hint); + + pcxl_used_pages += pages_needed; + pcxl_used_bytes += ((pages_needed >> 3) ? (pages_needed >> 3) : 1); + + spin_unlock_irqrestore(&pcxl_res_lock, flags); + + dump_resmap(); + + /* + ** return the corresponding vaddr in the pcxl dma map + */ + return (pcxl_dma_start + (res_idx << (PAGE_SHIFT + 3))); +} + +#define PCXL_FREE_MAPPINGS(idx, m, size) \ + u##size *res_ptr = (u##size *)&(pcxl_res_map[(idx) + (((size >> 3) - 1) & (~((size >> 3) - 1)))]); \ + /* BUG_ON((*res_ptr & m) != m); */ \ + *res_ptr &= ~m; + +/* +** clear bits in the pcxl resource map +*/ +static void +pcxl_free_range(unsigned long vaddr, size_t size) +{ + u_long mask, flags; + unsigned int res_idx = (vaddr - pcxl_dma_start) >> (PAGE_SHIFT + 3); + unsigned int pages_mapped = size >> PAGE_SHIFT; + + mask = (u_long) -1L; + mask >>= BITS_PER_LONG - pages_mapped; + + DBG_RES("pcxl_free_range() res_idx: %d size: %d pages_mapped %d mask 0x%08lx\n", + res_idx, size, pages_mapped, mask); + + spin_lock_irqsave(&pcxl_res_lock, flags); + + if(pages_mapped <= 8) { + PCXL_FREE_MAPPINGS(res_idx, mask, 8); + } else if(pages_mapped <= 16) { + PCXL_FREE_MAPPINGS(res_idx, mask, 16); + } else if(pages_mapped <= 32) { + PCXL_FREE_MAPPINGS(res_idx, mask, 32); + } else { + panic("%s: pcxl_free_range() Too many pages to unmap.\n", + __FILE__); + } + + pcxl_used_pages -= (pages_mapped ? pages_mapped : 1); + pcxl_used_bytes -= ((pages_mapped >> 3) ? (pages_mapped >> 3) : 1); + + spin_unlock_irqrestore(&pcxl_res_lock, flags); + + dump_resmap(); +} + +static int __init +pcxl_dma_init(void) +{ + if (pcxl_dma_start == 0) + return 0; + + spin_lock_init(&pcxl_res_lock); + pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); + pcxl_res_hint = 0; + pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, + get_order(pcxl_res_size)); + memset(pcxl_res_map, 0, pcxl_res_size); + proc_gsc_root = proc_mkdir("gsc", 0); + create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info); + return 0; +} + +__initcall(pcxl_dma_init); + +static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +{ + unsigned long vaddr; + unsigned long paddr; + int order; + + order = get_order(size); + size = 1 << (order + PAGE_SHIFT); + vaddr = pcxl_alloc_range(size); + paddr = __get_free_pages(flag, order); + flush_kernel_dcache_range(paddr, size); + paddr = __pa(paddr); + map_uncached_pages(vaddr, size, paddr); + *dma_handle = (dma_addr_t) paddr; + +#if 0 +/* This probably isn't needed to support EISA cards. +** ISA cards will certainly only support 24-bit DMA addressing. +** Not clear if we can, want, or need to support ISA. +*/ + if (!dev || *dev->coherent_dma_mask < 0xffffffff) + gfp |= GFP_DMA; +#endif + return (void *)vaddr; +} + +static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) +{ + int order; + + order = get_order(size); + size = 1 << (order + PAGE_SHIFT); + unmap_uncached_pages((unsigned long)vaddr, size); + pcxl_free_range((unsigned long)vaddr, size); + free_pages((unsigned long)__va(dma_handle), order); +} + +static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction) +{ + if (direction == DMA_NONE) { + printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); + BUG(); + } + + flush_kernel_dcache_range((unsigned long) addr, size); + return virt_to_phys(addr); +} + +static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) +{ + if (direction == DMA_NONE) { + printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); + BUG(); + } + + if (direction == DMA_TO_DEVICE) + return; + + /* + * For PCI_DMA_FROMDEVICE this flush is not necessary for the + * simple map/unmap case. However, it IS necessary if if + * pci_dma_sync_single_* has been called and the buffer reused. + */ + + flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle), size); + return; +} + +static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction) +{ + int i; + + if (direction == DMA_NONE) + BUG(); + + for (i = 0; i < nents; i++, sglist++ ) { + unsigned long vaddr = sg_virt_addr(sglist); + sg_dma_address(sglist) = (dma_addr_t) virt_to_phys(vaddr); + sg_dma_len(sglist) = sglist->length; + flush_kernel_dcache_range(vaddr, sglist->length); + } + return nents; +} + +static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction) +{ + int i; + + if (direction == DMA_NONE) + BUG(); + + if (direction == DMA_TO_DEVICE) + return; + + /* once we do combining we'll need to use phys_to_virt(sg_dma_address(sglist)) */ + + for (i = 0; i < nents; i++, sglist++ ) + flush_kernel_dcache_range(sg_virt_addr(sglist), sglist->length); + return; +} + +static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) +{ + if (direction == DMA_NONE) + BUG(); + + flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); +} + +static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) +{ + if (direction == DMA_NONE) + BUG(); + + flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); +} + +static void pa11_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction) +{ + int i; + + /* once we do combining we'll need to use phys_to_virt(sg_dma_address(sglist)) */ + + for (i = 0; i < nents; i++, sglist++ ) + flush_kernel_dcache_range(sg_virt_addr(sglist), sglist->length); +} + +static void pa11_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction) +{ + int i; + + /* once we do combining we'll need to use phys_to_virt(sg_dma_address(sglist)) */ + + for (i = 0; i < nents; i++, sglist++ ) + flush_kernel_dcache_range(sg_virt_addr(sglist), sglist->length); +} + +struct hppa_dma_ops pcxl_dma_ops = { + .dma_supported = pa11_dma_supported, + .alloc_consistent = pa11_dma_alloc_consistent, + .alloc_noncoherent = pa11_dma_alloc_consistent, + .free_consistent = pa11_dma_free_consistent, + .map_single = pa11_dma_map_single, + .unmap_single = pa11_dma_unmap_single, + .map_sg = pa11_dma_map_sg, + .unmap_sg = pa11_dma_unmap_sg, + .dma_sync_single_for_cpu = pa11_dma_sync_single_for_cpu, + .dma_sync_single_for_device = pa11_dma_sync_single_for_device, + .dma_sync_sg_for_cpu = pa11_dma_sync_sg_for_cpu, + .dma_sync_sg_for_device = pa11_dma_sync_sg_for_device, +}; + +static void *fail_alloc_consistent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag) +{ + return NULL; +} + +static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag) +{ + void *addr = NULL; + + /* rely on kmalloc to be cacheline aligned */ + addr = kmalloc(size, flag); + if(addr) + *dma_handle = (dma_addr_t)virt_to_phys(addr); + + return addr; +} + +static void pa11_dma_free_noncoherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t iova) +{ + kfree(vaddr); + return; +} + +struct hppa_dma_ops pcx_dma_ops = { + .dma_supported = pa11_dma_supported, + .alloc_consistent = fail_alloc_consistent, + .alloc_noncoherent = pa11_dma_alloc_noncoherent, + .free_consistent = pa11_dma_free_noncoherent, + .map_single = pa11_dma_map_single, + .unmap_single = pa11_dma_unmap_single, + .map_sg = pa11_dma_map_sg, + .unmap_sg = pa11_dma_unmap_sg, + .dma_sync_single_for_cpu = pa11_dma_sync_single_for_cpu, + .dma_sync_single_for_device = pa11_dma_sync_single_for_device, + .dma_sync_sg_for_cpu = pa11_dma_sync_sg_for_cpu, + .dma_sync_sg_for_device = pa11_dma_sync_sg_for_device, +}; + + +static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) +{ + u_long i = 0; + unsigned long *res_ptr = (u_long *)pcxl_res_map; + unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ + + sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n", + PCXL_DMA_MAP_SIZE, + (pcxl_res_size << 3) ); /* 1 bit per page */ + + sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", + buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */ + + strcat(buf, " total: free: used: % used:\n"); + sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size, + pcxl_res_size - pcxl_used_bytes, pcxl_used_bytes, + (pcxl_used_bytes * 100) / pcxl_res_size); + + sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages, + total_pages - pcxl_used_pages, pcxl_used_pages, + (pcxl_used_pages * 100 / total_pages)); + + strcat(buf, "\nResource bitmap:"); + + for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) { + if ((i & 7) == 0) + strcat(buf,"\n "); + sprintf(buf, "%s %08lx", buf, *res_ptr); + } + strcat(buf, "\n"); + return strlen(buf); +} + diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c new file mode 100644 index 000000000000..3cb08a4a513a --- /dev/null +++ b/arch/parisc/kernel/pci.c @@ -0,0 +1,346 @@ +/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $ + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1998 Ralf Baechle + * Copyright (C) 1999 SuSE GmbH + * Copyright (C) 1999-2001 Hewlett-Packard Company + * Copyright (C) 1999-2001 Grant Grundler + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include /* for L1_CACHE_BYTES */ +#include + +#define DEBUG_RESOURCES 0 +#define DEBUG_CONFIG 0 + +#if DEBUG_CONFIG +# define DBGC(x...) printk(KERN_DEBUG x) +#else +# define DBGC(x...) +#endif + + +#if DEBUG_RESOURCES +#define DBG_RES(x...) printk(KERN_DEBUG x) +#else +#define DBG_RES(x...) +#endif + +/* To be used as: mdelay(pci_post_reset_delay); + * + * post_reset is the time the kernel should stall to prevent anyone from + * accessing the PCI bus once #RESET is de-asserted. + * PCI spec somewhere says 1 second but with multi-PCI bus systems, + * this makes the boot time much longer than necessary. + * 20ms seems to work for all the HP PCI implementations to date. + * + * XXX: turn into a #defined constant in ? + */ +int pci_post_reset_delay = 50; + +struct pci_port_ops *pci_port; +struct pci_bios_ops *pci_bios; + +int pci_hba_count = 0; + +/* parisc_pci_hba used by pci_port->in/out() ops to lookup bus data. */ +#define PCI_HBA_MAX 32 +struct pci_hba_data *parisc_pci_hba[PCI_HBA_MAX]; + + +/******************************************************************** +** +** I/O port space support +** +*********************************************************************/ + +/* EISA port numbers and PCI port numbers share the same interface. Some + * machines have both EISA and PCI adapters installed. Rather than turn + * pci_port into an array, we reserve bus 0 for EISA and call the EISA + * routines if the access is to a port on bus 0. We don't want to fix + * EISA and ISA drivers which assume port space is <= 0xffff. + */ + +#ifdef CONFIG_EISA +#define EISA_IN(size) if (EISA_bus && (b == 0)) return eisa_in##size(addr) +#define EISA_OUT(size) if (EISA_bus && (b == 0)) return eisa_out##size(d, addr) +#else +#define EISA_IN(size) +#define EISA_OUT(size) +#endif + +#define PCI_PORT_IN(type, size) \ +u##size in##type (int addr) \ +{ \ + int b = PCI_PORT_HBA(addr); \ + EISA_IN(size); \ + if (!parisc_pci_hba[b]) return (u##size) -1; \ + return pci_port->in##type(parisc_pci_hba[b], PCI_PORT_ADDR(addr)); \ +} \ +EXPORT_SYMBOL(in##type); + +PCI_PORT_IN(b, 8) +PCI_PORT_IN(w, 16) +PCI_PORT_IN(l, 32) + + +#define PCI_PORT_OUT(type, size) \ +void out##type (u##size d, int addr) \ +{ \ + int b = PCI_PORT_HBA(addr); \ + EISA_OUT(size); \ + if (!parisc_pci_hba[b]) return; \ + pci_port->out##type(parisc_pci_hba[b], PCI_PORT_ADDR(addr), d); \ +} \ +EXPORT_SYMBOL(out##type); + +PCI_PORT_OUT(b, 8) +PCI_PORT_OUT(w, 16) +PCI_PORT_OUT(l, 32) + + + +/* + * BIOS32 replacement. + */ +static int __init pcibios_init(void) +{ + if (!pci_bios) + return -1; + + if (pci_bios->init) { + pci_bios->init(); + } else { + printk(KERN_WARNING "pci_bios != NULL but init() is!\n"); + } + return 0; +} + + +/* Called from pci_do_scan_bus() *after* walking a bus but before walking PPBs. */ +void pcibios_fixup_bus(struct pci_bus *bus) +{ + if (pci_bios->fixup_bus) { + pci_bios->fixup_bus(bus); + } else { + printk(KERN_WARNING "pci_bios != NULL but fixup_bus() is!\n"); + } +} + + +char *pcibios_setup(char *str) +{ + return str; +} + +/* + * Called by pci_set_master() - a driver interface. + * + * Legacy PDC guarantees to set: + * Map Memory BAR's into PA IO space. + * Map Expansion ROM BAR into one common PA IO space per bus. + * Map IO BAR's into PCI IO space. + * Command (see below) + * Cache Line Size + * Latency Timer + * Interrupt Line + * PPB: secondary latency timer, io/mmio base/limit, + * bus numbers, bridge control + * + */ +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + + /* If someone already mucked with this, don't touch it. */ + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat >= 16) return; + + /* + ** HP generally has fewer devices on the bus than other architectures. + ** upper byte is PCI_LATENCY_TIMER. + */ + pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, + (0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32))); +} + + +void __init pcibios_init_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + unsigned short bridge_ctl; + + /* We deal only with pci controllers and pci-pci bridges. */ + if (!dev || (dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + return; + + /* PCI-PCI bridge - set the cache line and default latency + (32) for primary and secondary buses. */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 32); + + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bridge_ctl); + bridge_ctl |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl); +} + + +/* KLUGE: Link the child and parent resources - generic PCI didn't */ +static void +pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) +{ + if (!r->parent) { + printk(KERN_EMERG "PCI: Tell willy he's wrong\n"); + r->parent = hba_res; + + /* reverse link is harder *sigh* */ + if (r->parent->child) { + if (r->parent->sibling) { + struct resource *next = r->parent->sibling; + while (next->sibling) + next = next->sibling; + next->sibling = r; + } else { + r->parent->sibling = r; + } + } else + r->parent->child = r; + } +} + +/* called by drivers/pci/setup-bus.c:pci_setup_bridge(). */ +void __devinit pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res) +{ + struct pci_bus *bus = dev->bus; + struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data); + + if (res->flags & IORESOURCE_IO) { + /* + ** I/O space may see busnumbers here. Something + ** in the form of 0xbbxxxx where bb is the bus num + ** and xxxx is the I/O port space address. + ** Remaining address translation are done in the + ** PCI Host adapter specific code - ie dino_out8. + */ + region->start = PCI_PORT_ADDR(res->start); + region->end = PCI_PORT_ADDR(res->end); + } else if (res->flags & IORESOURCE_MEM) { + /* Convert MMIO addr to PCI addr (undo global virtualization) */ + region->start = PCI_BUS_ADDR(hba, res->start); + region->end = PCI_BUS_ADDR(hba, res->end); + } + + DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n", + bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM", + region->start, region->end); + + /* KLUGE ALERT + ** if this resource isn't linked to a "parent", then it seems + ** to be a child of the HBA - lets link it in. + */ + pcibios_link_hba_resources(&hba->io_space, bus->resource[0]); + pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]); +} + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +#endif + +/* + * pcibios align resources() is called every time generic PCI code + * wants to generate a new address. The process of looking for + * an available address, each candidate is first "aligned" and + * then checked if the resource is available until a match is found. + * + * Since we are just checking candidates, don't use any fields other + * than res->start. + */ +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long alignment) +{ + unsigned long mask, align; + + DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n", + pci_name(((struct pci_dev *) data)), + res->parent, res->start, res->end, + (int) res->flags, size, alignment); + + /* If it's not IO, then it's gotta be MEM */ + align = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM; + + /* Align to largest of MIN or input size */ + mask = max(alignment, align) - 1; + res->start += mask; + res->start &= ~mask; + + /* The caller updates the end field, we don't. */ +} + + +/* + * A driver is enabling the device. We make sure that all the appropriate + * bits are set to allow the device to operate as the driver is expecting. + * We enable the port IO and memory IO bits if the device has any BARs of + * that type, and we enable the PERR and SERR bits unconditionally. + * Drivers that do not need parity (eg graphics and possibly networking) + * can clear these bits if they want. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd; + int idx; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + + for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) { + struct resource *r = &dev->resource[idx]; + + /* only setup requested resources */ + if (!(mask & (1<flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + + cmd |= (PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + +#if 0 + /* If bridge/bus controller has FBB enabled, child must too. */ + if (dev->bus->bridge_ctl & PCI_BRIDGE_CTL_FAST_BACK) + cmd |= PCI_COMMAND_FAST_BACK; +#endif + DBGC("PCIBIOS: Enabling device %s cmd 0x%04x\n", pci_name(dev), cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + return 0; +} + + +/* PA-RISC specific */ +void pcibios_register_hba(struct pci_hba_data *hba) +{ + if (pci_hba_count >= PCI_HBA_MAX) { + printk(KERN_ERR "PCI: Too many Host Bus Adapters\n"); + return; + } + + parisc_pci_hba[pci_hba_count] = hba; + hba->hba_num = pci_hba_count++; +} + +subsys_initcall(pcibios_init); diff --git a/arch/parisc/kernel/pdc_chassis.c b/arch/parisc/kernel/pdc_chassis.c new file mode 100644 index 000000000000..52004ae28d20 --- /dev/null +++ b/arch/parisc/kernel/pdc_chassis.c @@ -0,0 +1,245 @@ +/* + * interfaces to log Chassis Codes via PDC (firmware) + * + * Copyright (C) 2002 Laurent Canet + * Copyright (C) 2002-2004 Thibaut VARENE + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef PDC_CHASSIS_DEBUG +#ifdef PDC_CHASSIS_DEBUG +#define DPRINTK(fmt, args...) printk(fmt, ## args) +#else +#define DPRINTK(fmt, args...) +#endif + +#include +#include +#include +#include + +#include +#include +#include +#include + + +#ifdef CONFIG_PDC_CHASSIS +static int pdc_chassis_old = 0; +static unsigned int pdc_chassis_enabled = 1; + + +/** + * pdc_chassis_setup() - Enable/disable pdc_chassis code at boot time. + * @str configuration param: 0 to disable chassis log + * @return 1 + */ + +static int __init pdc_chassis_setup(char *str) +{ + /*panic_timeout = simple_strtoul(str, NULL, 0);*/ + get_option(&str, &pdc_chassis_enabled); + return 1; +} +__setup("pdcchassis=", pdc_chassis_setup); + + +/** + * pdc_chassis_checkold() - Checks for old PDC_CHASSIS compatibility + * @pdc_chassis_old: 1 if old pdc chassis style + * + * Currently, only E class and A180 are known to work with this. + * Inspired by Christoph Plattner + */ + +static void __init pdc_chassis_checkold(void) +{ + switch(CPU_HVERSION) { + case 0x480: /* E25 */ + case 0x481: /* E35 */ + case 0x482: /* E45 */ + case 0x483: /* E55 */ + case 0x516: /* A180 */ + pdc_chassis_old = 1; + break; + + default: + break; + } + DPRINTK(KERN_DEBUG "%s: pdc_chassis_checkold(); pdc_chassis_old = %d\n", __FILE__, pdc_chassis_old); +} + + +/** + * pdc_chassis_panic_event() - Called by the panic handler. + * + * As soon as a panic occurs, we should inform the PDC. + */ + +static int pdc_chassis_panic_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC); + return NOTIFY_DONE; +} + + +static struct notifier_block pdc_chassis_panic_block = { + .notifier_call = pdc_chassis_panic_event, + .priority = INT_MAX, +}; + + +/** + * parisc_reboot_event() - Called by the reboot handler. + * + * As soon as a reboot occurs, we should inform the PDC. + */ + +static int pdc_chassis_reboot_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN); + return NOTIFY_DONE; +} + + +static struct notifier_block pdc_chassis_reboot_block = { + .notifier_call = pdc_chassis_reboot_event, + .priority = INT_MAX, +}; +#endif /* CONFIG_PDC_CHASSIS */ + + +/** + * parisc_pdc_chassis_init() - Called at boot time. + */ + +void __init parisc_pdc_chassis_init(void) +{ +#ifdef CONFIG_PDC_CHASSIS + int handle = 0; + if (pdc_chassis_enabled) { + DPRINTK(KERN_DEBUG "%s: parisc_pdc_chassis_init()\n", __FILE__); + + /* Let see if we have something to handle... */ + /* Check for PDC_PAT or old LED Panel */ + pdc_chassis_checkold(); + if (is_pdc_pat()) { + printk(KERN_INFO "Enabling PDC_PAT chassis codes support.\n"); + handle = 1; + } + else if (pdc_chassis_old) { + printk(KERN_INFO "Enabling old style chassis LED panel support.\n"); + handle = 1; + } + + if (handle) { + /* initialize panic notifier chain */ + notifier_chain_register(&panic_notifier_list, &pdc_chassis_panic_block); + + /* initialize reboot notifier chain */ + register_reboot_notifier(&pdc_chassis_reboot_block); + } + } +#endif /* CONFIG_PDC_CHASSIS */ +} + + +/** + * pdc_chassis_send_status() - Sends a predefined message to the chassis, + * and changes the front panel LEDs according to the new system state + * @retval: PDC call return value. + * + * Only machines with 64 bits PDC PAT and those reported in + * pdc_chassis_checkold() are supported atm. + * + * returns 0 if no error, -1 if no supported PDC is present or invalid message, + * else returns the appropriate PDC error code. + * + * For a list of predefined messages, see asm-parisc/pdc_chassis.h + */ + +int pdc_chassis_send_status(int message) +{ + /* Maybe we should do that in an other way ? */ + int retval = 0; +#ifdef CONFIG_PDC_CHASSIS + if (pdc_chassis_enabled) { + + DPRINTK(KERN_DEBUG "%s: pdc_chassis_send_status(%d)\n", __FILE__, message); + +#ifdef CONFIG_64BIT + if (is_pdc_pat()) { + switch(message) { + case PDC_CHASSIS_DIRECT_BSTART: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_BSTART, PDC_CHASSIS_LSTATE_RUN_NORMAL); + break; + + case PDC_CHASSIS_DIRECT_BCOMPLETE: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_BCOMPLETE, PDC_CHASSIS_LSTATE_RUN_NORMAL); + break; + + case PDC_CHASSIS_DIRECT_SHUTDOWN: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_SHUTDOWN, PDC_CHASSIS_LSTATE_NONOS); + break; + + case PDC_CHASSIS_DIRECT_PANIC: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_PANIC, PDC_CHASSIS_LSTATE_RUN_CRASHREC); + break; + + case PDC_CHASSIS_DIRECT_LPMC: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_LPMC, PDC_CHASSIS_LSTATE_RUN_SYSINT); + break; + + case PDC_CHASSIS_DIRECT_HPMC: + retval = pdc_pat_chassis_send_log(PDC_CHASSIS_PMSG_HPMC, PDC_CHASSIS_LSTATE_RUN_NCRIT); + break; + + default: + retval = -1; + } + } else retval = -1; +#else + if (pdc_chassis_old) { + switch (message) { + case PDC_CHASSIS_DIRECT_BSTART: + case PDC_CHASSIS_DIRECT_BCOMPLETE: + retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_RUN)); + break; + + case PDC_CHASSIS_DIRECT_SHUTDOWN: + retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_SHUT)); + break; + + case PDC_CHASSIS_DIRECT_HPMC: + case PDC_CHASSIS_DIRECT_PANIC: + retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_FLT)); + break; + + case PDC_CHASSIS_DIRECT_LPMC: + retval = pdc_chassis_disp(PDC_CHASSIS_DISP_DATA(OSTAT_WARN)); + break; + + default: + retval = -1; + } + } else retval = -1; +#endif /* CONFIG_64BIT */ + } /* if (pdc_chassis_enabled) */ +#endif /* CONFIG_PDC_CHASSIS */ + return retval; +} diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c new file mode 100644 index 000000000000..01f676d1673b --- /dev/null +++ b/arch/parisc/kernel/pdc_cons.c @@ -0,0 +1,189 @@ +/* + * PDC Console support - ie use firmware to dump text via boot console + * + * Copyright (C) 1999-2003 Matthew Wilcox + * Copyright (C) 2000 Martin K Petersen + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000-2003 Paul Bame + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 Michael Ang + * Copyright (C) 2000 Grant Grundler + * Copyright (C) 2001-2002 Ryan Bradetich + * Copyright (C) 2001 Helge Deller + * Copyright (C) 2001 Thomas Bogendoerfer + * Copyright (C) 2002 Randolph Chung + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The PDC console is a simple console, which can be used for debugging + * boot related problems on HP PA-RISC machines. + * + * This code uses the ROM (=PDC) based functions to read and write characters + * from and to PDC's boot path. + * Since all character read from that path must be polled, this code never + * can or will be a fully functional linux console. + */ + +/* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. + * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */ +#undef EARLY_BOOTUP_DEBUG + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for iodc_call() proto and friends */ + + +static void pdc_console_write(struct console *co, const char *s, unsigned count) +{ + while(count--) + pdc_iodc_putc(*s++); +} + +void pdc_outc(unsigned char c) +{ + pdc_iodc_outc(c); +} + +void pdc_printf(const char *fmt, ...) +{ + va_list args; + char buf[1024]; + int i, len; + + va_start(args, fmt); + len = vscnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + + for (i = 0; i < len; i++) + pdc_iodc_outc(buf[i]); +} + +int pdc_console_poll_key(struct console *co) +{ + return pdc_iodc_getc(); +} + +static int pdc_console_setup(struct console *co, char *options) +{ + return 0; +} + +#if defined(CONFIG_PDC_CONSOLE) +#define PDC_CONSOLE_DEVICE pdc_console_device +static struct tty_driver * pdc_console_device (struct console *c, int *index) +{ + extern struct tty_driver console_driver; + *index = c->index ? c->index-1 : fg_console; + return &console_driver; +} +#else +#define PDC_CONSOLE_DEVICE NULL +#endif + +static struct console pdc_cons = { + .name = "ttyB", + .write = pdc_console_write, + .device = PDC_CONSOLE_DEVICE, + .setup = pdc_console_setup, + .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED, + .index = -1, +}; + +static int pdc_console_initialized; +extern unsigned long con_start; /* kernel/printk.c */ +extern unsigned long log_end; /* kernel/printk.c */ + + +static void pdc_console_init_force(void) +{ + if (pdc_console_initialized) + return; + ++pdc_console_initialized; + + /* If the console is duplex then copy the COUT parameters to CIN. */ + if (PAGE0->mem_cons.cl_class == CL_DUPLEX) + memcpy(&PAGE0->mem_kbd, &PAGE0->mem_cons, sizeof(PAGE0->mem_cons)); + + /* register the pdc console */ + register_console(&pdc_cons); +} + +void __init pdc_console_init(void) +{ +#if defined(EARLY_BOOTUP_DEBUG) || defined(CONFIG_PDC_CONSOLE) + pdc_console_init_force(); +#endif +#ifdef EARLY_BOOTUP_DEBUG + printk(KERN_INFO "Initialized PDC Console for debugging.\n"); +#endif +} + + +/* Unregister the pdc console with the printk console layer */ +void pdc_console_die(void) +{ + if (!pdc_console_initialized) + return; + --pdc_console_initialized; + + printk(KERN_INFO "Switching from PDC console\n"); + + /* Don't repeat what we've already printed */ + con_start = log_end; + + unregister_console(&pdc_cons); +} + + +/* + * Used for emergencies. Currently only used if an HPMC occurs. If an + * HPMC occurs, it is possible that the current console may not be + * properly initialed after the PDC IO reset. This routine unregisters all + * of the current consoles, reinitializes the pdc console and + * registers it. + */ + +void pdc_console_restart(void) +{ + struct console *console; + + if (pdc_console_initialized) + return; + + while ((console = console_drivers) != NULL) + unregister_console(console_drivers); + + /* Don't repeat what we've already printed */ + con_start = log_end; + + /* force registering the pdc console */ + pdc_console_init_force(); +} + diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c new file mode 100644 index 000000000000..b3ad0a505b87 --- /dev/null +++ b/arch/parisc/kernel/perf.c @@ -0,0 +1,841 @@ +/* + * Parisc performance counters + * Copyright (C) 2001 Randolph Chung + * + * This code is derived, with permission, from HP/UX sources. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Edited comment from original sources: + * + * This driver programs the PCX-U/PCX-W performance counters + * on the PA-RISC 2.0 chips. The driver keeps all images now + * internally to the kernel to hopefully eliminate the possiblity + * of a bad image halting the CPU. Also, there are different + * images for the PCX-W and later chips vs the PCX-U chips. + * + * Only 1 process is allowed to access the driver at any time, + * so the only protection that is needed is at open and close. + * A variable "perf_enabled" is used to hold the state of the + * driver. The spinlock "perf_lock" is used to protect the + * modification of the state during open/close operations so + * multiple processes don't get into the driver simultaneously. + * + * This driver accesses the processor directly vs going through + * the PDC INTRIGUE calls. This is done to eliminate bugs introduced + * in various PDC revisions. The code is much more maintainable + * and reliable this way vs having to debug on every version of PDC + * on every box. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include /* for __raw_read() */ + +#include "perf_images.h" + +#define MAX_RDR_WORDS 24 +#define PERF_VERSION 2 /* derived from hpux's PI v2 interface */ + +/* definition of RDR regs */ +struct rdr_tbl_ent { + uint16_t width; + uint8_t num_words; + uint8_t write_control; +}; + +static int perf_processor_interface = UNKNOWN_INTF; +static int perf_enabled = 0; +static spinlock_t perf_lock; +struct parisc_device *cpu_device = NULL; + +/* RDRs to write for PCX-W */ +static int perf_rdrs_W[] = + { 0, 1, 4, 5, 6, 15, 16, 17, 18, 20, 21, 22, 23, 24, 25, -1 }; + +/* RDRs to write for PCX-U */ +static int perf_rdrs_U[] = + { 0, 1, 4, 5, 6, 7, 16, 17, 18, 20, 21, 22, 23, 24, 25, -1 }; + +/* RDR register descriptions for PCX-W */ +static struct rdr_tbl_ent perf_rdr_tbl_W[] = { + { 19, 1, 8 }, /* RDR 0 */ + { 16, 1, 16 }, /* RDR 1 */ + { 72, 2, 0 }, /* RDR 2 */ + { 81, 2, 0 }, /* RDR 3 */ + { 328, 6, 0 }, /* RDR 4 */ + { 160, 3, 0 }, /* RDR 5 */ + { 336, 6, 0 }, /* RDR 6 */ + { 164, 3, 0 }, /* RDR 7 */ + { 0, 0, 0 }, /* RDR 8 */ + { 35, 1, 0 }, /* RDR 9 */ + { 6, 1, 0 }, /* RDR 10 */ + { 18, 1, 0 }, /* RDR 11 */ + { 13, 1, 0 }, /* RDR 12 */ + { 8, 1, 0 }, /* RDR 13 */ + { 8, 1, 0 }, /* RDR 14 */ + { 8, 1, 0 }, /* RDR 15 */ + { 1530, 24, 0 }, /* RDR 16 */ + { 16, 1, 0 }, /* RDR 17 */ + { 4, 1, 0 }, /* RDR 18 */ + { 0, 0, 0 }, /* RDR 19 */ + { 152, 3, 24 }, /* RDR 20 */ + { 152, 3, 24 }, /* RDR 21 */ + { 233, 4, 48 }, /* RDR 22 */ + { 233, 4, 48 }, /* RDR 23 */ + { 71, 2, 0 }, /* RDR 24 */ + { 71, 2, 0 }, /* RDR 25 */ + { 11, 1, 0 }, /* RDR 26 */ + { 18, 1, 0 }, /* RDR 27 */ + { 128, 2, 0 }, /* RDR 28 */ + { 0, 0, 0 }, /* RDR 29 */ + { 16, 1, 0 }, /* RDR 30 */ + { 16, 1, 0 }, /* RDR 31 */ +}; + +/* RDR register descriptions for PCX-U */ +static struct rdr_tbl_ent perf_rdr_tbl_U[] = { + { 19, 1, 8 }, /* RDR 0 */ + { 32, 1, 16 }, /* RDR 1 */ + { 20, 1, 0 }, /* RDR 2 */ + { 0, 0, 0 }, /* RDR 3 */ + { 344, 6, 0 }, /* RDR 4 */ + { 176, 3, 0 }, /* RDR 5 */ + { 336, 6, 0 }, /* RDR 6 */ + { 0, 0, 0 }, /* RDR 7 */ + { 0, 0, 0 }, /* RDR 8 */ + { 0, 0, 0 }, /* RDR 9 */ + { 28, 1, 0 }, /* RDR 10 */ + { 33, 1, 0 }, /* RDR 11 */ + { 0, 0, 0 }, /* RDR 12 */ + { 230, 4, 0 }, /* RDR 13 */ + { 32, 1, 0 }, /* RDR 14 */ + { 128, 2, 0 }, /* RDR 15 */ + { 1494, 24, 0 }, /* RDR 16 */ + { 18, 1, 0 }, /* RDR 17 */ + { 4, 1, 0 }, /* RDR 18 */ + { 0, 0, 0 }, /* RDR 19 */ + { 158, 3, 24 }, /* RDR 20 */ + { 158, 3, 24 }, /* RDR 21 */ + { 194, 4, 48 }, /* RDR 22 */ + { 194, 4, 48 }, /* RDR 23 */ + { 71, 2, 0 }, /* RDR 24 */ + { 71, 2, 0 }, /* RDR 25 */ + { 28, 1, 0 }, /* RDR 26 */ + { 33, 1, 0 }, /* RDR 27 */ + { 88, 2, 0 }, /* RDR 28 */ + { 32, 1, 0 }, /* RDR 29 */ + { 24, 1, 0 }, /* RDR 30 */ + { 16, 1, 0 }, /* RDR 31 */ +}; + +/* + * A non-zero write_control in the above tables is a byte offset into + * this array. + */ +static uint64_t perf_bitmasks[] = { + 0x0000000000000000ul, /* first dbl word must be zero */ + 0xfdffe00000000000ul, /* RDR0 bitmask */ + 0x003f000000000000ul, /* RDR1 bitmask */ + 0x00fffffffffffffful, /* RDR20-RDR21 bitmask (152 bits) */ + 0xfffffffffffffffful, + 0xfffffffc00000000ul, + 0xfffffffffffffffful, /* RDR22-RDR23 bitmask (233 bits) */ + 0xfffffffffffffffful, + 0xfffffffffffffffcul, + 0xff00000000000000ul +}; + +/* + * Write control bitmasks for Pa-8700 processor given + * somethings have changed slightly. + */ +static uint64_t perf_bitmasks_piranha[] = { + 0x0000000000000000ul, /* first dbl word must be zero */ + 0xfdffe00000000000ul, /* RDR0 bitmask */ + 0x003f000000000000ul, /* RDR1 bitmask */ + 0x00fffffffffffffful, /* RDR20-RDR21 bitmask (158 bits) */ + 0xfffffffffffffffful, + 0xfffffffc00000000ul, + 0xfffffffffffffffful, /* RDR22-RDR23 bitmask (210 bits) */ + 0xfffffffffffffffful, + 0xfffffffffffffffful, + 0xfffc000000000000ul +}; + +static uint64_t *bitmask_array; /* array of bitmasks to use */ + +/****************************************************************************** + * Function Prototypes + *****************************************************************************/ +static int perf_config(uint32_t *image_ptr); +static int perf_release(struct inode *inode, struct file *file); +static int perf_open(struct inode *inode, struct file *file); +static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos); +static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, + loff_t *ppos); +static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg); +static void perf_start_counters(void); +static int perf_stop_counters(uint32_t *raddr); +static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num); +static int perf_rdr_read_ubuf(uint32_t rdr_num, uint64_t *buffer); +static int perf_rdr_clear(uint32_t rdr_num); +static int perf_write_image(uint64_t *memaddr); +static void perf_rdr_write(uint32_t rdr_num, uint64_t *buffer); + +/* External Assembly Routines */ +extern uint64_t perf_rdr_shift_in_W (uint32_t rdr_num, uint16_t width); +extern uint64_t perf_rdr_shift_in_U (uint32_t rdr_num, uint16_t width); +extern void perf_rdr_shift_out_W (uint32_t rdr_num, uint64_t buffer); +extern void perf_rdr_shift_out_U (uint32_t rdr_num, uint64_t buffer); +extern void perf_intrigue_enable_perf_counters (void); +extern void perf_intrigue_disable_perf_counters (void); + +/****************************************************************************** + * Function Definitions + *****************************************************************************/ + + +/* + * configure: + * + * Configure the cpu with a given data image. First turn off the counters, + * then download the image, then turn the counters back on. + */ +static int perf_config(uint32_t *image_ptr) +{ + long error; + uint32_t raddr[4]; + + /* Stop the counters*/ + error = perf_stop_counters(raddr); + if (error != 0) { + printk("perf_config: perf_stop_counters = %ld\n", error); + return -EINVAL; + } + +printk("Preparing to write image\n"); + /* Write the image to the chip */ + error = perf_write_image((uint64_t *)image_ptr); + if (error != 0) { + printk("perf_config: DOWNLOAD = %ld\n", error); + return -EINVAL; + } + +printk("Preparing to start counters\n"); + + /* Start the counters */ + perf_start_counters(); + + return sizeof(uint32_t); +} + +/* + * Open the device and initialize all of its memory. The device is only + * opened once, but can be "queried" by multiple processes that know its + * file descriptor. + */ +static int perf_open(struct inode *inode, struct file *file) +{ + spin_lock(&perf_lock); + if (perf_enabled) { + spin_unlock(&perf_lock); + return -EBUSY; + } + perf_enabled = 1; + spin_unlock(&perf_lock); + + return 0; +} + +/* + * Close the device. + */ +static int perf_release(struct inode *inode, struct file *file) +{ + spin_lock(&perf_lock); + perf_enabled = 0; + spin_unlock(&perf_lock); + + return 0; +} + +/* + * Read does nothing for this driver + */ +static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos) +{ + return 0; +} + +/* + * write: + * + * This routine downloads the image to the chip. It must be + * called on the processor that the download should happen + * on. + */ +static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, + loff_t *ppos) +{ + int err; + size_t image_size; + uint32_t image_type; + uint32_t interface_type; + uint32_t test; + + if (perf_processor_interface == ONYX_INTF) + image_size = PCXU_IMAGE_SIZE; + else if (perf_processor_interface == CUDA_INTF) + image_size = PCXW_IMAGE_SIZE; + else + return -EFAULT; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (count != sizeof(uint32_t)) + return -EIO; + + if ((err = copy_from_user(&image_type, buf, sizeof(uint32_t))) != 0) + return err; + + /* Get the interface type and test type */ + interface_type = (image_type >> 16) & 0xffff; + test = (image_type & 0xffff); + + /* Make sure everything makes sense */ + + /* First check the machine type is correct for + the requested image */ + if (((perf_processor_interface == CUDA_INTF) && + (interface_type != CUDA_INTF)) || + ((perf_processor_interface == ONYX_INTF) && + (interface_type != ONYX_INTF))) + return -EINVAL; + + /* Next check to make sure the requested image + is valid */ + if (((interface_type == CUDA_INTF) && + (test >= MAX_CUDA_IMAGES)) || + ((interface_type == ONYX_INTF) && + (test >= MAX_ONYX_IMAGES))) + return -EINVAL; + + /* Copy the image into the processor */ + if (interface_type == CUDA_INTF) + return perf_config(cuda_images[test]); + else + return perf_config(onyx_images[test]); + + return count; +} + +/* + * Patch the images that need to know the IVA addresses. + */ +static void perf_patch_images(void) +{ +#if 0 /* FIXME!! */ +/* + * NOTE: this routine is VERY specific to the current TLB image. + * If the image is changed, this routine might also need to be changed. + */ + extern void $i_itlb_miss_2_0(); + extern void $i_dtlb_miss_2_0(); + extern void PA2_0_iva(); + + /* + * We can only use the lower 32-bits, the upper 32-bits should be 0 + * anyway given this is in the kernel + */ + uint32_t itlb_addr = (uint32_t)&($i_itlb_miss_2_0); + uint32_t dtlb_addr = (uint32_t)&($i_dtlb_miss_2_0); + uint32_t IVAaddress = (uint32_t)&PA2_0_iva; + + if (perf_processor_interface == ONYX_INTF) { + /* clear last 2 bytes */ + onyx_images[TLBMISS][15] &= 0xffffff00; + /* set 2 bytes */ + onyx_images[TLBMISS][15] |= (0x000000ff&((dtlb_addr) >> 24)); + onyx_images[TLBMISS][16] = (dtlb_addr << 8)&0xffffff00; + onyx_images[TLBMISS][17] = itlb_addr; + + /* clear last 2 bytes */ + onyx_images[TLBHANDMISS][15] &= 0xffffff00; + /* set 2 bytes */ + onyx_images[TLBHANDMISS][15] |= (0x000000ff&((dtlb_addr) >> 24)); + onyx_images[TLBHANDMISS][16] = (dtlb_addr << 8)&0xffffff00; + onyx_images[TLBHANDMISS][17] = itlb_addr; + + /* clear last 2 bytes */ + onyx_images[BIG_CPI][15] &= 0xffffff00; + /* set 2 bytes */ + onyx_images[BIG_CPI][15] |= (0x000000ff&((dtlb_addr) >> 24)); + onyx_images[BIG_CPI][16] = (dtlb_addr << 8)&0xffffff00; + onyx_images[BIG_CPI][17] = itlb_addr; + + onyx_images[PANIC][15] &= 0xffffff00; /* clear last 2 bytes */ + onyx_images[PANIC][15] |= (0x000000ff&((IVAaddress) >> 24)); /* set 2 bytes */ + onyx_images[PANIC][16] = (IVAaddress << 8)&0xffffff00; + + + } else if (perf_processor_interface == CUDA_INTF) { + /* Cuda interface */ + cuda_images[TLBMISS][16] = + (cuda_images[TLBMISS][16]&0xffff0000) | + ((dtlb_addr >> 8)&0x0000ffff); + cuda_images[TLBMISS][17] = + ((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff); + cuda_images[TLBMISS][18] = (itlb_addr << 16)&0xffff0000; + + cuda_images[TLBHANDMISS][16] = + (cuda_images[TLBHANDMISS][16]&0xffff0000) | + ((dtlb_addr >> 8)&0x0000ffff); + cuda_images[TLBHANDMISS][17] = + ((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff); + cuda_images[TLBHANDMISS][18] = (itlb_addr << 16)&0xffff0000; + + cuda_images[BIG_CPI][16] = + (cuda_images[BIG_CPI][16]&0xffff0000) | + ((dtlb_addr >> 8)&0x0000ffff); + cuda_images[BIG_CPI][17] = + ((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff); + cuda_images[BIG_CPI][18] = (itlb_addr << 16)&0xffff0000; + } else { + /* Unknown type */ + } +#endif +} + + +/* + * ioctl routine + * All routines effect the processor that they are executed on. Thus you + * must be running on the processor that you wish to change. + */ + +static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + long error_start; + uint32_t raddr[4]; + + switch (cmd) { + + case PA_PERF_ON: + /* Start the counters */ + perf_start_counters(); + return 0; + + case PA_PERF_OFF: + error_start = perf_stop_counters(raddr); + if (error_start != 0) { + printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start); + return -EFAULT; + } + + /* copy out the Counters */ + if (copy_to_user((void __user *)arg, raddr, + sizeof (raddr)) != 0) { + return -EFAULT; + } + return 0; + + case PA_PERF_VERSION: + /* Return the version # */ + return put_user(PERF_VERSION, (int *)arg); + + default: + break; + } + return -ENOTTY; +} + +static struct file_operations perf_fops = { + .llseek = no_llseek, + .read = perf_read, + .write = perf_write, + .ioctl = perf_ioctl, + .open = perf_open, + .release = perf_release +}; + +static struct miscdevice perf_dev = { + MISC_DYNAMIC_MINOR, + PA_PERF_DEV, + &perf_fops +}; + +/* + * Initialize the module + */ +static int __init perf_init(void) +{ + int ret; + + /* Determine correct processor interface to use */ + bitmask_array = perf_bitmasks; + + if (boot_cpu_data.cpu_type == pcxu || + boot_cpu_data.cpu_type == pcxu_) { + perf_processor_interface = ONYX_INTF; + } else if (boot_cpu_data.cpu_type == pcxw || + boot_cpu_data.cpu_type == pcxw_ || + boot_cpu_data.cpu_type == pcxw2 || + boot_cpu_data.cpu_type == mako) { + perf_processor_interface = CUDA_INTF; + if (boot_cpu_data.cpu_type == pcxw2 || + boot_cpu_data.cpu_type == mako) + bitmask_array = perf_bitmasks_piranha; + } else { + perf_processor_interface = UNKNOWN_INTF; + printk("Performance monitoring counters not supported on this processor\n"); + return -ENODEV; + } + + ret = misc_register(&perf_dev); + if (ret) { + printk(KERN_ERR "Performance monitoring counters: " + "cannot register misc device.\n"); + return ret; + } + + /* Patch the images to match the system */ + perf_patch_images(); + + spin_lock_init(&perf_lock); + + /* TODO: this only lets us access the first cpu.. what to do for SMP? */ + cpu_device = cpu_data[0].dev; + printk("Performance monitoring counters enabled for %s\n", + cpu_data[0].dev->name); + + return 0; +} + +/* + * perf_start_counters(void) + * + * Start the counters. + */ +static void perf_start_counters(void) +{ + /* Enable performance monitor counters */ + perf_intrigue_enable_perf_counters(); +} + +/* + * perf_stop_counters + * + * Stop the performance counters and save counts + * in a per_processor array. + */ +static int perf_stop_counters(uint32_t *raddr) +{ + uint64_t userbuf[MAX_RDR_WORDS]; + + /* Disable performance counters */ + perf_intrigue_disable_perf_counters(); + + if (perf_processor_interface == ONYX_INTF) { + uint64_t tmp64; + /* + * Read the counters + */ + if (!perf_rdr_read_ubuf(16, userbuf)) + return -13; + + /* Counter0 is bits 1398 thru 1429 */ + tmp64 = (userbuf[21] << 22) & 0x00000000ffc00000; + tmp64 |= (userbuf[22] >> 42) & 0x00000000003fffff; + /* OR sticky0 (bit 1430) to counter0 bit 32 */ + tmp64 |= (userbuf[22] >> 10) & 0x0000000080000000; + raddr[0] = (uint32_t)tmp64; + + /* Counter1 is bits 1431 thru 1462 */ + tmp64 = (userbuf[22] >> 9) & 0x00000000ffffffff; + /* OR sticky1 (bit 1463) to counter1 bit 32 */ + tmp64 |= (userbuf[22] << 23) & 0x0000000080000000; + raddr[1] = (uint32_t)tmp64; + + /* Counter2 is bits 1464 thru 1495 */ + tmp64 = (userbuf[22] << 24) & 0x00000000ff000000; + tmp64 |= (userbuf[23] >> 40) & 0x0000000000ffffff; + /* OR sticky2 (bit 1496) to counter2 bit 32 */ + tmp64 |= (userbuf[23] >> 8) & 0x0000000080000000; + raddr[2] = (uint32_t)tmp64; + + /* Counter3 is bits 1497 thru 1528 */ + tmp64 = (userbuf[23] >> 7) & 0x00000000ffffffff; + /* OR sticky3 (bit 1529) to counter3 bit 32 */ + tmp64 |= (userbuf[23] << 25) & 0x0000000080000000; + raddr[3] = (uint32_t)tmp64; + + /* + * Zero out the counters + */ + + /* + * The counters and sticky-bits comprise the last 132 bits + * (1398 - 1529) of RDR16 on a U chip. We'll zero these + * out the easy way: zero out last 10 bits of dword 21, + * all of dword 22 and 58 bits (plus 6 don't care bits) of + * dword 23. + */ + userbuf[21] &= 0xfffffffffffffc00ul; /* 0 to last 10 bits */ + userbuf[22] = 0; + userbuf[23] = 0; + + /* + * Write back the zero'ed bytes + the image given + * the read was destructive. + */ + perf_rdr_write(16, userbuf); + } else { + + /* + * Read RDR-15 which contains the counters and sticky bits + */ + if (!perf_rdr_read_ubuf(15, userbuf)) { + return -13; + } + + /* + * Clear out the counters + */ + perf_rdr_clear(15); + + /* + * Copy the counters + */ + raddr[0] = (uint32_t)((userbuf[0] >> 32) & 0x00000000ffffffffUL); + raddr[1] = (uint32_t)(userbuf[0] & 0x00000000ffffffffUL); + raddr[2] = (uint32_t)((userbuf[1] >> 32) & 0x00000000ffffffffUL); + raddr[3] = (uint32_t)(userbuf[1] & 0x00000000ffffffffUL); + } + + return 0; +} + +/* + * perf_rdr_get_entry + * + * Retrieve a pointer to the description of what this + * RDR contains. + */ +static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num) +{ + if (perf_processor_interface == ONYX_INTF) { + return &perf_rdr_tbl_U[rdr_num]; + } else { + return &perf_rdr_tbl_W[rdr_num]; + } +} + +/* + * perf_rdr_read_ubuf + * + * Read the RDR value into the buffer specified. + */ +static int perf_rdr_read_ubuf(uint32_t rdr_num, uint64_t *buffer) +{ + uint64_t data, data_mask = 0; + uint32_t width, xbits, i; + struct rdr_tbl_ent *tentry; + + tentry = perf_rdr_get_entry(rdr_num); + if ((width = tentry->width) == 0) + return 0; + + /* Clear out buffer */ + i = tentry->num_words; + while (i--) { + buffer[i] = 0; + } + + /* Check for bits an even number of 64 */ + if ((xbits = width & 0x03f) != 0) { + data_mask = 1; + data_mask <<= (64 - xbits); + data_mask--; + } + + /* Grab all of the data */ + i = tentry->num_words; + while (i--) { + + if (perf_processor_interface == ONYX_INTF) { + data = perf_rdr_shift_in_U(rdr_num, width); + } else { + data = perf_rdr_shift_in_W(rdr_num, width); + } + if (xbits) { + buffer[i] |= (data << (64 - xbits)); + if (i) { + buffer[i-1] |= ((data >> xbits) & data_mask); + } + } else { + buffer[i] = data; + } + } + + return 1; +} + +/* + * perf_rdr_clear + * + * Zero out the given RDR register + */ +static int perf_rdr_clear(uint32_t rdr_num) +{ + struct rdr_tbl_ent *tentry; + int32_t i; + + tentry = perf_rdr_get_entry(rdr_num); + + if (tentry->width == 0) { + return -1; + } + + i = tentry->num_words; + while (i--) { + if (perf_processor_interface == ONYX_INTF) { + perf_rdr_shift_out_U(rdr_num, 0UL); + } else { + perf_rdr_shift_out_W(rdr_num, 0UL); + } + } + + return 0; +} + + +/* + * perf_write_image + * + * Write the given image out to the processor + */ +static int perf_write_image(uint64_t *memaddr) +{ + uint64_t buffer[MAX_RDR_WORDS]; + uint64_t *bptr; + uint32_t dwords; + uint32_t *intrigue_rdr; + uint64_t *intrigue_bitmask, tmp64, proc_hpa; + struct rdr_tbl_ent *tentry; + int i; + + /* Clear out counters */ + if (perf_processor_interface == ONYX_INTF) { + + perf_rdr_clear(16); + + /* Toggle performance monitor */ + perf_intrigue_enable_perf_counters(); + perf_intrigue_disable_perf_counters(); + + intrigue_rdr = perf_rdrs_U; + } else { + perf_rdr_clear(15); + intrigue_rdr = perf_rdrs_W; + } + + /* Write all RDRs */ + while (*intrigue_rdr != -1) { + tentry = perf_rdr_get_entry(*intrigue_rdr); + perf_rdr_read_ubuf(*intrigue_rdr, buffer); + bptr = &buffer[0]; + dwords = tentry->num_words; + if (tentry->write_control) { + intrigue_bitmask = &bitmask_array[tentry->write_control >> 3]; + while (dwords--) { + tmp64 = *intrigue_bitmask & *memaddr++; + tmp64 |= (~(*intrigue_bitmask++)) & *bptr; + *bptr++ = tmp64; + } + } else { + while (dwords--) { + *bptr++ = *memaddr++; + } + } + + perf_rdr_write(*intrigue_rdr, buffer); + intrigue_rdr++; + } + + /* + * Now copy out the Runway stuff which is not in RDRs + */ + + if (cpu_device == NULL) + { + printk(KERN_ERR "write_image: cpu_device not yet initialized!\n"); + return -1; + } + + proc_hpa = cpu_device->hpa; + + /* Merge intrigue bits into Runway STATUS 0 */ + tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + + /* Write RUNWAY DEBUG registers */ + for (i = 0; i < 8; i++) { + __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + } + + return 0; +} + +/* + * perf_rdr_write + * + * Write the given RDR register with the contents + * of the given buffer. + */ +static void perf_rdr_write(uint32_t rdr_num, uint64_t *buffer) +{ + struct rdr_tbl_ent *tentry; + int32_t i; + +printk("perf_rdr_write\n"); + tentry = perf_rdr_get_entry(rdr_num); + if (tentry->width == 0) { return; } + + i = tentry->num_words; + while (i--) { + if (perf_processor_interface == ONYX_INTF) { + perf_rdr_shift_out_U(rdr_num, buffer[i]); + } else { + perf_rdr_shift_out_W(rdr_num, buffer[i]); + } + } +printk("perf_rdr_write done\n"); +} + +module_init(perf_init); diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S new file mode 100644 index 000000000000..adb3c6444910 --- /dev/null +++ b/arch/parisc/kernel/perf_asm.S @@ -0,0 +1,1691 @@ + +/* low-level asm for "intrigue" (PA8500-8700 CPU perf counters) + * + * Copyright (C) 2001 Randolph Chung + * Copyright (C) 2001 Hewlett-Packard (Grant Grundler) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#ifdef CONFIG_64BIT + .level 2.0w +#endif /* CONFIG_64BIT */ + +#define MTDIAG_1(gr) .word 0x14201840 + gr*0x10000 +#define MTDIAG_2(gr) .word 0x14401840 + gr*0x10000 +#define MFDIAG_1(gr) .word 0x142008A0 + gr +#define MFDIAG_2(gr) .word 0x144008A0 + gr +#define STDIAG(dr) .word 0x14000AA0 + dr*0x200000 +#define SFDIAG(dr) .word 0x14000BA0 + dr*0x200000 +#define DR2_SLOW_RET 53 + + +; +; Enable the performance counters +; +; The coprocessor only needs to be enabled when +; starting/stopping the coprocessor with the pmenb/pmdis. +; + .text + .align 32 + + .export perf_intrigue_enable_perf_counters,code +perf_intrigue_enable_perf_counters: + .proc + .callinfo frame=0,NO_CALLS + .entry + + ldi 0x20,%r25 ; load up perfmon bit + mfctl ccr,%r26 ; get coprocessor register + or %r25,%r26,%r26 ; set bit + mtctl %r26,ccr ; turn on performance coprocessor + pmenb ; enable performance monitor + ssm 0,0 ; dummy op to ensure completion + sync ; follow ERS + andcm %r26,%r25,%r26 ; clear bit now + mtctl %r26,ccr ; turn off performance coprocessor + nop ; NOPs as specified in ERS + nop + nop + nop + nop + nop + nop + bve (%r2) + nop + .exit + .procend + + .export perf_intrigue_disable_perf_counters,code +perf_intrigue_disable_perf_counters: + .proc + .callinfo frame=0,NO_CALLS + .entry + ldi 0x20,%r25 ; load up perfmon bit + mfctl ccr,%r26 ; get coprocessor register + or %r25,%r26,%r26 ; set bit + mtctl %r26,ccr ; turn on performance coprocessor + pmdis ; disable performance monitor + ssm 0,0 ; dummy op to ensure completion + andcm %r26,%r25,%r26 ; clear bit now + bve (%r2) + mtctl %r26,ccr ; turn off performance coprocessor + .exit + .procend + +;*********************************************************************** +;* +;* Name: perf_rdr_shift_in_W +;* +;* Description: +;* This routine shifts data in from the RDR in arg0 and returns +;* the result in ret0. If the RDR is <= 64 bits in length, it +;* is shifted shifted backup immediately. This is to compensate +;* for RDR10 which has bits that preclude PDC stack operations +;* when they are in the wrong state. +;* +;* Arguments: +;* arg0 : rdr to be read +;* arg1 : bit length of rdr +;* +;* Returns: +;* ret0 = next 64 bits of rdr data from staging register +;* +;* Register usage: +;* arg0 : rdr to be read +;* arg1 : bit length of rdr +;* %r24 - original DR2 value +;* %r1 - scratch +;* %r29 - scratch +;* +;* Returns: +;* ret0 = RDR data (right justified) +;* +;*********************************************************************** + + .export perf_rdr_shift_in_W,code +perf_rdr_shift_in_W: + .proc + .callinfo frame=0,NO_CALLS + .entry +; +; read(shift in) the RDR. +; + +; NOTE: The PCX-W ERS states that DR2_SLOW_RET must be set before any +; shifting is done, from or to, remote diagnose registers. +; + + depdi,z 1,DR2_SLOW_RET,1,%r29 + MFDIAG_2 (24) + or %r24,%r29,%r29 + MTDIAG_2 (29) ; set DR2_SLOW_RET + + nop + nop + nop + nop + +; +; Cacheline start (32-byte cacheline) +; + nop + nop + nop + extrd,u arg1,63,6,%r1 ; setup shift amount by bits to move + + mtsar %r1 + shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number + blr %r1,%r0 ; branch to 8-instruction sequence + nop + +; +; Cacheline start (32-byte cacheline) +; + + ; + ; RDR 0 sequence + ; + SFDIAG (0) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) ; mtdiag %dr1, %r1 + STDIAG (0) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 1 sequence + ; + sync + ssm 0,0 + SFDIAG (1) + ssm 0,0 + MFDIAG_1 (28) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + nop + + ; + ; RDR 2 read sequence + ; + SFDIAG (2) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (2) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 3 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 4 read sequence + ; + sync + ssm 0,0 + SFDIAG (4) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 5 read sequence + ; + sync + ssm 0,0 + SFDIAG (5) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 6 read sequence + ; + sync + ssm 0,0 + SFDIAG (6) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 7 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 8 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 9 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 10 read sequence + ; + SFDIAG (10) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (10) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 11 read sequence + ; + SFDIAG (11) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (11) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 12 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 13 read sequence + ; + sync + ssm 0,0 + SFDIAG (13) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 14 read sequence + ; + SFDIAG (14) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (14) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 15 read sequence + ; + sync + ssm 0,0 + SFDIAG (15) + ssm 0,0 + MFDIAG_1 (28) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + nop + + ; + ; RDR 16 read sequence + ; + sync + ssm 0,0 + SFDIAG (16) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 17 read sequence + ; + SFDIAG (17) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (17) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 18 read sequence + ; + SFDIAG (18) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (18) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 19 read sequence + ; + b,n perf_rdr_shift_in_W_leave + nop + nop + nop + nop + nop + nop + nop + + ; + ; RDR 20 read sequence + ; + sync + ssm 0,0 + SFDIAG (20) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 21 read sequence + ; + sync + ssm 0,0 + SFDIAG (21) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 22 read sequence + ; + sync + ssm 0,0 + SFDIAG (22) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 23 read sequence + ; + sync + ssm 0,0 + SFDIAG (23) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 24 read sequence + ; + sync + ssm 0,0 + SFDIAG (24) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 25 read sequence + ; + sync + ssm 0,0 + SFDIAG (25) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 26 read sequence + ; + SFDIAG (26) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (26) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 27 read sequence + ; + SFDIAG (27) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (27) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 28 read sequence + ; + sync + ssm 0,0 + SFDIAG (28) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 29 read sequence + ; + sync + ssm 0,0 + SFDIAG (29) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_W_leave + ssm 0,0 + nop + + ; + ; RDR 30 read sequence + ; + SFDIAG (30) + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (30) + ssm 0,0 + b,n perf_rdr_shift_in_W_leave + + ; + ; RDR 31 read sequence + ; + sync + ssm 0,0 + SFDIAG (31) + ssm 0,0 + MFDIAG_1 (28) + nop + ssm 0,0 + nop + + ; + ; Fallthrough + ; + +perf_rdr_shift_in_W_leave: + bve (%r2) + .exit + MTDIAG_2 (24) ; restore DR2 + .procend + + +;*********************************************************************** +;* +;* Name: perf_rdr_shift_out_W +;* +;* Description: +;* This routine moves data to the RDR's. The double-word that +;* arg1 points to is loaded and moved into the staging register. +;* Then the STDIAG instruction for the RDR # in arg0 is called +;* to move the data to the RDR. +;* +;* Arguments: +;* arg0 = rdr number +;* arg1 = 64-bit value to write +;* %r24 - DR2 | DR2_SLOW_RET +;* %r23 - original DR2 value +;* +;* Returns: +;* None +;* +;* Register usage: +;* +;*********************************************************************** + + .export perf_rdr_shift_out_W,code +perf_rdr_shift_out_W: + .proc + .callinfo frame=0,NO_CALLS + .entry +; +; NOTE: The PCX-W ERS states that DR2_SLOW_RET must be set before any +; shifting is done, from or to, the remote diagnose registers. +; + + depdi,z 1,DR2_SLOW_RET,1,%r24 + MFDIAG_2 (23) + or %r24,%r23,%r24 + MTDIAG_2 (24) ; set DR2_SLOW_RET + MTDIAG_1 (25) ; data to the staging register + shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number + blr %r1,%r0 ; branch to 8-instruction sequence + nop + + ; + ; RDR 0 write sequence + ; + sync ; RDR 0 write sequence + ssm 0,0 + STDIAG (0) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 1 write sequence + ; + sync + ssm 0,0 + STDIAG (1) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 2 write sequence + ; + sync + ssm 0,0 + STDIAG (2) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 3 write sequence + ; + sync + ssm 0,0 + STDIAG (3) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 4 write sequence + ; + sync + ssm 0,0 + STDIAG (4) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 5 write sequence + ; + sync + ssm 0,0 + STDIAG (5) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 6 write sequence + ; + sync + ssm 0,0 + STDIAG (6) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 7 write sequence + ; + sync + ssm 0,0 + STDIAG (7) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 8 write sequence + ; + sync + ssm 0,0 + STDIAG (8) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 9 write sequence + ; + sync + ssm 0,0 + STDIAG (9) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 10 write sequence + ; + sync + ssm 0,0 + STDIAG (10) + STDIAG (26) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + ssm 0,0 + nop + + ; + ; RDR 11 write sequence + ; + sync + ssm 0,0 + STDIAG (11) + STDIAG (27) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + ssm 0,0 + nop + + ; + ; RDR 12 write sequence + ; + sync + ssm 0,0 + STDIAG (12) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 13 write sequence + ; + sync + ssm 0,0 + STDIAG (13) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 14 write sequence + ; + sync + ssm 0,0 + STDIAG (14) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 15 write sequence + ; + sync + ssm 0,0 + STDIAG (15) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 16 write sequence + ; + sync + ssm 0,0 + STDIAG (16) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 17 write sequence + ; + sync + ssm 0,0 + STDIAG (17) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 18 write sequence + ; + sync + ssm 0,0 + STDIAG (18) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 19 write sequence + ; + sync + ssm 0,0 + STDIAG (19) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 20 write sequence + ; + sync + ssm 0,0 + STDIAG (20) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 21 write sequence + ; + sync + ssm 0,0 + STDIAG (21) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 22 write sequence + ; + sync + ssm 0,0 + STDIAG (22) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 23 write sequence + ; + sync + ssm 0,0 + STDIAG (23) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 24 write sequence + ; + sync + ssm 0,0 + STDIAG (24) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 25 write sequence + ; + sync + ssm 0,0 + STDIAG (25) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 26 write sequence + ; + sync + ssm 0,0 + STDIAG (10) + STDIAG (26) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + ssm 0,0 + nop + + ; + ; RDR 27 write sequence + ; + sync + ssm 0,0 + STDIAG (11) + STDIAG (27) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + ssm 0,0 + nop + + ; + ; RDR 28 write sequence + ; + sync + ssm 0,0 + STDIAG (28) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 29 write sequence + ; + sync + ssm 0,0 + STDIAG (29) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 30 write sequence + ; + sync + ssm 0,0 + STDIAG (30) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + + ; + ; RDR 31 write sequence + ; + sync + ssm 0,0 + STDIAG (31) + ssm 0,0 + b,n perf_rdr_shift_out_W_leave + nop + ssm 0,0 + nop + +perf_rdr_shift_out_W_leave: + bve (%r2) + .exit + MTDIAG_2 (23) ; restore DR2 + .procend + + +;*********************************************************************** +;* +;* Name: rdr_shift_in_U +;* +;* Description: +;* This routine shifts data in from the RDR in arg0 and returns +;* the result in ret0. If the RDR is <= 64 bits in length, it +;* is shifted shifted backup immediately. This is to compensate +;* for RDR10 which has bits that preclude PDC stack operations +;* when they are in the wrong state. +;* +;* Arguments: +;* arg0 : rdr to be read +;* arg1 : bit length of rdr +;* +;* Returns: +;* ret0 = next 64 bits of rdr data from staging register +;* +;* Register usage: +;* arg0 : rdr to be read +;* arg1 : bit length of rdr +;* %r24 - original DR2 value +;* %r23 - DR2 | DR2_SLOW_RET +;* %r1 - scratch +;* +;*********************************************************************** + + .export perf_rdr_shift_in_U,code +perf_rdr_shift_in_U: + .proc + .callinfo frame=0,NO_CALLS + .entry + +; read(shift in) the RDR. +; +; NOTE: The PCX-U ERS states that DR2_SLOW_RET must be set before any +; shifting is done, from or to, remote diagnose registers. + + depdi,z 1,DR2_SLOW_RET,1,%r29 + MFDIAG_2 (24) + or %r24,%r29,%r29 + MTDIAG_2 (29) ; set DR2_SLOW_RET + + nop + nop + nop + nop + +; +; Start of next 32-byte cacheline +; + nop + nop + nop + extrd,u arg1,63,6,%r1 + + mtsar %r1 + shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number + blr %r1,%r0 ; branch to 8-instruction sequence + nop + +; +; Start of next 32-byte cacheline +; + SFDIAG (0) ; RDR 0 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (0) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (1) ; RDR 1 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (1) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + sync ; RDR 2 read sequence + ssm 0,0 + SFDIAG (4) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 3 read sequence + ssm 0,0 + SFDIAG (3) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 4 read sequence + ssm 0,0 + SFDIAG (4) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 5 read sequence + ssm 0,0 + SFDIAG (5) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 6 read sequence + ssm 0,0 + SFDIAG (6) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 7 read sequence + ssm 0,0 + SFDIAG (7) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + b,n perf_rdr_shift_in_U_leave + nop + nop + nop + nop + nop + nop + nop + + SFDIAG (9) ; RDR 9 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (9) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (10) ; RDR 10 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (10) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (11) ; RDR 11 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (11) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (12) ; RDR 12 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (12) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (13) ; RDR 13 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (13) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (14) ; RDR 14 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (14) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (15) ; RDR 15 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (15) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + sync ; RDR 16 read sequence + ssm 0,0 + SFDIAG (16) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + SFDIAG (17) ; RDR 17 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (17) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (18) ; RDR 18 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (18) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + b,n perf_rdr_shift_in_U_leave + nop + nop + nop + nop + nop + nop + nop + + sync ; RDR 20 read sequence + ssm 0,0 + SFDIAG (20) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 21 read sequence + ssm 0,0 + SFDIAG (21) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 22 read sequence + ssm 0,0 + SFDIAG (22) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 23 read sequence + ssm 0,0 + SFDIAG (23) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 24 read sequence + ssm 0,0 + SFDIAG (24) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + sync ; RDR 25 read sequence + ssm 0,0 + SFDIAG (25) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + SFDIAG (26) ; RDR 26 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (26) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (27) ; RDR 27 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (27) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + sync ; RDR 28 read sequence + ssm 0,0 + SFDIAG (28) + ssm 0,0 + MFDIAG_1 (28) + b,n perf_rdr_shift_in_U_leave + ssm 0,0 + nop + + b,n perf_rdr_shift_in_U_leave + nop + nop + nop + nop + nop + nop + nop + + SFDIAG (30) ; RDR 30 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (30) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + + SFDIAG (31) ; RDR 31 read sequence + ssm 0,0 + MFDIAG_1 (28) + shrpd ret0,%r0,%sar,%r1 + MTDIAG_1 (1) + STDIAG (31) + ssm 0,0 + b,n perf_rdr_shift_in_U_leave + nop + +perf_rdr_shift_in_U_leave: + bve (%r2) + .exit + MTDIAG_2 (24) ; restore DR2 + .procend + +;*********************************************************************** +;* +;* Name: rdr_shift_out_U +;* +;* Description: +;* This routine moves data to the RDR's. The double-word that +;* arg1 points to is loaded and moved into the staging register. +;* Then the STDIAG instruction for the RDR # in arg0 is called +;* to move the data to the RDR. +;* +;* Arguments: +;* arg0 = rdr target +;* arg1 = buffer pointer +;* +;* Returns: +;* None +;* +;* Register usage: +;* arg0 = rdr target +;* arg1 = buffer pointer +;* %r24 - DR2 | DR2_SLOW_RET +;* %r23 - original DR2 value +;* +;*********************************************************************** + + .export perf_rdr_shift_out_U,code +perf_rdr_shift_out_U: + .proc + .callinfo frame=0,NO_CALLS + .entry + +; +; NOTE: The PCX-U ERS states that DR2_SLOW_RET must be set before any +; shifting is done, from or to, the remote diagnose registers. +; + + depdi,z 1,DR2_SLOW_RET,1,%r24 + MFDIAG_2 (23) + or %r24,%r23,%r24 + MTDIAG_2 (24) ; set DR2_SLOW_RET + + MTDIAG_1 (25) ; data to the staging register + shladd arg0,2,%r0,%r1 ; %r1 = 4 * RDR number + blr %r1,%r0 ; branch to 8-instruction sequence + nop + +; +; 32-byte cachline aligned +; + + sync ; RDR 0 write sequence + ssm 0,0 + STDIAG (0) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 1 write sequence + ssm 0,0 + STDIAG (1) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 2 write sequence + ssm 0,0 + STDIAG (2) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 3 write sequence + ssm 0,0 + STDIAG (3) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 4 write sequence + ssm 0,0 + STDIAG (4) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 5 write sequence + ssm 0,0 + STDIAG (5) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 6 write sequence + ssm 0,0 + STDIAG (6) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 7 write sequence + ssm 0,0 + STDIAG (7) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 8 write sequence + ssm 0,0 + STDIAG (8) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 9 write sequence + ssm 0,0 + STDIAG (9) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 10 write sequence + ssm 0,0 + STDIAG (10) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 11 write sequence + ssm 0,0 + STDIAG (11) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 12 write sequence + ssm 0,0 + STDIAG (12) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 13 write sequence + ssm 0,0 + STDIAG (13) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 14 write sequence + ssm 0,0 + STDIAG (14) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 15 write sequence + ssm 0,0 + STDIAG (15) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 16 write sequence + ssm 0,0 + STDIAG (16) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 17 write sequence + ssm 0,0 + STDIAG (17) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 18 write sequence + ssm 0,0 + STDIAG (18) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 19 write sequence + ssm 0,0 + STDIAG (19) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 20 write sequence + ssm 0,0 + STDIAG (20) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 21 write sequence + ssm 0,0 + STDIAG (21) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 22 write sequence + ssm 0,0 + STDIAG (22) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 23 write sequence + ssm 0,0 + STDIAG (23) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 24 write sequence + ssm 0,0 + STDIAG (24) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 25 write sequence + ssm 0,0 + STDIAG (25) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 26 write sequence + ssm 0,0 + STDIAG (26) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 27 write sequence + ssm 0,0 + STDIAG (27) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 28 write sequence + ssm 0,0 + STDIAG (28) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 29 write sequence + ssm 0,0 + STDIAG (29) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 30 write sequence + ssm 0,0 + STDIAG (30) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + + sync ; RDR 31 write sequence + ssm 0,0 + STDIAG (31) + ssm 0,0 + b,n perf_rdr_shift_out_U_leave + nop + ssm 0,0 + nop + +perf_rdr_shift_out_U_leave: + bve (%r2) + .exit + MTDIAG_2 (23) ; restore DR2 + .procend + diff --git a/arch/parisc/kernel/perf_images.h b/arch/parisc/kernel/perf_images.h new file mode 100644 index 000000000000..d9562fe3f75c --- /dev/null +++ b/arch/parisc/kernel/perf_images.h @@ -0,0 +1,3138 @@ +/* + * Imagine for use with the Onyx (PCX-U) CPU interface + * + * Copyright (C) 2001 Randolph Chung + * Copyright (C) 2001 Hewlett-Packard (Grant Grundler) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef PERF_IMAGES_H +#define PERF_IMAGES_H + +/* Magic numbers taken without modification from HPUX stuff */ + +#define PCXU_IMAGE_SIZE 584 + +static uint32_t onyx_images[][PCXU_IMAGE_SIZE/sizeof(uint32_t)] = { +/* + * CPI: + * + * Counts the following: + * + * ctr0 : total cycles + * ctr1 : total cycles where nothing retired + * ctr2 : total instructions retired, including nullified + * ctr3 : total instructions retired, less nullified instructions + */ + { + 0x4c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x004e0004, 0x07ffffff, 0xffc01380, + 0x0101ffff, 0xfffff104, 0xe000c07f, 0xfffffffc, + 0x01380010, 0x1fffffff, 0xff000000, 0x00000000, + 0x00000fff, 0xff00000f, 0xffff0000, 0x0fffff00, + 0x000fffff, 0x00000000, 0x00000000, 0x00ffffff, + 0xfffff000, 0x0000000f, 0xffffffff, 0xff000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x6fffffff, 0xffffffff, + 0xfff55fff, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000030, 0x00003c00, 0x067f080c, 0x02019fc0, + 0x02804067, 0xf0009030, 0x19fc002c, 0x40067f08, + 0x0c12019f, 0xc0028440, 0x67f00091, 0x3019fc00, + 0x2fc007ff, 0xf800f001, 0xfffe003c, 0x007fff80, + 0x0f001fff, 0xe003c007, 0xfff800f0, 0x01fffe00, + 0x3c007fff, 0x800f001f, 0xffe003c0, 0x07fff800, + 0xf001fffe, 0x003c007f, 0xff800f00, 0x1fffe003, + 0xc007fff8, 0x00f001ff, 0xfe003c00, 0x7fff800f, + 0x001fffe0, 0x03c007ff, 0xf800f001, 0xfffe003c, + 0x007fff80, 0x0f001fff, 0xe003c007, 0xfff800f0, + 0x01fffe00, 0x3c007fff, 0x800f001f, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x6fff0000, 0x00000000, 0x60000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff}, + +/* Bus utilization image (bus_util) + * + * ctr0 : counts address valid cycles + * ctr1 : counts data valid cycles + * ctr2 : counts overflow from counter 0 + * ctr3 : counts overflow from counter 1 + */ + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xf0000000, + 0x0000000c, 0x00003c00, 0x07930000, 0x0041e4c0, + 0x01002079, 0x3000800c, 0x1e4c0030, 0x00279300, + 0x010049e4, 0xc0014022, 0x79300090, 0x0c9e4c00, + 0x34004793, 0x00020051, 0xe4c00180, 0x24793000, + 0xa00d1e4c, 0x00380067, 0x93000300, 0x59e4c001, + 0xc0267930, 0x00b00d9e, 0x4c003fff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffffc00, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffff0000, 0x00000000, 0xf0000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00100000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff }, + +/* + * TLB counts (same as tlbStats image): + * + * Counts the following: + * + * ctr0: DTLB misses + * ctr1: ITLB misses + * ctr2: total cycles in the miss handlers + * ctr3: total cycles + */ + + { + 0x0c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe7e7e0e0, 0x004e0004, 0x07ffffff, 0xffc01380, + 0x0101ffff, 0xfffff104, 0xe000c06a, 0xafffc85c, + 0x01380010, 0x1fffffff, 0xff000000, 0x00000000, + 0x01b9e000, 0x0001b8c0, 0x00000000, 0x0fffff00, + 0x000fffff, 0x00000000, 0x00000000, 0x00400000, + 0x00001000, 0x00000004, 0x00000000, 0x01000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x6fffffff, 0xffffffff, + 0xfff55ff5, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000000, 0x00003c00, 0x01ff0001, 0x08007fc2, + 0x02c1001f, 0xf0807100, 0x1bfc200c, 0x4806ff00, + 0x03f001ff, 0xfe003c00, 0x7fff800f, 0x001fffe0, + 0x03c007ff, 0xf800f001, 0xfffe003c, 0x007fff80, + 0x0f001fff, 0xe003c007, 0xfff800f0, 0x01fffe00, + 0x3c007fff, 0x800f001f, 0xffe003c0, 0x07fff800, + 0xf001fffe, 0x003c007f, 0xff800f00, 0x1fffe003, + 0xc007fff8, 0x00f001ff, 0xfe003c00, 0x7fff800f, + 0x001fffe0, 0x03c007ff, 0xf800f001, 0xfffe003c, + 0x007fff80, 0x0f001fff, 0xe003c007, 0xfff800f0, + 0x01fffe00, 0x3c007fff, 0x800f001f, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x6fff0000, 0x00000000, 0x60000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff }, + +/* tlbHandMiss + * + * ctr0: counts TLB misses + * ctr1: counts dmisses inside tlb miss handlers + * ctr2: counts cycles in the tlb miss handlers + * ctr3: counts overflows of ctr2 + */ +{ +0x1c00c000,00000000,0x00060000,00000000, +0xe7e7e0e0,0x004e0004,0x07ffffff,0xffc01380, +0x0101ffff,0xfffff104,0xe000c06a,0xafffc85c, +0x01380010,0x1fffffff,0xff000000,00000000, +0x01b9e000,0x0001b8c0,00000000,0x0fffff00, +0x000fffff,00000000,00000000,0x00400000, +0x00001000,0x00000004,00000000,0x01000000, +0x0000ffff,0xfffffff0,00000000,0x0fffffff, +0xffff0000,00000000,0x6fffffff,0xffffffff, +0xfff55ff5,0xffffffff,0xffffffff,0xf0000000, +0xf0000000,0x00003c00,0x01fd0000,0x08007f42, +0x0281001f,0xd080a100,0x19f42008,0x44067d08, +0x0612019f,0x400084c0,0x67d00060,0x0047f400, +0x042011fd,0x080b0404,0x7f4202c4,0x0167d080, +0x311059f4,0x201c4816,0x7d000313,0x059f4001, +0xfc007fff,0x800f001f,0xffe003c0,0x07fff800, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x6fff0000,00000000,0x60000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + +/* branch_taken image (ptkn image) + * + * ctr0: overflow for ctr1 + * ctr1: predicted taken branches, actually taken + * ctr2: all predicted taken branches (nullfied or not) + * ctr3: overflow for ctr2 + */ + + { + 0xcc01e000, 0x00000000, 0x00060000, 0x00000000, + 0xa08080a0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000000, 0x00003c00, 0x04f90000, 0x02013e40, + 0x0081004f, 0x90004060, 0x13e40018, 0x0024f900, + 0x0802093e, 0x40028102, 0x4f9000c0, 0x6093e400, + 0x380014f9, 0x00010205, 0x3e4000c1, 0x014f9000, + 0x506053e4, 0x001c0034, 0xf9000902, 0x0d3e4002, + 0xc1034f90, 0x00d060d3, 0xe4003fff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffffc00, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffff0000, 0x00000000, 0xf0000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff }, + +/* branch_nottaken (pntkn image) + * + * ctr0: overflow for ctr1 + * ctr1: counts branches predicted not-taken, but actually taken + * ctr2: counts all predictable branches predicted not-taken + * ctr3: overflow for ctr2 + */ +{ +0xcc01e000,00000000,0x00060000,00000000, +0xc0c0c0e0,0xffb1fffb,0xfff7ffff,0xffffffff, +0xffffffff,0xfffffffb,0x1fffbfff,0x7fffffff, +0xfcc7ffff,0xffdffffa,0x5f000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + + +/* imiss image + * + * ctr0 : counts imiss aligned on 0 + * ctr1 : counts imiss aligned on 4 + * ctr2 : counts imiss aligned on 8 + * ctr3 : counts imiss aligned on C + */ + { + 0x0c00c000, 0x00000000, 0x00010000, 0x00000000, + 0xe7ebedee, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x6fffffff, 0xffffffff, + 0xfff55fff, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000000, 0x00003c00, 0x007f0000, 0x01001fc0, + 0x00408007, 0xf0002030, 0x01fc000c, 0x10007f00, + 0x0405001f, 0xc0014180, 0x07f00060, 0x7001fc00, + 0x1c20007f, 0x00080900, 0x1fc00242, 0x8007f000, + 0xa0b001fc, 0x002c3000, 0x7f000c0d, 0x001fc003, + 0x438007f0, 0x00e0f001, 0xfc003fff, 0xfffff800, + 0xfffffffe, 0x003fffff, 0xff800fff, 0xffffe003, + 0xfffffff8, 0x00ffffff, 0xfe003fff, 0xffff800f, + 0xffffffe0, 0x03ffffff, 0xf800ffff, 0xfffe003f, + 0xffffff80, 0x0fffffff, 0xe003ffff, 0xfff800ff, + 0xfffffe00, 0x3fffffff, 0x800fffff, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x6fff0000, 0x00000000, 0x60000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff}, + +/* dmiss image + * + * ctr0 : counts cycles + * ctr1 : counts cycles where something retired + * ctr2 : counts dmisses + * ctr3 : (same as ctr2) + */ + { + 0x3c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x6fffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000000, 0x00003c04, 0x007f0009, 0x02001fc0, + 0x0280c007, 0xf000b040, 0x01fc0030, 0x14007f00, + 0x0d06001f, 0xc00381c0, 0x07f000f0, 0x8001fc00, + 0x2024007f, 0x00090a00, 0x1fc00282, 0xc007f000, + 0xb0c001fc, 0x00303400, 0x7f000d0e, 0x001fc003, + 0x83c007f0, 0x00f00001, 0xfc0023ff, 0xfffff800, + 0xfffffffe, 0x003fffff, 0xff800fff, 0xffffe003, + 0xfffffff8, 0x00ffffff, 0xfe003fff, 0xffff800f, + 0xffffffe0, 0x03ffffff, 0xf800ffff, 0xfffe003f, + 0xffffff80, 0x0fffffff, 0xe003ffff, 0xfff800ff, + 0xfffffe00, 0x3fffffff, 0x800fffff, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x6fff0000, 0x00000000, 0x60000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff }, + +/* dcmiss + * + * ctr0: counts store instructions retired + * ctr1: counts load instructions retired + * ctr2: counts dmisses + * ctr3: counts READ_SHARED_OR_PRIV and READ_PRIVATE transactions on Runway + */ +{ +0x2c90c000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x6fffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf00000e8,0x00003c02,0x00bf0001,0x02002fc0, +0x0080a00b,0xf0003040,0x02fc0010,0x1200bf00, +0x0506002f,0xc00181a0,0x0bf00070,0x8002fc00, +0x202200bf,0x00090a00,0x2fc00282,0xa00bf000, +0xb0c002fc,0x00303200,0xbf000d0e,0x002fc003, +0x83a00bf0,0x00ffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0x6fff0000,00000000,0x60000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0x55555555,0xd5555555, +0x55555555,0x75555555,0x5e1ffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0xf8000000,00000000, +00000000,00000000,0xf4000000,00000000, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +00000000,00000000,0x00ffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* big_cpi + * + * ctr0: counts total cycles + * ctr1: counts overflows of ctr0 (for greater than 32-bit values) + * ctr2: counts overflows of ctr3 (for greater than 32-bit values) + * ctr3: counts unnullified instructions retired + */ +{ +0x0c00c000,00000000,0x00060000,00000000, +0xe7e7e0e0,0x004e0004,0x07ffffff,0xffc01380, +0x0101ffff,0xfffff104,0xe000c06a,0xafffc85c, +0x01380010,0x1fffffff,0xff000000,00000000, +0x01b9e000,0x0001b8c0,00000000,0x0fffff00, +0x000fffff,00000000,00000000,0x00400000, +0x00001000,0x00000004,00000000,0x01000000, +0x0000ffff,0xfffffff0,00000000,0x0fffffff, +0xffff0000,00000000,0x6fffffff,0xffffffff, +0xfff55ff5,0xffffffff,0xffffffff,0xf0000000, +0xf0000010,0x00003c00,0x01760008,0x00025d80, +0x02800417,0x6000c001,0x25d80038,0x04017600, +0x0901025d,0x8002c044,0x176000d0,0x1125d800, +0x3c2001f6,0x08080400,0x7d820203,0x001f6080, +0x804027d8,0x20282009,0xf6080a0c,0x027d8202, +0x81041f60,0x80c08107,0xd8203030,0x41f6080c, +0x04127d82,0x0382049f,0x6080e0c1,0x27d82038, +0x4006f608,0x081011bd,0x82030400,0xef6080a1, +0x013bd820,0x384806f6,0x00081211,0xbd800304, +0x80ef6000,0xa1213bd8,0x003bc007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x6fff0000,00000000,0x60000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* big_ls + * + * ctr0:counts the total number of cycles for which local_stall_A1 is asserted. + * ctr1: is the overflow for counter 0. + * ctr2: counts IFLUSH_AV + * ctr3: is the overflow for counter 2. + */ +{ +0x0c000000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x0fffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +00000000,0x00029408,0x02f50002,0x0800bd40, +0x0202802f,0x5000a000,0x4bd40004,0x0812f500, +0x030804bd,0x40024281,0x2f5000b0,0x010bd400, +0x100842f5,0x00060810,0xbd400302,0x842f5000, +0xe0014bd4,0x00140852,0xf5000708,0x14bd4003, +0x42852f50,0x00ff001f,0xffe003c0,0x07fff800, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x0df70000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* br_abort + * + * ctr0: counts BRAD_STALLH + * ctr1: counts ONE_QUAD + * ctr2: counts BR0_ABRT + * ctr3: counts BR1_ABRT + */ +{ +0x0c002000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x1fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x1a250000,00000000,0x10000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + +/* isnt + * + * ctr0: counts the total number of cycles for which iside_notrans is asserted + * ctr1: counts the number of times iside_notrans is asserted for 1-4 cycles + * ctr2: counts the number of times iside_notrans is asserted for 5-7 cycles + * ctr3: counts the number of times iside_notrans is asserted for > 7 cycles + */ +{ +0x0c018000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xcfffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +00000000,0x00021c20,0x03ff0808,0x1800ffc4, +0x0204003f,0xf0004280,0x0ffc6020,0x8003ff00, +0x043800ff,0xc8020c00,0x3ff00044,0x800ffca0, +0x210003ff,0x00045800,0xffcc0214,0x003ff000, +0x26800ffc,0xe0218003,0xff000278,0x00ffd002, +0x1c003ff0,0x0028800f,0xfd002200,0x03ff0001, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0xcdff0000,00000000,0xc0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + +/* quadrant + * + * ctr0: Total number of instructions in quadrant 0 + * ctr1: Total number of instructions in quadrant 1 + * ctr2: Total number of instructions in quadrant 2 + * ctr3: Total number of instructions in quadrant 3 + * Works only with 32-bit + */ + + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x004e0004, 0x07ffffff, 0xffc01380, + 0x0101ffff, 0xfffff004, 0xe000407f, 0xfffffffc, + 0x01380010, 0x1fffffff, 0xff000000, 0x00000000, + 0x00000fff, 0xff00000f, 0xffff0000, 0x0fffff00, + 0x000fffff, 0x00000000, 0x00000000, 0x00ffffff, + 0xffcff000, 0x0000040f, 0xfffffffc, 0xff000000, + 0x0080ffff, 0xffffcff0, 0x0000000c, 0x0fffffff, + 0xfcff0000, 0x00000000, 0xffffffff, 0xffffffff, + 0xfff55ff5, 0x5fffffff, 0xffffffff, 0xf0000000, + 0xf00000f0, 0x00003c00, 0x007f0000, 0x01001fc0, + 0x00408007, 0xf0002030, 0x01fc000c, 0x10007f00, + 0x0405001f, 0xc0014180, 0x07f00060, 0x7001fc00, + 0x1c20007f, 0x00080900, 0x1fc00242, 0x8007f000, + 0xa0b001fc, 0x002c3000, 0x7f000c0d, 0x001fc003, + 0x438007f0, 0x00e0f001, 0xfc003fff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffffc00, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffff0000, 0x00000000, 0xf0000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff}, + +/* rw_pdfet (READ_PRIV transactions) + * + * ctr0: counts address valid cycles + * ctr1: counts *all* data valid cycles + * ctr2: is the overflow from counter 0 + * ctr3: is the overflow from counter 1 + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x0000000c,0x00003c00,0x07930000,0x0041e4c0, +0x01002079,0x3000800c,0x1e4c0030,0x00279300, +0x010049e4,0xc0014022,0x79300090,0x0c9e4c00, +0x34004793,0x00020051,0xe4c00180,0x24793000, +0xa00d1e4c,0x00380067,0x93000300,0x59e4c001, +0xc0267930,0x00b00d9e,0x4c003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0xf8000000,00000000, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff}, + +/* rw_wdfet (WRITEBACKS) + * + * ctr0: counts address valid cycles + * ctr1: counts *all* data valid cycles + * ctr2: is the overflow from counter 0 + * ctr3: is the overflow from counter 1 + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x0000000c,0x00003c00,0x07930000,0x0041e4c0, +0x01002079,0x3000800c,0x1e4c0030,0x00279300, +0x010049e4,0xc0014022,0x79300090,0x0c9e4c00, +0x34004793,0x00020051,0xe4c00180,0x24793000, +0xa00d1e4c,0x00380067,0x93000300,0x59e4c001, +0xc0267930,0x00b00d9e,0x4c003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0x98000000,00000000, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff}, + +/* shlib_cpi + * + * ctr0: Total number of instructions in quad 0 + * ctr1: Total number of CPU clock cycles in quad 0 + * ctr2: total instructions without nullified + * ctr3: total number of CPU clock cycles + */ + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x004e0004, 0x07ffffff, 0xffc01380, + 0x0101ffff, 0xfffff004, 0xe000407f, 0xfffffffc, + 0x01380010, 0x1fffffff, 0xff000000, 0x00000000, + 0x00000fff, 0xff00000f, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0x00000000, 0x00ffffff, + 0xffcff000, 0x0000000f, 0xfffffffc, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0xffffffff, 0xffffffff, + 0xfff77ff5, 0x7fffffff, 0xffffffff, 0xf0000000, + 0xf00000a0, 0x00003c00, 0x01ff0005, 0x08007fc0, + 0x03c1001f, 0xf08030c0, 0x07fc203c, 0x4001ff08, + 0x0118007f, 0xc003c500, 0x1ff08031, 0xc007fc00, + 0x3fffffff, 0xf800ffff, 0xfffe003f, 0xffffff80, + 0x0fffffff, 0xe003ffff, 0xfff800ff, 0xfffffe00, + 0x3fffffff, 0x800fffff, 0xffe003ff, 0xfffff800, + 0xfffffffe, 0x003fffff, 0xff800fff, 0xffffe003, + 0xfffffff8, 0x00ffffff, 0xfe003fff, 0xffff800f, + 0xffffffe0, 0x03ffffff, 0xf800ffff, 0xfffe003f, + 0xffffff80, 0x0fffffff, 0xe003ffff, 0xfff800ff, + 0xfffffe00, 0x3fffffff, 0x800fffff, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffff0000, 0x00000000, 0xf0000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff}, + + +/* addr_inv_abort_alu + * + * ctr0: counts ABORT_ALU0L + * ctr1: counts ABORT_ALU1L + * ctr2: counts ADDR0_INVALID + * ctr3: counts ADDR1_INVALID + */ + +{ +0x0c00c000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x6fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000d,0x01001fc0, +0x03008007,0xf000f030,0x01fc0038,0x10007f00, +0x0905001f,0xc0020180,0x07f000b0,0x7001fc00, +0x2820007f,0x00050900,0x1fc00102,0x8007f000, +0x70b001fc,0x00183000,0x7f00010d,0x001fc000, +0x038007f0,0x0030f001,0xfc000bff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x65380000,00000000,0x60000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + + + +/* brad_stall + * + * ctr0: counts the total number of cycles for which brad_stall is asserted + * ctr1: counts the number of times brad_stall is asserted for 1-4 cycles + * ctr2: counts the number of times brad_stall is asserted for 5-7 cycles + * ctr3: counts the number of times brad_stall is asserted for > 7 cycles + */ +{ +0x0c002000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x1fffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +00000000,0x00021c20,0x03ff0808,0x1800ffc4, +0x0204003f,0xf0004280,0x0ffc6020,0x8003ff00, +0x043800ff,0xc8020c00,0x3ff00044,0x800ffca0, +0x210003ff,0x00045800,0xffcc0214,0x003ff000, +0x26800ffc,0xe0218003,0xff000278,0x00ffd002, +0x1c003ff0,0x0028800f,0xfd002200,0x03ff0001, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x1bff0000,00000000,0x10000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + +/* cntl_in_pipel + * + * ctr0: counts the total number of cycles for which cntl_in_pipel is asserted + * ctr1: counts the number of times cntl_in_pipel is asserted for 1-4 cycles + * ctr2: counts the number of times cntl_in_pipel is asserted for 5-7 cycles + * ctr3: counts the number of times cntl_in_pipel is asserted for > 7 cycles + */ +{ +0x0c006000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x3fffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +00000000,0x00021c00,0x03ff0808,0x1000ffc4, +0x0206003f,0xf0004200,0x0ffc6020,0xa003ff00, +0x043000ff,0xc8020e00,0x3ff00044,0x000ffca0, +0x212003ff,0x00045000,0xffcc0216,0x003ff000, +0x26000ffc,0xe021a003,0xff000270,0x00ffd002, +0x1e003ff0,0x0028000f,0xfd002220,0x03ff0001, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x3fff0000,00000000,0x30000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + + +/* dsnt_xfh + * + * ctr0: counts dside_notrans + * ctr1: counts xfhang + * ctr2: is the overflow for ctr0 + * ctr3: is the overflow for ctr1 + */ +{ +0x0c018000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xcfffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +00000000,0x00030000,0x01f30000,0x00087cc0, +0x0040041f,0x30002001,0x87cc000c,0x1001f300, +0x0404087c,0xc0014104,0x1f300060,0x4187cc00, +0x1c2001f3,0x00080808,0x7cc00242,0x041f3000, +0xa08187cc,0x002c3001,0xf3000c0c,0x087cc003, +0x43041f30,0x00e0c187,0xcc003fc0,0x07fff800, +0xf001fffe,0x003c007f,0xff800f00,0x1fffe003, +0xc007fff8,0x00f001ff,0xfe003c00,0x7fff800f, +0x001fffe0,0x03c007ff,0xf800f001,0xfffe003c, +0x007fff80,0x0f001fff,0xe003c007,0xfff800f0, +0x01fffe00,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0xcb3f0000,00000000,0xc0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* fet_sig1 + * + * ctr0: counts ICORE_AV + * ctr1: counts ITRANS_STALL + * ctr2: counts SEL_PCQH + * ctr3: counts OUT_OF_CONTEXT + */ +{ +0x0c000000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x0fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x07c10000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff}, + +/* fet_sig2 + * + * ctr0: counts ICORE_AV + * ctr1: counts IRTN_AV + * ctr2: counts ADDRESS_INC + * ctr3: counts ADDRESS_DEC + */ +{ +0x0c000000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x0fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x06930000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* g7_1 + * + * ctr0: counts HIT_RETRY0 + * ctr1: counts HIT_RETRY1 + * ctr2: counts GO_TAG_E + * ctr3: counts GO_TAG_O + */ +{ +0x0c00e000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x7fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x71c10000,00000000,0x70000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* g7_2 + * + * ctr0: counts HIT_DM0 + * ctr1: counts HIT_DM1 + * ctr2: counts GO_STORE_E + * ctr3: counts GO_STORE_O + */ +{ +0x0c00e000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x7fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x72930000,00000000,0x70000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* g7_3 + * + * ctr0: counts HIT_DV0 + * ctr1: counts HIT_DV1 + * ctr2: counts STBYPT_E (load bypasses from store queue) + * ctr3: counts STBYPT_O + */ +{ +0x0c00e000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x7fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f0002,0x01001fc0, +0x00c08007,0xf0000030,0x01fc0004,0x10007f00, +0x0605001f,0xc001c180,0x07f00040,0x7001fc00, +0x1420007f,0x000a0900,0x1fc002c2,0x8007f000, +0x80b001fc,0x00243000,0x7f000e0d,0x001fc003, +0xc38007f0,0x00c0f001,0xfc0037ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x77250000,00000000,0x70000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* g7_4 + * + * ctr0: counts HIT_DIRTY0 + * ctr1: counts HIT_DIRTY1 + * ctr2: counts CA_BYP_E (quick launch) + * ctr3: counts CA_BYP_O + */ +{ +0x0c00e000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x7fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x7bb70000,00000000,0x70000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + + +/* mpb_labort + * + * ctr0: counts L_ABORT_ALU0L + * ctr1: counts L_ABORT_ALU1L + * ctr2: counts MPB0H + * ctr3: counts MPB1H + */ +{ +0x0c00c000,00000000,0x00060000,00000000, +0xe0e0e0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffa5ffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x6fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +00000000,0x0003f800,0x007f000e,0x01001fc0, +0x03c08007,0xf000c030,0x01fc0034,0x10007f00, +0x0a05001f,0xc002c180,0x07f00080,0x7001fc00, +0x2420007f,0x00060900,0x1fc001c2,0x8007f000, +0x40b001fc,0x00143000,0x7f00020d,0x001fc000, +0xc38007f0,0x0000f001,0xfc0007ff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0x605c0000,00000000,0x60000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffaaaa,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* panic + * + * ctr0: is the overflow for counter 1 + * ctr1: counts traps and RFI's + * ctr2: counts panic traps + * ctr3: is the overflow for counter 2 + */ +{ +0x0c002000,00000000,0x00060000,00000000, +0xe7efe0e0,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffffc, +0x41380030,0x1aabfff2,0x17000000,00000000, +0x01b80000,0x3effffff,0xffffffff,0xffffffff, +0xffffffff,00000000,00000000,0x00400000, +0x00001fff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x1fffffff,0xffffffff, +0xfff7fff7,0xffffffff,0xffffffff,0xf0000000, +0xb0000000,0x00012c04,0x05790804,0x14013e44, +0x0008004f,0x90000040,0x15e46000,0xc0047920, +0x004a003e,0x40011080,0x0f900024,0x4003e460, +0x00c80479,0x00023301,0x1e400100,0x4157d080, +0x514053f4,0x40048014,0xfd000104,0x055f4600, +0x4c0147d2,0x0014a043,0xf4001508,0x10fd0003, +0x44043f46,0x004c8147,0xd0003330,0x51f40014, +0x04257908,0x0c14093e,0x44020802,0x4f900080, +0x4095e460,0x20c02479,0x20084a08,0x3e400310, +0x820f9000,0xa44083e4,0x6020c824,0x79000a33, +0x091e4003,0x3c007fff,0x800f001f,0xffe00000, +00000000,00000000,00000000,00000000, +0x10400000,00000000,0x10000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* rare_inst + * + * ctr0: counts sync and syncdma instructions + * ctr1: counts pxtlbx,x instructions + * ctr2: counts ixtlbt instructions + * ctr3: counts cycles + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xe0e0e0e0,0x004e000c,0x000843fc,0x85c09380, +0x0121ebfd,0xff217124,0xe0004000,0x943fc85f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xe00000e0,0x00003c00,0x007f0001,0x01001fc0, +0x00408007,0xf0003030,0x01fc000c,0x10007f00, +0x0505001f,0xc0014180,0x07f00070,0x7001fc00, +0x1c20007f,0x00090900,0x1fc00242,0x8007f000, +0xb0b001fc,0x002c3000,0x7f000d0d,0x001fc003, +0x438007f0,0x00f0f001,0xfc003fff,0xfffff800, +0xfffffffe,0x003fffff,0xff800fff,0xffffe003, +0xfffffff8,0x00ffffff,0xfe003fff,0xffff800f, +0xffffffe0,0x03ffffff,0xf800ffff,0xfffe003f, +0xffffff80,0x0fffffff,0xe003ffff,0xfff800ff, +0xfffffe00,0x3fffffff,0x800fffff,0xffe00000, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* rw_dfet (for D-cache misses and writebacks) + * + * ctr0: counts address valid cycles + * ctr1: counts *all* data valid cycles + * ctr2: is the overflow from counter 0 + * ctr3: is the overflow from counter 1 + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x0000000c,0x00003c00,0x07930000,0x0041e4c0, +0x01002079,0x3000800c,0x1e4c0030,0x00279300, +0x010049e4,0xc0014022,0x79300090,0x0c9e4c00, +0x34004793,0x00020051,0xe4c00180,0x24793000, +0xa00d1e4c,0x00380067,0x93000300,0x59e4c001, +0xc0267930,0x00b00d9e,0x4c003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0xf0000000,00000000, +00000000,00000000,0x98000000,00000000, +0xffffffff,0xffffffff,0x0fffffff,0xffffffff, +00000000,00000000,0x00ffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* rw_ifet (I-cache misses -- actually dumb READ transactions) + * + * ctr0: counts address valid cycles + * ctr1: counts *all* data valid cycles + * ctr2: is the overflow from counter 0 + * ctr3: is the overflow from counter 1 + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x0000000c,0x00003c00,0x07930000,0x0041e4c0, +0x01002079,0x3000800c,0x1e4c0030,0x00279300, +0x010049e4,0xc0014022,0x79300090,0x0c9e4c00, +0x34004793,0x00020051,0xe4c00180,0x24793000, +0xa00d1e4c,0x00380067,0x93000300,0x59e4c001, +0xc0267930,0x00b00d9e,0x4c003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0xd0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +0xffffffff,0xffffffff,00000000,00000000, +0xffffffff,0xffffffff }, + + +/* rw_sdfet (READ_SHARED_OR_PRIVATE transactions) + * + * ctr0: counts address valid cycles + * ctr1: counts *all* data valid cycles + * ctr2: is the overflow from counter 0 + * ctr3: is the overflow from counter 1 + */ +{ +0x0c01e000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x0000000c,0x00003c00,0x07930000,0x0041e4c0, +0x01002079,0x3000800c,0x1e4c0030,0x00279300, +0x010049e4,0xc0014022,0x79300090,0x0c9e4c00, +0x34004793,0x00020051,0xe4c00180,0x24793000, +0xa00d1e4c,0x00380067,0x93000300,0x59e4c001, +0xc0267930,0x00b00d9e,0x4c003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00100000,00000000,0xf4000000,00000000, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +00000000,00000000,00000000,00000000, +0xffffffff,0xffffffff }, + + +/* spec_ifet + * + * ICORE_AV fires for every request which the Instruction Fetch Unit sends + * to the Runway Interface Block. Hence, this counts all I-misses, speculative + * or not, but does *not* include I-cache prefetches, which are generated by + * RIB. + * IRTN_AV fires twice for every I-cache miss returning from RIB to the IFU. + * It will not fire if a second I-cache miss is issued from the IFU to RIB + * before the first returns. Therefore, if the IRTN_AV count is much less + * than 2x the ICORE_AV count, many speculative I-cache misses are occurring + * which are "discovered" to be incorrect fairly quickly. + * The ratio of I-cache miss transactions on Runway to the ICORE_AV count is + * a measure of the effectiveness of instruction prefetching. This ratio + * should be between 1 and 2. If it is close to 1, most prefetches are + * eventually called for by the IFU; if it is close to 2, almost no prefetches + * are useful and they are wasted bus traffic. + * + * ctr0: counts ICORE_AV + * ctr1: counts IRTN_AV + * ctr2: counts all non-coherent READ transactions on Runway. (TTYPE D0) + * This should be just I-cache miss and I-prefetch transactions. + * ctr3: counts total processor cycles + */ +{ +0x0c000000,00000000,0x00060000,00000000, +0xefefefef,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0x0fffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0x00000008,0x00030c00,0x01bf0001,0x00806fc0, +0x00c1001b,0xf0005048,0x06fc001c,0x2001bf00, +0x0908806f,0xc002c300,0x1bf000d0,0xc806fc00, +0x3fffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0x06bf0000,00000000,00000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00110000,00000000,0xd0ffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0x00ffffff,0xffffffff, +0xffffffff,0xffffffff,00000000,00000000, +0xffffffff,0xffffffff }, + +/* st_cond0 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts major ops 0C and 0E (fp ops, not fmac or fmpyadd) + * ctr2: counts B,L (including long and push) and GATE (including nullified), + * predicted not-taken + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0e0c0e0,0xffffffff,0xffffffff,0xffc13380, +0x0101ffff,0xffa1f057,0xe000407f,0xdfffc87f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_cond1 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts major ops 1x (most of the load/stores) + * ctr2: counts CMPB (dw) predicted not-taken + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0e0c0e0,0xffffffff,0xffffffff,0xffc01b80, +0x0101ffff,0xffb7f03d,0xe000407f,0xffffc8ff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_cond2 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts major op 03 + * ctr2: counts CMPIB (dw) predicted not taken. + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0e0c0e0,0xffffffff,0xffffffff,0xffc09780, +0x0101ffff,0xff21f077,0xe000407f,0xffffc87f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_cond3 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts major ops 06 & 26 + * ctr2: counts BB, BVB, MOVB, MOVIB (incl. nullified) predicted not-taken + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0e0c0e0,0xffffffff,0xffffffff,0xffc03780, +0x0101ffff,0xff29f016,0xe000407f,0xffffe97f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_cond4 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts major op 2E + * ctr2: counts CMPB, CMPIB, ADDB, ADDIB (incl. nullified) predicted not-taken + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0e0c0e0,0xffffffff,0xffffffff,0xffc17780, +0x0101ffff,0xff21f014,0xe000407f,0xffffe9ff, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_unpred0 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts BE and BE,L + * ctr2: counts BE and BE,L including nullified + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0c0c0e0,0xffffffff,0xffffffff,0xffdf5bbf, +0xffffffff,0xff25f7d6,0xefffffff,0xffffc97f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* st_unpred1 + * + * ctr0: is the overflow for ctr1 + * ctr1: counts BLR, BV, BVE, BVE,L + * ctr2: counts BLR, BV, BVE, BVE,L including nullified + * ctr3: is the overflow for ctr2 + */ +{ +0x4c01e000,00000000,0x00060000,00000000, +0xe0c0c0e0,0xffffffff,0xffffffff,0xffc15f80, +0x0501ff7f,0xff21f057,0xe001407f,0xdfffc87f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf0000060,0x00003c00,0x04f90000,0x02013e40, +0x0081004f,0x90004060,0x13e40018,0x0024f900, +0x0802093e,0x40028102,0x4f9000c0,0x6093e400, +0x380014f9,0x00010205,0x3e4000c1,0x014f9000, +0x506053e4,0x001c0034,0xf9000902,0x0d3e4002, +0xc1034f90,0x00d060d3,0xe4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + +/* unpred + * + * ctr0: counts non-nullified unpredictable branches + * ctr1: is the overflow for ctr0 + * ctr2: counts all unpredictable branches (nullified or not) + * ctr3: is the overflow for ctr2 + */ +{ +0xcc01e000,00000000,0x00060000,00000000, +0x20202020,0xff31ffff,0xfff7fffe,0x97ffcc7f, +0xfffffdff,0xffa5fff3,0x1fffffff,0x7fffe97f, +0xffffffff,0xffffffff,0xff000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffff0000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xf0000000, +0xf00000a0,0x00003c00,0x02f50000,0x0004bd40, +0x0040802f,0x50002020,0x4bd4000c,0x0042f500, +0x040014bd,0x40014084,0x2f500060,0x214bd400, +0x1c2002f5,0x00080804,0xbd400242,0x802f5000, +0xa0a04bd4,0x002c2042,0xf5000c08,0x14bd4003, +0x42842f50,0x00e0a14b,0xd4003fff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xfffffc00, +00000000,00000000,00000000,00000000, +0xffff0000,00000000,0xf0000000,00000000, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xfffffc00,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xfffffc00,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xffffffff,0xf3ffffff,0xffffffff, +0xfdffffff,0xffffffff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0xffffffff,0xfffff9ff,0xfe000000,00000000, +0x00030000,00000000,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff,0xffffffff,0xffffffff, +0xffffffff,0xffffffff }, + + +/* go_store + * + * ctr0: Overflow for counter 2 + * ctr1: Overflow for counter 3 + * ctr2: count of GO_STORE_E signal + * ctr3: count of GO_STORE_O signal + */ + + { + 0x0c00e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffa5ffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x7fffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xf0000000, + 0x00000000, 0x0000c000, 0x067c0000, 0x01019f00, + 0x00408067, 0xc0002030, 0x19f0000c, 0x000e7c00, + 0x0401039f, 0x00014080, 0xe7c00060, 0x3039f000, + 0x1c00167c, 0x00080105, 0x9f000240, 0x8167c000, + 0xa03059f0, 0x002c001e, 0x7c000c01, 0x079f0003, + 0x4081e7c0, 0x00e03079, 0xf0003fc0, 0x07fff800, + 0xf001fffe, 0x003c007f, 0xff800f00, 0x1fffe003, + 0xc007fff8, 0x00f001ff, 0xfe003c00, 0x7fff800f, + 0x001fffe0, 0x03c007ff, 0xf800f001, 0xfffe003c, + 0x007fff80, 0x0f001fff, 0xe003c007, 0xfff800f0, + 0x01fffe00, 0x3c007fff, 0x800f001f, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x70130000, 0x00000000, 0x70000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffaaaa, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff + }, + + +/* shlib_call + * + * ctr0: SharedLib call Depth1 + * ctr1: SharedLib call Depth2 + * ctr2: SharedLib call Depth3 + * ctr3: SharedLib call Depth>3 + */ + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0xc76fa005, 0x07dd7e9c, 0x87115b80, + 0x01100200, 0x07200004, 0xe000407f, 0xfffffffc, + 0x01380010, 0x1fffffff, 0xff000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xf0000000, + 0xf0000000, 0x00003c20, 0x01ff0808, 0x04007fc0, + 0x0003001f, 0xf0000180, 0x07fc4010, 0x5001ff00, + 0x001c007f, 0xc2000a00, 0x1ff18022, 0x4007fc20, + 0x00b001ff, 0x10003800, 0x7fc8004d, 0x001ff100, + 0x03c007fc, 0x60012001, 0xff280144, 0x007fc600, + 0x13001ff2, 0x00058007, 0xfcc00550, 0x01ff2000, + 0x5c007fca, 0x001a001f, 0xf3801640, 0x07fca001, + 0xb001ff30, 0x0078007f, 0xd0005d00, 0x1ff30007, + 0xc007fce0, 0x022001ff, 0x48018400, 0x7fce0023, + 0x001ff400, 0x098007fd, 0x20065001, 0xff40009c, + 0x007fd200, 0x3fffffff, 0x800fffff, 0xffe00000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0xffff0000, 0x00000000, 0xf0000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xfffffc00, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xfffffc00, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xffffffff, 0xf3ffffff, 0xffffffff, + 0xfdffffff, 0xffffffff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0xffffffff, 0xfffff9ff, 0xfe000000, 0x00000000, + 0x00030000, 0x00000000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff + } +}; +#define PCXW_IMAGE_SIZE 576 + +static uint32_t cuda_images[][PCXW_IMAGE_SIZE/sizeof(uint32_t)] = { +/* + * CPI: FROM CPI.IDF (Image 0) + * + * Counts the following: + * + * ctr0 : total cycles + * ctr1 : total cycles where nothing retired + * ctr2 : total instructions retired, including nullified + * ctr3 : total instructions retired, less nullified instructions + */ + { + 0x4c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xffffc000, 0x07ffff00, 0x07ffffff, 0x6007ffff, + 0xff0007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0x60f00000, 0x0fffff00, 0x000fffff, 0x00000fff, + 0xff00000f, 0xffff0000, 0x00000000, 0x00ffffff, + 0xfffff000, 0x0000000f, 0xffffffff, 0xff000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00270000, 0x00000055, + 0x0200000e, 0x4d300000, 0x00000000, 0x0ff00002, + 0x70000000, 0x00000020, 0x0000e400, 0x00000ff0, + 0x00000000, 0x00000000, 0x00000055, 0xffffff00, + 0x00000000, 0x0000ff00, 0x00000000, 0x0f000000, + 0x0000055f, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0xf0000000, + 0x000055ff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0x00000000, 0x00055fff, 0xfff00000, + 0x00000000, 0x0ff00000, 0x00000030, 0x00000000, + 0x00157fff, 0xffc00000, 0x034c0000, 0x00000000, + 0x03fc0000, 0x00000000, 0x6fff0000, 0x00000000, + 0x60000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* Bus utilization image FROM BUS_UTIL.IDF (Image 1) + * + * ctr0 : counts address valid cycles + * ctr1 : counts data valid cycles + * ctr2 : counts overflow from counter 0 + * ctr3 : counts overflow from counter 1 + */ + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00001b00, 0xaa000000, + 0x00000001, 0x30700000, 0x00055aaf, 0xf0000000, + 0x01b00000, 0x00000000, 0x00001037, 0x00000000, + 0x55aaff00, 0x00c00000, 0x1b55aa00, 0x00000000, + 0x0001fff0, 0xcfffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0x30ffff0c, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xfffffff3, + 0x0ffff0cf, 0xffff0000, 0x00000000, 0x00ffffff, + 0xffffffff, 0xfffffff3, 0x0ffff0cf, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffff30, + 0xfff70000, 0x000055aa, 0xff000000, 0x000006d5, + 0x40000000, 0x00000000, 0x731c0000, 0x000156ab, + 0xfc000000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00100000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* + * TLB counts: FROM TLBSTATS.IDF (Image 2) + * + * Counts the following: + * + * ctr0: DTLB misses + * ctr1: ITLB misses + * ctr2: total cycles in the miss handlers + * ctr3: total cycles + */ + + { + 0x0c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe7e7e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xfff00000, 0x07ffff00, 0x07ffffff, 0x6007ffff, + 0xa00007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0x603001c1, 0xe0000001, 0xc0c00000, 0x00000fff, + 0xff00000f, 0xffff0000, 0x00000000, 0x00400000, + 0x00001000, 0x00000004, 0x00000000, 0x01000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00800000, 0x00153f7f, + 0x55000000, 0xaf800000, 0xc0000000, 0x0403f240, + 0x00000000, 0x00001010, 0x00004700, 0x00000ff0, + 0x00000000, 0x00000000, 0x00000055, 0xffffff00, + 0x00000000, 0x0000ff00, 0x00000000, 0x0f000000, + 0x0000055f, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0xf0000000, + 0x000055ff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0x00000000, 0x00055fff, 0xfff00000, + 0x00000000, 0x0ff00000, 0x00000000, 0x00000000, + 0x00157fff, 0xffc00000, 0x00000000, 0x3fc00000, + 0x00040000, 0x00000000, 0x6fff0000, 0x00000000, + 0x60000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* tlbhandler FROM tlbHandMiss.idf (Image 3) + * + * ctr0: TLB misses + * ctr1: dmisses inside the TLB miss handler + * ctr2: cycles in the TLB miss handler + * ctr3: overflow of ctr2 + */ + { + 0x1c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe7e7e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xfff00000, 0x07ffff00, 0x07ffffff, 0x6007ffff, + 0xa00007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0x603001c1, 0xe0000001, 0xc0c00000, 0x00000fff, + 0xff00000f, 0xffff0000, 0x00000000, 0x00400000, + 0x00001000, 0x00000004, 0x00000000, 0x01000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x006c0000, 0x01000054, + 0x02000002, 0xc3200000, 0xc00aa000, 0x0c03f240, + 0x00000000, 0x00001010, 0x000044f4, 0x00000c00, + 0xaa0000f0, 0x0f0000b0, 0x00005005, 0x0f5f0000, + 0x0001f000, 0x0000ff00, 0x00000000, 0x0f000000, + 0x0000055f, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0xf0000000, + 0x000055ff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0x00000000, 0x00055fff, 0xfff00000, + 0x00000000, 0x0ff00a00, 0x000f0000, 0x24004000, + 0x15400001, 0x40c00003, 0x3da00000, 0x0002a800, + 0x00ff0000, 0x00000000, 0x6fff0000, 0x00000000, + 0x60000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* branch_taken image FROM PTKN.IDF (Image 4) + * + * ctr0: mispredicted branches + * ctr1: predicted taken branches, actually taken + * ctr2: predicted taken branches (includes nullfied) + * ctr3: all branches + */ + + { + 0xcc01e000, 0x00000000, 0x00000000, 0x00000000, + 0xa08080a0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xfffffeff, 0xfffeffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf4ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd22d0000, 0x00000000, + 0x0000000b, 0x46000000, 0x00000000, 0x0ffff900, + 0x90000000, 0x00000000, 0x0000907e, 0x00000000, + 0x000000ff, 0xff00bfdf, 0x03030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x003f3ff0, 0x2766c000, + 0x00000000, 0x00000002, 0x67840000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* branch_nottaken FROM PNTKN.IDF (Image 5) + * + * ctr0: mispredicted branches + * ctr1: branches predicted not-taken, but actually taken + * ctr2: branches predicted not-taken (includes nullified) + * ctr3: all branches + */ + { + 0xcc01e000, 0x00000000, 0x00000000, 0x00000000, + 0xe0c0c0e0, 0xffffffff, 0xffffffff, 0xffefffff, + 0xffffbfff, 0xfffffeff, 0xfffeffff, 0xfffffeff, + 0xfffffffe, 0xffffffff, 0xffffff00, 0x00000000, + 0xf4ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd22d0000, 0x00000000, + 0x0000000b, 0x46000000, 0x00000000, 0x0ffff900, + 0x90000000, 0x00000000, 0x0000907e, 0x00000000, + 0x000000ff, 0xff00bfdf, 0x03030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x003f3ff0, 0x2766c000, + 0x00000000, 0x00000002, 0x67840000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* IMISS image (Image 6) + * + * ctr0 : icache misses for retired instructions + * ctr1 : total cycles + * ctr2 : dcache misses for retired instructions + * ctr3 : number of retired instructions + */ + { + 0x2801e000, 0x00000000, 0x00010000, 0x00000000, + 0x00001000, 0xffffffff, 0xffffffff, 0xfff00fff, + 0xfffa3fff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xf2fdf0f0, 0xf0f0f0f0, + 0xffffffff, 0xf6c00000, 0x00000000, 0x0ff55800, + 0x90000000, 0x00000000, 0x0000b0ff, 0xfffffff0, + 0x00000003, 0x0100bfff, 0x3f3f3f3f, 0x3f3f5555, + 0x555fffff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xfff00000, 0x000301b0, 0x2fefcfcf, + 0xcfcfcfcf, 0xd5555557, 0xf7b40000, 0x00000000, + 0x03c14000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* DMISS image (Image 7) + * + * ctr0 : icache misses for retired instructions + * ctr1 : total cycles + * ctr2 : dcache misses for retired instructions + * ctr3 : number of retired instructions + */ + { + 0x2801e000, 0x00000000, 0x00010000, 0x00000000, + 0x00001000, 0xffffffff, 0xffffffff, 0xfff00fff, + 0xfffa3fff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xf2fdf0f0, 0xf0f0f0f0, + 0xffffffff, 0xf6c00000, 0x00000000, 0x0ff55800, + 0x90000000, 0x00000000, 0x0000b0ff, 0xfffffff0, + 0x00000003, 0x0100bfff, 0x3f3f3f3f, 0x3f3f5555, + 0x555fffff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xfff00000, 0x000301b0, 0x2fefcfcf, + 0xcfcfcfcf, 0xd5555557, 0xf7b40000, 0x00000000, + 0x03c14000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* dmiss_access image FROM DMISS_RATIO.IDF (Image 8) + * + * ctr0 : all loads and stores that retire (even lines) + * ctr1 : all loads and stores that retire (odd lines) + * ctr2 : dcache misses of retired loads/stores + * ctr3 : all READ_PRIV and READ_SHAR_OR_PRIV on Runway + * (Speculative and Non-Speculative) + */ + { + 0x2d81e000, 0x00000000, 0x00000000, 0x00000000, + 0x10101010, 0x00ffffff, 0xa003ffff, 0xfe800fff, + 0xfffa003f, 0xffffe8ff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd2280a00, 0x00000000, + 0x0000000b, 0x46000000, 0x00000005, 0x555ff900, + 0x80200000, 0x00000000, 0x0000907e, 0x00000000, + 0x00005555, 0xff80bf8b, 0xab030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x15153fe0, 0x27628880, + 0x00000000, 0x00000002, 0x67840000, 0x00000001, + 0x5557fc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00110000, 0x00000000, + 0xf4ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xf8ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + + +/* big_cpi image (Image 9) + * + * ctr0 : Total number of CPU clock cycles. + * ctr1 : Unused + * ctr2 : Unused + * ctr3 : Total number of Non-Nullified instructions retired. + */ + { + 0x0c00c000, 0x00000000, 0x00060000, 0x00000000, + 0xe7e7e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xfff00000, 0x07ffff00, 0x07ffffff, 0x6007ffff, + 0xa00007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0x603001c1, 0xe0000001, 0xc0c00000, 0x00000fff, + 0xff00000f, 0xffff0000, 0x00000000, 0x00400000, + 0x00001000, 0x00000004, 0x00000000, 0x01000000, + 0x0000ffff, 0xfffffff0, 0x00000000, 0x0fffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00550005, 0x00220000, + 0x0000000c, 0x71f00000, 0x00f00aa0, 0x0aaff000, + 0x00005002, 0x20000000, 0x0000c413, 0x00000c0f, + 0x00aa0000, 0xff00b600, 0x000500a0, 0x00000300, + 0x000cc3f0, 0x0000c0f0, 0x0aa0000f, 0xff000000, + 0x011000a0, 0x05503000, 0x00d03700, 0x00000f00, + 0xaa005500, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0xf000aa00, + 0x11000a00, 0x55000000, 0x0d037000, 0x00c0f00a, + 0xa0055000, 0x0db00005, 0x5002a000, 0x00300000, + 0xf40f0000, 0x0c0f00aa, 0x0000ff10, 0x27400000, + 0x00008000, 0x00c00003, 0x037c0000, 0x003c02a8, + 0x02abfc00, 0x00000000, 0x6fff0000, 0x00000000, + 0x60000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* big_ls image (Image 10) + * + * ctr0 : Total number of CPU clock cycles during which local_stall_A1 is asserted + * ctr1 : Overflow of Counter 0 + * ctr2 : Total number of IFLUSH_AV + * ctr3 : Overflow of Counter 2 + */ + { + 0x0c000000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0x00ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x28880001, 0x54000000, + 0x00000004, 0xb6200000, 0x000aaaa0, 0x05555288, + 0x80000010, 0x00000000, 0x0000486e, 0x00000000, + 0xaaaa0055, 0x55002888, 0x00545401, 0x03030000, + 0x0007b000, 0x0000ff00, 0x00000000, 0x05000000, + 0x0000055f, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0x00000000, + 0x000055ff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0xa0000000, 0x00055fff, 0xfff00000, + 0x00aa0000, 0x05502a2a, 0x00151500, 0x0a220015, + 0x40400000, 0x00000001, 0xe2980000, 0x0002aaa8, + 0x01555400, 0x00000000, 0x0df70000, 0x00000000, + 0x00000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* br_abort image (Image 12) + * + * ctr0 : Total number of BRAD_STALLH + * ctr1 : Total number of ONE_QUAD + * ctr2 : Total number of BR0_ABRT + * ctr3 : Total number of BR1_ABRT + */ + + { + 0x0c002000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0xffffffff, 0xffffffff, 0xff0fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0x1077ffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x551b0000, 0x00000000, + 0x0000000c, 0xd4f00000, 0x00000000, 0x0ffff001, + 0xb0000000, 0x00000000, 0x0000fd4c, 0x00000000, + 0x000000ff, 0xff00ff1b, 0x00000000, 0x00000000, + 0x0000d000, 0x0000ff00, 0x00000000, 0x0e0fffff, + 0xffffffff, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0x00ffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0xffffffff, 0xffffffff, 0xfff00000, + 0x00400000, 0x00000000, 0x00ffff00, 0x2a86c000, + 0x00000000, 0x00000000, 0xf50c0000, 0x00000000, + 0x03fffc00, 0x00000000, 0x1a250000, 0x00000000, + 0x10000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffafff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + + +/* isnt image (Image 13) + * + * ctr0 : Total number of cycles for which iside_notrans is asserted. + * ctr1 : Total number of times iside_notrans is asserted for 1-4 cycles. + * ctr2 : Total number of times iside_notrans is asserted for 5-7 cycles. + * ctr3 : Total number of times iside_notrans is asserted for > 7 cycles. + */ + + { + 0x0c018000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xc0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x22000000, 0x000001bc, + 0x10000006, 0x00900000, 0x50000000, 0x00055a20, + 0x00000000, 0x00016060, 0x0000c021, 0x00000540, + 0x00000000, 0x55002200, 0x00000000, 0x56bc4000, + 0x00048000, 0x0000ff00, 0x00000000, 0x17000000, + 0x0000055f, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00000000, 0x000055ff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0x00000000, + 0x000055ff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0x80000000, 0x00015bf3, 0xf5500000, + 0x02210000, 0x00100000, 0x00005500, 0x08800000, + 0x00001545, 0x85000001, 0x80240000, 0x11000000, + 0x00015400, 0x00000000, 0xcdff0000, 0x00000000, + 0xc0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* quadrant image (image 14) + * + * ctr0 : Total number of instructions in quadrant 0. + * ctr1 : Total number of instructions in quadrant 1. + * ctr2 : Total number of instructions in quadrant 2. + * ctr3 : Total number of instructions in quadrant 3. + * + * Only works for 32-bit applications. + */ + + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xffffc000, 0x07ffff00, 0x07ffffff, 0x0007ffff, + 0xff0007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0xf0000000, 0x0fffff00, 0x000fffff, 0x00000fff, + 0xff00000f, 0xffff0000, 0x00000000, 0x00ffffff, + 0xffcff000, 0x0000040f, 0xfffffffc, 0xff000000, + 0x0080ffff, 0xffffcff0, 0x0000000c, 0x0fffffff, + 0xfcff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x551b0000, 0x00000000, + 0x00000003, 0x17000000, 0x00000000, 0x0ffff001, + 0xb0000000, 0x00000000, 0x00000173, 0x00000000, + 0x000000ff, 0xff00ff1b, 0x00000000, 0x00000000, + 0x000f1ff0, 0xcfffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0x30ffff0c, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xfffffff3, + 0x0ffff0cf, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xfffffff3, 0x0ffff0cf, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffff30, + 0xff7f0000, 0x00000000, 0x00fffff0, 0x2a86c000, + 0x00000000, 0x00000003, 0x05f00000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* rw_pdfet image (Image 15) + * + * ctr0 : Total of all READ_PRIV address valid cycles. + * ctr1 : Total of all READ_PRIV data valid cycles. + * ctr2 : Overflow of Counter 0. + * ctr3 : Overflow of Counter 1. + */ + + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00001b00, 0xaa000000, + 0x00000001, 0x30700000, 0x00055aaf, 0xf0000000, + 0x01b00000, 0x00000000, 0x00001037, 0x00000000, + 0x55aaff00, 0x00c00000, 0x1b55aa00, 0x00000000, + 0x0001fff0, 0xcfffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0x30ffff0c, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xfffffff3, + 0x0ffff0cf, 0xffff0000, 0x00000000, 0x00ffffff, + 0xffffffff, 0xfffffff3, 0x0ffff0cf, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffff30, + 0xfff70000, 0x000055aa, 0xff000000, 0x000006d5, + 0x40000000, 0x00000000, 0x731c0000, 0x000156ab, + 0xfc000000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00100000, 0x00000000, + 0xf8000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00ffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + }, + + +/* rw_wdfet image (Image 16) + * + * ctr0 : Counts total number of writeback transactions. + * ctr1 : Total number of data valid Runway cycles. + * ctr2 : Overflow of Counter 0. + * ctr3 : Overflow of Counter 1. + */ + + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xefefefef, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00001b00, 0xaa000000, + 0x00000001, 0x30700000, 0x00055aaf, 0xf0000000, + 0x01b00000, 0x00000000, 0x00001037, 0x00000000, + 0x55aaff00, 0x00c00000, 0x1b55aa00, 0x00000000, + 0x0001fff0, 0xcfffff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xffffffff, 0x30ffff0c, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xfffffff3, + 0x0ffff0cf, 0xffff0000, 0x00000000, 0x00ffffff, + 0xffffffff, 0xfffffff3, 0x0ffff0cf, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffff30, + 0xfff70000, 0x000055aa, 0xff000000, 0x000006d5, + 0x40000000, 0x00000000, 0x731c0000, 0x000156ab, + 0xfc000000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00100000, 0x00000000, + 0x98000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + 0x00ffffff, 0xffffffff, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xffffffff, 0xffffffff, + }, + +/* shlib_cpi image (Image 17) + * + * ctr0 : Total number of instructions in quadrant 0. + * ctr1 : Total number of CPU clock cycles in quadrant 0. + * ctr2 : Total number of Non-Nullified instructions retired. + * ctr3 : Total number of CPU clock cycles. + * + * Only works for 32-bit shared libraries. + */ + + { + 0x0c01e000, 0x00000000, 0x00060000, 0x00000000, + 0xe0e0e0e0, 0x00001fff, 0xfc00007f, 0xfff00001, + 0xffffc000, 0x07ffff00, 0x07ffffff, 0x0007ffff, + 0xff0007ff, 0xffff0007, 0xffffff00, 0x00000000, + 0xf0150000, 0x0fffff00, 0x000fffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0x00ffffff, + 0xffcff000, 0x0000000f, 0xfffffffc, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x27000000, 0x00000055, + 0x02000005, 0x7f500000, 0xc0000000, 0x000ff270, + 0x00000000, 0x00000000, 0x00007700, 0x00000ff0, + 0x00000000, 0x0000ffff, 0xffffffff, 0xffffff00, + 0x00000000, 0x0000ff00, 0x00000000, 0x0f0fffff, + 0xffffffff, 0xfffff000, 0x00000000, 0x000ff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x00ff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0x00ff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xfff00000, + 0x00000000, 0x0ff00000, 0x000000a0, 0x3fffffff, + 0xffffffff, 0xffc00000, 0x03d40000, 0x20000000, + 0x0003fc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff7fbfc, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff7fbfc, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00030000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* flop image (Image 18) + * + * ctr0 : Total number of floating point instructions (opcode = 0xc). + * ctr1 : Total number of floating point instructions (opcode = 0xe, 0x6, 0x2e, 0x26). + * ctr2 : Unused + * ctr3 : Unused + */ + + { + 0x0001e000, 0x00000000, 0x00000000, 0x00000000, + 0x00001010, 0x33ffffff, 0x006fffff, 0xfc5fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd22d0000, 0x00000000, + 0x0000000b, 0x46000000, 0x00000000, 0x0ffff900, + 0x90000000, 0x00000000, 0x0000907e, 0x00000000, + 0x000000ff, 0xff00bfdf, 0x03030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x003f3ff0, 0x2766c000, + 0x00000000, 0x00000002, 0x67840000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* cachemiss image FROM I_D_MISSES.IDF (Image 19) + * + * ctr0 : icache misses for retired instructions + * ctr1 : total cycles + * ctr2 : dcache misses for retired instructions + * ctr3 : number of retired instructions + */ + { + 0x2801e000, 0x00000000, 0x00010000, 0x00000000, + 0x00001000, 0xffffffff, 0xffffffff, 0xfff00fff, + 0xfffa3fff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xf2fdf0f0, 0xf0f0f0f0, + 0xffffffff, 0xf6c00000, 0x00000000, 0x0ff55800, + 0x90000000, 0x00000000, 0x0000b0ff, 0xfffffff0, + 0x00000003, 0x0100bfff, 0x3f3f3f3f, 0x3f3f5555, + 0x555fffff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xfff00000, 0x000301b0, 0x2fefcfcf, + 0xcfcfcfcf, 0xd5555557, 0xf7b40000, 0x00000000, + 0x03c14000, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* branch FROM br_report3.idf + * + * ctr0 : Total number of mispredicted branches. + * ctr1 : Some Non-Nullified unpredictable branches. + * ctr2 : Total number of branches (Nullified + Non-Nullified) + * (Unpredicted+ Predicted Taken +Predicted Not Taken). + * Total of All Branches. + * ctr3 : Remaining Non-Nullified unpredictable branches. + */ + { + 0x4001e000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0xffffffff, 0xff9fffff, 0xfe0fffff, + 0xffffbaff, 0xfdffc0ff, 0xfffdffff, 0xfffffeff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf4ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd22d0000, 0x00000000, + 0x0000000b, 0x46000000, 0x00000000, 0x0ffff900, + 0x90000000, 0x00000000, 0x0000907e, 0x00000000, + 0x000000ff, 0xff00bfdf, 0x03030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x003f3ff0, 0x2766c000, + 0x00000000, 0x00000002, 0x67840000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* crstack FROM crs_report.idf + * + * ctr0: correctly predicted branches by the pop_latch + * ctr1: some procedure returns + * ctr2: all branches, (includes nullified) + * ctr3: remaining procedure returns + */ + { + 0x4001e000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0xffffffff, 0xffa10300, 0x000fffff, + 0xffffbaf8, 0x3000007f, 0xffffffff, 0xfffffeff, + 0xff7fffff, 0xffffffff, 0xffffff00, 0x00000000, + 0xf2ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd22d0000, 0x00000000, + 0x0000000b, 0x46000000, 0x00000000, 0x0ffff900, + 0x90000000, 0x00000000, 0x0000907e, 0x00000000, + 0x000000ff, 0xff00bfdf, 0x03030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0xf0ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x0fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x003f3ff0, 0x2766c000, + 0x00000000, 0x00000002, 0x67840000, 0x00000000, + 0x03fffc00, 0x00000000, 0xffff0000, 0x00000000, + 0xf0000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + }, + +/* icache_report image + * + * ctr0 : Icache misses actually used by the core. + * ctr1 : ICORE_AV (Icache misses the core THINKS it needs, including fetching down speculative paths). + * ctr2 : READs on Runway (Icache misses that made it out to Runway, including + * prefetches). + * ctr3 : Prefetch returns (1x and 2x). + */ + { + 0x00000000, 0x00000000, 0x00010000, 0x00000000, + 0x00000000, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffff00, 0x00000000, + 0x00ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffff0000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0xd2002d00, 0x00000000, + 0x0000000b, 0x46000000, 0x0000000f, 0xf00ff900, + 0x00900000, 0x00000000, 0x0000907e, 0x00000000, + 0x0000ff00, 0xff83bf03, 0xdf030303, 0x03030000, + 0x000dbfff, 0xffffff00, 0x00000000, 0x000fffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xfffff000, + 0x00000000, 0x00ffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffff0000, 0x00000000, 0x80ffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffff0000, + 0x00000000, 0x4fffffff, 0xffffffff, 0xffffffff, + 0xffff5555, 0x55500000, 0x3f003f80, 0x274026c0, + 0x00000000, 0x00000002, 0x67840000, 0x00000003, + 0xfc03fc00, 0x00000000, 0x0eff0000, 0x00000000, + 0x00000000, 0x00000000, 0x00ffffff, 0xff3fffff, + 0xffffffff, 0xffcfffff, 0xfff6fb7c, 0x00000000, + 0x00ffffff, 0xff3fffff, 0xffffffff, 0xffcfffff, + 0xfff6fb7c, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffff0fff, 0xffffff3f, + 0xffffffff, 0xffffff7f, 0xffffffff, 0xfffffefc, + 0x00000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0xffffffff, 0xfffff9ff, + 0xfe000000, 0x00000000, 0x00130000, 0x00000000, + 0xd0ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0x00ffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + + } + +}; + +#endif diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c new file mode 100644 index 000000000000..46e4a6881f11 --- /dev/null +++ b/arch/parisc/kernel/process.c @@ -0,0 +1,396 @@ +/* + * PARISC Architecture-dependent parts of process handling + * based on the work for i386 + * + * Copyright (C) 1999-2003 Matthew Wilcox + * Copyright (C) 2000 Martin K Petersen + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000 David Huggins-Daines + * Copyright (C) 2000-2003 Paul Bame + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 David Kennedy + * Copyright (C) 2000 Richard Hirst + * Copyright (C) 2000 Grant Grundler + * Copyright (C) 2001 Alan Modra + * Copyright (C) 2001-2002 Ryan Bradetich + * Copyright (C) 2001-2002 Helge Deller + * Copyright (C) 2002 Randolph Chung + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +static int hlt_counter; + +/* + * Power off function, if any + */ +void (*pm_power_off)(void); + +void disable_hlt(void) +{ + hlt_counter++; +} + +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} + +EXPORT_SYMBOL(enable_hlt); + +void default_idle(void) +{ + barrier(); +} + +/* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ +void cpu_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + while (!need_resched()) + barrier(); + schedule(); + check_pgt_cache(); + } +} + + +#ifdef __LP64__ +#define COMMAND_GLOBAL 0xfffffffffffe0030UL +#else +#define COMMAND_GLOBAL 0xfffe0030 +#endif + +#define CMD_RESET 5 /* reset any module */ + +/* +** The Wright Brothers and Gecko systems have a H/W problem +** (Lasi...'nuf said) may cause a broadcast reset to lockup +** the system. An HVERSION dependent PDC call was developed +** to perform a "safe", platform specific broadcast reset instead +** of kludging up all the code. +** +** Older machines which do not implement PDC_BROADCAST_RESET will +** return (with an error) and the regular broadcast reset can be +** issued. Obviously, if the PDC does implement PDC_BROADCAST_RESET +** the PDC call will not return (the system will be reset). +*/ +void machine_restart(char *cmd) +{ +#ifdef FASTBOOT_SELFTEST_SUPPORT + /* + ** If user has modified the Firmware Selftest Bitmap, + ** run the tests specified in the bitmap after the + ** system is rebooted w/PDC_DO_RESET. + ** + ** ftc_bitmap = 0x1AUL "Skip destructive memory tests" + ** + ** Using "directed resets" at each processor with the MEM_TOC + ** vector cleared will also avoid running destructive + ** memory self tests. (Not implemented yet) + */ + if (ftc_bitmap) { + pdc_do_firm_test_reset(ftc_bitmap); + } +#endif + /* set up a new led state on systems shipped with a LED State panel */ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN); + + /* "Normal" system reset */ + pdc_do_reset(); + + /* Nope...box should reset with just CMD_RESET now */ + gsc_writel(CMD_RESET, COMMAND_GLOBAL); + + /* Wait for RESET to lay us to rest. */ + while (1) ; + +} + +EXPORT_SYMBOL(machine_restart); + +void machine_halt(void) +{ + /* + ** The LED/ChassisCodes are updated by the led_halt() + ** function, called by the reboot notifier chain. + */ +} + +EXPORT_SYMBOL(machine_halt); + + +/* + * This routine is called from sys_reboot to actually turn off the + * machine + */ +void machine_power_off(void) +{ + /* If there is a registered power off handler, call it. */ + if(pm_power_off) + pm_power_off(); + + /* Put the soft power button back under hardware control. + * If the user had already pressed the power button, the + * following call will immediately power off. */ + pdc_soft_power_button(0); + + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN); + + /* It seems we have no way to power the system off via + * software. The user has to press the button himself. */ + + printk(KERN_EMERG "System shut down completed.\n" + KERN_EMERG "Please power this system off now."); +} + +EXPORT_SYMBOL(machine_power_off); + + +/* + * Create a kernel thread + */ + +extern pid_t __kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); +pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) +{ + + /* + * FIXME: Once we are sure we don't need any debug here, + * kernel_thread can become a #define. + */ + + return __kernel_thread(fn, arg, flags); +} +EXPORT_SYMBOL(kernel_thread); + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ +} + +void flush_thread(void) +{ + /* Only needs to handle fpu stuff or perf monitors. + ** REVISIT: several arches implement a "lazy fpu state". + */ + set_fs(USER_DS); +} + +void release_thread(struct task_struct *dead_task) +{ +} + +/* + * Fill in the FPU structure for a core dump. + */ + +int dump_fpu (struct pt_regs * regs, elf_fpregset_t *r) +{ + if (regs == NULL) + return 0; + + memcpy(r, regs->fr, sizeof *r); + return 1; +} + +int dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *r) +{ + memcpy(r, tsk->thread.regs.fr, sizeof(*r)); + return 1; +} + +/* Note that "fork()" is implemented in terms of clone, with + parameters (SIGCHLD, regs->gr[30], regs). */ +int +sys_clone(unsigned long clone_flags, unsigned long usp, + struct pt_regs *regs) +{ + int __user *user_tid = (int __user *)regs->gr[26]; + + /* usp must be word aligned. This also prevents users from + * passing in the value 1 (which is the signal for a special + * return for a kernel thread) */ + usp = ALIGN(usp, 4); + + /* A zero value for usp means use the current stack */ + if(usp == 0) + usp = regs->gr[30]; + + return do_fork(clone_flags, usp, regs, 0, user_tid, NULL); +} + +int +sys_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gr[30], regs, 0, NULL, NULL); +} + +int +copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, /* in ia64 this is "user_stack_size" */ + struct task_struct * p, struct pt_regs * pregs) +{ + struct pt_regs * cregs = &(p->thread.regs); + struct thread_info *ti = p->thread_info; + + /* We have to use void * instead of a function pointer, because + * function pointers aren't a pointer to the function on 64-bit. + * Make them const so the compiler knows they live in .text */ + extern void * const ret_from_kernel_thread; + extern void * const child_return; +#ifdef CONFIG_HPUX + extern void * const hpux_child_return; +#endif + + *cregs = *pregs; + + /* Set the return value for the child. Note that this is not + actually restored by the syscall exit path, but we put it + here for consistency in case of signals. */ + cregs->gr[28] = 0; /* child */ + + /* + * We need to differentiate between a user fork and a + * kernel fork. We can't use user_mode, because the + * the syscall path doesn't save iaoq. Right now + * We rely on the fact that kernel_thread passes + * in zero for usp. + */ + if (usp == 1) { + /* kernel thread */ + cregs->ksp = (((unsigned long)(ti)) + THREAD_SZ_ALGN); + /* Must exit via ret_from_kernel_thread in order + * to call schedule_tail() + */ + cregs->kpc = (unsigned long) &ret_from_kernel_thread; + /* + * Copy function and argument to be called from + * ret_from_kernel_thread. + */ +#ifdef __LP64__ + cregs->gr[27] = pregs->gr[27]; +#endif + cregs->gr[26] = pregs->gr[26]; + cregs->gr[25] = pregs->gr[25]; + } else { + /* user thread */ + /* + * Note that the fork wrappers are responsible + * for setting gr[21]. + */ + + /* Use same stack depth as parent */ + cregs->ksp = ((unsigned long)(ti)) + + (pregs->gr[21] & (THREAD_SIZE - 1)); + cregs->gr[30] = usp; + if (p->personality == PER_HPUX) { +#ifdef CONFIG_HPUX + cregs->kpc = (unsigned long) &hpux_child_return; +#else + BUG(); +#endif + } else { + cregs->kpc = (unsigned long) &child_return; + } + } + + return 0; +} + +unsigned long thread_saved_pc(struct task_struct *t) +{ + return t->thread.regs.kpc; +} + +/* + * sys_execve() executes a new program. + */ + +asmlinkage int sys_execve(struct pt_regs *regs) +{ + int error; + char *filename; + + filename = getname((const char __user *) regs->gr[26]); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, (char __user **) regs->gr[25], + (char __user **) regs->gr[24], regs); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); +out: + + return error; +} + +unsigned long +get_wchan(struct task_struct *p) +{ + struct unwind_frame_info info; + unsigned long ip; + int count = 0; + /* + * These bracket the sleeping functions.. + */ + + unwind_frame_init_from_blocked_task(&info, p); + do { + if (unwind_once(&info) < 0) + return 0; + ip = info.ip; + if (!in_sched_functions(ip)) + return ip; + } while (count++ < 16); + return 0; +} diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c new file mode 100644 index 000000000000..13b721cb9f55 --- /dev/null +++ b/arch/parisc/kernel/processor.c @@ -0,0 +1,400 @@ +/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $ + * + * Initial setup-routines for HP 9000 based hardware. + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * Modifications for PA-RISC (C) 1999 Helge Deller + * Modifications copyright 1999 SuSE GmbH (Philipp Rumpf) + * Modifications copyright 2000 Martin K. Petersen + * Modifications copyright 2000 Philipp Rumpf + * Modifications copyright 2001 Ryan Bradetich + * + * Initial PA-RISC Version: 04-23-1999 by Helge Deller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include /* for register_parisc_driver() stuff */ +#include +#include +#include +#include +#include /* for struct irq_region */ +#include + +struct system_cpuinfo_parisc boot_cpu_data; +EXPORT_SYMBOL(boot_cpu_data); + +struct cpuinfo_parisc cpu_data[NR_CPUS]; + +/* +** PARISC CPU driver - claim "device" and initialize CPU data structures. +** +** Consolidate per CPU initialization into (mostly) one module. +** Monarch CPU will initialize boot_cpu_data which shouldn't +** change once the system has booted. +** +** The callback *should* do per-instance initialization of +** everything including the monarch. "Per CPU" init code in +** setup.c:start_parisc() has migrated here and start_parisc() +** will call register_parisc_driver(&cpu_driver) before calling do_inventory(). +** +** The goal of consolidating CPU initialization into one place is +** to make sure all CPU's get initialized the same way. +** The code path not shared is how PDC hands control of the CPU to the OS. +** The initialization of OS data structures is the same (done below). +*/ + +/** + * processor_probe - Determine if processor driver should claim this device. + * @dev: The device which has been found. + * + * Determine if processor driver should claim this chip (return 0) or not + * (return 1). If so, initialize the chip and tell other partners in crime + * they have work to do. + */ +static int __init processor_probe(struct parisc_device *dev) +{ + unsigned long txn_addr; + unsigned long cpuid; + struct cpuinfo_parisc *p; + +#ifndef CONFIG_SMP + if (boot_cpu_data.cpu_count > 0) { + printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n"); + return 1; + } +#endif + + /* logical CPU ID and update global counter + * May get overwritten by PAT code. + */ + cpuid = boot_cpu_data.cpu_count; + txn_addr = dev->hpa; /* for legacy PDC */ + +#ifdef __LP64__ + if (is_pdc_pat()) { + ulong status; + unsigned long bytecnt; + pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; +#undef USE_PAT_CPUID +#ifdef USE_PAT_CPUID + struct pdc_pat_cpu_num cpu_info; +#endif + + status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc, + dev->mod_index, PA_VIEW, &pa_pdc_cell); + + BUG_ON(PDC_OK != status); + + /* verify it's the same as what do_pat_inventory() found */ + BUG_ON(dev->mod_info != pa_pdc_cell.mod_info); + BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location); + + txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */ + +#ifdef USE_PAT_CPUID +/* We need contiguous numbers for cpuid. Firmware's notion + * of cpuid is for physical CPUs and we just don't care yet. + * We'll care when we need to query PAT PDC about a CPU *after* + * boot time (ie shutdown a CPU from an OS perspective). + */ + /* get the cpu number */ + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + + BUG_ON(PDC_OK != status); + + if (cpu_info.cpu_num >= NR_CPUS) { + printk(KERN_WARNING "IGNORING CPU at 0x%x," + " cpu_slot_id > NR_CPUS" + " (%ld > %d)\n", + dev->hpa, cpu_info.cpu_num, NR_CPUS); + /* Ignore CPU since it will only crash */ + boot_cpu_data.cpu_count--; + return 1; + } else { + cpuid = cpu_info.cpu_num; + } +#endif + } +#endif + + p = &cpu_data[cpuid]; + boot_cpu_data.cpu_count++; + + /* initialize counters */ + memset(p, 0, sizeof(struct cpuinfo_parisc)); + + p->loops_per_jiffy = loops_per_jiffy; + p->dev = dev; /* Save IODC data in case we need it */ + p->hpa = dev->hpa; /* save CPU hpa */ + p->cpuid = cpuid; /* save CPU id */ + p->txn_addr = txn_addr; /* save CPU IRQ address */ +#ifdef CONFIG_SMP + spin_lock_init(&p->lock); + + /* + ** FIXME: review if any other initialization is clobbered + ** for boot_cpu by the above memset(). + */ + + /* stolen from init_percpu_prof() */ + cpu_data[cpuid].prof_counter = 1; + cpu_data[cpuid].prof_multiplier = 1; +#endif + + /* + ** CONFIG_SMP: init_smp_config() will attempt to get CPU's into + ** OS control. RENDEZVOUS is the default state - see mem_set above. + ** p->state = STATE_RENDEZVOUS; + */ + +#if 0 + /* CPU 0 IRQ table is statically allocated/initialized */ + if (cpuid) { + struct irqaction actions[]; + + /* + ** itimer and ipi IRQ handlers are statically initialized in + ** arch/parisc/kernel/irq.c. ie Don't need to register them. + */ + actions = kmalloc(sizeof(struct irqaction)*MAX_CPU_IRQ, GFP_ATOMIC); + if (!actions) { + /* not getting it's own table, share with monarch */ + actions = cpu_irq_actions[0]; + } + + cpu_irq_actions[cpuid] = actions; + } +#endif + + /* + * Bring this CPU up now! (ignore bootstrap cpuid == 0) + */ +#ifdef CONFIG_SMP + if (cpuid) { + cpu_set(cpuid, cpu_present_map); + cpu_up(cpuid); + } +#endif + + return 0; +} + +/** + * collect_boot_cpu_data - Fill the boot_cpu_data structure. + * + * This function collects and stores the generic processor information + * in the boot_cpu_data structure. + */ +void __init collect_boot_cpu_data(void) +{ + memset(&boot_cpu_data, 0, sizeof(boot_cpu_data)); + + boot_cpu_data.cpu_hz = 100 * PAGE0->mem_10msec; /* Hz of this PARISC */ + + /* get CPU-Model Information... */ +#define p ((unsigned long *)&boot_cpu_data.pdc.model) + if (pdc_model_info(&boot_cpu_data.pdc.model) == PDC_OK) + printk(KERN_INFO + "model %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", + p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8]); +#undef p + + if (pdc_model_versions(&boot_cpu_data.pdc.versions, 0) == PDC_OK) + printk(KERN_INFO "vers %08lx\n", + boot_cpu_data.pdc.versions); + + if (pdc_model_cpuid(&boot_cpu_data.pdc.cpuid) == PDC_OK) + printk(KERN_INFO "CPUID vers %ld rev %ld (0x%08lx)\n", + (boot_cpu_data.pdc.cpuid >> 5) & 127, + boot_cpu_data.pdc.cpuid & 31, + boot_cpu_data.pdc.cpuid); + + if (pdc_model_capabilities(&boot_cpu_data.pdc.capabilities) == PDC_OK) + printk(KERN_INFO "capabilities 0x%lx\n", + boot_cpu_data.pdc.capabilities); + + if (pdc_model_sysmodel(boot_cpu_data.pdc.sys_model_name) == PDC_OK) + printk(KERN_INFO "model %s\n", + boot_cpu_data.pdc.sys_model_name); + + boot_cpu_data.hversion = boot_cpu_data.pdc.model.hversion; + boot_cpu_data.sversion = boot_cpu_data.pdc.model.sversion; + + boot_cpu_data.cpu_type = parisc_get_cpu_type(boot_cpu_data.hversion); + boot_cpu_data.cpu_name = cpu_name_version[boot_cpu_data.cpu_type][0]; + boot_cpu_data.family_name = cpu_name_version[boot_cpu_data.cpu_type][1]; +} + + +/** + * init_cpu_profiler - enable/setup per cpu profiling hooks. + * @cpunum: The processor instance. + * + * FIXME: doesn't do much yet... + */ +static inline void __init +init_percpu_prof(int cpunum) +{ + cpu_data[cpunum].prof_counter = 1; + cpu_data[cpunum].prof_multiplier = 1; +} + + +/** + * init_per_cpu - Handle individual processor initializations. + * @cpunum: logical processor number. + * + * This function handles initialization for *every* CPU + * in the system: + * + * o Set "default" CPU width for trap handlers + * + * o Enable FP coprocessor + * REVISIT: this could be done in the "code 22" trap handler. + * (frowands idea - that way we know which processes need FP + * registers saved on the interrupt stack.) + * NEWS FLASH: wide kernels need FP coprocessor enabled to handle + * formatted printing of %lx for example (double divides I think) + * + * o Enable CPU profiling hooks. + */ +int __init init_per_cpu(int cpunum) +{ + int ret; + struct pdc_coproc_cfg coproc_cfg; + + set_firmware_width(); + ret = pdc_coproc_cfg(&coproc_cfg); + + if(ret >= 0 && coproc_cfg.ccr_functional) { + mtctl(coproc_cfg.ccr_functional, 10); /* 10 == Coprocessor Control Reg */ + + /* FWIW, FP rev/model is a more accurate way to determine + ** CPU type. CPU rev/model has some ambiguous cases. + */ + cpu_data[cpunum].fp_rev = coproc_cfg.revision; + cpu_data[cpunum].fp_model = coproc_cfg.model; + + printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n", + cpunum, coproc_cfg.revision, coproc_cfg.model); + + /* + ** store status register to stack (hopefully aligned) + ** and clear the T-bit. + */ + asm volatile ("fstd %fr0,8(%sp)"); + + } else { + printk(KERN_WARNING "WARNING: No FP CoProcessor?!" + " (coproc_cfg.ccr_functional == 0x%lx, expected 0xc0)\n" +#ifdef __LP64__ + "Halting Machine - FP required\n" +#endif + , coproc_cfg.ccr_functional); +#ifdef __LP64__ + mdelay(100); /* previous chars get pushed to console */ + panic("FP CoProc not reported"); +#endif + } + + /* FUTURE: Enable Performance Monitor : ccr bit 0x20 */ + init_percpu_prof(cpunum); + + return ret; +} + +/* + * Display cpu info for all cpu's. + */ +int +show_cpuinfo (struct seq_file *m, void *v) +{ + int n; + + for(n=0; nname : "Unknown" ); + + seq_printf(m, "hversion\t: 0x%08x\n" + "sversion\t: 0x%08x\n", + boot_cpu_data.hversion, + boot_cpu_data.sversion ); + + /* print cachesize info */ + show_cache_info(m); + + seq_printf(m, "bogomips\t: %lu.%02lu\n", + cpu_data[n].loops_per_jiffy / (500000 / HZ), + (cpu_data[n].loops_per_jiffy / (5000 / HZ)) % 100); + + seq_printf(m, "software id\t: %ld\n\n", + boot_cpu_data.pdc.model.sw_id); + } + return 0; +} + +static struct parisc_device_id processor_tbl[] = { + { HPHW_NPROC, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, SVERSION_ANY_ID }, + { 0, } +}; + +static struct parisc_driver cpu_driver = { + .name = "CPU", + .id_table = processor_tbl, + .probe = processor_probe +}; + +/** + * processor_init - Processor initalization procedure. + * + * Register this driver. + */ +void __init processor_init(void) +{ + register_parisc_driver(&cpu_driver); +} diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c new file mode 100644 index 000000000000..2937a9236384 --- /dev/null +++ b/arch/parisc/kernel/ptrace.c @@ -0,0 +1,423 @@ +/* + * Kernel support for the ptrace() and syscall tracing interfaces. + * + * Copyright (C) 2000 Hewlett-Packard Co, Linuxcare Inc. + * Copyright (C) 2000 Matthew Wilcox + * Copyright (C) 2000 David Huggins-Daines + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* PSW bits we allow the debugger to modify */ +#define USER_PSW_BITS (PSW_N | PSW_V | PSW_CB) + +#undef DEBUG_PTRACE + +#ifdef DEBUG_PTRACE +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#ifdef __LP64__ + +/* This function is needed to translate 32 bit pt_regs offsets in to + * 64 bit pt_regs offsets. For example, a 32 bit gdb under a 64 bit kernel + * will request offset 12 if it wants gr3, but the lower 32 bits of + * the 64 bit kernels view of gr3 will be at offset 28 (3*8 + 4). + * This code relies on a 32 bit pt_regs being comprised of 32 bit values + * except for the fp registers which (a) are 64 bits, and (b) follow + * the gr registers at the start of pt_regs. The 32 bit pt_regs should + * be half the size of the 64 bit pt_regs, plus 32*4 to allow for fr[] + * being 64 bit in both cases. + */ + +static long translate_usr_offset(long offset) +{ + if (offset < 0) + return -1; + else if (offset <= 32*4) /* gr[0..31] */ + return offset * 2 + 4; + else if (offset <= 32*4+32*8) /* gr[0..31] + fr[0..31] */ + return offset + 32*4; + else if (offset < sizeof(struct pt_regs)/2 + 32*4) + return offset * 2 + 4 - 32*8; + else + return -1; +} +#endif + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure single step bits etc are not set. + */ +void ptrace_disable(struct task_struct *child) +{ + /* make sure the trap bits are not set */ + pa_psw(child)->r = 0; + pa_psw(child)->t = 0; + pa_psw(child)->h = 0; + pa_psw(child)->l = 0; +} + +long sys_ptrace(long request, pid_t pid, long addr, long data) +{ + struct task_struct *child; + long ret; +#ifdef DEBUG_PTRACE + long oaddr=addr, odata=data; +#endif + + lock_kernel(); + ret = -EPERM; + if (request == PTRACE_TRACEME) { + /* are we already being traced? */ + if (current->ptrace & PT_PTRACED) + goto out; + + ret = security_ptrace(current->parent, current); + if (ret) + goto out; + + /* set the ptrace bit in the process flags. */ + current->ptrace |= PT_PTRACED; + ret = 0; + goto out; + } + + ret = -ESRCH; + read_lock(&tasklist_lock); + child = find_task_by_pid(pid); + if (child) + get_task_struct(child); + read_unlock(&tasklist_lock); + if (!child) + goto out; + ret = -EPERM; + if (pid == 1) /* no messing around with init! */ + goto out_tsk; + + if (request == PTRACE_ATTACH) { + ret = ptrace_attach(child); + goto out_tsk; + } + + ret = ptrace_check_attach(child, request == PTRACE_KILL); + if (ret < 0) + goto out_tsk; + + switch (request) { + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: { + int copied; + +#ifdef __LP64__ + if (is_compat_task(child)) { + unsigned int tmp; + + addr &= 0xffffffffL; + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + ret = -EIO; + if (copied != sizeof(tmp)) + goto out_tsk; + ret = put_user(tmp,(unsigned int *) data); + DBG("sys_ptrace(PEEK%s, %d, %lx, %lx) returning %ld, data %x\n", + request == PTRACE_PEEKTEXT ? "TEXT" : "DATA", + pid, oaddr, odata, ret, tmp); + } + else +#endif + { + unsigned long tmp; + + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); + ret = -EIO; + if (copied != sizeof(tmp)) + goto out_tsk; + ret = put_user(tmp,(unsigned long *) data); + } + goto out_tsk; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = 0; +#ifdef __LP64__ + if (is_compat_task(child)) { + unsigned int tmp = (unsigned int)data; + DBG("sys_ptrace(POKE%s, %d, %lx, %lx)\n", + request == PTRACE_POKETEXT ? "TEXT" : "DATA", + pid, oaddr, odata); + addr &= 0xffffffffL; + if (access_process_vm(child, addr, &tmp, sizeof(tmp), 1) == sizeof(tmp)) + goto out_tsk; + } + else +#endif + { + if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) + goto out_tsk; + } + ret = -EIO; + goto out_tsk; + + /* Read the word at location addr in the USER area. For ptraced + processes, the kernel saves all regs on a syscall. */ + case PTRACE_PEEKUSR: { + ret = -EIO; +#ifdef __LP64__ + if (is_compat_task(child)) { + unsigned int tmp; + + if (addr & (sizeof(int)-1)) + goto out_tsk; + if ((addr = translate_usr_offset(addr)) < 0) + goto out_tsk; + + tmp = *(unsigned int *) ((char *) task_regs(child) + addr); + ret = put_user(tmp, (unsigned int *) data); + DBG("sys_ptrace(PEEKUSR, %d, %lx, %lx) returning %ld, addr %lx, data %x\n", + pid, oaddr, odata, ret, addr, tmp); + } + else +#endif + { + unsigned long tmp; + + if ((addr & (sizeof(long)-1)) || (unsigned long) addr >= sizeof(struct pt_regs)) + goto out_tsk; + tmp = *(unsigned long *) ((char *) task_regs(child) + addr); + ret = put_user(tmp, (unsigned long *) data); + } + goto out_tsk; + } + + /* Write the word at location addr in the USER area. This will need + to change when the kernel no longer saves all regs on a syscall. + FIXME. There is a problem at the moment in that r3-r18 are only + saved if the process is ptraced on syscall entry, and even then + those values are overwritten by actual register values on syscall + exit. */ + case PTRACE_POKEUSR: + ret = -EIO; + /* Some register values written here may be ignored in + * entry.S:syscall_restore_rfi; e.g. iaoq is written with + * r31/r31+4, and not with the values in pt_regs. + */ + /* PT_PSW=0, so this is valid for 32 bit processes under 64 + * bit kernels. + */ + if (addr == PT_PSW) { + /* PT_PSW=0, so this is valid for 32 bit processes + * under 64 bit kernels. + * + * Allow writing to Nullify, Divide-step-correction, + * and carry/borrow bits. + * BEWARE, if you set N, and then single step, it won't + * stop on the nullified instruction. + */ + DBG("sys_ptrace(POKEUSR, %d, %lx, %lx)\n", + pid, oaddr, odata); + data &= USER_PSW_BITS; + task_regs(child)->gr[0] &= ~USER_PSW_BITS; + task_regs(child)->gr[0] |= data; + ret = 0; + goto out_tsk; + } +#ifdef __LP64__ + if (is_compat_task(child)) { + if (addr & (sizeof(int)-1)) + goto out_tsk; + if ((addr = translate_usr_offset(addr)) < 0) + goto out_tsk; + DBG("sys_ptrace(POKEUSR, %d, %lx, %lx) addr %lx\n", + pid, oaddr, odata, addr); + if (addr >= PT_FR0 && addr <= PT_FR31 + 4) { + /* Special case, fp regs are 64 bits anyway */ + *(unsigned int *) ((char *) task_regs(child) + addr) = data; + ret = 0; + } + else if ((addr >= PT_GR1+4 && addr <= PT_GR31+4) || + addr == PT_IAOQ0+4 || addr == PT_IAOQ1+4 || + addr == PT_SAR+4) { + /* Zero the top 32 bits */ + *(unsigned int *) ((char *) task_regs(child) + addr - 4) = 0; + *(unsigned int *) ((char *) task_regs(child) + addr) = data; + ret = 0; + } + goto out_tsk; + } + else +#endif + { + if ((addr & (sizeof(long)-1)) || (unsigned long) addr >= sizeof(struct pt_regs)) + goto out_tsk; + if ((addr >= PT_GR1 && addr <= PT_GR31) || + addr == PT_IAOQ0 || addr == PT_IAOQ1 || + (addr >= PT_FR0 && addr <= PT_FR31 + 4) || + addr == PT_SAR) { + *(unsigned long *) ((char *) task_regs(child) + addr) = data; + ret = 0; + } + goto out_tsk; + } + + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: + ret = -EIO; + DBG("sys_ptrace(%s)\n", + request == PTRACE_SYSCALL ? "SYSCALL" : "CONT"); + if ((unsigned long) data > _NSIG) + goto out_tsk; + child->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP); + if (request == PTRACE_SYSCALL) { + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } else { + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } + child->exit_code = data; + goto out_wake_notrap; + + case PTRACE_KILL: + /* + * make the child exit. Best I can do is send it a + * sigkill. perhaps it should be put in the status + * that it wants to exit. + */ + DBG("sys_ptrace(KILL)\n"); + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + goto out_tsk; + child->exit_code = SIGKILL; + goto out_wake_notrap; + + case PTRACE_SINGLEBLOCK: + DBG("sys_ptrace(SINGLEBLOCK)\n"); + ret = -EIO; + if ((unsigned long) data > _NSIG) + goto out_tsk; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->ptrace &= ~PT_SINGLESTEP; + child->ptrace |= PT_BLOCKSTEP; + child->exit_code = data; + + /* Enable taken branch trap. */ + pa_psw(child)->r = 0; + pa_psw(child)->t = 1; + pa_psw(child)->h = 0; + pa_psw(child)->l = 0; + goto out_wake; + + case PTRACE_SINGLESTEP: + DBG("sys_ptrace(SINGLESTEP)\n"); + ret = -EIO; + if ((unsigned long) data > _NSIG) + goto out_tsk; + + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->ptrace &= ~PT_BLOCKSTEP; + child->ptrace |= PT_SINGLESTEP; + child->exit_code = data; + + if (pa_psw(child)->n) { + struct siginfo si; + + /* Nullified, just crank over the queue. */ + task_regs(child)->iaoq[0] = task_regs(child)->iaoq[1]; + task_regs(child)->iasq[0] = task_regs(child)->iasq[1]; + task_regs(child)->iaoq[1] = task_regs(child)->iaoq[0] + 4; + pa_psw(child)->n = 0; + pa_psw(child)->x = 0; + pa_psw(child)->y = 0; + pa_psw(child)->z = 0; + pa_psw(child)->b = 0; + ptrace_disable(child); + /* Don't wake up the child, but let the + parent know something happened. */ + si.si_code = TRAP_TRACE; + si.si_addr = (void __user *) (task_regs(child)->iaoq[0] & ~3); + si.si_signo = SIGTRAP; + si.si_errno = 0; + force_sig_info(SIGTRAP, &si, child); + //notify_parent(child, SIGCHLD); + //ret = 0; + goto out_wake; + } + + /* Enable recovery counter traps. The recovery counter + * itself will be set to zero on a task switch. If the + * task is suspended on a syscall then the syscall return + * path will overwrite the recovery counter with a suitable + * value such that it traps once back in user space. We + * disable interrupts in the childs PSW here also, to avoid + * interrupts while the recovery counter is decrementing. + */ + pa_psw(child)->r = 1; + pa_psw(child)->t = 0; + pa_psw(child)->h = 0; + pa_psw(child)->l = 0; + /* give it a chance to run. */ + goto out_wake; + + case PTRACE_DETACH: + ret = ptrace_detach(child, data); + goto out_tsk; + + case PTRACE_GETEVENTMSG: + ret = put_user(child->ptrace_message, (unsigned int __user *) data); + goto out_tsk; + + default: + ret = ptrace_request(child, request, addr, data); + goto out_tsk; + } + +out_wake_notrap: + ptrace_disable(child); +out_wake: + wake_up_process(child); + ret = 0; +out_tsk: + put_task_struct(child); +out: + unlock_kernel(); + DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n", + request, pid, oaddr, odata, ret); + return ret; +} + +void syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S new file mode 100644 index 000000000000..8dd5defb7316 --- /dev/null +++ b/arch/parisc/kernel/real2.S @@ -0,0 +1,304 @@ +/* + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) + * + */ +#include +#include + + .section .bss + .export real_stack + .export real32_stack + .export real64_stack + .align 64 +real_stack: +real32_stack: +real64_stack: + .block 8192 + +#ifdef __LP64__ +# define REG_SZ 8 +#else +# define REG_SZ 4 +#endif + +#define N_SAVED_REGS 9 + +save_cr_space: + .block REG_SZ * N_SAVED_REGS +save_cr_end: + + +/************************ 32-bit real-mode calls ***********************/ +/* This can be called in both narrow and wide kernels */ + + .text + + .export real32_call_asm + + /* unsigned long real32_call_asm(unsigned int *sp, + * unsigned int *arg0p, + * unsigned int iodc_fn) + * sp is value of stack pointer to adopt before calling PDC (virt) + * arg0p points to where saved arg values may be found + * iodc_fn is the IODC function to call + */ + +real32_call_asm: + STREG %rp, -RP_OFFSET(%sp) /* save RP */ +#ifdef __LP64__ + callee_save + ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */ + STREG %r27, -1*REG_SZ(%sp) + STREG %r29, -2*REG_SZ(%sp) +#endif + STREG %sp, -REG_SZ(%arg0) /* save SP on real-mode stack */ + copy %arg0, %sp /* adopt the real-mode SP */ + + /* save iodc_fn */ + copy %arg2, %r31 + + /* load up the arg registers from the saved arg area */ + /* 32-bit calling convention passes first 4 args in registers */ + ldw 0(%arg1), %arg0 /* note overwriting arg0 */ + ldw -8(%arg1), %arg2 + ldw -12(%arg1), %arg3 + ldw -4(%arg1), %arg1 /* obviously must do this one last! */ + + tophys_r1 %sp + + b,l rfi_virt2real,%r2 + nop + + b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ + nop + +#ifdef __LP64__ + rsm PSW_SM_W, %r0 /* go narrow */ +#endif + + load32 PA(ric_ret), %r2 + bv 0(%r31) + nop +ric_ret: +#ifdef __LP64__ + ssm PSW_SM_W, %r0 /* go wide */ +#endif + /* restore CRs before going virtual in case we page fault */ + b,l restore_control_regs, %r2 /* modifies r1, r2, r26 */ + nop + + b,l rfi_real2virt,%r2 + nop + + tovirt_r1 %sp + LDREG -REG_SZ(%sp), %sp /* restore SP */ +#ifdef __LP64__ + LDREG -1*REG_SZ(%sp), %r27 + LDREG -2*REG_SZ(%sp), %r29 + ldo -2*REG_SZ(%sp), %sp + callee_rest +#endif + LDREG -RP_OFFSET(%sp), %rp /* restore RP */ + bv 0(%rp) + nop + + +# define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where) +# define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r + + .text +save_control_regs: + load32 PA(save_cr_space), %r28 + PUSH_CR(%cr24, %r28) + PUSH_CR(%cr25, %r28) + PUSH_CR(%cr26, %r28) + PUSH_CR(%cr27, %r28) + PUSH_CR(%cr28, %r28) + PUSH_CR(%cr29, %r28) + PUSH_CR(%cr30, %r28) + PUSH_CR(%cr31, %r28) + PUSH_CR(%cr15, %r28) + bv 0(%r2) + nop + +restore_control_regs: + load32 PA(save_cr_end), %r26 + POP_CR(%cr15, %r26) + POP_CR(%cr31, %r26) + POP_CR(%cr30, %r26) + POP_CR(%cr29, %r26) + POP_CR(%cr28, %r26) + POP_CR(%cr27, %r26) + POP_CR(%cr26, %r26) + POP_CR(%cr25, %r26) + POP_CR(%cr24, %r26) + bv 0(%r2) + nop + +/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for + * more general-purpose use by the several places which need RFIs + */ + .align 128 + .text +rfi_virt2real: + /* switch to real mode... */ + ssm 0,0 /* See "relied upon translation" */ + nop /* PA 2.0 Arch. F-5 */ + nop + nop + nop + nop + nop + nop + nop + + rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */ + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + load32 PA(rfi_v2r_1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %cr22 + rfi + + nop + nop + nop + nop + nop + nop + nop + nop +rfi_v2r_1: + tophys_r1 %r2 + bv 0(%r2) + nop + + .text + .align 128 +rfi_real2virt: + ssm 0,0 /* See "relied upon translation" */ + nop /* PA 2.0 Arch. F-5 */ + nop + nop + nop + nop + nop + nop + nop + + rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */ + mtctl %r0, %cr17 /* Clear IIASQ tail */ + mtctl %r0, %cr17 /* Clear IIASQ head */ + load32 (rfi_r2v_1), %r1 + mtctl %r1, %cr18 /* IIAOQ head */ + ldo 4(%r1), %r1 + mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + mtctl %r1, %cr22 + rfi + + nop + nop + nop + nop + nop + nop + nop + nop +rfi_r2v_1: + tovirt_r1 %r2 + bv 0(%r2) + nop + +#ifdef __LP64__ + +/************************ 64-bit real-mode calls ***********************/ +/* This is only usable in wide kernels right now and will probably stay so */ + .text + .export real64_call_asm + /* unsigned long real64_call_asm(unsigned long *sp, + * unsigned long *arg0p, + * unsigned long fn) + * sp is value of stack pointer to adopt before calling PDC (virt) + * arg0p points to where saved arg values may be found + * iodc_fn is the IODC function to call + */ +real64_call_asm: + std %rp, -0x10(%sp) /* save RP */ + std %sp, -8(%arg0) /* save SP on real-mode stack */ + copy %arg0, %sp /* adopt the real-mode SP */ + + /* save fn */ + copy %arg2, %r31 + + /* set up the new ap */ + ldo 64(%arg1), %r29 + + /* load up the arg registers from the saved arg area */ + /* 32-bit calling convention passes first 4 args in registers */ + ldd 0*REG_SZ(%arg1), %arg0 /* note overwriting arg0 */ + ldd 2*REG_SZ(%arg1), %arg2 + ldd 3*REG_SZ(%arg1), %arg3 + ldd 4*REG_SZ(%arg1), %r22 + ldd 5*REG_SZ(%arg1), %r21 + ldd 6*REG_SZ(%arg1), %r20 + ldd 7*REG_SZ(%arg1), %r19 + ldd 1*REG_SZ(%arg1), %arg1 /* do this one last! */ + + tophys_r1 %sp + + b,l rfi_virt2real,%r2 + nop + + b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ + nop + + load32 PA(r64_ret), %r2 + bv 0(%r31) + nop +r64_ret: + /* restore CRs before going virtual in case we page fault */ + b,l restore_control_regs, %r2 /* modifies r1, r2, r26 */ + nop + + b,l rfi_real2virt,%r2 + nop + + tovirt_r1 %sp + ldd -8(%sp), %sp /* restore SP */ + ldd -0x10(%sp), %rp /* restore RP */ + bv 0(%rp) + nop + +#endif + + .export pc_in_user_space + .text + /* Doesn't belong here but I couldn't find a nicer spot. */ + /* Should never get called, only used by profile stuff in time.c */ +pc_in_user_space: + bv,n 0(%rp) + nop + + + .export __canonicalize_funcptr_for_compare + .text + /* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html + ** GCC 3.3 and later has a new function in libgcc.a for + ** comparing function pointers. + */ +__canonicalize_funcptr_for_compare: +#ifdef __LP64__ + bve (%r2) +#else + bv %r0(%r2) +#endif + copy %r26,%r28 diff --git a/arch/parisc/kernel/semaphore.c b/arch/parisc/kernel/semaphore.c new file mode 100644 index 000000000000..ee806bcc3726 --- /dev/null +++ b/arch/parisc/kernel/semaphore.c @@ -0,0 +1,102 @@ +/* + * Semaphore implementation Copyright (c) 2001 Matthew Wilcox, Hewlett-Packard + */ + +#include +#include +#include +#include + +/* + * Semaphores are complex as we wish to avoid using two variables. + * `count' has multiple roles, depending on its value. If it is positive + * or zero, there are no waiters. The functions here will never be + * called; see + * + * When count is -1 it indicates there is at least one task waiting + * for the semaphore. + * + * When count is less than that, there are '- count - 1' wakeups + * pending. ie if it has value -3, there are 2 wakeups pending. + * + * Note that these functions are only called when there is contention + * on the lock, and as such all this is the "non-critical" part of the + * whole semaphore business. The critical part is the inline stuff in + * where we want to avoid any extra jumps and calls. + */ +void __up(struct semaphore *sem) +{ + sem->count--; + wake_up(&sem->wait); +} + +#define wakers(count) (-1 - count) + +#define DOWN_HEAD \ + int ret = 0; \ + DECLARE_WAITQUEUE(wait, current); \ + \ + /* Note that someone is waiting */ \ + if (sem->count == 0) \ + sem->count = -1; \ + \ + /* protected by the sentry still -- use unlocked version */ \ + wait.flags = WQ_FLAG_EXCLUSIVE; \ + __add_wait_queue_tail(&sem->wait, &wait); \ + lost_race: \ + spin_unlock_irq(&sem->sentry); \ + +#define DOWN_TAIL \ + spin_lock_irq(&sem->sentry); \ + if (wakers(sem->count) == 0 && ret == 0) \ + goto lost_race; /* Someone stole our wakeup */ \ + __remove_wait_queue(&sem->wait, &wait); \ + current->state = TASK_RUNNING; \ + if (!waitqueue_active(&sem->wait) && (sem->count < 0)) \ + sem->count = wakers(sem->count); + +#define UPDATE_COUNT \ + sem->count += (sem->count < 0) ? 1 : - 1; + + +void __sched __down(struct semaphore * sem) +{ + DOWN_HEAD + + for(;;) { + set_task_state(current, TASK_UNINTERRUPTIBLE); + /* we can _read_ this without the sentry */ + if (sem->count != -1) + break; + schedule(); + } + + DOWN_TAIL + UPDATE_COUNT +} + +int __sched __down_interruptible(struct semaphore * sem) +{ + DOWN_HEAD + + for(;;) { + set_task_state(current, TASK_INTERRUPTIBLE); + /* we can _read_ this without the sentry */ + if (sem->count != -1) + break; + + if (signal_pending(current)) { + ret = -EINTR; + break; + } + schedule(); + } + + DOWN_TAIL + + if (!ret) { + UPDATE_COUNT + } + + return ret; +} diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c new file mode 100644 index 000000000000..73e9c34b0948 --- /dev/null +++ b/arch/parisc/kernel/setup.c @@ -0,0 +1,368 @@ +/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $ + * + * Initial setup-routines for HP 9000 based hardware. + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * Modifications for PA-RISC (C) 1999 Helge Deller + * Modifications copyright 1999 SuSE GmbH (Philipp Rumpf) + * Modifications copyright 2000 Martin K. Petersen + * Modifications copyright 2000 Philipp Rumpf + * Modifications copyright 2001 Ryan Bradetich + * + * Initial PA-RISC Version: 04-23-1999 by Helge Deller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#define PCI_DEBUG +#include +#undef PCI_DEBUG +#include + +#include +#include +#include +#include /* for pa7300lc_init() proto */ +#include +#include +#include + +char command_line[COMMAND_LINE_SIZE]; + +/* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */ +struct proc_dir_entry * proc_runway_root = NULL; +struct proc_dir_entry * proc_gsc_root = NULL; +struct proc_dir_entry * proc_mckinley_root = NULL; + +#if !defined(CONFIG_PA20) && (defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA)) +int parisc_bus_is_phys = 1; /* Assume no IOMMU is present */ +EXPORT_SYMBOL(parisc_bus_is_phys); +#endif + +/* This sets the vmerge boundary and size, it's here because it has to + * be available on all platforms (zero means no-virtual merging) */ +unsigned long parisc_vmerge_boundary = 0; +unsigned long parisc_vmerge_max_size = 0; + +void __init setup_cmdline(char **cmdline_p) +{ + extern unsigned int boot_args[]; + + /* Collect stuff passed in from the boot loader */ + + /* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */ + if (boot_args[0] < 64) { + /* called from hpux boot loader */ + saved_command_line[0] = '\0'; + } else { + strcpy(saved_command_line, (char *)__va(boot_args[1])); + +#ifdef CONFIG_BLK_DEV_INITRD + if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ + { + initrd_start = (unsigned long)__va(boot_args[2]); + initrd_end = (unsigned long)__va(boot_args[3]); + } +#endif + } + + strcpy(command_line, saved_command_line); + *cmdline_p = command_line; +} + +#ifdef CONFIG_PA11 +void __init dma_ops_init(void) +{ + switch (boot_cpu_data.cpu_type) { + case pcx: + /* + * We've got way too many dependencies on 1.1 semantics + * to support 1.0 boxes at this point. + */ + panic( "PA-RISC Linux currently only supports machines that conform to\n" + "the PA-RISC 1.1 or 2.0 architecture specification.\n"); + + case pcxs: + case pcxt: + hppa_dma_ops = &pcx_dma_ops; + break; + case pcxl2: + pa7300lc_init(); + case pcxl: /* falls through */ + hppa_dma_ops = &pcxl_dma_ops; + break; + default: + break; + } +} +#endif + +extern int init_per_cpu(int cpuid); +extern void collect_boot_cpu_data(void); + +void __init setup_arch(char **cmdline_p) +{ +#ifdef __LP64__ + extern int parisc_narrow_firmware; +#endif + + init_per_cpu(smp_processor_id()); /* Set Modes & Enable FP */ + +#ifdef __LP64__ + printk(KERN_INFO "The 64-bit Kernel has started...\n"); +#else + printk(KERN_INFO "The 32-bit Kernel has started...\n"); +#endif + + pdc_console_init(); + +#ifdef __LP64__ + if(parisc_narrow_firmware) { + printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n"); + } +#endif + setup_pdc(); + setup_cmdline(cmdline_p); + collect_boot_cpu_data(); + do_memory_inventory(); /* probe for physical memory */ + parisc_cache_init(); + paging_init(); + +#ifdef CONFIG_CHASSIS_LCD_LED + /* initialize the LCD/LED after boot_cpu_data is available ! */ + led_init(); /* LCD/LED initialization */ +#endif + +#ifdef CONFIG_PA11 + dma_ops_init(); +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; /* we use take_over_console() later ! */ +#endif + +} + +/* + * Display cpu info for all cpu's. + * for parisc this is in processor.c + */ +extern int show_cpuinfo (struct seq_file *m, void *v); + +static void * +c_start (struct seq_file *m, loff_t *pos) +{ + /* Looks like the caller will call repeatedly until we return + * 0, signaling EOF perhaps. This could be used to sequence + * through CPUs for example. Since we print all cpu info in our + * show_cpuinfo() disregarding 'pos' (which I assume is 'v' above) + * we only allow for one "position". */ + return ((long)*pos < 1) ? (void *)1 : NULL; +} + +static void * +c_next (struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void +c_stop (struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo +}; + +static void __init parisc_proc_mkdir(void) +{ + /* + ** Can't call proc_mkdir() until after proc_root_init() has been + ** called by start_kernel(). In other words, this code can't + ** live in arch/.../setup.c because start_parisc() calls + ** start_kernel(). + */ + switch (boot_cpu_data.cpu_type) { + case pcxl: + case pcxl2: + if (NULL == proc_gsc_root) + { + proc_gsc_root = proc_mkdir("bus/gsc", NULL); + } + break; + case pcxt_: + case pcxu: + case pcxu_: + case pcxw: + case pcxw_: + case pcxw2: + if (NULL == proc_runway_root) + { + proc_runway_root = proc_mkdir("bus/runway", NULL); + } + break; + case mako: + if (NULL == proc_mckinley_root) + { + proc_mckinley_root = proc_mkdir("bus/mckinley", NULL); + } + break; + default: + /* FIXME: this was added to prevent the compiler + * complaining about missing pcx, pcxs and pcxt + * I'm assuming they have neither gsc nor runway */ + break; + } +} + +static struct resource central_bus = { + .name = "Central Bus", + .start = F_EXTEND(0xfff80000), + .end = F_EXTEND(0xfffaffff), + .flags = IORESOURCE_MEM, +}; + +static struct resource local_broadcast = { + .name = "Local Broadcast", + .start = F_EXTEND(0xfffb0000), + .end = F_EXTEND(0xfffdffff), + .flags = IORESOURCE_MEM, +}; + +static struct resource global_broadcast = { + .name = "Global Broadcast", + .start = F_EXTEND(0xfffe0000), + .end = F_EXTEND(0xffffffff), + .flags = IORESOURCE_MEM, +}; + +static int __init parisc_init_resources(void) +{ + int result; + + result = request_resource(&iomem_resource, ¢ral_bus); + if (result < 0) { + printk(KERN_ERR + "%s: failed to claim %s address space!\n", + __FILE__, central_bus.name); + return result; + } + + result = request_resource(&iomem_resource, &local_broadcast); + if (result < 0) { + printk(KERN_ERR + "%s: failed to claim %saddress space!\n", + __FILE__, local_broadcast.name); + return result; + } + + result = request_resource(&iomem_resource, &global_broadcast); + if (result < 0) { + printk(KERN_ERR + "%s: failed to claim %s address space!\n", + __FILE__, global_broadcast.name); + return result; + } + + return 0; +} + +extern void gsc_init(void); +extern void processor_init(void); +extern void ccio_init(void); +extern void hppb_init(void); +extern void dino_init(void); +extern void iosapic_init(void); +extern void lba_init(void); +extern void sba_init(void); +extern void eisa_init(void); + +static int __init parisc_init(void) +{ + parisc_proc_mkdir(); + parisc_init_resources(); + do_device_inventory(); /* probe for hardware */ + + parisc_pdc_chassis_init(); + + /* set up a new led state on systems shipped LED State panel */ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BSTART); + + processor_init(); + printk(KERN_INFO "CPU(s): %d x %s at %d.%06d MHz\n", + boot_cpu_data.cpu_count, + boot_cpu_data.cpu_name, + boot_cpu_data.cpu_hz / 1000000, + boot_cpu_data.cpu_hz % 1000000 ); + + parisc_setup_cache_timing(); + + /* These are in a non-obvious order, will fix when we have an iotree */ +#if defined(CONFIG_IOSAPIC) + iosapic_init(); +#endif +#if defined(CONFIG_IOMMU_SBA) + sba_init(); +#endif +#if defined(CONFIG_PCI_LBA) + lba_init(); +#endif + + /* CCIO before any potential subdevices */ +#if defined(CONFIG_IOMMU_CCIO) + ccio_init(); +#endif + + /* + * Need to register Asp & Wax before the EISA adapters for the IRQ + * regions. EISA must come before PCI to be sure it gets IRQ region + * 0. + */ +#if defined(CONFIG_GSC_LASI) || defined(CONFIG_GSC_WAX) + gsc_init(); +#endif +#ifdef CONFIG_EISA + eisa_init(); +#endif + +#if defined(CONFIG_HPPB) + hppb_init(); +#endif + +#if defined(CONFIG_GSC_DINO) + dino_init(); +#endif + +#ifdef CONFIG_CHASSIS_LCD_LED + register_led_regions(); /* register LED port info in procfs */ +#endif + + return 0; +} + +arch_initcall(parisc_init); + diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c new file mode 100644 index 000000000000..9421bb98ea63 --- /dev/null +++ b/arch/parisc/kernel/signal.c @@ -0,0 +1,664 @@ +/* + * linux/arch/parisc/kernel/signal.c: Architecture-specific signal + * handling support. + * + * Copyright (C) 2000 David Huggins-Daines + * Copyright (C) 2000 Linuxcare, Inc. + * + * Based on the ia64, i386, and alpha versions. + * + * Like the IA-64, we are a recent enough port (we are *starting* + * with glibc2.2) that we do not need to support the old non-realtime + * Linux signals. Therefore we don't. HP/UX signals will go in + * arch/parisc/hpux/signal.c when we figure out how to do them. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_COMPAT +#include +#include "signal32.h" +#endif + +#define DEBUG_SIG 0 +#define DEBUG_SIG_LEVEL 2 + +#if DEBUG_SIG +#define DBG(LEVEL, ...) \ + ((DEBUG_SIG_LEVEL >= LEVEL) \ + ? printk(__VA_ARGS__) : (void) 0) +#else +#define DBG(LEVEL, ...) +#endif + + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* gcc will complain if a pointer is cast to an integer of different + * size. If you really need to do this (and we do for an ELF32 user + * application in an ELF64 kernel) then you have to do a cast to an + * integer of the same size first. The A() macro accomplishes + * this. */ +#define A(__x) ((unsigned long)(__x)) + +int do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +#ifdef __LP64__ +#include "sys32.h" +#endif + +asmlinkage int +sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs) +{ + sigset_t saveset, newset; +#ifdef __LP64__ + compat_sigset_t newset32; + + if(personality(current->personality) == PER_LINUX32){ + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(compat_sigset_t)) + return -EINVAL; + if (copy_from_user(&newset32, (compat_sigset_t __user *)unewset, sizeof(newset32))) + return -EFAULT; + sigset_32to64(&newset,&newset32); + + } else +#endif + { + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + } + + sigdelsetmask(&newset, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->gr[28] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(&saveset, regs, 1)) + return -EINTR; + } +} + +/* + * Do a signal return - restore sigcontext. + */ + +/* Trampoline for calling rt_sigreturn() */ +#define INSN_LDI_R25_0 0x34190000 /* ldi 0,%r25 (in_syscall=0) */ +#define INSN_LDI_R25_1 0x34190002 /* ldi 1,%r25 (in_syscall=1) */ +#define INSN_LDI_R20 0x3414015a /* ldi __NR_rt_sigreturn,%r20 */ +#define INSN_BLE_SR2_R0 0xe4008200 /* be,l 0x100(%sr2,%r0),%sr0,%r31 */ +#define INSN_NOP 0x08000240 /* nop */ +/* For debugging */ +#define INSN_DIE_HORRIBLY 0x68000ccc /* stw %r0,0x666(%sr0,%r0) */ + +static long +restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) +{ + long err = 0; + + err |= __copy_from_user(regs->gr, sc->sc_gr, sizeof(regs->gr)); + err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); + err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq)); + err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq)); + err |= __get_user(regs->sar, &sc->sc_sar); + DBG(2,"restore_sigcontext: iaoq is 0x%#lx / 0x%#lx\n", + regs->iaoq[0],regs->iaoq[1]); + DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]); + return err; +} + +void +sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) +{ + struct rt_sigframe __user *frame; + struct siginfo si; + sigset_t set; + unsigned long usp = (regs->gr[30] & ~(0x01UL)); + unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; +#ifdef __LP64__ + compat_sigset_t compat_set; + struct compat_rt_sigframe __user * compat_frame; + + if(personality(current->personality) == PER_LINUX32) + sigframe_size = PARISC_RT_SIGFRAME_SIZE32; +#endif + + + /* Unwind the user stack to get the rt_sigframe structure. */ + frame = (struct rt_sigframe __user *) + (usp - sigframe_size); + DBG(2,"sys_rt_sigreturn: frame is %p\n", frame); + +#ifdef __LP64__ + compat_frame = (struct compat_rt_sigframe __user *)frame; + + if(personality(current->personality) == PER_LINUX32){ + DBG(2,"sys_rt_sigreturn: ELF32 process.\n"); + if (__copy_from_user(&compat_set, &compat_frame->uc.uc_sigmask, sizeof(compat_set))) + goto give_sigsegv; + sigset_32to64(&set,&compat_set); + } else +#endif + { + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto give_sigsegv; + } + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + /* Good thing we saved the old gr[30], eh? */ +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX32){ + DBG(1,"sys_rt_sigreturn: compat_frame->uc.uc_mcontext 0x%p\n", + &compat_frame->uc.uc_mcontext); +// FIXME: Load upper half from register file + if (restore_sigcontext32(&compat_frame->uc.uc_mcontext, + &compat_frame->regs, regs)) + goto give_sigsegv; + DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", + usp, &compat_frame->uc.uc_stack); + if (do_sigaltstack32(&compat_frame->uc.uc_stack, NULL, usp) == -EFAULT) + goto give_sigsegv; + } else +#endif + { + DBG(1,"sys_rt_sigreturn: frame->uc.uc_mcontext 0x%p\n", + &frame->uc.uc_mcontext); + if (restore_sigcontext(&frame->uc.uc_mcontext, regs)) + goto give_sigsegv; + DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", + usp, &frame->uc.uc_stack); + if (do_sigaltstack(&frame->uc.uc_stack, NULL, usp) == -EFAULT) + goto give_sigsegv; + } + + + + /* If we are on the syscall path IAOQ will not be restored, and + * if we are on the interrupt path we must not corrupt gr31. + */ + if (in_syscall) + regs->gr[31] = regs->iaoq[0]; +#if DEBUG_SIG + DBG(1,"sys_rt_sigreturn: returning to %#lx, DUMPING REGS:\n", regs->iaoq[0]); + show_regs(regs); +#endif + return; + +give_sigsegv: + DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); + si.si_signo = SIGSEGV; + si.si_errno = 0; + si.si_code = SI_KERNEL; + si.si_pid = current->pid; + si.si_uid = current->uid; + si.si_addr = &frame->uc; + force_sig_info(SIGSEGV, &si, current); + return; +} + +/* + * Set up a signal frame. + */ + +static inline void __user * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + /*FIXME: ELF32 vs. ELF64 has different frame_size, but since we + don't use the parameter it doesn't matter */ + + DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n", + (unsigned long)ka, sp, frame_size); + + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) + sp = current->sas_ss_sp; /* Stacks grow up! */ + + DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp); + return (void __user *) sp; /* Stacks grow up. Fun. */ +} + +static long +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, int in_syscall) + +{ + unsigned long flags = 0; + long err = 0; + + if (on_sig_stack((unsigned long) sc)) + flags |= PARISC_SC_FLAG_ONSTACK; + if (in_syscall) { + flags |= PARISC_SC_FLAG_IN_SYSCALL; + /* regs->iaoq is undefined in the syscall return path */ + err |= __put_user(regs->gr[31], &sc->sc_iaoq[0]); + err |= __put_user(regs->gr[31]+4, &sc->sc_iaoq[1]); + err |= __put_user(regs->sr[3], &sc->sc_iasq[0]); + err |= __put_user(regs->sr[3], &sc->sc_iasq[1]); + DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (in syscall)\n", + regs->gr[31], regs->gr[31]+4); + } else { + err |= __copy_to_user(sc->sc_iaoq, regs->iaoq, sizeof(regs->iaoq)); + err |= __copy_to_user(sc->sc_iasq, regs->iasq, sizeof(regs->iasq)); + DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (not in syscall)\n", + regs->iaoq[0], regs->iaoq[1]); + } + + err |= __put_user(flags, &sc->sc_flags); + err |= __copy_to_user(sc->sc_gr, regs->gr, sizeof(regs->gr)); + err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); + err |= __put_user(regs->sar, &sc->sc_sar); + DBG(1,"setup_sigcontext: r28 is %ld\n", regs->gr[28]); + + return err; +} + +static long +setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs, int in_syscall) +{ + struct rt_sigframe __user *frame; + unsigned long rp, usp; + unsigned long haddr, sigframe_size; + struct siginfo si; + int err = 0; +#ifdef __LP64__ + compat_int_t compat_val; + struct compat_rt_sigframe __user * compat_frame; + compat_sigset_t compat_set; +#endif + + usp = (regs->gr[30] & ~(0x01UL)); + /*FIXME: frame_size parameter is unused, remove it. */ + frame = get_sigframe(ka, usp, sizeof(*frame)); + + DBG(1,"SETUP_RT_FRAME: START\n"); + DBG(1,"setup_rt_frame: frame %p info %p\n", frame, info); + + +#ifdef __LP64__ + + compat_frame = (struct compat_rt_sigframe __user *)frame; + + if(personality(current->personality) == PER_LINUX32) { + DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &compat_frame->info); + err |= compat_copy_siginfo_to_user(&compat_frame->info, info); + DBG(1,"SETUP_RT_FRAME: 1\n"); + compat_val = (compat_int_t)current->sas_ss_sp; + err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_sp); + DBG(1,"SETUP_RT_FRAME: 2\n"); + compat_val = (compat_int_t)current->sas_ss_size; + err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_size); + DBG(1,"SETUP_RT_FRAME: 3\n"); + compat_val = sas_ss_flags(regs->gr[30]); + err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_flags); + DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &compat_frame->uc); + DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &compat_frame->uc.uc_mcontext); + err |= setup_sigcontext32(&compat_frame->uc.uc_mcontext, + &compat_frame->regs, regs, in_syscall); + sigset_64to32(&compat_set,set); + err |= __copy_to_user(&compat_frame->uc.uc_sigmask, &compat_set, sizeof(compat_set)); + } else +#endif + { + DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &frame->info); + err |= copy_siginfo_to_user(&frame->info, info); + err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __put_user(sas_ss_flags(regs->gr[30]), + &frame->uc.uc_stack.ss_flags); + DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc); + DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall); + /* FIXME: Should probably be converted aswell for the compat case */ + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + } + + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. The first words of tramp are used to + save the previous sigrestartblock trampoline that might be + on the stack. We start the sigreturn trampoline at + SIGRESTARTBLOCK_TRAMP+X. */ + err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0, + &frame->tramp[SIGRESTARTBLOCK_TRAMP+0]); + err |= __put_user(INSN_LDI_R20, + &frame->tramp[SIGRESTARTBLOCK_TRAMP+1]); + err |= __put_user(INSN_BLE_SR2_R0, + &frame->tramp[SIGRESTARTBLOCK_TRAMP+2]); + err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]); + +#if DEBUG_SIG + /* Assert that we're flushing in the correct space... */ + { + int sid; + asm ("mfsp %%sr3,%0" : "=r" (sid)); + DBG(1,"setup_rt_frame: Flushing 64 bytes at space %#x offset %p\n", + sid, frame->tramp); + } +#endif + + flush_user_dcache_range((unsigned long) &frame->tramp[0], + (unsigned long) &frame->tramp[TRAMP_SIZE]); + flush_user_icache_range((unsigned long) &frame->tramp[0], + (unsigned long) &frame->tramp[TRAMP_SIZE]); + + /* TRAMP Words 0-4, Lenght 5 = SIGRESTARTBLOCK_TRAMP + * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP + * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP + */ + rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP]; + + if (err) + goto give_sigsegv; + + haddr = A(ka->sa.sa_handler); + /* The sa_handler may be a pointer to a function descriptor */ +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX32) { +#endif + if (haddr & PA_PLABEL_FDESC) { + Elf32_Fdesc fdesc; + Elf32_Fdesc __user *ufdesc = (Elf32_Fdesc __user *)A(haddr & ~3); + + err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); + + if (err) + goto give_sigsegv; + + haddr = fdesc.addr; + regs->gr[19] = fdesc.gp; + } +#ifdef __LP64__ + } else { + Elf64_Fdesc fdesc; + Elf64_Fdesc __user *ufdesc = (Elf64_Fdesc __user *)A(haddr & ~3); + + err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); + + if (err) + goto give_sigsegv; + + haddr = fdesc.addr; + regs->gr[19] = fdesc.gp; + DBG(1,"setup_rt_frame: 64 bit signal, exe=%#lx, r19=%#lx, in_syscall=%d\n", + haddr, regs->gr[19], in_syscall); + } +#endif + + /* The syscall return path will create IAOQ values from r31. + */ + sigframe_size = PARISC_RT_SIGFRAME_SIZE; +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX32) + sigframe_size = PARISC_RT_SIGFRAME_SIZE32; +#endif + if (in_syscall) { + regs->gr[31] = haddr; +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX) + sigframe_size |= 1; +#endif + } else { + unsigned long psw = USER_PSW; +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX) + psw |= PSW_W; +#endif + + /* If we are singlestepping, arrange a trap to be delivered + when we return to userspace. Note the semantics -- we + should trap before the first insn in the handler is + executed. Ref: + http://sources.redhat.com/ml/gdb/2004-11/msg00245.html + */ + if (pa_psw(current)->r) { + pa_psw(current)->r = 0; + psw |= PSW_R; + mtctl(-1, 0); + } + + regs->gr[0] = psw; + regs->iaoq[0] = haddr | 3; + regs->iaoq[1] = regs->iaoq[0] + 4; + } + + regs->gr[2] = rp; /* userland return pointer */ + regs->gr[26] = sig; /* signal number */ + +#ifdef __LP64__ + if(personality(current->personality) == PER_LINUX32){ + regs->gr[25] = A(&compat_frame->info); /* siginfo pointer */ + regs->gr[24] = A(&compat_frame->uc); /* ucontext pointer */ + } else +#endif + { + regs->gr[25] = A(&frame->info); /* siginfo pointer */ + regs->gr[24] = A(&frame->uc); /* ucontext pointer */ + } + + DBG(1,"setup_rt_frame: making sigreturn frame: %#lx + %#lx = %#lx\n", + regs->gr[30], sigframe_size, + regs->gr[30] + sigframe_size); + /* Raise the user stack pointer to make a proper call frame. */ + regs->gr[30] = (A(frame) + sigframe_size); + + + DBG(1,"setup_rt_frame: sig deliver (%s,%d) frame=0x%p sp=%#lx iaoq=%#lx/%#lx rp=%#lx\n", + current->comm, current->pid, frame, regs->gr[30], + regs->iaoq[0], regs->iaoq[1], rp); + + return 1; + +give_sigsegv: + DBG(1,"setup_rt_frame: sending SIGSEGV\n"); + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; + si.si_signo = SIGSEGV; + si.si_errno = 0; + si.si_code = SI_KERNEL; + si.si_pid = current->pid; + si.si_uid = current->uid; + si.si_addr = frame; + force_sig_info(SIGSEGV, &si, current); + return 0; +} + +/* + * OK, we're invoking a handler. + */ + +static long +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs *regs, int in_syscall) +{ + DBG(1,"handle_signal: sig=%ld, ka=%p, info=%p, oldset=%p, regs=%p\n", + sig, ka, info, oldset, regs); + + /* Set up the stack frame */ + if (!setup_rt_frame(sig, ka, info, oldset, regs, in_syscall)) + return 0; + + if (!(ka->sa.sa_flags & SA_NODEFER)) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + return 1; +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * We need to be able to restore the syscall arguments (r21-r26) to + * restart syscalls. Thus, the syscall path should save them in the + * pt_regs structure (it's okay to do so since they are caller-save + * registers). As noted below, the syscall number gets restored for + * us due to the magic of delayed branching. + */ + +asmlinkage int +do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) +{ + siginfo_t info; + struct k_sigaction ka; + int signr; + + DBG(1,"\ndo_signal: oldset=0x%p, regs=0x%p, sr7 %#lx, in_syscall=%d\n", + oldset, regs, regs->sr[7], in_syscall); + + /* Everyone else checks to see if they are in kernel mode at + this point and exits if that's the case. I'm not sure why + we would be called in that case, but for some reason we + are. */ + + if (!oldset) + oldset = ¤t->blocked; + + DBG(1,"do_signal: oldset %08lx / %08lx\n", + oldset->sig[0], oldset->sig[1]); + + + /* May need to force signal if handle_signal failed to deliver */ + while (1) { + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + DBG(3,"do_signal: signr = %d, regs->gr[28] = %ld\n", signr, regs->gr[28]); + + if (signr <= 0) + break; + + /* Restart a system call if necessary. */ + if (in_syscall) { + /* Check the return code */ + switch (regs->gr[28]) { + case -ERESTART_RESTARTBLOCK: + current_thread_info()->restart_block.fn = do_no_restart_syscall; + case -ERESTARTNOHAND: + DBG(1,"ERESTARTNOHAND: returning -EINTR\n"); + regs->gr[28] = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka.sa.sa_flags & SA_RESTART)) { + DBG(1,"ERESTARTSYS: putting -EINTR\n"); + regs->gr[28] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + /* A syscall is just a branch, so all + we have to do is fiddle the return pointer. */ + regs->gr[31] -= 8; /* delayed branching */ + /* Preserve original r28. */ + regs->gr[28] = regs->orig_r28; + break; + } + } + /* Whee! Actually deliver the signal. If the + delivery failed, we need to continue to iterate in + this loop so we can deliver the SIGSEGV... */ + if (handle_signal(signr, &info, &ka, oldset, regs, in_syscall)) { + DBG(1,KERN_DEBUG "do_signal: Exit (success), regs->gr[28] = %ld\n", + regs->gr[28]); + return 1; + } + } + /* end of while(1) looping forever if we can't force a signal */ + + /* Did we come from a system call? */ + if (in_syscall) { + /* Restart the system call - no handlers present */ + if (regs->gr[28] == -ERESTART_RESTARTBLOCK) { + unsigned int *usp = (unsigned int *)regs->gr[30]; + + /* Setup a trampoline to restart the syscall + * with __NR_restart_syscall + * + * 0: + * 4: <2nd half for 64-bit> + * 8: ldw 0(%sp), %r31 + * 12: be 0x100(%sr2, %r0) + * 16: ldi __NR_restart_syscall, %r20 + */ +#ifndef __LP64__ + put_user(regs->gr[31], &usp[0]); + put_user(0x0fc0109f, &usp[2]); +#else + put_user(regs->gr[31] >> 32, &usp[0]); + put_user(regs->gr[31] & 0xffffffff, &usp[1]); + put_user(0x0fc010df, &usp[2]); +#endif + put_user(0xe0008200, &usp[3]); + put_user(0x34140000, &usp[4]); + + /* Stack is 64-byte aligned, and we only + * need to flush 1 cache line */ + asm("fdc 0(%%sr3, %0)\n" + "fic 0(%%sr3, %0)\n" + "sync\n" + : : "r"(regs->gr[30])); + + regs->gr[31] = regs->gr[30] + 8; + /* Preserve original r28. */ + regs->gr[28] = regs->orig_r28; + } else if (regs->gr[28] == -ERESTARTNOHAND || + regs->gr[28] == -ERESTARTSYS || + regs->gr[28] == -ERESTARTNOINTR) { + /* Hooray for delayed branching. We don't + have to restore %r20 (the system call + number) because it gets loaded in the delay + slot of the branch external instruction. */ + regs->gr[31] -= 8; + /* Preserve original r28. */ + regs->gr[28] = regs->orig_r28; + } + } + + DBG(1,"do_signal: Exit (not delivered), regs->gr[28] = %ld\n", + regs->gr[28]); + + return 0; +} diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c new file mode 100644 index 000000000000..0792e20efef3 --- /dev/null +++ b/arch/parisc/kernel/signal32.c @@ -0,0 +1,400 @@ +/* Signal support for 32-bit kernel builds + * + * Copyright (C) 2001 Matthew Wilcox + * Code was mostly borrowed from kernel/signal.c. + * See kernel/signal.c for additional Copyrights. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "signal32.h" +#include "sys32.h" + +#define DEBUG_COMPAT_SIG 0 +#define DEBUG_COMPAT_SIG_LEVEL 2 + +#if DEBUG_COMPAT_SIG +#define DBG(LEVEL, ...) \ + ((DEBUG_COMPAT_SIG_LEVEL >= LEVEL) \ + ? printk(__VA_ARGS__) : (void) 0) +#else +#define DBG(LEVEL, ...) +#endif + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +inline void +sigset_32to64(sigset_t *s64, compat_sigset_t *s32) +{ + s64->sig[0] = s32->sig[0] | ((unsigned long)s32->sig[1] << 32); +} + +inline void +sigset_64to32(compat_sigset_t *s32, sigset_t *s64) +{ + s32->sig[0] = s64->sig[0] & 0xffffffffUL; + s32->sig[1] = (s64->sig[0] >> 32) & 0xffffffffUL; +} + +static int +put_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) +{ + compat_sigset_t s; + + if (sz != sizeof *set) panic("put_sigset32()"); + sigset_64to32(&s, set); + + return copy_to_user(up, &s, sizeof s); +} + +static int +get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) +{ + compat_sigset_t s; + int r; + + if (sz != sizeof *set) panic("put_sigset32()"); + + if ((r = copy_from_user(&s, up, sz)) == 0) { + sigset_32to64(set, &s); + } + + return r; +} + +int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset, + unsigned int sigsetsize) +{ + sigset_t old_set, new_set; + int ret; + + if (set && get_sigset32(set, &new_set, sigsetsize)) + return -EFAULT; + + KERNEL_SYSCALL(ret, sys_rt_sigprocmask, how, set ? (sigset_t __user *)&new_set : NULL, + oset ? (sigset_t __user *)&old_set : NULL, sigsetsize); + + if (!ret && oset && put_sigset32(oset, &old_set, sigsetsize)) + return -EFAULT; + + return ret; +} + + +int sys32_rt_sigpending(compat_sigset_t __user *uset, unsigned int sigsetsize) +{ + int ret; + sigset_t set; + + KERNEL_SYSCALL(ret, sys_rt_sigpending, (sigset_t __user *)&set, sigsetsize); + + if (!ret && put_sigset32(uset, &set, sigsetsize)) + return -EFAULT; + + return ret; +} + +long +sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, struct sigaction32 __user *oact, + size_t sigsetsize) +{ + struct k_sigaction32 new_sa32, old_sa32; + struct k_sigaction new_sa, old_sa; + int ret = -EINVAL; + + if (act) { + if (copy_from_user(&new_sa32.sa, act, sizeof new_sa32.sa)) + return -EFAULT; + new_sa.sa.sa_handler = (__sighandler_t)(unsigned long)new_sa32.sa.sa_handler; + new_sa.sa.sa_flags = new_sa32.sa.sa_flags; + sigset_32to64(&new_sa.sa.sa_mask, &new_sa32.sa.sa_mask); + } + + ret = do_sigaction(sig, act ? &new_sa : NULL, oact ? &old_sa : NULL); + + if (!ret && oact) { + sigset_64to32(&old_sa32.sa.sa_mask, &old_sa.sa.sa_mask); + old_sa32.sa.sa_flags = old_sa.sa.sa_flags; + old_sa32.sa.sa_handler = (__sighandler_t32)(unsigned long)old_sa.sa.sa_handler; + if (copy_to_user(oact, &old_sa32.sa, sizeof old_sa32.sa)) + return -EFAULT; + } + return ret; +} + +int +do_sigaltstack32 (const compat_stack_t __user *uss32, compat_stack_t __user *uoss32, unsigned long sp) +{ + compat_stack_t ss32, oss32; + stack_t ss, oss; + stack_t *ssp = NULL, *ossp = NULL; + int ret; + + if (uss32) { + if (copy_from_user(&ss32, uss32, sizeof ss32)) + return -EFAULT; + + ss.ss_sp = (void __user *)(unsigned long)ss32.ss_sp; + ss.ss_flags = ss32.ss_flags; + ss.ss_size = ss32.ss_size; + + ssp = &ss; + } + + if (uoss32) + ossp = &oss; + + KERNEL_SYSCALL(ret, do_sigaltstack, (const stack_t __user *)ssp, (stack_t __user *)ossp, sp); + + if (!ret && uoss32) { + oss32.ss_sp = (unsigned int)(unsigned long)oss.ss_sp; + oss32.ss_flags = oss.ss_flags; + oss32.ss_size = oss.ss_size; + if (copy_to_user(uoss32, &oss32, sizeof *uoss32)) + return -EFAULT; + } + + return ret; +} + +long +restore_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, + struct pt_regs *regs) +{ + long err = 0; + compat_uint_t compat_reg; + compat_uint_t compat_regt; + int regn; + + /* When loading 32-bit values into 64-bit registers make + sure to clear the upper 32-bits */ + DBG(2,"restore_sigcontext32: PER_LINUX32 process\n"); + DBG(2,"restore_sigcontext32: sc = 0x%p, rf = 0x%p, regs = 0x%p\n", sc, rf, regs); + DBG(2,"restore_sigcontext32: compat_sigcontext is %#lx bytes\n", sizeof(*sc)); + for(regn=0; regn < 32; regn++){ + err |= __get_user(compat_reg,&sc->sc_gr[regn]); + regs->gr[regn] = compat_reg; + /* Load upper half */ + err |= __get_user(compat_regt,&rf->rf_gr[regn]); + regs->gr[regn] = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(3,"restore_sigcontext32: gr%02d = %#lx (%#x / %#x)\n", + regn, regs->gr[regn], compat_regt, compat_reg); + } + DBG(2,"restore_sigcontext32: sc->sc_fr = 0x%p (%#lx)\n",sc->sc_fr, sizeof(sc->sc_fr)); + /* XXX: BE WARNED FR's are 64-BIT! */ + err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); + + /* Better safe than sorry, pass __get_user two things of + the same size and let gcc do the upward conversion to + 64-bits */ + err |= __get_user(compat_reg, &sc->sc_iaoq[0]); + /* Load upper half */ + err |= __get_user(compat_regt, &rf->rf_iaoq[0]); + regs->iaoq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(2,"restore_sigcontext32: upper half of iaoq[0] = %#lx\n", compat_regt); + DBG(2,"restore_sigcontext32: sc->sc_iaoq[0] = %p => %#x\n", + &sc->sc_iaoq[0], compat_reg); + + err |= __get_user(compat_reg, &sc->sc_iaoq[1]); + /* Load upper half */ + err |= __get_user(compat_regt, &rf->rf_iaoq[1]); + regs->iaoq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(2,"restore_sigcontext32: upper half of iaoq[1] = %#lx\n", compat_regt); + DBG(2,"restore_sigcontext32: sc->sc_iaoq[1] = %p => %#x\n", + &sc->sc_iaoq[1],compat_reg); + DBG(2,"restore_sigcontext32: iaoq is %#lx / %#lx\n", + regs->iaoq[0],regs->iaoq[1]); + + err |= __get_user(compat_reg, &sc->sc_iasq[0]); + /* Load the upper half for iasq */ + err |= __get_user(compat_regt, &rf->rf_iasq[0]); + regs->iasq[0] = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(2,"restore_sigcontext32: upper half of iasq[0] = %#lx\n", compat_regt); + + err |= __get_user(compat_reg, &sc->sc_iasq[1]); + /* Load the upper half for iasq */ + err |= __get_user(compat_regt, &rf->rf_iasq[1]); + regs->iasq[1] = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(2,"restore_sigcontext32: upper half of iasq[1] = %#lx\n", compat_regt); + DBG(2,"restore_sigcontext32: iasq is %#lx / %#lx\n", + regs->iasq[0],regs->iasq[1]); + + err |= __get_user(compat_reg, &sc->sc_sar); + /* Load the upper half for sar */ + err |= __get_user(compat_regt, &rf->rf_sar); + regs->sar = ((u64)compat_regt << 32) | (u64)compat_reg; + DBG(2,"restore_sigcontext32: upper_half & sar = %#lx\n", compat_regt); + DBG(2,"restore_sigcontext32: sar is %#lx\n", regs->sar); + DBG(2,"restore_sigcontext32: r28 is %ld\n", regs->gr[28]); + + return err; +} + +/* + * Set up the sigcontext structure for this process. + * This is not an easy task if the kernel is 64-bit, it will require + * that we examine the process personality to determine if we need to + * truncate for a 32-bit userspace. + */ +long +setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __user * rf, + struct pt_regs *regs, int in_syscall) +{ + compat_int_t flags = 0; + long err = 0; + compat_uint_t compat_reg; + compat_uint_t compat_regb; + int regn; + + if (on_sig_stack((unsigned long) sc)) + flags |= PARISC_SC_FLAG_ONSTACK; + + if (in_syscall) { + + DBG(1,"setup_sigcontext32: in_syscall\n"); + + flags |= PARISC_SC_FLAG_IN_SYSCALL; + /* Truncate gr31 */ + compat_reg = (compat_uint_t)(regs->gr[31]); + /* regs->iaoq is undefined in the syscall return path */ + err |= __put_user(compat_reg, &sc->sc_iaoq[0]); + DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", + &sc->sc_iaoq[0], compat_reg); + + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->gr[32] >> 32); + err |= __put_user(compat_reg, &rf->rf_iaoq[0]); + DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); + + + compat_reg = (compat_uint_t)(regs->gr[31]+4); + err |= __put_user(compat_reg, &sc->sc_iaoq[1]); + DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", + &sc->sc_iaoq[1], compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32); + err |= __put_user(compat_reg, &rf->rf_iaoq[1]); + DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); + + /* Truncate sr3 */ + compat_reg = (compat_uint_t)(regs->sr[3]); + err |= __put_user(compat_reg, &sc->sc_iasq[0]); + err |= __put_user(compat_reg, &sc->sc_iasq[1]); + + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->sr[3] >> 32); + err |= __put_user(compat_reg, &rf->rf_iasq[0]); + err |= __put_user(compat_reg, &rf->rf_iasq[1]); + + DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); + DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); + DBG(1,"setup_sigcontext32: iaoq %#lx / %#lx\n", + regs->gr[31], regs->gr[31]+4); + + } else { + + compat_reg = (compat_uint_t)(regs->iaoq[0]); + err |= __put_user(compat_reg, &sc->sc_iaoq[0]); + DBG(2,"setup_sigcontext32: sc->sc_iaoq[0] = %p <= %#x\n", + &sc->sc_iaoq[0], compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->iaoq[0] >> 32); + err |= __put_user(compat_reg, &rf->rf_iaoq[0]); + DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); + + compat_reg = (compat_uint_t)(regs->iaoq[1]); + err |= __put_user(compat_reg, &sc->sc_iaoq[1]); + DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", + &sc->sc_iaoq[1], compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->iaoq[1] >> 32); + err |= __put_user(compat_reg, &rf->rf_iaoq[1]); + DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); + + + compat_reg = (compat_uint_t)(regs->iasq[0]); + err |= __put_user(compat_reg, &sc->sc_iasq[0]); + DBG(2,"setup_sigcontext32: sc->sc_iasq[0] = %p <= %#x\n", + &sc->sc_iasq[0], compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->iasq[0] >> 32); + err |= __put_user(compat_reg, &rf->rf_iasq[0]); + DBG(2,"setup_sigcontext32: upper half iasq[0] = %#x\n", compat_reg); + + + compat_reg = (compat_uint_t)(regs->iasq[1]); + err |= __put_user(compat_reg, &sc->sc_iasq[1]); + DBG(2,"setup_sigcontext32: sc->sc_iasq[1] = %p <= %#x\n", + &sc->sc_iasq[1], compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->iasq[1] >> 32); + err |= __put_user(compat_reg, &rf->rf_iasq[1]); + DBG(2,"setup_sigcontext32: upper half iasq[1] = %#x\n", compat_reg); + + /* Print out the IAOQ for debugging */ + DBG(1,"setup_sigcontext32: ia0q %#lx / %#lx\n", + regs->iaoq[0], regs->iaoq[1]); + } + + err |= __put_user(flags, &sc->sc_flags); + + DBG(1,"setup_sigcontext32: Truncating general registers.\n"); + + for(regn=0; regn < 32; regn++){ + /* Truncate a general register */ + compat_reg = (compat_uint_t)(regs->gr[regn]); + err |= __put_user(compat_reg, &sc->sc_gr[regn]); + /* Store upper half */ + compat_regb = (compat_uint_t)(regs->gr[regn] >> 32); + err |= __put_user(compat_regb, &rf->rf_gr[regn]); + + /* DEBUG: Write out the "upper / lower" register data */ + DBG(2,"setup_sigcontext32: gr%02d = %#x / %#x\n", regn, + compat_regb, compat_reg); + } + + /* Copy the floating point registers (same size) + XXX: BE WARNED FR's are 64-BIT! */ + DBG(1,"setup_sigcontext32: Copying from regs to sc, " + "sc->sc_fr size = %#lx, regs->fr size = %#lx\n", + sizeof(regs->fr), sizeof(sc->sc_fr)); + err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); + + compat_reg = (compat_uint_t)(regs->sar); + err |= __put_user(compat_reg, &sc->sc_sar); + DBG(2,"setup_sigcontext32: sar is %#x\n", compat_reg); + /* Store upper half */ + compat_reg = (compat_uint_t)(regs->sar >> 32); + err |= __put_user(compat_reg, &rf->rf_sar); + DBG(2,"setup_sigcontext32: upper half sar = %#x\n", compat_reg); + DBG(1,"setup_sigcontext32: r28 is %ld\n", regs->gr[28]); + + return err; +} diff --git a/arch/parisc/kernel/signal32.h b/arch/parisc/kernel/signal32.h new file mode 100644 index 000000000000..4d1569e717cc --- /dev/null +++ b/arch/parisc/kernel/signal32.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2001 Matthew Wilcox + * Copyright (C) 2003 Carlos O'Donell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _PARISC64_KERNEL_SIGNAL32_H +#define _PARISC64_KERNEL_SIGNAL32_H + +#include +#include +#include + +/* ELF32 signal handling */ + +struct k_sigaction32 { + struct compat_sigaction sa; +}; + +void sigset_32to64(sigset_t *s64, compat_sigset_t *s32); +void sigset_64to32(compat_sigset_t *s32, sigset_t *s64); +int do_sigaltstack32 (const compat_stack_t __user *uss32, + compat_stack_t __user *uoss32, unsigned long sp); +long restore_sigcontext32(struct compat_sigcontext __user *sc, + struct compat_regfile __user *rf, + struct pt_regs *regs); +long setup_sigcontext32(struct compat_sigcontext __user *sc, + struct compat_regfile __user *rf, + struct pt_regs *regs, int in_syscall); + +#endif diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c new file mode 100644 index 000000000000..bcc7e83f5142 --- /dev/null +++ b/arch/parisc/kernel/smp.c @@ -0,0 +1,723 @@ +/* +** SMP Support +** +** Copyright (C) 1999 Walt Drummond +** Copyright (C) 1999 David Mosberger-Tang +** Copyright (C) 2001,2004 Grant Grundler +** +** Lots of stuff stolen from arch/alpha/kernel/smp.c +** ...and then parisc stole from arch/ia64/kernel/smp.c. Thanks David! :^) +** +** Thanks to John Curry and Ullas Ponnadi. I learned alot from their work. +** -grant (1/12/2001) +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +*/ +#undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */ + +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include /* for flush_tlb_all() proto/macro */ + +#include +#include /* for CPU_IRQ_REGION and friends */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define kDEBUG 0 + +DEFINE_SPINLOCK(smp_lock); + +volatile struct task_struct *smp_init_current_idle_task; + +static volatile int cpu_now_booting = 0; /* track which CPU is booting */ + +static int parisc_max_cpus = 1; + +/* online cpus are ones that we've managed to bring up completely + * possible cpus are all valid cpu + * present cpus are all detected cpu + * + * On startup we bring up the "possible" cpus. Since we discover + * CPUs later, we add them as hotplug, so the possible cpu mask is + * empty in the beginning. + */ + +cpumask_t cpu_online_map = CPU_MASK_NONE; /* Bitmap of online CPUs */ +cpumask_t cpu_possible_map = CPU_MASK_ALL; /* Bitmap of Present CPUs */ + +EXPORT_SYMBOL(cpu_online_map); +EXPORT_SYMBOL(cpu_possible_map); + + +struct smp_call_struct { + void (*func) (void *info); + void *info; + long wait; + atomic_t unstarted_count; + atomic_t unfinished_count; +}; +static volatile struct smp_call_struct *smp_call_function_data; + +enum ipi_message_type { + IPI_NOP=0, + IPI_RESCHEDULE=1, + IPI_CALL_FUNC, + IPI_CPU_START, + IPI_CPU_STOP, + IPI_CPU_TEST +}; + + +/********** SMP inter processor interrupt and communication routines */ + +#undef PER_CPU_IRQ_REGION +#ifdef PER_CPU_IRQ_REGION +/* XXX REVISIT Ignore for now. +** *May* need this "hook" to register IPI handler +** once we have perCPU ExtIntr switch tables. +*/ +static void +ipi_init(int cpuid) +{ + + /* If CPU is present ... */ +#ifdef ENTRY_SYS_CPUS + /* *and* running (not stopped) ... */ +#error iCOD support wants state checked here. +#endif + +#error verify IRQ_OFFSET(IPI_IRQ) is ipi_interrupt() in new IRQ region + + if(cpu_online(cpuid) ) + { + switch_to_idle_task(current); + } + + return; +} +#endif + + +/* +** Yoink this CPU from the runnable list... +** +*/ +static void +halt_processor(void) +{ +#ifdef ENTRY_SYS_CPUS +#error halt_processor() needs rework +/* +** o migrate I/O interrupts off this CPU. +** o leave IPI enabled - __cli() will disable IPI. +** o leave CPU in online map - just change the state +*/ + cpu_data[this_cpu].state = STATE_STOPPED; + mark_bh(IPI_BH); +#else + /* REVISIT : redirect I/O Interrupts to another CPU? */ + /* REVISIT : does PM *know* this CPU isn't available? */ + cpu_clear(smp_processor_id(), cpu_online_map); + local_irq_disable(); + for (;;) + ; +#endif +} + + +irqreturn_t +ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + int this_cpu = smp_processor_id(); + struct cpuinfo_parisc *p = &cpu_data[this_cpu]; + unsigned long ops; + unsigned long flags; + + /* Count this now; we may make a call that never returns. */ + p->ipi_count++; + + mb(); /* Order interrupt and bit testing. */ + + for (;;) { + spin_lock_irqsave(&(p->lock),flags); + ops = p->pending_ipi; + p->pending_ipi = 0; + spin_unlock_irqrestore(&(p->lock),flags); + + mb(); /* Order bit clearing and data access. */ + + if (!ops) + break; + + while (ops) { + unsigned long which = ffz(~ops); + + switch (which) { + case IPI_RESCHEDULE: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu); +#endif /* kDEBUG */ + ops &= ~(1 << IPI_RESCHEDULE); + /* + * Reschedule callback. Everything to be + * done is done by the interrupt return path. + */ + break; + + case IPI_CALL_FUNC: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu); +#endif /* kDEBUG */ + ops &= ~(1 << IPI_CALL_FUNC); + { + volatile struct smp_call_struct *data; + void (*func)(void *info); + void *info; + int wait; + + data = smp_call_function_data; + func = data->func; + info = data->info; + wait = data->wait; + + mb(); + atomic_dec ((atomic_t *)&data->unstarted_count); + + /* At this point, *data can't + * be relied upon. + */ + + (*func)(info); + + /* Notify the sending CPU that the + * task is done. + */ + mb(); + if (wait) + atomic_dec ((atomic_t *)&data->unfinished_count); + } + break; + + case IPI_CPU_START: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu); +#endif /* kDEBUG */ + ops &= ~(1 << IPI_CPU_START); +#ifdef ENTRY_SYS_CPUS + p->state = STATE_RUNNING; +#endif + break; + + case IPI_CPU_STOP: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu); +#endif /* kDEBUG */ + ops &= ~(1 << IPI_CPU_STOP); +#ifdef ENTRY_SYS_CPUS +#else + halt_processor(); +#endif + break; + + case IPI_CPU_TEST: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu); +#endif /* kDEBUG */ + ops &= ~(1 << IPI_CPU_TEST); + break; + + default: + printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n", + this_cpu, which); + ops &= ~(1 << which); + return IRQ_NONE; + } /* Switch */ + } /* while (ops) */ + } + return IRQ_HANDLED; +} + + +static inline void +ipi_send(int cpu, enum ipi_message_type op) +{ + struct cpuinfo_parisc *p = &cpu_data[cpu]; + unsigned long flags; + + spin_lock_irqsave(&(p->lock),flags); + p->pending_ipi |= 1 << op; + gsc_writel(IPI_IRQ - CPU_IRQ_BASE, cpu_data[cpu].hpa); + spin_unlock_irqrestore(&(p->lock),flags); +} + + +static inline void +send_IPI_single(int dest_cpu, enum ipi_message_type op) +{ + if (dest_cpu == NO_PROC_ID) { + BUG(); + return; + } + + ipi_send(dest_cpu, op); +} + +static inline void +send_IPI_allbutself(enum ipi_message_type op) +{ + int i; + + for (i = 0; i < NR_CPUS; i++) { + if (cpu_online(i) && i != smp_processor_id()) + send_IPI_single(i, op); + } +} + + +inline void +smp_send_stop(void) { send_IPI_allbutself(IPI_CPU_STOP); } + +static inline void +smp_send_start(void) { send_IPI_allbutself(IPI_CPU_START); } + +void +smp_send_reschedule(int cpu) { send_IPI_single(cpu, IPI_RESCHEDULE); } + + +/** + * Run a function on all other CPUs. + * The function to run. This must be fast and non-blocking. + * An arbitrary pointer to pass to the function. + * If true, keep retrying until ready. + * If true, wait until function has completed on other CPUs. + * [RETURNS] 0 on success, else a negative status code. + * + * Does not return until remote CPUs are nearly ready to execute + * or have executed. + */ + +int +smp_call_function (void (*func) (void *info), void *info, int retry, int wait) +{ + struct smp_call_struct data; + unsigned long timeout; + static DEFINE_SPINLOCK(lock); + int retries = 0; + + if (num_online_cpus() < 2) + return 0; + + /* Can deadlock when called with interrupts disabled */ + WARN_ON(irqs_disabled()); + + data.func = func; + data.info = info; + data.wait = wait; + atomic_set(&data.unstarted_count, num_online_cpus() - 1); + atomic_set(&data.unfinished_count, num_online_cpus() - 1); + + if (retry) { + spin_lock (&lock); + while (smp_call_function_data != 0) + barrier(); + } + else { + spin_lock (&lock); + if (smp_call_function_data) { + spin_unlock (&lock); + return -EBUSY; + } + } + + smp_call_function_data = &data; + spin_unlock (&lock); + + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(IPI_CALL_FUNC); + + retry: + /* Wait for response */ + timeout = jiffies + HZ; + while ( (atomic_read (&data.unstarted_count) > 0) && + time_before (jiffies, timeout) ) + barrier (); + + if (atomic_read (&data.unstarted_count) > 0) { + printk(KERN_CRIT "SMP CALL FUNCTION TIMED OUT! (cpu=%d), try %d\n", + smp_processor_id(), ++retries); + goto retry; + } + /* We either got one or timed out. Release the lock */ + + mb(); + smp_call_function_data = NULL; + + while (wait && atomic_read (&data.unfinished_count) > 0) + barrier (); + + return 0; +} + +EXPORT_SYMBOL(smp_call_function); + +/* + * Flush all other CPU's tlb and then mine. Do this with on_each_cpu() + * as we want to ensure all TLB's flushed before proceeding. + */ + +extern void flush_tlb_all_local(void); + +void +smp_flush_tlb_all(void) +{ + on_each_cpu((void (*)(void *))flush_tlb_all_local, NULL, 1, 1); +} + + +void +smp_do_timer(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + struct cpuinfo_parisc *data = &cpu_data[cpu]; + + if (!--data->prof_counter) { + data->prof_counter = data->prof_multiplier; + update_process_times(user_mode(regs)); + } +} + +/* + * Called by secondaries to update state and initialize CPU registers. + */ +static void __init +smp_cpu_init(int cpunum) +{ + extern int init_per_cpu(int); /* arch/parisc/kernel/setup.c */ + extern void init_IRQ(void); /* arch/parisc/kernel/irq.c */ + + /* Set modes and Enable floating point coprocessor */ + (void) init_per_cpu(cpunum); + + disable_sr_hashing(); + + mb(); + + /* Well, support 2.4 linux scheme as well. */ + if (cpu_test_and_set(cpunum, cpu_online_map)) + { + extern void machine_halt(void); /* arch/parisc.../process.c */ + + printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum); + machine_halt(); + } + + /* Initialise the idle task for this CPU */ + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + if(current->mm) + BUG(); + enter_lazy_tlb(&init_mm, current); + + init_IRQ(); /* make sure no IRQ's are enabled or pending */ +} + + +/* + * Slaves start using C here. Indirectly called from smp_slave_stext. + * Do what start_kernel() and main() do for boot strap processor (aka monarch) + */ +void __init smp_callin(void) +{ + int slave_id = cpu_now_booting; +#if 0 + void *istack; +#endif + + smp_cpu_init(slave_id); + +#if 0 /* NOT WORKING YET - see entry.S */ + istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER); + if (istack == NULL) { + printk(KERN_CRIT "Failed to allocate interrupt stack for cpu %d\n",slave_id); + BUG(); + } + mtctl(istack,31); +#endif + + flush_cache_all_local(); /* start with known state */ + flush_tlb_all_local(); + + local_irq_enable(); /* Interrupts have been off until now */ + + cpu_idle(); /* Wait for timer to schedule some work */ + + /* NOTREACHED */ + panic("smp_callin() AAAAaaaaahhhh....\n"); +} + +/* + * Bring one cpu online. + */ +int __init smp_boot_one_cpu(int cpuid) +{ + struct task_struct *idle; + long timeout; + + /* + * Create an idle task for this CPU. Note the address wed* give + * to kernel_thread is irrelevant -- it's going to start + * where OS_BOOT_RENDEVZ vector in SAL says to start. But + * this gets all the other task-y sort of data structures set + * up like we wish. We need to pull the just created idle task + * off the run queue and stuff it into the init_tasks[] array. + * Sheesh . . . + */ + + idle = fork_idle(cpuid); + if (IS_ERR(idle)) + panic("SMP: fork failed for CPU:%d", cpuid); + + idle->thread_info->cpu = cpuid; + + /* Let _start know what logical CPU we're booting + ** (offset into init_tasks[],cpu_data[]) + */ + cpu_now_booting = cpuid; + + /* + ** boot strap code needs to know the task address since + ** it also contains the process stack. + */ + smp_init_current_idle_task = idle ; + mb(); + + printk("Releasing cpu %d now, hpa=%lx\n", cpuid, cpu_data[cpuid].hpa); + + /* + ** This gets PDC to release the CPU from a very tight loop. + ** + ** From the PA-RISC 2.0 Firmware Architecture Reference Specification: + ** "The MEM_RENDEZ vector specifies the location of OS_RENDEZ which + ** is executed after receiving the rendezvous signal (an interrupt to + ** EIR{0}). MEM_RENDEZ is valid only when it is nonzero and the + ** contents of memory are valid." + */ + gsc_writel(TIMER_IRQ - CPU_IRQ_BASE, cpu_data[cpuid].hpa); + mb(); + + /* + * OK, wait a bit for that CPU to finish staggering about. + * Slave will set a bit when it reaches smp_cpu_init(). + * Once the "monarch CPU" sees the bit change, it can move on. + */ + for (timeout = 0; timeout < 10000; timeout++) { + if(cpu_online(cpuid)) { + /* Which implies Slave has started up */ + cpu_now_booting = 0; + smp_init_current_idle_task = NULL; + goto alive ; + } + udelay(100); + barrier(); + } + + put_task_struct(idle); + idle = NULL; + + printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid); + return -1; + +alive: + /* Remember the Slave data */ +#if (kDEBUG>=100) + printk(KERN_DEBUG "SMP: CPU:%d came alive after %ld _us\n", + cpuid, timeout * 100); +#endif /* kDEBUG */ +#ifdef ENTRY_SYS_CPUS + cpu_data[cpuid].state = STATE_RUNNING; +#endif + return 0; +} + +void __devinit smp_prepare_boot_cpu(void) +{ + int bootstrap_processor=cpu_data[0].cpuid; /* CPU ID of BSP */ + +#ifdef ENTRY_SYS_CPUS + cpu_data[0].state = STATE_RUNNING; +#endif + + /* Setup BSP mappings */ + printk("SMP: bootstrap CPU ID is %d\n",bootstrap_processor); + + cpu_set(bootstrap_processor, cpu_online_map); + cpu_set(bootstrap_processor, cpu_present_map); +} + + + +/* +** inventory.c:do_inventory() hasn't yet been run and thus we +** don't 'discover' the additional CPU's until later. +*/ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + cpus_clear(cpu_present_map); + cpu_set(0, cpu_present_map); + + parisc_max_cpus = max_cpus; + if (!max_cpus) + printk(KERN_INFO "SMP mode deactivated.\n"); +} + + +void smp_cpus_done(unsigned int cpu_max) +{ + return; +} + + +int __devinit __cpu_up(unsigned int cpu) +{ + if (cpu != 0 && cpu < parisc_max_cpus) + smp_boot_one_cpu(cpu); + + return cpu_online(cpu) ? 0 : -ENOSYS; +} + + + +#ifdef ENTRY_SYS_CPUS +/* Code goes along with: +** entry.s: ENTRY_NAME(sys_cpus) / * 215, for cpu stat * / +*/ +int sys_cpus(int argc, char **argv) +{ + int i,j=0; + extern int current_pid(int cpu); + + if( argc > 2 ) { + printk("sys_cpus:Only one argument supported\n"); + return (-1); + } + if ( argc == 1 ){ + +#ifdef DUMP_MORE_STATE + for(i=0; ipid)?"RUNNING ": "IDLING ",current->pid); +#endif + } else if ((argc==2) && !(strcmp(argv[1],"-s"))) { +#ifdef DUMP_MORE_STATE + printk("\nCPUSTATE CPUID\n"); + for (i=0;ipid==0)?"RUNNING ":"IDLING "); +#endif + } else { + printk("sys_cpus:Unknown request\n"); + return (-1); + } + return 0; +} +#endif /* ENTRY_SYS_CPUS */ + +#ifdef CONFIG_PROC_FS +int __init +setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} +#endif diff --git a/arch/parisc/kernel/sys32.h b/arch/parisc/kernel/sys32.h new file mode 100644 index 000000000000..06c2090cfaba --- /dev/null +++ b/arch/parisc/kernel/sys32.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2002 Richard Hirst + * Copyright (C) 2003 James Bottomley + * Copyright (C) 2003 Randolph Chung + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _PARISC64_KERNEL_SYS32_H +#define _PARISC64_KERNEL_SYS32_H + +#include + +/* Call a kernel syscall which will use kernel space instead of user + * space for its copy_to/from_user. + */ +#define KERNEL_SYSCALL(ret, syscall, args...) \ +{ \ + mm_segment_t old_fs = get_fs(); \ + set_fs(KERNEL_DS); \ + ret = syscall(args); \ + set_fs (old_fs); \ +} + +#ifdef CONFIG_COMPAT + +typedef __u32 __sighandler_t32; + +struct sigaction32 { + __sighandler_t32 sa_handler; + unsigned int sa_flags; + compat_sigset_t sa_mask; /* mask last for extensibility */ +}; + +#endif + +#endif diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c new file mode 100644 index 000000000000..7958cd8c8bf8 --- /dev/null +++ b/arch/parisc/kernel/sys_parisc.c @@ -0,0 +1,253 @@ + +/* + * PARISC specific syscalls + * + * Copyright (C) 1999-2003 Matthew Wilcox + * Copyright (C) 2000-2003 Paul Bame + * Copyright (C) 2001 Thomas Bogendoerfer + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int sys_pipe(int __user *fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2*sizeof(int))) + error = -EFAULT; + } + return error; +} + +static unsigned long get_unshared_area(unsigned long addr, unsigned long len) +{ + struct vm_area_struct *vma; + + addr = PAGE_ALIGN(addr); + + for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) { + /* At this point: (!vma || addr < vma->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vma || addr + len <= vma->vm_start) + return addr; + addr = vma->vm_end; + } +} + +#define DCACHE_ALIGN(addr) (((addr) + (SHMLBA - 1)) &~ (SHMLBA - 1)) + +/* + * We need to know the offset to use. Old scheme was to look for + * existing mapping and use the same offset. New scheme is to use the + * address of the kernel data structure as the seed for the offset. + * We'll see how that works... + * + * The mapping is cacheline aligned, so there's no information in the bottom + * few bits of the address. We're looking for 10 bits (4MB / 4k), so let's + * drop the bottom 8 bits and use bits 8-17. + */ +static int get_offset(struct address_space *mapping) +{ + int offset = (unsigned long) mapping << (PAGE_SHIFT - 8); + return offset & 0x3FF000; +} + +static unsigned long get_shared_area(struct address_space *mapping, + unsigned long addr, unsigned long len, unsigned long pgoff) +{ + struct vm_area_struct *vma; + int offset = mapping ? get_offset(mapping) : 0; + + addr = DCACHE_ALIGN(addr - offset) + offset; + + for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) { + /* At this point: (!vma || addr < vma->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vma || addr + len <= vma->vm_start) + return addr; + addr = DCACHE_ALIGN(vma->vm_end - offset) + offset; + if (addr < vma->vm_end) /* handle wraparound */ + return -ENOMEM; + } +} + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + if (len > TASK_SIZE) + return -ENOMEM; + if (!addr) + addr = TASK_UNMAPPED_BASE; + + if (filp) { + addr = get_shared_area(filp->f_mapping, addr, len, pgoff); + } else if(flags & MAP_SHARED) { + addr = get_shared_area(NULL, addr, len, pgoff); + } else { + addr = get_unshared_area(addr, len); + } + return addr; +} + +static unsigned long do_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, unsigned long fd, + unsigned long pgoff) +{ + struct file * file = NULL; + unsigned long error = -EBADF; + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file != NULL) + fput(file); +out: + return error; +} + +asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, unsigned long fd, + unsigned long pgoff) +{ + /* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE + we have. */ + return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12)); +} + +asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, unsigned long fd, + unsigned long offset) +{ + if (!(offset & ~PAGE_MASK)) { + return do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + } else { + return -EINVAL; + } +} + +long sys_shmat_wrapper(int shmid, char __user *shmaddr, int shmflag) +{ + unsigned long raddr; + int r; + + r = do_shmat(shmid, shmaddr, shmflag, &raddr); + if (r < 0) + return r; + return raddr; +} + +/* Fucking broken ABI */ + +#ifdef CONFIG_64BIT +asmlinkage long parisc_truncate64(const char __user * path, + unsigned int high, unsigned int low) +{ + return sys_truncate(path, (long)high << 32 | low); +} + +asmlinkage long parisc_ftruncate64(unsigned int fd, + unsigned int high, unsigned int low) +{ + return sys_ftruncate(fd, (long)high << 32 | low); +} + +/* stubs for the benefit of the syscall_table since truncate64 and truncate + * are identical on LP64 */ +asmlinkage long sys_truncate64(const char __user * path, unsigned long length) +{ + return sys_truncate(path, length); +} +asmlinkage long sys_ftruncate64(unsigned int fd, unsigned long length) +{ + return sys_ftruncate(fd, length); +} +asmlinkage long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + return sys_fcntl(fd, cmd, arg); +} +#else + +asmlinkage long parisc_truncate64(const char __user * path, + unsigned int high, unsigned int low) +{ + return sys_truncate64(path, (loff_t)high << 32 | low); +} + +asmlinkage long parisc_ftruncate64(unsigned int fd, + unsigned int high, unsigned int low) +{ + return sys_ftruncate64(fd, (loff_t)high << 32 | low); +} +#endif + +asmlinkage ssize_t parisc_pread64(unsigned int fd, char __user *buf, size_t count, + unsigned int high, unsigned int low) +{ + return sys_pread64(fd, buf, count, (loff_t)high << 32 | low); +} + +asmlinkage ssize_t parisc_pwrite64(unsigned int fd, const char __user *buf, + size_t count, unsigned int high, unsigned int low) +{ + return sys_pwrite64(fd, buf, count, (loff_t)high << 32 | low); +} + +asmlinkage ssize_t parisc_readahead(int fd, unsigned int high, unsigned int low, + size_t count) +{ + return sys_readahead(fd, (loff_t)high << 32 | low, count); +} + +asmlinkage long parisc_fadvise64_64(int fd, + unsigned int high_off, unsigned int low_off, + unsigned int high_len, unsigned int low_len, int advice) +{ + return sys_fadvise64_64(fd, (loff_t)high_off << 32 | low_off, + (loff_t)high_len << 32 | low_len, advice); +} + +asmlinkage unsigned long sys_alloc_hugepages(int key, unsigned long addr, unsigned long len, int prot, int flag) +{ + return -ENOMEM; +} + +asmlinkage int sys_free_hugepages(unsigned long addr) +{ + return -EINVAL; +} diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c new file mode 100644 index 000000000000..613569018410 --- /dev/null +++ b/arch/parisc/kernel/sys_parisc32.c @@ -0,0 +1,720 @@ +/* + * sys_parisc32.c: Conversion between 32bit and 64bit native syscalls. + * + * Copyright (C) 2000-2001 Hewlett Packard Company + * Copyright (C) 2000 John Marvin + * Copyright (C) 2001 Matthew Wilcox + * + * These routines maintain argument size conversion between 32bit and 64bit + * environment. Based heavily on sys_ia32.c and sys_sparc32.c. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "sys32.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x) printk x +#else +#define DBG(x) +#endif + +/* + * sys32_execve() executes a new program. + */ + +asmlinkage int sys32_execve(struct pt_regs *regs) +{ + int error; + char *filename; + + DBG(("sys32_execve(%p) r26 = 0x%lx\n", regs, regs->gr[26])); + filename = getname((const char __user *) regs->gr[26]); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = compat_do_execve(filename, compat_ptr(regs->gr[25]), + compat_ptr(regs->gr[24]), regs); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); +out: + + return error; +} + +asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23, + int r22, int r21, int r20) +{ + printk(KERN_ERR "%s(%d): Unimplemented 32 on 64 syscall #%d!\n", + current->comm, current->pid, r20); + return -ENOSYS; +} + +#ifdef CONFIG_SYSCTL + +struct __sysctl_args32 { + u32 name; + int nlen; + u32 oldval; + u32 oldlenp; + u32 newval; + u32 newlen; + u32 __unused[4]; +}; + +asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) +{ + struct __sysctl_args32 tmp; + int error; + unsigned int oldlen32; + size_t oldlen, *oldlenp = NULL; + unsigned long addr = (((long __force)&args->__unused[0]) + 7) & ~7; + extern int do_sysctl(int *name, int nlen, void *oldval, size_t *oldlenp, + void *newval, size_t newlen); + + DBG(("sysctl32(%p)\n", args)); + + if (copy_from_user(&tmp, args, sizeof(tmp))) + return -EFAULT; + + if (tmp.oldval && tmp.oldlenp) { + /* Duh, this is ugly and might not work if sysctl_args + is in read-only memory, but do_sysctl does indirectly + a lot of uaccess in both directions and we'd have to + basically copy the whole sysctl.c here, and + glibc's __sysctl uses rw memory for the structure + anyway. */ + /* a possibly better hack than this, which will avoid the + * problem if the struct is read only, is to push the + * 'oldlen' value out to the user's stack instead. -PB + */ + if (get_user(oldlen32, (u32 *)(u64)tmp.oldlenp)) + return -EFAULT; + oldlen = oldlen32; + if (put_user(oldlen, (size_t *)addr)) + return -EFAULT; + oldlenp = (size_t *)addr; + } + + lock_kernel(); + error = do_sysctl((int *)(u64)tmp.name, tmp.nlen, (void *)(u64)tmp.oldval, + oldlenp, (void *)(u64)tmp.newval, tmp.newlen); + unlock_kernel(); + if (oldlenp) { + if (!error) { + if (get_user(oldlen, (size_t *)addr)) { + error = -EFAULT; + } else { + oldlen32 = oldlen; + if (put_user(oldlen32, (u32 *)(u64)tmp.oldlenp)) + error = -EFAULT; + } + } + if (copy_to_user(&args->__unused[0], tmp.__unused, sizeof(tmp.__unused))) + error = -EFAULT; + } + return error; +} + +#endif /* CONFIG_SYSCTL */ + +asmlinkage long sys32_sched_rr_get_interval(pid_t pid, + struct compat_timespec __user *interval) +{ + struct timespec t; + int ret; + + KERNEL_SYSCALL(ret, sys_sched_rr_get_interval, pid, (struct timespec __user *)&t); + if (put_compat_timespec(&t, interval)) + return -EFAULT; + return ret; +} + +static int +put_compat_timeval(struct compat_timeval __user *u, struct timeval *t) +{ + struct compat_timeval t32; + t32.tv_sec = t->tv_sec; + t32.tv_usec = t->tv_usec; + return copy_to_user(u, &t32, sizeof t32); +} + +static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i) +{ + long usec; + + if (__get_user(o->tv_sec, &i->tv_sec)) + return -EFAULT; + if (__get_user(usec, &i->tv_usec)) + return -EFAULT; + o->tv_nsec = usec * 1000; + return 0; +} + +asmlinkage int +sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz) +{ + extern void do_gettimeofday(struct timeval *tv); + + if (tv) { + struct timeval ktv; + do_gettimeofday(&ktv); + if (put_compat_timeval(tv, &ktv)) + return -EFAULT; + } + if (tz) { + extern struct timezone sys_tz; + if (copy_to_user(tz, &sys_tz, sizeof(sys_tz))) + return -EFAULT; + } + return 0; +} + +asmlinkage +int sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz) +{ + struct timespec kts; + struct timezone ktz; + + if (tv) { + if (get_ts32(&kts, tv)) + return -EFAULT; + } + if (tz) { + if (copy_from_user(&ktz, tz, sizeof(ktz))) + return -EFAULT; + } + + return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); +} + +int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) +{ + int err; + + if (stat->size > MAX_NON_LFS || !new_valid_dev(stat->dev) || + !new_valid_dev(stat->rdev)) + return -EOVERFLOW; + + err = put_user(new_encode_dev(stat->dev), &statbuf->st_dev); + err |= put_user(stat->ino, &statbuf->st_ino); + err |= put_user(stat->mode, &statbuf->st_mode); + err |= put_user(stat->nlink, &statbuf->st_nlink); + err |= put_user(0, &statbuf->st_reserved1); + err |= put_user(0, &statbuf->st_reserved2); + err |= put_user(new_encode_dev(stat->rdev), &statbuf->st_rdev); + err |= put_user(stat->size, &statbuf->st_size); + err |= put_user(stat->atime.tv_sec, &statbuf->st_atime); + err |= put_user(stat->atime.tv_nsec, &statbuf->st_atime_nsec); + err |= put_user(stat->mtime.tv_sec, &statbuf->st_mtime); + err |= put_user(stat->mtime.tv_nsec, &statbuf->st_mtime_nsec); + err |= put_user(stat->ctime.tv_sec, &statbuf->st_ctime); + err |= put_user(stat->ctime.tv_nsec, &statbuf->st_ctime_nsec); + err |= put_user(stat->blksize, &statbuf->st_blksize); + err |= put_user(stat->blocks, &statbuf->st_blocks); + err |= put_user(0, &statbuf->__unused1); + err |= put_user(0, &statbuf->__unused2); + err |= put_user(0, &statbuf->__unused3); + err |= put_user(0, &statbuf->__unused4); + err |= put_user(0, &statbuf->__unused5); + err |= put_user(0, &statbuf->st_fstype); /* not avail */ + err |= put_user(0, &statbuf->st_realdev); /* not avail */ + err |= put_user(0, &statbuf->st_basemode); /* not avail */ + err |= put_user(0, &statbuf->st_spareshort); + err |= put_user(stat->uid, &statbuf->st_uid); + err |= put_user(stat->gid, &statbuf->st_gid); + err |= put_user(0, &statbuf->st_spare4[0]); + err |= put_user(0, &statbuf->st_spare4[1]); + err |= put_user(0, &statbuf->st_spare4[2]); + + return err; +} + +struct linux32_dirent { + u32 d_ino; + compat_off_t d_off; + u16 d_reclen; + char d_name[1]; +}; + +struct old_linux32_dirent { + u32 d_ino; + u32 d_offset; + u16 d_namlen; + char d_name[1]; +}; + +struct getdents32_callback { + struct linux32_dirent __user * current_dir; + struct linux32_dirent __user * previous; + int count; + int error; +}; + +struct readdir32_callback { + struct old_linux32_dirent __user * dirent; + int count; +}; + +#define ROUND_UP(x,a) ((__typeof__(x))(((unsigned long)(x) + ((a) - 1)) & ~((a) - 1))) +#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de))) +static int +filldir32 (void *__buf, const char *name, int namlen, loff_t offset, ino_t ino, + unsigned int d_type) +{ + struct linux32_dirent __user * dirent; + struct getdents32_callback * buf = (struct getdents32_callback *) __buf; + int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1, 4); + + buf->error = -EINVAL; /* only used if we fail.. */ + if (reclen > buf->count) + return -EINVAL; + dirent = buf->previous; + if (dirent) + put_user(offset, &dirent->d_off); + dirent = buf->current_dir; + buf->previous = dirent; + put_user(ino, &dirent->d_ino); + put_user(reclen, &dirent->d_reclen); + copy_to_user(dirent->d_name, name, namlen); + put_user(0, dirent->d_name + namlen); + dirent = ((void __user *)dirent) + reclen; + buf->current_dir = dirent; + buf->count -= reclen; + return 0; +} + +asmlinkage long +sys32_getdents (unsigned int fd, void __user * dirent, unsigned int count) +{ + struct file * file; + struct linux32_dirent __user * lastdirent; + struct getdents32_callback buf; + int error; + + error = -EBADF; + file = fget(fd); + if (!file) + goto out; + + buf.current_dir = (struct linux32_dirent __user *) dirent; + buf.previous = NULL; + buf.count = count; + buf.error = 0; + + error = vfs_readdir(file, filldir32, &buf); + if (error < 0) + goto out_putf; + error = buf.error; + lastdirent = buf.previous; + if (lastdirent) { + put_user(file->f_pos, &lastdirent->d_off); + error = count - buf.count; + } + +out_putf: + fput(file); +out: + return error; +} + +static int +fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, ino_t ino, + unsigned int d_type) +{ + struct readdir32_callback * buf = (struct readdir32_callback *) __buf; + struct old_linux32_dirent __user * dirent; + + if (buf->count) + return -EINVAL; + buf->count++; + dirent = buf->dirent; + put_user(ino, &dirent->d_ino); + put_user(offset, &dirent->d_offset); + put_user(namlen, &dirent->d_namlen); + copy_to_user(dirent->d_name, name, namlen); + put_user(0, dirent->d_name + namlen); + return 0; +} + +asmlinkage long +sys32_readdir (unsigned int fd, void __user * dirent, unsigned int count) +{ + int error; + struct file * file; + struct readdir32_callback buf; + + error = -EBADF; + file = fget(fd); + if (!file) + goto out; + + buf.count = 0; + buf.dirent = dirent; + + error = vfs_readdir(file, fillonedir32, &buf); + if (error >= 0) + error = buf.count; + fput(file); +out: + return error; +} + +/*** copied from mips64 ***/ +/* + * Ooo, nasty. We need here to frob 32-bit unsigned longs to + * 64-bit unsigned longs. + */ + +static inline int +get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) +{ + n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); + if (ufdset) { + unsigned long odd; + + if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32))) + return -EFAULT; + + odd = n & 1UL; + n &= ~1UL; + while (n) { + unsigned long h, l; + __get_user(l, ufdset); + __get_user(h, ufdset+1); + ufdset += 2; + *fdset++ = h << 32 | l; + n -= 2; + } + if (odd) + __get_user(*fdset, ufdset); + } else { + /* Tricky, must clear full unsigned long in the + * kernel fdset at the end, this makes sure that + * actually happens. + */ + memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32)); + } + return 0; +} + +static inline void +set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset) +{ + unsigned long odd; + n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32)); + + if (!ufdset) + return; + + odd = n & 1UL; + n &= ~1UL; + while (n) { + unsigned long h, l; + l = *fdset++; + h = l >> 32; + __put_user(l, ufdset); + __put_user(h, ufdset+1); + ufdset += 2; + n -= 2; + } + if (odd) + __put_user(*fdset, ufdset); +} + +struct msgbuf32 { + int mtype; + char mtext[1]; +}; + +asmlinkage long sys32_msgsnd(int msqid, + struct msgbuf32 __user *umsgp32, + size_t msgsz, int msgflg) +{ + struct msgbuf *mb; + struct msgbuf32 mb32; + int err; + + if ((mb = kmalloc(msgsz + sizeof *mb + 4, GFP_KERNEL)) == NULL) + return -ENOMEM; + + err = get_user(mb32.mtype, &umsgp32->mtype); + mb->mtype = mb32.mtype; + err |= copy_from_user(mb->mtext, &umsgp32->mtext, msgsz); + + if (err) + err = -EFAULT; + else + KERNEL_SYSCALL(err, sys_msgsnd, msqid, (struct msgbuf __user *)mb, msgsz, msgflg); + + kfree(mb); + return err; +} + +asmlinkage long sys32_msgrcv(int msqid, + struct msgbuf32 __user *umsgp32, + size_t msgsz, long msgtyp, int msgflg) +{ + struct msgbuf *mb; + struct msgbuf32 mb32; + int err, len; + + if ((mb = kmalloc(msgsz + sizeof *mb + 4, GFP_KERNEL)) == NULL) + return -ENOMEM; + + KERNEL_SYSCALL(err, sys_msgrcv, msqid, (struct msgbuf __user *)mb, msgsz, msgtyp, msgflg); + + if (err >= 0) { + len = err; + mb32.mtype = mb->mtype; + err = put_user(mb32.mtype, &umsgp32->mtype); + err |= copy_to_user(&umsgp32->mtext, mb->mtext, len); + if (err) + err = -EFAULT; + else + err = len; + } + + kfree(mb); + return err; +} + +asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) +{ + mm_segment_t old_fs = get_fs(); + int ret; + off_t of; + + if (offset && get_user(of, offset)) + return -EFAULT; + + set_fs(KERNEL_DS); + ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL, count); + set_fs(old_fs); + + if (offset && put_user(of, offset)) + return -EFAULT; + + return ret; +} + +asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset, s32 count) +{ + mm_segment_t old_fs = get_fs(); + int ret; + loff_t lof; + + if (offset && get_user(lof, offset)) + return -EFAULT; + + set_fs(KERNEL_DS); + ret = sys_sendfile64(out_fd, in_fd, offset ? (loff_t __user *)&lof : NULL, count); + set_fs(old_fs); + + if (offset && put_user(lof, offset)) + return -EFAULT; + + return ret; +} + + +struct timex32 { + unsigned int modes; /* mode selector */ + int offset; /* time offset (usec) */ + int freq; /* frequency offset (scaled ppm) */ + int maxerror; /* maximum error (usec) */ + int esterror; /* estimated error (usec) */ + int status; /* clock command/status */ + int constant; /* pll time constant */ + int precision; /* clock precision (usec) (read only) */ + int tolerance; /* clock frequency tolerance (ppm) + * (read only) + */ + struct compat_timeval time; /* (read only) */ + int tick; /* (modified) usecs between clock ticks */ + + int ppsfreq; /* pps frequency (scaled ppm) (ro) */ + int jitter; /* pps jitter (us) (ro) */ + int shift; /* interval duration (s) (shift) (ro) */ + int stabil; /* pps stability (scaled ppm) (ro) */ + int jitcnt; /* jitter limit exceeded (ro) */ + int calcnt; /* calibration intervals (ro) */ + int errcnt; /* calibration errors (ro) */ + int stbcnt; /* stability limit exceeded (ro) */ + + int :32; int :32; int :32; int :32; + int :32; int :32; int :32; int :32; + int :32; int :32; int :32; int :32; +}; + +asmlinkage long sys32_adjtimex(struct timex32 __user *txc_p32) +{ + struct timex txc; + struct timex32 t32; + int ret; + extern int do_adjtimex(struct timex *txc); + + if(copy_from_user(&t32, txc_p32, sizeof(struct timex32))) + return -EFAULT; +#undef CP +#define CP(x) txc.x = t32.x + CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); + CP(status); CP(constant); CP(precision); CP(tolerance); + CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); + CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); + CP(stbcnt); + ret = do_adjtimex(&txc); +#undef CP +#define CP(x) t32.x = txc.x + CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); + CP(status); CP(constant); CP(precision); CP(tolerance); + CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); + CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); + CP(stbcnt); + return copy_to_user(txc_p32, &t32, sizeof(struct timex32)) ? -EFAULT : ret; +} + + +struct sysinfo32 { + s32 uptime; + u32 loads[3]; + u32 totalram; + u32 freeram; + u32 sharedram; + u32 bufferram; + u32 totalswap; + u32 freeswap; + unsigned short procs; + u32 totalhigh; + u32 freehigh; + u32 mem_unit; + char _f[12]; +}; + +/* We used to call sys_sysinfo and translate the result. But sys_sysinfo + * undoes the good work done elsewhere, and rather than undoing the + * damage, I decided to just duplicate the code from sys_sysinfo here. + */ + +asmlinkage int sys32_sysinfo(struct sysinfo32 __user *info) +{ + struct sysinfo val; + int err; + unsigned long seq; + + /* We don't need a memset here because we copy the + * struct to userspace once element at a time. + */ + + do { + seq = read_seqbegin(&xtime_lock); + val.uptime = jiffies / HZ; + + val.loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT); + val.loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT); + val.loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT); + + val.procs = nr_threads; + } while (read_seqretry(&xtime_lock, seq)); + + + si_meminfo(&val); + si_swapinfo(&val); + + err = put_user (val.uptime, &info->uptime); + err |= __put_user (val.loads[0], &info->loads[0]); + err |= __put_user (val.loads[1], &info->loads[1]); + err |= __put_user (val.loads[2], &info->loads[2]); + err |= __put_user (val.totalram, &info->totalram); + err |= __put_user (val.freeram, &info->freeram); + err |= __put_user (val.sharedram, &info->sharedram); + err |= __put_user (val.bufferram, &info->bufferram); + err |= __put_user (val.totalswap, &info->totalswap); + err |= __put_user (val.freeswap, &info->freeswap); + err |= __put_user (val.procs, &info->procs); + err |= __put_user (val.totalhigh, &info->totalhigh); + err |= __put_user (val.freehigh, &info->freehigh); + err |= __put_user (val.mem_unit, &info->mem_unit); + return err ? -EFAULT : 0; +} + + +/* lseek() needs a wrapper because 'offset' can be negative, but the top + * half of the argument has been zeroed by syscall.S. + */ + +asmlinkage int sys32_lseek(unsigned int fd, int offset, unsigned int origin) +{ + return sys_lseek(fd, offset, origin); +} + +asmlinkage long sys32_semctl(int semid, int semnum, int cmd, union semun arg) +{ + union semun u; + + if (cmd == SETVAL) { + /* Ugh. arg is a union of int,ptr,ptr,ptr, so is 8 bytes. + * The int should be in the first 4, but our argument + * frobbing has left it in the last 4. + */ + u.val = *((int *)&arg + 1); + return sys_semctl (semid, semnum, cmd, u); + } + return sys_semctl (semid, semnum, cmd, arg); +} + +long sys32_lookup_dcookie(u32 cookie_high, u32 cookie_low, char __user *buf, + size_t len) +{ + return sys_lookup_dcookie((u64)cookie_high << 32 | cookie_low, + buf, len); +} diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S new file mode 100644 index 000000000000..32ea701f4d20 --- /dev/null +++ b/arch/parisc/kernel/syscall.S @@ -0,0 +1,703 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * System call entry code Copyright (c) Matthew Wilcox 1999 + * Licensed under the GNU GPL. + * thanks to Philipp Rumpf, Mike Shaver and various others + * sorry about the wall, puffin.. + */ + +#include +#include +#include +#include +#include + +#include +#include + + /* We fill the empty parts of the gateway page with + * something that will kill the kernel or a + * userspace application. + */ +#define KILL_INSN break 0,0 + +#include /* for CONFIG_SMP */ + +#ifdef __LP64__ + .level 2.0w +#else + .level 1.1 +#endif + +#ifndef __LP64__ + .macro fixup_branch,lbl + b \lbl + .endm +#else + .macro fixup_branch,lbl + ldil L%\lbl, %r1 + ldo R%\lbl(%r1), %r1 + bv,n %r0(%r1) + .endm +#endif + + .text + + .import syscall_exit,code + .import syscall_exit_rfi,code + .export linux_gateway_page + + /* Linux gateway page is aliased to virtual page 0 in the kernel + * address space. Since it is a gateway page it cannot be + * dereferenced, so null pointers will still fault. We start + * the actual entry point at 0x100. We put break instructions + * at the beginning of the page to trap null indirect function + * pointers. + */ + + .align 4096 +linux_gateway_page: + + /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */ + .rept 44 + KILL_INSN + .endr + + /* ADDRESS 0xb0 to 0xb4, lws uses 1 insns for entry */ + /* Light-weight-syscall entry must always be located at 0xb0 */ + /* WARNING: Keep this number updated with table size changes */ +#define __NR_lws_entries (2) + +lws_entry: + /* Unconditional branch to lws_start, located on the + same gateway page */ + b,n lws_start + + /* Fill from 0xb4 to 0xe0 */ + .rept 11 + KILL_INSN + .endr + + /* This function MUST be located at 0xe0 for glibc's threading + mechanism to work. DO NOT MOVE THIS CODE EVER! */ +set_thread_pointer: + gate .+8, %r0 /* increase privilege */ + depi 3, 31, 2, %r31 /* Ensure we return into user mode. */ + be 0(%sr7,%r31) /* return to user space */ + mtctl %r26, %cr27 /* move arg0 to the control register */ + + /* Increase the chance of trapping if random jumps occur to this + address, fill from 0xf0 to 0x100 */ + .rept 4 + KILL_INSN + .endr + +/* This address must remain fixed at 0x100 for glibc's syscalls to work */ + .align 256 +linux_gateway_entry: + gate .+8, %r0 /* become privileged */ + mtsp %r0,%sr4 /* get kernel space into sr4 */ + mtsp %r0,%sr5 /* get kernel space into sr5 */ + mtsp %r0,%sr6 /* get kernel space into sr6 */ + mfsp %sr7,%r1 /* save user sr7 */ + mtsp %r1,%sr3 /* and store it in sr3 */ + +#ifdef __LP64__ + /* for now we can *always* set the W bit on entry to the syscall + * since we don't support wide userland processes. We could + * also save the current SM other than in r0 and restore it on + * exit from the syscall, and also use that value to know + * whether to do narrow or wide syscalls. -PB + */ + ssm PSW_SM_W, %r1 + extrd,u %r1,PSW_W_BIT,1,%r1 + /* sp must be aligned on 4, so deposit the W bit setting into + * the bottom of sp temporarily */ + or,ev %r1,%r30,%r30 + b,n 1f + /* The top halves of argument registers must be cleared on syscall + * entry from narrow executable. + */ + depdi 0, 31, 32, %r26 + depdi 0, 31, 32, %r25 + depdi 0, 31, 32, %r24 + depdi 0, 31, 32, %r23 + depdi 0, 31, 32, %r22 + depdi 0, 31, 32, %r21 +1: +#endif + mfctl %cr30,%r1 + xor %r1,%r30,%r30 /* ye olde xor trick */ + xor %r1,%r30,%r1 + xor %r1,%r30,%r30 + + ldo THREAD_SZ_ALGN+FRAME_SIZE(%r30),%r30 /* set up kernel stack */ + + /* N.B.: It is critical that we don't set sr7 to 0 until r30 + * contains a valid kernel stack pointer. It is also + * critical that we don't start using the kernel stack + * until after sr7 has been set to 0. + */ + + mtsp %r0,%sr7 /* get kernel space into sr7 */ + STREGM %r1,FRAME_SIZE(%r30) /* save r1 (usp) here for now */ + mfctl %cr30,%r1 /* get task ptr in %r1 */ + LDREG TI_TASK(%r1),%r1 + + /* Save some registers for sigcontext and potential task + switch (see entry.S for the details of which ones are + saved/restored). TASK_PT_PSW is zeroed so we can see whether + a process is on a syscall or not. For an interrupt the real + PSW value is stored. This is needed for gdb and sys_ptrace. */ + STREG %r0, TASK_PT_PSW(%r1) + STREG %r2, TASK_PT_GR2(%r1) /* preserve rp */ + STREG %r19, TASK_PT_GR19(%r1) + + LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */ +#ifdef __LP64__ + extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */ +#if 0 + xor %r19,%r2,%r2 /* clear bottom bit */ + depd,z %r19,1,1,%r19 + std %r19,TASK_PT_PSW(%r1) +#endif +#endif + STREG %r2, TASK_PT_GR30(%r1) /* ... and save it */ + + STREG %r20, TASK_PT_GR20(%r1) + STREG %r21, TASK_PT_GR21(%r1) + STREG %r22, TASK_PT_GR22(%r1) + STREG %r23, TASK_PT_GR23(%r1) /* 4th argument */ + STREG %r24, TASK_PT_GR24(%r1) /* 3rd argument */ + STREG %r25, TASK_PT_GR25(%r1) /* 2nd argument */ + STREG %r26, TASK_PT_GR26(%r1) /* 1st argument */ + STREG %r27, TASK_PT_GR27(%r1) /* user dp */ + STREG %r28, TASK_PT_GR28(%r1) /* return value 0 */ + STREG %r28, TASK_PT_ORIG_R28(%r1) /* return value 0 (saved for signals) */ + STREG %r29, TASK_PT_GR29(%r1) /* return value 1 */ + STREG %r31, TASK_PT_GR31(%r1) /* preserve syscall return ptr */ + + ldo TASK_PT_FR0(%r1), %r27 /* save fpregs from the kernel */ + save_fp %r27 /* or potential task switch */ + + mfctl %cr11, %r27 /* i.e. SAR */ + STREG %r27, TASK_PT_SAR(%r1) + + loadgp + +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ + copy %r19,%r2 /* W bit back to r2 */ +#else + /* no need to save these on stack in wide mode because the first 8 + * args are passed in registers */ + stw %r22, -52(%r30) /* 5th argument */ + stw %r21, -56(%r30) /* 6th argument */ +#endif + + /* Are we being ptraced? */ + mfctl %cr30, %r1 + LDREG TI_TASK(%r1),%r1 + LDREG TASK_PTRACE(%r1), %r1 + bb,<,n %r1,31,.Ltracesys + + /* Note! We cannot use the syscall table that is mapped + nearby since the gateway page is mapped execute-only. */ + +#ifdef __LP64__ + ldil L%sys_call_table, %r1 + or,= %r2,%r2,%r2 + addil L%(sys_call_table64-sys_call_table), %r1 + ldo R%sys_call_table(%r1), %r19 + or,= %r2,%r2,%r2 + ldo R%sys_call_table64(%r1), %r19 +#else + ldil L%sys_call_table, %r1 + ldo R%sys_call_table(%r1), %r19 +#endif + comiclr,>>= __NR_Linux_syscalls, %r20, %r0 + b,n .Lsyscall_nosys + + LDREGX %r20(%r19), %r19 + + /* If this is a sys_rt_sigreturn call, and the signal was received + * when not in_syscall, then we want to return via syscall_exit_rfi, + * not syscall_exit. Signal no. in r20, in_syscall in r25 (see + * trampoline code in signal.c). + */ + ldi __NR_rt_sigreturn,%r2 + comb,= %r2,%r20,.Lrt_sigreturn +.Lin_syscall: + ldil L%syscall_exit,%r2 + be 0(%sr7,%r19) + ldo R%syscall_exit(%r2),%r2 +.Lrt_sigreturn: + comib,<> 0,%r25,.Lin_syscall + ldil L%syscall_exit_rfi,%r2 + be 0(%sr7,%r19) + ldo R%syscall_exit_rfi(%r2),%r2 + + /* Note! Because we are not running where we were linked, any + calls to functions external to this file must be indirect. To + be safe, we apply the opposite rule to functions within this + file, with local labels given to them to ensure correctness. */ + +.Lsyscall_nosys: +syscall_nosys: + ldil L%syscall_exit,%r1 + be R%syscall_exit(%sr7,%r1) + ldo -ENOSYS(%r0),%r28 /* set errno */ + + +/* Warning! This trace code is a virtual duplicate of the code above so be + * sure to maintain both! */ +.Ltracesys: +tracesys: + /* Need to save more registers so the debugger can see where we + * are. This saves only the lower 8 bits of PSW, so that the C + * bit is still clear on syscalls, and the D bit is set if this + * full register save path has been executed. We check the D + * bit on syscall_return_rfi to determine which registers to + * restore. An interrupt results in a full PSW saved with the + * C bit set, a non-straced syscall entry results in C and D clear + * in the saved PSW. + */ + ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ + LDREG TI_TASK(%r1), %r1 + ssm 0,%r2 + STREG %r2,TASK_PT_PSW(%r1) /* Lower 8 bits only!! */ + mfsp %sr0,%r2 + STREG %r2,TASK_PT_SR0(%r1) + mfsp %sr1,%r2 + STREG %r2,TASK_PT_SR1(%r1) + mfsp %sr2,%r2 + STREG %r2,TASK_PT_SR2(%r1) + mfsp %sr3,%r2 + STREG %r2,TASK_PT_SR3(%r1) + STREG %r2,TASK_PT_SR4(%r1) + STREG %r2,TASK_PT_SR5(%r1) + STREG %r2,TASK_PT_SR6(%r1) + STREG %r2,TASK_PT_SR7(%r1) + STREG %r2,TASK_PT_IASQ0(%r1) + STREG %r2,TASK_PT_IASQ1(%r1) + LDREG TASK_PT_GR31(%r1),%r2 + STREG %r2,TASK_PT_IAOQ0(%r1) + ldo 4(%r2),%r2 + STREG %r2,TASK_PT_IAOQ1(%r1) + ldo TASK_REGS(%r1),%r2 + /* reg_save %r2 */ + STREG %r3,PT_GR3(%r2) + STREG %r4,PT_GR4(%r2) + STREG %r5,PT_GR5(%r2) + STREG %r6,PT_GR6(%r2) + STREG %r7,PT_GR7(%r2) + STREG %r8,PT_GR8(%r2) + STREG %r9,PT_GR9(%r2) + STREG %r10,PT_GR10(%r2) + STREG %r11,PT_GR11(%r2) + STREG %r12,PT_GR12(%r2) + STREG %r13,PT_GR13(%r2) + STREG %r14,PT_GR14(%r2) + STREG %r15,PT_GR15(%r2) + STREG %r16,PT_GR16(%r2) + STREG %r17,PT_GR17(%r2) + STREG %r18,PT_GR18(%r2) + /* Finished saving things for the debugger */ + + ldil L%syscall_trace,%r1 + ldil L%tracesys_next,%r2 + be R%syscall_trace(%sr7,%r1) + ldo R%tracesys_next(%r2),%r2 + +tracesys_next: + ldil L%sys_call_table,%r1 + ldo R%sys_call_table(%r1), %r19 + + ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ + LDREG TI_TASK(%r1), %r1 + LDREG TASK_PT_GR20(%r1), %r20 + LDREG TASK_PT_GR26(%r1), %r26 /* Restore the users args */ + LDREG TASK_PT_GR25(%r1), %r25 + LDREG TASK_PT_GR24(%r1), %r24 + LDREG TASK_PT_GR23(%r1), %r23 +#ifdef __LP64__ + LDREG TASK_PT_GR22(%r1), %r22 + LDREG TASK_PT_GR21(%r1), %r21 + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + + comiclr,>>= __NR_Linux_syscalls, %r20, %r0 + b,n .Lsyscall_nosys + + LDREGX %r20(%r19), %r19 + + /* If this is a sys_rt_sigreturn call, and the signal was received + * when not in_syscall, then we want to return via syscall_exit_rfi, + * not syscall_exit. Signal no. in r20, in_syscall in r25 (see + * trampoline code in signal.c). + */ + ldi __NR_rt_sigreturn,%r2 + comb,= %r2,%r20,.Ltrace_rt_sigreturn +.Ltrace_in_syscall: + ldil L%tracesys_exit,%r2 + be 0(%sr7,%r19) + ldo R%tracesys_exit(%r2),%r2 + + /* Do *not* call this function on the gateway page, because it + makes a direct call to syscall_trace. */ + +tracesys_exit: + ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ + LDREG TI_TASK(%r1), %r1 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + bl syscall_trace, %r2 + STREG %r28,TASK_PT_GR28(%r1) /* save return value now */ + ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ + LDREG TI_TASK(%r1), %r1 + LDREG TASK_PT_GR28(%r1), %r28 /* Restore return val. */ + + ldil L%syscall_exit,%r1 + be,n R%syscall_exit(%sr7,%r1) + +.Ltrace_rt_sigreturn: + comib,<> 0,%r25,.Ltrace_in_syscall + ldil L%tracesys_sigexit,%r2 + be 0(%sr7,%r19) + ldo R%tracesys_sigexit(%r2),%r2 + +tracesys_sigexit: + ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ + LDREG 0(%r1), %r1 +#ifdef __LP64__ + ldo -16(%r30),%r29 /* Reference param save area */ +#endif + bl syscall_trace, %r2 + nop + + ldil L%syscall_exit_rfi,%r1 + be,n R%syscall_exit_rfi(%sr7,%r1) + + + /********************************************************* + Light-weight-syscall code + + r20 - lws number + r26,r25,r24,r23,r22 - Input registers + r28 - Function return register + r21 - Error code. + + Scracth: Any of the above that aren't being + currently used, including r1. + + Return pointer: r31 (Not usable) + + Error codes returned by entry path: + + ENOSYS - r20 was an invalid LWS number. + + *********************************************************/ +lws_start: + /* Gate and ensure we return to userspace */ + gate .+8, %r0 + depi 3, 31, 2, %r31 /* Ensure we return to userspace */ + +#ifdef __LP64__ + /* FIXME: If we are a 64-bit kernel just + * turn this on unconditionally. + */ + ssm PSW_SM_W, %r1 + extrd,u %r1,PSW_W_BIT,1,%r1 + /* sp must be aligned on 4, so deposit the W bit setting into + * the bottom of sp temporarily */ + or,ev %r1,%r30,%r30 + + /* Clip LWS number to a 32-bit value always */ + depdi 0, 31, 32, %r20 +#endif + + /* Is the lws entry number valid? */ + comiclr,>>= __NR_lws_entries, %r20, %r0 + b,n lws_exit_nosys + + /* WARNING: Trashing sr2 and sr3 */ + mfsp %sr7,%r1 /* get userspace into sr3 */ + mtsp %r1,%sr3 + mtsp %r0,%sr2 /* get kernel space into sr2 */ + + /* Load table start */ + ldil L%lws_table, %r1 + ldo R%lws_table(%r1), %r28 /* Scratch use of r28 */ + LDREGX %r20(%sr2,r28), %r21 /* Scratch use of r21 */ + + /* Jump to lws, lws table pointers already relocated */ + be,n 0(%sr2,%r21) + +lws_exit_nosys: + ldo -ENOSYS(%r0),%r21 /* set errno */ + /* Fall through: Return to userspace */ + +lws_exit: +#ifdef __LP64__ + /* decide whether to reset the wide mode bit + * + * For a syscall, the W bit is stored in the lowest bit + * of sp. Extract it and reset W if it is zero */ + extrd,u,*<> %r30,63,1,%r1 + rsm PSW_SM_W, %r0 + /* now reset the lowest bit of sp if it was set */ + xor %r30,%r1,%r30 +#endif + be,n 0(%sr3, %r31) + + + + /*************************************************** + Implementing CAS as an atomic operation: + + %r26 - Address to examine + %r25 - Old value to check (old) + %r24 - New value to set (new) + %r28 - Return prev through this register. + %r21 - Kernel error code + + If debugging is DISabled: + + %r21 has the following meanings: + + EAGAIN - CAS is busy, ldcw failed, try again. + EFAULT - Read or write failed. + + If debugging is enabled: + + EDEADLOCK - CAS called recursively. + EAGAIN && r28 == 1 - CAS is busy. Lock contended. + EAGAIN && r28 == 2 - CAS is busy. ldcw failed. + EFAULT - Read or write failed. + + Scratch: r20, r28, r1 + + ****************************************************/ + + /* Do not enable LWS debugging */ +#define ENABLE_LWS_DEBUG 0 + + /* ELF64 Process entry path */ +lws_compare_and_swap64: +#ifdef __LP64__ + b,n lws_compare_and_swap +#else + /* If we are not a 64-bit kernel, then we don't + * implement having 64-bit input registers + */ + b,n lws_exit_nosys +#endif + + /* ELF32 Process entry path */ +lws_compare_and_swap32: +#ifdef __LP64__ + /* Clip all the input registers */ + depdi 0, 31, 32, %r26 + depdi 0, 31, 32, %r25 + depdi 0, 31, 32, %r24 +#endif + +lws_compare_and_swap: +#ifdef CONFIG_SMP + /* Load start of lock table */ + ldil L%lws_lock_start, %r20 + ldo R%lws_lock_start(%r20), %r28 + + /* Extract four bits from r26 and hash lock (Bits 4-7) */ + extru %r26, 27, 4, %r20 + + /* Find lock to use, the hash is either one of 0 to + 15, multiplied by 16 (keep it 16-byte aligned) + and add to the lock table offset. */ + shlw %r20, 4, %r20 + add %r20, %r28, %r20 + +# ifdef ENABLE_LWS_DEBUG + /* + DEBUG, check for deadlock! + If the thread register values are the same + then we were the one that locked it last and + this is a recurisve call that will deadlock. + We *must* giveup this call and fail. + */ + ldw 4(%sr2,%r20), %r28 /* Load thread register */ + mfctl %cr27, %r21 /* Get current thread register */ + cmpb,<>,n %r21, %r28, cas_lock /* Called recursive? */ + b lws_exit /* Return error! */ + ldo -EDEADLOCK(%r0), %r21 +cas_lock: + cmpb,=,n %r0, %r28, cas_nocontend /* Is nobody using it? */ + ldo 1(%r0), %r28 /* 1st case */ + b lws_exit /* Contended... */ + ldo -EAGAIN(%r0), %r21 /* Spin in userspace */ +cas_nocontend: +# endif +/* ENABLE_LWS_DEBUG */ + + ldcw 0(%sr2,%r20), %r28 /* Try to acquire the lock */ + cmpb,<>,n %r0, %r28, cas_action /* Did we get it? */ +cas_wouldblock: + ldo 2(%r0), %r28 /* 2nd case */ + b lws_exit /* Contended... */ + ldo -EAGAIN(%r0), %r21 /* Spin in userspace */ +#endif +/* CONFIG_SMP */ + + /* + prev = *addr; + if ( prev == old ) + *addr = new; + return prev; + */ + + /* NOTES: + This all works becuse intr_do_signal + and schedule both check the return iasq + and see that we are on the kernel page + so this process is never scheduled off + or is ever sent any signal of any sort, + thus it is wholly atomic from usrspaces + perspective + */ +cas_action: +#if defined CONFIG_SMP && defined ENABLE_LWS_DEBUG + /* DEBUG */ + mfctl %cr27, %r1 + stw %r1, 4(%sr2,%r20) +#endif + /* The load and store could fail */ +1: ldw 0(%sr3,%r26), %r28 + sub,<> %r28, %r25, %r0 +2: stw %r24, 0(%sr3,%r26) +#ifdef CONFIG_SMP + /* Free lock */ + stw %r20, 0(%sr2,%r20) +# ifdef ENABLE_LWS_DEBUG + /* Clear thread register indicator */ + stw %r0, 4(%sr2,%r20) +# endif +#endif + /* Return to userspace, set no error */ + b lws_exit + copy %r0, %r21 + +3: + /* Error occured on load or store */ +#ifdef CONFIG_SMP + /* Free lock */ + stw %r20, 0(%sr2,%r20) +# ifdef ENABLE_LWS_DEBUG + stw %r0, 4(%sr2,%r20) +# endif +#endif + b lws_exit + ldo -EFAULT(%r0),%r21 /* set errno */ + nop + nop + nop + nop + + /* Two exception table entries, one for the load, + the other for the store. Either return -EFAULT. + Each of the entries must be relocated. */ + .section __ex_table,"aw" +#ifdef __LP64__ + /* Pad the address calculation */ + .word 0,(2b - linux_gateway_page) + .word 0,(3b - linux_gateway_page) +#else + .word (2b - linux_gateway_page) + .word (3b - linux_gateway_page) +#endif + .previous + + .section __ex_table,"aw" +#ifdef __LP64__ + /* Pad the address calculation */ + .word 0,(1b - linux_gateway_page) + .word 0,(3b - linux_gateway_page) +#else + .word (1b - linux_gateway_page) + .word (3b - linux_gateway_page) +#endif + .previous + +end_compare_and_swap: + + /* Make sure nothing else is placed on this page */ + .align 4096 + .export end_linux_gateway_page +end_linux_gateway_page: + + /* Relocate symbols assuming linux_gateway_page is mapped + to virtual address 0x0 */ +#ifdef __LP64__ + /* FIXME: The code will always be on the gateay page + and thus it will be on the first 4k, the + assembler seems to think that the final + subtraction result is only a word in + length, so we pad the value. + */ +#define LWS_ENTRY(_name_) .word 0,(lws_##_name_ - linux_gateway_page) +#else +#define LWS_ENTRY(_name_) .word (lws_##_name_ - linux_gateway_page) +#endif + + .align 4096 + /* Light-weight-syscall table */ + /* Start of lws table. */ + .export lws_table +.Llws_table: +lws_table: + LWS_ENTRY(compare_and_swap32) /* 0 - ELF32 Atomic compare and swap */ + LWS_ENTRY(compare_and_swap64) /* 1 - ELF64 Atomic compare and swap */ + /* End of lws table */ + + .align 4096 + .export sys_call_table +.Lsys_call_table: +sys_call_table: +#include "syscall_table.S" + +#ifdef __LP64__ + .align 4096 + .export sys_call_table64 +.Lsys_call_table64: +sys_call_table64: +#define SYSCALL_TABLE_64BIT +#include "syscall_table.S" +#endif + +#ifdef CONFIG_SMP + /* + All light-weight-syscall atomic operations + will use this set of locks + */ + .section .data + .align 4096 + .export lws_lock_start +.Llws_lock_start: +lws_lock_start: + /* lws locks */ + .align 16 + .rept 16 + /* Keep locks aligned at 16-bytes */ + .word 1 + .word 0 + .word 0 + .word 0 + .endr + .previous +#endif +/* CONFIG_SMP for lws_lock_start */ + +.end + + diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S new file mode 100644 index 000000000000..779b537100ec --- /dev/null +++ b/arch/parisc/kernel/syscall_table.S @@ -0,0 +1,372 @@ +/* System Call Table + * + * Copyright (C) 1999-2004 Matthew Wilcox + * Copyright (C) 2000-2001 John Marvin + * Copyright (C) 2000 Alan Modra + * Copyright (C) 2000-2003 Paul Bame + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 Michael Ang + * Copyright (C) 2000 David Huggins-Daines + * Copyright (C) 2000 Grant Grundler + * Copyright (C) 2001 Richard Hirst + * Copyright (C) 2001-2002 Ryan Bradetich + * Copyright (C) 2001 Helge Deller + * Copyright (C) 2000-2001 Thomas Bogendoerfer + * Copyright (C) 2002 Randolph Chung + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef ENTRY_SAME +#undef ENTRY_DIFF +#undef ENTRY_UHOH +#undef ENTRY_COMP +#undef ENTRY_OURS +#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT) +/* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and + * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific + * implementation is required on wide palinux. Use ENTRY_COMP where + * the compatability layer has a useful 32-bit implementation. + */ +#define ENTRY_SAME(_name_) .dword sys_##_name_ +#define ENTRY_DIFF(_name_) .dword sys32_##_name_ +#define ENTRY_UHOH(_name_) .dword sys32_##unimplemented +#define ENTRY_OURS(_name_) .dword parisc_##_name_ +#define ENTRY_COMP(_name_) .dword compat_sys_##_name_ +#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT) +#define ENTRY_SAME(_name_) .dword sys_##_name_ +#define ENTRY_DIFF(_name_) .dword sys_##_name_ +#define ENTRY_UHOH(_name_) .dword sys_##_name_ +#define ENTRY_OURS(_name_) .dword sys_##_name_ +#define ENTRY_COMP(_name_) .dword sys_##_name_ +#else +#define ENTRY_SAME(_name_) .word sys_##_name_ +#define ENTRY_DIFF(_name_) .word sys_##_name_ +#define ENTRY_UHOH(_name_) .word sys_##_name_ +#define ENTRY_OURS(_name_) .word parisc_##_name_ +#define ENTRY_COMP(_name_) .word sys_##_name_ +#endif + + ENTRY_SAME(restart_syscall) /* 0 */ + ENTRY_SAME(exit) + ENTRY_SAME(fork_wrapper) + ENTRY_SAME(read) + ENTRY_SAME(write) + ENTRY_SAME(open) /* 5 */ + ENTRY_SAME(close) + ENTRY_SAME(waitpid) + ENTRY_SAME(creat) + ENTRY_SAME(link) + ENTRY_SAME(unlink) /* 10 */ + ENTRY_DIFF(execve_wrapper) + ENTRY_SAME(chdir) + /* See comments in kernel/time.c!!! Maybe we don't need this? */ + ENTRY_COMP(time) + ENTRY_SAME(mknod) + ENTRY_SAME(chmod) /* 15 */ + ENTRY_SAME(lchown) + ENTRY_SAME(socket) + /* struct stat is MAYBE identical wide and narrow ?? */ + ENTRY_COMP(newstat) + ENTRY_DIFF(lseek) + ENTRY_SAME(getpid) /* 20 */ + /* the 'void * data' parameter may need re-packing in wide */ + ENTRY_COMP(mount) + /* concerned about struct sockaddr in wide/narrow */ + /* ---> I think sockaddr is OK unless the compiler packs the struct */ + /* differently to align the char array */ + ENTRY_SAME(bind) + ENTRY_SAME(setuid) + ENTRY_SAME(getuid) + ENTRY_COMP(stime) /* 25 */ + ENTRY_SAME(ptrace) + ENTRY_SAME(alarm) + /* see stat comment */ + ENTRY_COMP(newfstat) + ENTRY_SAME(pause) + /* struct utimbuf uses time_t which might vary */ + ENTRY_COMP(utime) /* 30 */ + /* struct sockaddr... */ + ENTRY_SAME(connect) + ENTRY_SAME(listen) + ENTRY_SAME(access) + ENTRY_SAME(nice) + /* struct sockaddr... */ + ENTRY_SAME(accept) /* 35 */ + ENTRY_SAME(sync) + ENTRY_SAME(kill) + ENTRY_SAME(rename) + ENTRY_SAME(mkdir) + ENTRY_SAME(rmdir) /* 40 */ + ENTRY_SAME(dup) + ENTRY_SAME(pipe) + ENTRY_COMP(times) + /* struct sockaddr... */ + ENTRY_SAME(getsockname) + /* it seems possible brk() could return a >4G pointer... */ + ENTRY_SAME(brk) /* 45 */ + ENTRY_SAME(setgid) + ENTRY_SAME(getgid) + ENTRY_SAME(signal) + ENTRY_SAME(geteuid) + ENTRY_SAME(getegid) /* 50 */ + ENTRY_SAME(acct) + ENTRY_SAME(umount) + /* struct sockaddr... */ + ENTRY_SAME(getpeername) + ENTRY_COMP(ioctl) + ENTRY_COMP(fcntl) /* 55 */ + ENTRY_SAME(socketpair) + ENTRY_SAME(setpgid) + ENTRY_SAME(send) + ENTRY_SAME(newuname) + ENTRY_SAME(umask) /* 60 */ + ENTRY_SAME(chroot) + ENTRY_SAME(ustat) + ENTRY_SAME(dup2) + ENTRY_SAME(getppid) + ENTRY_SAME(getpgrp) /* 65 */ + ENTRY_SAME(setsid) + ENTRY_SAME(pivot_root) + /* I don't like this */ + ENTRY_UHOH(sgetmask) + ENTRY_UHOH(ssetmask) + ENTRY_SAME(setreuid) /* 70 */ + ENTRY_SAME(setregid) + ENTRY_SAME(mincore) + ENTRY_COMP(sigpending) + ENTRY_SAME(sethostname) + /* Following 3 have linux-common-code structs containing longs -( */ + ENTRY_COMP(setrlimit) /* 75 */ + ENTRY_COMP(getrlimit) + ENTRY_COMP(getrusage) + /* struct timeval and timezone are maybe?? consistent wide and narrow */ + ENTRY_DIFF(gettimeofday) + ENTRY_DIFF(settimeofday) + ENTRY_SAME(getgroups) /* 80 */ + ENTRY_SAME(setgroups) + /* struct socketaddr... */ + ENTRY_SAME(sendto) + ENTRY_SAME(symlink) + /* see stat comment */ + ENTRY_COMP(newlstat) + ENTRY_SAME(readlink) /* 85 */ + ENTRY_SAME(ni_syscall) /* was uselib */ + ENTRY_SAME(swapon) + ENTRY_SAME(reboot) + ENTRY_SAME(mmap2) + ENTRY_SAME(mmap) /* 90 */ + ENTRY_SAME(munmap) + ENTRY_SAME(truncate) + ENTRY_SAME(ftruncate) + ENTRY_SAME(fchmod) + ENTRY_SAME(fchown) /* 95 */ + ENTRY_SAME(getpriority) + ENTRY_SAME(setpriority) + ENTRY_SAME(recv) + ENTRY_COMP(statfs) + ENTRY_COMP(fstatfs) /* 100 */ + ENTRY_SAME(stat64) + ENTRY_SAME(ni_syscall) /* was socketcall */ + ENTRY_SAME(syslog) + /* even though manpage says struct timeval contains longs, ours has + * time_t and suseconds_t -- both of which are safe wide/narrow */ + ENTRY_COMP(setitimer) + ENTRY_COMP(getitimer) /* 105 */ + ENTRY_SAME(capget) + ENTRY_SAME(capset) + ENTRY_OURS(pread64) + ENTRY_OURS(pwrite64) + ENTRY_SAME(getcwd) /* 110 */ + ENTRY_SAME(vhangup) + ENTRY_SAME(fstat64) + ENTRY_SAME(vfork_wrapper) + /* struct rusage contains longs... */ + ENTRY_COMP(wait4) + ENTRY_SAME(swapoff) /* 115 */ + ENTRY_DIFF(sysinfo) + ENTRY_SAME(shutdown) + ENTRY_SAME(fsync) + ENTRY_SAME(madvise) + ENTRY_SAME(clone_wrapper) /* 120 */ + ENTRY_SAME(setdomainname) + ENTRY_DIFF(sendfile) + /* struct sockaddr... */ + ENTRY_SAME(recvfrom) + /* struct timex contains longs */ + ENTRY_DIFF(adjtimex) + ENTRY_SAME(mprotect) /* 125 */ + /* old_sigset_t forced to 32 bits. Beware glibc sigset_t */ + ENTRY_COMP(sigprocmask) + ENTRY_SAME(ni_syscall) /* create_module */ + ENTRY_SAME(init_module) + ENTRY_SAME(delete_module) + ENTRY_SAME(ni_syscall) /* 130: get_kernel_syms */ + /* time_t inside struct dqblk */ + ENTRY_SAME(quotactl) + ENTRY_SAME(getpgid) + ENTRY_SAME(fchdir) + ENTRY_SAME(bdflush) + ENTRY_SAME(sysfs) /* 135 */ + ENTRY_SAME(personality) + ENTRY_SAME(ni_syscall) /* for afs_syscall */ + ENTRY_SAME(setfsuid) + ENTRY_SAME(setfsgid) + /* I think this might work */ + ENTRY_SAME(llseek) /* 140 */ + /* struct linux_dirent has longs, like 'unsigned long d_ino' which + * almost definitely should be 'ino_t d_ino' but it's too late now */ + ENTRY_DIFF(getdents) + /* it is POSSIBLE that select will be OK because even though fd_set + * contains longs, the macros and sizes are clever. */ + ENTRY_COMP(select) + ENTRY_SAME(flock) + ENTRY_SAME(msync) + /* struct iovec contains pointers */ + ENTRY_COMP(readv) /* 145 */ + ENTRY_COMP(writev) + ENTRY_SAME(getsid) + ENTRY_SAME(fdatasync) + /* struct __sysctl_args is a mess */ + ENTRY_DIFF(sysctl) + ENTRY_SAME(mlock) /* 150 */ + ENTRY_SAME(munlock) + ENTRY_SAME(mlockall) + ENTRY_SAME(munlockall) + /* struct sched_param is ok for now */ + ENTRY_SAME(sched_setparam) + ENTRY_SAME(sched_getparam) /* 155 */ + ENTRY_SAME(sched_setscheduler) + ENTRY_SAME(sched_getscheduler) + ENTRY_SAME(sched_yield) + ENTRY_SAME(sched_get_priority_max) + ENTRY_SAME(sched_get_priority_min) /* 160 */ + /* These 2 would've worked if someone had defined struct timespec + * carefully, like timeval for example (which is about the same). + * Unfortunately it contains a long :-( */ + ENTRY_DIFF(sched_rr_get_interval) + ENTRY_COMP(nanosleep) + ENTRY_SAME(mremap) + ENTRY_SAME(setresuid) + ENTRY_SAME(getresuid) /* 165 */ + ENTRY_DIFF(sigaltstack_wrapper) + ENTRY_SAME(ni_syscall) /* query_module */ + ENTRY_SAME(poll) + /* structs contain pointers and an in_addr... */ + ENTRY_COMP(nfsservctl) + ENTRY_SAME(setresgid) /* 170 */ + ENTRY_SAME(getresgid) + ENTRY_SAME(prctl) + /* signals need a careful review */ + ENTRY_SAME(rt_sigreturn_wrapper) + ENTRY_DIFF(rt_sigaction) + ENTRY_DIFF(rt_sigprocmask) /* 175 */ + ENTRY_DIFF(rt_sigpending) + ENTRY_COMP(rt_sigtimedwait) + /* even though the struct siginfo_t is different, it appears like + * all the paths use values which should be same wide and narrow. + * Also the struct is padded to 128 bytes which means we don't have + * to worry about faulting trying to copy in a larger 64-bit + * struct from a 32-bit user-space app. + */ + ENTRY_SAME(rt_sigqueueinfo) + ENTRY_SAME(rt_sigsuspend_wrapper) /* not really SAME -- see the code */ + ENTRY_SAME(chown) /* 180 */ + /* setsockopt() used by iptables: SO_SET_REPLACE/SO_SET_ADD_COUNTERS */ + ENTRY_COMP(setsockopt) + ENTRY_SAME(getsockopt) + ENTRY_COMP(sendmsg) + ENTRY_COMP(recvmsg) + ENTRY_SAME(semop) /* 185 */ + ENTRY_SAME(semget) + ENTRY_DIFF(semctl) + ENTRY_DIFF(msgsnd) + ENTRY_DIFF(msgrcv) + ENTRY_SAME(msgget) /* 190 */ + ENTRY_SAME(msgctl) + ENTRY_SAME(shmat_wrapper) + ENTRY_SAME(shmdt) + ENTRY_SAME(shmget) + ENTRY_SAME(shmctl) /* 195 */ + ENTRY_SAME(ni_syscall) /* streams1 */ + ENTRY_SAME(ni_syscall) /* streams2 */ + ENTRY_SAME(lstat64) + ENTRY_OURS(truncate64) + ENTRY_OURS(ftruncate64) /* 200 */ + ENTRY_SAME(getdents64) + ENTRY_COMP(fcntl64) + ENTRY_SAME(ni_syscall) /* attrctl -- dead */ + ENTRY_SAME(ni_syscall) /* acl_get -- dead */ + ENTRY_SAME(ni_syscall) /* 205 (acl_set -- dead) */ + ENTRY_SAME(gettid) + ENTRY_OURS(readahead) + ENTRY_SAME(tkill) + ENTRY_SAME(sendfile64) + ENTRY_COMP(futex) /* 210 */ + ENTRY_COMP(sched_setaffinity) + ENTRY_COMP(sched_getaffinity) + ENTRY_SAME(ni_syscall) /* set_thread_area */ + ENTRY_SAME(ni_syscall) /* get_thread_area */ + ENTRY_SAME(io_setup) /* 215 */ + ENTRY_SAME(io_destroy) + ENTRY_SAME(io_getevents) + ENTRY_SAME(io_submit) + ENTRY_SAME(io_cancel) + ENTRY_SAME(alloc_hugepages) /* 220 */ + ENTRY_SAME(free_hugepages) + ENTRY_SAME(exit_group) + ENTRY_DIFF(lookup_dcookie) + ENTRY_SAME(epoll_create) + ENTRY_SAME(epoll_ctl) /* 225 */ + ENTRY_SAME(epoll_wait) + ENTRY_SAME(remap_file_pages) + ENTRY_SAME(semtimedop) + ENTRY_SAME(mq_open) + ENTRY_SAME(mq_unlink) /* 230 */ + ENTRY_SAME(mq_timedsend) + ENTRY_SAME(mq_timedreceive) + ENTRY_SAME(mq_notify) + ENTRY_SAME(mq_getsetattr) + ENTRY_COMP(waitid) /* 235 */ + ENTRY_OURS(fadvise64_64) + ENTRY_SAME(set_tid_address) + ENTRY_SAME(setxattr) + ENTRY_SAME(lsetxattr) + ENTRY_SAME(fsetxattr) /* 240 */ + ENTRY_SAME(getxattr) + ENTRY_SAME(lgetxattr) + ENTRY_SAME(fgetxattr) + ENTRY_SAME(listxattr) + ENTRY_SAME(llistxattr) /* 245 */ + ENTRY_SAME(flistxattr) + ENTRY_SAME(removexattr) + ENTRY_SAME(lremovexattr) + ENTRY_SAME(fremovexattr) + ENTRY_COMP(timer_create) /* 250 */ + ENTRY_COMP(timer_settime) + ENTRY_COMP(timer_gettime) + ENTRY_SAME(timer_getoverrun) + ENTRY_SAME(timer_delete) + ENTRY_COMP(clock_settime) /* 255 */ + ENTRY_COMP(clock_gettime) + ENTRY_COMP(clock_getres) + ENTRY_COMP(clock_nanosleep) + ENTRY_SAME(tgkill) + ENTRY_COMP(mbind) /* 260 */ + ENTRY_COMP(get_mempolicy) + ENTRY_COMP(set_mempolicy) + /* Nothing yet */ + diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c new file mode 100644 index 000000000000..6cf7407344ba --- /dev/null +++ b/arch/parisc/kernel/time.c @@ -0,0 +1,243 @@ +/* + * linux/arch/parisc/kernel/time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * Modifications for ARM (C) 1994, 1995, 1996,1997 Russell King + * Copyright (C) 1999 SuSE GmbH, (Philipp Rumpf, prumpf@tux.org) + * + * 1994-07-02 Alan Modra + * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime + * 1998-12-20 Updated NTP code according to technical memorandum Jan '96 + * "A Kernel Model for Precision Timekeeping" by Dave Mills + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +u64 jiffies_64 = INITIAL_JIFFIES; + +EXPORT_SYMBOL(jiffies_64); + +/* xtime and wall_jiffies keep wall-clock time */ +extern unsigned long wall_jiffies; + +static long clocktick; /* timer cycles per tick */ +static long halftick; + +#ifdef CONFIG_SMP +extern void smp_do_timer(struct pt_regs *regs); +#endif + +irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + long now; + long next_tick; + int nticks; + int cpu = smp_processor_id(); + + profile_tick(CPU_PROFILING, regs); + + now = mfctl(16); + /* initialize next_tick to time at last clocktick */ + next_tick = cpu_data[cpu].it_value; + + /* since time passes between the interrupt and the mfctl() + * above, it is never true that last_tick + clocktick == now. If we + * never miss a clocktick, we could set next_tick = last_tick + clocktick + * but maybe we'll miss ticks, hence the loop. + * + * Variables are *signed*. + */ + + nticks = 0; + while((next_tick - now) < halftick) { + next_tick += clocktick; + nticks++; + } + mtctl(next_tick, 16); + cpu_data[cpu].it_value = next_tick; + + while (nticks--) { +#ifdef CONFIG_SMP + smp_do_timer(regs); +#else + update_process_times(user_mode(regs)); +#endif + if (cpu == 0) { + write_seqlock(&xtime_lock); + do_timer(regs); + write_sequnlock(&xtime_lock); + } + } + +#ifdef CONFIG_CHASSIS_LCD_LED + /* Only schedule the led tasklet on cpu 0, and only if it + * is enabled. + */ + if (cpu == 0 && !atomic_read(&led_tasklet.count)) + tasklet_schedule(&led_tasklet); +#endif + + /* check soft power switch status */ + if (cpu == 0 && !atomic_read(&power_tasklet.count)) + tasklet_schedule(&power_tasklet); + + return IRQ_HANDLED; +} + +/*** converted from ia64 ***/ +/* + * Return the number of micro-seconds that elapsed since the last + * update to wall time (aka xtime aka wall_jiffies). The xtime_lock + * must be at least read-locked when calling this routine. + */ +static inline unsigned long +gettimeoffset (void) +{ +#ifndef CONFIG_SMP + /* + * FIXME: This won't work on smp because jiffies are updated by cpu 0. + * Once parisc-linux learns the cr16 difference between processors, + * this could be made to work. + */ + long last_tick; + long elapsed_cycles; + + /* it_value is the intended time of the next tick */ + last_tick = cpu_data[smp_processor_id()].it_value; + + /* Subtract one tick and account for possible difference between + * when we expected the tick and when it actually arrived. + * (aka wall vs real) + */ + last_tick -= clocktick * (jiffies - wall_jiffies + 1); + elapsed_cycles = mfctl(16) - last_tick; + + /* the precision of this math could be improved */ + return elapsed_cycles / (PAGE0->mem_10msec / 10000); +#else + return 0; +#endif +} + +void +do_gettimeofday (struct timeval *tv) +{ + unsigned long flags, seq, usec, sec; + + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + usec = gettimeoffset(); + sec = xtime.tv_sec; + usec += (xtime.tv_nsec / 1000); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + + while (usec >= 1000000) { + usec -= 1000000; + ++sec; + } + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +EXPORT_SYMBOL(do_gettimeofday); + +int +do_settimeofday (struct timespec *tv) +{ + time_t wtm_sec, sec = tv->tv_sec; + long wtm_nsec, nsec = tv->tv_nsec; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irq(&xtime_lock); + { + /* + * This is revolting. We need to set "xtime" + * correctly. However, the value in this location is + * the value at the most recent update of wall time. + * Discover what correction gettimeofday would have + * done, and then undo it! + */ + nsec -= gettimeoffset() * 1000; + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); + + set_normalized_timespec(&xtime, sec, nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + } + write_sequnlock_irq(&xtime_lock); + clock_was_set(); + return 0; +} +EXPORT_SYMBOL(do_settimeofday); + +/* + * XXX: We can do better than this. + * Returns nanoseconds + */ + +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ); +} + + +void __init time_init(void) +{ + unsigned long next_tick; + static struct pdc_tod tod_data; + + clocktick = (100 * PAGE0->mem_10msec) / HZ; + halftick = clocktick / 2; + + /* Setup clock interrupt timing */ + + next_tick = mfctl(16); + next_tick += clocktick; + cpu_data[smp_processor_id()].it_value = next_tick; + + /* kick off Itimer (CR16) */ + mtctl(next_tick, 16); + + if(pdc_tod_read(&tod_data) == 0) { + write_seqlock_irq(&xtime_lock); + xtime.tv_sec = tod_data.tod_sec; + xtime.tv_nsec = tod_data.tod_usec * 1000; + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + write_sequnlock_irq(&xtime_lock); + } else { + printk(KERN_ERR "Error reading tod clock\n"); + xtime.tv_sec = 0; + xtime.tv_nsec = 0; + } +} + diff --git a/arch/parisc/kernel/topology.c b/arch/parisc/kernel/topology.c new file mode 100644 index 000000000000..ac2a40681414 --- /dev/null +++ b/arch/parisc/kernel/topology.c @@ -0,0 +1,37 @@ +/* + * arch/parisc/kernel/topology.c - Populate driverfs with topology information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +static struct cpu cpu_devices[NR_CPUS]; + +static int __init topology_init(void) +{ + struct node *parent = NULL; + int num; + + for_each_present_cpu(num) { + register_cpu(&cpu_devices[num], num, parent); + } + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c new file mode 100644 index 000000000000..d2e5b229a2f4 --- /dev/null +++ b/arch/parisc/kernel/traps.c @@ -0,0 +1,834 @@ +/* + * linux/arch/parisc/traps.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1999, 2000 Philipp Rumpf + */ + +/* + * 'Traps.c' handles hardware traps and faults after we have saved some + * state in 'asm.s'. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../math-emu/math-emu.h" /* for handle_fpe() */ + +#define PRINT_USER_FAULTS /* (turn this on if you want user faults to be */ + /* dumped to the console via printk) */ + +#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) +DEFINE_SPINLOCK(pa_dbit_lock); +#endif + +int printbinary(char *buf, unsigned long x, int nbits) +{ + unsigned long mask = 1UL << (nbits - 1); + while (mask != 0) { + *buf++ = (mask & x ? '1' : '0'); + mask >>= 1; + } + *buf = '\0'; + + return nbits; +} + +#ifdef __LP64__ +#define RFMT "%016lx" +#else +#define RFMT "%08lx" +#endif + +void show_regs(struct pt_regs *regs) +{ + int i; + char buf[128], *p; + char *level; + unsigned long cr30; + unsigned long cr31; + + level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; + + printk("%s\n", level); /* don't want to have that pretty register dump messed up */ + + printk("%s YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI\n", level); + printbinary(buf, regs->gr[0], 32); + printk("%sPSW: %s %s\n", level, buf, print_tainted()); + + for (i = 0; i < 32; i += 4) { + int j; + p = buf; + p += sprintf(p, "%sr%02d-%02d ", level, i, i + 3); + for (j = 0; j < 4; j++) { + p += sprintf(p, " " RFMT, (i+j) == 0 ? 0 : regs->gr[i + j]); + } + printk("%s\n", buf); + } + + for (i = 0; i < 8; i += 4) { + int j; + p = buf; + p += sprintf(p, "%ssr%d-%d ", level, i, i + 3); + for (j = 0; j < 4; j++) { + p += sprintf(p, " " RFMT, regs->sr[i + j]); + } + printk("%s\n", buf); + } + +#if RIDICULOUSLY_VERBOSE + for (i = 0; i < 32; i += 2) + printk("%sFR%02d : %016lx FR%2d : %016lx", level, i, + regs->fr[i], i+1, regs->fr[i+1]); +#endif + + cr30 = mfctl(30); + cr31 = mfctl(31); + printk("%s\n", level); + printk("%sIASQ: " RFMT " " RFMT " IAOQ: " RFMT " " RFMT "\n", + level, regs->iasq[0], regs->iasq[1], regs->iaoq[0], regs->iaoq[1]); + printk("%s IIR: %08lx ISR: " RFMT " IOR: " RFMT "\n", + level, regs->iir, regs->isr, regs->ior); + printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n", + level, current_thread_info()->cpu, cr30, cr31); + printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28); + printk(level); + print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]); + printk(level); + print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]); + printk(level); + print_symbol(" RP(r2): %s\n", regs->gr[2]); +} + + +void dump_stack(void) +{ + show_stack(NULL, NULL); +} + +EXPORT_SYMBOL(dump_stack); + +static void do_show_stack(struct unwind_frame_info *info) +{ + int i = 1; + + printk("Backtrace:\n"); + while (i <= 16) { + if (unwind_once(info) < 0 || info->ip == 0) + break; + + if (__kernel_text_address(info->ip)) { + printk(" [<" RFMT ">] ", info->ip); +#ifdef CONFIG_KALLSYMS + print_symbol("%s\n", info->ip); +#else + if ((i & 0x03) == 0) + printk("\n"); +#endif + i++; + } + } + printk("\n"); +} + +void show_stack(struct task_struct *task, unsigned long *s) +{ + struct unwind_frame_info info; + + if (!task) { + unsigned long sp; + struct pt_regs *r; + +HERE: + asm volatile ("copy %%r30, %0" : "=r"(sp)); + r = (struct pt_regs *)kmalloc(sizeof(struct pt_regs), GFP_KERNEL); + if (!r) + return; + memset(r, 0, sizeof(struct pt_regs)); + r->iaoq[0] = (unsigned long)&&HERE; + r->gr[2] = (unsigned long)__builtin_return_address(0); + r->gr[30] = sp; + unwind_frame_init(&info, current, r); + kfree(r); + } else { + unwind_frame_init_from_blocked_task(&info, task); + } + + do_show_stack(&info); +} + +void die_if_kernel(char *str, struct pt_regs *regs, long err) +{ + if (user_mode(regs)) { + if (err == 0) + return; /* STFU */ + + printk(KERN_CRIT "%s (pid %d): %s (code %ld) at " RFMT "\n", + current->comm, current->pid, str, err, regs->iaoq[0]); +#ifdef PRINT_USER_FAULTS + /* XXX for debugging only */ + show_regs(regs); +#endif + return; + } + + oops_in_progress = 1; + + /* Amuse the user in a SPARC fashion */ + printk( +" _______________________________ \n" +" < Your System ate a SPARC! Gah! >\n" +" ------------------------------- \n" +" \\ ^__^\n" +" \\ (xx)\\_______\n" +" (__)\\ )\\/\\\n" +" U ||----w |\n" +" || ||\n"); + + /* unlock the pdc lock if necessary */ + pdc_emergency_unlock(); + + /* maybe the kernel hasn't booted very far yet and hasn't been able + * to initialize the serial or STI console. In that case we should + * re-enable the pdc console, so that the user will be able to + * identify the problem. */ + if (!console_drivers) + pdc_console_restart(); + + printk(KERN_CRIT "%s (pid %d): %s (code %ld)\n", + current->comm, current->pid, str, err); + show_regs(regs); + + /* Wot's wrong wif bein' racy? */ + if (current->thread.flags & PARISC_KERNEL_DEATH) { + printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__); + local_irq_enable(); + while (1); + } + + current->thread.flags |= PARISC_KERNEL_DEATH; + do_exit(SIGSEGV); +} + +int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs) +{ + return syscall(regs); +} + +/* gdb uses break 4,8 */ +#define GDB_BREAK_INSN 0x10004 +void handle_gdb_break(struct pt_regs *regs, int wot) +{ + struct siginfo si; + + si.si_code = wot; + si.si_addr = (void __user *) (regs->iaoq[0] & ~3); + si.si_signo = SIGTRAP; + si.si_errno = 0; + force_sig_info(SIGTRAP, &si, current); +} + +void handle_break(unsigned iir, struct pt_regs *regs) +{ + struct siginfo si; + + switch(iir) { + case 0x00: +#ifdef PRINT_USER_FAULTS + printk(KERN_DEBUG "break 0,0: pid=%d command='%s'\n", + current->pid, current->comm); +#endif + die_if_kernel("Breakpoint", regs, 0); +#ifdef PRINT_USER_FAULTS + show_regs(regs); +#endif + si.si_code = TRAP_BRKPT; + si.si_addr = (void __user *) (regs->iaoq[0] & ~3); + si.si_signo = SIGTRAP; + force_sig_info(SIGTRAP, &si, current); + break; + + case GDB_BREAK_INSN: + die_if_kernel("Breakpoint", regs, 0); + handle_gdb_break(regs, TRAP_BRKPT); + break; + + default: +#ifdef PRINT_USER_FAULTS + printk(KERN_DEBUG "break %#08x: pid=%d command='%s'\n", + iir, current->pid, current->comm); + show_regs(regs); +#endif + si.si_signo = SIGTRAP; + si.si_code = TRAP_BRKPT; + si.si_addr = (void __user *) (regs->iaoq[0] & ~3); + force_sig_info(SIGTRAP, &si, current); + return; + } +} + + +int handle_toc(void) +{ + printk(KERN_CRIT "TOC call.\n"); + return 0; +} + +static void default_trap(int code, struct pt_regs *regs) +{ + printk(KERN_ERR "Trap %d on CPU %d\n", code, smp_processor_id()); + show_regs(regs); +} + +void (*cpu_lpmc) (int code, struct pt_regs *regs) = default_trap; + + +void transfer_pim_to_trap_frame(struct pt_regs *regs) +{ + register int i; + extern unsigned int hpmc_pim_data[]; + struct pdc_hpmc_pim_11 *pim_narrow; + struct pdc_hpmc_pim_20 *pim_wide; + + if (boot_cpu_data.cpu_type >= pcxu) { + + pim_wide = (struct pdc_hpmc_pim_20 *)hpmc_pim_data; + + /* + * Note: The following code will probably generate a + * bunch of truncation error warnings from the compiler. + * Could be handled with an ifdef, but perhaps there + * is a better way. + */ + + regs->gr[0] = pim_wide->cr[22]; + + for (i = 1; i < 32; i++) + regs->gr[i] = pim_wide->gr[i]; + + for (i = 0; i < 32; i++) + regs->fr[i] = pim_wide->fr[i]; + + for (i = 0; i < 8; i++) + regs->sr[i] = pim_wide->sr[i]; + + regs->iasq[0] = pim_wide->cr[17]; + regs->iasq[1] = pim_wide->iasq_back; + regs->iaoq[0] = pim_wide->cr[18]; + regs->iaoq[1] = pim_wide->iaoq_back; + + regs->sar = pim_wide->cr[11]; + regs->iir = pim_wide->cr[19]; + regs->isr = pim_wide->cr[20]; + regs->ior = pim_wide->cr[21]; + } + else { + pim_narrow = (struct pdc_hpmc_pim_11 *)hpmc_pim_data; + + regs->gr[0] = pim_narrow->cr[22]; + + for (i = 1; i < 32; i++) + regs->gr[i] = pim_narrow->gr[i]; + + for (i = 0; i < 32; i++) + regs->fr[i] = pim_narrow->fr[i]; + + for (i = 0; i < 8; i++) + regs->sr[i] = pim_narrow->sr[i]; + + regs->iasq[0] = pim_narrow->cr[17]; + regs->iasq[1] = pim_narrow->iasq_back; + regs->iaoq[0] = pim_narrow->cr[18]; + regs->iaoq[1] = pim_narrow->iaoq_back; + + regs->sar = pim_narrow->cr[11]; + regs->iir = pim_narrow->cr[19]; + regs->isr = pim_narrow->cr[20]; + regs->ior = pim_narrow->cr[21]; + } + + /* + * The following fields only have meaning if we came through + * another path. So just zero them here. + */ + + regs->ksp = 0; + regs->kpc = 0; + regs->orig_r28 = 0; +} + + +/* + * This routine is called as a last resort when everything else + * has gone clearly wrong. We get called for faults in kernel space, + * and HPMC's. + */ +void parisc_terminate(char *msg, struct pt_regs *regs, int code, unsigned long offset) +{ + static DEFINE_SPINLOCK(terminate_lock); + + oops_in_progress = 1; + + set_eiem(0); + local_irq_disable(); + spin_lock(&terminate_lock); + + /* unlock the pdc lock if necessary */ + pdc_emergency_unlock(); + + /* restart pdc console if necessary */ + if (!console_drivers) + pdc_console_restart(); + + /* Not all paths will gutter the processor... */ + switch(code){ + + case 1: + transfer_pim_to_trap_frame(regs); + break; + + default: + /* Fall through */ + break; + + } + + { + /* show_stack(NULL, (unsigned long *)regs->gr[30]); */ + struct unwind_frame_info info; + unwind_frame_init(&info, current, regs); + do_show_stack(&info); + } + + printk("\n"); + printk(KERN_CRIT "%s: Code=%d regs=%p (Addr=" RFMT ")\n", + msg, code, regs, offset); + show_regs(regs); + + spin_unlock(&terminate_lock); + + /* put soft power button back under hardware control; + * if the user had pressed it once at any time, the + * system will shut down immediately right here. */ + pdc_soft_power_button(0); + + /* Call kernel panic() so reboot timeouts work properly + * FIXME: This function should be on the list of + * panic notifiers, and we should call panic + * directly from the location that we wish. + * e.g. We should not call panic from + * parisc_terminate, but rather the oter way around. + * This hack works, prints the panic message twice, + * and it enables reboot timers! + */ + panic(msg); +} + +void handle_interruption(int code, struct pt_regs *regs) +{ + unsigned long fault_address = 0; + unsigned long fault_space = 0; + struct siginfo si; + + if (code == 1) + pdc_console_restart(); /* switch back to pdc if HPMC */ + else + local_irq_enable(); + + /* Security check: + * If the priority level is still user, and the + * faulting space is not equal to the active space + * then the user is attempting something in a space + * that does not belong to them. Kill the process. + * + * This is normally the situation when the user + * attempts to jump into the kernel space at the + * wrong offset, be it at the gateway page or a + * random location. + * + * We cannot normally signal the process because it + * could *be* on the gateway page, and processes + * executing on the gateway page can't have signals + * delivered. + * + * We merely readjust the address into the users + * space, at a destination address of zero, and + * allow processing to continue. + */ + if (((unsigned long)regs->iaoq[0] & 3) && + ((unsigned long)regs->iasq[0] != (unsigned long)regs->sr[7])) { + /* Kill the user process later */ + regs->iaoq[0] = 0 | 3; + regs->iaoq[1] = regs->iaoq[0] + 4; + regs->iasq[0] = regs->iasq[0] = regs->sr[7]; + regs->gr[0] &= ~PSW_B; + return; + } + +#if 0 + printk(KERN_CRIT "Interruption # %d\n", code); +#endif + + switch(code) { + + case 1: + /* High-priority machine check (HPMC) */ + + /* set up a new led state on systems shipped with a LED State panel */ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_HPMC); + + parisc_terminate("High Priority Machine Check (HPMC)", + regs, code, 0); + /* NOT REACHED */ + + case 2: + /* Power failure interrupt */ + printk(KERN_CRIT "Power failure interrupt !\n"); + return; + + case 3: + /* Recovery counter trap */ + regs->gr[0] &= ~PSW_R; + if (user_space(regs)) + handle_gdb_break(regs, TRAP_TRACE); + /* else this must be the start of a syscall - just let it run */ + return; + + case 5: + /* Low-priority machine check */ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_LPMC); + + flush_all_caches(); + cpu_lpmc(5, regs); + return; + + case 6: + /* Instruction TLB miss fault/Instruction page fault */ + fault_address = regs->iaoq[0]; + fault_space = regs->iasq[0]; + break; + + case 8: + /* Illegal instruction trap */ + die_if_kernel("Illegal instruction", regs, code); + si.si_code = ILL_ILLOPC; + goto give_sigill; + + case 9: + /* Break instruction trap */ + handle_break(regs->iir,regs); + return; + + case 10: + /* Privileged operation trap */ + die_if_kernel("Privileged operation", regs, code); + si.si_code = ILL_PRVOPC; + goto give_sigill; + + case 11: + /* Privileged register trap */ + if ((regs->iir & 0xffdfffe0) == 0x034008a0) { + + /* This is a MFCTL cr26/cr27 to gr instruction. + * PCXS traps on this, so we need to emulate it. + */ + + if (regs->iir & 0x00200000) + regs->gr[regs->iir & 0x1f] = mfctl(27); + else + regs->gr[regs->iir & 0x1f] = mfctl(26); + + regs->iaoq[0] = regs->iaoq[1]; + regs->iaoq[1] += 4; + regs->iasq[0] = regs->iasq[1]; + return; + } + + die_if_kernel("Privileged register usage", regs, code); + si.si_code = ILL_PRVREG; + give_sigill: + si.si_signo = SIGILL; + si.si_errno = 0; + si.si_addr = (void __user *) regs->iaoq[0]; + force_sig_info(SIGILL, &si, current); + return; + + case 12: + /* Overflow Trap, let the userland signal handler do the cleanup */ + si.si_signo = SIGFPE; + si.si_code = FPE_INTOVF; + si.si_addr = (void __user *) regs->iaoq[0]; + force_sig_info(SIGFPE, &si, current); + return; + + case 13: + /* Conditional Trap + The condition succees in an instruction which traps + on condition */ + if(user_mode(regs)){ + si.si_signo = SIGFPE; + /* Set to zero, and let the userspace app figure it out from + the insn pointed to by si_addr */ + si.si_code = 0; + si.si_addr = (void __user *) regs->iaoq[0]; + force_sig_info(SIGFPE, &si, current); + return; + } + /* The kernel doesn't want to handle condition codes */ + break; + + case 14: + /* Assist Exception Trap, i.e. floating point exception. */ + die_if_kernel("Floating point exception", regs, 0); /* quiet */ + handle_fpe(regs); + return; + + case 15: + /* Data TLB miss fault/Data page fault */ + /* Fall through */ + case 16: + /* Non-access instruction TLB miss fault */ + /* The instruction TLB entry needed for the target address of the FIC + is absent, and hardware can't find it, so we get to cleanup */ + /* Fall through */ + case 17: + /* Non-access data TLB miss fault/Non-access data page fault */ + /* FIXME: + Still need to add slow path emulation code here! + If the insn used a non-shadow register, then the tlb + handlers could not have their side-effect (e.g. probe + writing to a target register) emulated since rfir would + erase the changes to said register. Instead we have to + setup everything, call this function we are in, and emulate + by hand. Technically we need to emulate: + fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw + */ + fault_address = regs->ior; + fault_space = regs->isr; + break; + + case 18: + /* PCXS only -- later cpu's split this into types 26,27 & 28 */ + /* Check for unaligned access */ + if (check_unaligned(regs)) { + handle_unaligned(regs); + return; + } + /* Fall Through */ + case 26: + /* PCXL: Data memory access rights trap */ + fault_address = regs->ior; + fault_space = regs->isr; + break; + + case 19: + /* Data memory break trap */ + regs->gr[0] |= PSW_X; /* So we can single-step over the trap */ + /* fall thru */ + case 21: + /* Page reference trap */ + handle_gdb_break(regs, TRAP_HWBKPT); + return; + + case 25: + /* Taken branch trap */ + regs->gr[0] &= ~PSW_T; + if (user_space(regs)) + handle_gdb_break(regs, TRAP_BRANCH); + /* else this must be the start of a syscall - just let it + * run. + */ + return; + + case 7: + /* Instruction access rights */ + /* PCXL: Instruction memory protection trap */ + + /* + * This could be caused by either: 1) a process attempting + * to execute within a vma that does not have execute + * permission, or 2) an access rights violation caused by a + * flush only translation set up by ptep_get_and_clear(). + * So we check the vma permissions to differentiate the two. + * If the vma indicates we have execute permission, then + * the cause is the latter one. In this case, we need to + * call do_page_fault() to fix the problem. + */ + + if (user_mode(regs)) { + struct vm_area_struct *vma; + + down_read(¤t->mm->mmap_sem); + vma = find_vma(current->mm,regs->iaoq[0]); + if (vma && (regs->iaoq[0] >= vma->vm_start) + && (vma->vm_flags & VM_EXEC)) { + + fault_address = regs->iaoq[0]; + fault_space = regs->iasq[0]; + + up_read(¤t->mm->mmap_sem); + break; /* call do_page_fault() */ + } + up_read(¤t->mm->mmap_sem); + } + /* Fall Through */ + case 27: + /* Data memory protection ID trap */ + die_if_kernel("Protection id trap", regs, code); + si.si_code = SEGV_MAPERR; + si.si_signo = SIGSEGV; + si.si_errno = 0; + if (code == 7) + si.si_addr = (void __user *) regs->iaoq[0]; + else + si.si_addr = (void __user *) regs->ior; + force_sig_info(SIGSEGV, &si, current); + return; + + case 28: + /* Unaligned data reference trap */ + handle_unaligned(regs); + return; + + default: + if (user_mode(regs)) { +#ifdef PRINT_USER_FAULTS + printk(KERN_DEBUG "\nhandle_interruption() pid=%d command='%s'\n", + current->pid, current->comm); + show_regs(regs); +#endif + /* SIGBUS, for lack of a better one. */ + si.si_signo = SIGBUS; + si.si_code = BUS_OBJERR; + si.si_errno = 0; + si.si_addr = (void __user *) regs->ior; + force_sig_info(SIGBUS, &si, current); + return; + } + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC); + + parisc_terminate("Unexpected interruption", regs, code, 0); + /* NOT REACHED */ + } + + if (user_mode(regs)) { + if ((fault_space >> SPACEID_SHIFT) != (regs->sr[7] >> SPACEID_SHIFT)) { +#ifdef PRINT_USER_FAULTS + if (fault_space == 0) + printk(KERN_DEBUG "User Fault on Kernel Space "); + else + printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ", + code); + printk("pid=%d command='%s'\n", current->pid, current->comm); + show_regs(regs); +#endif + si.si_signo = SIGSEGV; + si.si_errno = 0; + si.si_code = SEGV_MAPERR; + si.si_addr = (void __user *) regs->ior; + force_sig_info(SIGSEGV, &si, current); + return; + } + } + else { + + /* + * The kernel should never fault on its own address space. + */ + + if (fault_space == 0) + { + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC); + parisc_terminate("Kernel Fault", regs, code, fault_address); + + } + } + + do_page_fault(regs, code, fault_address); +} + + +int __init check_ivt(void *iva) +{ + int i; + u32 check = 0; + u32 *ivap; + u32 *hpmcp; + u32 length; + extern void os_hpmc(void); + extern void os_hpmc_end(void); + + if (strcmp((char *)iva, "cows can fly")) + return -1; + + ivap = (u32 *)iva; + + for (i = 0; i < 8; i++) + *ivap++ = 0; + + /* Compute Checksum for HPMC handler */ + + length = (u32)((unsigned long)os_hpmc_end - (unsigned long)os_hpmc); + ivap[7] = length; + + hpmcp = (u32 *)os_hpmc; + + for (i=0; i= pcxu) + iva = (void *) &fault_vector_20; + else +#ifdef __LP64__ + panic("Can't boot 64-bit OS on PA1.1 processor!"); +#else + iva = (void *) &fault_vector_11; +#endif + + if (check_ivt(iva)) + panic("IVT invalid"); +} diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c new file mode 100644 index 000000000000..62eea35bcd69 --- /dev/null +++ b/arch/parisc/kernel/unaligned.c @@ -0,0 +1,816 @@ +/* + * Unaligned memory access handler + * + * Copyright (C) 2001 Randolph Chung + * Significantly tweaked by LaMont Jones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include + +/* #define DEBUG_UNALIGNED 1 */ + +#ifdef DEBUG_UNALIGNED +#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0) +#else +#define DPRINTF(fmt, args...) +#endif + +#ifdef __LP64__ +#define RFMT "%016lx" +#else +#define RFMT "%08lx" +#endif + +#define FIXUP_BRANCH(lbl) \ + "\tldil L%%" #lbl ", %%r1\n" \ + "\tldo R%%" #lbl "(%%r1), %%r1\n" \ + "\tbv,n %%r0(%%r1)\n" + +/* 1111 1100 0000 0000 0001 0011 1100 0000 */ +#define OPCODE1(a,b,c) ((a)<<26|(b)<<12|(c)<<6) +#define OPCODE2(a,b) ((a)<<26|(b)<<1) +#define OPCODE3(a,b) ((a)<<26|(b)<<2) +#define OPCODE4(a) ((a)<<26) +#define OPCODE1_MASK OPCODE1(0x3f,1,0xf) +#define OPCODE2_MASK OPCODE2(0x3f,1) +#define OPCODE3_MASK OPCODE3(0x3f,1) +#define OPCODE4_MASK OPCODE4(0x3f) + +/* skip LDB - never unaligned (index) */ +#define OPCODE_LDH_I OPCODE1(0x03,0,0x1) +#define OPCODE_LDW_I OPCODE1(0x03,0,0x2) +#define OPCODE_LDD_I OPCODE1(0x03,0,0x3) +#define OPCODE_LDDA_I OPCODE1(0x03,0,0x4) +#define OPCODE_LDCD_I OPCODE1(0x03,0,0x5) +#define OPCODE_LDWA_I OPCODE1(0x03,0,0x6) +#define OPCODE_LDCW_I OPCODE1(0x03,0,0x7) +/* skip LDB - never unaligned (short) */ +#define OPCODE_LDH_S OPCODE1(0x03,1,0x1) +#define OPCODE_LDW_S OPCODE1(0x03,1,0x2) +#define OPCODE_LDD_S OPCODE1(0x03,1,0x3) +#define OPCODE_LDDA_S OPCODE1(0x03,1,0x4) +#define OPCODE_LDCD_S OPCODE1(0x03,1,0x5) +#define OPCODE_LDWA_S OPCODE1(0x03,1,0x6) +#define OPCODE_LDCW_S OPCODE1(0x03,1,0x7) +/* skip STB - never unaligned */ +#define OPCODE_STH OPCODE1(0x03,1,0x9) +#define OPCODE_STW OPCODE1(0x03,1,0xa) +#define OPCODE_STD OPCODE1(0x03,1,0xb) +/* skip STBY - never unaligned */ +/* skip STDBY - never unaligned */ +#define OPCODE_STWA OPCODE1(0x03,1,0xe) +#define OPCODE_STDA OPCODE1(0x03,1,0xf) + +#define OPCODE_FLDWX OPCODE1(0x09,0,0x0) +#define OPCODE_FLDWXR OPCODE1(0x09,0,0x1) +#define OPCODE_FSTWX OPCODE1(0x09,0,0x8) +#define OPCODE_FSTWXR OPCODE1(0x09,0,0x9) +#define OPCODE_FLDWS OPCODE1(0x09,1,0x0) +#define OPCODE_FLDWSR OPCODE1(0x09,1,0x1) +#define OPCODE_FSTWS OPCODE1(0x09,1,0x8) +#define OPCODE_FSTWSR OPCODE1(0x09,1,0x9) +#define OPCODE_FLDDX OPCODE1(0x0b,0,0x0) +#define OPCODE_FSTDX OPCODE1(0x0b,0,0x8) +#define OPCODE_FLDDS OPCODE1(0x0b,1,0x0) +#define OPCODE_FSTDS OPCODE1(0x0b,1,0x8) + +#define OPCODE_LDD_L OPCODE2(0x14,0) +#define OPCODE_FLDD_L OPCODE2(0x14,1) +#define OPCODE_STD_L OPCODE2(0x1c,0) +#define OPCODE_FSTD_L OPCODE2(0x1c,1) + +#define OPCODE_LDW_M OPCODE3(0x17,1) +#define OPCODE_FLDW_L OPCODE3(0x17,0) +#define OPCODE_FSTW_L OPCODE3(0x1f,0) +#define OPCODE_STW_M OPCODE3(0x1f,1) + +#define OPCODE_LDH_L OPCODE4(0x11) +#define OPCODE_LDW_L OPCODE4(0x12) +#define OPCODE_LDWM OPCODE4(0x13) +#define OPCODE_STH_L OPCODE4(0x19) +#define OPCODE_STW_L OPCODE4(0x1A) +#define OPCODE_STWM OPCODE4(0x1B) + +#define MAJOR_OP(i) (((i)>>26)&0x3f) +#define R1(i) (((i)>>21)&0x1f) +#define R2(i) (((i)>>16)&0x1f) +#define R3(i) ((i)&0x1f) +#define FR3(i) ((((i)<<1)&0x1f)|(((i)>>6)&1)) +#define IM(i,n) (((i)>>1&((1<<(n-1))-1))|((i)&1?((0-1L)<<(n-1)):0)) +#define IM5_2(i) IM((i)>>16,5) +#define IM5_3(i) IM((i),5) +#define IM14(i) IM((i),14) + +#define ERR_NOTHANDLED -1 +#define ERR_PAGEFAULT -2 + +int unaligned_enabled = 1; + +void die_if_kernel (char *str, struct pt_regs *regs, long err); + +static int emulate_ldh(struct pt_regs *regs, int toreg) +{ + unsigned long saddr = regs->ior; + unsigned long val = 0; + int ret; + + DPRINTF("load " RFMT ":" RFMT " to r%d for 2 bytes\n", + regs->isr, regs->ior, toreg); + + __asm__ __volatile__ ( +" mtsp %4, %%sr1\n" +"1: ldbs 0(%%sr1,%3), %%r20\n" +"2: ldbs 1(%%sr1,%3), %0\n" +" depw %%r20, 23, 24, %0\n" +" copy %%r0, %1\n" +"3: \n" +" .section .fixup,\"ax\"\n" +"4: ldi -2, %1\n" + FIXUP_BRANCH(3b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,4b\n" +" .dword 2b,4b\n" +#else +" .word 1b,4b\n" +" .word 2b,4b\n" +#endif +" .previous\n" + : "=r" (val), "=r" (ret) + : "0" (val), "r" (saddr), "r" (regs->isr) + : "r20" ); + + DPRINTF("val = 0x" RFMT "\n", val); + + if (toreg) + regs->gr[toreg] = val; + + return ret; +} + +static int emulate_ldw(struct pt_regs *regs, int toreg, int flop) +{ + unsigned long saddr = regs->ior; + unsigned long val = 0; + int ret; + + DPRINTF("load " RFMT ":" RFMT " to r%d for 4 bytes\n", + regs->isr, regs->ior, toreg); + + __asm__ __volatile__ ( +" zdep %3,28,2,%%r19\n" /* r19=(ofs&3)*8 */ +" mtsp %4, %%sr1\n" +" depw %%r0,31,2,%3\n" +"1: ldw 0(%%sr1,%3),%0\n" +"2: ldw 4(%%sr1,%3),%%r20\n" +" subi 32,%%r19,%%r19\n" +" mtctl %%r19,11\n" +" vshd %0,%%r20,%0\n" +" copy %%r0, %1\n" +"3: \n" +" .section .fixup,\"ax\"\n" +"4: ldi -2, %1\n" + FIXUP_BRANCH(3b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,4b\n" +" .dword 2b,4b\n" +#else +" .word 1b,4b\n" +" .word 2b,4b\n" +#endif +" .previous\n" + : "=r" (val), "=r" (ret) + : "0" (val), "r" (saddr), "r" (regs->isr) + : "r19", "r20" ); + + DPRINTF("val = 0x" RFMT "\n", val); + + if (flop) + ((__u32*)(regs->fr))[toreg] = val; + else if (toreg) + regs->gr[toreg] = val; + + return ret; +} +static int emulate_ldd(struct pt_regs *regs, int toreg, int flop) +{ + unsigned long saddr = regs->ior; + __u64 val = 0; + int ret; + + DPRINTF("load " RFMT ":" RFMT " to r%d for 8 bytes\n", + regs->isr, regs->ior, toreg); +#ifdef CONFIG_PA20 + +#ifndef __LP64__ + if (!flop) + return -1; +#endif + __asm__ __volatile__ ( +" depd,z %3,60,3,%%r19\n" /* r19=(ofs&7)*8 */ +" mtsp %4, %%sr1\n" +" depd %%r0,63,3,%3\n" +"1: ldd 0(%%sr1,%3),%0\n" +"2: ldd 8(%%sr1,%3),%%r20\n" +" subi 64,%%r19,%%r19\n" +" mtsar %%r19\n" +" shrpd %0,%%r20,%%sar,%0\n" +" copy %%r0, %1\n" +"3: \n" +" .section .fixup,\"ax\"\n" +"4: ldi -2, %1\n" + FIXUP_BRANCH(3b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,4b\n" +" .dword 2b,4b\n" +#else +" .word 1b,4b\n" +" .word 2b,4b\n" +#endif +" .previous\n" + : "=r" (val), "=r" (ret) + : "0" (val), "r" (saddr), "r" (regs->isr) + : "r19", "r20" ); +#else + { + unsigned long valh=0,vall=0; + __asm__ __volatile__ ( +" zdep %5,29,2,%%r19\n" /* r19=(ofs&3)*8 */ +" mtsp %6, %%sr1\n" +" dep %%r0,31,2,%5\n" +"1: ldw 0(%%sr1,%5),%0\n" +"2: ldw 4(%%sr1,%5),%1\n" +"3: ldw 8(%%sr1,%5),%%r20\n" +" subi 32,%%r19,%%r19\n" +" mtsar %%r19\n" +" vshd %0,%1,%0\n" +" vshd %1,%%r20,%1\n" +" copy %%r0, %2\n" +"4: \n" +" .section .fixup,\"ax\"\n" +"5: ldi -2, %2\n" + FIXUP_BRANCH(4b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,5b\n" +" .dword 2b,5b\n" +" .dword 3b,5b\n" +#else +" .word 1b,5b\n" +" .word 2b,5b\n" +" .word 3b,5b\n" +#endif +" .previous\n" + : "=r" (valh), "=r" (vall), "=r" (ret) + : "0" (valh), "1" (vall), "r" (saddr), "r" (regs->isr) + : "r19", "r20" ); + val=((__u64)valh<<32)|(__u64)vall; + } +#endif + + DPRINTF("val = 0x%llx\n", val); + + if (flop) + regs->fr[toreg] = val; + else if (toreg) + regs->gr[toreg] = val; + + return ret; +} + +static int emulate_sth(struct pt_regs *regs, int frreg) +{ + unsigned long val = regs->gr[frreg]; + int ret; + + if (!frreg) + val = 0; + + DPRINTF("store r%d (0x" RFMT ") to " RFMT ":" RFMT " for 2 bytes\n", frreg, + val, regs->isr, regs->ior); + + __asm__ __volatile__ ( +" mtsp %3, %%sr1\n" +" extrw,u %1, 23, 8, %%r19\n" +"1: stb %1, 1(%%sr1, %2)\n" +"2: stb %%r19, 0(%%sr1, %2)\n" +" copy %%r0, %0\n" +"3: \n" +" .section .fixup,\"ax\"\n" +"4: ldi -2, %0\n" + FIXUP_BRANCH(3b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,4b\n" +" .dword 2b,4b\n" +#else +" .word 1b,4b\n" +" .word 2b,4b\n" +#endif +" .previous\n" + : "=r" (ret) + : "r" (val), "r" (regs->ior), "r" (regs->isr) + : "r19" ); + + return ret; +} + +static int emulate_stw(struct pt_regs *regs, int frreg, int flop) +{ + unsigned long val; + int ret; + + if (flop) + val = ((__u32*)(regs->fr))[frreg]; + else if (frreg) + val = regs->gr[frreg]; + else + val = 0; + + DPRINTF("store r%d (0x" RFMT ") to " RFMT ":" RFMT " for 4 bytes\n", frreg, + val, regs->isr, regs->ior); + + + __asm__ __volatile__ ( +" mtsp %3, %%sr1\n" +" zdep %2, 28, 2, %%r19\n" +" dep %%r0, 31, 2, %2\n" +" mtsar %%r19\n" +" depwi,z -2, %%sar, 32, %%r19\n" +"1: ldw 0(%%sr1,%2),%%r20\n" +"2: ldw 4(%%sr1,%2),%%r21\n" +" vshd %%r0, %1, %%r22\n" +" vshd %1, %%r0, %%r1\n" +" and %%r20, %%r19, %%r20\n" +" andcm %%r21, %%r19, %%r21\n" +" or %%r22, %%r20, %%r20\n" +" or %%r1, %%r21, %%r21\n" +" stw %%r20,0(%%sr1,%2)\n" +" stw %%r21,4(%%sr1,%2)\n" +" copy %%r0, %0\n" +"3: \n" +" .section .fixup,\"ax\"\n" +"4: ldi -2, %0\n" + FIXUP_BRANCH(3b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,4b\n" +" .dword 2b,4b\n" +#else +" .word 1b,4b\n" +" .word 2b,4b\n" +#endif +" .previous\n" + : "=r" (ret) + : "r" (val), "r" (regs->ior), "r" (regs->isr) + : "r19", "r20", "r21", "r22", "r1" ); + + return 0; +} +static int emulate_std(struct pt_regs *regs, int frreg, int flop) +{ + __u64 val; + int ret; + + if (flop) + val = regs->fr[frreg]; + else if (frreg) + val = regs->gr[frreg]; + else + val = 0; + + DPRINTF("store r%d (0x%016llx) to " RFMT ":" RFMT " for 8 bytes\n", frreg, + val, regs->isr, regs->ior); + +#ifdef CONFIG_PA20 +#ifndef __LP64__ + if (!flop) + return -1; +#endif + __asm__ __volatile__ ( +" mtsp %3, %%sr1\n" +" depd,z %2, 60, 3, %%r19\n" +" depd %%r0, 63, 3, %2\n" +" mtsar %%r19\n" +" depdi,z -2, %%sar, 64, %%r19\n" +"1: ldd 0(%%sr1,%2),%%r20\n" +"2: ldd 8(%%sr1,%2),%%r21\n" +" shrpd %%r0, %1, %%sar, %%r22\n" +" shrpd %1, %%r0, %%sar, %%r1\n" +" and %%r20, %%r19, %%r20\n" +" andcm %%r21, %%r19, %%r21\n" +" or %%r22, %%r20, %%r20\n" +" or %%r1, %%r21, %%r21\n" +"3: std %%r20,0(%%sr1,%2)\n" +"4: std %%r21,8(%%sr1,%2)\n" +" copy %%r0, %0\n" +"5: \n" +" .section .fixup,\"ax\"\n" +"6: ldi -2, %0\n" + FIXUP_BRANCH(5b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,6b\n" +" .dword 2b,6b\n" +" .dword 3b,6b\n" +" .dword 4b,6b\n" +#else +" .word 1b,6b\n" +" .word 2b,6b\n" +" .word 3b,6b\n" +" .word 4b,6b\n" +#endif +" .previous\n" + : "=r" (ret) + : "r" (val), "r" (regs->ior), "r" (regs->isr) + : "r19", "r20", "r21", "r22", "r1" ); +#else + { + unsigned long valh=(val>>32),vall=(val&0xffffffffl); + __asm__ __volatile__ ( +" mtsp %4, %%sr1\n" +" zdep %2, 29, 2, %%r19\n" +" dep %%r0, 31, 2, %2\n" +" mtsar %%r19\n" +" zvdepi -2, 32, %%r19\n" +"1: ldw 0(%%sr1,%3),%%r20\n" +"2: ldw 8(%%sr1,%3),%%r21\n" +" vshd %1, %2, %%r1\n" +" vshd %%r0, %1, %1\n" +" vshd %2, %%r0, %2\n" +" and %%r20, %%r19, %%r20\n" +" andcm %%r21, %%r19, %%r21\n" +" or %1, %%r20, %1\n" +" or %2, %%r21, %2\n" +"3: stw %1,0(%%sr1,%1)\n" +"4: stw %%r1,4(%%sr1,%3)\n" +"5: stw %2,8(%%sr1,%3)\n" +" copy %%r0, %0\n" +"6: \n" +" .section .fixup,\"ax\"\n" +"7: ldi -2, %0\n" + FIXUP_BRANCH(6b) +" .previous\n" +" .section __ex_table,\"aw\"\n" +#ifdef __LP64__ +" .dword 1b,7b\n" +" .dword 2b,7b\n" +" .dword 3b,7b\n" +" .dword 4b,7b\n" +" .dword 5b,7b\n" +#else +" .word 1b,7b\n" +" .word 2b,7b\n" +" .word 3b,7b\n" +" .word 4b,7b\n" +" .word 5b,7b\n" +#endif +" .previous\n" + : "=r" (ret) + : "r" (valh), "r" (vall), "r" (regs->ior), "r" (regs->isr) + : "r19", "r20", "r21", "r1" ); + } +#endif + + return ret; +} + +void handle_unaligned(struct pt_regs *regs) +{ + static unsigned long unaligned_count = 0; + static unsigned long last_time = 0; + unsigned long newbase = R1(regs->iir)?regs->gr[R1(regs->iir)]:0; + int modify = 0; + int ret = ERR_NOTHANDLED; + struct siginfo si; + register int flop=0; /* true if this is a flop */ + + /* log a message with pacing */ + if (user_mode(regs)) + { + if (unaligned_count > 5 && jiffies - last_time > 5*HZ) + { + unaligned_count = 0; + last_time = jiffies; + } + if (++unaligned_count < 5) + { + char buf[256]; + sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n", + current->comm, current->pid, regs->ior, regs->iaoq[0]); + printk(KERN_WARNING "%s", buf); +#ifdef DEBUG_UNALIGNED + show_regs(regs); +#endif + } + if (!unaligned_enabled) + goto force_sigbus; + } + + /* handle modification - OK, it's ugly, see the instruction manual */ + switch (MAJOR_OP(regs->iir)) + { + case 0x03: + case 0x09: + case 0x0b: + if (regs->iir&0x20) + { + modify = 1; + if (regs->iir&0x1000) /* short loads */ + if (regs->iir&0x200) + newbase += IM5_3(regs->iir); + else + newbase += IM5_2(regs->iir); + else if (regs->iir&0x2000) /* scaled indexed */ + { + int shift=0; + switch (regs->iir & OPCODE1_MASK) + { + case OPCODE_LDH_I: + shift= 1; break; + case OPCODE_LDW_I: + shift= 2; break; + case OPCODE_LDD_I: + case OPCODE_LDDA_I: + shift= 3; break; + } + newbase += (R2(regs->iir)?regs->gr[R2(regs->iir)]:0)<iir)?regs->gr[R2(regs->iir)]:0); + } + break; + case 0x13: + case 0x1b: + modify = 1; + newbase += IM14(regs->iir); + break; + case 0x14: + case 0x1c: + if (regs->iir&8) + { + modify = 1; + newbase += IM14(regs->iir&~0xe); + } + break; + case 0x16: + case 0x1e: + modify = 1; + newbase += IM14(regs->iir&6); + break; + case 0x17: + case 0x1f: + if (regs->iir&4) + { + modify = 1; + newbase += IM14(regs->iir&~4); + } + break; + } + + /* TODO: make this cleaner... */ + switch (regs->iir & OPCODE1_MASK) + { + case OPCODE_LDH_I: + case OPCODE_LDH_S: + ret = emulate_ldh(regs, R3(regs->iir)); + break; + + case OPCODE_LDW_I: + case OPCODE_LDWA_I: + case OPCODE_LDW_S: + case OPCODE_LDWA_S: + ret = emulate_ldw(regs, R3(regs->iir),0); + break; + + case OPCODE_STH: + ret = emulate_sth(regs, R2(regs->iir)); + break; + + case OPCODE_STW: + case OPCODE_STWA: + ret = emulate_stw(regs, R2(regs->iir),0); + break; + +#ifdef CONFIG_PA20 + case OPCODE_LDD_I: + case OPCODE_LDDA_I: + case OPCODE_LDD_S: + case OPCODE_LDDA_S: + ret = emulate_ldd(regs, R3(regs->iir),0); + break; + + case OPCODE_STD: + case OPCODE_STDA: + ret = emulate_std(regs, R2(regs->iir),0); + break; +#endif + + case OPCODE_FLDWX: + case OPCODE_FLDWS: + case OPCODE_FLDWXR: + case OPCODE_FLDWSR: + flop=1; + ret = emulate_ldw(regs,FR3(regs->iir),1); + break; + + case OPCODE_FLDDX: + case OPCODE_FLDDS: + flop=1; + ret = emulate_ldd(regs,R3(regs->iir),1); + break; + + case OPCODE_FSTWX: + case OPCODE_FSTWS: + case OPCODE_FSTWXR: + case OPCODE_FSTWSR: + flop=1; + ret = emulate_stw(regs,FR3(regs->iir),1); + break; + + case OPCODE_FSTDX: + case OPCODE_FSTDS: + flop=1; + ret = emulate_std(regs,R3(regs->iir),1); + break; + + case OPCODE_LDCD_I: + case OPCODE_LDCW_I: + case OPCODE_LDCD_S: + case OPCODE_LDCW_S: + ret = ERR_NOTHANDLED; /* "undefined", but lets kill them. */ + break; + } +#ifdef CONFIG_PA20 + switch (regs->iir & OPCODE2_MASK) + { + case OPCODE_FLDD_L: + flop=1; + ret = emulate_ldd(regs,R2(regs->iir),1); + break; + case OPCODE_FSTD_L: + flop=1; + ret = emulate_std(regs, R2(regs->iir),1); + break; + +#ifdef CONFIG_PA20 + case OPCODE_LDD_L: + ret = emulate_ldd(regs, R2(regs->iir),0); + break; + case OPCODE_STD_L: + ret = emulate_std(regs, R2(regs->iir),0); + break; +#endif + } +#endif + switch (regs->iir & OPCODE3_MASK) + { + case OPCODE_FLDW_L: + flop=1; + ret = emulate_ldw(regs, R2(regs->iir),0); + break; + case OPCODE_LDW_M: + ret = emulate_ldw(regs, R2(regs->iir),1); + break; + + case OPCODE_FSTW_L: + flop=1; + ret = emulate_stw(regs, R2(regs->iir),1); + break; + case OPCODE_STW_M: + ret = emulate_stw(regs, R2(regs->iir),0); + break; + } + switch (regs->iir & OPCODE4_MASK) + { + case OPCODE_LDH_L: + ret = emulate_ldh(regs, R2(regs->iir)); + break; + case OPCODE_LDW_L: + case OPCODE_LDWM: + ret = emulate_ldw(regs, R2(regs->iir),0); + break; + case OPCODE_STH_L: + ret = emulate_sth(regs, R2(regs->iir)); + break; + case OPCODE_STW_L: + case OPCODE_STWM: + ret = emulate_stw(regs, R2(regs->iir),0); + break; + } + + if (modify && R1(regs->iir)) + regs->gr[R1(regs->iir)] = newbase; + + + if (ret == ERR_NOTHANDLED) + printk(KERN_CRIT "Not-handled unaligned insn 0x%08lx\n", regs->iir); + + DPRINTF("ret = %d\n", ret); + + if (ret) + { + printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret); + die_if_kernel("Unaligned data reference", regs, 28); + + if (ret == ERR_PAGEFAULT) + { + si.si_signo = SIGSEGV; + si.si_errno = 0; + si.si_code = SEGV_MAPERR; + si.si_addr = (void __user *)regs->ior; + force_sig_info(SIGSEGV, &si, current); + } + else + { +force_sigbus: + /* couldn't handle it ... */ + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)regs->ior; + force_sig_info(SIGBUS, &si, current); + } + + return; + } + + /* else we handled it, let life go on. */ + regs->gr[0]|=PSW_N; +} + +/* + * NB: check_unaligned() is only used for PCXS processors right + * now, so we only check for PA1.1 encodings at this point. + */ + +int +check_unaligned(struct pt_regs *regs) +{ + unsigned long align_mask; + + /* Get alignment mask */ + + align_mask = 0UL; + switch (regs->iir & OPCODE1_MASK) { + + case OPCODE_LDH_I: + case OPCODE_LDH_S: + case OPCODE_STH: + align_mask = 1UL; + break; + + case OPCODE_LDW_I: + case OPCODE_LDWA_I: + case OPCODE_LDW_S: + case OPCODE_LDWA_S: + case OPCODE_STW: + case OPCODE_STWA: + align_mask = 3UL; + break; + + default: + switch (regs->iir & OPCODE4_MASK) { + case OPCODE_LDH_L: + case OPCODE_STH_L: + align_mask = 1UL; + break; + case OPCODE_LDW_L: + case OPCODE_LDWM: + case OPCODE_STW_L: + case OPCODE_STWM: + align_mask = 3UL; + break; + } + break; + } + + return (int)(regs->ior & align_mask); +} + diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c new file mode 100644 index 000000000000..db141108412e --- /dev/null +++ b/arch/parisc/kernel/unwind.c @@ -0,0 +1,393 @@ +/* + * Kernel unwinding support + * + * (c) 2002-2004 Randolph Chung + * + * Derived partially from the IA64 implementation. The PA-RISC + * Runtime Architecture Document is also a useful reference to + * understand what is happening here + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* #define DEBUG 1 */ +#ifdef DEBUG +#define dbg(x...) printk(x) +#else +#define dbg(x...) +#endif + +extern struct unwind_table_entry __start___unwind[]; +extern struct unwind_table_entry __stop___unwind[]; + +static spinlock_t unwind_lock; +/* + * the kernel unwind block is not dynamically allocated so that + * we can call unwind_init as early in the bootup process as + * possible (before the slab allocator is initialized) + */ +static struct unwind_table kernel_unwind_table; +static LIST_HEAD(unwind_tables); + +static inline const struct unwind_table_entry * +find_unwind_entry_in_table(const struct unwind_table *table, unsigned long addr) +{ + const struct unwind_table_entry *e = NULL; + unsigned long lo, hi, mid; + + lo = 0; + hi = table->length - 1; + + while (lo <= hi) { + mid = (hi - lo) / 2 + lo; + e = &table->table[mid]; + if (addr < e->region_start) + hi = mid - 1; + else if (addr > e->region_end) + lo = mid + 1; + else + return e; + } + + return NULL; +} + +static const struct unwind_table_entry * +find_unwind_entry(unsigned long addr) +{ + struct unwind_table *table; + const struct unwind_table_entry *e = NULL; + + if (addr >= kernel_unwind_table.start && + addr <= kernel_unwind_table.end) + e = find_unwind_entry_in_table(&kernel_unwind_table, addr); + else + list_for_each_entry(table, &unwind_tables, list) { + if (addr >= table->start && + addr <= table->end) + e = find_unwind_entry_in_table(table, addr); + if (e) + break; + } + + return e; +} + +static void +unwind_table_init(struct unwind_table *table, const char *name, + unsigned long base_addr, unsigned long gp, + void *table_start, void *table_end) +{ + struct unwind_table_entry *start = table_start; + struct unwind_table_entry *end = + (struct unwind_table_entry *)table_end - 1; + + table->name = name; + table->base_addr = base_addr; + table->gp = gp; + table->start = base_addr + start->region_start; + table->end = base_addr + end->region_end; + table->table = (struct unwind_table_entry *)table_start; + table->length = end - start + 1; + INIT_LIST_HEAD(&table->list); + + for (; start <= end; start++) { + if (start < end && + start->region_end > (start+1)->region_start) { + printk("WARNING: Out of order unwind entry! %p and %p\n", start, start+1); + } + + start->region_start += base_addr; + start->region_end += base_addr; + } +} + +static void +unwind_table_sort(struct unwind_table_entry *start, + struct unwind_table_entry *finish) +{ + struct unwind_table_entry el, *p, *q; + + for (p = start + 1; p < finish; ++p) { + if (p[0].region_start < p[-1].region_start) { + el = *p; + q = p; + do { + q[0] = q[-1]; + --q; + } while (q > start && + el.region_start < q[-1].region_start); + *q = el; + } + } +} + +struct unwind_table * +unwind_table_add(const char *name, unsigned long base_addr, + unsigned long gp, + void *start, void *end) +{ + struct unwind_table *table; + unsigned long flags; + struct unwind_table_entry *s = (struct unwind_table_entry *)start; + struct unwind_table_entry *e = (struct unwind_table_entry *)end; + + unwind_table_sort(s, e); + + table = kmalloc(sizeof(struct unwind_table), GFP_USER); + if (table == NULL) + return NULL; + unwind_table_init(table, name, base_addr, gp, start, end); + spin_lock_irqsave(&unwind_lock, flags); + list_add_tail(&table->list, &unwind_tables); + spin_unlock_irqrestore(&unwind_lock, flags); + + return table; +} + +void unwind_table_remove(struct unwind_table *table) +{ + unsigned long flags; + + spin_lock_irqsave(&unwind_lock, flags); + list_del(&table->list); + spin_unlock_irqrestore(&unwind_lock, flags); + + kfree(table); +} + +/* Called from setup_arch to import the kernel unwind info */ +static int unwind_init(void) +{ + long start, stop; + register unsigned long gp __asm__ ("r27"); + + start = (long)&__start___unwind[0]; + stop = (long)&__stop___unwind[0]; + + spin_lock_init(&unwind_lock); + + printk("unwind_init: start = 0x%lx, end = 0x%lx, entries = %lu\n", + start, stop, + (stop - start) / sizeof(struct unwind_table_entry)); + + unwind_table_init(&kernel_unwind_table, "kernel", KERNEL_START, + gp, + &__start___unwind[0], &__stop___unwind[0]); +#if 0 + { + int i; + for (i = 0; i < 10; i++) + { + printk("region 0x%x-0x%x\n", + __start___unwind[i].region_start, + __start___unwind[i].region_end); + } + } +#endif + return 0; +} + +static void unwind_frame_regs(struct unwind_frame_info *info) +{ + const struct unwind_table_entry *e; + unsigned long npc; + unsigned int insn; + long frame_size = 0; + int looking_for_rp, rpoffset = 0; + + e = find_unwind_entry(info->ip); + if (e == NULL) { + unsigned long sp; + extern char _stext[], _etext[]; + + dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip); + +#ifdef CONFIG_KALLSYMS + /* Handle some frequent special cases.... */ + { + char symname[KSYM_NAME_LEN+1]; + char *modname; + unsigned long symsize, offset; + + kallsyms_lookup(info->ip, &symsize, &offset, + &modname, symname); + + dbg("info->ip = 0x%lx, name = %s\n", info->ip, symname); + + if (strcmp(symname, "_switch_to_ret") == 0) { + info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE; + info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET); + dbg("_switch_to_ret @ %lx - setting " + "prev_sp=%lx prev_ip=%lx\n", + info->ip, info->prev_sp, + info->prev_ip); + return; + } else if (strcmp(symname, "ret_from_kernel_thread") == 0 || + strcmp(symname, "syscall_exit") == 0) { + info->prev_ip = info->prev_sp = 0; + return; + } + } +#endif + + /* Since we are doing the unwinding blind, we don't know if + we are adjusting the stack correctly or extracting the rp + correctly. The rp is checked to see if it belongs to the + kernel text section, if not we assume we don't have a + correct stack frame and we continue to unwind the stack. + This is not quite correct, and will fail for loadable + modules. */ + sp = info->sp & ~63; + do { + unsigned long tmp; + + info->prev_sp = sp - 64; + info->prev_ip = 0; + if (get_user(tmp, (unsigned long *)(info->prev_sp - RP_OFFSET))) + break; + info->prev_ip = tmp; + sp = info->prev_sp; + } while (info->prev_ip < (unsigned long)_stext || + info->prev_ip > (unsigned long)_etext); + + info->rp = 0; + + dbg("analyzing func @ %lx with no unwind info, setting " + "prev_sp=%lx prev_ip=%lx\n", info->ip, + info->prev_sp, info->prev_ip); + } else { + dbg("e->start = 0x%x, e->end = 0x%x, Save_SP = %d, " + "Save_RP = %d, Millicode = %d size = %u\n", + e->region_start, e->region_end, e->Save_SP, e->Save_RP, + e->Millicode, e->Total_frame_size); + + looking_for_rp = e->Save_RP; + + for (npc = e->region_start; + (frame_size < (e->Total_frame_size << 3) || + looking_for_rp) && + npc < info->ip; + npc += 4) { + + insn = *(unsigned int *)npc; + + if ((insn & 0xffffc000) == 0x37de0000 || + (insn & 0xffe00000) == 0x6fc00000) { + /* ldo X(sp), sp, or stwm X,D(sp) */ + frame_size += (insn & 0x1 ? -1 << 13 : 0) | + ((insn & 0x3fff) >> 1); + dbg("analyzing func @ %lx, insn=%08x @ " + "%lx, frame_size = %ld\n", info->ip, + insn, npc, frame_size); + } else if ((insn & 0xffe00008) == 0x73c00008) { + /* std,ma X,D(sp) */ + frame_size += (insn & 0x1 ? -1 << 13 : 0) | + (((insn >> 4) & 0x3ff) << 3); + dbg("analyzing func @ %lx, insn=%08x @ " + "%lx, frame_size = %ld\n", info->ip, + insn, npc, frame_size); + } else if (insn == 0x6bc23fd9) { + /* stw rp,-20(sp) */ + rpoffset = 20; + looking_for_rp = 0; + dbg("analyzing func @ %lx, insn=stw rp," + "-20(sp) @ %lx\n", info->ip, npc); + } else if (insn == 0x0fc212c1) { + /* std rp,-16(sr0,sp) */ + rpoffset = 16; + looking_for_rp = 0; + dbg("analyzing func @ %lx, insn=std rp," + "-16(sp) @ %lx\n", info->ip, npc); + } + } + + info->prev_sp = info->sp - frame_size; + if (e->Millicode) + info->rp = info->r31; + else if (rpoffset) + info->rp = *(unsigned long *)(info->prev_sp - rpoffset); + info->prev_ip = info->rp; + info->rp = 0; + + dbg("analyzing func @ %lx, setting prev_sp=%lx " + "prev_ip=%lx npc=%lx\n", info->ip, info->prev_sp, + info->prev_ip, npc); + } +} + +void unwind_frame_init(struct unwind_frame_info *info, struct task_struct *t, + struct pt_regs *regs) +{ + memset(info, 0, sizeof(struct unwind_frame_info)); + info->t = t; + info->sp = regs->gr[30]; + info->ip = regs->iaoq[0]; + info->rp = regs->gr[2]; + info->r31 = regs->gr[31]; + + dbg("(%d) Start unwind from sp=%08lx ip=%08lx\n", + t ? (int)t->pid : -1, info->sp, info->ip); +} + +void unwind_frame_init_from_blocked_task(struct unwind_frame_info *info, struct task_struct *t) +{ + struct pt_regs *r = &t->thread.regs; + struct pt_regs *r2; + + r2 = (struct pt_regs *)kmalloc(sizeof(struct pt_regs), GFP_KERNEL); + if (!r2) + return; + *r2 = *r; + r2->gr[30] = r->ksp; + r2->iaoq[0] = r->kpc; + unwind_frame_init(info, t, r2); + kfree(r2); +} + +void unwind_frame_init_running(struct unwind_frame_info *info, struct pt_regs *regs) +{ + unwind_frame_init(info, current, regs); +} + +int unwind_once(struct unwind_frame_info *next_frame) +{ + unwind_frame_regs(next_frame); + + if (next_frame->prev_sp == 0 || + next_frame->prev_ip == 0) + return -1; + + next_frame->sp = next_frame->prev_sp; + next_frame->ip = next_frame->prev_ip; + next_frame->prev_sp = 0; + next_frame->prev_ip = 0; + + dbg("(%d) Continue unwind to sp=%08lx ip=%08lx\n", + next_frame->t ? (int)next_frame->t->pid : -1, + next_frame->sp, next_frame->ip); + + return 0; +} + +int unwind_to_user(struct unwind_frame_info *info) +{ + int ret; + + do { + ret = unwind_once(info); + } while (!ret && !(info->ip & 3)); + + return ret; +} + +module_init(unwind_init); diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..e5fac3e08c7a --- /dev/null +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -0,0 +1,207 @@ +/* Kernel link layout for various "sections" + * + * Copyright (C) 1999-2003 Matthew Wilcox + * Copyright (C) 2000-2003 Paul Bame + * Copyright (C) 2000 John Marvin + * Copyright (C) 2000 Michael Ang + * Copyright (C) 2002 Randolph Chung + * Copyright (C) 2003 James Bottomley + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +/* needed for the processor specific cache alignment size */ +#include +#include + +/* ld script to make hppa Linux kernel */ +#ifndef CONFIG_64BIT +OUTPUT_FORMAT("elf32-hppa-linux") +OUTPUT_ARCH(hppa) +#else +OUTPUT_FORMAT("elf64-hppa-linux") +OUTPUT_ARCH(hppa:hppa2.0w) +#endif + +ENTRY(_stext) +#ifndef CONFIG_64BIT +jiffies = jiffies_64 + 4; +#else +jiffies = jiffies_64; +#endif +SECTIONS +{ + + . = KERNEL_BINARY_TEXT_START; + + _text = .; /* Text and read-only data */ + .text ALIGN(16) : { + *(.text) + SCHED_TEXT + LOCK_TEXT + *(.text.do_softirq) + *(.text.sys_exit) + *(.text.do_sigaltstack) + *(.text.do_fork) + *(.text.*) + *(.fixup) + *(.lock.text) /* out-of-line lock text */ + *(.gnu.warning) + } = 0 + + _etext = .; /* End of text section */ + + RODATA + + /* writeable */ + . = ALIGN(4096); /* Make sure this is paged aligned so + that we can properly leave these + as writable */ + data_start = .; + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + __start___unwind = .; /* unwind info */ + .PARISC.unwind : { *(.PARISC.unwind) } + __stop___unwind = .; + + .data : { /* Data */ + *(.data) + *(.data.vm0.pmd) + *(.data.vm0.pgd) + *(.data.vm0.pte) + CONSTRUCTORS + } + + . = ALIGN(4096); + /* nosave data is really only used for software suspend...it's here + * just in case we ever implement it */ + __nosave_begin = .; + .data_nosave : { *(.data.nosave) } + . = ALIGN(4096); + __nosave_end = .; + + . = ALIGN(L1_CACHE_BYTES); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + /* PA-RISC locks requires 16-byte alignment */ + . = ALIGN(16); + .data.lock_aligned : { *(.data.lock_aligned) } + + _edata = .; /* End of data section */ + + . = ALIGN(16384); /* init_task */ + .data.init_task : { *(.data.init_task) } + + /* The interrupt stack is currently partially coded, but not yet + * implemented */ + . = ALIGN(16384); + init_istack : { *(init_istack) } + +#ifdef CONFIG_64BIT + . = ALIGN(16); /* Linkage tables */ + .opd : { *(.opd) } PROVIDE (__gp = .); + .plt : { *(.plt) } + .dlt : { *(.dlt) } +#endif + + . = ALIGN(16384); + __init_begin = .; + .init.text : { + _sinittext = .; + *(.init.text) + _einittext = .; + } + .init.data : { *(.init.data) } + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { + *(.initcall1.init) + *(.initcall2.init) + *(.initcall3.init) + *(.initcall4.init) + *(.initcall5.init) + *(.initcall6.init) + *(.initcall7.init) + } + __initcall_end = .; + __con_initcall_start = .; + .con_initcall.init : { *(.con_initcall.init) } + __con_initcall_end = .; + SECURITY_INIT + /* alternate instruction replacement. This is a mechanism x86 uses + * to detect the CPU type and replace generic instruction sequences + * with CPU specific ones. We don't currently do this in PA, but + * it seems like a good idea... */ + . = ALIGN(4); + __alt_instructions = .; + .altinstructions : { *(.altinstructions) } + __alt_instructions_end = .; + .altinstr_replacement : { *(.altinstr_replacement) } + /* .exit.text is discard at runtime, not link time, to deal with references + from .altinstructions and .eh_frame */ + .exit.text : { *(.exit.text) } + .exit.data : { *(.exit.data) } + . = ALIGN(4096); + __initramfs_start = .; + .init.ramfs : { *(.init.ramfs) } + __initramfs_end = .; + . = ALIGN(32); + __per_cpu_start = .; + .data.percpu : { *(.data.percpu) } + __per_cpu_end = .; + . = ALIGN(4096); + __init_end = .; + /* freed after init ends here */ + + __bss_start = .; /* BSS */ + .bss : { *(.bss) *(COMMON) } + __bss_stop = .; + + _end = . ; + + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) +#ifdef CONFIG_64BIT + /* temporary hack until binutils is fixed to not emit these + for static binaries */ + *(.interp) + *(.dynsym) + *(.dynstr) + *(.dynamic) + *(.hash) +#endif + } + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .note 0 : { *(.note) } + +} diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile new file mode 100644 index 000000000000..7bf705676297 --- /dev/null +++ b/arch/parisc/lib/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for parisc-specific library files +# + +lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o + +obj-y := iomap.o + +lib-$(CONFIG_SMP) += debuglocks.o diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c new file mode 100644 index 000000000000..2de182f6fe8a --- /dev/null +++ b/arch/parisc/lib/bitops.c @@ -0,0 +1,84 @@ +/* + * bitops.c: atomic operations which got too long to be inlined all over + * the place. + * + * Copyright 1999 Philipp Rumpf (prumpf@tux.org) + * Copyright 2000 Grant Grundler (grundler@cup.hp.com) + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_SMP +spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned = { + [0 ... (ATOMIC_HASH_SIZE-1)] = SPIN_LOCK_UNLOCKED +}; +#endif + +#ifdef __LP64__ +unsigned long __xchg64(unsigned long x, unsigned long *ptr) +{ + unsigned long temp, flags; + + _atomic_spin_lock_irqsave(ptr, flags); + temp = *ptr; + *ptr = x; + _atomic_spin_unlock_irqrestore(ptr, flags); + return temp; +} +#endif + +unsigned long __xchg32(int x, int *ptr) +{ + unsigned long flags; + long temp; + + _atomic_spin_lock_irqsave(ptr, flags); + temp = (long) *ptr; /* XXX - sign extension wanted? */ + *ptr = x; + _atomic_spin_unlock_irqrestore(ptr, flags); + return (unsigned long)temp; +} + + +unsigned long __xchg8(char x, char *ptr) +{ + unsigned long flags; + long temp; + + _atomic_spin_lock_irqsave(ptr, flags); + temp = (long) *ptr; /* XXX - sign extension wanted? */ + *ptr = x; + _atomic_spin_unlock_irqrestore(ptr, flags); + return (unsigned long)temp; +} + + +#ifdef __LP64__ +unsigned long __cmpxchg_u64(volatile unsigned long *ptr, unsigned long old, unsigned long new) +{ + unsigned long flags; + unsigned long prev; + + _atomic_spin_lock_irqsave(ptr, flags); + if ((prev = *ptr) == old) + *ptr = new; + _atomic_spin_unlock_irqrestore(ptr, flags); + return prev; +} +#endif + +unsigned long __cmpxchg_u32(volatile unsigned int *ptr, unsigned int old, unsigned int new) +{ + unsigned long flags; + unsigned int prev; + + _atomic_spin_lock_irqsave(ptr, flags); + if ((prev = *ptr) == old) + *ptr = new; + _atomic_spin_unlock_irqrestore(ptr, flags); + return (unsigned long)prev; +} diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c new file mode 100644 index 000000000000..8a1e08068e7d --- /dev/null +++ b/arch/parisc/lib/checksum.c @@ -0,0 +1,148 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * MIPS specific IP/TCP/UDP checksumming routines + * + * Authors: Ralf Baechle, + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $ + */ +#include +#include + +#include +#include +#include +#include + +#define addc(_t,_r) \ + __asm__ __volatile__ ( \ +" add %0, %1, %0\n" \ +" addc %0, %%r0, %0\n" \ + : "=r"(_t) \ + : "r"(_r), "0"(_t)); + +static inline unsigned short from32to16(unsigned int x) +{ + /* 32 bits --> 16 bits + carry */ + x = (x & 0xffff) + (x >> 16); + /* 16 bits + carry --> 16 bits including carry */ + x = (x & 0xffff) + (x >> 16); + return (unsigned short)x; +} + +static inline unsigned int do_csum(const unsigned char * buff, int len) +{ + int odd, count; + unsigned int result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = be16_to_cpu(*buff); + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(unsigned short *) buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { + while (count >= 4) { + unsigned int r1, r2, r3, r4; + r1 = *(unsigned int *)(buff + 0); + r2 = *(unsigned int *)(buff + 4); + r3 = *(unsigned int *)(buff + 8); + r4 = *(unsigned int *)(buff + 12); + addc(result, r1); + addc(result, r2); + addc(result, r3); + addc(result, r4); + count -= 4; + buff += 16; + } + while (count) { + unsigned int w = *(unsigned int *) buff; + count--; + buff += 4; + addc(result, w); + } + result = (result & 0xffff) + (result >> 16); + } + if (len & 2) { + result += *(unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += le16_to_cpu(*buff); + result = from32to16(result); + if (odd) + result = swab16(result); +out: + return result; +} + +/* + * computes a partial checksum, e.g. for TCP/UDP fragments + */ +unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum) +{ + unsigned int result = do_csum(buff, len); + addc(result, sum); + return from32to16(result); +} + +EXPORT_SYMBOL(csum_partial); + +/* + * copy while checksumming, otherwise like csum_partial + */ +unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst, + int len, unsigned int sum) +{ + /* + * It's 2:30 am and I don't feel like doing it real ... + * This is lots slower than the real thing (tm) + */ + sum = csum_partial(src, len, sum); + memcpy(dst, src, len); + + return sum; +} +EXPORT_SYMBOL(csum_partial_copy_nocheck); + +/* + * Copy from userspace and compute checksum. If we catch an exception + * then zero the rest of the buffer. + */ +unsigned int csum_partial_copy_from_user(const unsigned char __user *src, + unsigned char *dst, int len, + unsigned int sum, int *err_ptr) +{ + int missing; + + missing = copy_from_user(dst, src, len); + if (missing) { + memset(dst + len - missing, 0, missing); + *err_ptr = -EFAULT; + } + + return csum_partial(dst, len, sum); +} +EXPORT_SYMBOL(csum_partial_copy_from_user); diff --git a/arch/parisc/lib/debuglocks.c b/arch/parisc/lib/debuglocks.c new file mode 100644 index 000000000000..1b33fe6e5b7a --- /dev/null +++ b/arch/parisc/lib/debuglocks.c @@ -0,0 +1,277 @@ +/* + * Debugging versions of SMP locking primitives. + * + * Copyright (C) 2004 Thibaut VARENE + * + * Some code stollen from alpha & sparc64 ;) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * We use pdc_printf() throughout the file for all output messages, to avoid + * losing messages because of disabled interrupts. Since we're using these + * messages for debugging purposes, it makes sense not to send them to the + * linux console. + */ + + +#include +#include +#include +#include +#include /* in_interrupt() */ +#include +#include /* in_interrupt() */ +#include + +#undef INIT_STUCK +#define INIT_STUCK 1L << 30 + +#ifdef CONFIG_DEBUG_SPINLOCK + + +void _dbg_spin_lock(spinlock_t * lock, const char *base_file, int line_no) +{ + volatile unsigned int *a; + long stuck = INIT_STUCK; + void *inline_pc = __builtin_return_address(0); + unsigned long started = jiffies; + int printed = 0; + int cpu = smp_processor_id(); + +try_again: + + /* Do the actual locking */ + /* ggg: we can't get stuck on the outter loop? + * T-Bone: We can hit the outer loop + * alot if multiple CPUs are constantly racing for a lock + * and the backplane is NOT fair about which CPU sees + * the update first. But it won't hang since every failed + * attempt will drop us back into the inner loop and + * decrement `stuck'. + * K-class and some of the others are NOT fair in the HW + * implementation so we could see false positives. + * But fixing the lock contention is easier than + * fixing the HW to be fair. + * __ldcw() returns 1 if we get the lock; otherwise we + * spin until the value of the lock changes, or we time out. + */ + mb(); + a = __ldcw_align(lock); + while (stuck && (__ldcw(a) == 0)) + while ((*a == 0) && --stuck); + mb(); + + if (unlikely(stuck <= 0)) { + pdc_printf( + "%s:%d: spin_lock(%s/%p) stuck in %s at %p(%d)" + " owned by %s:%d in %s at %p(%d)\n", + base_file, line_no, lock->module, lock, + current->comm, inline_pc, cpu, + lock->bfile, lock->bline, lock->task->comm, + lock->previous, lock->oncpu); + stuck = INIT_STUCK; + printed = 1; + goto try_again; + } + + /* Exiting. Got the lock. */ + lock->oncpu = cpu; + lock->previous = inline_pc; + lock->task = current; + lock->bfile = (char *)base_file; + lock->bline = line_no; + + if (unlikely(printed)) { + pdc_printf( + "%s:%d: spin_lock grabbed in %s at %p(%d) %ld ticks\n", + base_file, line_no, current->comm, inline_pc, + cpu, jiffies - started); + } +} + +void _dbg_spin_unlock(spinlock_t * lock, const char *base_file, int line_no) +{ + CHECK_LOCK(lock); + volatile unsigned int *a; + mb(); + a = __ldcw_align(lock); + if (unlikely((*a != 0) && lock->babble)) { + lock->babble--; + pdc_printf( + "%s:%d: spin_unlock(%s:%p) not locked\n", + base_file, line_no, lock->module, lock); + } + *a = 1; + mb(); +} + +int _dbg_spin_trylock(spinlock_t * lock, const char *base_file, int line_no) +{ + int ret; + volatile unsigned int *a; + mb(); + a = __ldcw_align(lock); + ret = (__ldcw(a) != 0); + mb(); + if (ret) { + lock->oncpu = smp_processor_id(); + lock->previous = __builtin_return_address(0); + lock->task = current; + } else { + lock->bfile = (char *)base_file; + lock->bline = line_no; + } + return ret; +} + +#endif /* CONFIG_DEBUG_SPINLOCK */ + +#ifdef CONFIG_DEBUG_RWLOCK + +/* Interrupts trouble detailed explanation, thx Grant: + * + * o writer (wants to modify data) attempts to acquire the rwlock + * o He gets the write lock. + * o Interupts are still enabled, we take an interrupt with the + * write still holding the lock. + * o interrupt handler tries to acquire the rwlock for read. + * o deadlock since the writer can't release it at this point. + * + * In general, any use of spinlocks that competes between "base" + * level and interrupt level code will risk deadlock. Interrupts + * need to be disabled in the base level routines to avoid it. + * Or more precisely, only the IRQ the base level routine + * is competing with for the lock. But it's more efficient/faster + * to just disable all interrupts on that CPU to guarantee + * once it gets the lock it can release it quickly too. + */ + +void _dbg_write_lock(rwlock_t *rw, const char *bfile, int bline) +{ + void *inline_pc = __builtin_return_address(0); + unsigned long started = jiffies; + long stuck = INIT_STUCK; + int printed = 0; + int cpu = smp_processor_id(); + + if(unlikely(in_interrupt())) { /* acquiring write lock in interrupt context, bad idea */ + pdc_printf("write_lock caller: %s:%d, IRQs enabled,\n", bfile, bline); + BUG(); + } + + /* Note: if interrupts are disabled (which is most likely), the printk + will never show on the console. We might need a polling method to flush + the dmesg buffer anyhow. */ + +retry: + _raw_spin_lock(&rw->lock); + + if(rw->counter != 0) { + /* this basically never happens */ + _raw_spin_unlock(&rw->lock); + + stuck--; + if ((unlikely(stuck <= 0)) && (rw->counter < 0)) { + pdc_printf( + "%s:%d: write_lock stuck on writer" + " in %s at %p(%d) %ld ticks\n", + bfile, bline, current->comm, inline_pc, + cpu, jiffies - started); + stuck = INIT_STUCK; + printed = 1; + } + else if (unlikely(stuck <= 0)) { + pdc_printf( + "%s:%d: write_lock stuck on reader" + " in %s at %p(%d) %ld ticks\n", + bfile, bline, current->comm, inline_pc, + cpu, jiffies - started); + stuck = INIT_STUCK; + printed = 1; + } + + while(rw->counter != 0); + + goto retry; + } + + /* got it. now leave without unlocking */ + rw->counter = -1; /* remember we are locked */ + + if (unlikely(printed)) { + pdc_printf( + "%s:%d: write_lock grabbed in %s at %p(%d) %ld ticks\n", + bfile, bline, current->comm, inline_pc, + cpu, jiffies - started); + } +} + +int _dbg_write_trylock(rwlock_t *rw, const char *bfile, int bline) +{ +#if 0 + void *inline_pc = __builtin_return_address(0); + int cpu = smp_processor_id(); +#endif + + if(unlikely(in_interrupt())) { /* acquiring write lock in interrupt context, bad idea */ + pdc_printf("write_lock caller: %s:%d, IRQs enabled,\n", bfile, bline); + BUG(); + } + + /* Note: if interrupts are disabled (which is most likely), the printk + will never show on the console. We might need a polling method to flush + the dmesg buffer anyhow. */ + + _raw_spin_lock(&rw->lock); + + if(rw->counter != 0) { + /* this basically never happens */ + _raw_spin_unlock(&rw->lock); + return 0; + } + + /* got it. now leave without unlocking */ + rw->counter = -1; /* remember we are locked */ +#if 0 + pdc_printf("%s:%d: try write_lock grabbed in %s at %p(%d)\n", + bfile, bline, current->comm, inline_pc, cpu); +#endif + return 1; +} + +void _dbg_read_lock(rwlock_t * rw, const char *bfile, int bline) +{ +#if 0 + void *inline_pc = __builtin_return_address(0); + unsigned long started = jiffies; + int cpu = smp_processor_id(); +#endif + unsigned long flags; + + local_irq_save(flags); + _raw_spin_lock(&rw->lock); + + rw->counter++; +#if 0 + pdc_printf( + "%s:%d: read_lock grabbed in %s at %p(%d) %ld ticks\n", + bfile, bline, current->comm, inline_pc, + cpu, jiffies - started); +#endif + _raw_spin_unlock(&rw->lock); + local_irq_restore(flags); +} + +#endif /* CONFIG_DEBUG_RWLOCK */ diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S new file mode 100644 index 000000000000..134f0cd240f5 --- /dev/null +++ b/arch/parisc/lib/fixup.S @@ -0,0 +1,89 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Copyright (C) 2004 Randolph Chung + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Fixup routines for kernel exception handling. + */ +#include +#include +#include +#include + +#ifdef CONFIG_SMP + .macro get_fault_ip t1 t2 + addil LT%__per_cpu_offset,%r27 + LDREG RT%__per_cpu_offset(%r1),\t1 + /* t2 = smp_processor_id() */ + mfctl 30,\t2 + ldw TI_CPU(\t2),\t2 +#ifdef __LP64__ + extrd,u \t2,63,32,\t2 +#endif + /* t2 = &__per_cpu_offset[smp_processor_id()]; */ + LDREG,s \t2(\t1),\t2 + addil LT%per_cpu__exception_data,%r27 + LDREG RT%per_cpu__exception_data(%r1),\t1 + /* t1 = &__get_cpu_var(exception_data) */ + add,l \t1,\t2,\t1 + /* t1 = t1->fault_ip */ + LDREG EXCDATA_IP(\t1), \t1 + .endm +#else + .macro get_fault_ip t1 t2 + /* t1 = &__get_cpu_var(exception_data) */ + addil LT%per_cpu__exception_data,%r27 + LDREG RT%per_cpu__exception_data(%r1),\t2 + /* t1 = t2->fault_ip */ + LDREG EXCDATA_IP(\t2), \t1 + .endm +#endif + + .text + .section .fixup, "ax" + + /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */ + .export fixup_get_user_skip_1 +fixup_get_user_skip_1: + get_fault_ip %r1,%r8 + ldo 4(%r1), %r1 + ldi -EFAULT, %r8 + bv %r0(%r1) + copy %r0, %r9 + + .export fixup_get_user_skip_2 +fixup_get_user_skip_2: + get_fault_ip %r1,%r8 + ldo 8(%r1), %r1 + ldi -EFAULT, %r8 + bv %r0(%r1) + copy %r0, %r9 + + /* put_user() fixups, store -EFAULT in r8 */ + .export fixup_put_user_skip_1 +fixup_put_user_skip_1: + get_fault_ip %r1,%r8 + ldo 4(%r1), %r1 + bv %r0(%r1) + ldi -EFAULT, %r8 + + .export fixup_put_user_skip_2 +fixup_put_user_skip_2: + get_fault_ip %r1,%r8 + ldo 8(%r1), %r1 + bv %r0(%r1) + ldi -EFAULT, %r8 diff --git a/arch/parisc/lib/io.c b/arch/parisc/lib/io.c new file mode 100644 index 000000000000..7c1406ff825e --- /dev/null +++ b/arch/parisc/lib/io.c @@ -0,0 +1,488 @@ +/* + * arch/parisc/lib/io.c + * + * Copyright (c) Matthew Wilcox 2001 for Hewlett-Packard + * Copyright (c) Randolph Chung 2001 + * + * IO accessing functions which shouldn't be inlined because they're too big + */ + +#include +#include +#include + +/* Copies a block of memory to a device in an efficient manner. + * Assumes the device can cope with 32-bit transfers. If it can't, + * don't use this function. + */ +void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + if (((unsigned long)dst & 3) != ((unsigned long)src & 3)) + goto bytecopy; + while ((unsigned long)dst & 3) { + writeb(*(char *)src, dst++); + src++; + count--; + } + while (count > 3) { + __raw_writel(*(u32 *)src, dst); + src += 4; + dst += 4; + count -= 4; + } + bytecopy: + while (count--) { + writeb(*(char *)src, dst++); + src++; + } +} + +/* +** Copies a block of memory from a device in an efficient manner. +** Assumes the device can cope with 32-bit transfers. If it can't, +** don't use this function. +** +** CR16 counts on C3000 reading 256 bytes from Symbios 896 RAM: +** 27341/64 = 427 cyc per int +** 61311/128 = 478 cyc per short +** 122637/256 = 479 cyc per byte +** Ergo bus latencies dominant (not transfer size). +** Minimize total number of transfers at cost of CPU cycles. +** TODO: only look at src alignment and adjust the stores to dest. +*/ +void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + /* first compare alignment of src/dst */ + if ( (((unsigned long)dst ^ (unsigned long)src) & 1) || (count < 2) ) + goto bytecopy; + + if ( (((unsigned long)dst ^ (unsigned long)src) & 2) || (count < 4) ) + goto shortcopy; + + /* Then check for misaligned start address */ + if ((unsigned long)src & 1) { + *(u8 *)dst = readb(src); + src++; + dst++; + count--; + if (count < 2) goto bytecopy; + } + + if ((unsigned long)src & 2) { + *(u16 *)dst = __raw_readw(src); + src += 2; + dst += 2; + count -= 2; + } + + while (count > 3) { + *(u32 *)dst = __raw_readl(src); + dst += 4; + src += 4; + count -= 4; + } + + shortcopy: + while (count > 1) { + *(u16 *)dst = __raw_readw(src); + src += 2; + dst += 2; + count -= 2; + } + + bytecopy: + while (count--) { + *(char *)dst = readb(src); + src++; + dst++; + } +} + +/* Sets a block of memory on a device to a given value. + * Assumes the device can cope with 32-bit transfers. If it can't, + * don't use this function. + */ +void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + u32 val32 = (val << 24) | (val << 16) | (val << 8) | val; + while ((unsigned long)addr & 3) { + writeb(val, addr++); + count--; + } + while (count > 3) { + __raw_writel(val32, addr); + addr += 4; + count -= 4; + } + while (count--) { + writeb(val, addr++); + } +} + +/* + * Read COUNT 8-bit bytes from port PORT into memory starting at + * SRC. + */ +void insb (unsigned long port, void *dst, unsigned long count) +{ + unsigned char *p; + + p = (unsigned char *)dst; + + while (((unsigned long)p) & 0x3) { + if (!count) + return; + count--; + *p = inb(port); + p++; + } + + while (count >= 4) { + unsigned int w; + count -= 4; + w = inb(port) << 24; + w |= inb(port) << 16; + w |= inb(port) << 8; + w |= inb(port); + *(unsigned int *) p = w; + p += 4; + } + + while (count) { + --count; + *p = inb(port); + p++; + } +} + + +/* + * Read COUNT 16-bit words from port PORT into memory starting at + * SRC. SRC must be at least short aligned. This is used by the + * IDE driver to read disk sectors. Performance is important, but + * the interfaces seems to be slow: just using the inlined version + * of the inw() breaks things. + */ +void insw (unsigned long port, void *dst, unsigned long count) +{ + unsigned int l = 0, l2; + unsigned char *p; + + p = (unsigned char *)dst; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count>=2) { + + count -= 2; + l = cpu_to_le16(inw(port)) << 16; + l |= cpu_to_le16(inw(port)); + *(unsigned int *)p = l; + p += 4; + } + if (count) { + *(unsigned short *)p = cpu_to_le16(inw(port)); + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + *(unsigned short *)p = cpu_to_le16(inw(port)); + p += 2; + count--; + while (count>=2) { + + count -= 2; + l = cpu_to_le16(inw(port)) << 16; + l |= cpu_to_le16(inw(port)); + *(unsigned int *)p = l; + p += 4; + } + if (count) { + *(unsigned short *)p = cpu_to_le16(inw(port)); + } + break; + + case 0x01: /* Buffer 8-bit aligned */ + case 0x03: + /* I don't bother with 32bit transfers + * in this case, 16bit will have to do -- DE */ + --count; + + l = cpu_to_le16(inw(port)); + *p = l >> 8; + p++; + while (count--) + { + l2 = cpu_to_le16(inw(port)); + *(unsigned short *)p = (l & 0xff) << 8 | (l2 >> 8); + p += 2; + l = l2; + } + *p = l & 0xff; + break; + } +} + + + +/* + * Read COUNT 32-bit words from port PORT into memory starting at + * SRC. Now works with any alignment in SRC. Performance is important, + * but the interfaces seems to be slow: just using the inlined version + * of the inl() breaks things. + */ +void insl (unsigned long port, void *dst, unsigned long count) +{ + unsigned int l = 0, l2; + unsigned char *p; + + p = (unsigned char *)dst; + + if (!count) + return; + + switch (((unsigned long) dst) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count--) + { + *(unsigned int *)p = cpu_to_le32(inl(port)); + p += 4; + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *(unsigned short *)p = l >> 16; + p += 2; + + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xffff) << 16 | (l2 >> 16); + p += 4; + l = l2; + } + *(unsigned short *)p = l & 0xffff; + break; + case 0x01: /* Buffer 8-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *(unsigned char *)p = l >> 24; + p++; + *(unsigned short *)p = (l >> 8) & 0xffff; + p += 2; + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xff) << 24 | (l2 >> 8); + p += 4; + l = l2; + } + *p = l & 0xff; + break; + case 0x03: /* Buffer 8-bit aligned */ + --count; + + l = cpu_to_le32(inl(port)); + *p = l >> 24; + p++; + while (count--) + { + l2 = cpu_to_le32(inl(port)); + *(unsigned int *)p = (l & 0xffffff) << 8 | l2 >> 24; + p += 4; + l = l2; + } + *(unsigned short *)p = (l >> 8) & 0xffff; + p += 2; + *p = l & 0xff; + break; + } +} + + +/* + * Like insb but in the opposite direction. + * Don't worry as much about doing aligned memory transfers: + * doing byte reads the "slow" way isn't nearly as slow as + * doing byte writes the slow way (no r-m-w cycle). + */ +void outsb(unsigned long port, const void * src, unsigned long count) +{ + const unsigned char *p; + + p = (const unsigned char *)src; + while (count) { + count--; + outb(*p, port); + p++; + } +} + +/* + * Like insw but in the opposite direction. This is used by the IDE + * driver to write disk sectors. Performance is important, but the + * interfaces seems to be slow: just using the inlined version of the + * outw() breaks things. + */ +void outsw (unsigned long port, const void *src, unsigned long count) +{ + unsigned int l = 0, l2; + const unsigned char *p; + + p = (const unsigned char *)src; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count>=2) { + count -= 2; + l = *(unsigned int *)p; + p += 4; + outw(le16_to_cpu(l >> 16), port); + outw(le16_to_cpu(l & 0xffff), port); + } + if (count) { + outw(le16_to_cpu(*(unsigned short*)p), port); + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + + outw(le16_to_cpu(*(unsigned short*)p), port); + p += 2; + count--; + + while (count>=2) { + count -= 2; + l = *(unsigned int *)p; + p += 4; + outw(le16_to_cpu(l >> 16), port); + outw(le16_to_cpu(l & 0xffff), port); + } + if (count) { + outw(le16_to_cpu(*(unsigned short *)p), port); + } + break; + + case 0x01: /* Buffer 8-bit aligned */ + /* I don't bother with 32bit transfers + * in this case, 16bit will have to do -- DE */ + + l = *p << 8; + p++; + count--; + while (count) + { + count--; + l2 = *(unsigned short *)p; + p += 2; + outw(le16_to_cpu(l | l2 >> 8), port); + l = l2 << 8; + } + l2 = *(unsigned char *)p; + outw (le16_to_cpu(l | l2>>8), port); + break; + + } +} + + +/* + * Like insl but in the opposite direction. This is used by the IDE + * driver to write disk sectors. Works with any alignment in SRC. + * Performance is important, but the interfaces seems to be slow: + * just using the inlined version of the outl() breaks things. + */ +void outsl (unsigned long port, const void *src, unsigned long count) +{ + unsigned int l = 0, l2; + const unsigned char *p; + + p = (const unsigned char *)src; + + if (!count) + return; + + switch (((unsigned long)p) & 0x3) + { + case 0x00: /* Buffer 32-bit aligned */ + while (count--) + { + outl(le32_to_cpu(*(unsigned int *)p), port); + p += 4; + } + break; + + case 0x02: /* Buffer 16-bit aligned */ + --count; + + l = *(unsigned short *)p; + p += 2; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l << 16 | l2 >> 16), port); + l = l2; + } + l2 = *(unsigned short *)p; + outl (le32_to_cpu(l << 16 | l2), port); + break; + case 0x01: /* Buffer 8-bit aligned */ + --count; + + l = *p << 24; + p++; + l |= *(unsigned short *)p << 8; + p += 2; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l | l2 >> 24), port); + l = l2 << 8; + } + l2 = *p; + outl (le32_to_cpu(l | l2), port); + break; + case 0x03: /* Buffer 8-bit aligned */ + --count; + + l = *p << 24; + p++; + + while (count--) + { + l2 = *(unsigned int *)p; + p += 4; + outl (le32_to_cpu(l | l2 >> 8), port); + l = l2 << 24; + } + l2 = *(unsigned short *)p << 16; + p += 2; + l2 |= *p; + outl (le32_to_cpu(l | l2), port); + break; + } +} + +EXPORT_SYMBOL(insb); +EXPORT_SYMBOL(insw); +EXPORT_SYMBOL(insl); +EXPORT_SYMBOL(outsb); +EXPORT_SYMBOL(outsw); +EXPORT_SYMBOL(outsl); diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c new file mode 100644 index 000000000000..290a62e7120b --- /dev/null +++ b/arch/parisc/lib/iomap.c @@ -0,0 +1,422 @@ +/* + * iomap.c - Implement iomap interface for PA-RISC + * Copyright (c) 2004 Matthew Wilcox + */ + +#include +#include +#include + +/* + * The iomap space on 32-bit PA-RISC is intended to look like this: + * 00000000-7fffffff virtual mapped IO + * 80000000-8fffffff ISA/EISA port space that can't be virtually mapped + * 90000000-9fffffff Dino port space + * a0000000-afffffff Astro port space + * b0000000-bfffffff PAT port space + * c0000000-cfffffff non-swapped memory IO + * f0000000-ffffffff legacy IO memory pointers + * + * For the moment, here's what it looks like: + * 80000000-8fffffff All ISA/EISA port space + * f0000000-ffffffff legacy IO memory pointers + * + * On 64-bit, everything is extended, so: + * 8000000000000000-8fffffffffffffff All ISA/EISA port space + * f000000000000000-ffffffffffffffff legacy IO memory pointers + */ + +/* + * Technically, this should be 'if (VMALLOC_START < addr < VMALLOC_END), + * but that's slow and we know it'll be within the first 2GB. + */ +#ifdef CONFIG_64BIT +#define INDIRECT_ADDR(addr) (((unsigned long)(addr) & 1UL<<63) != 0) +#define ADDR_TO_REGION(addr) (((unsigned long)addr >> 60) & 7) +#define IOPORT_MAP_BASE (8UL << 60) +#else +#define INDIRECT_ADDR(addr) (((unsigned long)(addr) & 1UL<<31) != 0) +#define ADDR_TO_REGION(addr) (((unsigned long)addr >> 28) & 7) +#define IOPORT_MAP_BASE (8UL << 28) +#endif + +struct iomap_ops { + unsigned int (*read8)(void __iomem *); + unsigned int (*read16)(void __iomem *); + unsigned int (*read32)(void __iomem *); + void (*write8)(u8, void __iomem *); + void (*write16)(u16, void __iomem *); + void (*write32)(u32, void __iomem *); + void (*read8r)(void __iomem *, void *, unsigned long); + void (*read16r)(void __iomem *, void *, unsigned long); + void (*read32r)(void __iomem *, void *, unsigned long); + void (*write8r)(void __iomem *, const void *, unsigned long); + void (*write16r)(void __iomem *, const void *, unsigned long); + void (*write32r)(void __iomem *, const void *, unsigned long); +}; + +/* Generic ioport ops. To be replaced later by specific dino/elroy/wax code */ + +#define ADDR2PORT(addr) ((unsigned long __force)(addr) & 0xffffff) + +static unsigned int ioport_read8(void __iomem *addr) +{ + return inb(ADDR2PORT(addr)); +} + +static unsigned int ioport_read16(void __iomem *addr) +{ + return inw(ADDR2PORT(addr)); +} + +static unsigned int ioport_read32(void __iomem *addr) +{ + return inl(ADDR2PORT(addr)); +} + +static void ioport_write8(u8 datum, void __iomem *addr) +{ + outb(datum, ADDR2PORT(addr)); +} + +static void ioport_write16(u16 datum, void __iomem *addr) +{ + outw(datum, ADDR2PORT(addr)); +} + +static void ioport_write32(u32 datum, void __iomem *addr) +{ + outl(datum, ADDR2PORT(addr)); +} + +static void ioport_read8r(void __iomem *addr, void *dst, unsigned long count) +{ + insb(ADDR2PORT(addr), dst, count); +} + +static void ioport_read16r(void __iomem *addr, void *dst, unsigned long count) +{ + insw(ADDR2PORT(addr), dst, count); +} + +static void ioport_read32r(void __iomem *addr, void *dst, unsigned long count) +{ + insl(ADDR2PORT(addr), dst, count); +} + +static void ioport_write8r(void __iomem *addr, const void *s, unsigned long n) +{ + outsb(ADDR2PORT(addr), s, n); +} + +static void ioport_write16r(void __iomem *addr, const void *s, unsigned long n) +{ + outsw(ADDR2PORT(addr), s, n); +} + +static void ioport_write32r(void __iomem *addr, const void *s, unsigned long n) +{ + outsl(ADDR2PORT(addr), s, n); +} + +static const struct iomap_ops ioport_ops = { + ioport_read8, + ioport_read16, + ioport_read32, + ioport_write8, + ioport_write16, + ioport_write32, + ioport_read8r, + ioport_read16r, + ioport_read32r, + ioport_write8r, + ioport_write16r, + ioport_write32r, +}; + +/* Legacy I/O memory ops */ + +static unsigned int iomem_read8(void __iomem *addr) +{ + return readb(addr); +} + +static unsigned int iomem_read16(void __iomem *addr) +{ + return readw(addr); +} + +static unsigned int iomem_read32(void __iomem *addr) +{ + return readl(addr); +} + +static void iomem_write8(u8 datum, void __iomem *addr) +{ + writeb(datum, addr); +} + +static void iomem_write16(u16 datum, void __iomem *addr) +{ + writew(datum, addr); +} + +static void iomem_write32(u32 datum, void __iomem *addr) +{ + writel(datum, addr); +} + +static void iomem_read8r(void __iomem *addr, void *dst, unsigned long count) +{ + while (count--) { + *(u8 *)dst = __raw_readb(addr); + dst++; + } +} + +static void iomem_read16r(void __iomem *addr, void *dst, unsigned long count) +{ + while (count--) { + *(u16 *)dst = __raw_readw(addr); + dst += 2; + } +} + +static void iomem_read32r(void __iomem *addr, void *dst, unsigned long count) +{ + while (count--) { + *(u32 *)dst = __raw_readl(addr); + dst += 4; + } +} + +static void iomem_write8r(void __iomem *addr, const void *s, unsigned long n) +{ + while (n--) { + __raw_writeb(*(u8 *)s, addr); + s++; + } +} + +static void iomem_write16r(void __iomem *addr, const void *s, unsigned long n) +{ + while (n--) { + __raw_writew(*(u16 *)s, addr); + s += 2; + } +} + +static void iomem_write32r(void __iomem *addr, const void *s, unsigned long n) +{ + while (n--) { + __raw_writel(*(u32 *)s, addr); + s += 4; + } +} + +static const struct iomap_ops iomem_ops = { + iomem_read8, + iomem_read16, + iomem_read32, + iomem_write8, + iomem_write16, + iomem_write32, + iomem_read8r, + iomem_read16r, + iomem_read32r, + iomem_write8r, + iomem_write16r, + iomem_write32r, +}; + +const struct iomap_ops *iomap_ops[8] = { + [0] = &ioport_ops, +#ifdef CONFIG_DEBUG_IOREMAP + [6] = &iomem_ops, +#else + [7] = &iomem_ops +#endif +}; + + +unsigned int ioread8(void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) + return iomap_ops[ADDR_TO_REGION(addr)]->read8(addr); + return *((u8 *)addr); +} + +unsigned int ioread16(void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) + return iomap_ops[ADDR_TO_REGION(addr)]->read16(addr); + return le16_to_cpup((u16 *)addr); +} + +unsigned int ioread32(void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) + return iomap_ops[ADDR_TO_REGION(addr)]->read32(addr); + return le32_to_cpup((u32 *)addr); +} + +void iowrite8(u8 datum, void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write8(datum, addr); + } else { + *((u8 *)addr) = datum; + } +} + +void iowrite16(u16 datum, void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write16(datum, addr); + } else { + *((u16 *)addr) = cpu_to_le16(datum); + } +} + +void iowrite32(u32 datum, void __iomem *addr) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write32(datum, addr); + } else { + *((u32 *)addr) = cpu_to_le32(datum); + } +} + +/* Repeating interfaces */ + +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->read8r(addr, dst, count); + } else { + while (count--) { + *(u8 *)dst = *(u8 *)addr; + dst++; + } + } +} + +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->read16r(addr, dst, count); + } else { + while (count--) { + *(u16 *)dst = *(u16 *)addr; + dst += 2; + } + } +} + +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->read32r(addr, dst, count); + } else { + while (count--) { + *(u32 *)dst = *(u32 *)addr; + dst += 4; + } + } +} + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write8r(addr, src, count); + } else { + while (count--) { + *(u8 *)addr = *(u8 *)src; + src++; + } + } +} + +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write16r(addr, src, count); + } else { + while (count--) { + *(u16 *)addr = *(u16 *)src; + src += 2; + } + } +} + +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + if (unlikely(INDIRECT_ADDR(addr))) { + iomap_ops[ADDR_TO_REGION(addr)]->write32r(addr, src, count); + } else { + while (count--) { + *(u32 *)addr = *(u32 *)src; + src += 4; + } + } +} + +/* Mapping interfaces */ + +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *)(IOPORT_MAP_BASE | port); +} + +void ioport_unmap(void __iomem *addr) +{ + if (!INDIRECT_ADDR(addr)) { + iounmap(addr); + } +} + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + return ioremap_nocache(start, len); + } + /* What? */ + return NULL; +} + +void pci_iounmap(struct pci_dev *dev, void __iomem * addr) +{ + if (!INDIRECT_ADDR(addr)) { + iounmap(addr); + } +} + +EXPORT_SYMBOL(ioread8); +EXPORT_SYMBOL(ioread16); +EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(iowrite8); +EXPORT_SYMBOL(iowrite16); +EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(ioread8_rep); +EXPORT_SYMBOL(ioread16_rep); +EXPORT_SYMBOL(ioread32_rep); +EXPORT_SYMBOL(iowrite8_rep); +EXPORT_SYMBOL(iowrite16_rep); +EXPORT_SYMBOL(iowrite32_rep); +EXPORT_SYMBOL(ioport_map); +EXPORT_SYMBOL(ioport_unmap); +EXPORT_SYMBOL(pci_iomap); +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S new file mode 100644 index 000000000000..a0509855c9a7 --- /dev/null +++ b/arch/parisc/lib/lusercopy.S @@ -0,0 +1,193 @@ +/* + * User Space Access Routines + * + * Copyright (C) 2000-2002 Hewlett-Packard (John Marvin) + * Copyright (C) 2000 Richard Hirst + * Copyright (C) 2001 Matthieu Delahaye + * Copyright (C) 2003 Randolph Chung + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * These routines still have plenty of room for optimization + * (word & doubleword load/store, dual issue, store hints, etc.). + */ + +/* + * The following routines assume that space register 3 (sr3) contains + * the space id associated with the current users address space. + */ + + + .text + +#include +#include + + /* + * get_sr gets the appropriate space value into + * sr1 for kernel/user space access, depending + * on the flag stored in the task structure. + */ + + .macro get_sr + mfctl %cr30,%r1 + ldw TI_SEGMENT(%r1),%r22 + mfsp %sr3,%r1 + or,<> %r22,%r0,%r0 + copy %r0,%r1 + mtsp %r1,%sr1 + .endm + + .macro fixup_branch lbl + ldil L%\lbl, %r1 + ldo R%\lbl(%r1), %r1 + bv %r0(%r1) + .endm + + /* + * long lstrncpy_from_user(char *dst, const char *src, long n) + * + * Returns -EFAULT if exception before terminator, + * N if the entire buffer filled, + * otherwise strlen (i.e. excludes zero byte) + */ + + .export lstrncpy_from_user,code +lstrncpy_from_user: + .proc + .callinfo NO_CALLS + .entry + comib,= 0,%r24,$lsfu_done + copy %r24,%r23 + get_sr +1: ldbs,ma 1(%sr1,%r25),%r1 +$lsfu_loop: + stbs,ma %r1,1(%r26) + comib,=,n 0,%r1,$lsfu_done + addib,<>,n -1,%r24,$lsfu_loop +2: ldbs,ma 1(%sr1,%r25),%r1 +$lsfu_done: + sub %r23,%r24,%r28 +$lsfu_exit: + bv %r0(%r2) + nop + .exit + + .section .fixup,"ax" +3: fixup_branch $lsfu_exit + ldi -EFAULT,%r28 + .previous + + .section __ex_table,"aw" +#ifdef __LP64__ + .dword 1b,3b + .dword 2b,3b +#else + .word 1b,3b + .word 2b,3b +#endif + .previous + + .procend + + /* + * unsigned long lclear_user(void *to, unsigned long n) + * + * Returns 0 for success. + * otherwise, returns number of bytes not transferred. + */ + + .export lclear_user,code +lclear_user: + .proc + .callinfo NO_CALLS + .entry + comib,=,n 0,%r25,$lclu_done + get_sr +$lclu_loop: + addib,<> -1,%r25,$lclu_loop +1: stbs,ma %r0,1(%sr1,%r26) + +$lclu_done: + bv %r0(%r2) + copy %r25,%r28 + .exit + + .section .fixup,"ax" +2: fixup_branch $lclu_done + ldo 1(%r25),%r25 + .previous + + .section __ex_table,"aw" +#ifdef __LP64__ + .dword 1b,2b +#else + .word 1b,2b +#endif + .previous + + .procend + + /* + * long lstrnlen_user(char *s, long n) + * + * Returns 0 if exception before zero byte or reaching N, + * N+1 if N would be exceeded, + * else strlen + 1 (i.e. includes zero byte). + */ + + .export lstrnlen_user,code +lstrnlen_user: + .proc + .callinfo NO_CALLS + .entry + comib,= 0,%r25,$lslen_nzero + copy %r26,%r24 + get_sr +1: ldbs,ma 1(%sr1,%r26),%r1 +$lslen_loop: + comib,=,n 0,%r1,$lslen_done + addib,<> -1,%r25,$lslen_loop +2: ldbs,ma 1(%sr1,%r26),%r1 +$lslen_done: + bv %r0(%r2) + sub %r26,%r24,%r28 + .exit + +$lslen_nzero: + b $lslen_done + ldo 1(%r26),%r26 /* special case for N == 0 */ + + .section .fixup,"ax" +3: fixup_branch $lslen_done + copy %r24,%r26 /* reset r26 so 0 is returned on fault */ + .previous + + .section __ex_table,"aw" +#ifdef __LP64__ + .dword 1b,3b + .dword 2b,3b +#else + .word 1b,3b + .word 2b,3b +#endif + .previous + + .procend + + .end diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c new file mode 100644 index 000000000000..feb1b9f42c2b --- /dev/null +++ b/arch/parisc/lib/memcpy.c @@ -0,0 +1,522 @@ +/* + * Optimized memory copy routines. + * + * Copyright (C) 2004 Randolph Chung + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Portions derived from the GNU C Library + * Copyright (C) 1991, 1997, 2003 Free Software Foundation, Inc. + * + * Several strategies are tried to try to get the best performance for various + * conditions. In the optimal case, we copy 64-bytes in an unrolled loop using + * fp regs. This is followed by loops that copy 32- or 16-bytes at a time using + * general registers. Unaligned copies are handled either by aligning the + * destination and then using shift-and-write method, or in a few cases by + * falling back to a byte-at-a-time copy. + * + * I chose to implement this in C because it is easier to maintain and debug, + * and in my experiments it appears that the C code generated by gcc (3.3/3.4 + * at the time of writing) is fairly optimal. Unfortunately some of the + * semantics of the copy routine (exception handling) is difficult to express + * in C, so we have to play some tricks to get it to work. + * + * All the loads and stores are done via explicit asm() code in order to use + * the right space registers. + * + * Testing with various alignments and buffer sizes shows that this code is + * often >10x faster than a simple byte-at-a-time copy, even for strangely + * aligned operands. It is interesting to note that the glibc version + * of memcpy (written in C) is actually quite fast already. This routine is + * able to beat it by 30-40% for aligned copies because of the loop unrolling, + * but in some cases the glibc version is still slightly faster. This lends + * more credibility that gcc can generate very good code as long as we are + * careful. + * + * TODO: + * - cache prefetching needs more experimentation to get optimal settings + * - try not to use the post-increment address modifiers; they create additional + * interlocks + * - replace byte-copy loops with stybs sequences + */ + +#ifdef __KERNEL__ +#include +#include +#include +#include +#define s_space "%%sr1" +#define d_space "%%sr2" +#else +#include "memcpy.h" +#define s_space "%%sr0" +#define d_space "%%sr0" +#define pa_memcpy new2_copy +#endif + +DECLARE_PER_CPU(struct exception_data, exception_data); + +#define preserve_branch(label) do { \ + volatile int dummy; \ + /* The following branch is never taken, it's just here to */ \ + /* prevent gcc from optimizing away our exception code. */ \ + if (unlikely(dummy != dummy)) \ + goto label; \ +} while (0) + +#define get_user_space() (segment_eq(get_fs(), KERNEL_DS) ? 0 : mfsp(3)) +#define get_kernel_space() (0) + +#define MERGE(w0, sh_1, w1, sh_2) ({ \ + unsigned int _r; \ + asm volatile ( \ + "mtsar %3\n" \ + "shrpw %1, %2, %%sar, %0\n" \ + : "=r"(_r) \ + : "r"(w0), "r"(w1), "r"(sh_2) \ + ); \ + _r; \ +}) +#define THRESHOLD 16 + +#ifdef DEBUG_MEMCPY +#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0) +#else +#define DPRINTF(fmt, args...) +#endif + +#ifndef __LP64__ +#define EXC_WORD ".word" +#else +#define EXC_WORD ".dword" +#endif + +#define def_load_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e) \ + __asm__ __volatile__ ( \ + "1:\t" #_insn ",ma " #_sz "(" _s ",%1), %0\n" \ + "\t.section __ex_table,\"aw\"\n" \ + "\t" EXC_WORD "\t1b\n" \ + "\t" EXC_WORD "\t" #_e "\n" \ + "\t.previous\n" \ + : _tt(_t), "+r"(_a) \ + : \ + : "r8") + +#define def_store_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e) \ + __asm__ __volatile__ ( \ + "1:\t" #_insn ",ma %1, " #_sz "(" _s ",%0)\n" \ + "\t.section __ex_table,\"aw\"\n" \ + "\t" EXC_WORD "\t1b\n" \ + "\t" EXC_WORD "\t" #_e "\n" \ + "\t.previous\n" \ + : "+r"(_a) \ + : _tt(_t) \ + : "r8") + +#define ldbma(_s, _a, _t, _e) def_load_ai_insn(ldbs,1,"=r",_s,_a,_t,_e) +#define stbma(_s, _t, _a, _e) def_store_ai_insn(stbs,1,"r",_s,_a,_t,_e) +#define ldwma(_s, _a, _t, _e) def_load_ai_insn(ldw,4,"=r",_s,_a,_t,_e) +#define stwma(_s, _t, _a, _e) def_store_ai_insn(stw,4,"r",_s,_a,_t,_e) +#define flddma(_s, _a, _t, _e) def_load_ai_insn(fldd,8,"=f",_s,_a,_t,_e) +#define fstdma(_s, _t, _a, _e) def_store_ai_insn(fstd,8,"f",_s,_a,_t,_e) + +#define def_load_insn(_insn,_tt,_s,_o,_a,_t,_e) \ + __asm__ __volatile__ ( \ + "1:\t" #_insn " " #_o "(" _s ",%1), %0\n" \ + "\t.section __ex_table,\"aw\"\n" \ + "\t" EXC_WORD "\t1b\n" \ + "\t" EXC_WORD "\t" #_e "\n" \ + "\t.previous\n" \ + : _tt(_t) \ + : "r"(_a) \ + : "r8") + +#define def_store_insn(_insn,_tt,_s,_t,_o,_a,_e) \ + __asm__ __volatile__ ( \ + "1:\t" #_insn " %0, " #_o "(" _s ",%1)\n" \ + "\t.section __ex_table,\"aw\"\n" \ + "\t" EXC_WORD "\t1b\n" \ + "\t" EXC_WORD "\t" #_e "\n" \ + "\t.previous\n" \ + : \ + : _tt(_t), "r"(_a) \ + : "r8") + +#define ldw(_s,_o,_a,_t,_e) def_load_insn(ldw,"=r",_s,_o,_a,_t,_e) +#define stw(_s,_t,_o,_a,_e) def_store_insn(stw,"r",_s,_t,_o,_a,_e) + +#ifdef CONFIG_PREFETCH +extern inline void prefetch_src(const void *addr) +{ + __asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr)); +} + +extern inline void prefetch_dst(const void *addr) +{ + __asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr)); +} +#else +#define prefetch_src(addr) +#define prefetch_dst(addr) +#endif + +/* Copy from a not-aligned src to an aligned dst, using shifts. Handles 4 words + * per loop. This code is derived from glibc. + */ +static inline unsigned long copy_dstaligned(unsigned long dst, unsigned long src, unsigned long len, unsigned long o_dst, unsigned long o_src, unsigned long o_len) +{ + /* gcc complains that a2 and a3 may be uninitialized, but actually + * they cannot be. Initialize a2/a3 to shut gcc up. + */ + register unsigned int a0, a1, a2 = 0, a3 = 0; + int sh_1, sh_2; + struct exception_data *d; + + /* prefetch_src((const void *)src); */ + + /* Calculate how to shift a word read at the memory operation + aligned srcp to make it aligned for copy. */ + sh_1 = 8 * (src % sizeof(unsigned int)); + sh_2 = 8 * sizeof(unsigned int) - sh_1; + + /* Make src aligned by rounding it down. */ + src &= -sizeof(unsigned int); + + switch (len % 4) + { + case 2: + /* a1 = ((unsigned int *) src)[0]; + a2 = ((unsigned int *) src)[1]; */ + ldw(s_space, 0, src, a1, cda_ldw_exc); + ldw(s_space, 4, src, a2, cda_ldw_exc); + src -= 1 * sizeof(unsigned int); + dst -= 3 * sizeof(unsigned int); + len += 2; + goto do1; + case 3: + /* a0 = ((unsigned int *) src)[0]; + a1 = ((unsigned int *) src)[1]; */ + ldw(s_space, 0, src, a0, cda_ldw_exc); + ldw(s_space, 4, src, a1, cda_ldw_exc); + src -= 0 * sizeof(unsigned int); + dst -= 2 * sizeof(unsigned int); + len += 1; + goto do2; + case 0: + if (len == 0) + return 0; + /* a3 = ((unsigned int *) src)[0]; + a0 = ((unsigned int *) src)[1]; */ + ldw(s_space, 0, src, a3, cda_ldw_exc); + ldw(s_space, 4, src, a0, cda_ldw_exc); + src -=-1 * sizeof(unsigned int); + dst -= 1 * sizeof(unsigned int); + len += 0; + goto do3; + case 1: + /* a2 = ((unsigned int *) src)[0]; + a3 = ((unsigned int *) src)[1]; */ + ldw(s_space, 0, src, a2, cda_ldw_exc); + ldw(s_space, 4, src, a3, cda_ldw_exc); + src -=-2 * sizeof(unsigned int); + dst -= 0 * sizeof(unsigned int); + len -= 1; + if (len == 0) + goto do0; + goto do4; /* No-op. */ + } + + do + { + /* prefetch_src((const void *)(src + 4 * sizeof(unsigned int))); */ +do4: + /* a0 = ((unsigned int *) src)[0]; */ + ldw(s_space, 0, src, a0, cda_ldw_exc); + /* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */ + stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc); +do3: + /* a1 = ((unsigned int *) src)[1]; */ + ldw(s_space, 4, src, a1, cda_ldw_exc); + /* ((unsigned int *) dst)[1] = MERGE (a3, sh_1, a0, sh_2); */ + stw(d_space, MERGE (a3, sh_1, a0, sh_2), 4, dst, cda_stw_exc); +do2: + /* a2 = ((unsigned int *) src)[2]; */ + ldw(s_space, 8, src, a2, cda_ldw_exc); + /* ((unsigned int *) dst)[2] = MERGE (a0, sh_1, a1, sh_2); */ + stw(d_space, MERGE (a0, sh_1, a1, sh_2), 8, dst, cda_stw_exc); +do1: + /* a3 = ((unsigned int *) src)[3]; */ + ldw(s_space, 12, src, a3, cda_ldw_exc); + /* ((unsigned int *) dst)[3] = MERGE (a1, sh_1, a2, sh_2); */ + stw(d_space, MERGE (a1, sh_1, a2, sh_2), 12, dst, cda_stw_exc); + + src += 4 * sizeof(unsigned int); + dst += 4 * sizeof(unsigned int); + len -= 4; + } + while (len != 0); + +do0: + /* ((unsigned int *) dst)[0] = MERGE (a2, sh_1, a3, sh_2); */ + stw(d_space, MERGE (a2, sh_1, a3, sh_2), 0, dst, cda_stw_exc); + + preserve_branch(handle_load_error); + preserve_branch(handle_store_error); + + return 0; + +handle_load_error: + __asm__ __volatile__ ("cda_ldw_exc:\n"); + d = &__get_cpu_var(exception_data); + DPRINTF("cda_ldw_exc: o_len=%lu fault_addr=%lu o_src=%lu ret=%lu\n", + o_len, d->fault_addr, o_src, o_len - d->fault_addr + o_src); + return o_len * 4 - d->fault_addr + o_src; + +handle_store_error: + __asm__ __volatile__ ("cda_stw_exc:\n"); + d = &__get_cpu_var(exception_data); + DPRINTF("cda_stw_exc: o_len=%lu fault_addr=%lu o_dst=%lu ret=%lu\n", + o_len, d->fault_addr, o_dst, o_len - d->fault_addr + o_dst); + return o_len * 4 - d->fault_addr + o_dst; +} + + +/* Returns 0 for success, otherwise, returns number of bytes not transferred. */ +unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) +{ + register unsigned long src, dst, t1, t2, t3; + register unsigned char *pcs, *pcd; + register unsigned int *pws, *pwd; + register double *pds, *pdd; + unsigned long ret = 0; + unsigned long o_dst, o_src, o_len; + struct exception_data *d; + + src = (unsigned long)srcp; + dst = (unsigned long)dstp; + pcs = (unsigned char *)srcp; + pcd = (unsigned char *)dstp; + + o_dst = dst; o_src = src; o_len = len; + + /* prefetch_src((const void *)srcp); */ + + if (len < THRESHOLD) + goto byte_copy; + + /* Check alignment */ + t1 = (src ^ dst); + if (unlikely(t1 & (sizeof(double)-1))) + goto unaligned_copy; + + /* src and dst have same alignment. */ + + /* Copy bytes till we are double-aligned. */ + t2 = src & (sizeof(double) - 1); + if (unlikely(t2 != 0)) { + t2 = sizeof(double) - t2; + while (t2 && len) { + /* *pcd++ = *pcs++; */ + ldbma(s_space, pcs, t3, pmc_load_exc); + len--; + stbma(d_space, t3, pcd, pmc_store_exc); + t2--; + } + } + + pds = (double *)pcs; + pdd = (double *)pcd; + + /* Copy 8 doubles at a time */ + while (len >= 8*sizeof(double)) { + register double r1, r2, r3, r4, r5, r6, r7, r8; + /* prefetch_src((char *)pds + L1_CACHE_BYTES); */ + flddma(s_space, pds, r1, pmc_load_exc); + flddma(s_space, pds, r2, pmc_load_exc); + flddma(s_space, pds, r3, pmc_load_exc); + flddma(s_space, pds, r4, pmc_load_exc); + fstdma(d_space, r1, pdd, pmc_store_exc); + fstdma(d_space, r2, pdd, pmc_store_exc); + fstdma(d_space, r3, pdd, pmc_store_exc); + fstdma(d_space, r4, pdd, pmc_store_exc); + +#if 0 + if (L1_CACHE_BYTES <= 32) + prefetch_src((char *)pds + L1_CACHE_BYTES); +#endif + flddma(s_space, pds, r5, pmc_load_exc); + flddma(s_space, pds, r6, pmc_load_exc); + flddma(s_space, pds, r7, pmc_load_exc); + flddma(s_space, pds, r8, pmc_load_exc); + fstdma(d_space, r5, pdd, pmc_store_exc); + fstdma(d_space, r6, pdd, pmc_store_exc); + fstdma(d_space, r7, pdd, pmc_store_exc); + fstdma(d_space, r8, pdd, pmc_store_exc); + len -= 8*sizeof(double); + } + + pws = (unsigned int *)pds; + pwd = (unsigned int *)pdd; + +word_copy: + while (len >= 8*sizeof(unsigned int)) { + register unsigned int r1,r2,r3,r4,r5,r6,r7,r8; + /* prefetch_src((char *)pws + L1_CACHE_BYTES); */ + ldwma(s_space, pws, r1, pmc_load_exc); + ldwma(s_space, pws, r2, pmc_load_exc); + ldwma(s_space, pws, r3, pmc_load_exc); + ldwma(s_space, pws, r4, pmc_load_exc); + stwma(d_space, r1, pwd, pmc_store_exc); + stwma(d_space, r2, pwd, pmc_store_exc); + stwma(d_space, r3, pwd, pmc_store_exc); + stwma(d_space, r4, pwd, pmc_store_exc); + + ldwma(s_space, pws, r5, pmc_load_exc); + ldwma(s_space, pws, r6, pmc_load_exc); + ldwma(s_space, pws, r7, pmc_load_exc); + ldwma(s_space, pws, r8, pmc_load_exc); + stwma(d_space, r5, pwd, pmc_store_exc); + stwma(d_space, r6, pwd, pmc_store_exc); + stwma(d_space, r7, pwd, pmc_store_exc); + stwma(d_space, r8, pwd, pmc_store_exc); + len -= 8*sizeof(unsigned int); + } + + while (len >= 4*sizeof(unsigned int)) { + register unsigned int r1,r2,r3,r4; + ldwma(s_space, pws, r1, pmc_load_exc); + ldwma(s_space, pws, r2, pmc_load_exc); + ldwma(s_space, pws, r3, pmc_load_exc); + ldwma(s_space, pws, r4, pmc_load_exc); + stwma(d_space, r1, pwd, pmc_store_exc); + stwma(d_space, r2, pwd, pmc_store_exc); + stwma(d_space, r3, pwd, pmc_store_exc); + stwma(d_space, r4, pwd, pmc_store_exc); + len -= 4*sizeof(unsigned int); + } + + pcs = (unsigned char *)pws; + pcd = (unsigned char *)pwd; + +byte_copy: + while (len) { + /* *pcd++ = *pcs++; */ + ldbma(s_space, pcs, t3, pmc_load_exc); + stbma(d_space, t3, pcd, pmc_store_exc); + len--; + } + + return 0; + +unaligned_copy: + /* possibly we are aligned on a word, but not on a double... */ + if (likely(t1 & (sizeof(unsigned int)-1)) == 0) { + t2 = src & (sizeof(unsigned int) - 1); + + if (unlikely(t2 != 0)) { + t2 = sizeof(unsigned int) - t2; + while (t2) { + /* *pcd++ = *pcs++; */ + ldbma(s_space, pcs, t3, pmc_load_exc); + stbma(d_space, t3, pcd, pmc_store_exc); + len--; + t2--; + } + } + + pws = (unsigned int *)pcs; + pwd = (unsigned int *)pcd; + goto word_copy; + } + + /* Align the destination. */ + if (unlikely((dst & (sizeof(unsigned int) - 1)) != 0)) { + t2 = sizeof(unsigned int) - (dst & (sizeof(unsigned int) - 1)); + while (t2) { + /* *pcd++ = *pcs++; */ + ldbma(s_space, pcs, t3, pmc_load_exc); + stbma(d_space, t3, pcd, pmc_store_exc); + len--; + t2--; + } + dst = (unsigned long)pcd; + src = (unsigned long)pcs; + } + + ret = copy_dstaligned(dst, src, len / sizeof(unsigned int), + o_dst, o_src, o_len); + if (ret) + return ret; + + pcs += (len & -sizeof(unsigned int)); + pcd += (len & -sizeof(unsigned int)); + len %= sizeof(unsigned int); + + preserve_branch(handle_load_error); + preserve_branch(handle_store_error); + + goto byte_copy; + +handle_load_error: + __asm__ __volatile__ ("pmc_load_exc:\n"); + d = &__get_cpu_var(exception_data); + DPRINTF("pmc_load_exc: o_len=%lu fault_addr=%lu o_src=%lu ret=%lu\n", + o_len, d->fault_addr, o_src, o_len - d->fault_addr + o_src); + return o_len - d->fault_addr + o_src; + +handle_store_error: + __asm__ __volatile__ ("pmc_store_exc:\n"); + d = &__get_cpu_var(exception_data); + DPRINTF("pmc_store_exc: o_len=%lu fault_addr=%lu o_dst=%lu ret=%lu\n", + o_len, d->fault_addr, o_dst, o_len - d->fault_addr + o_dst); + return o_len - d->fault_addr + o_dst; +} + +#ifdef __KERNEL__ +unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len) +{ + mtsp(get_kernel_space(), 1); + mtsp(get_user_space(), 2); + return pa_memcpy((void __force *)dst, src, len); +} + +unsigned long copy_from_user(void *dst, const void __user *src, unsigned long len) +{ + mtsp(get_user_space(), 1); + mtsp(get_kernel_space(), 2); + return pa_memcpy(dst, (void __force *)src, len); +} + +unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len) +{ + mtsp(get_user_space(), 1); + mtsp(get_user_space(), 2); + return pa_memcpy((void __force *)dst, (void __force *)src, len); +} + + +void * memcpy(void * dst,const void *src, size_t count) +{ + mtsp(get_kernel_space(), 1); + mtsp(get_kernel_space(), 2); + pa_memcpy(dst, src, count); + return dst; +} + +EXPORT_SYMBOL(copy_to_user); +EXPORT_SYMBOL(copy_from_user); +EXPORT_SYMBOL(copy_in_user); +EXPORT_SYMBOL(memcpy); +#endif diff --git a/arch/parisc/lib/memset.c b/arch/parisc/lib/memset.c new file mode 100644 index 000000000000..1d7929bd7642 --- /dev/null +++ b/arch/parisc/lib/memset.c @@ -0,0 +1,91 @@ +/* Copyright (C) 1991, 1997 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Slight modifications for pa-risc linux - Paul Bame */ + +#include +#include + +#define OPSIZ (BITS_PER_LONG/8) +typedef unsigned long op_t; + +void * +memset (void *dstpp, int sc, size_t len) +{ + unsigned int c = sc; + long int dstp = (long int) dstpp; + + if (len >= 8) + { + size_t xlen; + op_t cccc; + + cccc = (unsigned char) c; + cccc |= cccc << 8; + cccc |= cccc << 16; + if (OPSIZ > 4) + /* Do the shift in two steps to avoid warning if long has 32 bits. */ + cccc |= (cccc << 16) << 16; + + /* There are at least some bytes to set. + No need to test for LEN == 0 in this alignment loop. */ + while (dstp % OPSIZ != 0) + { + ((unsigned char *) dstp)[0] = c; + dstp += 1; + len -= 1; + } + + /* Write 8 `op_t' per iteration until less than 8 `op_t' remain. */ + xlen = len / (OPSIZ * 8); + while (xlen > 0) + { + ((op_t *) dstp)[0] = cccc; + ((op_t *) dstp)[1] = cccc; + ((op_t *) dstp)[2] = cccc; + ((op_t *) dstp)[3] = cccc; + ((op_t *) dstp)[4] = cccc; + ((op_t *) dstp)[5] = cccc; + ((op_t *) dstp)[6] = cccc; + ((op_t *) dstp)[7] = cccc; + dstp += 8 * OPSIZ; + xlen -= 1; + } + len %= OPSIZ * 8; + + /* Write 1 `op_t' per iteration until less than OPSIZ bytes remain. */ + xlen = len / OPSIZ; + while (xlen > 0) + { + ((op_t *) dstp)[0] = cccc; + dstp += OPSIZ; + xlen -= 1; + } + len %= OPSIZ; + } + + /* Write the last few bytes. */ + while (len > 0) + { + ((unsigned char *) dstp)[0] = c; + dstp += 1; + len -= 1; + } + + return dstpp; +} diff --git a/arch/parisc/math-emu/Makefile b/arch/parisc/math-emu/Makefile new file mode 100644 index 000000000000..affd4c80e3b7 --- /dev/null +++ b/arch/parisc/math-emu/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the linux/parisc floating point code +# + +# See arch/parisc/math-emu/README +CFLAGS += -Wno-parentheses -Wno-implicit-function-declaration \ + -Wno-uninitialized -Wno-strict-prototypes -Wno-return-type \ + -Wno-implicit-int + +obj-y := frnd.o driver.o decode_exc.o fpudispatch.o denormal.o \ + dfmpy.o sfmpy.o sfsqrt.o dfsqrt.o dfadd.o fmpyfadd.o \ + sfadd.o dfsub.o sfsub.o fcnvfxt.o fcnvff.o fcnvxf.o \ + fcnvfx.o fcnvuf.o fcnvfu.o fcnvfut.o dfdiv.o sfdiv.o \ + dfrem.o sfrem.o dfcmp.o sfcmp.o + +# Math emulation code beyond the FRND is required for 712/80i and +# other very old or stripped-down PA-RISC CPUs -- not currently supported + +obj-$(CONFIG_MATH_EMULATION) += unimplemented-math-emulation.o diff --git a/arch/parisc/math-emu/README b/arch/parisc/math-emu/README new file mode 100644 index 000000000000..1a0124ef02f2 --- /dev/null +++ b/arch/parisc/math-emu/README @@ -0,0 +1,11 @@ +All files except driver.c are snapshots from the HP-UX kernel. They've +been modified as little as possible. Even though they don't fit the +Linux coding style, please leave them in their funny format just in case +someone in the future, with access to HP-UX source code, is generous +enough to update our copies with later changes from HP-UX -- it'll +make their 'diff' job easier if our code is relatively unmodified. + +Required Disclaimer: Hewlett-Packard makes no implied or expressed +warranties about this code nor any promises to maintain or test it +in any way. This copy of this snapshot is no longer the property +of Hewlett-Packard. diff --git a/arch/parisc/math-emu/cnv_float.h b/arch/parisc/math-emu/cnv_float.h new file mode 100644 index 000000000000..9071e093164a --- /dev/null +++ b/arch/parisc/math-emu/cnv_float.h @@ -0,0 +1,377 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + +/* + * Some more constants + */ +#define SGL_FX_MAX_EXP 30 +#define DBL_FX_MAX_EXP 62 +#define QUAD_FX_MAX_EXP 126 + +#define Dintp1(object) (object) +#define Dintp2(object) (object) + +#define Duintp1(object) (object) +#define Duintp2(object) (object) + +#define Qintp0(object) (object) +#define Qintp1(object) (object) +#define Qintp2(object) (object) +#define Qintp3(object) (object) + + +/* + * These macros will be used specifically by the convert instructions. + * + * + * Single format macros + */ + +#define Sgl_to_dbl_exponent(src_exponent,dest) \ + Deposit_dexponent(dest,src_exponent+(DBL_BIAS-SGL_BIAS)) + +#define Sgl_to_dbl_mantissa(src_mantissa,destA,destB) \ + Deposit_dmantissap1(destA,src_mantissa>>3); \ + Dmantissap2(destB) = src_mantissa << 29 + +#define Sgl_isinexact_to_fix(sgl_value,exponent) \ + ((exponent < (SGL_P - 1)) ? \ + (Sall(sgl_value) << (SGL_EXP_LENGTH + 1 + exponent)) : FALSE) + +#define Int_isinexact_to_sgl(int_value) (int_value << 33 - SGL_EXP_LENGTH) + +#define Sgl_roundnearest_from_int(int_value,sgl_value) \ + if (int_value & 1<<(SGL_EXP_LENGTH - 2)) /* round bit */ \ + if ((int_value << 34 - SGL_EXP_LENGTH) || Slow(sgl_value)) \ + Sall(sgl_value)++ + +#define Dint_isinexact_to_sgl(dint_valueA,dint_valueB) \ + ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB)) + +#define Sgl_roundnearest_from_dint(dint_valueA,dint_valueB,sgl_value) \ + if (Dintp1(dint_valueA) & 1<<(SGL_EXP_LENGTH - 2)) \ + if ((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) || \ + Dintp2(dint_valueB) || Slow(sgl_value)) Sall(sgl_value)++ + +#define Dint_isinexact_to_dbl(dint_value) \ + (Dintp2(dint_value) << 33 - DBL_EXP_LENGTH) + +#define Dbl_roundnearest_from_dint(dint_opndB,dbl_opndA,dbl_opndB) \ + if (Dintp2(dint_opndB) & 1<<(DBL_EXP_LENGTH - 2)) \ + if ((Dintp2(dint_opndB) << 34 - DBL_EXP_LENGTH) || Dlowp2(dbl_opndB)) \ + if ((++Dallp2(dbl_opndB))==0) Dallp1(dbl_opndA)++ + +#define Sgl_isone_roundbit(sgl_value,exponent) \ + ((Sall(sgl_value) << (SGL_EXP_LENGTH + 1 + exponent)) >> 31) + +#define Sgl_isone_stickybit(sgl_value,exponent) \ + (exponent < (SGL_P - 2) ? \ + Sall(sgl_value) << (SGL_EXP_LENGTH + 2 + exponent) : FALSE) + + +/* + * Double format macros + */ + +#define Dbl_to_sgl_exponent(src_exponent,dest) \ + dest = src_exponent + (SGL_BIAS - DBL_BIAS) + +#define Dbl_to_sgl_mantissa(srcA,srcB,dest,inexact,guard,sticky,odd) \ + Shiftdouble(Dmantissap1(srcA),Dmantissap2(srcB),29,dest); \ + guard = Dbit3p2(srcB); \ + sticky = Dallp2(srcB)<<4; \ + inexact = guard | sticky; \ + odd = Dbit2p2(srcB) + +#define Dbl_to_sgl_denormalized(srcA,srcB,exp,dest,inexact,guard,sticky,odd,tiny) \ + Deposit_dexponent(srcA,1); \ + tiny = TRUE; \ + if (exp >= -2) { \ + if (exp == 0) { \ + inexact = Dallp2(srcB) << 3; \ + guard = inexact >> 31; \ + sticky = inexact << 1; \ + Shiftdouble(Dmantissap1(srcA),Dmantissap2(srcB),29,dest); \ + odd = dest << 31; \ + if (inexact) { \ + switch(Rounding_mode()) { \ + case ROUNDPLUS: \ + if (Dbl_iszero_sign(srcA)) { \ + dest++; \ + if (Sgl_isone_hidden(dest)) \ + tiny = FALSE; \ + dest--; \ + } \ + break; \ + case ROUNDMINUS: \ + if (Dbl_isone_sign(srcA)) { \ + dest++; \ + if (Sgl_isone_hidden(dest)) \ + tiny = FALSE; \ + dest--; \ + } \ + break; \ + case ROUNDNEAREST: \ + if (guard && (sticky || odd)) { \ + dest++; \ + if (Sgl_isone_hidden(dest)) \ + tiny = FALSE; \ + dest--; \ + } \ + break; \ + } \ + } \ + /* shift right by one to get correct result */ \ + guard = odd; \ + sticky = inexact; \ + inexact |= guard; \ + dest >>= 1; \ + Deposit_dsign(srcA,0); \ + Shiftdouble(Dallp1(srcA),Dallp2(srcB),30,dest); \ + odd = dest << 31; \ + } \ + else { \ + inexact = Dallp2(srcB) << (2 + exp); \ + guard = inexact >> 31; \ + sticky = inexact << 1; \ + Deposit_dsign(srcA,0); \ + if (exp == -2) dest = Dallp1(srcA); \ + else Variable_shift_double(Dallp1(srcA),Dallp2(srcB),30-exp,dest); \ + odd = dest << 31; \ + } \ + } \ + else { \ + Deposit_dsign(srcA,0); \ + if (exp > (1 - SGL_P)) { \ + dest = Dallp1(srcA) >> (- 2 - exp); \ + inexact = Dallp1(srcA) << (34 + exp); \ + guard = inexact >> 31; \ + sticky = (inexact << 1) | Dallp2(srcB); \ + inexact |= Dallp2(srcB); \ + odd = dest << 31; \ + } \ + else { \ + dest = 0; \ + inexact = Dallp1(srcA) | Dallp2(srcB); \ + if (exp == (1 - SGL_P)) { \ + guard = Dhidden(srcA); \ + sticky = Dmantissap1(srcA) | Dallp2(srcB); \ + } \ + else { \ + guard = 0; \ + sticky = inexact; \ + } \ + odd = 0; \ + } \ + } \ + exp = 0 + +#define Dbl_isinexact_to_fix(dbl_valueA,dbl_valueB,exponent) \ + (exponent < (DBL_P-33) ? \ + Dallp2(dbl_valueB) || Dallp1(dbl_valueA) << (DBL_EXP_LENGTH+1+exponent) : \ + (exponent < (DBL_P-1) ? Dallp2(dbl_valueB) << (exponent + (33-DBL_P)) : \ + FALSE)) + +#define Dbl_isoverflow_to_int(exponent,dbl_valueA,dbl_valueB) \ + ((exponent > SGL_FX_MAX_EXP + 1) || Dsign(dbl_valueA)==0 || \ + Dmantissap1(dbl_valueA)!=0 || (Dallp2(dbl_valueB)>>21)!=0 ) + +#define Dbl_isone_roundbit(dbl_valueA,dbl_valueB,exponent) \ + ((exponent < (DBL_P - 33) ? \ + Dallp1(dbl_valueA) >> ((30 - DBL_EXP_LENGTH) - exponent) : \ + Dallp2(dbl_valueB) >> ((DBL_P - 2) - exponent)) & 1) + +#define Dbl_isone_stickybit(dbl_valueA,dbl_valueB,exponent) \ + (exponent < (DBL_P-34) ? \ + (Dallp2(dbl_valueB) || Dallp1(dbl_valueA)<<(DBL_EXP_LENGTH+2+exponent)) : \ + (exponent<(DBL_P-2) ? (Dallp2(dbl_valueB) << (exponent + (34-DBL_P))) : \ + FALSE)) + + +/* Int macros */ + +#define Int_from_sgl_mantissa(sgl_value,exponent) \ + Sall(sgl_value) = \ + (unsigned)(Sall(sgl_value) << SGL_EXP_LENGTH)>>(31 - exponent) + +#define Int_from_dbl_mantissa(dbl_valueA,dbl_valueB,exponent) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),22,Dallp1(dbl_valueA)); \ + if (exponent < 31) Dallp1(dbl_valueA) >>= 30 - exponent; \ + else Dallp1(dbl_valueA) <<= 1 + +#define Int_negate(int_value) int_value = -int_value + + +/* Dint macros */ + +#define Dint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \ + {Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \ + if (exponent <= 31) { \ + Dintp1(dresultA) = 0; \ + Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \ + } \ + else { \ + Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \ + Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \ + }} + + +#define Dint_from_dbl_mantissa(dbl_valueA,dbl_valueB,exponent,destA,destB) \ + {if (exponent < 32) { \ + Dintp1(destA) = 0; \ + if (exponent <= 20) \ + Dintp2(destB) = Dallp1(dbl_valueA) >> 20-exponent; \ + else Variable_shift_double(Dallp1(dbl_valueA),Dallp2(dbl_valueB), \ + 52-exponent,Dintp2(destB)); \ + } \ + else { \ + if (exponent <= 52) { \ + Dintp1(destA) = Dallp1(dbl_valueA) >> 52-exponent; \ + if (exponent == 52) Dintp2(destB) = Dallp2(dbl_valueB); \ + else Variable_shift_double(Dallp1(dbl_valueA),Dallp2(dbl_valueB), \ + 52-exponent,Dintp2(destB)); \ + } \ + else { \ + Variable_shift_double(Dallp1(dbl_valueA),Dallp2(dbl_valueB), \ + 84-exponent,Dintp1(destA)); \ + Dintp2(destB) = Dallp2(dbl_valueB) << exponent-52; \ + } \ + }} + +#define Dint_setzero(dresultA,dresultB) \ + Dintp1(dresultA) = 0; \ + Dintp2(dresultB) = 0 + +#define Dint_setone_sign(dresultA,dresultB) \ + Dintp1(dresultA) = ~Dintp1(dresultA); \ + if ((Dintp2(dresultB) = -Dintp2(dresultB)) == 0) Dintp1(dresultA)++ + +#define Dint_set_minint(dresultA,dresultB) \ + Dintp1(dresultA) = (unsigned int)1<<31; \ + Dintp2(dresultB) = 0 + +#define Dint_isone_lowp2(dresultB) (Dintp2(dresultB) & 01) + +#define Dint_increment(dresultA,dresultB) \ + if ((++Dintp2(dresultB))==0) Dintp1(dresultA)++ + +#define Dint_decrement(dresultA,dresultB) \ + if ((Dintp2(dresultB)--)==0) Dintp1(dresultA)-- + +#define Dint_negate(dresultA,dresultB) \ + Dintp1(dresultA) = ~Dintp1(dresultA); \ + if ((Dintp2(dresultB) = -Dintp2(dresultB))==0) Dintp1(dresultA)++ + +#define Dint_copyfromptr(src,destA,destB) \ + Dintp1(destA) = src->wd0; \ + Dintp2(destB) = src->wd1 +#define Dint_copytoptr(srcA,srcB,dest) \ + dest->wd0 = Dintp1(srcA); \ + dest->wd1 = Dintp2(srcB) + + +/* other macros */ + +#define Find_ms_one_bit(value, position) \ + { \ + int var; \ + for (var=8; var >=1; var >>= 1) { \ + if (value >> 32 - position) \ + position -= var; \ + else position += var; \ + } \ + if ((value >> 32 - position) == 0) \ + position--; \ + else position -= 2; \ + } + + +/* + * Unsigned int macros + */ +#define Duint_copyfromptr(src,destA,destB) \ + Dint_copyfromptr(src,destA,destB) +#define Duint_copytoptr(srcA,srcB,dest) \ + Dint_copytoptr(srcA,srcB,dest) + +#define Suint_isinexact_to_sgl(int_value) \ + (int_value << 32 - SGL_EXP_LENGTH) + +#define Sgl_roundnearest_from_suint(suint_value,sgl_value) \ + if (suint_value & 1<<(SGL_EXP_LENGTH - 1)) /* round bit */ \ + if ((suint_value << 33 - SGL_EXP_LENGTH) || Slow(sgl_value)) \ + Sall(sgl_value)++ + +#define Duint_isinexact_to_sgl(duint_valueA,duint_valueB) \ + ((Duintp1(duint_valueA) << 32 - SGL_EXP_LENGTH) || Duintp2(duint_valueB)) + +#define Sgl_roundnearest_from_duint(duint_valueA,duint_valueB,sgl_value) \ + if (Duintp1(duint_valueA) & 1<<(SGL_EXP_LENGTH - 1)) \ + if ((Duintp1(duint_valueA) << 33 - SGL_EXP_LENGTH) || \ + Duintp2(duint_valueB) || Slow(sgl_value)) Sall(sgl_value)++ + +#define Duint_isinexact_to_dbl(duint_value) \ + (Duintp2(duint_value) << 32 - DBL_EXP_LENGTH) + +#define Dbl_roundnearest_from_duint(duint_opndB,dbl_opndA,dbl_opndB) \ + if (Duintp2(duint_opndB) & 1<<(DBL_EXP_LENGTH - 1)) \ + if ((Duintp2(duint_opndB) << 33 - DBL_EXP_LENGTH) || Dlowp2(dbl_opndB)) \ + if ((++Dallp2(dbl_opndB))==0) Dallp1(dbl_opndA)++ + +#define Suint_from_sgl_mantissa(src,exponent,result) \ + Sall(result) = (unsigned)(Sall(src) << SGL_EXP_LENGTH)>>(31 - exponent) + +#define Sgl_isinexact_to_unsigned(sgl_value,exponent) \ + Sgl_isinexact_to_fix(sgl_value,exponent) + +#define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB) \ + {Sall(sgl_value) <<= SGL_EXP_LENGTH; /* left-justify */ \ + if (exponent <= 31) { \ + Dintp1(dresultA) = 0; \ + Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \ + } \ + else { \ + Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent); \ + Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31); \ + } \ + Sall(sgl_value) >>= SGL_EXP_LENGTH; /* return to original */ \ + } + +#define Duint_setzero(dresultA,dresultB) \ + Dint_setzero(dresultA,dresultB) + +#define Duint_increment(dresultA,dresultB) Dint_increment(dresultA,dresultB) + +#define Duint_isone_lowp2(dresultB) Dint_isone_lowp2(dresultB) + +#define Suint_from_dbl_mantissa(srcA,srcB,exponent,dest) \ + Shiftdouble(Dallp1(srcA),Dallp2(srcB),21,dest); \ + dest = (unsigned)dest >> 31 - exponent + +#define Dbl_isinexact_to_unsigned(dbl_valueA,dbl_valueB,exponent) \ + Dbl_isinexact_to_fix(dbl_valueA,dbl_valueB,exponent) + +#define Duint_from_dbl_mantissa(dbl_valueA,dbl_valueB,exponent,destA,destB) \ + Dint_from_dbl_mantissa(dbl_valueA,dbl_valueB,exponent,destA,destB) diff --git a/arch/parisc/math-emu/dbl_float.h b/arch/parisc/math-emu/dbl_float.h new file mode 100644 index 000000000000..1570e2e0a327 --- /dev/null +++ b/arch/parisc/math-emu/dbl_float.h @@ -0,0 +1,847 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + +/* 32-bit word grabing functions */ +#define Dbl_firstword(value) Dallp1(value) +#define Dbl_secondword(value) Dallp2(value) +#define Dbl_thirdword(value) dummy_location +#define Dbl_fourthword(value) dummy_location + +#define Dbl_sign(object) Dsign(object) +#define Dbl_exponent(object) Dexponent(object) +#define Dbl_signexponent(object) Dsignexponent(object) +#define Dbl_mantissap1(object) Dmantissap1(object) +#define Dbl_mantissap2(object) Dmantissap2(object) +#define Dbl_exponentmantissap1(object) Dexponentmantissap1(object) +#define Dbl_allp1(object) Dallp1(object) +#define Dbl_allp2(object) Dallp2(object) + +/* dbl_and_signs ands the sign bits of each argument and puts the result + * into the first argument. dbl_or_signs ors those same sign bits */ +#define Dbl_and_signs( src1dst, src2) \ + Dallp1(src1dst) = (Dallp1(src2)|~((unsigned int)1<<31)) & Dallp1(src1dst) +#define Dbl_or_signs( src1dst, src2) \ + Dallp1(src1dst) = (Dallp1(src2)&((unsigned int)1<<31)) | Dallp1(src1dst) + +/* The hidden bit is always the low bit of the exponent */ +#define Dbl_clear_exponent_set_hidden(srcdst) Deposit_dexponent(srcdst,1) +#define Dbl_clear_signexponent_set_hidden(srcdst) \ + Deposit_dsignexponent(srcdst,1) +#define Dbl_clear_sign(srcdst) Dallp1(srcdst) &= ~((unsigned int)1<<31) +#define Dbl_clear_signexponent(srcdst) \ + Dallp1(srcdst) &= Dmantissap1((unsigned int)-1) + +/* Exponent field for doubles has already been cleared and may be + * included in the shift. Here we need to generate two double width + * variable shifts. The insignificant bits can be ignored. + * MTSAR f(varamount) + * VSHD srcdst.high,srcdst.low => srcdst.low + * VSHD 0,srcdst.high => srcdst.high + * This is very difficult to model with C expressions since the shift amount + * could exceed 32. */ +/* varamount must be less than 64 */ +#define Dbl_rightshift(srcdstA, srcdstB, varamount) \ + {if((varamount) >= 32) { \ + Dallp2(srcdstB) = Dallp1(srcdstA) >> (varamount-32); \ + Dallp1(srcdstA)=0; \ + } \ + else if(varamount > 0) { \ + Variable_shift_double(Dallp1(srcdstA), Dallp2(srcdstB), \ + (varamount), Dallp2(srcdstB)); \ + Dallp1(srcdstA) >>= varamount; \ + } } +/* varamount must be less than 64 */ +#define Dbl_rightshift_exponentmantissa(srcdstA, srcdstB, varamount) \ + {if((varamount) >= 32) { \ + Dallp2(srcdstB) = Dexponentmantissap1(srcdstA) >> (varamount-32); \ + Dallp1(srcdstA) &= ((unsigned int)1<<31); /* clear expmant field */ \ + } \ + else if(varamount > 0) { \ + Variable_shift_double(Dexponentmantissap1(srcdstA), Dallp2(srcdstB), \ + (varamount), Dallp2(srcdstB)); \ + Deposit_dexponentmantissap1(srcdstA, \ + (Dexponentmantissap1(srcdstA)>>varamount)); \ + } } +/* varamount must be less than 64 */ +#define Dbl_leftshift(srcdstA, srcdstB, varamount) \ + {if((varamount) >= 32) { \ + Dallp1(srcdstA) = Dallp2(srcdstB) << (varamount-32); \ + Dallp2(srcdstB)=0; \ + } \ + else { \ + if ((varamount) > 0) { \ + Dallp1(srcdstA) = (Dallp1(srcdstA) << (varamount)) | \ + (Dallp2(srcdstB) >> (32-(varamount))); \ + Dallp2(srcdstB) <<= varamount; \ + } \ + } } +#define Dbl_leftshiftby1_withextent(lefta,leftb,right,resulta,resultb) \ + Shiftdouble(Dallp1(lefta), Dallp2(leftb), 31, Dallp1(resulta)); \ + Shiftdouble(Dallp2(leftb), Extall(right), 31, Dallp2(resultb)) + +#define Dbl_rightshiftby1_withextent(leftb,right,dst) \ + Extall(dst) = (Dallp2(leftb) << 31) | ((unsigned int)Extall(right) >> 1) | \ + Extlow(right) + +#define Dbl_arithrightshiftby1(srcdstA,srcdstB) \ + Shiftdouble(Dallp1(srcdstA),Dallp2(srcdstB),1,Dallp2(srcdstB));\ + Dallp1(srcdstA) = (int)Dallp1(srcdstA) >> 1 + +/* Sign extend the sign bit with an integer destination */ +#define Dbl_signextendedsign(value) Dsignedsign(value) + +#define Dbl_isone_hidden(dbl_value) (Is_dhidden(dbl_value)!=0) +/* Singles and doubles may include the sign and exponent fields. The + * hidden bit and the hidden overflow must be included. */ +#define Dbl_increment(dbl_valueA,dbl_valueB) \ + if( (Dallp2(dbl_valueB) += 1) == 0 ) Dallp1(dbl_valueA) += 1 +#define Dbl_increment_mantissa(dbl_valueA,dbl_valueB) \ + if( (Dmantissap2(dbl_valueB) += 1) == 0 ) \ + Deposit_dmantissap1(dbl_valueA,dbl_valueA+1) +#define Dbl_decrement(dbl_valueA,dbl_valueB) \ + if( Dallp2(dbl_valueB) == 0 ) Dallp1(dbl_valueA) -= 1; \ + Dallp2(dbl_valueB) -= 1 + +#define Dbl_isone_sign(dbl_value) (Is_dsign(dbl_value)!=0) +#define Dbl_isone_hiddenoverflow(dbl_value) (Is_dhiddenoverflow(dbl_value)!=0) +#define Dbl_isone_lowmantissap1(dbl_valueA) (Is_dlowp1(dbl_valueA)!=0) +#define Dbl_isone_lowmantissap2(dbl_valueB) (Is_dlowp2(dbl_valueB)!=0) +#define Dbl_isone_signaling(dbl_value) (Is_dsignaling(dbl_value)!=0) +#define Dbl_is_signalingnan(dbl_value) (Dsignalingnan(dbl_value)==0xfff) +#define Dbl_isnotzero(dbl_valueA,dbl_valueB) \ + (Dallp1(dbl_valueA) || Dallp2(dbl_valueB)) +#define Dbl_isnotzero_hiddenhigh7mantissa(dbl_value) \ + (Dhiddenhigh7mantissa(dbl_value)!=0) +#define Dbl_isnotzero_exponent(dbl_value) (Dexponent(dbl_value)!=0) +#define Dbl_isnotzero_mantissa(dbl_valueA,dbl_valueB) \ + (Dmantissap1(dbl_valueA) || Dmantissap2(dbl_valueB)) +#define Dbl_isnotzero_mantissap1(dbl_valueA) (Dmantissap1(dbl_valueA)!=0) +#define Dbl_isnotzero_mantissap2(dbl_valueB) (Dmantissap2(dbl_valueB)!=0) +#define Dbl_isnotzero_exponentmantissa(dbl_valueA,dbl_valueB) \ + (Dexponentmantissap1(dbl_valueA) || Dmantissap2(dbl_valueB)) +#define Dbl_isnotzero_low4p2(dbl_value) (Dlow4p2(dbl_value)!=0) +#define Dbl_iszero(dbl_valueA,dbl_valueB) (Dallp1(dbl_valueA)==0 && \ + Dallp2(dbl_valueB)==0) +#define Dbl_iszero_allp1(dbl_value) (Dallp1(dbl_value)==0) +#define Dbl_iszero_allp2(dbl_value) (Dallp2(dbl_value)==0) +#define Dbl_iszero_hidden(dbl_value) (Is_dhidden(dbl_value)==0) +#define Dbl_iszero_hiddenoverflow(dbl_value) (Is_dhiddenoverflow(dbl_value)==0) +#define Dbl_iszero_hiddenhigh3mantissa(dbl_value) \ + (Dhiddenhigh3mantissa(dbl_value)==0) +#define Dbl_iszero_hiddenhigh7mantissa(dbl_value) \ + (Dhiddenhigh7mantissa(dbl_value)==0) +#define Dbl_iszero_sign(dbl_value) (Is_dsign(dbl_value)==0) +#define Dbl_iszero_exponent(dbl_value) (Dexponent(dbl_value)==0) +#define Dbl_iszero_mantissa(dbl_valueA,dbl_valueB) \ + (Dmantissap1(dbl_valueA)==0 && Dmantissap2(dbl_valueB)==0) +#define Dbl_iszero_exponentmantissa(dbl_valueA,dbl_valueB) \ + (Dexponentmantissap1(dbl_valueA)==0 && Dmantissap2(dbl_valueB)==0) +#define Dbl_isinfinity_exponent(dbl_value) \ + (Dexponent(dbl_value)==DBL_INFINITY_EXPONENT) +#define Dbl_isnotinfinity_exponent(dbl_value) \ + (Dexponent(dbl_value)!=DBL_INFINITY_EXPONENT) +#define Dbl_isinfinity(dbl_valueA,dbl_valueB) \ + (Dexponent(dbl_valueA)==DBL_INFINITY_EXPONENT && \ + Dmantissap1(dbl_valueA)==0 && Dmantissap2(dbl_valueB)==0) +#define Dbl_isnan(dbl_valueA,dbl_valueB) \ + (Dexponent(dbl_valueA)==DBL_INFINITY_EXPONENT && \ + (Dmantissap1(dbl_valueA)!=0 || Dmantissap2(dbl_valueB)!=0)) +#define Dbl_isnotnan(dbl_valueA,dbl_valueB) \ + (Dexponent(dbl_valueA)!=DBL_INFINITY_EXPONENT || \ + (Dmantissap1(dbl_valueA)==0 && Dmantissap2(dbl_valueB)==0)) + +#define Dbl_islessthan(dbl_op1a,dbl_op1b,dbl_op2a,dbl_op2b) \ + (Dallp1(dbl_op1a) < Dallp1(dbl_op2a) || \ + (Dallp1(dbl_op1a) == Dallp1(dbl_op2a) && \ + Dallp2(dbl_op1b) < Dallp2(dbl_op2b))) +#define Dbl_isgreaterthan(dbl_op1a,dbl_op1b,dbl_op2a,dbl_op2b) \ + (Dallp1(dbl_op1a) > Dallp1(dbl_op2a) || \ + (Dallp1(dbl_op1a) == Dallp1(dbl_op2a) && \ + Dallp2(dbl_op1b) > Dallp2(dbl_op2b))) +#define Dbl_isnotlessthan(dbl_op1a,dbl_op1b,dbl_op2a,dbl_op2b) \ + (Dallp1(dbl_op1a) > Dallp1(dbl_op2a) || \ + (Dallp1(dbl_op1a) == Dallp1(dbl_op2a) && \ + Dallp2(dbl_op1b) >= Dallp2(dbl_op2b))) +#define Dbl_isnotgreaterthan(dbl_op1a,dbl_op1b,dbl_op2a,dbl_op2b) \ + (Dallp1(dbl_op1a) < Dallp1(dbl_op2a) || \ + (Dallp1(dbl_op1a) == Dallp1(dbl_op2a) && \ + Dallp2(dbl_op1b) <= Dallp2(dbl_op2b))) +#define Dbl_isequal(dbl_op1a,dbl_op1b,dbl_op2a,dbl_op2b) \ + ((Dallp1(dbl_op1a) == Dallp1(dbl_op2a)) && \ + (Dallp2(dbl_op1b) == Dallp2(dbl_op2b))) + +#define Dbl_leftshiftby8(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),24,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 8 +#define Dbl_leftshiftby7(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),25,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 7 +#define Dbl_leftshiftby4(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),28,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 4 +#define Dbl_leftshiftby3(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),29,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 3 +#define Dbl_leftshiftby2(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),30,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 2 +#define Dbl_leftshiftby1(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),31,Dallp1(dbl_valueA)); \ + Dallp2(dbl_valueB) <<= 1 + +#define Dbl_rightshiftby8(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),8,Dallp2(dbl_valueB)); \ + Dallp1(dbl_valueA) >>= 8 +#define Dbl_rightshiftby4(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),4,Dallp2(dbl_valueB)); \ + Dallp1(dbl_valueA) >>= 4 +#define Dbl_rightshiftby2(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),2,Dallp2(dbl_valueB)); \ + Dallp1(dbl_valueA) >>= 2 +#define Dbl_rightshiftby1(dbl_valueA,dbl_valueB) \ + Shiftdouble(Dallp1(dbl_valueA),Dallp2(dbl_valueB),1,Dallp2(dbl_valueB)); \ + Dallp1(dbl_valueA) >>= 1 + +/* This magnitude comparison uses the signless first words and + * the regular part2 words. The comparison is graphically: + * + * 1st greater? ------------- + * | + * 1st less?-----------------+--------- + * | | + * 2nd greater or equal----->| | + * False True + */ +#define Dbl_ismagnitudeless(leftB,rightB,signlessleft,signlessright) \ + ((signlessleft <= signlessright) && \ + ( (signlessleft < signlessright) || (Dallp2(leftB)wd0; \ + Dallp2(destb) = src->wd1 +#define Dbl_copytoptr(srca,srcb,dest) \ + dest->wd0 = Dallp1(srca); \ + dest->wd1 = Dallp2(srcb) + +/* An infinity is represented with the max exponent and a zero mantissa */ +#define Dbl_setinfinity_exponent(dbl_value) \ + Deposit_dexponent(dbl_value,DBL_INFINITY_EXPONENT) +#define Dbl_setinfinity_exponentmantissa(dbl_valueA,dbl_valueB) \ + Deposit_dexponentmantissap1(dbl_valueA, \ + (DBL_INFINITY_EXPONENT << (32-(1+DBL_EXP_LENGTH)))); \ + Dmantissap2(dbl_valueB) = 0 +#define Dbl_setinfinitypositive(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) \ + = (DBL_INFINITY_EXPONENT << (32-(1+DBL_EXP_LENGTH))); \ + Dmantissap2(dbl_valueB) = 0 +#define Dbl_setinfinitynegative(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) = ((unsigned int)1<<31) | \ + (DBL_INFINITY_EXPONENT << (32-(1+DBL_EXP_LENGTH))); \ + Dmantissap2(dbl_valueB) = 0 +#define Dbl_setinfinity(dbl_valueA,dbl_valueB,sign) \ + Dallp1(dbl_valueA) = ((unsigned int)sign << 31) | \ + (DBL_INFINITY_EXPONENT << (32-(1+DBL_EXP_LENGTH))); \ + Dmantissap2(dbl_valueB) = 0 + +#define Dbl_sethigh4bits(dbl_value, extsign) Deposit_dhigh4p1(dbl_value,extsign) +#define Dbl_set_sign(dbl_value,sign) Deposit_dsign(dbl_value,sign) +#define Dbl_invert_sign(dbl_value) Deposit_dsign(dbl_value,~Dsign(dbl_value)) +#define Dbl_setone_sign(dbl_value) Deposit_dsign(dbl_value,1) +#define Dbl_setone_lowmantissap2(dbl_value) Deposit_dlowp2(dbl_value,1) +#define Dbl_setzero_sign(dbl_value) Dallp1(dbl_value) &= 0x7fffffff +#define Dbl_setzero_exponent(dbl_value) \ + Dallp1(dbl_value) &= 0x800fffff +#define Dbl_setzero_mantissa(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) &= 0xfff00000; \ + Dallp2(dbl_valueB) = 0 +#define Dbl_setzero_mantissap1(dbl_value) Dallp1(dbl_value) &= 0xfff00000 +#define Dbl_setzero_mantissap2(dbl_value) Dallp2(dbl_value) = 0 +#define Dbl_setzero_exponentmantissa(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) &= 0x80000000; \ + Dallp2(dbl_valueB) = 0 +#define Dbl_setzero_exponentmantissap1(dbl_valueA) \ + Dallp1(dbl_valueA) &= 0x80000000 +#define Dbl_setzero(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) = 0; Dallp2(dbl_valueB) = 0 +#define Dbl_setzerop1(dbl_value) Dallp1(dbl_value) = 0 +#define Dbl_setzerop2(dbl_value) Dallp2(dbl_value) = 0 +#define Dbl_setnegativezero(dbl_value) \ + Dallp1(dbl_value) = (unsigned int)1 << 31; Dallp2(dbl_value) = 0 +#define Dbl_setnegativezerop1(dbl_value) Dallp1(dbl_value) = (unsigned int)1<<31 + +/* Use the following macro for both overflow & underflow conditions */ +#define ovfl - +#define unfl + +#define Dbl_setwrapped_exponent(dbl_value,exponent,op) \ + Deposit_dexponent(dbl_value,(exponent op DBL_WRAP)) + +#define Dbl_setlargestpositive(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) = ((DBL_EMAX+DBL_BIAS) << (32-(1+DBL_EXP_LENGTH))) \ + | ((1<<(32-(1+DBL_EXP_LENGTH))) - 1 ); \ + Dallp2(dbl_valueB) = 0xFFFFFFFF +#define Dbl_setlargestnegative(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) = ((DBL_EMAX+DBL_BIAS) << (32-(1+DBL_EXP_LENGTH))) \ + | ((1<<(32-(1+DBL_EXP_LENGTH))) - 1 ) \ + | ((unsigned int)1<<31); \ + Dallp2(dbl_valueB) = 0xFFFFFFFF +#define Dbl_setlargest_exponentmantissa(dbl_valueA,dbl_valueB) \ + Deposit_dexponentmantissap1(dbl_valueA, \ + (((DBL_EMAX+DBL_BIAS) << (32-(1+DBL_EXP_LENGTH))) \ + | ((1<<(32-(1+DBL_EXP_LENGTH))) - 1 ))); \ + Dallp2(dbl_valueB) = 0xFFFFFFFF + +#define Dbl_setnegativeinfinity(dbl_valueA,dbl_valueB) \ + Dallp1(dbl_valueA) = ((1<= 32 ) \ + { \ + /* Big shift requires examining the portion shift off \ + the end to properly set inexact. */ \ + if(shift < 64) \ + { \ + if(shift > 32) \ + { \ + Variable_shift_double(Dallp1(srcdstA),Dallp2(srcdstB), \ + shift-32, Extall(extent)); \ + if(Dallp2(srcdstB) << 64 - (shift)) Ext_setone_low(extent); \ + } \ + else Extall(extent) = Dallp2(srcdstB); \ + Dallp2(srcdstB) = Dallp1(srcdstA) >> (shift - 32); \ + } \ + else \ + { \ + Extall(extent) = Dallp1(srcdstA); \ + if(Dallp2(srcdstB)) Ext_setone_low(extent); \ + Dallp2(srcdstB) = 0; \ + } \ + Dallp1(srcdstA) = 0; \ + } \ + else \ + { \ + /* Small alignment is simpler. Extension is easily set. */ \ + if (shift > 0) \ + { \ + Extall(extent) = Dallp2(srcdstB) << 32 - (shift); \ + Variable_shift_double(Dallp1(srcdstA),Dallp2(srcdstB),shift, \ + Dallp2(srcdstB)); \ + Dallp1(srcdstA) >>= shift; \ + } \ + else Extall(extent) = 0; \ + } + +/* + * Here we need to shift the result right to correct for an overshift + * (due to the exponent becoming negative) during normalization. + */ +#define Dbl_fix_overshift(srcdstA,srcdstB,shift,extent) \ + Extall(extent) = Dallp2(srcdstB) << 32 - (shift); \ + Dallp2(srcdstB) = (Dallp1(srcdstA) << 32 - (shift)) | \ + (Dallp2(srcdstB) >> (shift)); \ + Dallp1(srcdstA) = Dallp1(srcdstA) >> shift + +#define Dbl_hiddenhigh3mantissa(dbl_value) Dhiddenhigh3mantissa(dbl_value) +#define Dbl_hidden(dbl_value) Dhidden(dbl_value) +#define Dbl_lowmantissap2(dbl_value) Dlowp2(dbl_value) + +/* The left argument is never smaller than the right argument */ +#define Dbl_subtract(lefta,leftb,righta,rightb,resulta,resultb) \ + if( Dallp2(rightb) > Dallp2(leftb) ) Dallp1(lefta)--; \ + Dallp2(resultb) = Dallp2(leftb) - Dallp2(rightb); \ + Dallp1(resulta) = Dallp1(lefta) - Dallp1(righta) + +/* Subtract right augmented with extension from left augmented with zeros and + * store into result and extension. */ +#define Dbl_subtract_withextension(lefta,leftb,righta,rightb,extent,resulta,resultb) \ + Dbl_subtract(lefta,leftb,righta,rightb,resulta,resultb); \ + if( (Extall(extent) = 0-Extall(extent)) ) \ + { \ + if((Dallp2(resultb)--) == 0) Dallp1(resulta)--; \ + } + +#define Dbl_addition(lefta,leftb,righta,rightb,resulta,resultb) \ + /* If the sum of the low words is less than either source, then \ + * an overflow into the next word occurred. */ \ + Dallp1(resulta) = Dallp1(lefta) + Dallp1(righta); \ + if((Dallp2(resultb) = Dallp2(leftb) + Dallp2(rightb)) < Dallp2(rightb)) \ + Dallp1(resulta)++ + +#define Dbl_xortointp1(left,right,result) \ + result = Dallp1(left) XOR Dallp1(right) + +#define Dbl_xorfromintp1(left,right,result) \ + Dallp1(result) = left XOR Dallp1(right) + +#define Dbl_swap_lower(left,right) \ + Dallp2(left) = Dallp2(left) XOR Dallp2(right); \ + Dallp2(right) = Dallp2(left) XOR Dallp2(right); \ + Dallp2(left) = Dallp2(left) XOR Dallp2(right) + +/* Need to Initialize */ +#define Dbl_makequietnan(desta,destb) \ + Dallp1(desta) = ((DBL_EMAX+DBL_BIAS)+1)<< (32-(1+DBL_EXP_LENGTH)) \ + | (1<<(32-(1+DBL_EXP_LENGTH+2))); \ + Dallp2(destb) = 0 +#define Dbl_makesignalingnan(desta,destb) \ + Dallp1(desta) = ((DBL_EMAX+DBL_BIAS)+1)<< (32-(1+DBL_EXP_LENGTH)) \ + | (1<<(32-(1+DBL_EXP_LENGTH+1))); \ + Dallp2(destb) = 0 + +#define Dbl_normalize(dbl_opndA,dbl_opndB,exponent) \ + while(Dbl_iszero_hiddenhigh7mantissa(dbl_opndA)) { \ + Dbl_leftshiftby8(dbl_opndA,dbl_opndB); \ + exponent -= 8; \ + } \ + if(Dbl_iszero_hiddenhigh3mantissa(dbl_opndA)) { \ + Dbl_leftshiftby4(dbl_opndA,dbl_opndB); \ + exponent -= 4; \ + } \ + while(Dbl_iszero_hidden(dbl_opndA)) { \ + Dbl_leftshiftby1(dbl_opndA,dbl_opndB); \ + exponent -= 1; \ + } + +#define Twoword_add(src1dstA,src1dstB,src2A,src2B) \ + /* \ + * want this macro to generate: \ + * ADD src1dstB,src2B,src1dstB; \ + * ADDC src1dstA,src2A,src1dstA; \ + */ \ + if ((src1dstB) + (src2B) < (src1dstB)) Dallp1(src1dstA)++; \ + Dallp1(src1dstA) += (src2A); \ + Dallp2(src1dstB) += (src2B) + +#define Twoword_subtract(src1dstA,src1dstB,src2A,src2B) \ + /* \ + * want this macro to generate: \ + * SUB src1dstB,src2B,src1dstB; \ + * SUBB src1dstA,src2A,src1dstA; \ + */ \ + if ((src1dstB) < (src2B)) Dallp1(src1dstA)--; \ + Dallp1(src1dstA) -= (src2A); \ + Dallp2(src1dstB) -= (src2B) + +#define Dbl_setoverflow(resultA,resultB) \ + /* set result to infinity or largest number */ \ + switch (Rounding_mode()) { \ + case ROUNDPLUS: \ + if (Dbl_isone_sign(resultA)) { \ + Dbl_setlargestnegative(resultA,resultB); \ + } \ + else { \ + Dbl_setinfinitypositive(resultA,resultB); \ + } \ + break; \ + case ROUNDMINUS: \ + if (Dbl_iszero_sign(resultA)) { \ + Dbl_setlargestpositive(resultA,resultB); \ + } \ + else { \ + Dbl_setinfinitynegative(resultA,resultB); \ + } \ + break; \ + case ROUNDNEAREST: \ + Dbl_setinfinity_exponentmantissa(resultA,resultB); \ + break; \ + case ROUNDZERO: \ + Dbl_setlargest_exponentmantissa(resultA,resultB); \ + } + +#define Dbl_denormalize(opndp1,opndp2,exponent,guard,sticky,inexact) \ + Dbl_clear_signexponent_set_hidden(opndp1); \ + if (exponent >= (1-DBL_P)) { \ + if (exponent >= -31) { \ + guard = (Dallp2(opndp2) >> -exponent) & 1; \ + if (exponent < 0) sticky |= Dallp2(opndp2) << (32+exponent); \ + if (exponent > -31) { \ + Variable_shift_double(opndp1,opndp2,1-exponent,opndp2); \ + Dallp1(opndp1) >>= 1-exponent; \ + } \ + else { \ + Dallp2(opndp2) = Dallp1(opndp1); \ + Dbl_setzerop1(opndp1); \ + } \ + } \ + else { \ + guard = (Dallp1(opndp1) >> -32-exponent) & 1; \ + if (exponent == -32) sticky |= Dallp2(opndp2); \ + else sticky |= (Dallp2(opndp2) | Dallp1(opndp1) << 64+exponent); \ + Dallp2(opndp2) = Dallp1(opndp1) >> -31-exponent; \ + Dbl_setzerop1(opndp1); \ + } \ + inexact = guard | sticky; \ + } \ + else { \ + guard = 0; \ + sticky |= (Dallp1(opndp1) | Dallp2(opndp2)); \ + Dbl_setzero(opndp1,opndp2); \ + inexact = sticky; \ + } + +/* + * The fused multiply add instructions requires a double extended format, + * with 106 bits of mantissa. + */ +#define DBLEXT_THRESHOLD 106 + +#define Dblext_setzero(valA,valB,valC,valD) \ + Dextallp1(valA) = 0; Dextallp2(valB) = 0; \ + Dextallp3(valC) = 0; Dextallp4(valD) = 0 + + +#define Dblext_isnotzero_mantissap3(valC) (Dextallp3(valC)!=0) +#define Dblext_isnotzero_mantissap4(valD) (Dextallp3(valD)!=0) +#define Dblext_isone_lowp2(val) (Dextlowp2(val)!=0) +#define Dblext_isone_highp3(val) (Dexthighp3(val)!=0) +#define Dblext_isnotzero_low31p3(val) (Dextlow31p3(val)!=0) +#define Dblext_iszero(valA,valB,valC,valD) (Dextallp1(valA)==0 && \ + Dextallp2(valB)==0 && Dextallp3(valC)==0 && Dextallp4(valD)==0) + +#define Dblext_copy(srca,srcb,srcc,srcd,desta,destb,destc,destd) \ + Dextallp1(desta) = Dextallp4(srca); \ + Dextallp2(destb) = Dextallp4(srcb); \ + Dextallp3(destc) = Dextallp4(srcc); \ + Dextallp4(destd) = Dextallp4(srcd) + +#define Dblext_swap_lower(leftp2,leftp3,leftp4,rightp2,rightp3,rightp4) \ + Dextallp2(leftp2) = Dextallp2(leftp2) XOR Dextallp2(rightp2); \ + Dextallp2(rightp2) = Dextallp2(leftp2) XOR Dextallp2(rightp2); \ + Dextallp2(leftp2) = Dextallp2(leftp2) XOR Dextallp2(rightp2); \ + Dextallp3(leftp3) = Dextallp3(leftp3) XOR Dextallp3(rightp3); \ + Dextallp3(rightp3) = Dextallp3(leftp3) XOR Dextallp3(rightp3); \ + Dextallp3(leftp3) = Dextallp3(leftp3) XOR Dextallp3(rightp3); \ + Dextallp4(leftp4) = Dextallp4(leftp4) XOR Dextallp4(rightp4); \ + Dextallp4(rightp4) = Dextallp4(leftp4) XOR Dextallp4(rightp4); \ + Dextallp4(leftp4) = Dextallp4(leftp4) XOR Dextallp4(rightp4) + +#define Dblext_setone_lowmantissap4(dbl_value) Deposit_dextlowp4(dbl_value,1) + +/* The high bit is always zero so arithmetic or logical shifts will work. */ +#define Dblext_right_align(srcdstA,srcdstB,srcdstC,srcdstD,shift) \ + {int shiftamt, sticky; \ + shiftamt = shift % 32; \ + sticky = 0; \ + switch (shift/32) { \ + case 0: if (shiftamt > 0) { \ + sticky = Dextallp4(srcdstD) << 32 - (shiftamt); \ + Variable_shift_double(Dextallp3(srcdstC), \ + Dextallp4(srcdstD),shiftamt,Dextallp4(srcdstD)); \ + Variable_shift_double(Dextallp2(srcdstB), \ + Dextallp3(srcdstC),shiftamt,Dextallp3(srcdstC)); \ + Variable_shift_double(Dextallp1(srcdstA), \ + Dextallp2(srcdstB),shiftamt,Dextallp2(srcdstB)); \ + Dextallp1(srcdstA) >>= shiftamt; \ + } \ + break; \ + case 1: if (shiftamt > 0) { \ + sticky = (Dextallp3(srcdstC) << 31 - shiftamt) | \ + Dextallp4(srcdstD); \ + Variable_shift_double(Dextallp2(srcdstB), \ + Dextallp3(srcdstC),shiftamt,Dextallp4(srcdstD)); \ + Variable_shift_double(Dextallp1(srcdstA), \ + Dextallp2(srcdstB),shiftamt,Dextallp3(srcdstC)); \ + } \ + else { \ + sticky = Dextallp4(srcdstD); \ + Dextallp4(srcdstD) = Dextallp3(srcdstC); \ + Dextallp3(srcdstC) = Dextallp2(srcdstB); \ + } \ + Dextallp2(srcdstB) = Dextallp1(srcdstA) >> shiftamt; \ + Dextallp1(srcdstA) = 0; \ + break; \ + case 2: if (shiftamt > 0) { \ + sticky = (Dextallp2(srcdstB) << 31 - shiftamt) | \ + Dextallp3(srcdstC) | Dextallp4(srcdstD); \ + Variable_shift_double(Dextallp1(srcdstA), \ + Dextallp2(srcdstB),shiftamt,Dextallp4(srcdstD)); \ + } \ + else { \ + sticky = Dextallp3(srcdstC) | Dextallp4(srcdstD); \ + Dextallp4(srcdstD) = Dextallp2(srcdstB); \ + } \ + Dextallp3(srcdstC) = Dextallp1(srcdstA) >> shiftamt; \ + Dextallp1(srcdstA) = Dextallp2(srcdstB) = 0; \ + break; \ + case 3: if (shiftamt > 0) { \ + sticky = (Dextallp1(srcdstA) << 31 - shiftamt) | \ + Dextallp2(srcdstB) | Dextallp3(srcdstC) | \ + Dextallp4(srcdstD); \ + } \ + else { \ + sticky = Dextallp2(srcdstB) | Dextallp3(srcdstC) | \ + Dextallp4(srcdstD); \ + } \ + Dextallp4(srcdstD) = Dextallp1(srcdstA) >> shiftamt; \ + Dextallp1(srcdstA) = Dextallp2(srcdstB) = 0; \ + Dextallp3(srcdstC) = 0; \ + break; \ + } \ + if (sticky) Dblext_setone_lowmantissap4(srcdstD); \ + } + +/* The left argument is never smaller than the right argument */ +#define Dblext_subtract(lefta,leftb,leftc,leftd,righta,rightb,rightc,rightd,resulta,resultb,resultc,resultd) \ + if( Dextallp4(rightd) > Dextallp4(leftd) ) \ + if( (Dextallp3(leftc)--) == 0) \ + if( (Dextallp2(leftb)--) == 0) Dextallp1(lefta)--; \ + Dextallp4(resultd) = Dextallp4(leftd) - Dextallp4(rightd); \ + if( Dextallp3(rightc) > Dextallp3(leftc) ) \ + if( (Dextallp2(leftb)--) == 0) Dextallp1(lefta)--; \ + Dextallp3(resultc) = Dextallp3(leftc) - Dextallp3(rightc); \ + if( Dextallp2(rightb) > Dextallp2(leftb) ) Dextallp1(lefta)--; \ + Dextallp2(resultb) = Dextallp2(leftb) - Dextallp2(rightb); \ + Dextallp1(resulta) = Dextallp1(lefta) - Dextallp1(righta) + +#define Dblext_addition(lefta,leftb,leftc,leftd,righta,rightb,rightc,rightd,resulta,resultb,resultc,resultd) \ + /* If the sum of the low words is less than either source, then \ + * an overflow into the next word occurred. */ \ + if ((Dextallp4(resultd) = Dextallp4(leftd)+Dextallp4(rightd)) < \ + Dextallp4(rightd)) \ + if((Dextallp3(resultc) = Dextallp3(leftc)+Dextallp3(rightc)+1) <= \ + Dextallp3(rightc)) \ + if((Dextallp2(resultb) = Dextallp2(leftb)+Dextallp2(rightb)+1) \ + <= Dextallp2(rightb)) \ + Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta)+1; \ + else Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta); \ + else \ + if ((Dextallp2(resultb) = Dextallp2(leftb)+Dextallp2(rightb)) < \ + Dextallp2(rightb)) \ + Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta)+1; \ + else Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta); \ + else \ + if ((Dextallp3(resultc) = Dextallp3(leftc)+Dextallp3(rightc)) < \ + Dextallp3(rightc)) \ + if ((Dextallp2(resultb) = Dextallp2(leftb)+Dextallp2(rightb)+1) \ + <= Dextallp2(rightb)) \ + Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta)+1; \ + else Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta); \ + else \ + if ((Dextallp2(resultb) = Dextallp2(leftb)+Dextallp2(rightb)) < \ + Dextallp2(rightb)) \ + Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta)+1; \ + else Dextallp1(resulta) = Dextallp1(lefta)+Dextallp1(righta) + + +#define Dblext_arithrightshiftby1(srcdstA,srcdstB,srcdstC,srcdstD) \ + Shiftdouble(Dextallp3(srcdstC),Dextallp4(srcdstD),1,Dextallp4(srcdstD)); \ + Shiftdouble(Dextallp2(srcdstB),Dextallp3(srcdstC),1,Dextallp3(srcdstC)); \ + Shiftdouble(Dextallp1(srcdstA),Dextallp2(srcdstB),1,Dextallp2(srcdstB)); \ + Dextallp1(srcdstA) = (int)Dextallp1(srcdstA) >> 1 + +#define Dblext_leftshiftby8(valA,valB,valC,valD) \ + Shiftdouble(Dextallp1(valA),Dextallp2(valB),24,Dextallp1(valA)); \ + Shiftdouble(Dextallp2(valB),Dextallp3(valC),24,Dextallp2(valB)); \ + Shiftdouble(Dextallp3(valC),Dextallp4(valD),24,Dextallp3(valC)); \ + Dextallp4(valD) <<= 8 +#define Dblext_leftshiftby4(valA,valB,valC,valD) \ + Shiftdouble(Dextallp1(valA),Dextallp2(valB),28,Dextallp1(valA)); \ + Shiftdouble(Dextallp2(valB),Dextallp3(valC),28,Dextallp2(valB)); \ + Shiftdouble(Dextallp3(valC),Dextallp4(valD),28,Dextallp3(valC)); \ + Dextallp4(valD) <<= 4 +#define Dblext_leftshiftby3(valA,valB,valC,valD) \ + Shiftdouble(Dextallp1(valA),Dextallp2(valB),29,Dextallp1(valA)); \ + Shiftdouble(Dextallp2(valB),Dextallp3(valC),29,Dextallp2(valB)); \ + Shiftdouble(Dextallp3(valC),Dextallp4(valD),29,Dextallp3(valC)); \ + Dextallp4(valD) <<= 3 +#define Dblext_leftshiftby2(valA,valB,valC,valD) \ + Shiftdouble(Dextallp1(valA),Dextallp2(valB),30,Dextallp1(valA)); \ + Shiftdouble(Dextallp2(valB),Dextallp3(valC),30,Dextallp2(valB)); \ + Shiftdouble(Dextallp3(valC),Dextallp4(valD),30,Dextallp3(valC)); \ + Dextallp4(valD) <<= 2 +#define Dblext_leftshiftby1(valA,valB,valC,valD) \ + Shiftdouble(Dextallp1(valA),Dextallp2(valB),31,Dextallp1(valA)); \ + Shiftdouble(Dextallp2(valB),Dextallp3(valC),31,Dextallp2(valB)); \ + Shiftdouble(Dextallp3(valC),Dextallp4(valD),31,Dextallp3(valC)); \ + Dextallp4(valD) <<= 1 + +#define Dblext_rightshiftby4(valueA,valueB,valueC,valueD) \ + Shiftdouble(Dextallp3(valueC),Dextallp4(valueD),4,Dextallp4(valueD)); \ + Shiftdouble(Dextallp2(valueB),Dextallp3(valueC),4,Dextallp3(valueC)); \ + Shiftdouble(Dextallp1(valueA),Dextallp2(valueB),4,Dextallp2(valueB)); \ + Dextallp1(valueA) >>= 4 +#define Dblext_rightshiftby1(valueA,valueB,valueC,valueD) \ + Shiftdouble(Dextallp3(valueC),Dextallp4(valueD),1,Dextallp4(valueD)); \ + Shiftdouble(Dextallp2(valueB),Dextallp3(valueC),1,Dextallp3(valueC)); \ + Shiftdouble(Dextallp1(valueA),Dextallp2(valueB),1,Dextallp2(valueB)); \ + Dextallp1(valueA) >>= 1 + +#define Dblext_xortointp1(left,right,result) Dbl_xortointp1(left,right,result) + +#define Dblext_xorfromintp1(left,right,result) \ + Dbl_xorfromintp1(left,right,result) + +#define Dblext_copytoint_exponentmantissap1(src,dest) \ + Dbl_copytoint_exponentmantissap1(src,dest) + +#define Dblext_ismagnitudeless(leftB,rightB,signlessleft,signlessright) \ + Dbl_ismagnitudeless(leftB,rightB,signlessleft,signlessright) + +#define Dbl_copyto_dblext(src1,src2,dest1,dest2,dest3,dest4) \ + Dextallp1(dest1) = Dallp1(src1); Dextallp2(dest2) = Dallp2(src2); \ + Dextallp3(dest3) = 0; Dextallp4(dest4) = 0 + +#define Dblext_set_sign(dbl_value,sign) Dbl_set_sign(dbl_value,sign) +#define Dblext_clear_signexponent_set_hidden(srcdst) \ + Dbl_clear_signexponent_set_hidden(srcdst) +#define Dblext_clear_signexponent(srcdst) Dbl_clear_signexponent(srcdst) +#define Dblext_clear_sign(srcdst) Dbl_clear_sign(srcdst) +#define Dblext_isone_hidden(dbl_value) Dbl_isone_hidden(dbl_value) + +/* + * The Fourword_add() macro assumes that integers are 4 bytes in size. + * It will break if this is not the case. + */ + +#define Fourword_add(src1dstA,src1dstB,src1dstC,src1dstD,src2A,src2B,src2C,src2D) \ + /* \ + * want this macro to generate: \ + * ADD src1dstD,src2D,src1dstD; \ + * ADDC src1dstC,src2C,src1dstC; \ + * ADDC src1dstB,src2B,src1dstB; \ + * ADDC src1dstA,src2A,src1dstA; \ + */ \ + if ((unsigned int)(src1dstD += (src2D)) < (unsigned int)(src2D)) { \ + if ((unsigned int)(src1dstC += (src2C) + 1) <= \ + (unsigned int)(src2C)) { \ + if ((unsigned int)(src1dstB += (src2B) + 1) <= \ + (unsigned int)(src2B)) src1dstA++; \ + } \ + else if ((unsigned int)(src1dstB += (src2B)) < \ + (unsigned int)(src2B)) src1dstA++; \ + } \ + else { \ + if ((unsigned int)(src1dstC += (src2C)) < \ + (unsigned int)(src2C)) { \ + if ((unsigned int)(src1dstB += (src2B) + 1) <= \ + (unsigned int)(src2B)) src1dstA++; \ + } \ + else if ((unsigned int)(src1dstB += (src2B)) < \ + (unsigned int)(src2B)) src1dstA++; \ + } \ + src1dstA += (src2A) + +#define Dblext_denormalize(opndp1,opndp2,opndp3,opndp4,exponent,is_tiny) \ + {int shiftamt, sticky; \ + is_tiny = TRUE; \ + if (exponent == 0 && (Dextallp3(opndp3) || Dextallp4(opndp4))) { \ + switch (Rounding_mode()) { \ + case ROUNDPLUS: \ + if (Dbl_iszero_sign(opndp1)) { \ + Dbl_increment(opndp1,opndp2); \ + if (Dbl_isone_hiddenoverflow(opndp1)) \ + is_tiny = FALSE; \ + Dbl_decrement(opndp1,opndp2); \ + } \ + break; \ + case ROUNDMINUS: \ + if (Dbl_isone_sign(opndp1)) { \ + Dbl_increment(opndp1,opndp2); \ + if (Dbl_isone_hiddenoverflow(opndp1)) \ + is_tiny = FALSE; \ + Dbl_decrement(opndp1,opndp2); \ + } \ + break; \ + case ROUNDNEAREST: \ + if (Dblext_isone_highp3(opndp3) && \ + (Dblext_isone_lowp2(opndp2) || \ + Dblext_isnotzero_low31p3(opndp3))) { \ + Dbl_increment(opndp1,opndp2); \ + if (Dbl_isone_hiddenoverflow(opndp1)) \ + is_tiny = FALSE; \ + Dbl_decrement(opndp1,opndp2); \ + } \ + break; \ + } \ + } \ + Dblext_clear_signexponent_set_hidden(opndp1); \ + if (exponent >= (1-QUAD_P)) { \ + shiftamt = (1-exponent) % 32; \ + switch((1-exponent)/32) { \ + case 0: sticky = Dextallp4(opndp4) << 32-(shiftamt); \ + Variableshiftdouble(opndp3,opndp4,shiftamt,opndp4); \ + Variableshiftdouble(opndp2,opndp3,shiftamt,opndp3); \ + Variableshiftdouble(opndp1,opndp2,shiftamt,opndp2); \ + Dextallp1(opndp1) >>= shiftamt; \ + break; \ + case 1: sticky = (Dextallp3(opndp3) << 32-(shiftamt)) | \ + Dextallp4(opndp4); \ + Variableshiftdouble(opndp2,opndp3,shiftamt,opndp4); \ + Variableshiftdouble(opndp1,opndp2,shiftamt,opndp3); \ + Dextallp2(opndp2) = Dextallp1(opndp1) >> shiftamt; \ + Dextallp1(opndp1) = 0; \ + break; \ + case 2: sticky = (Dextallp2(opndp2) << 32-(shiftamt)) | \ + Dextallp3(opndp3) | Dextallp4(opndp4); \ + Variableshiftdouble(opndp1,opndp2,shiftamt,opndp4); \ + Dextallp3(opndp3) = Dextallp1(opndp1) >> shiftamt; \ + Dextallp1(opndp1) = Dextallp2(opndp2) = 0; \ + break; \ + case 3: sticky = (Dextallp1(opndp1) << 32-(shiftamt)) | \ + Dextallp2(opndp2) | Dextallp3(opndp3) | \ + Dextallp4(opndp4); \ + Dextallp4(opndp4) = Dextallp1(opndp1) >> shiftamt; \ + Dextallp1(opndp1) = Dextallp2(opndp2) = 0; \ + Dextallp3(opndp3) = 0; \ + break; \ + } \ + } \ + else { \ + sticky = Dextallp1(opndp1) | Dextallp2(opndp2) | \ + Dextallp3(opndp3) | Dextallp4(opndp4); \ + Dblext_setzero(opndp1,opndp2,opndp3,opndp4); \ + } \ + if (sticky) Dblext_setone_lowmantissap4(opndp4); \ + exponent = 0; \ + } diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c new file mode 100644 index 000000000000..f84f2586672b --- /dev/null +++ b/arch/parisc/math-emu/decode_exc.c @@ -0,0 +1,368 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/fp/decode_exc.c $ Revision: $ + * + * Purpose: + * <> + * + * External Interfaces: + * <> + * decode_fpu(Fpu_register, trap_counts) + * + * Internal Interfaces: + * <> + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" +/* #include "types.h" */ +#include +#include +/* #include */ + +#undef Fpustatus_register +#define Fpustatus_register Fpu_register[0] + +/* General definitions */ +#define DOESTRAP 1 +#define NOTRAP 0 +#define SIGNALCODE(signal, code) ((signal) << 24 | (code)); +#define copropbit 1<<31-2 /* bit position 2 */ +#define opclass 9 /* bits 21 & 22 */ +#define fmt 11 /* bits 19 & 20 */ +#define df 13 /* bits 17 & 18 */ +#define twobits 3 /* mask low-order 2 bits */ +#define fivebits 31 /* mask low-order 5 bits */ +#define MAX_EXCP_REG 7 /* number of excpeption registers to check */ + +/* Exception register definitions */ +#define Excp_type(index) Exceptiontype(Fpu_register[index]) +#define Excp_instr(index) Instructionfield(Fpu_register[index]) +#define Clear_excp_register(index) Allexception(Fpu_register[index]) = 0 +#define Excp_format() \ + (current_ir >> ((current_ir>>opclass & twobits)==1 ? df : fmt) & twobits) + +/* Miscellaneous definitions */ +#define Fpu_sgl(index) Fpu_register[index*2] + +#define Fpu_dblp1(index) Fpu_register[index*2] +#define Fpu_dblp2(index) Fpu_register[(index*2)+1] + +#define Fpu_quadp1(index) Fpu_register[index*2] +#define Fpu_quadp2(index) Fpu_register[(index*2)+1] +#define Fpu_quadp3(index) Fpu_register[(index*2)+2] +#define Fpu_quadp4(index) Fpu_register[(index*2)+3] + +/* Single precision floating-point definitions */ +#ifndef Sgl_decrement +# define Sgl_decrement(sgl_value) Sall(sgl_value)-- +#endif + +/* Double precision floating-point definitions */ +#ifndef Dbl_decrement +# define Dbl_decrement(dbl_valuep1,dbl_valuep2) \ + if ((Dallp2(dbl_valuep2)--) == 0) Dallp1(dbl_valuep1)-- +#endif + + +#define update_trap_counts(Fpu_register, aflags, bflags, trap_counts) { \ + aflags=(Fpu_register[0])>>27; /* assumes zero fill. 32 bit */ \ + Fpu_register[0] |= bflags; \ +} + +u_int +decode_fpu(unsigned int Fpu_register[], unsigned int trap_counts[]) +{ + unsigned int current_ir, excp; + int target, exception_index = 1; + boolean inexact; + unsigned int aflags; + unsigned int bflags; + unsigned int excptype; + + + /* Keep stats on how many floating point exceptions (based on type) + * that happen. Want to keep this overhead low, but still provide + * some information to the customer. All exits from this routine + * need to restore Fpu_register[0] + */ + + bflags=(Fpu_register[0] & 0xf8000000); + Fpu_register[0] &= 0x07ffffff; + + /* exception_index is used to index the exception register queue. It + * always points at the last register that contains a valid exception. A + * zero value implies no exceptions (also the initialized value). Setting + * the T-bit resets the exception_index to zero. + */ + + /* + * Check for reserved-op exception. A reserved-op exception does not + * set any exception registers nor does it set the T-bit. If the T-bit + * is not set then a reserved-op exception occurred. + * + * At some point, we may want to report reserved op exceptions as + * illegal instructions. + */ + + if (!Is_tbit_set()) { + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + return SIGNALCODE(SIGILL, ILL_COPROC); + } + + /* + * Is a coprocessor op. + * + * Now we need to determine what type of exception occurred. + */ + for (exception_index=1; exception_index<=MAX_EXCP_REG; exception_index++) { + current_ir = Excp_instr(exception_index); + /* + * On PA89: there are 5 different unimplemented exception + * codes: 0x1, 0x9, 0xb, 0x3, and 0x23. PA-RISC 2.0 adds + * another, 0x2b. Only these have the low order bit set. + */ + excptype = Excp_type(exception_index); + if (excptype & UNIMPLEMENTEDEXCEPTION) { + /* + * Clear T-bit and exception register so that + * we can tell if a trap really occurs while + * emulating the instruction. + */ + Clear_tbit(); + Clear_excp_register(exception_index); + /* + * Now emulate this instruction. If a trap occurs, + * fpudispatch will return a non-zero number + */ + excp = fpudispatch(current_ir,excptype,0,Fpu_register); + /* accumulate the status flags, don't lose them as in hpux */ + if (excp) { + /* + * We now need to make sure that the T-bit and the + * exception register contain the correct values + * before continuing. + */ + /* + * Set t-bit since it might still be needed for a + * subsequent real trap (I don't understand fully -PB) + */ + Set_tbit(); + /* some of the following code uses + * Excp_type(exception_index) so fix that up */ + Set_exceptiontype_and_instr_field(excp,current_ir, + Fpu_register[exception_index]); + if (excp == UNIMPLEMENTEDEXCEPTION) { + /* + * it is really unimplemented, so restore the + * TIMEX extended unimplemented exception code + */ + excp = excptype; + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + return SIGNALCODE(SIGILL, ILL_COPROC); + } + /* some of the following code uses excptype, so + * fix that up too */ + excptype = excp; + } + /* handle exceptions other than the real UNIMPLIMENTED the + * same way as if the hardware had caused them */ + if (excp == NOEXCEPTION) + /* For now use 'break', should technically be 'continue' */ + break; + } + + /* + * In PA89, the underflow exception has been extended to encode + * additional information. The exception looks like pp01x0, + * where x is 1 if inexact and pp represent the inexact bit (I) + * and the round away bit (RA) + */ + if (excptype & UNDERFLOWEXCEPTION) { + /* check for underflow trap enabled */ + if (Is_underflowtrap_enabled()) { + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTUND); + } else { + /* + * Isn't a real trap; we need to + * return the default value. + */ + target = current_ir & fivebits; +#ifndef lint + if (Ibit(Fpu_register[exception_index])) inexact = TRUE; + else inexact = FALSE; +#endif + switch (Excp_format()) { + case SGL: + /* + * If ra (round-away) is set, will + * want to undo the rounding done + * by the hardware. + */ + if (Rabit(Fpu_register[exception_index])) + Sgl_decrement(Fpu_sgl(target)); + + /* now denormalize */ + sgl_denormalize(&Fpu_sgl(target),&inexact,Rounding_mode()); + break; + case DBL: + /* + * If ra (round-away) is set, will + * want to undo the rounding done + * by the hardware. + */ + if (Rabit(Fpu_register[exception_index])) + Dbl_decrement(Fpu_dblp1(target),Fpu_dblp2(target)); + + /* now denormalize */ + dbl_denormalize(&Fpu_dblp1(target),&Fpu_dblp2(target), + &inexact,Rounding_mode()); + break; + } + if (inexact) Set_underflowflag(); + /* + * Underflow can generate an inexact + * exception. If inexact trap is enabled, + * want to do an inexact trap, otherwise + * set inexact flag. + */ + if (inexact && Is_inexacttrap_enabled()) { + /* + * Set exception field of exception register + * to inexact, parm field to zero. + * Underflow bit should be cleared. + */ + Set_exceptiontype(Fpu_register[exception_index], + INEXACTEXCEPTION); + Set_parmfield(Fpu_register[exception_index],0); + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTRES); + } + else { + /* + * Exception register needs to be cleared. + * Inexact flag needs to be set if inexact. + */ + Clear_excp_register(exception_index); + if (inexact) Set_inexactflag(); + } + } + continue; + } + switch(Excp_type(exception_index)) { + case OVERFLOWEXCEPTION: + case OVERFLOWEXCEPTION | INEXACTEXCEPTION: + /* check for overflow trap enabled */ + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + if (Is_overflowtrap_enabled()) { + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTOVF); + } else { + /* + * Isn't a real trap; we need to + * return the default value. + */ + target = current_ir & fivebits; + switch (Excp_format()) { + case SGL: + Sgl_setoverflow(Fpu_sgl(target)); + break; + case DBL: + Dbl_setoverflow(Fpu_dblp1(target),Fpu_dblp2(target)); + break; + } + Set_overflowflag(); + /* + * Overflow always generates an inexact + * exception. If inexact trap is enabled, + * want to do an inexact trap, otherwise + * set inexact flag. + */ + if (Is_inexacttrap_enabled()) { + /* + * Set exception field of exception + * register to inexact. Overflow + * bit should be cleared. + */ + Set_exceptiontype(Fpu_register[exception_index], + INEXACTEXCEPTION); + update_trap_counts(Fpu_register, aflags, bflags, + trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTRES); + } + else { + /* + * Exception register needs to be cleared. + * Inexact flag needs to be set. + */ + Clear_excp_register(exception_index); + Set_inexactflag(); + } + } + break; + case INVALIDEXCEPTION: + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTINV); + case DIVISIONBYZEROEXCEPTION: + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTDIV); + case INEXACTEXCEPTION: + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + return SIGNALCODE(SIGFPE, FPE_FLTRES); + default: + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + printk("%s(%d) Unknown FPU exception 0x%x\n", __FILE__, + __LINE__, Excp_type(exception_index)); + return SIGNALCODE(SIGILL, ILL_COPROC); + case NOEXCEPTION: /* no exception */ + /* + * Clear exception register in case + * other fields are non-zero. + */ + Clear_excp_register(exception_index); + break; + } + } + /* + * No real exceptions occurred. + */ + Clear_tbit(); + update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + return(NOTRAP); +} diff --git a/arch/parisc/math-emu/denormal.c b/arch/parisc/math-emu/denormal.c new file mode 100644 index 000000000000..60687e13c34f --- /dev/null +++ b/arch/parisc/math-emu/denormal.c @@ -0,0 +1,135 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/fp/denormal.c $ Revision: $ + * + * Purpose: + * <> + * + * External Interfaces: + * <> + * dbl_denormalize(dbl_opndp1,dbl_opndp2,inexactflag,rmode) + * sgl_denormalize(sgl_opnd,inexactflag,rmode) + * + * Internal Interfaces: + * <> + * + * Theory: + * <> + * + * END_DESC +*/ + + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "hppa.h" +#include +/* #include */ + +#undef Fpustatus_register +#define Fpustatus_register Fpu_register[0] + +void +sgl_denormalize(unsigned int *sgl_opnd, boolean *inexactflag, int rmode) +{ + unsigned int opnd; + int sign, exponent; + boolean guardbit = FALSE, stickybit, inexact; + + opnd = *sgl_opnd; + stickybit = *inexactflag; + exponent = Sgl_exponent(opnd) - SGL_WRAP; + sign = Sgl_sign(opnd); + Sgl_denormalize(opnd,exponent,guardbit,stickybit,inexact); + if (inexact) { + switch (rmode) { + case ROUNDPLUS: + if (sign == 0) { + Sgl_increment(opnd); + } + break; + case ROUNDMINUS: + if (sign != 0) { + Sgl_increment(opnd); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Sgl_isone_lowmantissa(opnd))) { + Sgl_increment(opnd); + } + break; + } + } + Sgl_set_sign(opnd,sign); + *sgl_opnd = opnd; + *inexactflag = inexact; + return; +} + +void +dbl_denormalize(unsigned int *dbl_opndp1, + unsigned int * dbl_opndp2, + boolean *inexactflag, + int rmode) +{ + unsigned int opndp1, opndp2; + int sign, exponent; + boolean guardbit = FALSE, stickybit, inexact; + + opndp1 = *dbl_opndp1; + opndp2 = *dbl_opndp2; + stickybit = *inexactflag; + exponent = Dbl_exponent(opndp1) - DBL_WRAP; + sign = Dbl_sign(opndp1); + Dbl_denormalize(opndp1,opndp2,exponent,guardbit,stickybit,inexact); + if (inexact) { + switch (rmode) { + case ROUNDPLUS: + if (sign == 0) { + Dbl_increment(opndp1,opndp2); + } + break; + case ROUNDMINUS: + if (sign != 0) { + Dbl_increment(opndp1,opndp2); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opndp2))) { + Dbl_increment(opndp1,opndp2); + } + break; + } + } + Dbl_set_sign(opndp1,sign); + *dbl_opndp1 = opndp1; + *dbl_opndp2 = opndp2; + *inexactflag = inexact; + return; +} diff --git a/arch/parisc/math-emu/dfadd.c b/arch/parisc/math-emu/dfadd.c new file mode 100644 index 000000000000..e147d7d3b0f4 --- /dev/null +++ b/arch/parisc/math-emu/dfadd.c @@ -0,0 +1,524 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfadd.c $Revision: 1.1 $ + * + * Purpose: + * Double_add: add two double precision values. + * + * External Interfaces: + * dbl_fadd(leftptr, rightptr, dstptr, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double_add: add two double precision values. + */ +dbl_fadd( + dbl_floating_point *leftptr, + dbl_floating_point *rightptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int signless_upper_left, signless_upper_right, save; + register unsigned int leftp1, leftp2, rightp1, rightp2, extent; + register unsigned int resultp1 = 0, resultp2 = 0; + + register int result_exponent, right_exponent, diff_exponent; + register int sign_save, jumpsize; + register boolean inexact = FALSE; + register boolean underflowtrap; + + /* Create local copies of the numbers */ + Dbl_copyfromptr(leftptr,leftp1,leftp2); + Dbl_copyfromptr(rightptr,rightp1,rightp2); + + /* A zero "save" helps discover equal operands (for later), * + * and is used in swapping operands (if needed). */ + Dbl_xortointp1(leftp1,rightp1,/*to*/save); + + /* + * check first operand for NaN's or infinity + */ + if ((result_exponent = Dbl_exponent(leftp1)) == DBL_INFINITY_EXPONENT) + { + if (Dbl_iszero_mantissa(leftp1,leftp2)) + { + if (Dbl_isnotnan(rightp1,rightp2)) + { + if (Dbl_isinfinity(rightp1,rightp2) && save!=0) + { + /* + * invalid since operands are opposite signed infinity's + */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * return infinity + */ + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + } + else + { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(leftp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(leftp1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(rightp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(rightp1); + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + } /* End left NaN or Infinity processing */ + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(rightp1)) + { + if (Dbl_iszero_mantissa(rightp1,rightp2)) + { + /* return infinity */ + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(rightp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(rightp1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } /* End right NaN or Infinity processing */ + + /* Invariant: Must be dealing with finite numbers */ + + /* Compare operands by removing the sign */ + Dbl_copytoint_exponentmantissap1(leftp1,signless_upper_left); + Dbl_copytoint_exponentmantissap1(rightp1,signless_upper_right); + + /* sign difference selects add or sub operation. */ + if(Dbl_ismagnitudeless(leftp2,rightp2,signless_upper_left,signless_upper_right)) + { + /* Set the left operand to the larger one by XOR swap * + * First finish the first word using "save" */ + Dbl_xorfromintp1(save,rightp1,/*to*/rightp1); + Dbl_xorfromintp1(save,leftp1,/*to*/leftp1); + Dbl_swap_lower(leftp2,rightp2); + result_exponent = Dbl_exponent(leftp1); + } + /* Invariant: left is not smaller than right. */ + + if((right_exponent = Dbl_exponent(rightp1)) == 0) + { + /* Denormalized operands. First look for zeroes */ + if(Dbl_iszero_mantissa(rightp1,rightp2)) + { + /* right is zero */ + if(Dbl_iszero_exponentmantissa(leftp1,leftp2)) + { + /* Both operands are zeros */ + if(Is_rounding_mode(ROUNDMINUS)) + { + Dbl_or_signs(leftp1,/*with*/rightp1); + } + else + { + Dbl_and_signs(leftp1,/*with*/rightp1); + } + } + else + { + /* Left is not a zero and must be the result. Trapped + * underflows are signaled if left is denormalized. Result + * is always exact. */ + if( (result_exponent == 0) && Is_underflowtrap_enabled() ) + { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(leftp1); + Dbl_leftshiftby1(leftp1,leftp2); + Dbl_normalize(leftp1,leftp2,result_exponent); + Dbl_set_sign(leftp1,/*using*/sign_save); + Dbl_setwrapped_exponent(leftp1,result_exponent,unfl); + Dbl_copytoptr(leftp1,leftp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + } + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + + /* Neither are zeroes */ + Dbl_clear_sign(rightp1); /* Exponent is already cleared */ + if(result_exponent == 0 ) + { + /* Both operands are denormalized. The result must be exact + * and is simply calculated. A sum could become normalized and a + * difference could cancel to a true zero. */ + if( (/*signed*/int) save < 0 ) + { + Dbl_subtract(leftp1,leftp2,/*minus*/rightp1,rightp2, + /*into*/resultp1,resultp2); + if(Dbl_iszero_mantissa(resultp1,resultp2)) + { + if(Is_rounding_mode(ROUNDMINUS)) + { + Dbl_setone_sign(resultp1); + } + else + { + Dbl_setzero_sign(resultp1); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else + { + Dbl_addition(leftp1,leftp2,rightp1,rightp2, + /*into*/resultp1,resultp2); + if(Dbl_isone_hidden(resultp1)) + { + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + if(Is_underflowtrap_enabled()) + { + /* need to normalize result */ + sign_save = Dbl_signextendedsign(resultp1); + Dbl_leftshiftby1(resultp1,resultp2); + Dbl_normalize(resultp1,resultp2,result_exponent); + Dbl_set_sign(resultp1,/*using*/sign_save); + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + right_exponent = 1; /* Set exponent to reflect different bias + * with denomalized numbers. */ + } + else + { + Dbl_clear_signexponent_set_hidden(rightp1); + } + Dbl_clear_exponent_set_hidden(leftp1); + diff_exponent = result_exponent - right_exponent; + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for this + * infrequent case. + */ + if(diff_exponent > DBL_THRESHOLD) + { + diff_exponent = DBL_THRESHOLD; + } + + /* Align right operand by shifting to right */ + Dbl_right_align(/*operand*/rightp1,rightp2,/*shifted by*/diff_exponent, + /*and lower to*/extent); + + /* Treat sum and difference of the operands separately. */ + if( (/*signed*/int) save < 0 ) + { + /* + * Difference of the two operands. Their can be no overflow. A + * borrow can occur out of the hidden bit and force a post + * normalization phase. + */ + Dbl_subtract_withextension(leftp1,leftp2,/*minus*/rightp1,rightp2, + /*with*/extent,/*into*/resultp1,resultp2); + if(Dbl_iszero_hidden(resultp1)) + { + /* Handle normalization */ + /* A straight foward algorithm would now shift the result + * and extension left until the hidden bit becomes one. Not + * all of the extension bits need participate in the shift. + * Only the two most significant bits (round and guard) are + * needed. If only a single shift is needed then the guard + * bit becomes a significant low order bit and the extension + * must participate in the rounding. If more than a single + * shift is needed, then all bits to the right of the guard + * bit are zeros, and the guard bit may or may not be zero. */ + sign_save = Dbl_signextendedsign(resultp1); + Dbl_leftshiftby1_withextent(resultp1,resultp2,extent,resultp1,resultp2); + + /* Need to check for a zero result. The sign and exponent + * fields have already been zeroed. The more efficient test + * of the full object can be used. + */ + if(Dbl_iszero(resultp1,resultp2)) + /* Must have been "x-x" or "x+(-x)". */ + { + if(Is_rounding_mode(ROUNDMINUS)) Dbl_setone_sign(resultp1); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + /* Look to see if normalization is finished. */ + if(Dbl_isone_hidden(resultp1)) + { + if(result_exponent==0) + { + /* Denormalized, exponent should be zero. Left operand * + * was normalized, so extent (guard, round) was zero */ + goto underflow; + } + else + { + /* No further normalization is needed. */ + Dbl_set_sign(resultp1,/*using*/sign_save); + Ext_leftshiftby1(extent); + goto round; + } + } + + /* Check for denormalized, exponent should be zero. Left * + * operand was normalized, so extent (guard, round) was zero */ + if(!(underflowtrap = Is_underflowtrap_enabled()) && + result_exponent==0) goto underflow; + + /* Shift extension to complete one bit of normalization and + * update exponent. */ + Ext_leftshiftby1(extent); + + /* Discover first one bit to determine shift amount. Use a + * modified binary search. We have already shifted the result + * one position right and still not found a one so the remainder + * of the extension must be zero and simplifies rounding. */ + /* Scan bytes */ + while(Dbl_iszero_hiddenhigh7mantissa(resultp1)) + { + Dbl_leftshiftby8(resultp1,resultp2); + if((result_exponent -= 8) <= 0 && !underflowtrap) + goto underflow; + } + /* Now narrow it down to the nibble */ + if(Dbl_iszero_hiddenhigh3mantissa(resultp1)) + { + /* The lower nibble contains the normalizing one */ + Dbl_leftshiftby4(resultp1,resultp2); + if((result_exponent -= 4) <= 0 && !underflowtrap) + goto underflow; + } + /* Select case were first bit is set (already normalized) + * otherwise select the proper shift. */ + if((jumpsize = Dbl_hiddenhigh3mantissa(resultp1)) > 7) + { + /* Already normalized */ + if(result_exponent <= 0) goto underflow; + Dbl_set_sign(resultp1,/*using*/sign_save); + Dbl_set_exponent(resultp1,/*using*/result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dbl_sethigh4bits(resultp1,/*using*/sign_save); + switch(jumpsize) + { + case 1: + { + Dbl_leftshiftby3(resultp1,resultp2); + result_exponent -= 3; + break; + } + case 2: + case 3: + { + Dbl_leftshiftby2(resultp1,resultp2); + result_exponent -= 2; + break; + } + case 4: + case 5: + case 6: + case 7: + { + Dbl_leftshiftby1(resultp1,resultp2); + result_exponent -= 1; + break; + } + } + if(result_exponent > 0) + { + Dbl_set_exponent(resultp1,/*using*/result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); /* Sign bit is already set */ + } + /* Fixup potential underflows */ + underflow: + if(Is_underflowtrap_enabled()) + { + Dbl_set_sign(resultp1,sign_save); + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + /* + * Since we cannot get an inexact denormalized result, + * we can now return. + */ + Dbl_fix_overshift(resultp1,resultp2,(1-result_exponent),extent); + Dbl_clear_signexponent(resultp1); + Dbl_set_sign(resultp1,sign_save); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } /* end if(hidden...)... */ + /* Fall through and round */ + } /* end if(save < 0)... */ + else + { + /* Add magnitudes */ + Dbl_addition(leftp1,leftp2,rightp1,rightp2,/*to*/resultp1,resultp2); + if(Dbl_isone_hiddenoverflow(resultp1)) + { + /* Prenormalization required. */ + Dbl_rightshiftby1_withextent(resultp2,extent,extent); + Dbl_arithrightshiftby1(resultp1,resultp2); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension is all zeros,then the result is + * exact. Otherwise round in the correct direction. No underflow is + * possible. If a postnormalization is necessary, then the mantissa is + * all zeros so no shift is needed. */ + round: + if(Ext_isnotzero(extent)) + { + inexact = TRUE; + switch(Rounding_mode()) + { + case ROUNDNEAREST: /* The default. */ + if(Ext_isone_sign(extent)) + { + /* at least 1/2 ulp */ + if(Ext_isnotzero_lower(extent) || + Dbl_isone_lowmantissap2(resultp2)) + { + /* either exactly half way and odd or more than 1/2ulp */ + Dbl_increment(resultp1,resultp2); + } + } + break; + + case ROUNDPLUS: + if(Dbl_iszero_sign(resultp1)) + { + /* Round up positive results */ + Dbl_increment(resultp1,resultp2); + } + break; + + case ROUNDMINUS: + if(Dbl_isone_sign(resultp1)) + { + /* Round down negative results */ + Dbl_increment(resultp1,resultp2); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if(Dbl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if(result_exponent == DBL_INFINITY_EXPONENT) + { + /* Overflow */ + if(Is_overflowtrap_enabled()) + { + Dbl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + else + { + inexact = TRUE; + Set_overflowflag(); + Dbl_setoverflow(resultp1,resultp2); + } + } + else Dbl_set_exponent(resultp1,result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if(inexact) + if(Is_inexacttrap_enabled()) + return(INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/dfcmp.c b/arch/parisc/math-emu/dfcmp.c new file mode 100644 index 000000000000..59521267ffcc --- /dev/null +++ b/arch/parisc/math-emu/dfcmp.c @@ -0,0 +1,181 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfcmp.c $Revision: 1.1 $ + * + * Purpose: + * dbl_cmp: compare two values + * + * External Interfaces: + * dbl_fcmp(leftptr, rightptr, cond, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + + +#include "float.h" +#include "dbl_float.h" + +/* + * dbl_cmp: compare two values + */ +int +dbl_fcmp (dbl_floating_point * leftptr, dbl_floating_point * rightptr, + unsigned int cond, unsigned int *status) + + /* The predicate to be tested */ + + { + register unsigned int leftp1, leftp2, rightp1, rightp2; + register int xorresult; + + /* Create local copies of the numbers */ + Dbl_copyfromptr(leftptr,leftp1,leftp2); + Dbl_copyfromptr(rightptr,rightp1,rightp2); + /* + * Test for NaN + */ + if( (Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) + || (Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) ) + { + /* Check if a NaN is involved. Signal an invalid exception when + * comparing a signaling NaN or when comparing quiet NaNs and the + * low bit of the condition is set */ + if( ((Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) + && Dbl_isnotzero_mantissa(leftp1,leftp2) + && (Exception(cond) || Dbl_isone_signaling(leftp1))) + || + ((Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) + && Dbl_isnotzero_mantissa(rightp1,rightp2) + && (Exception(cond) || Dbl_isone_signaling(rightp1))) ) + { + if( Is_invalidtrap_enabled() ) { + Set_status_cbit(Unordered(cond)); + return(INVALIDEXCEPTION); + } + else Set_invalidflag(); + Set_status_cbit(Unordered(cond)); + return(NOEXCEPTION); + } + /* All the exceptional conditions are handled, now special case + NaN compares */ + else if( ((Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) + && Dbl_isnotzero_mantissa(leftp1,leftp2)) + || + ((Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) + && Dbl_isnotzero_mantissa(rightp1,rightp2)) ) + { + /* NaNs always compare unordered. */ + Set_status_cbit(Unordered(cond)); + return(NOEXCEPTION); + } + /* infinities will drop down to the normal compare mechanisms */ + } + /* First compare for unequal signs => less or greater or + * special equal case */ + Dbl_xortointp1(leftp1,rightp1,xorresult); + if( xorresult < 0 ) + { + /* left negative => less, left positive => greater. + * equal is possible if both operands are zeros. */ + if( Dbl_iszero_exponentmantissa(leftp1,leftp2) + && Dbl_iszero_exponentmantissa(rightp1,rightp2) ) + { + Set_status_cbit(Equal(cond)); + } + else if( Dbl_isone_sign(leftp1) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + /* Signs are the same. Treat negative numbers separately + * from the positives because of the reversed sense. */ + else if(Dbl_isequal(leftp1,leftp2,rightp1,rightp2)) + { + Set_status_cbit(Equal(cond)); + } + else if( Dbl_iszero_sign(leftp1) ) + { + /* Positive compare */ + if( Dbl_allp1(leftp1) < Dbl_allp1(rightp1) ) + { + Set_status_cbit(Lessthan(cond)); + } + else if( Dbl_allp1(leftp1) > Dbl_allp1(rightp1) ) + { + Set_status_cbit(Greaterthan(cond)); + } + else + { + /* Equal first parts. Now we must use unsigned compares to + * resolve the two possibilities. */ + if( Dbl_allp2(leftp2) < Dbl_allp2(rightp2) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + } + else + { + /* Negative compare. Signed or unsigned compares + * both work the same. That distinction is only + * important when the sign bits differ. */ + if( Dbl_allp1(leftp1) > Dbl_allp1(rightp1) ) + { + Set_status_cbit(Lessthan(cond)); + } + else if( Dbl_allp1(leftp1) < Dbl_allp1(rightp1) ) + { + Set_status_cbit(Greaterthan(cond)); + } + else + { + /* Equal first parts. Now we must use unsigned compares to + * resolve the two possibilities. */ + if( Dbl_allp2(leftp2) > Dbl_allp2(rightp2) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + } + return(NOEXCEPTION); + } diff --git a/arch/parisc/math-emu/dfdiv.c b/arch/parisc/math-emu/dfdiv.c new file mode 100644 index 000000000000..d7d4bec0e76f --- /dev/null +++ b/arch/parisc/math-emu/dfdiv.c @@ -0,0 +1,400 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfdiv.c $Revision: 1.1 $ + * + * Purpose: + * Double Precision Floating-point Divide + * + * External Interfaces: + * dbl_fdiv(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double Precision Floating-point Divide + */ + +int +dbl_fdiv (dbl_floating_point * srcptr1, dbl_floating_point * srcptr2, + dbl_floating_point * dstptr, unsigned int *status) +{ + register unsigned int opnd1p1, opnd1p2, opnd2p1, opnd2p2; + register unsigned int opnd3p1, opnd3p2, resultp1, resultp2; + register int dest_exponent, count; + register boolean inexact = FALSE, guardbit = FALSE, stickybit = FALSE; + boolean is_tiny; + + Dbl_copyfromptr(srcptr1,opnd1p1,opnd1p2); + Dbl_copyfromptr(srcptr2,opnd2p1,opnd2p2); + /* + * set sign bit of result + */ + if (Dbl_sign(opnd1p1) ^ Dbl_sign(opnd2p1)) + Dbl_setnegativezerop1(resultp1); + else Dbl_setzerop1(resultp1); + /* + * check first operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd1p1)) { + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + if (Dbl_isnotnan(opnd2p1,opnd2p2)) { + if (Dbl_isinfinity(opnd2p1,opnd2p2)) { + /* + * invalid since both operands + * are infinity + */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd1p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd1p1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd2p1)) { + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + /* + * return zero + */ + Dbl_setzero_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * check for division by zero + */ + if (Dbl_iszero_exponentmantissa(opnd2p1,opnd2p2)) { + if (Dbl_iszero_exponentmantissa(opnd1p1,opnd1p2)) { + /* invalid since both operands are zero */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + if (Is_divisionbyzerotrap_enabled()) + return(DIVISIONBYZEROEXCEPTION); + Set_divisionbyzeroflag(); + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate exponent + */ + dest_exponent = Dbl_exponent(opnd1p1) - Dbl_exponent(opnd2p1) + DBL_BIAS; + + /* + * Generate mantissa + */ + if (Dbl_isnotzero_exponent(opnd1p1)) { + /* set hidden bit */ + Dbl_clear_signexponent_set_hidden(opnd1p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + Dbl_setzero_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, want to normalize */ + Dbl_clear_signexponent(opnd1p1); + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_normalize(opnd1p1,opnd1p2,dest_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Dbl_isnotzero_exponent(opnd2p1)) { + Dbl_clear_signexponent_set_hidden(opnd2p1); + } + else { + /* is denormalized; want to normalize */ + Dbl_clear_signexponent(opnd2p1); + Dbl_leftshiftby1(opnd2p1,opnd2p2); + while (Dbl_iszero_hiddenhigh7mantissa(opnd2p1)) { + dest_exponent+=8; + Dbl_leftshiftby8(opnd2p1,opnd2p2); + } + if (Dbl_iszero_hiddenhigh3mantissa(opnd2p1)) { + dest_exponent+=4; + Dbl_leftshiftby4(opnd2p1,opnd2p2); + } + while (Dbl_iszero_hidden(opnd2p1)) { + dest_exponent++; + Dbl_leftshiftby1(opnd2p1,opnd2p2); + } + } + + /* Divide the source mantissas */ + + /* + * A non-restoring divide algorithm is used. + */ + Twoword_subtract(opnd1p1,opnd1p2,opnd2p1,opnd2p2); + Dbl_setzero(opnd3p1,opnd3p2); + for (count=1; count <= DBL_P && (opnd1p1 || opnd1p2); count++) { + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_leftshiftby1(opnd3p1,opnd3p2); + if (Dbl_iszero_sign(opnd1p1)) { + Dbl_setone_lowmantissap2(opnd3p2); + Twoword_subtract(opnd1p1,opnd1p2,opnd2p1,opnd2p2); + } + else { + Twoword_add(opnd1p1, opnd1p2, opnd2p1, opnd2p2); + } + } + if (count <= DBL_P) { + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_setone_lowmantissap2(opnd3p2); + Dbl_leftshift(opnd3p1,opnd3p2,(DBL_P-count)); + if (Dbl_iszero_hidden(opnd3p1)) { + Dbl_leftshiftby1(opnd3p1,opnd3p2); + dest_exponent--; + } + } + else { + if (Dbl_iszero_hidden(opnd3p1)) { + /* need to get one more bit of result */ + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_leftshiftby1(opnd3p1,opnd3p2); + if (Dbl_iszero_sign(opnd1p1)) { + Dbl_setone_lowmantissap2(opnd3p2); + Twoword_subtract(opnd1p1,opnd1p2,opnd2p1,opnd2p2); + } + else { + Twoword_add(opnd1p1,opnd1p2,opnd2p1,opnd2p2); + } + dest_exponent--; + } + if (Dbl_iszero_sign(opnd1p1)) guardbit = TRUE; + stickybit = Dbl_allp1(opnd1p1) || Dbl_allp2(opnd1p2); + } + inexact = guardbit | stickybit; + + /* + * round result + */ + if (inexact && (dest_exponent > 0 || Is_underflowtrap_enabled())) { + Dbl_clear_signexponent(opnd3p1); + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) + Dbl_increment(opnd3p1,opnd3p2); + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) + Dbl_increment(opnd3p1,opnd3p2); + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opnd3p2))) { + Dbl_increment(opnd3p1,opnd3p2); + } + } + if (Dbl_isone_hidden(opnd3p1)) dest_exponent++; + } + Dbl_set_mantissa(resultp1,resultp2,opnd3p1,opnd3p2); + + /* + * Test for overflow + */ + if (dest_exponent >= DBL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,dest_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + Set_overflowflag(); + /* set result to infinity or largest number */ + Dbl_setoverflow(resultp1,resultp2); + inexact = TRUE; + } + /* + * Test for underflow + */ + else if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,dest_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return(UNDERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(UNDERFLOWEXCEPTION); + } + + /* Determine if should set underflow flag */ + is_tiny = TRUE; + if (dest_exponent == 0 && inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opnd3p2))) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + } + } + + /* + * denormalize result or set to signed zero + */ + stickybit = inexact; + Dbl_denormalize(opnd3p1,opnd3p2,dest_exponent,guardbit, + stickybit,inexact); + + /* return rounded number */ + if (inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opnd3p2))) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + } + if (is_tiny) Set_underflowflag(); + } + Dbl_set_exponentmantissa(resultp1,resultp2,opnd3p1,opnd3p2); + } + else Dbl_set_exponent(resultp1,dest_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/dfmpy.c b/arch/parisc/math-emu/dfmpy.c new file mode 100644 index 000000000000..4380f5a62ad1 --- /dev/null +++ b/arch/parisc/math-emu/dfmpy.c @@ -0,0 +1,394 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfmpy.c $Revision: 1.1 $ + * + * Purpose: + * Double Precision Floating-point Multiply + * + * External Interfaces: + * dbl_fmpy(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double Precision Floating-point Multiply + */ + +int +dbl_fmpy( + dbl_floating_point *srcptr1, + dbl_floating_point *srcptr2, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int opnd1p1, opnd1p2, opnd2p1, opnd2p2; + register unsigned int opnd3p1, opnd3p2, resultp1, resultp2; + register int dest_exponent, count; + register boolean inexact = FALSE, guardbit = FALSE, stickybit = FALSE; + boolean is_tiny; + + Dbl_copyfromptr(srcptr1,opnd1p1,opnd1p2); + Dbl_copyfromptr(srcptr2,opnd2p1,opnd2p2); + + /* + * set sign bit of result + */ + if (Dbl_sign(opnd1p1) ^ Dbl_sign(opnd2p1)) + Dbl_setnegativezerop1(resultp1); + else Dbl_setzerop1(resultp1); + /* + * check first operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd1p1)) { + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + if (Dbl_isnotnan(opnd2p1,opnd2p2)) { + if (Dbl_iszero_exponentmantissa(opnd2p1,opnd2p2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd1p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd1p1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd2p1)) { + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + if (Dbl_iszero_exponentmantissa(opnd1p1,opnd1p2)) { + /* invalid since operands are zero & infinity */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(opnd2p1,opnd2p2); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate exponent + */ + dest_exponent = Dbl_exponent(opnd1p1) + Dbl_exponent(opnd2p1) -DBL_BIAS; + + /* + * Generate mantissa + */ + if (Dbl_isnotzero_exponent(opnd1p1)) { + /* set hidden bit */ + Dbl_clear_signexponent_set_hidden(opnd1p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + Dbl_setzero_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Dbl_clear_signexponent(opnd1p1); + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_normalize(opnd1p1,opnd1p2,dest_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Dbl_isnotzero_exponent(opnd2p1)) { + Dbl_clear_signexponent_set_hidden(opnd2p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + Dbl_setzero_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Dbl_clear_signexponent(opnd2p1); + Dbl_leftshiftby1(opnd2p1,opnd2p2); + Dbl_normalize(opnd2p1,opnd2p2,dest_exponent); + } + + /* Multiply two source mantissas together */ + + /* make room for guard bits */ + Dbl_leftshiftby7(opnd2p1,opnd2p2); + Dbl_setzero(opnd3p1,opnd3p2); + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count=1;count<=DBL_P;count+=4) { + stickybit |= Dlow4p2(opnd3p2); + Dbl_rightshiftby4(opnd3p1,opnd3p2); + if (Dbit28p2(opnd1p2)) { + /* Twoword_add should be an ADDC followed by an ADD. */ + Twoword_add(opnd3p1, opnd3p2, opnd2p1<<3 | opnd2p2>>29, + opnd2p2<<3); + } + if (Dbit29p2(opnd1p2)) { + Twoword_add(opnd3p1, opnd3p2, opnd2p1<<2 | opnd2p2>>30, + opnd2p2<<2); + } + if (Dbit30p2(opnd1p2)) { + Twoword_add(opnd3p1, opnd3p2, opnd2p1<<1 | opnd2p2>>31, + opnd2p2<<1); + } + if (Dbit31p2(opnd1p2)) { + Twoword_add(opnd3p1, opnd3p2, opnd2p1, opnd2p2); + } + Dbl_rightshiftby4(opnd1p1,opnd1p2); + } + if (Dbit3p1(opnd3p1)==0) { + Dbl_leftshiftby1(opnd3p1,opnd3p2); + } + else { + /* result mantissa >= 2. */ + dest_exponent++; + } + /* check for denormalized result */ + while (Dbit3p1(opnd3p1)==0) { + Dbl_leftshiftby1(opnd3p1,opnd3p2); + dest_exponent--; + } + /* + * check for guard, sticky and inexact bits + */ + stickybit |= Dallp2(opnd3p2) << 25; + guardbit = (Dallp2(opnd3p2) << 24) >> 31; + inexact = guardbit | stickybit; + + /* align result mantissa */ + Dbl_rightshiftby8(opnd3p1,opnd3p2); + + /* + * round result + */ + if (inexact && (dest_exponent>0 || Is_underflowtrap_enabled())) { + Dbl_clear_signexponent(opnd3p1); + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) + Dbl_increment(opnd3p1,opnd3p2); + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) + Dbl_increment(opnd3p1,opnd3p2); + break; + case ROUNDNEAREST: + if (guardbit) { + if (stickybit || Dbl_isone_lowmantissap2(opnd3p2)) + Dbl_increment(opnd3p1,opnd3p2); + } + } + if (Dbl_isone_hidden(opnd3p1)) dest_exponent++; + } + Dbl_set_mantissa(resultp1,resultp2,opnd3p1,opnd3p2); + + /* + * Test for overflow + */ + if (dest_exponent >= DBL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,dest_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return (OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + /* set result to infinity or largest number */ + Dbl_setoverflow(resultp1,resultp2); + } + /* + * Test for underflow + */ + else if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,dest_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (UNDERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return (UNDERFLOWEXCEPTION); + } + + /* Determine if should set underflow flag */ + is_tiny = TRUE; + if (dest_exponent == 0 && inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opnd3p2))) { + Dbl_increment(opnd3p1,opnd3p2); + if (Dbl_isone_hiddenoverflow(opnd3p1)) + is_tiny = FALSE; + Dbl_decrement(opnd3p1,opnd3p2); + } + break; + } + } + + /* + * denormalize result or set to signed zero + */ + stickybit = inexact; + Dbl_denormalize(opnd3p1,opnd3p2,dest_exponent,guardbit, + stickybit,inexact); + + /* return zero or smallest number */ + if (inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Dbl_isone_lowmantissap2(opnd3p2))) { + Dbl_increment(opnd3p1,opnd3p2); + } + break; + } + if (is_tiny) Set_underflowflag(); + } + Dbl_set_exponentmantissa(resultp1,resultp2,opnd3p1,opnd3p2); + } + else Dbl_set_exponent(resultp1,dest_exponent); + /* check for inexact */ + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/dfrem.c b/arch/parisc/math-emu/dfrem.c new file mode 100644 index 000000000000..b98378534677 --- /dev/null +++ b/arch/parisc/math-emu/dfrem.c @@ -0,0 +1,297 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfrem.c $Revision: 1.1 $ + * + * Purpose: + * Double Precision Floating-point Remainder + * + * External Interfaces: + * dbl_frem(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double Precision Floating-point Remainder + */ + +int +dbl_frem (dbl_floating_point * srcptr1, dbl_floating_point * srcptr2, + dbl_floating_point * dstptr, unsigned int *status) +{ + register unsigned int opnd1p1, opnd1p2, opnd2p1, opnd2p2; + register unsigned int resultp1, resultp2; + register int opnd1_exponent, opnd2_exponent, dest_exponent, stepcount; + register boolean roundup = FALSE; + + Dbl_copyfromptr(srcptr1,opnd1p1,opnd1p2); + Dbl_copyfromptr(srcptr2,opnd2p1,opnd2p2); + /* + * check first operand for NaN's or infinity + */ + if ((opnd1_exponent = Dbl_exponent(opnd1p1)) == DBL_INFINITY_EXPONENT) { + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + if (Dbl_isnotnan(opnd2p1,opnd2p2)) { + /* invalid since first operand is infinity */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd1p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd1p1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if ((opnd2_exponent = Dbl_exponent(opnd2p1)) == DBL_INFINITY_EXPONENT) { + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + /* + * return first operand + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * check second operand for zero + */ + if (Dbl_iszero_exponentmantissa(opnd2p1,opnd2p2)) { + /* invalid since second operand is zero */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * get sign of result + */ + resultp1 = opnd1p1; + + /* + * check for denormalized operands + */ + if (opnd1_exponent == 0) { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + /* normalize, then continue */ + opnd1_exponent = 1; + Dbl_normalize(opnd1p1,opnd1p2,opnd1_exponent); + } + else { + Dbl_clear_signexponent_set_hidden(opnd1p1); + } + if (opnd2_exponent == 0) { + /* normalize, then continue */ + opnd2_exponent = 1; + Dbl_normalize(opnd2p1,opnd2p2,opnd2_exponent); + } + else { + Dbl_clear_signexponent_set_hidden(opnd2p1); + } + + /* find result exponent and divide step loop count */ + dest_exponent = opnd2_exponent - 1; + stepcount = opnd1_exponent - opnd2_exponent; + + /* + * check for opnd1/opnd2 < 1 + */ + if (stepcount < 0) { + /* + * check for opnd1/opnd2 > 1/2 + * + * In this case n will round to 1, so + * r = opnd1 - opnd2 + */ + if (stepcount == -1 && + Dbl_isgreaterthan(opnd1p1,opnd1p2,opnd2p1,opnd2p2)) { + /* set sign */ + Dbl_allp1(resultp1) = ~Dbl_allp1(resultp1); + /* align opnd2 with opnd1 */ + Dbl_leftshiftby1(opnd2p1,opnd2p2); + Dbl_subtract(opnd2p1,opnd2p2,opnd1p1,opnd1p2, + opnd2p1,opnd2p2); + /* now normalize */ + while (Dbl_iszero_hidden(opnd2p1)) { + Dbl_leftshiftby1(opnd2p1,opnd2p2); + dest_exponent--; + } + Dbl_set_exponentmantissa(resultp1,resultp2,opnd2p1,opnd2p2); + goto testforunderflow; + } + /* + * opnd1/opnd2 <= 1/2 + * + * In this case n will round to zero, so + * r = opnd1 + */ + Dbl_set_exponentmantissa(resultp1,resultp2,opnd1p1,opnd1p2); + dest_exponent = opnd1_exponent; + goto testforunderflow; + } + + /* + * Generate result + * + * Do iterative subtract until remainder is less than operand 2. + */ + while (stepcount-- > 0 && (Dbl_allp1(opnd1p1) || Dbl_allp2(opnd1p2))) { + if (Dbl_isnotlessthan(opnd1p1,opnd1p2,opnd2p1,opnd2p2)) { + Dbl_subtract(opnd1p1,opnd1p2,opnd2p1,opnd2p2,opnd1p1,opnd1p2); + } + Dbl_leftshiftby1(opnd1p1,opnd1p2); + } + /* + * Do last subtract, then determine which way to round if remainder + * is exactly 1/2 of opnd2 + */ + if (Dbl_isnotlessthan(opnd1p1,opnd1p2,opnd2p1,opnd2p2)) { + Dbl_subtract(opnd1p1,opnd1p2,opnd2p1,opnd2p2,opnd1p1,opnd1p2); + roundup = TRUE; + } + if (stepcount > 0 || Dbl_iszero(opnd1p1,opnd1p2)) { + /* division is exact, remainder is zero */ + Dbl_setzero_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * Check for cases where opnd1/opnd2 < n + * + * In this case the result's sign will be opposite that of + * opnd1. The mantissa also needs some correction. + */ + Dbl_leftshiftby1(opnd1p1,opnd1p2); + if (Dbl_isgreaterthan(opnd1p1,opnd1p2,opnd2p1,opnd2p2)) { + Dbl_invert_sign(resultp1); + Dbl_leftshiftby1(opnd2p1,opnd2p2); + Dbl_subtract(opnd2p1,opnd2p2,opnd1p1,opnd1p2,opnd1p1,opnd1p2); + } + /* check for remainder being exactly 1/2 of opnd2 */ + else if (Dbl_isequal(opnd1p1,opnd1p2,opnd2p1,opnd2p2) && roundup) { + Dbl_invert_sign(resultp1); + } + + /* normalize result's mantissa */ + while (Dbl_iszero_hidden(opnd1p1)) { + dest_exponent--; + Dbl_leftshiftby1(opnd1p1,opnd1p2); + } + Dbl_set_exponentmantissa(resultp1,resultp2,opnd1p1,opnd1p2); + + /* + * Test for underflow + */ + testforunderflow: + if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,dest_exponent,unfl); + /* frem is always exact */ + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(UNDERFLOWEXCEPTION); + } + /* + * denormalize result or set to signed zero + */ + if (dest_exponent >= (1 - DBL_P)) { + Dbl_rightshift_exponentmantissa(resultp1,resultp2, + 1-dest_exponent); + } + else { + Dbl_setzero_exponentmantissa(resultp1,resultp2); + } + } + else Dbl_set_exponent(resultp1,dest_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/dfsqrt.c b/arch/parisc/math-emu/dfsqrt.c new file mode 100644 index 000000000000..b6ed1066f1e4 --- /dev/null +++ b/arch/parisc/math-emu/dfsqrt.c @@ -0,0 +1,195 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfsqrt.c $Revision: 1.1 $ + * + * Purpose: + * Double Floating-point Square Root + * + * External Interfaces: + * dbl_fsqrt(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double Floating-point Square Root + */ + +/*ARGSUSED*/ +unsigned int +dbl_fsqrt( + dbl_floating_point *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int srcp1, srcp2, resultp1, resultp2; + register unsigned int newbitp1, newbitp2, sump1, sump2; + register int src_exponent; + register boolean guardbit = FALSE, even_exponent; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + /* + * check source operand for NaN or infinity + */ + if ((src_exponent = Dbl_exponent(srcp1)) == DBL_INFINITY_EXPONENT) { + /* + * is signaling NaN? + */ + if (Dbl_isone_signaling(srcp1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(srcp1); + } + /* + * Return quiet NaN or positive infinity. + * Fall thru to negative test if negative infinity. + */ + if (Dbl_iszero_sign(srcp1) || + Dbl_isnotzero_mantissa(srcp1,srcp2)) { + Dbl_copytoptr(srcp1,srcp2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check for zero source operand + */ + if (Dbl_iszero_exponentmantissa(srcp1,srcp2)) { + Dbl_copytoptr(srcp1,srcp2,dstptr); + return(NOEXCEPTION); + } + + /* + * check for negative source operand + */ + if (Dbl_isone_sign(srcp1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_makequietnan(srcp1,srcp2); + Dbl_copytoptr(srcp1,srcp2,dstptr); + return(NOEXCEPTION); + } + + /* + * Generate result + */ + if (src_exponent > 0) { + even_exponent = Dbl_hidden(srcp1); + Dbl_clear_signexponent_set_hidden(srcp1); + } + else { + /* normalize operand */ + Dbl_clear_signexponent(srcp1); + src_exponent++; + Dbl_normalize(srcp1,srcp2,src_exponent); + even_exponent = src_exponent & 1; + } + if (even_exponent) { + /* exponent is even */ + /* Add comment here. Explain why odd exponent needs correction */ + Dbl_leftshiftby1(srcp1,srcp2); + } + /* + * Add comment here. Explain following algorithm. + * + * Trust me, it works. + * + */ + Dbl_setzero(resultp1,resultp2); + Dbl_allp1(newbitp1) = 1 << (DBL_P - 32); + Dbl_setzero_mantissap2(newbitp2); + while (Dbl_isnotzero(newbitp1,newbitp2) && Dbl_isnotzero(srcp1,srcp2)) { + Dbl_addition(resultp1,resultp2,newbitp1,newbitp2,sump1,sump2); + if(Dbl_isnotgreaterthan(sump1,sump2,srcp1,srcp2)) { + Dbl_leftshiftby1(newbitp1,newbitp2); + /* update result */ + Dbl_addition(resultp1,resultp2,newbitp1,newbitp2, + resultp1,resultp2); + Dbl_subtract(srcp1,srcp2,sump1,sump2,srcp1,srcp2); + Dbl_rightshiftby2(newbitp1,newbitp2); + } + else { + Dbl_rightshiftby1(newbitp1,newbitp2); + } + Dbl_leftshiftby1(srcp1,srcp2); + } + /* correct exponent for pre-shift */ + if (even_exponent) { + Dbl_rightshiftby1(resultp1,resultp2); + } + + /* check for inexact */ + if (Dbl_isnotzero(srcp1,srcp2)) { + if (!even_exponent && Dbl_islessthan(resultp1,resultp2,srcp1,srcp2)) { + Dbl_increment(resultp1,resultp2); + } + guardbit = Dbl_lowmantissap2(resultp2); + Dbl_rightshiftby1(resultp1,resultp2); + + /* now round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + Dbl_increment(resultp1,resultp2); + break; + case ROUNDNEAREST: + /* stickybit is always true, so guardbit + * is enough to determine rounding */ + if (guardbit) { + Dbl_increment(resultp1,resultp2); + } + break; + } + /* increment result exponent by 1 if mantissa overflowed */ + if (Dbl_isone_hiddenoverflow(resultp1)) src_exponent+=2; + + if (Is_inexacttrap_enabled()) { + Dbl_set_exponent(resultp1, + ((src_exponent-DBL_BIAS)>>1)+DBL_BIAS); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + else { + Dbl_rightshiftby1(resultp1,resultp2); + } + Dbl_set_exponent(resultp1,((src_exponent-DBL_BIAS)>>1)+DBL_BIAS); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/dfsub.c b/arch/parisc/math-emu/dfsub.c new file mode 100644 index 000000000000..87ebc60d465b --- /dev/null +++ b/arch/parisc/math-emu/dfsub.c @@ -0,0 +1,526 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/dfsub.c $Revision: 1.1 $ + * + * Purpose: + * Double_subtract: subtract two double precision values. + * + * External Interfaces: + * dbl_fsub(leftptr, rightptr, dstptr, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "dbl_float.h" + +/* + * Double_subtract: subtract two double precision values. + */ +int +dbl_fsub( + dbl_floating_point *leftptr, + dbl_floating_point *rightptr, + dbl_floating_point *dstptr, + unsigned int *status) + { + register unsigned int signless_upper_left, signless_upper_right, save; + register unsigned int leftp1, leftp2, rightp1, rightp2, extent; + register unsigned int resultp1 = 0, resultp2 = 0; + + register int result_exponent, right_exponent, diff_exponent; + register int sign_save, jumpsize; + register boolean inexact = FALSE, underflowtrap; + + /* Create local copies of the numbers */ + Dbl_copyfromptr(leftptr,leftp1,leftp2); + Dbl_copyfromptr(rightptr,rightp1,rightp2); + + /* A zero "save" helps discover equal operands (for later), * + * and is used in swapping operands (if needed). */ + Dbl_xortointp1(leftp1,rightp1,/*to*/save); + + /* + * check first operand for NaN's or infinity + */ + if ((result_exponent = Dbl_exponent(leftp1)) == DBL_INFINITY_EXPONENT) + { + if (Dbl_iszero_mantissa(leftp1,leftp2)) + { + if (Dbl_isnotnan(rightp1,rightp2)) + { + if (Dbl_isinfinity(rightp1,rightp2) && save==0) + { + /* + * invalid since operands are same signed infinity's + */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * return infinity + */ + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + } + else + { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(leftp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(leftp1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(rightp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(rightp1); + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + } /* End left NaN or Infinity processing */ + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(rightp1)) + { + if (Dbl_iszero_mantissa(rightp1,rightp2)) + { + /* return infinity */ + Dbl_invert_sign(rightp1); + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(rightp1)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(rightp1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(rightp1,rightp2,dstptr); + return(NOEXCEPTION); + } /* End right NaN or Infinity processing */ + + /* Invariant: Must be dealing with finite numbers */ + + /* Compare operands by removing the sign */ + Dbl_copytoint_exponentmantissap1(leftp1,signless_upper_left); + Dbl_copytoint_exponentmantissap1(rightp1,signless_upper_right); + + /* sign difference selects add or sub operation. */ + if(Dbl_ismagnitudeless(leftp2,rightp2,signless_upper_left,signless_upper_right)) + { + /* Set the left operand to the larger one by XOR swap * + * First finish the first word using "save" */ + Dbl_xorfromintp1(save,rightp1,/*to*/rightp1); + Dbl_xorfromintp1(save,leftp1,/*to*/leftp1); + Dbl_swap_lower(leftp2,rightp2); + result_exponent = Dbl_exponent(leftp1); + Dbl_invert_sign(leftp1); + } + /* Invariant: left is not smaller than right. */ + + if((right_exponent = Dbl_exponent(rightp1)) == 0) + { + /* Denormalized operands. First look for zeroes */ + if(Dbl_iszero_mantissa(rightp1,rightp2)) + { + /* right is zero */ + if(Dbl_iszero_exponentmantissa(leftp1,leftp2)) + { + /* Both operands are zeros */ + Dbl_invert_sign(rightp1); + if(Is_rounding_mode(ROUNDMINUS)) + { + Dbl_or_signs(leftp1,/*with*/rightp1); + } + else + { + Dbl_and_signs(leftp1,/*with*/rightp1); + } + } + else + { + /* Left is not a zero and must be the result. Trapped + * underflows are signaled if left is denormalized. Result + * is always exact. */ + if( (result_exponent == 0) && Is_underflowtrap_enabled() ) + { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(leftp1); + Dbl_leftshiftby1(leftp1,leftp2); + Dbl_normalize(leftp1,leftp2,result_exponent); + Dbl_set_sign(leftp1,/*using*/sign_save); + Dbl_setwrapped_exponent(leftp1,result_exponent,unfl); + Dbl_copytoptr(leftp1,leftp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + } + Dbl_copytoptr(leftp1,leftp2,dstptr); + return(NOEXCEPTION); + } + + /* Neither are zeroes */ + Dbl_clear_sign(rightp1); /* Exponent is already cleared */ + if(result_exponent == 0 ) + { + /* Both operands are denormalized. The result must be exact + * and is simply calculated. A sum could become normalized and a + * difference could cancel to a true zero. */ + if( (/*signed*/int) save >= 0 ) + { + Dbl_subtract(leftp1,leftp2,/*minus*/rightp1,rightp2, + /*into*/resultp1,resultp2); + if(Dbl_iszero_mantissa(resultp1,resultp2)) + { + if(Is_rounding_mode(ROUNDMINUS)) + { + Dbl_setone_sign(resultp1); + } + else + { + Dbl_setzero_sign(resultp1); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else + { + Dbl_addition(leftp1,leftp2,rightp1,rightp2, + /*into*/resultp1,resultp2); + if(Dbl_isone_hidden(resultp1)) + { + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + if(Is_underflowtrap_enabled()) + { + /* need to normalize result */ + sign_save = Dbl_signextendedsign(resultp1); + Dbl_leftshiftby1(resultp1,resultp2); + Dbl_normalize(resultp1,resultp2,result_exponent); + Dbl_set_sign(resultp1,/*using*/sign_save); + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + right_exponent = 1; /* Set exponent to reflect different bias + * with denomalized numbers. */ + } + else + { + Dbl_clear_signexponent_set_hidden(rightp1); + } + Dbl_clear_exponent_set_hidden(leftp1); + diff_exponent = result_exponent - right_exponent; + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for this + * infrequent case. + */ + if(diff_exponent > DBL_THRESHOLD) + { + diff_exponent = DBL_THRESHOLD; + } + + /* Align right operand by shifting to right */ + Dbl_right_align(/*operand*/rightp1,rightp2,/*shifted by*/diff_exponent, + /*and lower to*/extent); + + /* Treat sum and difference of the operands separately. */ + if( (/*signed*/int) save >= 0 ) + { + /* + * Difference of the two operands. Their can be no overflow. A + * borrow can occur out of the hidden bit and force a post + * normalization phase. + */ + Dbl_subtract_withextension(leftp1,leftp2,/*minus*/rightp1,rightp2, + /*with*/extent,/*into*/resultp1,resultp2); + if(Dbl_iszero_hidden(resultp1)) + { + /* Handle normalization */ + /* A straight foward algorithm would now shift the result + * and extension left until the hidden bit becomes one. Not + * all of the extension bits need participate in the shift. + * Only the two most significant bits (round and guard) are + * needed. If only a single shift is needed then the guard + * bit becomes a significant low order bit and the extension + * must participate in the rounding. If more than a single + * shift is needed, then all bits to the right of the guard + * bit are zeros, and the guard bit may or may not be zero. */ + sign_save = Dbl_signextendedsign(resultp1); + Dbl_leftshiftby1_withextent(resultp1,resultp2,extent,resultp1,resultp2); + + /* Need to check for a zero result. The sign and exponent + * fields have already been zeroed. The more efficient test + * of the full object can be used. + */ + if(Dbl_iszero(resultp1,resultp2)) + /* Must have been "x-x" or "x+(-x)". */ + { + if(Is_rounding_mode(ROUNDMINUS)) Dbl_setone_sign(resultp1); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + /* Look to see if normalization is finished. */ + if(Dbl_isone_hidden(resultp1)) + { + if(result_exponent==0) + { + /* Denormalized, exponent should be zero. Left operand * + * was normalized, so extent (guard, round) was zero */ + goto underflow; + } + else + { + /* No further normalization is needed. */ + Dbl_set_sign(resultp1,/*using*/sign_save); + Ext_leftshiftby1(extent); + goto round; + } + } + + /* Check for denormalized, exponent should be zero. Left * + * operand was normalized, so extent (guard, round) was zero */ + if(!(underflowtrap = Is_underflowtrap_enabled()) && + result_exponent==0) goto underflow; + + /* Shift extension to complete one bit of normalization and + * update exponent. */ + Ext_leftshiftby1(extent); + + /* Discover first one bit to determine shift amount. Use a + * modified binary search. We have already shifted the result + * one position right and still not found a one so the remainder + * of the extension must be zero and simplifies rounding. */ + /* Scan bytes */ + while(Dbl_iszero_hiddenhigh7mantissa(resultp1)) + { + Dbl_leftshiftby8(resultp1,resultp2); + if((result_exponent -= 8) <= 0 && !underflowtrap) + goto underflow; + } + /* Now narrow it down to the nibble */ + if(Dbl_iszero_hiddenhigh3mantissa(resultp1)) + { + /* The lower nibble contains the normalizing one */ + Dbl_leftshiftby4(resultp1,resultp2); + if((result_exponent -= 4) <= 0 && !underflowtrap) + goto underflow; + } + /* Select case were first bit is set (already normalized) + * otherwise select the proper shift. */ + if((jumpsize = Dbl_hiddenhigh3mantissa(resultp1)) > 7) + { + /* Already normalized */ + if(result_exponent <= 0) goto underflow; + Dbl_set_sign(resultp1,/*using*/sign_save); + Dbl_set_exponent(resultp1,/*using*/result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dbl_sethigh4bits(resultp1,/*using*/sign_save); + switch(jumpsize) + { + case 1: + { + Dbl_leftshiftby3(resultp1,resultp2); + result_exponent -= 3; + break; + } + case 2: + case 3: + { + Dbl_leftshiftby2(resultp1,resultp2); + result_exponent -= 2; + break; + } + case 4: + case 5: + case 6: + case 7: + { + Dbl_leftshiftby1(resultp1,resultp2); + result_exponent -= 1; + break; + } + } + if(result_exponent > 0) + { + Dbl_set_exponent(resultp1,/*using*/result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); /* Sign bit is already set */ + } + /* Fixup potential underflows */ + underflow: + if(Is_underflowtrap_enabled()) + { + Dbl_set_sign(resultp1,sign_save); + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + /* + * Since we cannot get an inexact denormalized result, + * we can now return. + */ + Dbl_fix_overshift(resultp1,resultp2,(1-result_exponent),extent); + Dbl_clear_signexponent(resultp1); + Dbl_set_sign(resultp1,sign_save); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } /* end if(hidden...)... */ + /* Fall through and round */ + } /* end if(save >= 0)... */ + else + { + /* Subtract magnitudes */ + Dbl_addition(leftp1,leftp2,rightp1,rightp2,/*to*/resultp1,resultp2); + if(Dbl_isone_hiddenoverflow(resultp1)) + { + /* Prenormalization required. */ + Dbl_rightshiftby1_withextent(resultp2,extent,extent); + Dbl_arithrightshiftby1(resultp1,resultp2); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...subtract magnitudes... */ + + /* Round the result. If the extension is all zeros,then the result is + * exact. Otherwise round in the correct direction. No underflow is + * possible. If a postnormalization is necessary, then the mantissa is + * all zeros so no shift is needed. */ + round: + if(Ext_isnotzero(extent)) + { + inexact = TRUE; + switch(Rounding_mode()) + { + case ROUNDNEAREST: /* The default. */ + if(Ext_isone_sign(extent)) + { + /* at least 1/2 ulp */ + if(Ext_isnotzero_lower(extent) || + Dbl_isone_lowmantissap2(resultp2)) + { + /* either exactly half way and odd or more than 1/2ulp */ + Dbl_increment(resultp1,resultp2); + } + } + break; + + case ROUNDPLUS: + if(Dbl_iszero_sign(resultp1)) + { + /* Round up positive results */ + Dbl_increment(resultp1,resultp2); + } + break; + + case ROUNDMINUS: + if(Dbl_isone_sign(resultp1)) + { + /* Round down negative results */ + Dbl_increment(resultp1,resultp2); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if(Dbl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if(result_exponent == DBL_INFINITY_EXPONENT) + { + /* Overflow */ + if(Is_overflowtrap_enabled()) + { + Dbl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + else + { + inexact = TRUE; + Set_overflowflag(); + Dbl_setoverflow(resultp1,resultp2); + } + } + else Dbl_set_exponent(resultp1,result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if(inexact) + if(Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); + } diff --git a/arch/parisc/math-emu/driver.c b/arch/parisc/math-emu/driver.c new file mode 100644 index 000000000000..09ef4136c693 --- /dev/null +++ b/arch/parisc/math-emu/driver.c @@ -0,0 +1,128 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * linux/arch/math-emu/driver.c.c + * + * decodes and dispatches unimplemented FPU instructions + * + * Copyright (C) 1999, 2000 Philipp Rumpf + * Copyright (C) 2001 Hewlett-Packard + */ + +#include +#include "float.h" +#include "math-emu.h" + + +#define fptpos 31 +#define fpr1pos 10 +#define extru(r,pos,len) (((r) >> (31-(pos))) & (( 1 << (len)) - 1)) + +#define FPUDEBUG 0 + +/* Format of the floating-point exception registers. */ +struct exc_reg { + unsigned int exception : 6; + unsigned int ei : 26; +}; + +/* Macros for grabbing bits of the instruction format from the 'ei' + field above. */ +/* Major opcode 0c and 0e */ +#define FP0CE_UID(i) (((i) >> 6) & 3) +#define FP0CE_CLASS(i) (((i) >> 9) & 3) +#define FP0CE_SUBOP(i) (((i) >> 13) & 7) +#define FP0CE_SUBOP1(i) (((i) >> 15) & 7) /* Class 1 subopcode */ +#define FP0C_FORMAT(i) (((i) >> 11) & 3) +#define FP0E_FORMAT(i) (((i) >> 11) & 1) + +/* Major opcode 0c, uid 2 (performance monitoring) */ +#define FPPM_SUBOP(i) (((i) >> 9) & 0x1f) + +/* Major opcode 2e (fused operations). */ +#define FP2E_SUBOP(i) (((i) >> 5) & 1) +#define FP2E_FORMAT(i) (((i) >> 11) & 1) + +/* Major opcode 26 (FMPYSUB) */ +/* Major opcode 06 (FMPYADD) */ +#define FPx6_FORMAT(i) ((i) & 0x1f) + +/* Flags and enable bits of the status word. */ +#define FPSW_FLAGS(w) ((w) >> 27) +#define FPSW_ENABLE(w) ((w) & 0x1f) +#define FPSW_V (1<<4) +#define FPSW_Z (1<<3) +#define FPSW_O (1<<2) +#define FPSW_U (1<<1) +#define FPSW_I (1<<0) + +/* Handle a floating point exception. Return zero if the faulting + instruction can be completed successfully. */ +int +handle_fpe(struct pt_regs *regs) +{ + extern void printbinary(unsigned long x, int nbits); + struct siginfo si; + unsigned int orig_sw, sw; + int signalcode; + /* need an intermediate copy of float regs because FPU emulation + * code expects an artificial last entry which contains zero + * + * also, the passed in fr registers contain one word that defines + * the fpu type. the fpu type information is constructed + * inside the emulation code + */ + __u64 frcopy[36]; + + memcpy(frcopy, regs->fr, sizeof regs->fr); + frcopy[32] = 0; + + memcpy(&orig_sw, frcopy, sizeof(orig_sw)); + + if (FPUDEBUG) { + printk(KERN_DEBUG "FP VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI ->\n "); + printbinary(orig_sw, 32); + printk(KERN_DEBUG "\n"); + } + + signalcode = decode_fpu(frcopy, 0x666); + + /* Status word = FR0L. */ + memcpy(&sw, frcopy, sizeof(sw)); + if (FPUDEBUG) { + printk(KERN_DEBUG "VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI decode_fpu returns %d|0x%x\n", + signalcode >> 24, signalcode & 0xffffff); + printbinary(sw, 32); + printk(KERN_DEBUG "\n"); + } + + memcpy(regs->fr, frcopy, sizeof regs->fr); + if (signalcode != 0) { + si.si_signo = signalcode >> 24; + si.si_errno = 0; + si.si_code = signalcode & 0xffffff; + si.si_addr = (void __user *) regs->iaoq[0]; + force_sig_info(si.si_signo, &si, current); + return -1; + } + + return signalcode ? -1 : 0; +} diff --git a/arch/parisc/math-emu/fcnvff.c b/arch/parisc/math-emu/fcnvff.c new file mode 100644 index 000000000000..76c063f7d17c --- /dev/null +++ b/arch/parisc/math-emu/fcnvff.c @@ -0,0 +1,309 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvff.c $Revision: 1.1 $ + * + * Purpose: + * Single Floating-point to Double Floating-point + * Double Floating-point to Single Floating-point + * + * External Interfaces: + * dbl_to_sgl_fcnvff(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvff(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/* + * Single Floating-point to Double Floating-point + */ +/*ARGSUSED*/ +int +sgl_to_dbl_fcnvff( + sgl_floating_point *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int src, resultp1, resultp2; + register int src_exponent; + + src = *srcptr; + src_exponent = Sgl_exponent(src); + Dbl_allp1(resultp1) = Sgl_all(src); /* set sign of result */ + /* + * Test for NaN or infinity + */ + if (src_exponent == SGL_INFINITY_EXPONENT) { + /* + * determine if NaN or infinity + */ + if (Sgl_iszero_mantissa(src)) { + /* + * is infinity; want to return double infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(src)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + else { + Set_invalidflag(); + Sgl_set_quiet(src); + } + } + /* + * NaN is quiet, return as double NaN + */ + Dbl_setinfinity_exponent(resultp1); + Sgl_to_dbl_mantissa(src,resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + /* + * Test for zero or denormalized + */ + if (src_exponent == 0) { + /* + * determine if zero or denormalized + */ + if (Sgl_isnotzero_mantissa(src)) { + /* + * is denormalized; want to normalize + */ + Sgl_clear_signexponent(src); + Sgl_leftshiftby1(src); + Sgl_normalize(src,src_exponent); + Sgl_to_dbl_exponent(src_exponent,resultp1); + Sgl_to_dbl_mantissa(src,resultp1,resultp2); + } + else { + Dbl_setzero_exponentmantissa(resultp1,resultp2); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * No special cases, just complete the conversion + */ + Sgl_to_dbl_exponent(src_exponent, resultp1); + Sgl_to_dbl_mantissa(Sgl_mantissa(src), resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Single Floating-point + */ +/*ARGSUSED*/ +int +dbl_to_sgl_fcnvff( + dbl_floating_point *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int srcp1, srcp2, result; + register int src_exponent, dest_exponent, dest_mantissa; + register boolean inexact = FALSE, guardbit = FALSE, stickybit = FALSE; + register boolean lsb_odd = FALSE; + boolean is_tiny; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1); + Sgl_all(result) = Dbl_allp1(srcp1); /* set sign of result */ + /* + * Test for NaN or infinity + */ + if (src_exponent == DBL_INFINITY_EXPONENT) { + /* + * determine if NaN or infinity + */ + if (Dbl_iszero_mantissa(srcp1,srcp2)) { + /* + * is infinity; want to return single infinity + */ + Sgl_setinfinity_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(srcp1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + else { + Set_invalidflag(); + /* make NaN quiet */ + Dbl_set_quiet(srcp1); + } + } + /* + * NaN is quiet, return as single NaN + */ + Sgl_setinfinity_exponent(result); + Sgl_set_mantissa(result,Dallp1(srcp1)<<3 | Dallp2(srcp2)>>29); + if (Sgl_iszero_mantissa(result)) Sgl_set_quiet(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate result + */ + Dbl_to_sgl_exponent(src_exponent,dest_exponent); + if (dest_exponent > 0) { + Dbl_to_sgl_mantissa(srcp1,srcp2,dest_mantissa,inexact,guardbit, + stickybit,lsb_odd); + } + else { + if (Dbl_iszero_exponentmantissa(srcp1,srcp2)){ + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + if (Is_underflowtrap_enabled()) { + Dbl_to_sgl_mantissa(srcp1,srcp2,dest_mantissa,inexact, + guardbit,stickybit,lsb_odd); + } + else { + /* compute result, determine inexact info, + * and set Underflowflag if appropriate + */ + Dbl_to_sgl_denormalized(srcp1,srcp2,dest_exponent, + dest_mantissa,inexact,guardbit,stickybit,lsb_odd, + is_tiny); + } + } + /* + * Now round result if not exact + */ + if (inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) dest_mantissa++; + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) dest_mantissa++; + break; + case ROUNDNEAREST: + if (guardbit) { + if (stickybit || lsb_odd) dest_mantissa++; + } + } + } + Sgl_set_exponentmantissa(result,dest_mantissa); + + /* + * check for mantissa overflow after rounding + */ + if ((dest_exponent>0 || Is_underflowtrap_enabled()) && + Sgl_isone_hidden(result)) dest_exponent++; + + /* + * Test for overflow + */ + if (dest_exponent >= SGL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Check for gross overflow + */ + if (dest_exponent >= SGL_INFINITY_EXPONENT+SGL_WRAP) + return(UNIMPLEMENTEDEXCEPTION); + + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,ovfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION|INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + Set_overflowflag(); + inexact = TRUE; + /* set result to infinity or largest number */ + Sgl_setoverflow(result); + } + /* + * Test for underflow + */ + else if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Check for gross underflow + */ + if (dest_exponent <= -(SGL_WRAP)) + return(UNIMPLEMENTEDEXCEPTION); + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,unfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(UNDERFLOWEXCEPTION|INEXACTEXCEPTION); + else Set_inexactflag(); + return(UNDERFLOWEXCEPTION); + } + /* + * result is denormalized or signed zero + */ + if (inexact && is_tiny) Set_underflowflag(); + + } + else Sgl_set_exponent(result,dest_exponent); + *dstptr = result; + /* + * Trap if inexact trap is enabled + */ + if (inexact) + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/fcnvfu.c b/arch/parisc/math-emu/fcnvfu.c new file mode 100644 index 000000000000..7e8565537bf5 --- /dev/null +++ b/arch/parisc/math-emu/fcnvfu.c @@ -0,0 +1,536 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvfu.c $Revision: 1.1 $ + * + * Purpose: + * Floating-point to Unsigned Fixed-point Converts + * + * External Interfaces: + * dbl_to_dbl_fcnvfu(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvfu(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvfu(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvfu(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/************************************************************************ + * Floating-point to Unsigned Fixed-point Converts * + ************************************************************************/ + +/* + * Single Floating-point to Single Unsigned Fixed + */ +/*ARGSUSED*/ +int +sgl_to_sgl_fcnvfu( + sgl_floating_point *srcptr, + unsigned int *nullptr, + unsigned int *dstptr, + unsigned int *status) +{ + register unsigned int src, result; + register int src_exponent; + register boolean inexact = FALSE; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP + 1) { + if (Sgl_isone_sign(src)) { + result = 0; + } else { + result = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Sgl_isone_sign(src)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + Sgl_clear_signexponent_set_hidden(src); + Suint_from_sgl_mantissa(src,src_exponent,result); + + /* check for inexact */ + if (Sgl_isinexact_to_unsigned(src,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + result++; + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + if (Sgl_isone_roundbit(src,src_exponent) && + (Sgl_isone_stickybit(src,src_exponent) || + (result & 1))) { + result++; + } + break; + } + } + } else { + result = 0; + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) { + result++; + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + break; + case ROUNDNEAREST: + if (src_exponent == -1 && + Sgl_isnotzero_mantissa(src)) { + if (Sgl_isone_sign(src)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + else result++; + } + break; + } + } + } + *dstptr = result; + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Single Floating-point to Double Unsigned Fixed + */ +/*ARGSUSED*/ +int +sgl_to_dbl_fcnvfu( + sgl_floating_point *srcptr, + unsigned int *nullptr, + dbl_unsigned *dstptr, + unsigned int *status) +{ + register int src_exponent; + register unsigned int src, resultp1, resultp2; + register boolean inexact = FALSE; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP + 1) { + if (Sgl_isone_sign(src)) { + resultp1 = resultp2 = 0; + } else { + resultp1 = resultp2 = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Sgl_isone_sign(src)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Sgl_clear_signexponent_set_hidden(src); + Duint_from_sgl_mantissa(src,src_exponent,resultp1,resultp2); + + /* check for inexact */ + if (Sgl_isinexact_to_unsigned(src,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + Duint_increment(resultp1,resultp2); + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + if (Sgl_isone_roundbit(src,src_exponent) && + (Sgl_isone_stickybit(src,src_exponent) || + Duint_isone_lowp2(resultp2))) { + Duint_increment(resultp1,resultp2); + } + break; + } + } + } else { + Duint_setzero(resultp1,resultp2); + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) { + Duint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + break; + case ROUNDNEAREST: + if (src_exponent == -1 && + Sgl_isnotzero_mantissa(src)) { + if (Sgl_isone_sign(src)) { + resultp1 = 0; + resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + else Duint_increment(resultp1,resultp2); + } + } + } + } + Duint_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Single Unsigned Fixed + */ +/*ARGSUSED*/ +int +dbl_to_sgl_fcnvfu (dbl_floating_point * srcptr, unsigned int *nullptr, + unsigned int *dstptr, unsigned int *status) +{ + register unsigned int srcp1, srcp2, result; + register int src_exponent; + register boolean inexact = FALSE; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP + 1) { + if (Dbl_isone_sign(srcp1)) { + result = 0; + } else { + result = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Dbl_isone_sign(srcp1)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + Dbl_clear_signexponent_set_hidden(srcp1); + Suint_from_dbl_mantissa(srcp1,srcp2,src_exponent,result); + + /* check for inexact */ + if (Dbl_isinexact_to_unsigned(srcp1,srcp2,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + result++; + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + if(Dbl_isone_roundbit(srcp1,srcp2,src_exponent) && + (Dbl_isone_stickybit(srcp1,srcp2,src_exponent)|| + result&1)) + result++; + break; + } + /* check for overflow */ + if (result == 0) { + result = 0xffffffff; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + } else { + result = 0; + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) result++; + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + break; + case ROUNDNEAREST: + if (src_exponent == -1 && + Dbl_isnotzero_mantissa(srcp1,srcp2)) + if (Dbl_isone_sign(srcp1)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + else result++; + } + } + } + *dstptr = result; + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Double Unsigned Fixed + */ +/*ARGSUSED*/ +int +dbl_to_dbl_fcnvfu (dbl_floating_point * srcptr, unsigned int *nullptr, + dbl_unsigned * dstptr, unsigned int *status) +{ + register int src_exponent; + register unsigned int srcp1, srcp2, resultp1, resultp2; + register boolean inexact = FALSE; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP + 1) { + if (Dbl_isone_sign(srcp1)) { + resultp1 = resultp2 = 0; + } else { + resultp1 = resultp2 = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Dbl_isone_sign(srcp1)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dbl_clear_signexponent_set_hidden(srcp1); + Duint_from_dbl_mantissa(srcp1,srcp2,src_exponent,resultp1, + resultp2); + + /* check for inexact */ + if (Dbl_isinexact_to_unsigned(srcp1,srcp2,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + Duint_increment(resultp1,resultp2); + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + if(Dbl_isone_roundbit(srcp1,srcp2,src_exponent)) + if(Dbl_isone_stickybit(srcp1,srcp2,src_exponent) || + Duint_isone_lowp2(resultp2)) + Duint_increment(resultp1,resultp2); + } + } + } else { + Duint_setzero(resultp1,resultp2); + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) { + Duint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + break; + case ROUNDNEAREST: + if (src_exponent == -1 && + Dbl_isnotzero_mantissa(srcp1,srcp2)) + if (Dbl_iszero_sign(srcp1)) { + Duint_increment(resultp1,resultp2); + } else { + resultp1 = 0; + resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + inexact = FALSE; + } + } + } + } + Duint_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + diff --git a/arch/parisc/math-emu/fcnvfut.c b/arch/parisc/math-emu/fcnvfut.c new file mode 100644 index 000000000000..4176a44ed750 --- /dev/null +++ b/arch/parisc/math-emu/fcnvfut.c @@ -0,0 +1,332 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvfut.c $Revision: 1.1 $ + * + * Purpose: + * Floating-point to Unsigned Fixed-point Converts with Truncation + * + * External Interfaces: + * dbl_to_dbl_fcnvfut(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvfut(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvfut(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvfut(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/************************************************************************ + * Floating-point to Unsigned Fixed-point Converts with Truncation * + ************************************************************************/ + +/* + * Convert single floating-point to single fixed-point format + * with truncated result + */ +/*ARGSUSED*/ +int +sgl_to_sgl_fcnvfut (sgl_floating_point * srcptr, unsigned int *nullptr, + unsigned int *dstptr, unsigned int *status) +{ + register unsigned int src, result; + register int src_exponent; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP + 1) { + if (Sgl_isone_sign(src)) { + result = 0; + } else { + result = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Sgl_isone_sign(src)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + Sgl_clear_signexponent_set_hidden(src); + Suint_from_sgl_mantissa(src,src_exponent,result); + *dstptr = result; + + /* check for inexact */ + if (Sgl_isinexact_to_unsigned(src,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + *dstptr = 0; + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Single Floating-point to Double Unsigned Fixed + */ +/*ARGSUSED*/ +int +sgl_to_dbl_fcnvfut (sgl_floating_point * srcptr, unsigned int *nullptr, + dbl_unsigned * dstptr, unsigned int *status) +{ + register int src_exponent; + register unsigned int src, resultp1, resultp2; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP + 1) { + if (Sgl_isone_sign(src)) { + resultp1 = resultp2 = 0; + } else { + resultp1 = resultp2 = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Sgl_isone_sign(src)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Sgl_clear_signexponent_set_hidden(src); + Duint_from_sgl_mantissa(src,src_exponent,resultp1,resultp2); + Duint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Sgl_isinexact_to_unsigned(src,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + Duint_setzero(resultp1,resultp2); + Duint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Single Unsigned Fixed + */ +/*ARGSUSED*/ +int +dbl_to_sgl_fcnvfut (dbl_floating_point * srcptr, unsigned int *nullptr, + unsigned int *dstptr, unsigned int *status) +{ + register unsigned int srcp1, srcp2, result; + register int src_exponent; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP + 1) { + if (Dbl_isone_sign(srcp1)) { + result = 0; + } else { + result = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Dbl_isone_sign(srcp1)) { + result = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + Dbl_clear_signexponent_set_hidden(srcp1); + Suint_from_dbl_mantissa(srcp1,srcp2,src_exponent,result); + *dstptr = result; + + /* check for inexact */ + if (Dbl_isinexact_to_unsigned(srcp1,srcp2,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + *dstptr = 0; + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Double Unsigned Fixed + */ +/*ARGSUSED*/ +int +dbl_to_dbl_fcnvfut (dbl_floating_point * srcptr, unsigned int *nullptr, + dbl_unsigned * dstptr, unsigned int *status) +{ + register int src_exponent; + register unsigned int srcp1, srcp2, resultp1, resultp2; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP + 1) { + if (Dbl_isone_sign(srcp1)) { + resultp1 = resultp2 = 0; + } else { + resultp1 = resultp2 = 0xffffffff; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + /* + * Check sign. + * If negative, trap unimplemented. + */ + if (Dbl_isone_sign(srcp1)) { + resultp1 = resultp2 = 0; + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Duint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dbl_clear_signexponent_set_hidden(srcp1); + Duint_from_dbl_mantissa(srcp1,srcp2,src_exponent, + resultp1,resultp2); + Duint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Dbl_isinexact_to_unsigned(srcp1,srcp2,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + Duint_setzero(resultp1,resultp2); + Duint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/fcnvfx.c b/arch/parisc/math-emu/fcnvfx.c new file mode 100644 index 000000000000..d6475bddb507 --- /dev/null +++ b/arch/parisc/math-emu/fcnvfx.c @@ -0,0 +1,501 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvfx.c $Revision: 1.1 $ + * + * Purpose: + * Single Floating-point to Single Fixed-point + * Single Floating-point to Double Fixed-point + * Double Floating-point to Single Fixed-point + * Double Floating-point to Double Fixed-point + * + * External Interfaces: + * dbl_to_dbl_fcnvfx(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvfx(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvfx(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvfx(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/* + * Single Floating-point to Single Fixed-point + */ +/*ARGSUSED*/ +int +sgl_to_sgl_fcnvfx( + sgl_floating_point *srcptr, + sgl_floating_point *nullptr, + int *dstptr, + sgl_floating_point *status) +{ + register unsigned int src, temp; + register int src_exponent, result; + register boolean inexact = FALSE; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > SGL_FX_MAX_EXP + 1) || + Sgl_isnotzero_mantissa(src) || Sgl_iszero_sign(src)) { + if (Sgl_iszero_sign(src)) result = 0x7fffffff; + else result = 0x80000000; + + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate result + */ + if (src_exponent >= 0) { + temp = src; + Sgl_clear_signexponent_set_hidden(temp); + Int_from_sgl_mantissa(temp,src_exponent); + if (Sgl_isone_sign(src)) result = -Sgl_all(temp); + else result = Sgl_all(temp); + + /* check for inexact */ + if (Sgl_isinexact_to_fix(src,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) result++; + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) result--; + break; + case ROUNDNEAREST: + if (Sgl_isone_roundbit(src,src_exponent)) { + if (Sgl_isone_stickybit(src,src_exponent) + || (Sgl_isone_lowmantissa(temp))) + if (Sgl_iszero_sign(src)) result++; + else result--; + } + } + } + } + else { + result = 0; + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) result++; + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) result--; + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Sgl_isnotzero_mantissa(src)) + if (Sgl_iszero_sign(src)) result++; + else result--; + } + } + } + *dstptr = result; + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Single Floating-point to Double Fixed-point + */ +/*ARGSUSED*/ +int +sgl_to_dbl_fcnvfx( + sgl_floating_point *srcptr, + unsigned int *nullptr, + dbl_integer *dstptr, + unsigned int *status) +{ + register int src_exponent, resultp1; + register unsigned int src, temp, resultp2; + register boolean inexact = FALSE; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > DBL_FX_MAX_EXP + 1) || + Sgl_isnotzero_mantissa(src) || Sgl_iszero_sign(src)) { + if (Sgl_iszero_sign(src)) { + resultp1 = 0x7fffffff; + resultp2 = 0xffffffff; + } + else { + resultp1 = 0x80000000; + resultp2 = 0; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dint_set_minint(resultp1,resultp2); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + temp = src; + Sgl_clear_signexponent_set_hidden(temp); + Dint_from_sgl_mantissa(temp,src_exponent,resultp1,resultp2); + if (Sgl_isone_sign(src)) { + Dint_setone_sign(resultp1,resultp2); + } + + /* check for inexact */ + if (Sgl_isinexact_to_fix(src,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) { + Dint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) { + Dint_decrement(resultp1,resultp2); + } + break; + case ROUNDNEAREST: + if (Sgl_isone_roundbit(src,src_exponent)) + if (Sgl_isone_stickybit(src,src_exponent) || + (Dint_isone_lowp2(resultp2))) + if (Sgl_iszero_sign(src)) { + Dint_increment(resultp1,resultp2); + } + else { + Dint_decrement(resultp1,resultp2); + } + } + } + } + else { + Dint_setzero(resultp1,resultp2); + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) { + Dint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) { + Dint_decrement(resultp1,resultp2); + } + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Sgl_isnotzero_mantissa(src)) + if (Sgl_iszero_sign(src)) { + Dint_increment(resultp1,resultp2); + } + else { + Dint_decrement(resultp1,resultp2); + } + } + } + } + Dint_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Single Fixed-point + */ +/*ARGSUSED*/ +int +dbl_to_sgl_fcnvfx( + dbl_floating_point *srcptr, + unsigned int *nullptr, + int *dstptr, + unsigned int *status) +{ + register unsigned int srcp1,srcp2, tempp1,tempp2; + register int src_exponent, result; + register boolean inexact = FALSE; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP) { + /* check for MININT */ + if (Dbl_isoverflow_to_int(src_exponent,srcp1,srcp2)) { + if (Dbl_iszero_sign(srcp1)) result = 0x7fffffff; + else result = 0x80000000; + + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate result + */ + if (src_exponent >= 0) { + tempp1 = srcp1; + tempp2 = srcp2; + Dbl_clear_signexponent_set_hidden(tempp1); + Int_from_dbl_mantissa(tempp1,tempp2,src_exponent); + if (Dbl_isone_sign(srcp1) && (src_exponent <= SGL_FX_MAX_EXP)) + result = -Dbl_allp1(tempp1); + else result = Dbl_allp1(tempp1); + + /* check for inexact */ + if (Dbl_isinexact_to_fix(srcp1,srcp2,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) result++; + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) result--; + break; + case ROUNDNEAREST: + if (Dbl_isone_roundbit(srcp1,srcp2,src_exponent)) + if (Dbl_isone_stickybit(srcp1,srcp2,src_exponent) || + (Dbl_isone_lowmantissap1(tempp1))) + if (Dbl_iszero_sign(srcp1)) result++; + else result--; + } + /* check for overflow */ + if ((Dbl_iszero_sign(srcp1) && result < 0) || + (Dbl_isone_sign(srcp1) && result > 0)) { + + if (Dbl_iszero_sign(srcp1)) result = 0x7fffffff; + else result = 0x80000000; + + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + } + else { + result = 0; + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) result++; + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) result--; + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Dbl_isnotzero_mantissa(srcp1,srcp2)) + if (Dbl_iszero_sign(srcp1)) result++; + else result--; + } + } + } + *dstptr = result; + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Double Fixed-point + */ +/*ARGSUSED*/ +int +dbl_to_dbl_fcnvfx( + dbl_floating_point *srcptr, + unsigned int *nullptr, + dbl_integer *dstptr, + unsigned int *status) +{ + register int src_exponent, resultp1; + register unsigned int srcp1, srcp2, tempp1, tempp2, resultp2; + register boolean inexact = FALSE; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > DBL_FX_MAX_EXP + 1) || + Dbl_isnotzero_mantissa(srcp1,srcp2) || Dbl_iszero_sign(srcp1)) { + if (Dbl_iszero_sign(srcp1)) { + resultp1 = 0x7fffffff; + resultp2 = 0xffffffff; + } + else { + resultp1 = 0x80000000; + resultp2 = 0; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * Generate result + */ + if (src_exponent >= 0) { + tempp1 = srcp1; + tempp2 = srcp2; + Dbl_clear_signexponent_set_hidden(tempp1); + Dint_from_dbl_mantissa(tempp1,tempp2,src_exponent,resultp1, + resultp2); + if (Dbl_isone_sign(srcp1)) { + Dint_setone_sign(resultp1,resultp2); + } + + /* check for inexact */ + if (Dbl_isinexact_to_fix(srcp1,srcp2,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) { + Dint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) { + Dint_decrement(resultp1,resultp2); + } + break; + case ROUNDNEAREST: + if (Dbl_isone_roundbit(srcp1,srcp2,src_exponent)) + if (Dbl_isone_stickybit(srcp1,srcp2,src_exponent) || + (Dint_isone_lowp2(resultp2))) + if (Dbl_iszero_sign(srcp1)) { + Dint_increment(resultp1,resultp2); + } + else { + Dint_decrement(resultp1,resultp2); + } + } + } + } + else { + Dint_setzero(resultp1,resultp2); + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) { + Dint_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) { + Dint_decrement(resultp1,resultp2); + } + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Dbl_isnotzero_mantissa(srcp1,srcp2)) + if (Dbl_iszero_sign(srcp1)) { + Dint_increment(resultp1,resultp2); + } + else { + Dint_decrement(resultp1,resultp2); + } + } + } + } + Dint_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/fcnvfxt.c b/arch/parisc/math-emu/fcnvfxt.c new file mode 100644 index 000000000000..8b9010c4690e --- /dev/null +++ b/arch/parisc/math-emu/fcnvfxt.c @@ -0,0 +1,328 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvfxt.c $Revision: 1.1 $ + * + * Purpose: + * Single Floating-point to Single Fixed-point /w truncated result + * Single Floating-point to Double Fixed-point /w truncated result + * Double Floating-point to Single Fixed-point /w truncated result + * Double Floating-point to Double Fixed-point /w truncated result + * + * External Interfaces: + * dbl_to_dbl_fcnvfxt(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvfxt(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvfxt(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvfxt(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/* + * Convert single floating-point to single fixed-point format + * with truncated result + */ +/*ARGSUSED*/ +int +sgl_to_sgl_fcnvfxt( + sgl_floating_point *srcptr, + unsigned int *nullptr, + int *dstptr, + unsigned int *status) +{ + register unsigned int src, temp; + register int src_exponent, result; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > SGL_FX_MAX_EXP + 1) || + Sgl_isnotzero_mantissa(src) || Sgl_iszero_sign(src)) { + if (Sgl_iszero_sign(src)) result = 0x7fffffff; + else result = 0x80000000; + + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate result + */ + if (src_exponent >= 0) { + temp = src; + Sgl_clear_signexponent_set_hidden(temp); + Int_from_sgl_mantissa(temp,src_exponent); + if (Sgl_isone_sign(src)) result = -Sgl_all(temp); + else result = Sgl_all(temp); + *dstptr = result; + + /* check for inexact */ + if (Sgl_isinexact_to_fix(src,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + *dstptr = 0; + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Single Floating-point to Double Fixed-point + */ +/*ARGSUSED*/ +int +sgl_to_dbl_fcnvfxt( + sgl_floating_point *srcptr, + unsigned int *nullptr, + dbl_integer *dstptr, + unsigned int *status) +{ + register int src_exponent, resultp1; + register unsigned int src, temp, resultp2; + + src = *srcptr; + src_exponent = Sgl_exponent(src) - SGL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > DBL_FX_MAX_EXP + 1) || + Sgl_isnotzero_mantissa(src) || Sgl_iszero_sign(src)) { + if (Sgl_iszero_sign(src)) { + resultp1 = 0x7fffffff; + resultp2 = 0xffffffff; + } + else { + resultp1 = 0x80000000; + resultp2 = 0; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + Dint_set_minint(resultp1,resultp2); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + temp = src; + Sgl_clear_signexponent_set_hidden(temp); + Dint_from_sgl_mantissa(temp,src_exponent,resultp1,resultp2); + if (Sgl_isone_sign(src)) { + Dint_setone_sign(resultp1,resultp2); + } + Dint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Sgl_isinexact_to_fix(src,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + Dint_setzero(resultp1,resultp2); + Dint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Single Fixed-point + */ +/*ARGSUSED*/ +int +dbl_to_sgl_fcnvfxt( + dbl_floating_point *srcptr, + unsigned int *nullptr, + int *dstptr, + unsigned int *status) +{ + register unsigned int srcp1, srcp2, tempp1, tempp2; + register int src_exponent, result; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > SGL_FX_MAX_EXP) { + /* check for MININT */ + if (Dbl_isoverflow_to_int(src_exponent,srcp1,srcp2)) { + if (Dbl_iszero_sign(srcp1)) result = 0x7fffffff; + else result = 0x80000000; + + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate result + */ + if (src_exponent >= 0) { + tempp1 = srcp1; + tempp2 = srcp2; + Dbl_clear_signexponent_set_hidden(tempp1); + Int_from_dbl_mantissa(tempp1,tempp2,src_exponent); + if (Dbl_isone_sign(srcp1) && (src_exponent <= SGL_FX_MAX_EXP)) + result = -Dbl_allp1(tempp1); + else result = Dbl_allp1(tempp1); + *dstptr = result; + + /* check for inexact */ + if (Dbl_isinexact_to_fix(srcp1,srcp2,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + *dstptr = 0; + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point to Double Fixed-point + */ +/*ARGSUSED*/ +int +dbl_to_dbl_fcnvfxt( + dbl_floating_point *srcptr, + unsigned int *nullptr, + dbl_integer *dstptr, + unsigned int *status) +{ + register int src_exponent, resultp1; + register unsigned int srcp1, srcp2, tempp1, tempp2, resultp2; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + src_exponent = Dbl_exponent(srcp1) - DBL_BIAS; + + /* + * Test for overflow + */ + if (src_exponent > DBL_FX_MAX_EXP) { + /* check for MININT */ + if ((src_exponent > DBL_FX_MAX_EXP + 1) || + Dbl_isnotzero_mantissa(srcp1,srcp2) || Dbl_iszero_sign(srcp1)) { + if (Dbl_iszero_sign(srcp1)) { + resultp1 = 0x7fffffff; + resultp2 = 0xffffffff; + } + else { + resultp1 = 0x80000000; + resultp2 = 0; + } + if (Is_invalidtrap_enabled()) { + return(INVALIDEXCEPTION); + } + Set_invalidflag(); + Dint_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + /* + * Generate result + */ + if (src_exponent >= 0) { + tempp1 = srcp1; + tempp2 = srcp2; + Dbl_clear_signexponent_set_hidden(tempp1); + Dint_from_dbl_mantissa(tempp1,tempp2,src_exponent, + resultp1,resultp2); + if (Dbl_isone_sign(srcp1)) { + Dint_setone_sign(resultp1,resultp2); + } + Dint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Dbl_isinexact_to_fix(srcp1,srcp2,src_exponent)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + else { + Dint_setzero(resultp1,resultp2); + Dint_copytoptr(resultp1,resultp2,dstptr); + + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/fcnvuf.c b/arch/parisc/math-emu/fcnvuf.c new file mode 100644 index 000000000000..5e68189fee22 --- /dev/null +++ b/arch/parisc/math-emu/fcnvuf.c @@ -0,0 +1,318 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvuf.c $Revision: 1.1 $ + * + * Purpose: + * Fixed point to Floating-point Converts + * + * External Interfaces: + * dbl_to_dbl_fcnvuf(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvuf(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvuf(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvuf(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/************************************************************************ + * Fixed point to Floating-point Converts * + ************************************************************************/ + +/* + * Convert Single Unsigned Fixed to Single Floating-point format + */ + +int +sgl_to_sgl_fcnvuf( + unsigned int *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int src, result = 0; + register int dst_exponent; + + src = *srcptr; + + /* Check for zero */ + if (src == 0) { + Sgl_setzero(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(src,dst_exponent); + /* left justify source, with msb at bit position 0 */ + src <<= dst_exponent+1; + Sgl_set_mantissa(result, src >> SGL_EXP_LENGTH); + Sgl_set_exponent(result, 30+SGL_BIAS - dst_exponent); + + /* check for inexact */ + if (Suint_isinexact_to_sgl(src)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + Sgl_increment(result); + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + Sgl_roundnearest_from_suint(src,result); + break; + } + if (Is_inexacttrap_enabled()) { + *dstptr = result; + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + *dstptr = result; + return(NOEXCEPTION); +} + +/* + * Single Unsigned Fixed to Double Floating-point + */ + +int +sgl_to_dbl_fcnvuf( + unsigned int *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register int dst_exponent; + register unsigned int src, resultp1 = 0, resultp2 = 0; + + src = *srcptr; + + /* Check for zero */ + if (src == 0) { + Dbl_setzero(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(src,dst_exponent); + /* left justify source, with msb at bit position 0 */ + src <<= dst_exponent+1; + Dbl_set_mantissap1(resultp1, src >> DBL_EXP_LENGTH); + Dbl_set_mantissap2(resultp2, src << (32-DBL_EXP_LENGTH)); + Dbl_set_exponent(resultp1, (30+DBL_BIAS) - dst_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} + +/* + * Double Unsigned Fixed to Single Floating-point + */ + +int +dbl_to_sgl_fcnvuf( + dbl_unsigned *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + int dst_exponent; + unsigned int srcp1, srcp2, result = 0; + + Duint_copyfromptr(srcptr,srcp1,srcp2); + + /* Check for zero */ + if (srcp1 == 0 && srcp2 == 0) { + Sgl_setzero(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + if (srcp1 == 0) { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp2,dst_exponent); + /* left justify source, with msb at bit position 0 */ + srcp1 = srcp2 << dst_exponent+1; + srcp2 = 0; + /* + * since msb set is in second word, need to + * adjust bit position count + */ + dst_exponent += 32; + } + else { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + * + */ + Find_ms_one_bit(srcp1,dst_exponent); + /* left justify source, with msb at bit position 0 */ + if (dst_exponent >= 0) { + Variable_shift_double(srcp1,srcp2,(31-dst_exponent), + srcp1); + srcp2 <<= dst_exponent+1; + } + } + Sgl_set_mantissa(result, srcp1 >> SGL_EXP_LENGTH); + Sgl_set_exponent(result, (62+SGL_BIAS) - dst_exponent); + + /* check for inexact */ + if (Duint_isinexact_to_sgl(srcp1,srcp2)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + Sgl_increment(result); + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + Sgl_roundnearest_from_duint(srcp1,srcp2,result); + break; + } + if (Is_inexacttrap_enabled()) { + *dstptr = result; + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + *dstptr = result; + return(NOEXCEPTION); +} + +/* + * Double Unsigned Fixed to Double Floating-point + */ + +int +dbl_to_dbl_fcnvuf( + dbl_unsigned *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register int dst_exponent; + register unsigned int srcp1, srcp2, resultp1 = 0, resultp2 = 0; + + Duint_copyfromptr(srcptr,srcp1,srcp2); + + /* Check for zero */ + if (srcp1 == 0 && srcp2 ==0) { + Dbl_setzero(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + if (srcp1 == 0) { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp2,dst_exponent); + /* left justify source, with msb at bit position 0 */ + srcp1 = srcp2 << dst_exponent+1; + srcp2 = 0; + /* + * since msb set is in second word, need to + * adjust bit position count + */ + dst_exponent += 32; + } + else { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp1,dst_exponent); + /* left justify source, with msb at bit position 0 */ + if (dst_exponent >= 0) { + Variable_shift_double(srcp1,srcp2,(31-dst_exponent), + srcp1); + srcp2 <<= dst_exponent+1; + } + } + Dbl_set_mantissap1(resultp1, srcp1 >> DBL_EXP_LENGTH); + Shiftdouble(srcp1,srcp2,DBL_EXP_LENGTH,resultp2); + Dbl_set_exponent(resultp1, (62+DBL_BIAS) - dst_exponent); + + /* check for inexact */ + if (Duint_isinexact_to_dbl(srcp2)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + Dbl_increment(resultp1,resultp2); + break; + case ROUNDMINUS: /* never negative */ + break; + case ROUNDNEAREST: + Dbl_roundnearest_from_duint(srcp2,resultp1, + resultp2); + break; + } + if (Is_inexacttrap_enabled()) { + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} + diff --git a/arch/parisc/math-emu/fcnvxf.c b/arch/parisc/math-emu/fcnvxf.c new file mode 100644 index 000000000000..05c7fadb3729 --- /dev/null +++ b/arch/parisc/math-emu/fcnvxf.c @@ -0,0 +1,386 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fcnvxf.c $Revision: 1.1 $ + * + * Purpose: + * Single Fixed-point to Single Floating-point + * Single Fixed-point to Double Floating-point + * Double Fixed-point to Single Floating-point + * Double Fixed-point to Double Floating-point + * + * External Interfaces: + * dbl_to_dbl_fcnvxf(srcptr,nullptr,dstptr,status) + * dbl_to_sgl_fcnvxf(srcptr,nullptr,dstptr,status) + * sgl_to_dbl_fcnvxf(srcptr,nullptr,dstptr,status) + * sgl_to_sgl_fcnvxf(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/* + * Convert single fixed-point to single floating-point format + */ + +int +sgl_to_sgl_fcnvxf( + int *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register int src, dst_exponent; + register unsigned int result = 0; + + src = *srcptr; + /* + * set sign bit of result and get magnitude of source + */ + if (src < 0) { + Sgl_setone_sign(result); + Int_negate(src); + } + else { + Sgl_setzero_sign(result); + /* Check for zero */ + if (src == 0) { + Sgl_setzero(result); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(src,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent >= 0) src <<= dst_exponent; + else src = 1 << 30; + Sgl_set_mantissa(result, src >> (SGL_EXP_LENGTH-1)); + Sgl_set_exponent(result, 30+SGL_BIAS - dst_exponent); + + /* check for inexact */ + if (Int_isinexact_to_sgl(src)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) + Sgl_increment(result); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) + Sgl_increment(result); + break; + case ROUNDNEAREST: + Sgl_roundnearest_from_int(src,result); + } + if (Is_inexacttrap_enabled()) { + *dstptr = result; + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + *dstptr = result; + return(NOEXCEPTION); +} + +/* + * Single Fixed-point to Double Floating-point + */ + +int +sgl_to_dbl_fcnvxf( + int *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register int src, dst_exponent; + register unsigned int resultp1 = 0, resultp2 = 0; + + src = *srcptr; + /* + * set sign bit of result and get magnitude of source + */ + if (src < 0) { + Dbl_setone_sign(resultp1); + Int_negate(src); + } + else { + Dbl_setzero_sign(resultp1); + /* Check for zero */ + if (src == 0) { + Dbl_setzero(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(src,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent >= 0) src <<= dst_exponent; + else src = 1 << 30; + Dbl_set_mantissap1(resultp1, src >> DBL_EXP_LENGTH - 1); + Dbl_set_mantissap2(resultp2, src << (33-DBL_EXP_LENGTH)); + Dbl_set_exponent(resultp1, (30+DBL_BIAS) - dst_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} + +/* + * Double Fixed-point to Single Floating-point + */ + +int +dbl_to_sgl_fcnvxf( + dbl_integer *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + int dst_exponent, srcp1; + unsigned int result = 0, srcp2; + + Dint_copyfromptr(srcptr,srcp1,srcp2); + /* + * set sign bit of result and get magnitude of source + */ + if (srcp1 < 0) { + Sgl_setone_sign(result); + Dint_negate(srcp1,srcp2); + } + else { + Sgl_setzero_sign(result); + /* Check for zero */ + if (srcp1 == 0 && srcp2 == 0) { + Sgl_setzero(result); + *dstptr = result; + return(NOEXCEPTION); + } + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + if (srcp1 == 0) { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp2,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent >= 0) { + srcp1 = srcp2 << dst_exponent; + srcp2 = 0; + } + else { + srcp1 = srcp2 >> 1; + srcp2 <<= 31; + } + /* + * since msb set is in second word, need to + * adjust bit position count + */ + dst_exponent += 32; + } + else { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + * + */ + Find_ms_one_bit(srcp1,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent > 0) { + Variable_shift_double(srcp1,srcp2,(32-dst_exponent), + srcp1); + srcp2 <<= dst_exponent; + } + /* + * If dst_exponent = 0, we don't need to shift anything. + * If dst_exponent = -1, src = - 2**63 so we won't need to + * shift srcp2. + */ + else srcp1 >>= -(dst_exponent); + } + Sgl_set_mantissa(result, srcp1 >> SGL_EXP_LENGTH - 1); + Sgl_set_exponent(result, (62+SGL_BIAS) - dst_exponent); + + /* check for inexact */ + if (Dint_isinexact_to_sgl(srcp1,srcp2)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) + Sgl_increment(result); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) + Sgl_increment(result); + break; + case ROUNDNEAREST: + Sgl_roundnearest_from_dint(srcp1,srcp2,result); + } + if (Is_inexacttrap_enabled()) { + *dstptr = result; + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + *dstptr = result; + return(NOEXCEPTION); +} + +/* + * Double Fixed-point to Double Floating-point + */ + +int +dbl_to_dbl_fcnvxf( + dbl_integer *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register int srcp1, dst_exponent; + register unsigned int srcp2, resultp1 = 0, resultp2 = 0; + + Dint_copyfromptr(srcptr,srcp1,srcp2); + /* + * set sign bit of result and get magnitude of source + */ + if (srcp1 < 0) { + Dbl_setone_sign(resultp1); + Dint_negate(srcp1,srcp2); + } + else { + Dbl_setzero_sign(resultp1); + /* Check for zero */ + if (srcp1 == 0 && srcp2 ==0) { + Dbl_setzero(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + /* + * Generate exponent and normalized mantissa + */ + dst_exponent = 16; /* initialize for normalization */ + if (srcp1 == 0) { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp2,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent >= 0) { + srcp1 = srcp2 << dst_exponent; + srcp2 = 0; + } + else { + srcp1 = srcp2 >> 1; + srcp2 <<= 31; + } + /* + * since msb set is in second word, need to + * adjust bit position count + */ + dst_exponent += 32; + } + else { + /* + * Check word for most significant bit set. Returns + * a value in dst_exponent indicating the bit position, + * between -1 and 30. + */ + Find_ms_one_bit(srcp1,dst_exponent); + /* left justify source, with msb at bit position 1 */ + if (dst_exponent > 0) { + Variable_shift_double(srcp1,srcp2,(32-dst_exponent), + srcp1); + srcp2 <<= dst_exponent; + } + /* + * If dst_exponent = 0, we don't need to shift anything. + * If dst_exponent = -1, src = - 2**63 so we won't need to + * shift srcp2. + */ + else srcp1 >>= -(dst_exponent); + } + Dbl_set_mantissap1(resultp1, srcp1 >> (DBL_EXP_LENGTH-1)); + Shiftdouble(srcp1,srcp2,DBL_EXP_LENGTH-1,resultp2); + Dbl_set_exponent(resultp1, (62+DBL_BIAS) - dst_exponent); + + /* check for inexact */ + if (Dint_isinexact_to_dbl(srcp2)) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + Dbl_increment(resultp1,resultp2); + } + break; + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + Dbl_increment(resultp1,resultp2); + } + break; + case ROUNDNEAREST: + Dbl_roundnearest_from_dint(srcp2,resultp1, + resultp2); + } + if (Is_inexacttrap_enabled()) { + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/float.h b/arch/parisc/math-emu/float.h new file mode 100644 index 000000000000..ce76f6dfa25b --- /dev/null +++ b/arch/parisc/math-emu/float.h @@ -0,0 +1,582 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/float.h $Revision: 1.1 $ + * + * Purpose: + * <> + * + * BE header: no + * + * Shipped: yes + * /usr/conf/pa/spmath/float.h + * + * END_DESC +*/ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + +#include "fpbits.h" +#include "hppa.h" +/* + * Want to pick up the FPU capability flags, not the PDC structures. + * 'LOCORE' isn't really true in this case, but we don't want the C structures + * so it suits our purposes + */ +#define LOCORE +#include "fpu.h" + +/* + * Declare the basic structures for the 3 different + * floating-point precisions. + * + * Single number + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| exp | mantissa | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define Sall(object) (object) +#define Ssign(object) Bitfield_extract( 0, 1,object) +#define Ssignedsign(object) Bitfield_signed_extract( 0, 1,object) +#define Sexponent(object) Bitfield_extract( 1, 8,object) +#define Smantissa(object) Bitfield_mask( 9, 23,object) +#define Ssignaling(object) Bitfield_extract( 9, 1,object) +#define Ssignalingnan(object) Bitfield_extract( 1, 9,object) +#define Shigh2mantissa(object) Bitfield_extract( 9, 2,object) +#define Sexponentmantissa(object) Bitfield_mask( 1, 31,object) +#define Ssignexponent(object) Bitfield_extract( 0, 9,object) +#define Shidden(object) Bitfield_extract( 8, 1,object) +#define Shiddenoverflow(object) Bitfield_extract( 7, 1,object) +#define Shiddenhigh7mantissa(object) Bitfield_extract( 8, 8,object) +#define Shiddenhigh3mantissa(object) Bitfield_extract( 8, 4,object) +#define Slow(object) Bitfield_mask( 31, 1,object) +#define Slow4(object) Bitfield_mask( 28, 4,object) +#define Slow31(object) Bitfield_mask( 1, 31,object) +#define Shigh31(object) Bitfield_extract( 0, 31,object) +#define Ssignedhigh31(object) Bitfield_signed_extract( 0, 31,object) +#define Shigh4(object) Bitfield_extract( 0, 4,object) +#define Sbit24(object) Bitfield_extract( 24, 1,object) +#define Sbit28(object) Bitfield_extract( 28, 1,object) +#define Sbit29(object) Bitfield_extract( 29, 1,object) +#define Sbit30(object) Bitfield_extract( 30, 1,object) +#define Sbit31(object) Bitfield_mask( 31, 1,object) + +#define Deposit_ssign(object,value) Bitfield_deposit(value,0,1,object) +#define Deposit_sexponent(object,value) Bitfield_deposit(value,1,8,object) +#define Deposit_smantissa(object,value) Bitfield_deposit(value,9,23,object) +#define Deposit_shigh2mantissa(object,value) Bitfield_deposit(value,9,2,object) +#define Deposit_sexponentmantissa(object,value) \ + Bitfield_deposit(value,1,31,object) +#define Deposit_ssignexponent(object,value) Bitfield_deposit(value,0,9,object) +#define Deposit_slow(object,value) Bitfield_deposit(value,31,1,object) +#define Deposit_shigh4(object,value) Bitfield_deposit(value,0,4,object) + +#define Is_ssign(object) Bitfield_mask( 0, 1,object) +#define Is_ssignaling(object) Bitfield_mask( 9, 1,object) +#define Is_shidden(object) Bitfield_mask( 8, 1,object) +#define Is_shiddenoverflow(object) Bitfield_mask( 7, 1,object) +#define Is_slow(object) Bitfield_mask( 31, 1,object) +#define Is_sbit24(object) Bitfield_mask( 24, 1,object) +#define Is_sbit28(object) Bitfield_mask( 28, 1,object) +#define Is_sbit29(object) Bitfield_mask( 29, 1,object) +#define Is_sbit30(object) Bitfield_mask( 30, 1,object) +#define Is_sbit31(object) Bitfield_mask( 31, 1,object) + +/* + * Double number. + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| exponent | mantissa part 1 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | mantissa part 2 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define Dallp1(object) (object) +#define Dsign(object) Bitfield_extract( 0, 1,object) +#define Dsignedsign(object) Bitfield_signed_extract( 0, 1,object) +#define Dexponent(object) Bitfield_extract( 1, 11,object) +#define Dmantissap1(object) Bitfield_mask( 12, 20,object) +#define Dsignaling(object) Bitfield_extract( 12, 1,object) +#define Dsignalingnan(object) Bitfield_extract( 1, 12,object) +#define Dhigh2mantissa(object) Bitfield_extract( 12, 2,object) +#define Dexponentmantissap1(object) Bitfield_mask( 1, 31,object) +#define Dsignexponent(object) Bitfield_extract( 0, 12,object) +#define Dhidden(object) Bitfield_extract( 11, 1,object) +#define Dhiddenoverflow(object) Bitfield_extract( 10, 1,object) +#define Dhiddenhigh7mantissa(object) Bitfield_extract( 11, 8,object) +#define Dhiddenhigh3mantissa(object) Bitfield_extract( 11, 4,object) +#define Dlowp1(object) Bitfield_mask( 31, 1,object) +#define Dlow31p1(object) Bitfield_mask( 1, 31,object) +#define Dhighp1(object) Bitfield_extract( 0, 1,object) +#define Dhigh4p1(object) Bitfield_extract( 0, 4,object) +#define Dhigh31p1(object) Bitfield_extract( 0, 31,object) +#define Dsignedhigh31p1(object) Bitfield_signed_extract( 0, 31,object) +#define Dbit3p1(object) Bitfield_extract( 3, 1,object) + +#define Deposit_dsign(object,value) Bitfield_deposit(value,0,1,object) +#define Deposit_dexponent(object,value) Bitfield_deposit(value,1,11,object) +#define Deposit_dmantissap1(object,value) Bitfield_deposit(value,12,20,object) +#define Deposit_dhigh2mantissa(object,value) Bitfield_deposit(value,12,2,object) +#define Deposit_dexponentmantissap1(object,value) \ + Bitfield_deposit(value,1,31,object) +#define Deposit_dsignexponent(object,value) Bitfield_deposit(value,0,12,object) +#define Deposit_dlowp1(object,value) Bitfield_deposit(value,31,1,object) +#define Deposit_dhigh4p1(object,value) Bitfield_deposit(value,0,4,object) + +#define Is_dsign(object) Bitfield_mask( 0, 1,object) +#define Is_dsignaling(object) Bitfield_mask( 12, 1,object) +#define Is_dhidden(object) Bitfield_mask( 11, 1,object) +#define Is_dhiddenoverflow(object) Bitfield_mask( 10, 1,object) +#define Is_dlowp1(object) Bitfield_mask( 31, 1,object) +#define Is_dhighp1(object) Bitfield_mask( 0, 1,object) +#define Is_dbit3p1(object) Bitfield_mask( 3, 1,object) + +#define Dallp2(object) (object) +#define Dmantissap2(object) (object) +#define Dlowp2(object) Bitfield_mask( 31, 1,object) +#define Dlow4p2(object) Bitfield_mask( 28, 4,object) +#define Dlow31p2(object) Bitfield_mask( 1, 31,object) +#define Dhighp2(object) Bitfield_extract( 0, 1,object) +#define Dhigh31p2(object) Bitfield_extract( 0, 31,object) +#define Dbit2p2(object) Bitfield_extract( 2, 1,object) +#define Dbit3p2(object) Bitfield_extract( 3, 1,object) +#define Dbit21p2(object) Bitfield_extract( 21, 1,object) +#define Dbit28p2(object) Bitfield_extract( 28, 1,object) +#define Dbit29p2(object) Bitfield_extract( 29, 1,object) +#define Dbit30p2(object) Bitfield_extract( 30, 1,object) +#define Dbit31p2(object) Bitfield_mask( 31, 1,object) + +#define Deposit_dlowp2(object,value) Bitfield_deposit(value,31,1,object) + +#define Is_dlowp2(object) Bitfield_mask( 31, 1,object) +#define Is_dhighp2(object) Bitfield_mask( 0, 1,object) +#define Is_dbit2p2(object) Bitfield_mask( 2, 1,object) +#define Is_dbit3p2(object) Bitfield_mask( 3, 1,object) +#define Is_dbit21p2(object) Bitfield_mask( 21, 1,object) +#define Is_dbit28p2(object) Bitfield_mask( 28, 1,object) +#define Is_dbit29p2(object) Bitfield_mask( 29, 1,object) +#define Is_dbit30p2(object) Bitfield_mask( 30, 1,object) +#define Is_dbit31p2(object) Bitfield_mask( 31, 1,object) + +/* + * Quad number. + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| exponent | mantissa part 1 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | mantissa part 2 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | mantissa part 3 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | mantissa part 4 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +typedef struct + { + union + { + struct { unsigned qallp1; } u_qallp1; +/* Not needed for now... + Bitfield_extract( 0, 1,u_qsign,qsign) + Bitfield_signed_extract( 0, 1,u_qsignedsign,qsignedsign) + Bitfield_extract( 1, 15,u_qexponent,qexponent) + Bitfield_extract(16, 16,u_qmantissap1,qmantissap1) + Bitfield_extract(16, 1,u_qsignaling,qsignaling) + Bitfield_extract(1, 16,u_qsignalingnan,qsignalingnan) + Bitfield_extract(16, 2,u_qhigh2mantissa,qhigh2mantissa) + Bitfield_extract( 1, 31,u_qexponentmantissap1,qexponentmantissap1) + Bitfield_extract( 0, 16,u_qsignexponent,qsignexponent) + Bitfield_extract(15, 1,u_qhidden,qhidden) + Bitfield_extract(14, 1,u_qhiddenoverflow,qhiddenoverflow) + Bitfield_extract(15, 8,u_qhiddenhigh7mantissa,qhiddenhigh7mantissa) + Bitfield_extract(15, 4,u_qhiddenhigh3mantissa,qhiddenhigh3mantissa) + Bitfield_extract(31, 1,u_qlowp1,qlowp1) + Bitfield_extract( 1, 31,u_qlow31p1,qlow31p1) + Bitfield_extract( 0, 1,u_qhighp1,qhighp1) + Bitfield_extract( 0, 4,u_qhigh4p1,qhigh4p1) + Bitfield_extract( 0, 31,u_qhigh31p1,qhigh31p1) + */ + } quad_u1; + union + { + struct { unsigned qallp2; } u_qallp2; + /* Not needed for now... + Bitfield_extract(31, 1,u_qlowp2,qlowp2) + Bitfield_extract( 1, 31,u_qlow31p2,qlow31p2) + Bitfield_extract( 0, 1,u_qhighp2,qhighp2) + Bitfield_extract( 0, 31,u_qhigh31p2,qhigh31p2) + */ + } quad_u2; + union + { + struct { unsigned qallp3; } u_qallp3; + /* Not needed for now... + Bitfield_extract(31, 1,u_qlowp3,qlowp3) + Bitfield_extract( 1, 31,u_qlow31p3,qlow31p3) + Bitfield_extract( 0, 1,u_qhighp3,qhighp3) + Bitfield_extract( 0, 31,u_qhigh31p3,qhigh31p3) + */ + } quad_u3; + union + { + struct { unsigned qallp4; } u_qallp4; + /* Not need for now... + Bitfield_extract(31, 1,u_qlowp4,qlowp4) + Bitfield_extract( 1, 31,u_qlow31p4,qlow31p4) + Bitfield_extract( 0, 1,u_qhighp4,qhighp4) + Bitfield_extract( 0, 31,u_qhigh31p4,qhigh31p4) + */ + } quad_u4; + } quad_floating_point; + +/* Extension - An additional structure to hold the guard, round and + * sticky bits during computations. + */ +#define Extall(object) (object) +#define Extsign(object) Bitfield_extract( 0, 1,object) +#define Exthigh31(object) Bitfield_extract( 0, 31,object) +#define Extlow31(object) Bitfield_extract( 1, 31,object) +#define Extlow(object) Bitfield_extract( 31, 1,object) + +/* + * Single extended - The upper word is just like single precision, + * but one additional word of mantissa is needed. + */ +#define Sextallp1(object) (object) +#define Sextallp2(object) (object) +#define Sextlowp1(object) Bitfield_extract( 31, 1,object) +#define Sexthighp2(object) Bitfield_extract( 0, 1,object) +#define Sextlow31p2(object) Bitfield_extract( 1, 31,object) +#define Sexthiddenoverflow(object) Bitfield_extract( 4, 1,object) +#define Is_sexthiddenoverflow(object) Bitfield_mask( 4, 1,object) + +/* + * Double extended - The upper two words are just like double precision, + * but two additional words of mantissa are needed. + */ +#define Dextallp1(object) (object) +#define Dextallp2(object) (object) +#define Dextallp3(object) (object) +#define Dextallp4(object) (object) +#define Dextlowp2(object) Bitfield_extract( 31, 1,object) +#define Dexthighp3(object) Bitfield_extract( 0, 1,object) +#define Dextlow31p3(object) Bitfield_extract( 1, 31,object) +#define Dexthiddenoverflow(object) Bitfield_extract( 10, 1,object) +#define Is_dexthiddenoverflow(object) Bitfield_mask( 10, 1,object) +#define Deposit_dextlowp4(object,value) Bitfield_deposit(value,31,1,object) + +/* + * Declare the basic structures for the 3 different + * fixed-point precisions. + * + * Single number + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| integer | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +typedef int sgl_integer; + +/* + * Double number. + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| high integer | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | low integer | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +struct dint { + int wd0; + unsigned int wd1; +}; + +struct dblwd { + unsigned int wd0; + unsigned int wd1; +}; + +/* + * Quad number. + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |s| integer part1 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | integer part 2 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | integer part 3 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | integer part 4 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ + +struct quadwd { + int wd0; + unsigned int wd1; + unsigned int wd2; + unsigned int wd3; +}; + +typedef struct quadwd quad_integer; + + +/* useful typedefs */ +typedef unsigned int sgl_floating_point; +typedef struct dblwd dbl_floating_point; +typedef struct dint dbl_integer; +typedef struct dblwd dbl_unsigned; + +/* + * Define the different precisions' parameters. + */ +#define SGL_BITLENGTH 32 +#define SGL_EMAX 127 +#define SGL_EMIN (-126) +#define SGL_BIAS 127 +#define SGL_WRAP 192 +#define SGL_INFINITY_EXPONENT (SGL_EMAX+SGL_BIAS+1) +#define SGL_THRESHOLD 32 +#define SGL_EXP_LENGTH 8 +#define SGL_P 24 + +#define DBL_BITLENGTH 64 +#define DBL_EMAX 1023 +#define DBL_EMIN (-1022) +#define DBL_BIAS 1023 +#define DBL_WRAP 1536 +#define DBL_INFINITY_EXPONENT (DBL_EMAX+DBL_BIAS+1) +#define DBL_THRESHOLD 64 +#define DBL_EXP_LENGTH 11 +#define DBL_P 53 + +#define QUAD_BITLENGTH 128 +#define QUAD_EMAX 16383 +#define QUAD_EMIN (-16382) +#define QUAD_BIAS 16383 +#define QUAD_WRAP 24576 +#define QUAD_INFINITY_EXPONENT (QUAD_EMAX+QUAD_BIAS+1) +#define QUAD_P 113 + +/* Boolean Values etc. */ +#define FALSE 0 +#define TRUE (!FALSE) +#define NOT ! +#define XOR ^ + +/* other constants */ +#undef NULL +#define NULL 0 +#define NIL 0 +#define SGL 0 +#define DBL 1 +#define BADFMT 2 +#define QUAD 3 + + +/* Types */ +typedef int boolean; +typedef int FORMAT; +typedef int VOID; + + +/* Declare status register equivalent to FPUs architecture. + * + * 0 1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 8 920 1 2 3 4 5 6 7 8 930 1 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |V|Z|O|U|I|C| rsv | model | version |RM |rsv|T|r|V|Z|O|U|I| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define Cbit(object) Bitfield_extract( 5, 1,object) +#define Tbit(object) Bitfield_extract( 25, 1,object) +#define Roundingmode(object) Bitfield_extract( 21, 2,object) +#define Invalidtrap(object) Bitfield_extract( 27, 1,object) +#define Divisionbyzerotrap(object) Bitfield_extract( 28, 1,object) +#define Overflowtrap(object) Bitfield_extract( 29, 1,object) +#define Underflowtrap(object) Bitfield_extract( 30, 1,object) +#define Inexacttrap(object) Bitfield_extract( 31, 1,object) +#define Invalidflag(object) Bitfield_extract( 0, 1,object) +#define Divisionbyzeroflag(object) Bitfield_extract( 1, 1,object) +#define Overflowflag(object) Bitfield_extract( 2, 1,object) +#define Underflowflag(object) Bitfield_extract( 3, 1,object) +#define Inexactflag(object) Bitfield_extract( 4, 1,object) +#define Allflags(object) Bitfield_extract( 0, 5,object) + +/* Definitions relevant to the status register */ + +/* Rounding Modes */ +#define ROUNDNEAREST 0 +#define ROUNDZERO 1 +#define ROUNDPLUS 2 +#define ROUNDMINUS 3 + +/* Exceptions */ +#define NOEXCEPTION 0x0 +#define INVALIDEXCEPTION 0x20 +#define DIVISIONBYZEROEXCEPTION 0x10 +#define OVERFLOWEXCEPTION 0x08 +#define UNDERFLOWEXCEPTION 0x04 +#define INEXACTEXCEPTION 0x02 +#define UNIMPLEMENTEDEXCEPTION 0x01 + +/* New exceptions for the 2E Opcode */ +#define OPC_2E_INVALIDEXCEPTION 0x30 +#define OPC_2E_OVERFLOWEXCEPTION 0x18 +#define OPC_2E_UNDERFLOWEXCEPTION 0x0c +#define OPC_2E_INEXACTEXCEPTION 0x12 + +/* Declare exception registers equivalent to FPUs architecture + * + * 0 1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 8 920 1 2 3 4 5 6 7 8 930 1 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * |excepttype | r1 | r2/ext | operation |parm |n| t/cond | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define Allexception(object) (object) +#define Exceptiontype(object) Bitfield_extract( 0, 6,object) +#define Instructionfield(object) Bitfield_mask( 6,26,object) +#define Parmfield(object) Bitfield_extract( 23, 3,object) +#define Rabit(object) Bitfield_extract( 24, 1,object) +#define Ibit(object) Bitfield_extract( 25, 1,object) + +#define Set_exceptiontype(object,value) Bitfield_deposit(value, 0, 6,object) +#define Set_parmfield(object,value) Bitfield_deposit(value, 23, 3,object) +#define Set_exceptiontype_and_instr_field(exception,instruction,object) \ + object = exception << 26 | instruction + +/* Declare the condition field + * + * 0 1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 8 920 1 2 3 4 5 6 7 8 930 1 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | |G|L|E|U|X| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define Allexception(object) (object) +#define Greaterthanbit(object) Bitfield_extract( 27, 1,object) +#define Lessthanbit(object) Bitfield_extract( 28, 1,object) +#define Equalbit(object) Bitfield_extract( 29, 1,object) +#define Unorderedbit(object) Bitfield_extract( 30, 1,object) +#define Exceptionbit(object) Bitfield_extract( 31, 1,object) + +/* An alias name for the status register */ +#define Fpustatus_register (*status) + +/************************************************** + * Status register referencing and manipulation. * + **************************************************/ + +/* Rounding mode */ +#define Rounding_mode() Roundingmode(Fpustatus_register) +#define Is_rounding_mode(rmode) \ + (Roundingmode(Fpustatus_register) == rmode) +#define Set_rounding_mode(value) \ + Bitfield_deposit(value,21,2,Fpustatus_register) + +/* Boolean testing of the trap enable bits */ +#define Is_invalidtrap_enabled() Invalidtrap(Fpustatus_register) +#define Is_divisionbyzerotrap_enabled() Divisionbyzerotrap(Fpustatus_register) +#define Is_overflowtrap_enabled() Overflowtrap(Fpustatus_register) +#define Is_underflowtrap_enabled() Underflowtrap(Fpustatus_register) +#define Is_inexacttrap_enabled() Inexacttrap(Fpustatus_register) + +/* Set the indicated flags in the status register */ +#define Set_invalidflag() Bitfield_deposit(1,0,1,Fpustatus_register) +#define Set_divisionbyzeroflag() Bitfield_deposit(1,1,1,Fpustatus_register) +#define Set_overflowflag() Bitfield_deposit(1,2,1,Fpustatus_register) +#define Set_underflowflag() Bitfield_deposit(1,3,1,Fpustatus_register) +#define Set_inexactflag() Bitfield_deposit(1,4,1,Fpustatus_register) + +#define Clear_all_flags() Bitfield_deposit(0,0,5,Fpustatus_register) + +/* Manipulate the trap and condition code bits (tbit and cbit) */ +#define Set_tbit() Bitfield_deposit(1,25,1,Fpustatus_register) +#define Clear_tbit() Bitfield_deposit(0,25,1,Fpustatus_register) +#define Is_tbit_set() Tbit(Fpustatus_register) +#define Is_cbit_set() Cbit(Fpustatus_register) + +#define Set_status_cbit(value) \ + Bitfield_deposit(value,5,1,Fpustatus_register) + +/******************************* + * Condition field referencing * + *******************************/ +#define Unordered(cond) Unorderedbit(cond) +#define Equal(cond) Equalbit(cond) +#define Lessthan(cond) Lessthanbit(cond) +#define Greaterthan(cond) Greaterthanbit(cond) +#define Exception(cond) Exceptionbit(cond) + + +/* Defines for the extension */ +#define Ext_isone_sign(extent) (Extsign(extent)) +#define Ext_isnotzero(extent) \ + (Extall(extent)) +#define Ext_isnotzero_lower(extent) \ + (Extlow31(extent)) +#define Ext_leftshiftby1(extent) \ + Extall(extent) <<= 1 +#define Ext_negate(extent) \ + (int )Extall(extent) = 0 - (int )Extall(extent) +#define Ext_setone_low(extent) Bitfield_deposit(1,31,1,extent) +#define Ext_setzero(extent) Extall(extent) = 0 + +typedef int operation; + +/* error messages */ + +#define NONE 0 +#define UNDEFFPINST 1 + +/* Function definitions: opcode, opclass */ +#define FTEST (1<<2) | 0 +#define FCPY (2<<2) | 0 +#define FABS (3<<2) | 0 +#define FSQRT (4<<2) | 0 +#define FRND (5<<2) | 0 + +#define FCNVFF (0<<2) | 1 +#define FCNVXF (1<<2) | 1 +#define FCNVFX (2<<2) | 1 +#define FCNVFXT (3<<2) | 1 + +#define FCMP (0<<2) | 2 + +#define FADD (0<<2) | 3 +#define FSUB (1<<2) | 3 +#define FMPY (2<<2) | 3 +#define FDIV (3<<2) | 3 +#define FREM (4<<2) | 3 + diff --git a/arch/parisc/math-emu/fmpyfadd.c b/arch/parisc/math-emu/fmpyfadd.c new file mode 100644 index 000000000000..5dd7f93a89be --- /dev/null +++ b/arch/parisc/math-emu/fmpyfadd.c @@ -0,0 +1,2655 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/fmpyfadd.c $Revision: 1.1 $ + * + * Purpose: + * Double Floating-point Multiply Fused Add + * Double Floating-point Multiply Negate Fused Add + * Single Floating-point Multiply Fused Add + * Single Floating-point Multiply Negate Fused Add + * + * External Interfaces: + * dbl_fmpyfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + * dbl_fmpynfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + * sgl_fmpyfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + * sgl_fmpynfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" + + +/* + * Double Floating-point Multiply Fused Add + */ + +int +dbl_fmpyfadd( + dbl_floating_point *src1ptr, + dbl_floating_point *src2ptr, + dbl_floating_point *src3ptr, + unsigned int *status, + dbl_floating_point *dstptr) +{ + unsigned int opnd1p1, opnd1p2, opnd2p1, opnd2p2, opnd3p1, opnd3p2; + register unsigned int tmpresp1, tmpresp2, tmpresp3, tmpresp4; + unsigned int rightp1, rightp2, rightp3, rightp4; + unsigned int resultp1, resultp2 = 0, resultp3 = 0, resultp4 = 0; + register int mpy_exponent, add_exponent, count; + boolean inexact = FALSE, is_tiny = FALSE; + + unsigned int signlessleft1, signlessright1, save; + register int result_exponent, diff_exponent; + int sign_save, jumpsize; + + Dbl_copyfromptr(src1ptr,opnd1p1,opnd1p2); + Dbl_copyfromptr(src2ptr,opnd2p1,opnd2p2); + Dbl_copyfromptr(src3ptr,opnd3p1,opnd3p2); + + /* + * set sign bit of result of multiply + */ + if (Dbl_sign(opnd1p1) ^ Dbl_sign(opnd2p1)) + Dbl_setnegativezerop1(resultp1); + else Dbl_setzerop1(resultp1); + + /* + * Generate multiply exponent + */ + mpy_exponent = Dbl_exponent(opnd1p1) + Dbl_exponent(opnd2p1) - DBL_BIAS; + + /* + * check first operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd1p1)) { + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + if (Dbl_isnotnan(opnd2p1,opnd2p2) && + Dbl_isnotnan(opnd3p1,opnd3p2)) { + if (Dbl_iszero_exponentmantissa(opnd2p1,opnd2p2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Dbl_isinfinity(opnd3p1,opnd3p2) && + (Dbl_sign(resultp1) ^ Dbl_sign(opnd3p1))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd1p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd1p1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * is third operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd2p1)) { + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + if (Dbl_isnotnan(opnd3p1,opnd3p2)) { + if (Dbl_iszero_exponentmantissa(opnd1p1,opnd1p2)) { + /* + * invalid since multiply operands are + * zero & infinity + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(opnd2p1,opnd2p2); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Dbl_isinfinity(opnd3p1,opnd3p2) && + (Dbl_sign(resultp1) ^ Dbl_sign(opnd3p1))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + } + /* + * is third operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check third operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd3p1)) { + if (Dbl_iszero_mantissa(opnd3p1,opnd3p2)) { + /* return infinity */ + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * Generate multiply mantissa + */ + if (Dbl_isnotzero_exponent(opnd1p1)) { + /* set hidden bit */ + Dbl_clear_signexponent_set_hidden(opnd1p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Dbl_iszero_exponentmantissa(opnd3p1,opnd3p2)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Dbl_or_signs(opnd3p1,resultp1); + } else { + Dbl_and_signs(opnd3p1,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Dbl_iszero_exponent(opnd3p1) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(opnd3p1); + result_exponent = 0; + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,result_exponent); + Dbl_set_sign(opnd3p1,/*using*/sign_save); + Dbl_setwrapped_exponent(opnd3p1,result_exponent, + unfl); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Dbl_clear_signexponent(opnd1p1); + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_normalize(opnd1p1,opnd1p2,mpy_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Dbl_isnotzero_exponent(opnd2p1)) { + Dbl_clear_signexponent_set_hidden(opnd2p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Dbl_iszero_exponentmantissa(opnd3p1,opnd3p2)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Dbl_or_signs(opnd3p1,resultp1); + } else { + Dbl_and_signs(opnd3p1,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Dbl_iszero_exponent(opnd3p1) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(opnd3p1); + result_exponent = 0; + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,result_exponent); + Dbl_set_sign(opnd3p1,/*using*/sign_save); + Dbl_setwrapped_exponent(opnd3p1,result_exponent, + unfl); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Dbl_clear_signexponent(opnd2p1); + Dbl_leftshiftby1(opnd2p1,opnd2p2); + Dbl_normalize(opnd2p1,opnd2p2,mpy_exponent); + } + + /* Multiply the first two source mantissas together */ + + /* + * The intermediate result will be kept in tmpres, + * which needs enough room for 106 bits of mantissa, + * so lets call it a Double extended. + */ + Dblext_setzero(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count = DBL_P-1; count >= 0; count -= 4) { + Dblext_rightshiftby4(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + if (Dbit28p2(opnd1p2)) { + /* Fourword_add should be an ADD followed by 3 ADDC's */ + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<3 | opnd2p2>>29, opnd2p2<<3, 0, 0); + } + if (Dbit29p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<2 | opnd2p2>>30, opnd2p2<<2, 0, 0); + } + if (Dbit30p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<1 | opnd2p2>>31, opnd2p2<<1, 0, 0); + } + if (Dbit31p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1, opnd2p2, 0, 0); + } + Dbl_rightshiftby4(opnd1p1,opnd1p2); + } + if (Is_dexthiddenoverflow(tmpresp1)) { + /* result mantissa >= 2 (mantissa overflow) */ + mpy_exponent++; + Dblext_rightshiftby1(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + } + + /* + * Restore the sign of the mpy result which was saved in resultp1. + * The exponent will continue to be kept in mpy_exponent. + */ + Dblext_set_sign(tmpresp1,Dbl_sign(resultp1)); + + /* + * No rounding is required, since the result of the multiply + * is exact in the extended format. + */ + + /* + * Now we are ready to perform the add portion of the operation. + * + * The exponents need to be kept as integers for now, since the + * multiply result might not fit into the exponent field. We + * can't overflow or underflow because of this yet, since the + * add could bring the final result back into range. + */ + add_exponent = Dbl_exponent(opnd3p1); + + /* + * Check for denormalized or zero add operand. + */ + if (add_exponent == 0) { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd3p1,opnd3p2)) { + /* right is zero */ + /* Left can't be zero and must be result. + * + * The final result is now in tmpres and mpy_exponent, + * and needs to be rounded and squeezed back into + * double precision format from double extended. + */ + result_exponent = mpy_exponent; + Dblext_copy(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1);/*save sign*/ + goto round; + } + + /* + * Neither are zeroes. + * Adjust exponent and normalize add operand. + */ + sign_save = Dbl_signextendedsign(opnd3p1); /* save sign */ + Dbl_clear_signexponent(opnd3p1); + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,add_exponent); + Dbl_set_sign(opnd3p1,sign_save); /* restore sign */ + } else { + Dbl_clear_exponent_set_hidden(opnd3p1); + } + /* + * Copy opnd3 to the double extended variable called right. + */ + Dbl_copyto_dblext(opnd3p1,opnd3p2,rightp1,rightp2,rightp3,rightp4); + + /* + * A zero "save" helps discover equal operands (for later), + * and is used in swapping operands (if needed). + */ + Dblext_xortointp1(tmpresp1,rightp1,/*to*/save); + + /* + * Compare magnitude of operands. + */ + Dblext_copytoint_exponentmantissap1(tmpresp1,signlessleft1); + Dblext_copytoint_exponentmantissap1(rightp1,signlessright1); + if (mpy_exponent < add_exponent || mpy_exponent == add_exponent && + Dblext_ismagnitudeless(tmpresp2,rightp2,signlessleft1,signlessright1)){ + /* + * Set the left operand to the larger one by XOR swap. + * First finish the first word "save". + */ + Dblext_xorfromintp1(save,rightp1,/*to*/rightp1); + Dblext_xorfromintp1(save,tmpresp1,/*to*/tmpresp1); + Dblext_swap_lower(tmpresp2,tmpresp3,tmpresp4, + rightp2,rightp3,rightp4); + /* also setup exponents used in rest of routine */ + diff_exponent = add_exponent - mpy_exponent; + result_exponent = add_exponent; + } else { + /* also setup exponents used in rest of routine */ + diff_exponent = mpy_exponent - add_exponent; + result_exponent = mpy_exponent; + } + /* Invariant: left is not smaller than right. */ + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for + * this infrequent case. + */ + if (diff_exponent > DBLEXT_THRESHOLD) { + diff_exponent = DBLEXT_THRESHOLD; + } + + /* Align right operand by shifting it to the right */ + Dblext_clear_sign(rightp1); + Dblext_right_align(rightp1,rightp2,rightp3,rightp4, + /*shifted by*/diff_exponent); + + /* Treat sum and difference of the operands separately. */ + if ((int)save < 0) { + /* + * Difference of the two operands. Overflow can occur if the + * multiply overflowed. A borrow can occur out of the hidden + * bit and force a post normalization phase. + */ + Dblext_subtract(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + rightp1,rightp2,rightp3,rightp4, + resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1); + if (Dbl_iszero_hidden(resultp1)) { + /* Handle normalization */ + /* A straight foward algorithm would now shift the + * result and extension left until the hidden bit + * becomes one. Not all of the extension bits need + * participate in the shift. Only the two most + * significant bits (round and guard) are needed. + * If only a single shift is needed then the guard + * bit becomes a significant low order bit and the + * extension must participate in the rounding. + * If more than a single shift is needed, then all + * bits to the right of the guard bit are zeros, + * and the guard bit may or may not be zero. */ + Dblext_leftshiftby1(resultp1,resultp2,resultp3, + resultp4); + + /* Need to check for a zero result. The sign and + * exponent fields have already been zeroed. The more + * efficient test of the full object can be used. + */ + if(Dblext_iszero(resultp1,resultp2,resultp3,resultp4)){ + /* Must have been "x-x" or "x+(-x)". */ + if (Is_rounding_mode(ROUNDMINUS)) + Dbl_setone_sign(resultp1); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + + /* Look to see if normalization is finished. */ + if (Dbl_isone_hidden(resultp1)) { + /* No further normalization is needed */ + goto round; + } + + /* Discover first one bit to determine shift amount. + * Use a modified binary search. We have already + * shifted the result one position right and still + * not found a one so the remainder of the extension + * must be zero and simplifies rounding. */ + /* Scan bytes */ + while (Dbl_iszero_hiddenhigh7mantissa(resultp1)) { + Dblext_leftshiftby8(resultp1,resultp2,resultp3,resultp4); + result_exponent -= 8; + } + /* Now narrow it down to the nibble */ + if (Dbl_iszero_hiddenhigh3mantissa(resultp1)) { + /* The lower nibble contains the + * normalizing one */ + Dblext_leftshiftby4(resultp1,resultp2,resultp3,resultp4); + result_exponent -= 4; + } + /* Select case where first bit is set (already + * normalized) otherwise select the proper shift. */ + jumpsize = Dbl_hiddenhigh3mantissa(resultp1); + if (jumpsize <= 7) switch(jumpsize) { + case 1: + Dblext_leftshiftby3(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 3; + break; + case 2: + case 3: + Dblext_leftshiftby2(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 2; + break; + case 4: + case 5: + case 6: + case 7: + Dblext_leftshiftby1(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 1; + break; + } + } /* end if (hidden...)... */ + /* Fall through and round */ + } /* end if (save < 0)... */ + else { + /* Add magnitudes */ + Dblext_addition(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + rightp1,rightp2,rightp3,rightp4, + /*to*/resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1); + if (Dbl_isone_hiddenoverflow(resultp1)) { + /* Prenormalization required. */ + Dblext_arithrightshiftby1(resultp1,resultp2,resultp3, + resultp4); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension and lower two words are + * all zeros, then the result is exact. Otherwise round in the + * correct direction. Underflow is possible. If a postnormalization + * is necessary, then the mantissa is all zeros so no shift is needed. + */ + round: + if (result_exponent <= 0 && !Is_underflowtrap_enabled()) { + Dblext_denormalize(resultp1,resultp2,resultp3,resultp4, + result_exponent,is_tiny); + } + Dbl_set_sign(resultp1,/*using*/sign_save); + if (Dblext_isnotzero_mantissap3(resultp3) || + Dblext_isnotzero_mantissap4(resultp4)) { + inexact = TRUE; + switch(Rounding_mode()) { + case ROUNDNEAREST: /* The default. */ + if (Dblext_isone_highp3(resultp3)) { + /* at least 1/2 ulp */ + if (Dblext_isnotzero_low31p3(resultp3) || + Dblext_isnotzero_mantissap4(resultp4) || + Dblext_isone_lowp2(resultp2)) { + /* either exactly half way and odd or + * more than 1/2ulp */ + Dbl_increment(resultp1,resultp2); + } + } + break; + + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + /* Round up positive results */ + Dbl_increment(resultp1,resultp2); + } + break; + + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + /* Round down negative results */ + Dbl_increment(resultp1,resultp2); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if (Dbl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if (result_exponent >= DBL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_OVERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return (OPC_2E_OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + /* set result to infinity or largest number */ + Dbl_setoverflow(resultp1,resultp2); + + } else if (result_exponent <= 0) { /* underflow case */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_UNDERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(OPC_2E_UNDERFLOWEXCEPTION); + } + else if (inexact && is_tiny) Set_underflowflag(); + } + else Dbl_set_exponent(resultp1,result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) return(OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} + +/* + * Double Floating-point Multiply Negate Fused Add + */ + +dbl_fmpynfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + +dbl_floating_point *src1ptr, *src2ptr, *src3ptr, *dstptr; +unsigned int *status; +{ + unsigned int opnd1p1, opnd1p2, opnd2p1, opnd2p2, opnd3p1, opnd3p2; + register unsigned int tmpresp1, tmpresp2, tmpresp3, tmpresp4; + unsigned int rightp1, rightp2, rightp3, rightp4; + unsigned int resultp1, resultp2 = 0, resultp3 = 0, resultp4 = 0; + register int mpy_exponent, add_exponent, count; + boolean inexact = FALSE, is_tiny = FALSE; + + unsigned int signlessleft1, signlessright1, save; + register int result_exponent, diff_exponent; + int sign_save, jumpsize; + + Dbl_copyfromptr(src1ptr,opnd1p1,opnd1p2); + Dbl_copyfromptr(src2ptr,opnd2p1,opnd2p2); + Dbl_copyfromptr(src3ptr,opnd3p1,opnd3p2); + + /* + * set sign bit of result of multiply + */ + if (Dbl_sign(opnd1p1) ^ Dbl_sign(opnd2p1)) + Dbl_setzerop1(resultp1); + else + Dbl_setnegativezerop1(resultp1); + + /* + * Generate multiply exponent + */ + mpy_exponent = Dbl_exponent(opnd1p1) + Dbl_exponent(opnd2p1) - DBL_BIAS; + + /* + * check first operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd1p1)) { + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + if (Dbl_isnotnan(opnd2p1,opnd2p2) && + Dbl_isnotnan(opnd3p1,opnd3p2)) { + if (Dbl_iszero_exponentmantissa(opnd2p1,opnd2p2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Dbl_isinfinity(opnd3p1,opnd3p2) && + (Dbl_sign(resultp1) ^ Dbl_sign(opnd3p1))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd1p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd1p1); + } + /* + * is second operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + /* + * is third operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd1p1,opnd1p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check second operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd2p1)) { + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + if (Dbl_isnotnan(opnd3p1,opnd3p2)) { + if (Dbl_iszero_exponentmantissa(opnd1p1,opnd1p2)) { + /* + * invalid since multiply operands are + * zero & infinity + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(opnd2p1,opnd2p2); + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Dbl_isinfinity(opnd3p1,opnd3p2) && + (Dbl_sign(resultp1) ^ Dbl_sign(opnd3p1))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Dbl_makequietnan(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Dbl_setinfinity_exponentmantissa(resultp1,resultp2); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd2p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd2p1); + } + /* + * is third operand a signaling NaN? + */ + else if (Dbl_is_signalingnan(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd2p1,opnd2p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check third operand for NaN's or infinity + */ + if (Dbl_isinfinity_exponent(opnd3p1)) { + if (Dbl_iszero_mantissa(opnd3p1,opnd3p2)) { + /* return infinity */ + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } else { + /* + * is NaN; signaling or quiet? + */ + if (Dbl_isone_signaling(opnd3p1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(opnd3p1); + } + /* + * return quiet NaN + */ + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * Generate multiply mantissa + */ + if (Dbl_isnotzero_exponent(opnd1p1)) { + /* set hidden bit */ + Dbl_clear_signexponent_set_hidden(opnd1p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd1p1,opnd1p2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Dbl_iszero_exponentmantissa(opnd3p1,opnd3p2)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Dbl_or_signs(opnd3p1,resultp1); + } else { + Dbl_and_signs(opnd3p1,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Dbl_iszero_exponent(opnd3p1) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(opnd3p1); + result_exponent = 0; + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,result_exponent); + Dbl_set_sign(opnd3p1,/*using*/sign_save); + Dbl_setwrapped_exponent(opnd3p1,result_exponent, + unfl); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Dbl_clear_signexponent(opnd1p1); + Dbl_leftshiftby1(opnd1p1,opnd1p2); + Dbl_normalize(opnd1p1,opnd1p2,mpy_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Dbl_isnotzero_exponent(opnd2p1)) { + Dbl_clear_signexponent_set_hidden(opnd2p1); + } + else { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd2p1,opnd2p2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Dbl_iszero_exponentmantissa(opnd3p1,opnd3p2)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Dbl_or_signs(opnd3p1,resultp1); + } else { + Dbl_and_signs(opnd3p1,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Dbl_iszero_exponent(opnd3p1) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Dbl_signextendedsign(opnd3p1); + result_exponent = 0; + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,result_exponent); + Dbl_set_sign(opnd3p1,/*using*/sign_save); + Dbl_setwrapped_exponent(opnd3p1,result_exponent, + unfl); + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Dbl_copytoptr(opnd3p1,opnd3p2,dstptr); + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Dbl_clear_signexponent(opnd2p1); + Dbl_leftshiftby1(opnd2p1,opnd2p2); + Dbl_normalize(opnd2p1,opnd2p2,mpy_exponent); + } + + /* Multiply the first two source mantissas together */ + + /* + * The intermediate result will be kept in tmpres, + * which needs enough room for 106 bits of mantissa, + * so lets call it a Double extended. + */ + Dblext_setzero(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count = DBL_P-1; count >= 0; count -= 4) { + Dblext_rightshiftby4(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + if (Dbit28p2(opnd1p2)) { + /* Fourword_add should be an ADD followed by 3 ADDC's */ + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<3 | opnd2p2>>29, opnd2p2<<3, 0, 0); + } + if (Dbit29p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<2 | opnd2p2>>30, opnd2p2<<2, 0, 0); + } + if (Dbit30p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1<<1 | opnd2p2>>31, opnd2p2<<1, 0, 0); + } + if (Dbit31p2(opnd1p2)) { + Fourword_add(tmpresp1, tmpresp2, tmpresp3, tmpresp4, + opnd2p1, opnd2p2, 0, 0); + } + Dbl_rightshiftby4(opnd1p1,opnd1p2); + } + if (Is_dexthiddenoverflow(tmpresp1)) { + /* result mantissa >= 2 (mantissa overflow) */ + mpy_exponent++; + Dblext_rightshiftby1(tmpresp1,tmpresp2,tmpresp3,tmpresp4); + } + + /* + * Restore the sign of the mpy result which was saved in resultp1. + * The exponent will continue to be kept in mpy_exponent. + */ + Dblext_set_sign(tmpresp1,Dbl_sign(resultp1)); + + /* + * No rounding is required, since the result of the multiply + * is exact in the extended format. + */ + + /* + * Now we are ready to perform the add portion of the operation. + * + * The exponents need to be kept as integers for now, since the + * multiply result might not fit into the exponent field. We + * can't overflow or underflow because of this yet, since the + * add could bring the final result back into range. + */ + add_exponent = Dbl_exponent(opnd3p1); + + /* + * Check for denormalized or zero add operand. + */ + if (add_exponent == 0) { + /* check for zero */ + if (Dbl_iszero_mantissa(opnd3p1,opnd3p2)) { + /* right is zero */ + /* Left can't be zero and must be result. + * + * The final result is now in tmpres and mpy_exponent, + * and needs to be rounded and squeezed back into + * double precision format from double extended. + */ + result_exponent = mpy_exponent; + Dblext_copy(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1);/*save sign*/ + goto round; + } + + /* + * Neither are zeroes. + * Adjust exponent and normalize add operand. + */ + sign_save = Dbl_signextendedsign(opnd3p1); /* save sign */ + Dbl_clear_signexponent(opnd3p1); + Dbl_leftshiftby1(opnd3p1,opnd3p2); + Dbl_normalize(opnd3p1,opnd3p2,add_exponent); + Dbl_set_sign(opnd3p1,sign_save); /* restore sign */ + } else { + Dbl_clear_exponent_set_hidden(opnd3p1); + } + /* + * Copy opnd3 to the double extended variable called right. + */ + Dbl_copyto_dblext(opnd3p1,opnd3p2,rightp1,rightp2,rightp3,rightp4); + + /* + * A zero "save" helps discover equal operands (for later), + * and is used in swapping operands (if needed). + */ + Dblext_xortointp1(tmpresp1,rightp1,/*to*/save); + + /* + * Compare magnitude of operands. + */ + Dblext_copytoint_exponentmantissap1(tmpresp1,signlessleft1); + Dblext_copytoint_exponentmantissap1(rightp1,signlessright1); + if (mpy_exponent < add_exponent || mpy_exponent == add_exponent && + Dblext_ismagnitudeless(tmpresp2,rightp2,signlessleft1,signlessright1)){ + /* + * Set the left operand to the larger one by XOR swap. + * First finish the first word "save". + */ + Dblext_xorfromintp1(save,rightp1,/*to*/rightp1); + Dblext_xorfromintp1(save,tmpresp1,/*to*/tmpresp1); + Dblext_swap_lower(tmpresp2,tmpresp3,tmpresp4, + rightp2,rightp3,rightp4); + /* also setup exponents used in rest of routine */ + diff_exponent = add_exponent - mpy_exponent; + result_exponent = add_exponent; + } else { + /* also setup exponents used in rest of routine */ + diff_exponent = mpy_exponent - add_exponent; + result_exponent = mpy_exponent; + } + /* Invariant: left is not smaller than right. */ + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for + * this infrequent case. + */ + if (diff_exponent > DBLEXT_THRESHOLD) { + diff_exponent = DBLEXT_THRESHOLD; + } + + /* Align right operand by shifting it to the right */ + Dblext_clear_sign(rightp1); + Dblext_right_align(rightp1,rightp2,rightp3,rightp4, + /*shifted by*/diff_exponent); + + /* Treat sum and difference of the operands separately. */ + if ((int)save < 0) { + /* + * Difference of the two operands. Overflow can occur if the + * multiply overflowed. A borrow can occur out of the hidden + * bit and force a post normalization phase. + */ + Dblext_subtract(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + rightp1,rightp2,rightp3,rightp4, + resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1); + if (Dbl_iszero_hidden(resultp1)) { + /* Handle normalization */ + /* A straight foward algorithm would now shift the + * result and extension left until the hidden bit + * becomes one. Not all of the extension bits need + * participate in the shift. Only the two most + * significant bits (round and guard) are needed. + * If only a single shift is needed then the guard + * bit becomes a significant low order bit and the + * extension must participate in the rounding. + * If more than a single shift is needed, then all + * bits to the right of the guard bit are zeros, + * and the guard bit may or may not be zero. */ + Dblext_leftshiftby1(resultp1,resultp2,resultp3, + resultp4); + + /* Need to check for a zero result. The sign and + * exponent fields have already been zeroed. The more + * efficient test of the full object can be used. + */ + if (Dblext_iszero(resultp1,resultp2,resultp3,resultp4)) { + /* Must have been "x-x" or "x+(-x)". */ + if (Is_rounding_mode(ROUNDMINUS)) + Dbl_setone_sign(resultp1); + Dbl_copytoptr(resultp1,resultp2,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + + /* Look to see if normalization is finished. */ + if (Dbl_isone_hidden(resultp1)) { + /* No further normalization is needed */ + goto round; + } + + /* Discover first one bit to determine shift amount. + * Use a modified binary search. We have already + * shifted the result one position right and still + * not found a one so the remainder of the extension + * must be zero and simplifies rounding. */ + /* Scan bytes */ + while (Dbl_iszero_hiddenhigh7mantissa(resultp1)) { + Dblext_leftshiftby8(resultp1,resultp2,resultp3,resultp4); + result_exponent -= 8; + } + /* Now narrow it down to the nibble */ + if (Dbl_iszero_hiddenhigh3mantissa(resultp1)) { + /* The lower nibble contains the + * normalizing one */ + Dblext_leftshiftby4(resultp1,resultp2,resultp3,resultp4); + result_exponent -= 4; + } + /* Select case where first bit is set (already + * normalized) otherwise select the proper shift. */ + jumpsize = Dbl_hiddenhigh3mantissa(resultp1); + if (jumpsize <= 7) switch(jumpsize) { + case 1: + Dblext_leftshiftby3(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 3; + break; + case 2: + case 3: + Dblext_leftshiftby2(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 2; + break; + case 4: + case 5: + case 6: + case 7: + Dblext_leftshiftby1(resultp1,resultp2,resultp3, + resultp4); + result_exponent -= 1; + break; + } + } /* end if (hidden...)... */ + /* Fall through and round */ + } /* end if (save < 0)... */ + else { + /* Add magnitudes */ + Dblext_addition(tmpresp1,tmpresp2,tmpresp3,tmpresp4, + rightp1,rightp2,rightp3,rightp4, + /*to*/resultp1,resultp2,resultp3,resultp4); + sign_save = Dbl_signextendedsign(resultp1); + if (Dbl_isone_hiddenoverflow(resultp1)) { + /* Prenormalization required. */ + Dblext_arithrightshiftby1(resultp1,resultp2,resultp3, + resultp4); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension and lower two words are + * all zeros, then the result is exact. Otherwise round in the + * correct direction. Underflow is possible. If a postnormalization + * is necessary, then the mantissa is all zeros so no shift is needed. + */ + round: + if (result_exponent <= 0 && !Is_underflowtrap_enabled()) { + Dblext_denormalize(resultp1,resultp2,resultp3,resultp4, + result_exponent,is_tiny); + } + Dbl_set_sign(resultp1,/*using*/sign_save); + if (Dblext_isnotzero_mantissap3(resultp3) || + Dblext_isnotzero_mantissap4(resultp4)) { + inexact = TRUE; + switch(Rounding_mode()) { + case ROUNDNEAREST: /* The default. */ + if (Dblext_isone_highp3(resultp3)) { + /* at least 1/2 ulp */ + if (Dblext_isnotzero_low31p3(resultp3) || + Dblext_isnotzero_mantissap4(resultp4) || + Dblext_isone_lowp2(resultp2)) { + /* either exactly half way and odd or + * more than 1/2ulp */ + Dbl_increment(resultp1,resultp2); + } + } + break; + + case ROUNDPLUS: + if (Dbl_iszero_sign(resultp1)) { + /* Round up positive results */ + Dbl_increment(resultp1,resultp2); + } + break; + + case ROUNDMINUS: + if (Dbl_isone_sign(resultp1)) { + /* Round down negative results */ + Dbl_increment(resultp1,resultp2); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if (Dbl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if (result_exponent >= DBL_INFINITY_EXPONENT) { + /* Overflow */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_OVERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return (OPC_2E_OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + Dbl_setoverflow(resultp1,resultp2); + } else if (result_exponent <= 0) { /* underflow case */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Dbl_setwrapped_exponent(resultp1,result_exponent,unfl); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_UNDERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(OPC_2E_UNDERFLOWEXCEPTION); + } + else if (inexact && is_tiny) Set_underflowflag(); + } + else Dbl_set_exponent(resultp1,result_exponent); + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) return(OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} + +/* + * Single Floating-point Multiply Fused Add + */ + +sgl_fmpyfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + +sgl_floating_point *src1ptr, *src2ptr, *src3ptr, *dstptr; +unsigned int *status; +{ + unsigned int opnd1, opnd2, opnd3; + register unsigned int tmpresp1, tmpresp2; + unsigned int rightp1, rightp2; + unsigned int resultp1, resultp2 = 0; + register int mpy_exponent, add_exponent, count; + boolean inexact = FALSE, is_tiny = FALSE; + + unsigned int signlessleft1, signlessright1, save; + register int result_exponent, diff_exponent; + int sign_save, jumpsize; + + Sgl_copyfromptr(src1ptr,opnd1); + Sgl_copyfromptr(src2ptr,opnd2); + Sgl_copyfromptr(src3ptr,opnd3); + + /* + * set sign bit of result of multiply + */ + if (Sgl_sign(opnd1) ^ Sgl_sign(opnd2)) + Sgl_setnegativezero(resultp1); + else Sgl_setzero(resultp1); + + /* + * Generate multiply exponent + */ + mpy_exponent = Sgl_exponent(opnd1) + Sgl_exponent(opnd2) - SGL_BIAS; + + /* + * check first operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd1)) { + if (Sgl_iszero_mantissa(opnd1)) { + if (Sgl_isnotnan(opnd2) && Sgl_isnotnan(opnd3)) { + if (Sgl_iszero_exponentmantissa(opnd2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Sgl_isinfinity(opnd3) && + (Sgl_sign(resultp1) ^ Sgl_sign(opnd3))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd1); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + /* + * is third operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd1,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd2)) { + if (Sgl_iszero_mantissa(opnd2)) { + if (Sgl_isnotnan(opnd3)) { + if (Sgl_iszero_exponentmantissa(opnd1)) { + /* + * invalid since multiply operands are + * zero & infinity + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(opnd2); + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Sgl_isinfinity(opnd3) && + (Sgl_sign(resultp1) ^ Sgl_sign(opnd3))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + } + /* + * is third operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check third operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd3)) { + if (Sgl_iszero_mantissa(opnd3)) { + /* return infinity */ + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + } + + /* + * Generate multiply mantissa + */ + if (Sgl_isnotzero_exponent(opnd1)) { + /* set hidden bit */ + Sgl_clear_signexponent_set_hidden(opnd1); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd1)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Sgl_iszero_exponentmantissa(opnd3)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Sgl_or_signs(opnd3,resultp1); + } else { + Sgl_and_signs(opnd3,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Sgl_iszero_exponent(opnd3) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(opnd3); + result_exponent = 0; + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,result_exponent); + Sgl_set_sign(opnd3,/*using*/sign_save); + Sgl_setwrapped_exponent(opnd3,result_exponent, + unfl); + Sgl_copytoptr(opnd3,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Sgl_clear_signexponent(opnd1); + Sgl_leftshiftby1(opnd1); + Sgl_normalize(opnd1,mpy_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Sgl_isnotzero_exponent(opnd2)) { + Sgl_clear_signexponent_set_hidden(opnd2); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Sgl_iszero_exponentmantissa(opnd3)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Sgl_or_signs(opnd3,resultp1); + } else { + Sgl_and_signs(opnd3,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Sgl_iszero_exponent(opnd3) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(opnd3); + result_exponent = 0; + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,result_exponent); + Sgl_set_sign(opnd3,/*using*/sign_save); + Sgl_setwrapped_exponent(opnd3,result_exponent, + unfl); + Sgl_copytoptr(opnd3,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Sgl_clear_signexponent(opnd2); + Sgl_leftshiftby1(opnd2); + Sgl_normalize(opnd2,mpy_exponent); + } + + /* Multiply the first two source mantissas together */ + + /* + * The intermediate result will be kept in tmpres, + * which needs enough room for 106 bits of mantissa, + * so lets call it a Double extended. + */ + Sglext_setzero(tmpresp1,tmpresp2); + + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count = SGL_P-1; count >= 0; count -= 4) { + Sglext_rightshiftby4(tmpresp1,tmpresp2); + if (Sbit28(opnd1)) { + /* Twoword_add should be an ADD followed by 2 ADDC's */ + Twoword_add(tmpresp1, tmpresp2, opnd2<<3, 0); + } + if (Sbit29(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2<<2, 0); + } + if (Sbit30(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2<<1, 0); + } + if (Sbit31(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2, 0); + } + Sgl_rightshiftby4(opnd1); + } + if (Is_sexthiddenoverflow(tmpresp1)) { + /* result mantissa >= 2 (mantissa overflow) */ + mpy_exponent++; + Sglext_rightshiftby4(tmpresp1,tmpresp2); + } else { + Sglext_rightshiftby3(tmpresp1,tmpresp2); + } + + /* + * Restore the sign of the mpy result which was saved in resultp1. + * The exponent will continue to be kept in mpy_exponent. + */ + Sglext_set_sign(tmpresp1,Sgl_sign(resultp1)); + + /* + * No rounding is required, since the result of the multiply + * is exact in the extended format. + */ + + /* + * Now we are ready to perform the add portion of the operation. + * + * The exponents need to be kept as integers for now, since the + * multiply result might not fit into the exponent field. We + * can't overflow or underflow because of this yet, since the + * add could bring the final result back into range. + */ + add_exponent = Sgl_exponent(opnd3); + + /* + * Check for denormalized or zero add operand. + */ + if (add_exponent == 0) { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd3)) { + /* right is zero */ + /* Left can't be zero and must be result. + * + * The final result is now in tmpres and mpy_exponent, + * and needs to be rounded and squeezed back into + * double precision format from double extended. + */ + result_exponent = mpy_exponent; + Sglext_copy(tmpresp1,tmpresp2,resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1);/*save sign*/ + goto round; + } + + /* + * Neither are zeroes. + * Adjust exponent and normalize add operand. + */ + sign_save = Sgl_signextendedsign(opnd3); /* save sign */ + Sgl_clear_signexponent(opnd3); + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,add_exponent); + Sgl_set_sign(opnd3,sign_save); /* restore sign */ + } else { + Sgl_clear_exponent_set_hidden(opnd3); + } + /* + * Copy opnd3 to the double extended variable called right. + */ + Sgl_copyto_sglext(opnd3,rightp1,rightp2); + + /* + * A zero "save" helps discover equal operands (for later), + * and is used in swapping operands (if needed). + */ + Sglext_xortointp1(tmpresp1,rightp1,/*to*/save); + + /* + * Compare magnitude of operands. + */ + Sglext_copytoint_exponentmantissa(tmpresp1,signlessleft1); + Sglext_copytoint_exponentmantissa(rightp1,signlessright1); + if (mpy_exponent < add_exponent || mpy_exponent == add_exponent && + Sglext_ismagnitudeless(signlessleft1,signlessright1)) { + /* + * Set the left operand to the larger one by XOR swap. + * First finish the first word "save". + */ + Sglext_xorfromintp1(save,rightp1,/*to*/rightp1); + Sglext_xorfromintp1(save,tmpresp1,/*to*/tmpresp1); + Sglext_swap_lower(tmpresp2,rightp2); + /* also setup exponents used in rest of routine */ + diff_exponent = add_exponent - mpy_exponent; + result_exponent = add_exponent; + } else { + /* also setup exponents used in rest of routine */ + diff_exponent = mpy_exponent - add_exponent; + result_exponent = mpy_exponent; + } + /* Invariant: left is not smaller than right. */ + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for + * this infrequent case. + */ + if (diff_exponent > SGLEXT_THRESHOLD) { + diff_exponent = SGLEXT_THRESHOLD; + } + + /* Align right operand by shifting it to the right */ + Sglext_clear_sign(rightp1); + Sglext_right_align(rightp1,rightp2,/*shifted by*/diff_exponent); + + /* Treat sum and difference of the operands separately. */ + if ((int)save < 0) { + /* + * Difference of the two operands. Overflow can occur if the + * multiply overflowed. A borrow can occur out of the hidden + * bit and force a post normalization phase. + */ + Sglext_subtract(tmpresp1,tmpresp2, rightp1,rightp2, + resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1); + if (Sgl_iszero_hidden(resultp1)) { + /* Handle normalization */ + /* A straight foward algorithm would now shift the + * result and extension left until the hidden bit + * becomes one. Not all of the extension bits need + * participate in the shift. Only the two most + * significant bits (round and guard) are needed. + * If only a single shift is needed then the guard + * bit becomes a significant low order bit and the + * extension must participate in the rounding. + * If more than a single shift is needed, then all + * bits to the right of the guard bit are zeros, + * and the guard bit may or may not be zero. */ + Sglext_leftshiftby1(resultp1,resultp2); + + /* Need to check for a zero result. The sign and + * exponent fields have already been zeroed. The more + * efficient test of the full object can be used. + */ + if (Sglext_iszero(resultp1,resultp2)) { + /* Must have been "x-x" or "x+(-x)". */ + if (Is_rounding_mode(ROUNDMINUS)) + Sgl_setone_sign(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + + /* Look to see if normalization is finished. */ + if (Sgl_isone_hidden(resultp1)) { + /* No further normalization is needed */ + goto round; + } + + /* Discover first one bit to determine shift amount. + * Use a modified binary search. We have already + * shifted the result one position right and still + * not found a one so the remainder of the extension + * must be zero and simplifies rounding. */ + /* Scan bytes */ + while (Sgl_iszero_hiddenhigh7mantissa(resultp1)) { + Sglext_leftshiftby8(resultp1,resultp2); + result_exponent -= 8; + } + /* Now narrow it down to the nibble */ + if (Sgl_iszero_hiddenhigh3mantissa(resultp1)) { + /* The lower nibble contains the + * normalizing one */ + Sglext_leftshiftby4(resultp1,resultp2); + result_exponent -= 4; + } + /* Select case where first bit is set (already + * normalized) otherwise select the proper shift. */ + jumpsize = Sgl_hiddenhigh3mantissa(resultp1); + if (jumpsize <= 7) switch(jumpsize) { + case 1: + Sglext_leftshiftby3(resultp1,resultp2); + result_exponent -= 3; + break; + case 2: + case 3: + Sglext_leftshiftby2(resultp1,resultp2); + result_exponent -= 2; + break; + case 4: + case 5: + case 6: + case 7: + Sglext_leftshiftby1(resultp1,resultp2); + result_exponent -= 1; + break; + } + } /* end if (hidden...)... */ + /* Fall through and round */ + } /* end if (save < 0)... */ + else { + /* Add magnitudes */ + Sglext_addition(tmpresp1,tmpresp2, + rightp1,rightp2, /*to*/resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1); + if (Sgl_isone_hiddenoverflow(resultp1)) { + /* Prenormalization required. */ + Sglext_arithrightshiftby1(resultp1,resultp2); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension and lower two words are + * all zeros, then the result is exact. Otherwise round in the + * correct direction. Underflow is possible. If a postnormalization + * is necessary, then the mantissa is all zeros so no shift is needed. + */ + round: + if (result_exponent <= 0 && !Is_underflowtrap_enabled()) { + Sglext_denormalize(resultp1,resultp2,result_exponent,is_tiny); + } + Sgl_set_sign(resultp1,/*using*/sign_save); + if (Sglext_isnotzero_mantissap2(resultp2)) { + inexact = TRUE; + switch(Rounding_mode()) { + case ROUNDNEAREST: /* The default. */ + if (Sglext_isone_highp2(resultp2)) { + /* at least 1/2 ulp */ + if (Sglext_isnotzero_low31p2(resultp2) || + Sglext_isone_lowp1(resultp1)) { + /* either exactly half way and odd or + * more than 1/2ulp */ + Sgl_increment(resultp1); + } + } + break; + + case ROUNDPLUS: + if (Sgl_iszero_sign(resultp1)) { + /* Round up positive results */ + Sgl_increment(resultp1); + } + break; + + case ROUNDMINUS: + if (Sgl_isone_sign(resultp1)) { + /* Round down negative results */ + Sgl_increment(resultp1); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if (Sgl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if (result_exponent >= SGL_INFINITY_EXPONENT) { + /* Overflow */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_OVERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return (OPC_2E_OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + Sgl_setoverflow(resultp1); + } else if (result_exponent <= 0) { /* underflow case */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(resultp1,result_exponent,unfl); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_UNDERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(OPC_2E_UNDERFLOWEXCEPTION); + } + else if (inexact && is_tiny) Set_underflowflag(); + } + else Sgl_set_exponent(resultp1,result_exponent); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) return(OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} + +/* + * Single Floating-point Multiply Negate Fused Add + */ + +sgl_fmpynfadd(src1ptr,src2ptr,src3ptr,status,dstptr) + +sgl_floating_point *src1ptr, *src2ptr, *src3ptr, *dstptr; +unsigned int *status; +{ + unsigned int opnd1, opnd2, opnd3; + register unsigned int tmpresp1, tmpresp2; + unsigned int rightp1, rightp2; + unsigned int resultp1, resultp2 = 0; + register int mpy_exponent, add_exponent, count; + boolean inexact = FALSE, is_tiny = FALSE; + + unsigned int signlessleft1, signlessright1, save; + register int result_exponent, diff_exponent; + int sign_save, jumpsize; + + Sgl_copyfromptr(src1ptr,opnd1); + Sgl_copyfromptr(src2ptr,opnd2); + Sgl_copyfromptr(src3ptr,opnd3); + + /* + * set sign bit of result of multiply + */ + if (Sgl_sign(opnd1) ^ Sgl_sign(opnd2)) + Sgl_setzero(resultp1); + else + Sgl_setnegativezero(resultp1); + + /* + * Generate multiply exponent + */ + mpy_exponent = Sgl_exponent(opnd1) + Sgl_exponent(opnd2) - SGL_BIAS; + + /* + * check first operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd1)) { + if (Sgl_iszero_mantissa(opnd1)) { + if (Sgl_isnotnan(opnd2) && Sgl_isnotnan(opnd3)) { + if (Sgl_iszero_exponentmantissa(opnd2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Sgl_isinfinity(opnd3) && + (Sgl_sign(resultp1) ^ Sgl_sign(opnd3))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd1); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + /* + * is third operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd1,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd2)) { + if (Sgl_iszero_mantissa(opnd2)) { + if (Sgl_isnotnan(opnd3)) { + if (Sgl_iszero_exponentmantissa(opnd1)) { + /* + * invalid since multiply operands are + * zero & infinity + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(opnd2); + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + + /* + * Check third operand for infinity with a + * sign opposite of the multiply result + */ + if (Sgl_isinfinity(opnd3) && + (Sgl_sign(resultp1) ^ Sgl_sign(opnd3))) { + /* + * invalid since attempting a magnitude + * subtraction of infinities + */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + } + /* + * is third operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd2,dstptr); + return(NOEXCEPTION); + } + } + + /* + * check third operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd3)) { + if (Sgl_iszero_mantissa(opnd3)) { + /* return infinity */ + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd3)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(OPC_2E_INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd3); + } + /* + * return quiet NaN + */ + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + } + + /* + * Generate multiply mantissa + */ + if (Sgl_isnotzero_exponent(opnd1)) { + /* set hidden bit */ + Sgl_clear_signexponent_set_hidden(opnd1); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd1)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Sgl_iszero_exponentmantissa(opnd3)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Sgl_or_signs(opnd3,resultp1); + } else { + Sgl_and_signs(opnd3,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Sgl_iszero_exponent(opnd3) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(opnd3); + result_exponent = 0; + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,result_exponent); + Sgl_set_sign(opnd3,/*using*/sign_save); + Sgl_setwrapped_exponent(opnd3,result_exponent, + unfl); + Sgl_copytoptr(opnd3,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Sgl_clear_signexponent(opnd1); + Sgl_leftshiftby1(opnd1); + Sgl_normalize(opnd1,mpy_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Sgl_isnotzero_exponent(opnd2)) { + Sgl_clear_signexponent_set_hidden(opnd2); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd2)) { + /* + * Perform the add opnd3 with zero here. + */ + if (Sgl_iszero_exponentmantissa(opnd3)) { + if (Is_rounding_mode(ROUNDMINUS)) { + Sgl_or_signs(opnd3,resultp1); + } else { + Sgl_and_signs(opnd3,resultp1); + } + } + /* + * Now let's check for trapped underflow case. + */ + else if (Sgl_iszero_exponent(opnd3) && + Is_underflowtrap_enabled()) { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(opnd3); + result_exponent = 0; + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,result_exponent); + Sgl_set_sign(opnd3,/*using*/sign_save); + Sgl_setwrapped_exponent(opnd3,result_exponent, + unfl); + Sgl_copytoptr(opnd3,dstptr); + /* inexact = FALSE */ + return(OPC_2E_UNDERFLOWEXCEPTION); + } + Sgl_copytoptr(opnd3,dstptr); + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Sgl_clear_signexponent(opnd2); + Sgl_leftshiftby1(opnd2); + Sgl_normalize(opnd2,mpy_exponent); + } + + /* Multiply the first two source mantissas together */ + + /* + * The intermediate result will be kept in tmpres, + * which needs enough room for 106 bits of mantissa, + * so lets call it a Double extended. + */ + Sglext_setzero(tmpresp1,tmpresp2); + + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count = SGL_P-1; count >= 0; count -= 4) { + Sglext_rightshiftby4(tmpresp1,tmpresp2); + if (Sbit28(opnd1)) { + /* Twoword_add should be an ADD followed by 2 ADDC's */ + Twoword_add(tmpresp1, tmpresp2, opnd2<<3, 0); + } + if (Sbit29(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2<<2, 0); + } + if (Sbit30(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2<<1, 0); + } + if (Sbit31(opnd1)) { + Twoword_add(tmpresp1, tmpresp2, opnd2, 0); + } + Sgl_rightshiftby4(opnd1); + } + if (Is_sexthiddenoverflow(tmpresp1)) { + /* result mantissa >= 2 (mantissa overflow) */ + mpy_exponent++; + Sglext_rightshiftby4(tmpresp1,tmpresp2); + } else { + Sglext_rightshiftby3(tmpresp1,tmpresp2); + } + + /* + * Restore the sign of the mpy result which was saved in resultp1. + * The exponent will continue to be kept in mpy_exponent. + */ + Sglext_set_sign(tmpresp1,Sgl_sign(resultp1)); + + /* + * No rounding is required, since the result of the multiply + * is exact in the extended format. + */ + + /* + * Now we are ready to perform the add portion of the operation. + * + * The exponents need to be kept as integers for now, since the + * multiply result might not fit into the exponent field. We + * can't overflow or underflow because of this yet, since the + * add could bring the final result back into range. + */ + add_exponent = Sgl_exponent(opnd3); + + /* + * Check for denormalized or zero add operand. + */ + if (add_exponent == 0) { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd3)) { + /* right is zero */ + /* Left can't be zero and must be result. + * + * The final result is now in tmpres and mpy_exponent, + * and needs to be rounded and squeezed back into + * double precision format from double extended. + */ + result_exponent = mpy_exponent; + Sglext_copy(tmpresp1,tmpresp2,resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1);/*save sign*/ + goto round; + } + + /* + * Neither are zeroes. + * Adjust exponent and normalize add operand. + */ + sign_save = Sgl_signextendedsign(opnd3); /* save sign */ + Sgl_clear_signexponent(opnd3); + Sgl_leftshiftby1(opnd3); + Sgl_normalize(opnd3,add_exponent); + Sgl_set_sign(opnd3,sign_save); /* restore sign */ + } else { + Sgl_clear_exponent_set_hidden(opnd3); + } + /* + * Copy opnd3 to the double extended variable called right. + */ + Sgl_copyto_sglext(opnd3,rightp1,rightp2); + + /* + * A zero "save" helps discover equal operands (for later), + * and is used in swapping operands (if needed). + */ + Sglext_xortointp1(tmpresp1,rightp1,/*to*/save); + + /* + * Compare magnitude of operands. + */ + Sglext_copytoint_exponentmantissa(tmpresp1,signlessleft1); + Sglext_copytoint_exponentmantissa(rightp1,signlessright1); + if (mpy_exponent < add_exponent || mpy_exponent == add_exponent && + Sglext_ismagnitudeless(signlessleft1,signlessright1)) { + /* + * Set the left operand to the larger one by XOR swap. + * First finish the first word "save". + */ + Sglext_xorfromintp1(save,rightp1,/*to*/rightp1); + Sglext_xorfromintp1(save,tmpresp1,/*to*/tmpresp1); + Sglext_swap_lower(tmpresp2,rightp2); + /* also setup exponents used in rest of routine */ + diff_exponent = add_exponent - mpy_exponent; + result_exponent = add_exponent; + } else { + /* also setup exponents used in rest of routine */ + diff_exponent = mpy_exponent - add_exponent; + result_exponent = mpy_exponent; + } + /* Invariant: left is not smaller than right. */ + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for + * this infrequent case. + */ + if (diff_exponent > SGLEXT_THRESHOLD) { + diff_exponent = SGLEXT_THRESHOLD; + } + + /* Align right operand by shifting it to the right */ + Sglext_clear_sign(rightp1); + Sglext_right_align(rightp1,rightp2,/*shifted by*/diff_exponent); + + /* Treat sum and difference of the operands separately. */ + if ((int)save < 0) { + /* + * Difference of the two operands. Overflow can occur if the + * multiply overflowed. A borrow can occur out of the hidden + * bit and force a post normalization phase. + */ + Sglext_subtract(tmpresp1,tmpresp2, rightp1,rightp2, + resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1); + if (Sgl_iszero_hidden(resultp1)) { + /* Handle normalization */ + /* A straight foward algorithm would now shift the + * result and extension left until the hidden bit + * becomes one. Not all of the extension bits need + * participate in the shift. Only the two most + * significant bits (round and guard) are needed. + * If only a single shift is needed then the guard + * bit becomes a significant low order bit and the + * extension must participate in the rounding. + * If more than a single shift is needed, then all + * bits to the right of the guard bit are zeros, + * and the guard bit may or may not be zero. */ + Sglext_leftshiftby1(resultp1,resultp2); + + /* Need to check for a zero result. The sign and + * exponent fields have already been zeroed. The more + * efficient test of the full object can be used. + */ + if (Sglext_iszero(resultp1,resultp2)) { + /* Must have been "x-x" or "x+(-x)". */ + if (Is_rounding_mode(ROUNDMINUS)) + Sgl_setone_sign(resultp1); + Sgl_copytoptr(resultp1,dstptr); + return(NOEXCEPTION); + } + result_exponent--; + + /* Look to see if normalization is finished. */ + if (Sgl_isone_hidden(resultp1)) { + /* No further normalization is needed */ + goto round; + } + + /* Discover first one bit to determine shift amount. + * Use a modified binary search. We have already + * shifted the result one position right and still + * not found a one so the remainder of the extension + * must be zero and simplifies rounding. */ + /* Scan bytes */ + while (Sgl_iszero_hiddenhigh7mantissa(resultp1)) { + Sglext_leftshiftby8(resultp1,resultp2); + result_exponent -= 8; + } + /* Now narrow it down to the nibble */ + if (Sgl_iszero_hiddenhigh3mantissa(resultp1)) { + /* The lower nibble contains the + * normalizing one */ + Sglext_leftshiftby4(resultp1,resultp2); + result_exponent -= 4; + } + /* Select case where first bit is set (already + * normalized) otherwise select the proper shift. */ + jumpsize = Sgl_hiddenhigh3mantissa(resultp1); + if (jumpsize <= 7) switch(jumpsize) { + case 1: + Sglext_leftshiftby3(resultp1,resultp2); + result_exponent -= 3; + break; + case 2: + case 3: + Sglext_leftshiftby2(resultp1,resultp2); + result_exponent -= 2; + break; + case 4: + case 5: + case 6: + case 7: + Sglext_leftshiftby1(resultp1,resultp2); + result_exponent -= 1; + break; + } + } /* end if (hidden...)... */ + /* Fall through and round */ + } /* end if (save < 0)... */ + else { + /* Add magnitudes */ + Sglext_addition(tmpresp1,tmpresp2, + rightp1,rightp2, /*to*/resultp1,resultp2); + sign_save = Sgl_signextendedsign(resultp1); + if (Sgl_isone_hiddenoverflow(resultp1)) { + /* Prenormalization required. */ + Sglext_arithrightshiftby1(resultp1,resultp2); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension and lower two words are + * all zeros, then the result is exact. Otherwise round in the + * correct direction. Underflow is possible. If a postnormalization + * is necessary, then the mantissa is all zeros so no shift is needed. + */ + round: + if (result_exponent <= 0 && !Is_underflowtrap_enabled()) { + Sglext_denormalize(resultp1,resultp2,result_exponent,is_tiny); + } + Sgl_set_sign(resultp1,/*using*/sign_save); + if (Sglext_isnotzero_mantissap2(resultp2)) { + inexact = TRUE; + switch(Rounding_mode()) { + case ROUNDNEAREST: /* The default. */ + if (Sglext_isone_highp2(resultp2)) { + /* at least 1/2 ulp */ + if (Sglext_isnotzero_low31p2(resultp2) || + Sglext_isone_lowp1(resultp1)) { + /* either exactly half way and odd or + * more than 1/2ulp */ + Sgl_increment(resultp1); + } + } + break; + + case ROUNDPLUS: + if (Sgl_iszero_sign(resultp1)) { + /* Round up positive results */ + Sgl_increment(resultp1); + } + break; + + case ROUNDMINUS: + if (Sgl_isone_sign(resultp1)) { + /* Round down negative results */ + Sgl_increment(resultp1); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if (Sgl_isone_hiddenoverflow(resultp1)) result_exponent++; + } + if (result_exponent >= SGL_INFINITY_EXPONENT) { + /* Overflow */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(resultp1,result_exponent,ovfl); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_OVERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return (OPC_2E_OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + Sgl_setoverflow(resultp1); + } else if (result_exponent <= 0) { /* underflow case */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(resultp1,result_exponent,unfl); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) + return (OPC_2E_UNDERFLOWEXCEPTION | + OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(OPC_2E_UNDERFLOWEXCEPTION); + } + else if (inexact && is_tiny) Set_underflowflag(); + } + else Sgl_set_exponent(resultp1,result_exponent); + Sgl_copytoptr(resultp1,dstptr); + if (inexact) + if (Is_inexacttrap_enabled()) return(OPC_2E_INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); +} + diff --git a/arch/parisc/math-emu/fpbits.h b/arch/parisc/math-emu/fpbits.h new file mode 100644 index 000000000000..cefad064d74a --- /dev/null +++ b/arch/parisc/math-emu/fpbits.h @@ -0,0 +1,65 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + + +/* + * These macros are designed to be portable to all machines that have + * a wordsize greater than or equal to 32 bits that support the portable + * C compiler and the standard C preprocessor. Wordsize (default 32) + * and bitfield assignment (default left-to-right, unlike VAX, PDP-11) + * should be predefined using the constants HOSTWDSZ and BITFRL and + * the C compiler "-D" flag (e.g., -DHOSTWDSZ=36 -DBITFLR for the DEC-20). + * Note that the macro arguments assume that the integer being referenced + * is a 32-bit integer (right-justified on the 20) and that bit 0 is the + * most significant bit. + */ + +#ifndef HOSTWDSZ +#define HOSTWDSZ 32 +#endif + + +/*########################### Macros ######################################*/ + +/*------------------------------------------------------------------------- + * NewDeclareBitField_Reference - Declare a structure similar to the simulator + * function "DeclBitfR" except its use is restricted to occur within a larger + * enclosing structure or union definition. This declaration is an unnamed + * structure with the argument, name, as the member name and the argument, + * uname, as the element name. + *----------------------------------------------------------------------- */ +#define Bitfield_extract(start, length, object) \ + ((object) >> (HOSTWDSZ - (start) - (length)) & \ + ((unsigned)-1 >> (HOSTWDSZ - (length)))) + +#define Bitfield_signed_extract(start, length, object) \ + ((int)((object) << start) >> (HOSTWDSZ - (length))) + +#define Bitfield_mask(start, len, object) \ + ((object) & (((unsigned)-1 >> (HOSTWDSZ-len)) << (HOSTWDSZ-start-len))) + +#define Bitfield_deposit(value,start,len,object) object = \ + ((object) & ~(((unsigned)-1 >> (HOSTWDSZ-len)) << (HOSTWDSZ-start-len))) | \ + (((value) & ((unsigned)-1 >> (HOSTWDSZ-len))) << (HOSTWDSZ-start-len)) diff --git a/arch/parisc/math-emu/fpu.h b/arch/parisc/math-emu/fpu.h new file mode 100644 index 000000000000..0af5c3c88949 --- /dev/null +++ b/arch/parisc/math-emu/fpu.h @@ -0,0 +1,76 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/fp/fpu.h $Revision: 1.1 $ + * + * Purpose: + * <> + * + * + * END_DESC +*/ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + + +#ifndef _MACHINE_FPU_INCLUDED /* allows multiple inclusion */ +#define _MACHINE_FPU_INCLUDED + +#if 0 +#ifndef _SYS_STDSYMS_INCLUDED +# include +#endif /* _SYS_STDSYMS_INCLUDED */ +#include +#endif + +#define PA83_FPU_FLAG 0x00000001 +#define PA89_FPU_FLAG 0x00000002 +#define PA2_0_FPU_FLAG 0x00000010 + +#define TIMEX_EXTEN_FLAG 0x00000004 + +#define ROLEX_EXTEN_FLAG 0x00000008 +#define COPR_FP 0x00000080 /* Floating point -- Coprocessor 0 */ +#define SFU_MPY_DIVIDE 0x00008000 /* Multiply/Divide __ SFU 0 */ + + +#define EM_FPU_TYPE_OFFSET 272 + +/* version of EMULATION software for COPR,0,0 instruction */ +#define EMULATION_VERSION 4 + +/* + * The only was to differeniate between TIMEX and ROLEX (or PCX-S and PCX-T) + * is thorough the potential type field from the PDC_MODEL call. The + * following flags are used at assist this differeniation. + */ + +#define ROLEX_POTENTIAL_KEY_FLAGS PDC_MODEL_CPU_KEY_WORD_TO_IO +#define TIMEX_POTENTIAL_KEY_FLAGS (PDC_MODEL_CPU_KEY_QUAD_STORE | \ + PDC_MODEL_CPU_KEY_RECIP_SQRT) + + +#endif /* ! _MACHINE_FPU_INCLUDED */ diff --git a/arch/parisc/math-emu/fpudispatch.c b/arch/parisc/math-emu/fpudispatch.c new file mode 100644 index 000000000000..6e28f9f4c620 --- /dev/null +++ b/arch/parisc/math-emu/fpudispatch.c @@ -0,0 +1,1442 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/fp/fpudispatch.c $Revision: 1.1 $ + * + * Purpose: + * <> + * + * External Interfaces: + * <> + * emfpudispatch(ir, dummy1, dummy2, fpregs) + * fpudispatch(ir, excp_code, holder, fpregs) + * + * Internal Interfaces: + * <> + * static u_int decode_06(u_int, u_int *) + * static u_int decode_0c(u_int, u_int, u_int, u_int *) + * static u_int decode_0e(u_int, u_int, u_int, u_int *) + * static u_int decode_26(u_int, u_int *) + * static u_int decode_2e(u_int, u_int *) + * static void update_status_cbit(u_int *, u_int, u_int, u_int) + * + * Theory: + * <> + * + * END_DESC +*/ + +#define FPUDEBUG 0 + +#include "float.h" +#include +#include +/* #include */ +/* #include */ + +#define COPR_INST 0x30000000 + +/* + * definition of extru macro. If pos and len are constants, the compiler + * will generate an extru instruction when optimized + */ +#define extru(r,pos,len) (((r) >> (31-(pos))) & (( 1 << (len)) - 1)) +/* definitions of bit field locations in the instruction */ +#define fpmajorpos 5 +#define fpr1pos 10 +#define fpr2pos 15 +#define fptpos 31 +#define fpsubpos 18 +#define fpclass1subpos 16 +#define fpclasspos 22 +#define fpfmtpos 20 +#define fpdfpos 18 +#define fpnulpos 26 +/* + * the following are the extra bits for the 0E major op + */ +#define fpxr1pos 24 +#define fpxr2pos 19 +#define fpxtpos 25 +#define fpxpos 23 +#define fp0efmtpos 20 +/* + * the following are for the multi-ops + */ +#define fprm1pos 10 +#define fprm2pos 15 +#define fptmpos 31 +#define fprapos 25 +#define fptapos 20 +#define fpmultifmt 26 +/* + * the following are for the fused FP instructions + */ + /* fprm1pos 10 */ + /* fprm2pos 15 */ +#define fpraupos 18 +#define fpxrm2pos 19 + /* fpfmtpos 20 */ +#define fpralpos 23 +#define fpxrm1pos 24 + /* fpxtpos 25 */ +#define fpfusedsubop 26 + /* fptpos 31 */ + +/* + * offset to constant zero in the FP emulation registers + */ +#define fpzeroreg (32*sizeof(double)/sizeof(u_int)) + +/* + * extract the major opcode from the instruction + */ +#define get_major(op) extru(op,fpmajorpos,6) +/* + * extract the two bit class field from the FP instruction. The class is at bit + * positions 21-22 + */ +#define get_class(op) extru(op,fpclasspos,2) +/* + * extract the 3 bit subop field. For all but class 1 instructions, it is + * located at bit positions 16-18 + */ +#define get_subop(op) extru(op,fpsubpos,3) +/* + * extract the 2 or 3 bit subop field from class 1 instructions. It is located + * at bit positions 15-16 (PA1.1) or 14-16 (PA2.0) + */ +#define get_subop1_PA1_1(op) extru(op,fpclass1subpos,2) /* PA89 (1.1) fmt */ +#define get_subop1_PA2_0(op) extru(op,fpclass1subpos,3) /* PA 2.0 fmt */ + +/* definitions of unimplemented exceptions */ +#define MAJOR_0C_EXCP 0x09 +#define MAJOR_0E_EXCP 0x0b +#define MAJOR_06_EXCP 0x03 +#define MAJOR_26_EXCP 0x23 +#define MAJOR_2E_EXCP 0x2b +#define PA83_UNIMP_EXCP 0x01 + +/* + * Special Defines for TIMEX specific code + */ + +#define FPU_TYPE_FLAG_POS (EM_FPU_TYPE_OFFSET>>2) +#define TIMEX_ROLEX_FPU_MASK (TIMEX_EXTEN_FLAG|ROLEX_EXTEN_FLAG) + +/* + * Static function definitions + */ +#define _PROTOTYPES +#if defined(_PROTOTYPES) || defined(_lint) +static u_int decode_0c(u_int, u_int, u_int, u_int *); +static u_int decode_0e(u_int, u_int, u_int, u_int *); +static u_int decode_06(u_int, u_int *); +static u_int decode_26(u_int, u_int *); +static u_int decode_2e(u_int, u_int *); +static void update_status_cbit(u_int *, u_int, u_int, u_int); +#else /* !_PROTOTYPES&&!_lint */ +static u_int decode_0c(); +static u_int decode_0e(); +static u_int decode_06(); +static u_int decode_26(); +static u_int decode_2e(); +static void update_status_cbit(); +#endif /* _PROTOTYPES&&!_lint */ + +#define VASSERT(x) + +static void parisc_linux_get_fpu_type(u_int fpregs[]) +{ + /* on pa-linux the fpu type is not filled in by the + * caller; it is constructed here + */ + if (boot_cpu_data.cpu_type == pcxs) + fpregs[FPU_TYPE_FLAG_POS] = TIMEX_EXTEN_FLAG; + else if (boot_cpu_data.cpu_type == pcxt || + boot_cpu_data.cpu_type == pcxt_) + fpregs[FPU_TYPE_FLAG_POS] = ROLEX_EXTEN_FLAG; + else if (boot_cpu_data.cpu_type >= pcxu) + fpregs[FPU_TYPE_FLAG_POS] = PA2_0_FPU_FLAG; +} + +/* + * this routine will decode the excepting floating point instruction and + * call the approiate emulation routine. + * It is called by decode_fpu with the following parameters: + * fpudispatch(current_ir, unimplemented_code, 0, &Fpu_register) + * where current_ir is the instruction to be emulated, + * unimplemented_code is the exception_code that the hardware generated + * and &Fpu_register is the address of emulated FP reg 0. + */ +u_int +fpudispatch(u_int ir, u_int excp_code, u_int holder, u_int fpregs[]) +{ + u_int class, subop; + u_int fpu_type_flags; + + /* All FP emulation code assumes that ints are 4-bytes in length */ + VASSERT(sizeof(int) == 4); + + parisc_linux_get_fpu_type(fpregs); + + fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS]; /* get fpu type flags */ + + class = get_class(ir); + if (class == 1) { + if (fpu_type_flags & PA2_0_FPU_FLAG) + subop = get_subop1_PA2_0(ir); + else + subop = get_subop1_PA1_1(ir); + } + else + subop = get_subop(ir); + + if (FPUDEBUG) printk("class %d subop %d\n", class, subop); + + switch (excp_code) { + case MAJOR_0C_EXCP: + case PA83_UNIMP_EXCP: + return(decode_0c(ir,class,subop,fpregs)); + case MAJOR_0E_EXCP: + return(decode_0e(ir,class,subop,fpregs)); + case MAJOR_06_EXCP: + return(decode_06(ir,fpregs)); + case MAJOR_26_EXCP: + return(decode_26(ir,fpregs)); + case MAJOR_2E_EXCP: + return(decode_2e(ir,fpregs)); + default: + /* "crashme Night Gallery painting nr 2. (asm_crash.s). + * This was fixed for multi-user kernels, but + * workstation kernels had a panic here. This allowed + * any arbitrary user to panic the kernel by executing + * setting the FP exception registers to strange values + * and generating an emulation trap. The emulation and + * exception code must never be able to panic the + * kernel. + */ + return(UNIMPLEMENTEDEXCEPTION); + } +} + +/* + * this routine is called by $emulation_trap to emulate a coprocessor + * instruction if one doesn't exist + */ +u_int +emfpudispatch(u_int ir, u_int dummy1, u_int dummy2, u_int fpregs[]) +{ + u_int class, subop, major; + u_int fpu_type_flags; + + /* All FP emulation code assumes that ints are 4-bytes in length */ + VASSERT(sizeof(int) == 4); + + fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS]; /* get fpu type flags */ + + major = get_major(ir); + class = get_class(ir); + if (class == 1) { + if (fpu_type_flags & PA2_0_FPU_FLAG) + subop = get_subop1_PA2_0(ir); + else + subop = get_subop1_PA1_1(ir); + } + else + subop = get_subop(ir); + switch (major) { + case 0x0C: + return(decode_0c(ir,class,subop,fpregs)); + case 0x0E: + return(decode_0e(ir,class,subop,fpregs)); + case 0x06: + return(decode_06(ir,fpregs)); + case 0x26: + return(decode_26(ir,fpregs)); + case 0x2E: + return(decode_2e(ir,fpregs)); + default: + return(PA83_UNIMP_EXCP); + } +} + + +static u_int +decode_0c(u_int ir, u_int class, u_int subop, u_int fpregs[]) +{ + u_int r1,r2,t; /* operand register offsets */ + u_int fmt; /* also sf for class 1 conversions */ + u_int df; /* for class 1 conversions */ + u_int *status; + u_int retval, local_status; + u_int fpu_type_flags; + + if (ir == COPR_INST) { + fpregs[0] = EMULATION_VERSION << 11; + return(NOEXCEPTION); + } + status = &fpregs[0]; /* fp status register */ + local_status = fpregs[0]; /* and local copy */ + r1 = extru(ir,fpr1pos,5) * sizeof(double)/sizeof(u_int); + if (r1 == 0) /* map fr0 source to constant zero */ + r1 = fpzeroreg; + t = extru(ir,fptpos,5) * sizeof(double)/sizeof(u_int); + if (t == 0 && class != 2) /* don't allow fr0 as a dest */ + return(MAJOR_0C_EXCP); + fmt = extru(ir,fpfmtpos,2); /* get fmt completer */ + + switch (class) { + case 0: + switch (subop) { + case 0: /* COPR 0,0 emulated above*/ + case 1: + return(MAJOR_0C_EXCP); + case 2: /* FCPY */ + switch (fmt) { + case 2: /* illegal */ + return(MAJOR_0C_EXCP); + case 3: /* quad */ + t &= ~3; /* force to even reg #s */ + r1 &= ~3; + fpregs[t+3] = fpregs[r1+3]; + fpregs[t+2] = fpregs[r1+2]; + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + fpregs[t] = fpregs[r1]; + return(NOEXCEPTION); + } + case 3: /* FABS */ + switch (fmt) { + case 2: /* illegal */ + return(MAJOR_0C_EXCP); + case 3: /* quad */ + t &= ~3; /* force to even reg #s */ + r1 &= ~3; + fpregs[t+3] = fpregs[r1+3]; + fpregs[t+2] = fpregs[r1+2]; + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + /* copy and clear sign bit */ + fpregs[t] = fpregs[r1] & 0x7fffffff; + return(NOEXCEPTION); + } + case 6: /* FNEG */ + switch (fmt) { + case 2: /* illegal */ + return(MAJOR_0C_EXCP); + case 3: /* quad */ + t &= ~3; /* force to even reg #s */ + r1 &= ~3; + fpregs[t+3] = fpregs[r1+3]; + fpregs[t+2] = fpregs[r1+2]; + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + /* copy and invert sign bit */ + fpregs[t] = fpregs[r1] ^ 0x80000000; + return(NOEXCEPTION); + } + case 7: /* FNEGABS */ + switch (fmt) { + case 2: /* illegal */ + return(MAJOR_0C_EXCP); + case 3: /* quad */ + t &= ~3; /* force to even reg #s */ + r1 &= ~3; + fpregs[t+3] = fpregs[r1+3]; + fpregs[t+2] = fpregs[r1+2]; + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + /* copy and set sign bit */ + fpregs[t] = fpregs[r1] | 0x80000000; + return(NOEXCEPTION); + } + case 4: /* FSQRT */ + switch (fmt) { + case 0: + return(sgl_fsqrt(&fpregs[r1],0, + &fpregs[t],status)); + case 1: + return(dbl_fsqrt(&fpregs[r1],0, + &fpregs[t],status)); + case 2: + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 5: /* FRND */ + switch (fmt) { + case 0: + return(sgl_frnd(&fpregs[r1],0, + &fpregs[t],status)); + case 1: + return(dbl_frnd(&fpregs[r1],0, + &fpregs[t],status)); + case 2: + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + } /* end of switch (subop) */ + + case 1: /* class 1 */ + df = extru(ir,fpdfpos,2); /* get dest format */ + if ((df & 2) || (fmt & 2)) { + /* + * fmt's 2 and 3 are illegal of not implemented + * quad conversions + */ + return(MAJOR_0C_EXCP); + } + /* + * encode source and dest formats into 2 bits. + * high bit is source, low bit is dest. + * bit = 1 --> double precision + */ + fmt = (fmt << 1) | df; + switch (subop) { + case 0: /* FCNVFF */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(MAJOR_0C_EXCP); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvff(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvff(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(MAJOR_0C_EXCP); + } + case 1: /* FCNVXF */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + } + case 2: /* FCNVFX */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + } + case 3: /* FCNVFXT */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + } + case 5: /* FCNVUF (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + } + case 6: /* FCNVFU (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + } + case 7: /* FCNVFUT (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + } + case 4: /* undefined */ + return(MAJOR_0C_EXCP); + } /* end of switch subop */ + + case 2: /* class 2 */ + fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS]; + r2 = extru(ir, fpr2pos, 5) * sizeof(double)/sizeof(u_int); + if (r2 == 0) + r2 = fpzeroreg; + if (fpu_type_flags & PA2_0_FPU_FLAG) { + /* FTEST if nullify bit set, otherwise FCMP */ + if (extru(ir, fpnulpos, 1)) { /* FTEST */ + switch (fmt) { + case 0: + /* + * arg0 is not used + * second param is the t field used for + * ftest,acc and ftest,rej + * third param is the subop (y-field) + */ + BUG(); + /* Unsupported + * return(ftest(0L,extru(ir,fptpos,5), + * &fpregs[0],subop)); + */ + case 1: + case 2: + case 3: + return(MAJOR_0C_EXCP); + } + } else { /* FCMP */ + switch (fmt) { + case 0: + retval = sgl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 1: + retval = dbl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + } + } /* end of if for PA2.0 */ + else { /* PA1.0 & PA1.1 */ + switch (subop) { + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + return(MAJOR_0C_EXCP); + case 0: /* FCMP */ + switch (fmt) { + case 0: + retval = sgl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 1: + retval = dbl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 1: /* FTEST */ + switch (fmt) { + case 0: + /* + * arg0 is not used + * second param is the t field used for + * ftest,acc and ftest,rej + * third param is the subop (y-field) + */ + BUG(); + /* unsupported + * return(ftest(0L,extru(ir,fptpos,5), + * &fpregs[0],subop)); + */ + case 1: + case 2: + case 3: + return(MAJOR_0C_EXCP); + } + } /* end of switch subop */ + } /* end of else for PA1.0 & PA1.1 */ + case 3: /* class 3 */ + r2 = extru(ir,fpr2pos,5) * sizeof(double)/sizeof(u_int); + if (r2 == 0) + r2 = fpzeroreg; + switch (subop) { + case 5: + case 6: + case 7: + return(MAJOR_0C_EXCP); + + case 0: /* FADD */ + switch (fmt) { + case 0: + return(sgl_fadd(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fadd(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 1: /* FSUB */ + switch (fmt) { + case 0: + return(sgl_fsub(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fsub(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 2: /* FMPY */ + switch (fmt) { + case 0: + return(sgl_fmpy(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fmpy(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 3: /* FDIV */ + switch (fmt) { + case 0: + return(sgl_fdiv(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fdiv(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + case 4: /* FREM */ + switch (fmt) { + case 0: + return(sgl_frem(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_frem(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 2: /* illegal */ + case 3: /* quad not implemented */ + return(MAJOR_0C_EXCP); + } + } /* end of class 3 switch */ + } /* end of switch(class) */ + + /* If we get here, something is really wrong! */ + return(MAJOR_0C_EXCP); +} + +static u_int +decode_0e(ir,class,subop,fpregs) +u_int ir,class,subop; +u_int fpregs[]; +{ + u_int r1,r2,t; /* operand register offsets */ + u_int fmt; /* also sf for class 1 conversions */ + u_int df; /* dest format for class 1 conversions */ + u_int *status; + u_int retval, local_status; + u_int fpu_type_flags; + + status = &fpregs[0]; + local_status = fpregs[0]; + r1 = ((extru(ir,fpr1pos,5)<<1)|(extru(ir,fpxr1pos,1))); + if (r1 == 0) + r1 = fpzeroreg; + t = ((extru(ir,fptpos,5)<<1)|(extru(ir,fpxtpos,1))); + if (t == 0 && class != 2) + return(MAJOR_0E_EXCP); + if (class < 2) /* class 0 or 1 has 2 bit fmt */ + fmt = extru(ir,fpfmtpos,2); + else /* class 2 and 3 have 1 bit fmt */ + fmt = extru(ir,fp0efmtpos,1); + /* + * An undefined combination, double precision accessing the + * right half of a FPR, can get us into trouble. + * Let's just force proper alignment on it. + */ + if (fmt == DBL) { + r1 &= ~1; + if (class != 1) + t &= ~1; + } + + switch (class) { + case 0: + switch (subop) { + case 0: /* unimplemented */ + case 1: + return(MAJOR_0E_EXCP); + case 2: /* FCPY */ + switch (fmt) { + case 2: + case 3: + return(MAJOR_0E_EXCP); + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + fpregs[t] = fpregs[r1]; + return(NOEXCEPTION); + } + case 3: /* FABS */ + switch (fmt) { + case 2: + case 3: + return(MAJOR_0E_EXCP); + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + fpregs[t] = fpregs[r1] & 0x7fffffff; + return(NOEXCEPTION); + } + case 6: /* FNEG */ + switch (fmt) { + case 2: + case 3: + return(MAJOR_0E_EXCP); + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + fpregs[t] = fpregs[r1] ^ 0x80000000; + return(NOEXCEPTION); + } + case 7: /* FNEGABS */ + switch (fmt) { + case 2: + case 3: + return(MAJOR_0E_EXCP); + case 1: /* double */ + fpregs[t+1] = fpregs[r1+1]; + case 0: /* single */ + fpregs[t] = fpregs[r1] | 0x80000000; + return(NOEXCEPTION); + } + case 4: /* FSQRT */ + switch (fmt) { + case 0: + return(sgl_fsqrt(&fpregs[r1],0, + &fpregs[t], status)); + case 1: + return(dbl_fsqrt(&fpregs[r1],0, + &fpregs[t], status)); + case 2: + case 3: + return(MAJOR_0E_EXCP); + } + case 5: /* FRMD */ + switch (fmt) { + case 0: + return(sgl_frnd(&fpregs[r1],0, + &fpregs[t], status)); + case 1: + return(dbl_frnd(&fpregs[r1],0, + &fpregs[t], status)); + case 2: + case 3: + return(MAJOR_0E_EXCP); + } + } /* end of switch (subop */ + + case 1: /* class 1 */ + df = extru(ir,fpdfpos,2); /* get dest format */ + /* + * Fix Crashme problem (writing to 31R in double precision) + * here too. + */ + if (df == DBL) { + t &= ~1; + } + if ((df & 2) || (fmt & 2)) + return(MAJOR_0E_EXCP); + + fmt = (fmt << 1) | df; + switch (subop) { + case 0: /* FCNVFF */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(MAJOR_0E_EXCP); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvff(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvff(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(MAJOR_0E_EXCP); + } + case 1: /* FCNVXF */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvxf(&fpregs[r1],0, + &fpregs[t],status)); + } + case 2: /* FCNVFX */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfx(&fpregs[r1],0, + &fpregs[t],status)); + } + case 3: /* FCNVFXT */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfxt(&fpregs[r1],0, + &fpregs[t],status)); + } + case 5: /* FCNVUF (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvuf(&fpregs[r1],0, + &fpregs[t],status)); + } + case 6: /* FCNVFU (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfu(&fpregs[r1],0, + &fpregs[t],status)); + } + case 7: /* FCNVFUT (PA2.0 only) */ + switch(fmt) { + case 0: /* sgl/sgl */ + return(sgl_to_sgl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 1: /* sgl/dbl */ + return(sgl_to_dbl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 2: /* dbl/sgl */ + return(dbl_to_sgl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + case 3: /* dbl/dbl */ + return(dbl_to_dbl_fcnvfut(&fpregs[r1],0, + &fpregs[t],status)); + } + case 4: /* undefined */ + return(MAJOR_0C_EXCP); + } /* end of switch subop */ + case 2: /* class 2 */ + /* + * Be careful out there. + * Crashme can generate cases where FR31R is specified + * as the source or target of a double precision operation. + * Since we just pass the address of the floating-point + * register to the emulation routines, this can cause + * corruption of fpzeroreg. + */ + if (fmt == DBL) + r2 = (extru(ir,fpr2pos,5)<<1); + else + r2 = ((extru(ir,fpr2pos,5)<<1)|(extru(ir,fpxr2pos,1))); + fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS]; + if (r2 == 0) + r2 = fpzeroreg; + if (fpu_type_flags & PA2_0_FPU_FLAG) { + /* FTEST if nullify bit set, otherwise FCMP */ + if (extru(ir, fpnulpos, 1)) { /* FTEST */ + /* not legal */ + return(MAJOR_0E_EXCP); + } else { /* FCMP */ + switch (fmt) { + /* + * fmt is only 1 bit long + */ + case 0: + retval = sgl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 1: + retval = dbl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + } + } + } /* end of if for PA2.0 */ + else { /* PA1.0 & PA1.1 */ + switch (subop) { + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + return(MAJOR_0E_EXCP); + case 0: /* FCMP */ + switch (fmt) { + /* + * fmt is only 1 bit long + */ + case 0: + retval = sgl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + case 1: + retval = dbl_fcmp(&fpregs[r1], + &fpregs[r2],extru(ir,fptpos,5), + &local_status); + update_status_cbit(status,local_status, + fpu_type_flags, subop); + return(retval); + } + } /* end of switch subop */ + } /* end of else for PA1.0 & PA1.1 */ + case 3: /* class 3 */ + /* + * Be careful out there. + * Crashme can generate cases where FR31R is specified + * as the source or target of a double precision operation. + * Since we just pass the address of the floating-point + * register to the emulation routines, this can cause + * corruption of fpzeroreg. + */ + if (fmt == DBL) + r2 = (extru(ir,fpr2pos,5)<<1); + else + r2 = ((extru(ir,fpr2pos,5)<<1)|(extru(ir,fpxr2pos,1))); + if (r2 == 0) + r2 = fpzeroreg; + switch (subop) { + case 5: + case 6: + case 7: + return(MAJOR_0E_EXCP); + + /* + * Note that fmt is only 1 bit for class 3 */ + case 0: /* FADD */ + switch (fmt) { + case 0: + return(sgl_fadd(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fadd(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + } + case 1: /* FSUB */ + switch (fmt) { + case 0: + return(sgl_fsub(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fsub(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + } + case 2: /* FMPY or XMPYU */ + /* + * check for integer multiply (x bit set) + */ + if (extru(ir,fpxpos,1)) { + /* + * emulate XMPYU + */ + switch (fmt) { + case 0: + /* + * bad instruction if t specifies + * the right half of a register + */ + if (t & 1) + return(MAJOR_0E_EXCP); + BUG(); + /* unsupported + * impyu(&fpregs[r1],&fpregs[r2], + * &fpregs[t]); + */ + return(NOEXCEPTION); + case 1: + return(MAJOR_0E_EXCP); + } + } + else { /* FMPY */ + switch (fmt) { + case 0: + return(sgl_fmpy(&fpregs[r1], + &fpregs[r2],&fpregs[t],status)); + case 1: + return(dbl_fmpy(&fpregs[r1], + &fpregs[r2],&fpregs[t],status)); + } + } + case 3: /* FDIV */ + switch (fmt) { + case 0: + return(sgl_fdiv(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_fdiv(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + } + case 4: /* FREM */ + switch (fmt) { + case 0: + return(sgl_frem(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + case 1: + return(dbl_frem(&fpregs[r1],&fpregs[r2], + &fpregs[t],status)); + } + } /* end of class 3 switch */ + } /* end of switch(class) */ + + /* If we get here, something is really wrong! */ + return(MAJOR_0E_EXCP); +} + + +/* + * routine to decode the 06 (FMPYADD and FMPYCFXT) instruction + */ +static u_int +decode_06(ir,fpregs) +u_int ir; +u_int fpregs[]; +{ + u_int rm1, rm2, tm, ra, ta; /* operands */ + u_int fmt; + u_int error = 0; + u_int status; + u_int fpu_type_flags; + union { + double dbl; + float flt; + struct { u_int i1; u_int i2; } ints; + } mtmp, atmp; + + + status = fpregs[0]; /* use a local copy of status reg */ + fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS]; /* get fpu type flags */ + fmt = extru(ir, fpmultifmt, 1); /* get sgl/dbl flag */ + if (fmt == 0) { /* DBL */ + rm1 = extru(ir, fprm1pos, 5) * sizeof(double)/sizeof(u_int); + if (rm1 == 0) + rm1 = fpzeroreg; + rm2 = extru(ir, fprm2pos, 5) * sizeof(double)/sizeof(u_int); + if (rm2 == 0) + rm2 = fpzeroreg; + tm = extru(ir, fptmpos, 5) * sizeof(double)/sizeof(u_int); + if (tm == 0) + return(MAJOR_06_EXCP); + ra = extru(ir, fprapos, 5) * sizeof(double)/sizeof(u_int); + ta = extru(ir, fptapos, 5) * sizeof(double)/sizeof(u_int); + if (ta == 0) + return(MAJOR_06_EXCP); + + if (fpu_type_flags & TIMEX_ROLEX_FPU_MASK) { + + if (ra == 0) { + /* special case FMPYCFXT, see sgl case below */ + if (dbl_fmpy(&fpregs[rm1],&fpregs[rm2], + &mtmp.ints.i1,&status)) + error = 1; + if (dbl_to_sgl_fcnvfxt(&fpregs[ta], + &atmp.ints.i1,&atmp.ints.i1,&status)) + error = 1; + } + else { + + if (dbl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1, + &status)) + error = 1; + if (dbl_fadd(&fpregs[ta], &fpregs[ra], &atmp.ints.i1, + &status)) + error = 1; + } + } + + else + + { + if (ra == 0) + ra = fpzeroreg; + + if (dbl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1, + &status)) + error = 1; + if (dbl_fadd(&fpregs[ta], &fpregs[ra], &atmp.ints.i1, + &status)) + error = 1; + + } + + if (error) + return(MAJOR_06_EXCP); + else { + /* copy results */ + fpregs[tm] = mtmp.ints.i1; + fpregs[tm+1] = mtmp.ints.i2; + fpregs[ta] = atmp.ints.i1; + fpregs[ta+1] = atmp.ints.i2; + fpregs[0] = status; + return(NOEXCEPTION); + } + } + else { /* SGL */ + /* + * calculate offsets for single precision numbers + * See table 6-14 in PA-89 architecture for mapping + */ + rm1 = (extru(ir,fprm1pos,4) | 0x10 ) << 1; /* get offset */ + rm1 |= extru(ir,fprm1pos-4,1); /* add right word offset */ + + rm2 = (extru(ir,fprm2pos,4) | 0x10 ) << 1; /* get offset */ + rm2 |= extru(ir,fprm2pos-4,1); /* add right word offset */ + + tm = (extru(ir,fptmpos,4) | 0x10 ) << 1; /* get offset */ + tm |= extru(ir,fptmpos-4,1); /* add right word offset */ + + ra = (extru(ir,fprapos,4) | 0x10 ) << 1; /* get offset */ + ra |= extru(ir,fprapos-4,1); /* add right word offset */ + + ta = (extru(ir,fptapos,4) | 0x10 ) << 1; /* get offset */ + ta |= extru(ir,fptapos-4,1); /* add right word offset */ + + if (ra == 0x20 &&(fpu_type_flags & TIMEX_ROLEX_FPU_MASK)) { + /* special case FMPYCFXT (really 0) + * This instruction is only present on the Timex and + * Rolex fpu's in so if it is the special case and + * one of these fpu's we run the FMPYCFXT instruction + */ + if (sgl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1, + &status)) + error = 1; + if (sgl_to_sgl_fcnvfxt(&fpregs[ta],&atmp.ints.i1, + &atmp.ints.i1,&status)) + error = 1; + } + else { + if (sgl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1, + &status)) + error = 1; + if (sgl_fadd(&fpregs[ta], &fpregs[ra], &atmp.ints.i1, + &status)) + error = 1; + } + if (error) + return(MAJOR_06_EXCP); + else { + /* copy results */ + fpregs[tm] = mtmp.ints.i1; + fpregs[ta] = atmp.ints.i1; + fpregs[0] = status; + return(NOEXCEPTION); + } + } +} + +/* + * routine to decode the 26 (FMPYSUB) instruction + */ +static u_int +decode_26(ir,fpregs) +u_int ir; +u_int fpregs[]; +{ + u_int rm1, rm2, tm, ra, ta; /* operands */ + u_int fmt; + u_int error = 0; + u_int status; + union { + double dbl; + float flt; + struct { u_int i1; u_int i2; } ints; + } mtmp, atmp; + + + status = fpregs[0]; + fmt = extru(ir, fpmultifmt, 1); /* get sgl/dbl flag */ + if (fmt == 0) { /* DBL */ + rm1 = extru(ir, fprm1pos, 5) * sizeof(double)/sizeof(u_int); + if (rm1 == 0) + rm1 = fpzeroreg; + rm2 = extru(ir, fprm2pos, 5) * sizeof(double)/sizeof(u_int); + if (rm2 == 0) + rm2 = fpzeroreg; + tm = extru(ir, fptmpos, 5) * sizeof(double)/sizeof(u_int); + if (tm == 0) + return(MAJOR_26_EXCP); + ra = extru(ir, fprapos, 5) * sizeof(double)/sizeof(u_int); + if (ra == 0) + return(MAJOR_26_EXCP); + ta = extru(ir, fptapos, 5) * sizeof(double)/sizeof(u_int); + if (ta == 0) + return(MAJOR_26_EXCP); + + if (dbl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1,&status)) + error = 1; + if (dbl_fsub(&fpregs[ta], &fpregs[ra], &atmp.ints.i1,&status)) + error = 1; + if (error) + return(MAJOR_26_EXCP); + else { + /* copy results */ + fpregs[tm] = mtmp.ints.i1; + fpregs[tm+1] = mtmp.ints.i2; + fpregs[ta] = atmp.ints.i1; + fpregs[ta+1] = atmp.ints.i2; + fpregs[0] = status; + return(NOEXCEPTION); + } + } + else { /* SGL */ + /* + * calculate offsets for single precision numbers + * See table 6-14 in PA-89 architecture for mapping + */ + rm1 = (extru(ir,fprm1pos,4) | 0x10 ) << 1; /* get offset */ + rm1 |= extru(ir,fprm1pos-4,1); /* add right word offset */ + + rm2 = (extru(ir,fprm2pos,4) | 0x10 ) << 1; /* get offset */ + rm2 |= extru(ir,fprm2pos-4,1); /* add right word offset */ + + tm = (extru(ir,fptmpos,4) | 0x10 ) << 1; /* get offset */ + tm |= extru(ir,fptmpos-4,1); /* add right word offset */ + + ra = (extru(ir,fprapos,4) | 0x10 ) << 1; /* get offset */ + ra |= extru(ir,fprapos-4,1); /* add right word offset */ + + ta = (extru(ir,fptapos,4) | 0x10 ) << 1; /* get offset */ + ta |= extru(ir,fptapos-4,1); /* add right word offset */ + + if (sgl_fmpy(&fpregs[rm1],&fpregs[rm2],&mtmp.ints.i1,&status)) + error = 1; + if (sgl_fsub(&fpregs[ta], &fpregs[ra], &atmp.ints.i1,&status)) + error = 1; + if (error) + return(MAJOR_26_EXCP); + else { + /* copy results */ + fpregs[tm] = mtmp.ints.i1; + fpregs[ta] = atmp.ints.i1; + fpregs[0] = status; + return(NOEXCEPTION); + } + } + +} + +/* + * routine to decode the 2E (FMPYFADD,FMPYNFADD) instructions + */ +static u_int +decode_2e(ir,fpregs) +u_int ir; +u_int fpregs[]; +{ + u_int rm1, rm2, ra, t; /* operands */ + u_int fmt; + + fmt = extru(ir,fpfmtpos,1); /* get fmt completer */ + if (fmt == DBL) { /* DBL */ + rm1 = extru(ir,fprm1pos,5) * sizeof(double)/sizeof(u_int); + if (rm1 == 0) + rm1 = fpzeroreg; + rm2 = extru(ir,fprm2pos,5) * sizeof(double)/sizeof(u_int); + if (rm2 == 0) + rm2 = fpzeroreg; + ra = ((extru(ir,fpraupos,3)<<2)|(extru(ir,fpralpos,3)>>1)) * + sizeof(double)/sizeof(u_int); + if (ra == 0) + ra = fpzeroreg; + t = extru(ir,fptpos,5) * sizeof(double)/sizeof(u_int); + if (t == 0) + return(MAJOR_2E_EXCP); + + if (extru(ir,fpfusedsubop,1)) { /* fmpyfadd or fmpynfadd? */ + return(dbl_fmpynfadd(&fpregs[rm1], &fpregs[rm2], + &fpregs[ra], &fpregs[0], &fpregs[t])); + } else { + return(dbl_fmpyfadd(&fpregs[rm1], &fpregs[rm2], + &fpregs[ra], &fpregs[0], &fpregs[t])); + } + } /* end DBL */ + else { /* SGL */ + rm1 = (extru(ir,fprm1pos,5)<<1)|(extru(ir,fpxrm1pos,1)); + if (rm1 == 0) + rm1 = fpzeroreg; + rm2 = (extru(ir,fprm2pos,5)<<1)|(extru(ir,fpxrm2pos,1)); + if (rm2 == 0) + rm2 = fpzeroreg; + ra = (extru(ir,fpraupos,3)<<3)|extru(ir,fpralpos,3); + if (ra == 0) + ra = fpzeroreg; + t = ((extru(ir,fptpos,5)<<1)|(extru(ir,fpxtpos,1))); + if (t == 0) + return(MAJOR_2E_EXCP); + + if (extru(ir,fpfusedsubop,1)) { /* fmpyfadd or fmpynfadd? */ + return(sgl_fmpynfadd(&fpregs[rm1], &fpregs[rm2], + &fpregs[ra], &fpregs[0], &fpregs[t])); + } else { + return(sgl_fmpyfadd(&fpregs[rm1], &fpregs[rm2], + &fpregs[ra], &fpregs[0], &fpregs[t])); + } + } /* end SGL */ +} + +/* + * update_status_cbit + * + * This routine returns the correct FP status register value in + * *status, based on the C-bit & V-bit returned by the FCMP + * emulation routine in new_status. The architecture type + * (PA83, PA89 or PA2.0) is available in fpu_type. The y_field + * and the architecture type are used to determine what flavor + * of FCMP is being emulated. + */ +static void +update_status_cbit(status, new_status, fpu_type, y_field) +u_int *status, new_status; +u_int fpu_type; +u_int y_field; +{ + /* + * For PA89 FPU's which implement the Compare Queue and + * for PA2.0 FPU's, update the Compare Queue if the y-field = 0, + * otherwise update the specified bit in the Compare Array. + * Note that the y-field will always be 0 for non-PA2.0 FPU's. + */ + if ((fpu_type & TIMEX_EXTEN_FLAG) || + (fpu_type & ROLEX_EXTEN_FLAG) || + (fpu_type & PA2_0_FPU_FLAG)) { + if (y_field == 0) { + *status = ((*status & 0x04000000) >> 5) | /* old Cbit */ + ((*status & 0x003ff000) >> 1) | /* old CQ */ + (new_status & 0xffc007ff); /* all other bits*/ + } else { + *status = (*status & 0x04000000) | /* old Cbit */ + ((new_status & 0x04000000) >> (y_field+4)) | + (new_status & ~0x04000000 & /* other bits */ + ~(0x04000000 >> (y_field+4))); + } + } + /* if PA83, just update the C-bit */ + else { + *status = new_status; + } +} diff --git a/arch/parisc/math-emu/frnd.c b/arch/parisc/math-emu/frnd.c new file mode 100644 index 000000000000..904b3844bf26 --- /dev/null +++ b/arch/parisc/math-emu/frnd.c @@ -0,0 +1,252 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * Purpose: + * Single Floating-point Round to Integer + * Double Floating-point Round to Integer + * Quad Floating-point Round to Integer (returns unimplemented) + * + * External Interfaces: + * dbl_frnd(srcptr,nullptr,dstptr,status) + * sgl_frnd(srcptr,nullptr,dstptr,status) + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" +#include "dbl_float.h" +#include "cnv_float.h" + +/* + * Single Floating-point Round to Integer + */ + +/*ARGSUSED*/ +int +sgl_frnd(sgl_floating_point *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int src, result; + register int src_exponent; + register boolean inexact = FALSE; + + src = *srcptr; + /* + * check source operand for NaN or infinity + */ + if ((src_exponent = Sgl_exponent(src)) == SGL_INFINITY_EXPONENT) { + /* + * is signaling NaN? + */ + if (Sgl_isone_signaling(src)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(src); + } + /* + * return quiet NaN or infinity + */ + *dstptr = src; + return(NOEXCEPTION); + } + /* + * Need to round? + */ + if ((src_exponent -= SGL_BIAS) >= SGL_P - 1) { + *dstptr = src; + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + Sgl_clear_exponent_set_hidden(src); + result = src; + Sgl_rightshift(result,(SGL_P-1) - (src_exponent)); + /* check for inexact */ + if (Sgl_isinexact_to_fix(src,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) Sgl_increment(result); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) Sgl_increment(result); + break; + case ROUNDNEAREST: + if (Sgl_isone_roundbit(src,src_exponent)) + if (Sgl_isone_stickybit(src,src_exponent) + || (Sgl_isone_lowmantissa(result))) + Sgl_increment(result); + } + } + Sgl_leftshift(result,(SGL_P-1) - (src_exponent)); + if (Sgl_isone_hiddenoverflow(result)) + Sgl_set_exponent(result,src_exponent + (SGL_BIAS+1)); + else Sgl_set_exponent(result,src_exponent + SGL_BIAS); + } + else { + result = src; /* set sign */ + Sgl_setzero_exponentmantissa(result); + /* check for inexact */ + if (Sgl_isnotzero_exponentmantissa(src)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(src)) + Sgl_set_exponent(result,SGL_BIAS); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(src)) + Sgl_set_exponent(result,SGL_BIAS); + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Sgl_isnotzero_mantissa(src)) + Sgl_set_exponent(result,SGL_BIAS); + } + } + } + *dstptr = result; + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} + +/* + * Double Floating-point Round to Integer + */ + +/*ARGSUSED*/ +int +dbl_frnd( + dbl_floating_point *srcptr, + unsigned int *nullptr, + dbl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int srcp1, srcp2, resultp1, resultp2; + register int src_exponent; + register boolean inexact = FALSE; + + Dbl_copyfromptr(srcptr,srcp1,srcp2); + /* + * check source operand for NaN or infinity + */ + if ((src_exponent = Dbl_exponent(srcp1)) == DBL_INFINITY_EXPONENT) { + /* + * is signaling NaN? + */ + if (Dbl_isone_signaling(srcp1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Dbl_set_quiet(srcp1); + } + /* + * return quiet NaN or infinity + */ + Dbl_copytoptr(srcp1,srcp2,dstptr); + return(NOEXCEPTION); + } + /* + * Need to round? + */ + if ((src_exponent -= DBL_BIAS) >= DBL_P - 1) { + Dbl_copytoptr(srcp1,srcp2,dstptr); + return(NOEXCEPTION); + } + /* + * Generate result + */ + if (src_exponent >= 0) { + Dbl_clear_exponent_set_hidden(srcp1); + resultp1 = srcp1; + resultp2 = srcp2; + Dbl_rightshift(resultp1,resultp2,(DBL_P-1) - (src_exponent)); + /* check for inexact */ + if (Dbl_isinexact_to_fix(srcp1,srcp2,src_exponent)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) + Dbl_increment(resultp1,resultp2); + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) + Dbl_increment(resultp1,resultp2); + break; + case ROUNDNEAREST: + if (Dbl_isone_roundbit(srcp1,srcp2,src_exponent)) + if (Dbl_isone_stickybit(srcp1,srcp2,src_exponent) + || (Dbl_isone_lowmantissap2(resultp2))) + Dbl_increment(resultp1,resultp2); + } + } + Dbl_leftshift(resultp1,resultp2,(DBL_P-1) - (src_exponent)); + if (Dbl_isone_hiddenoverflow(resultp1)) + Dbl_set_exponent(resultp1,src_exponent + (DBL_BIAS+1)); + else Dbl_set_exponent(resultp1,src_exponent + DBL_BIAS); + } + else { + resultp1 = srcp1; /* set sign */ + Dbl_setzero_exponentmantissa(resultp1,resultp2); + /* check for inexact */ + if (Dbl_isnotzero_exponentmantissa(srcp1,srcp2)) { + inexact = TRUE; + /* round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Dbl_iszero_sign(srcp1)) + Dbl_set_exponent(resultp1,DBL_BIAS); + break; + case ROUNDMINUS: + if (Dbl_isone_sign(srcp1)) + Dbl_set_exponent(resultp1,DBL_BIAS); + break; + case ROUNDNEAREST: + if (src_exponent == -1) + if (Dbl_isnotzero_mantissa(srcp1,srcp2)) + Dbl_set_exponent(resultp1,DBL_BIAS); + } + } + } + Dbl_copytoptr(resultp1,resultp2,dstptr); + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/hppa.h b/arch/parisc/math-emu/hppa.h new file mode 100644 index 000000000000..5d3d52f7323a --- /dev/null +++ b/arch/parisc/math-emu/hppa.h @@ -0,0 +1,42 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + + +/* amount is assumed to be a constant between 0 and 32 (non-inclusive) */ +#define Shiftdouble(left,right,amount,dest) \ + /* int left, right, amount, dest; */ \ + dest = ((left) << (32-(amount))) | ((unsigned int)(right) >> (amount)) + +/* amount must be less than 32 */ +#define Variableshiftdouble(left,right,amount,dest) \ + /* unsigned int left, right; int amount, dest; */ \ + if (amount == 0) dest = right; \ + else dest = ((((unsigned) left)&0x7fffffff) << (32-(amount))) | \ + ((unsigned) right >> (amount)) + +/* amount must be between 0 and 32 (non-inclusive) */ +#define Variable_shift_double(left,right,amount,dest) \ + /* unsigned int left, right; int amount, dest; */ \ + dest = (left << (32-(amount))) | ((unsigned) right >> (amount)) diff --git a/arch/parisc/math-emu/math-emu.h b/arch/parisc/math-emu/math-emu.h new file mode 100644 index 000000000000..3a99f5929291 --- /dev/null +++ b/arch/parisc/math-emu/math-emu.h @@ -0,0 +1,27 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _PARISC_MATH_EMU_H +#define _PARISC_MATH_EMU_H + +#include +extern int handle_fpe(struct pt_regs *regs); + +#endif diff --git a/arch/parisc/math-emu/sfadd.c b/arch/parisc/math-emu/sfadd.c new file mode 100644 index 000000000000..008d721b5d22 --- /dev/null +++ b/arch/parisc/math-emu/sfadd.c @@ -0,0 +1,518 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfadd.c $Revision: 1.1 $ + * + * Purpose: + * Single_add: add two single precision values. + * + * External Interfaces: + * sgl_fadd(leftptr, rightptr, dstptr, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single_add: add two single precision values. + */ +int +sgl_fadd( + sgl_floating_point *leftptr, + sgl_floating_point *rightptr, + sgl_floating_point *dstptr, + unsigned int *status) + { + register unsigned int left, right, result, extent; + register unsigned int signless_upper_left, signless_upper_right, save; + + + register int result_exponent, right_exponent, diff_exponent; + register int sign_save, jumpsize; + register boolean inexact = FALSE; + register boolean underflowtrap; + + /* Create local copies of the numbers */ + left = *leftptr; + right = *rightptr; + + /* A zero "save" helps discover equal operands (for later), * + * and is used in swapping operands (if needed). */ + Sgl_xortointp1(left,right,/*to*/save); + + /* + * check first operand for NaN's or infinity + */ + if ((result_exponent = Sgl_exponent(left)) == SGL_INFINITY_EXPONENT) + { + if (Sgl_iszero_mantissa(left)) + { + if (Sgl_isnotnan(right)) + { + if (Sgl_isinfinity(right) && save!=0) + { + /* + * invalid since operands are opposite signed infinity's + */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * return infinity + */ + *dstptr = left; + return(NOEXCEPTION); + } + } + else + { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(left)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(left); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(right)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(right); + *dstptr = right; + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + *dstptr = left; + return(NOEXCEPTION); + } + } /* End left NaN or Infinity processing */ + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(right)) + { + if (Sgl_iszero_mantissa(right)) + { + /* return infinity */ + *dstptr = right; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(right)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(right); + } + /* + * return quiet NaN + */ + *dstptr = right; + return(NOEXCEPTION); + } /* End right NaN or Infinity processing */ + + /* Invariant: Must be dealing with finite numbers */ + + /* Compare operands by removing the sign */ + Sgl_copytoint_exponentmantissa(left,signless_upper_left); + Sgl_copytoint_exponentmantissa(right,signless_upper_right); + + /* sign difference selects add or sub operation. */ + if(Sgl_ismagnitudeless(signless_upper_left,signless_upper_right)) + { + /* Set the left operand to the larger one by XOR swap * + * First finish the first word using "save" */ + Sgl_xorfromintp1(save,right,/*to*/right); + Sgl_xorfromintp1(save,left,/*to*/left); + result_exponent = Sgl_exponent(left); + } + /* Invariant: left is not smaller than right. */ + + if((right_exponent = Sgl_exponent(right)) == 0) + { + /* Denormalized operands. First look for zeroes */ + if(Sgl_iszero_mantissa(right)) + { + /* right is zero */ + if(Sgl_iszero_exponentmantissa(left)) + { + /* Both operands are zeros */ + if(Is_rounding_mode(ROUNDMINUS)) + { + Sgl_or_signs(left,/*with*/right); + } + else + { + Sgl_and_signs(left,/*with*/right); + } + } + else + { + /* Left is not a zero and must be the result. Trapped + * underflows are signaled if left is denormalized. Result + * is always exact. */ + if( (result_exponent == 0) && Is_underflowtrap_enabled() ) + { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(left); + Sgl_leftshiftby1(left); + Sgl_normalize(left,result_exponent); + Sgl_set_sign(left,/*using*/sign_save); + Sgl_setwrapped_exponent(left,result_exponent,unfl); + *dstptr = left; + return(UNDERFLOWEXCEPTION); + } + } + *dstptr = left; + return(NOEXCEPTION); + } + + /* Neither are zeroes */ + Sgl_clear_sign(right); /* Exponent is already cleared */ + if(result_exponent == 0 ) + { + /* Both operands are denormalized. The result must be exact + * and is simply calculated. A sum could become normalized and a + * difference could cancel to a true zero. */ + if( (/*signed*/int) save < 0 ) + { + Sgl_subtract(left,/*minus*/right,/*into*/result); + if(Sgl_iszero_mantissa(result)) + { + if(Is_rounding_mode(ROUNDMINUS)) + { + Sgl_setone_sign(result); + } + else + { + Sgl_setzero_sign(result); + } + *dstptr = result; + return(NOEXCEPTION); + } + } + else + { + Sgl_addition(left,right,/*into*/result); + if(Sgl_isone_hidden(result)) + { + *dstptr = result; + return(NOEXCEPTION); + } + } + if(Is_underflowtrap_enabled()) + { + /* need to normalize result */ + sign_save = Sgl_signextendedsign(result); + Sgl_leftshiftby1(result); + Sgl_normalize(result,result_exponent); + Sgl_set_sign(result,/*using*/sign_save); + Sgl_setwrapped_exponent(result,result_exponent,unfl); + *dstptr = result; + return(UNDERFLOWEXCEPTION); + } + *dstptr = result; + return(NOEXCEPTION); + } + right_exponent = 1; /* Set exponent to reflect different bias + * with denomalized numbers. */ + } + else + { + Sgl_clear_signexponent_set_hidden(right); + } + Sgl_clear_exponent_set_hidden(left); + diff_exponent = result_exponent - right_exponent; + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for this + * infrequent case. + */ + if(diff_exponent > SGL_THRESHOLD) + { + diff_exponent = SGL_THRESHOLD; + } + + /* Align right operand by shifting to right */ + Sgl_right_align(/*operand*/right,/*shifted by*/diff_exponent, + /*and lower to*/extent); + + /* Treat sum and difference of the operands separately. */ + if( (/*signed*/int) save < 0 ) + { + /* + * Difference of the two operands. Their can be no overflow. A + * borrow can occur out of the hidden bit and force a post + * normalization phase. + */ + Sgl_subtract_withextension(left,/*minus*/right,/*with*/extent,/*into*/result); + if(Sgl_iszero_hidden(result)) + { + /* Handle normalization */ + /* A straight foward algorithm would now shift the result + * and extension left until the hidden bit becomes one. Not + * all of the extension bits need participate in the shift. + * Only the two most significant bits (round and guard) are + * needed. If only a single shift is needed then the guard + * bit becomes a significant low order bit and the extension + * must participate in the rounding. If more than a single + * shift is needed, then all bits to the right of the guard + * bit are zeros, and the guard bit may or may not be zero. */ + sign_save = Sgl_signextendedsign(result); + Sgl_leftshiftby1_withextent(result,extent,result); + + /* Need to check for a zero result. The sign and exponent + * fields have already been zeroed. The more efficient test + * of the full object can be used. + */ + if(Sgl_iszero(result)) + /* Must have been "x-x" or "x+(-x)". */ + { + if(Is_rounding_mode(ROUNDMINUS)) Sgl_setone_sign(result); + *dstptr = result; + return(NOEXCEPTION); + } + result_exponent--; + /* Look to see if normalization is finished. */ + if(Sgl_isone_hidden(result)) + { + if(result_exponent==0) + { + /* Denormalized, exponent should be zero. Left operand * + * was normalized, so extent (guard, round) was zero */ + goto underflow; + } + else + { + /* No further normalization is needed. */ + Sgl_set_sign(result,/*using*/sign_save); + Ext_leftshiftby1(extent); + goto round; + } + } + + /* Check for denormalized, exponent should be zero. Left * + * operand was normalized, so extent (guard, round) was zero */ + if(!(underflowtrap = Is_underflowtrap_enabled()) && + result_exponent==0) goto underflow; + + /* Shift extension to complete one bit of normalization and + * update exponent. */ + Ext_leftshiftby1(extent); + + /* Discover first one bit to determine shift amount. Use a + * modified binary search. We have already shifted the result + * one position right and still not found a one so the remainder + * of the extension must be zero and simplifies rounding. */ + /* Scan bytes */ + while(Sgl_iszero_hiddenhigh7mantissa(result)) + { + Sgl_leftshiftby8(result); + if((result_exponent -= 8) <= 0 && !underflowtrap) + goto underflow; + } + /* Now narrow it down to the nibble */ + if(Sgl_iszero_hiddenhigh3mantissa(result)) + { + /* The lower nibble contains the normalizing one */ + Sgl_leftshiftby4(result); + if((result_exponent -= 4) <= 0 && !underflowtrap) + goto underflow; + } + /* Select case were first bit is set (already normalized) + * otherwise select the proper shift. */ + if((jumpsize = Sgl_hiddenhigh3mantissa(result)) > 7) + { + /* Already normalized */ + if(result_exponent <= 0) goto underflow; + Sgl_set_sign(result,/*using*/sign_save); + Sgl_set_exponent(result,/*using*/result_exponent); + *dstptr = result; + return(NOEXCEPTION); + } + Sgl_sethigh4bits(result,/*using*/sign_save); + switch(jumpsize) + { + case 1: + { + Sgl_leftshiftby3(result); + result_exponent -= 3; + break; + } + case 2: + case 3: + { + Sgl_leftshiftby2(result); + result_exponent -= 2; + break; + } + case 4: + case 5: + case 6: + case 7: + { + Sgl_leftshiftby1(result); + result_exponent -= 1; + break; + } + } + if(result_exponent > 0) + { + Sgl_set_exponent(result,/*using*/result_exponent); + *dstptr = result; + return(NOEXCEPTION); /* Sign bit is already set */ + } + /* Fixup potential underflows */ + underflow: + if(Is_underflowtrap_enabled()) + { + Sgl_set_sign(result,sign_save); + Sgl_setwrapped_exponent(result,result_exponent,unfl); + *dstptr = result; + /* inexact = FALSE; */ + return(UNDERFLOWEXCEPTION); + } + /* + * Since we cannot get an inexact denormalized result, + * we can now return. + */ + Sgl_right_align(result,/*by*/(1-result_exponent),extent); + Sgl_clear_signexponent(result); + Sgl_set_sign(result,sign_save); + *dstptr = result; + return(NOEXCEPTION); + } /* end if(hidden...)... */ + /* Fall through and round */ + } /* end if(save < 0)... */ + else + { + /* Add magnitudes */ + Sgl_addition(left,right,/*to*/result); + if(Sgl_isone_hiddenoverflow(result)) + { + /* Prenormalization required. */ + Sgl_rightshiftby1_withextent(result,extent,extent); + Sgl_arithrightshiftby1(result); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...add magnitudes... */ + + /* Round the result. If the extension is all zeros,then the result is + * exact. Otherwise round in the correct direction. No underflow is + * possible. If a postnormalization is necessary, then the mantissa is + * all zeros so no shift is needed. */ + round: + if(Ext_isnotzero(extent)) + { + inexact = TRUE; + switch(Rounding_mode()) + { + case ROUNDNEAREST: /* The default. */ + if(Ext_isone_sign(extent)) + { + /* at least 1/2 ulp */ + if(Ext_isnotzero_lower(extent) || + Sgl_isone_lowmantissa(result)) + { + /* either exactly half way and odd or more than 1/2ulp */ + Sgl_increment(result); + } + } + break; + + case ROUNDPLUS: + if(Sgl_iszero_sign(result)) + { + /* Round up positive results */ + Sgl_increment(result); + } + break; + + case ROUNDMINUS: + if(Sgl_isone_sign(result)) + { + /* Round down negative results */ + Sgl_increment(result); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if(Sgl_isone_hiddenoverflow(result)) result_exponent++; + } + if(result_exponent == SGL_INFINITY_EXPONENT) + { + /* Overflow */ + if(Is_overflowtrap_enabled()) + { + Sgl_setwrapped_exponent(result,result_exponent,ovfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + else + { + Set_overflowflag(); + inexact = TRUE; + Sgl_setoverflow(result); + } + } + else Sgl_set_exponent(result,result_exponent); + *dstptr = result; + if(inexact) + if(Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); + } diff --git a/arch/parisc/math-emu/sfcmp.c b/arch/parisc/math-emu/sfcmp.c new file mode 100644 index 000000000000..1466fb46e4c0 --- /dev/null +++ b/arch/parisc/math-emu/sfcmp.c @@ -0,0 +1,155 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfcmp.c $Revision: 1.1 $ + * + * Purpose: + * sgl_cmp: compare two values + * + * External Interfaces: + * sgl_fcmp(leftptr, rightptr, cond, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * sgl_cmp: compare two values + */ +int +sgl_fcmp (sgl_floating_point * leftptr, sgl_floating_point * rightptr, + unsigned int cond, unsigned int *status) + + /* The predicate to be tested */ + + { + register unsigned int left, right; + register int xorresult; + + /* Create local copies of the numbers */ + left = *leftptr; + right = *rightptr; + + /* + * Test for NaN + */ + if( (Sgl_exponent(left) == SGL_INFINITY_EXPONENT) + || (Sgl_exponent(right) == SGL_INFINITY_EXPONENT) ) + { + /* Check if a NaN is involved. Signal an invalid exception when + * comparing a signaling NaN or when comparing quiet NaNs and the + * low bit of the condition is set */ + if( ( (Sgl_exponent(left) == SGL_INFINITY_EXPONENT) + && Sgl_isnotzero_mantissa(left) + && (Exception(cond) || Sgl_isone_signaling(left))) + || + ( (Sgl_exponent(right) == SGL_INFINITY_EXPONENT) + && Sgl_isnotzero_mantissa(right) + && (Exception(cond) || Sgl_isone_signaling(right)) ) ) + { + if( Is_invalidtrap_enabled() ) { + Set_status_cbit(Unordered(cond)); + return(INVALIDEXCEPTION); + } + else Set_invalidflag(); + Set_status_cbit(Unordered(cond)); + return(NOEXCEPTION); + } + /* All the exceptional conditions are handled, now special case + NaN compares */ + else if( ((Sgl_exponent(left) == SGL_INFINITY_EXPONENT) + && Sgl_isnotzero_mantissa(left)) + || + ((Sgl_exponent(right) == SGL_INFINITY_EXPONENT) + && Sgl_isnotzero_mantissa(right)) ) + { + /* NaNs always compare unordered. */ + Set_status_cbit(Unordered(cond)); + return(NOEXCEPTION); + } + /* infinities will drop down to the normal compare mechanisms */ + } + /* First compare for unequal signs => less or greater or + * special equal case */ + Sgl_xortointp1(left,right,xorresult); + if( xorresult < 0 ) + { + /* left negative => less, left positive => greater. + * equal is possible if both operands are zeros. */ + if( Sgl_iszero_exponentmantissa(left) + && Sgl_iszero_exponentmantissa(right) ) + { + Set_status_cbit(Equal(cond)); + } + else if( Sgl_isone_sign(left) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + /* Signs are the same. Treat negative numbers separately + * from the positives because of the reversed sense. */ + else if( Sgl_all(left) == Sgl_all(right) ) + { + Set_status_cbit(Equal(cond)); + } + else if( Sgl_iszero_sign(left) ) + { + /* Positive compare */ + if( Sgl_all(left) < Sgl_all(right) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + else + { + /* Negative compare. Signed or unsigned compares + * both work the same. That distinction is only + * important when the sign bits differ. */ + if( Sgl_all(left) > Sgl_all(right) ) + { + Set_status_cbit(Lessthan(cond)); + } + else + { + Set_status_cbit(Greaterthan(cond)); + } + } + return(NOEXCEPTION); + } diff --git a/arch/parisc/math-emu/sfdiv.c b/arch/parisc/math-emu/sfdiv.c new file mode 100644 index 000000000000..3e2a4d6daa9c --- /dev/null +++ b/arch/parisc/math-emu/sfdiv.c @@ -0,0 +1,392 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfdiv.c $Revision: 1.1 $ + * + * Purpose: + * Single Precision Floating-point Divide + * + * External Interfaces: + * sgl_fdiv(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single Precision Floating-point Divide + */ + +int +sgl_fdiv (sgl_floating_point * srcptr1, sgl_floating_point * srcptr2, + sgl_floating_point * dstptr, unsigned int *status) +{ + register unsigned int opnd1, opnd2, opnd3, result; + register int dest_exponent, count; + register boolean inexact = FALSE, guardbit = FALSE, stickybit = FALSE; + boolean is_tiny; + + opnd1 = *srcptr1; + opnd2 = *srcptr2; + /* + * set sign bit of result + */ + if (Sgl_sign(opnd1) ^ Sgl_sign(opnd2)) Sgl_setnegativezero(result); + else Sgl_setzero(result); + /* + * check first operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd1)) { + if (Sgl_iszero_mantissa(opnd1)) { + if (Sgl_isnotnan(opnd2)) { + if (Sgl_isinfinity(opnd2)) { + /* + * invalid since both operands + * are infinity + */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd1); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + *dstptr = opnd1; + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd2)) { + if (Sgl_iszero_mantissa(opnd2)) { + /* + * return zero + */ + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + } + /* + * return quiet NaN + */ + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * check for division by zero + */ + if (Sgl_iszero_exponentmantissa(opnd2)) { + if (Sgl_iszero_exponentmantissa(opnd1)) { + /* invalid since both operands are zero */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + if (Is_divisionbyzerotrap_enabled()) + return(DIVISIONBYZEROEXCEPTION); + Set_divisionbyzeroflag(); + Sgl_setinfinity_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * Generate exponent + */ + dest_exponent = Sgl_exponent(opnd1) - Sgl_exponent(opnd2) + SGL_BIAS; + + /* + * Generate mantissa + */ + if (Sgl_isnotzero_exponent(opnd1)) { + /* set hidden bit */ + Sgl_clear_signexponent_set_hidden(opnd1); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd1)) { + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Sgl_clear_signexponent(opnd1); + Sgl_leftshiftby1(opnd1); + Sgl_normalize(opnd1,dest_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Sgl_isnotzero_exponent(opnd2)) { + Sgl_clear_signexponent_set_hidden(opnd2); + } + else { + /* is denormalized; want to normalize */ + Sgl_clear_signexponent(opnd2); + Sgl_leftshiftby1(opnd2); + while(Sgl_iszero_hiddenhigh7mantissa(opnd2)) { + Sgl_leftshiftby8(opnd2); + dest_exponent += 8; + } + if(Sgl_iszero_hiddenhigh3mantissa(opnd2)) { + Sgl_leftshiftby4(opnd2); + dest_exponent += 4; + } + while(Sgl_iszero_hidden(opnd2)) { + Sgl_leftshiftby1(opnd2); + dest_exponent += 1; + } + } + + /* Divide the source mantissas */ + + /* + * A non_restoring divide algorithm is used. + */ + Sgl_subtract(opnd1,opnd2,opnd1); + Sgl_setzero(opnd3); + for (count=1;count<=SGL_P && Sgl_all(opnd1);count++) { + Sgl_leftshiftby1(opnd1); + Sgl_leftshiftby1(opnd3); + if (Sgl_iszero_sign(opnd1)) { + Sgl_setone_lowmantissa(opnd3); + Sgl_subtract(opnd1,opnd2,opnd1); + } + else Sgl_addition(opnd1,opnd2,opnd1); + } + if (count <= SGL_P) { + Sgl_leftshiftby1(opnd3); + Sgl_setone_lowmantissa(opnd3); + Sgl_leftshift(opnd3,SGL_P-count); + if (Sgl_iszero_hidden(opnd3)) { + Sgl_leftshiftby1(opnd3); + dest_exponent--; + } + } + else { + if (Sgl_iszero_hidden(opnd3)) { + /* need to get one more bit of result */ + Sgl_leftshiftby1(opnd1); + Sgl_leftshiftby1(opnd3); + if (Sgl_iszero_sign(opnd1)) { + Sgl_setone_lowmantissa(opnd3); + Sgl_subtract(opnd1,opnd2,opnd1); + } + else Sgl_addition(opnd1,opnd2,opnd1); + dest_exponent--; + } + if (Sgl_iszero_sign(opnd1)) guardbit = TRUE; + stickybit = Sgl_all(opnd1); + } + inexact = guardbit | stickybit; + + /* + * round result + */ + if (inexact && (dest_exponent > 0 || Is_underflowtrap_enabled())) { + Sgl_clear_signexponent(opnd3); + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) + Sgl_increment_mantissa(opnd3); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) + Sgl_increment_mantissa(opnd3); + break; + case ROUNDNEAREST: + if (guardbit) { + if (stickybit || Sgl_isone_lowmantissa(opnd3)) + Sgl_increment_mantissa(opnd3); + } + } + if (Sgl_isone_hidden(opnd3)) dest_exponent++; + } + Sgl_set_mantissa(result,opnd3); + + /* + * Test for overflow + */ + if (dest_exponent >= SGL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,ovfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + Set_overflowflag(); + /* set result to infinity or largest number */ + Sgl_setoverflow(result); + inexact = TRUE; + } + /* + * Test for underflow + */ + else if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,unfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(UNDERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(UNDERFLOWEXCEPTION); + } + + /* Determine if should set underflow flag */ + is_tiny = TRUE; + if (dest_exponent == 0 && inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Sgl_isone_lowmantissa(opnd3))) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + } + } + + /* + * denormalize result or set to signed zero + */ + stickybit = inexact; + Sgl_denormalize(opnd3,dest_exponent,guardbit,stickybit,inexact); + + /* return rounded number */ + if (inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) { + Sgl_increment(opnd3); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) { + Sgl_increment(opnd3); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Sgl_isone_lowmantissa(opnd3))) { + Sgl_increment(opnd3); + } + break; + } + if (is_tiny) Set_underflowflag(); + } + Sgl_set_exponentmantissa(result,opnd3); + } + else Sgl_set_exponent(result,dest_exponent); + *dstptr = result; + /* check for inexact */ + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/sfmpy.c b/arch/parisc/math-emu/sfmpy.c new file mode 100644 index 000000000000..afa406983335 --- /dev/null +++ b/arch/parisc/math-emu/sfmpy.c @@ -0,0 +1,380 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfmpy.c $Revision: 1.1 $ + * + * Purpose: + * Single Precision Floating-point Multiply + * + * External Interfaces: + * sgl_fmpy(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single Precision Floating-point Multiply + */ + +int +sgl_fmpy( + sgl_floating_point *srcptr1, + sgl_floating_point *srcptr2, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int opnd1, opnd2, opnd3, result; + register int dest_exponent, count; + register boolean inexact = FALSE, guardbit = FALSE, stickybit = FALSE; + boolean is_tiny; + + opnd1 = *srcptr1; + opnd2 = *srcptr2; + /* + * set sign bit of result + */ + if (Sgl_sign(opnd1) ^ Sgl_sign(opnd2)) Sgl_setnegativezero(result); + else Sgl_setzero(result); + /* + * check first operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd1)) { + if (Sgl_iszero_mantissa(opnd1)) { + if (Sgl_isnotnan(opnd2)) { + if (Sgl_iszero_exponentmantissa(opnd2)) { + /* + * invalid since operands are infinity + * and zero + */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd1); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + *dstptr = opnd1; + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(opnd2)) { + if (Sgl_iszero_mantissa(opnd2)) { + if (Sgl_iszero_exponentmantissa(opnd1)) { + /* invalid since operands are zero & infinity */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(opnd2); + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * return infinity + */ + Sgl_setinfinity_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + } + /* + * return quiet NaN + */ + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * Generate exponent + */ + dest_exponent = Sgl_exponent(opnd1) + Sgl_exponent(opnd2) - SGL_BIAS; + + /* + * Generate mantissa + */ + if (Sgl_isnotzero_exponent(opnd1)) { + /* set hidden bit */ + Sgl_clear_signexponent_set_hidden(opnd1); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd1)) { + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* is denormalized, adjust exponent */ + Sgl_clear_signexponent(opnd1); + Sgl_leftshiftby1(opnd1); + Sgl_normalize(opnd1,dest_exponent); + } + /* opnd2 needs to have hidden bit set with msb in hidden bit */ + if (Sgl_isnotzero_exponent(opnd2)) { + Sgl_clear_signexponent_set_hidden(opnd2); + } + else { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd2)) { + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* is denormalized; want to normalize */ + Sgl_clear_signexponent(opnd2); + Sgl_leftshiftby1(opnd2); + Sgl_normalize(opnd2,dest_exponent); + } + + /* Multiply two source mantissas together */ + + Sgl_leftshiftby4(opnd2); /* make room for guard bits */ + Sgl_setzero(opnd3); + /* + * Four bits at a time are inspected in each loop, and a + * simple shift and add multiply algorithm is used. + */ + for (count=1;count= 2. */ + dest_exponent++; + } + /* check for denormalized result */ + while (Sgl_iszero_sign(opnd3)) { + Sgl_leftshiftby1(opnd3); + dest_exponent--; + } + /* + * check for guard, sticky and inexact bits + */ + stickybit |= Sgl_all(opnd3) << (SGL_BITLENGTH - SGL_EXP_LENGTH + 1); + guardbit = Sbit24(opnd3); + inexact = guardbit | stickybit; + + /* re-align mantissa */ + Sgl_rightshiftby8(opnd3); + + /* + * round result + */ + if (inexact && (dest_exponent>0 || Is_underflowtrap_enabled())) { + Sgl_clear_signexponent(opnd3); + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) + Sgl_increment(opnd3); + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) + Sgl_increment(opnd3); + break; + case ROUNDNEAREST: + if (guardbit) { + if (stickybit || Sgl_isone_lowmantissa(opnd3)) + Sgl_increment(opnd3); + } + } + if (Sgl_isone_hidden(opnd3)) dest_exponent++; + } + Sgl_set_mantissa(result,opnd3); + + /* + * Test for overflow + */ + if (dest_exponent >= SGL_INFINITY_EXPONENT) { + /* trap if OVERFLOWTRAP enabled */ + if (Is_overflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,ovfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + inexact = TRUE; + Set_overflowflag(); + /* set result to infinity or largest number */ + Sgl_setoverflow(result); + } + /* + * Test for underflow + */ + else if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,unfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(UNDERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(UNDERFLOWEXCEPTION); + } + + /* Determine if should set underflow flag */ + is_tiny = TRUE; + if (dest_exponent == 0 && inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Sgl_isone_lowmantissa(opnd3))) { + Sgl_increment(opnd3); + if (Sgl_isone_hiddenoverflow(opnd3)) + is_tiny = FALSE; + Sgl_decrement(opnd3); + } + break; + } + } + + /* + * denormalize result or set to signed zero + */ + stickybit = inexact; + Sgl_denormalize(opnd3,dest_exponent,guardbit,stickybit,inexact); + + /* return zero or smallest number */ + if (inexact) { + switch (Rounding_mode()) { + case ROUNDPLUS: + if (Sgl_iszero_sign(result)) { + Sgl_increment(opnd3); + } + break; + case ROUNDMINUS: + if (Sgl_isone_sign(result)) { + Sgl_increment(opnd3); + } + break; + case ROUNDNEAREST: + if (guardbit && (stickybit || + Sgl_isone_lowmantissa(opnd3))) { + Sgl_increment(opnd3); + } + break; + } + if (is_tiny) Set_underflowflag(); + } + Sgl_set_exponentmantissa(result,opnd3); + } + else Sgl_set_exponent(result,dest_exponent); + *dstptr = result; + + /* check for inexact */ + if (inexact) { + if (Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + } + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/sfrem.c b/arch/parisc/math-emu/sfrem.c new file mode 100644 index 000000000000..3a1b7a34d87a --- /dev/null +++ b/arch/parisc/math-emu/sfrem.c @@ -0,0 +1,290 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfrem.c $Revision: 1.1 $ + * + * Purpose: + * Single Precision Floating-point Remainder + * + * External Interfaces: + * sgl_frem(srcptr1,srcptr2,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single Precision Floating-point Remainder + */ + +int +sgl_frem (sgl_floating_point * srcptr1, sgl_floating_point * srcptr2, + sgl_floating_point * dstptr, unsigned int *status) +{ + register unsigned int opnd1, opnd2, result; + register int opnd1_exponent, opnd2_exponent, dest_exponent, stepcount; + register boolean roundup = FALSE; + + opnd1 = *srcptr1; + opnd2 = *srcptr2; + /* + * check first operand for NaN's or infinity + */ + if ((opnd1_exponent = Sgl_exponent(opnd1)) == SGL_INFINITY_EXPONENT) { + if (Sgl_iszero_mantissa(opnd1)) { + if (Sgl_isnotnan(opnd2)) { + /* invalid since first operand is infinity */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + } + else { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd1)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd1); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) + return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + *dstptr = opnd1; + return(NOEXCEPTION); + } + } + /* + * check second operand for NaN's or infinity + */ + if ((opnd2_exponent = Sgl_exponent(opnd2)) == SGL_INFINITY_EXPONENT) { + if (Sgl_iszero_mantissa(opnd2)) { + /* + * return first operand + */ + *dstptr = opnd1; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(opnd2)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(opnd2); + } + /* + * return quiet NaN + */ + *dstptr = opnd2; + return(NOEXCEPTION); + } + /* + * check second operand for zero + */ + if (Sgl_iszero_exponentmantissa(opnd2)) { + /* invalid since second operand is zero */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + + /* + * get sign of result + */ + result = opnd1; + + /* + * check for denormalized operands + */ + if (opnd1_exponent == 0) { + /* check for zero */ + if (Sgl_iszero_mantissa(opnd1)) { + *dstptr = opnd1; + return(NOEXCEPTION); + } + /* normalize, then continue */ + opnd1_exponent = 1; + Sgl_normalize(opnd1,opnd1_exponent); + } + else { + Sgl_clear_signexponent_set_hidden(opnd1); + } + if (opnd2_exponent == 0) { + /* normalize, then continue */ + opnd2_exponent = 1; + Sgl_normalize(opnd2,opnd2_exponent); + } + else { + Sgl_clear_signexponent_set_hidden(opnd2); + } + + /* find result exponent and divide step loop count */ + dest_exponent = opnd2_exponent - 1; + stepcount = opnd1_exponent - opnd2_exponent; + + /* + * check for opnd1/opnd2 < 1 + */ + if (stepcount < 0) { + /* + * check for opnd1/opnd2 > 1/2 + * + * In this case n will round to 1, so + * r = opnd1 - opnd2 + */ + if (stepcount == -1 && Sgl_isgreaterthan(opnd1,opnd2)) { + Sgl_all(result) = ~Sgl_all(result); /* set sign */ + /* align opnd2 with opnd1 */ + Sgl_leftshiftby1(opnd2); + Sgl_subtract(opnd2,opnd1,opnd2); + /* now normalize */ + while (Sgl_iszero_hidden(opnd2)) { + Sgl_leftshiftby1(opnd2); + dest_exponent--; + } + Sgl_set_exponentmantissa(result,opnd2); + goto testforunderflow; + } + /* + * opnd1/opnd2 <= 1/2 + * + * In this case n will round to zero, so + * r = opnd1 + */ + Sgl_set_exponentmantissa(result,opnd1); + dest_exponent = opnd1_exponent; + goto testforunderflow; + } + + /* + * Generate result + * + * Do iterative subtract until remainder is less than operand 2. + */ + while (stepcount-- > 0 && Sgl_all(opnd1)) { + if (Sgl_isnotlessthan(opnd1,opnd2)) + Sgl_subtract(opnd1,opnd2,opnd1); + Sgl_leftshiftby1(opnd1); + } + /* + * Do last subtract, then determine which way to round if remainder + * is exactly 1/2 of opnd2 + */ + if (Sgl_isnotlessthan(opnd1,opnd2)) { + Sgl_subtract(opnd1,opnd2,opnd1); + roundup = TRUE; + } + if (stepcount > 0 || Sgl_iszero(opnd1)) { + /* division is exact, remainder is zero */ + Sgl_setzero_exponentmantissa(result); + *dstptr = result; + return(NOEXCEPTION); + } + + /* + * Check for cases where opnd1/opnd2 < n + * + * In this case the result's sign will be opposite that of + * opnd1. The mantissa also needs some correction. + */ + Sgl_leftshiftby1(opnd1); + if (Sgl_isgreaterthan(opnd1,opnd2)) { + Sgl_invert_sign(result); + Sgl_subtract((opnd2<<1),opnd1,opnd1); + } + /* check for remainder being exactly 1/2 of opnd2 */ + else if (Sgl_isequal(opnd1,opnd2) && roundup) { + Sgl_invert_sign(result); + } + + /* normalize result's mantissa */ + while (Sgl_iszero_hidden(opnd1)) { + dest_exponent--; + Sgl_leftshiftby1(opnd1); + } + Sgl_set_exponentmantissa(result,opnd1); + + /* + * Test for underflow + */ + testforunderflow: + if (dest_exponent <= 0) { + /* trap if UNDERFLOWTRAP enabled */ + if (Is_underflowtrap_enabled()) { + /* + * Adjust bias of result + */ + Sgl_setwrapped_exponent(result,dest_exponent,unfl); + *dstptr = result; + /* frem is always exact */ + return(UNDERFLOWEXCEPTION); + } + /* + * denormalize result or set to signed zero + */ + if (dest_exponent >= (1 - SGL_P)) { + Sgl_rightshift_exponentmantissa(result,1-dest_exponent); + } + else { + Sgl_setzero_exponentmantissa(result); + } + } + else Sgl_set_exponent(result,dest_exponent); + *dstptr = result; + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/sfsqrt.c b/arch/parisc/math-emu/sfsqrt.c new file mode 100644 index 000000000000..cd3f6db1f6fb --- /dev/null +++ b/arch/parisc/math-emu/sfsqrt.c @@ -0,0 +1,187 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfsqrt.c $Revision: 1.1 $ + * + * Purpose: + * Single Floating-point Square Root + * + * External Interfaces: + * sgl_fsqrt(srcptr,nullptr,dstptr,status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single Floating-point Square Root + */ + +/*ARGSUSED*/ +unsigned int +sgl_fsqrt( + sgl_floating_point *srcptr, + unsigned int *nullptr, + sgl_floating_point *dstptr, + unsigned int *status) +{ + register unsigned int src, result; + register int src_exponent; + register unsigned int newbit, sum; + register boolean guardbit = FALSE, even_exponent; + + src = *srcptr; + /* + * check source operand for NaN or infinity + */ + if ((src_exponent = Sgl_exponent(src)) == SGL_INFINITY_EXPONENT) { + /* + * is signaling NaN? + */ + if (Sgl_isone_signaling(src)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(src); + } + /* + * Return quiet NaN or positive infinity. + * Fall thru to negative test if negative infinity. + */ + if (Sgl_iszero_sign(src) || Sgl_isnotzero_mantissa(src)) { + *dstptr = src; + return(NOEXCEPTION); + } + } + + /* + * check for zero source operand + */ + if (Sgl_iszero_exponentmantissa(src)) { + *dstptr = src; + return(NOEXCEPTION); + } + + /* + * check for negative source operand + */ + if (Sgl_isone_sign(src)) { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_makequietnan(src); + *dstptr = src; + return(NOEXCEPTION); + } + + /* + * Generate result + */ + if (src_exponent > 0) { + even_exponent = Sgl_hidden(src); + Sgl_clear_signexponent_set_hidden(src); + } + else { + /* normalize operand */ + Sgl_clear_signexponent(src); + src_exponent++; + Sgl_normalize(src,src_exponent); + even_exponent = src_exponent & 1; + } + if (even_exponent) { + /* exponent is even */ + /* Add comment here. Explain why odd exponent needs correction */ + Sgl_leftshiftby1(src); + } + /* + * Add comment here. Explain following algorithm. + * + * Trust me, it works. + * + */ + Sgl_setzero(result); + newbit = 1 << SGL_P; + while (newbit && Sgl_isnotzero(src)) { + Sgl_addition(result,newbit,sum); + if(sum <= Sgl_all(src)) { + /* update result */ + Sgl_addition(result,(newbit<<1),result); + Sgl_subtract(src,sum,src); + } + Sgl_rightshiftby1(newbit); + Sgl_leftshiftby1(src); + } + /* correct exponent for pre-shift */ + if (even_exponent) { + Sgl_rightshiftby1(result); + } + + /* check for inexact */ + if (Sgl_isnotzero(src)) { + if (!even_exponent && Sgl_islessthan(result,src)) + Sgl_increment(result); + guardbit = Sgl_lowmantissa(result); + Sgl_rightshiftby1(result); + + /* now round result */ + switch (Rounding_mode()) { + case ROUNDPLUS: + Sgl_increment(result); + break; + case ROUNDNEAREST: + /* stickybit is always true, so guardbit + * is enough to determine rounding */ + if (guardbit) { + Sgl_increment(result); + } + break; + } + /* increment result exponent by 1 if mantissa overflowed */ + if (Sgl_isone_hiddenoverflow(result)) src_exponent+=2; + + if (Is_inexacttrap_enabled()) { + Sgl_set_exponent(result, + ((src_exponent-SGL_BIAS)>>1)+SGL_BIAS); + *dstptr = result; + return(INEXACTEXCEPTION); + } + else Set_inexactflag(); + } + else { + Sgl_rightshiftby1(result); + } + Sgl_set_exponent(result,((src_exponent-SGL_BIAS)>>1)+SGL_BIAS); + *dstptr = result; + return(NOEXCEPTION); +} diff --git a/arch/parisc/math-emu/sfsub.c b/arch/parisc/math-emu/sfsub.c new file mode 100644 index 000000000000..24eef61c8e3b --- /dev/null +++ b/arch/parisc/math-emu/sfsub.c @@ -0,0 +1,521 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* + * BEGIN_DESC + * + * File: + * @(#) pa/spmath/sfsub.c $Revision: 1.1 $ + * + * Purpose: + * Single_subtract: subtract two single precision values. + * + * External Interfaces: + * sgl_fsub(leftptr, rightptr, dstptr, status) + * + * Internal Interfaces: + * + * Theory: + * <> + * + * END_DESC +*/ + + +#include "float.h" +#include "sgl_float.h" + +/* + * Single_subtract: subtract two single precision values. + */ +int +sgl_fsub( + sgl_floating_point *leftptr, + sgl_floating_point *rightptr, + sgl_floating_point *dstptr, + unsigned int *status) + { + register unsigned int left, right, result, extent; + register unsigned int signless_upper_left, signless_upper_right, save; + + register int result_exponent, right_exponent, diff_exponent; + register int sign_save, jumpsize; + register boolean inexact = FALSE, underflowtrap; + + /* Create local copies of the numbers */ + left = *leftptr; + right = *rightptr; + + /* A zero "save" helps discover equal operands (for later), * + * and is used in swapping operands (if needed). */ + Sgl_xortointp1(left,right,/*to*/save); + + /* + * check first operand for NaN's or infinity + */ + if ((result_exponent = Sgl_exponent(left)) == SGL_INFINITY_EXPONENT) + { + if (Sgl_iszero_mantissa(left)) + { + if (Sgl_isnotnan(right)) + { + if (Sgl_isinfinity(right) && save==0) + { + /* + * invalid since operands are same signed infinity's + */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + Set_invalidflag(); + Sgl_makequietnan(result); + *dstptr = result; + return(NOEXCEPTION); + } + /* + * return infinity + */ + *dstptr = left; + return(NOEXCEPTION); + } + } + else + { + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(left)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(left); + } + /* + * is second operand a signaling NaN? + */ + else if (Sgl_is_signalingnan(right)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(right); + *dstptr = right; + return(NOEXCEPTION); + } + /* + * return quiet NaN + */ + *dstptr = left; + return(NOEXCEPTION); + } + } /* End left NaN or Infinity processing */ + /* + * check second operand for NaN's or infinity + */ + if (Sgl_isinfinity_exponent(right)) + { + if (Sgl_iszero_mantissa(right)) + { + /* return infinity */ + Sgl_invert_sign(right); + *dstptr = right; + return(NOEXCEPTION); + } + /* + * is NaN; signaling or quiet? + */ + if (Sgl_isone_signaling(right)) + { + /* trap if INVALIDTRAP enabled */ + if (Is_invalidtrap_enabled()) return(INVALIDEXCEPTION); + /* make NaN quiet */ + Set_invalidflag(); + Sgl_set_quiet(right); + } + /* + * return quiet NaN + */ + *dstptr = right; + return(NOEXCEPTION); + } /* End right NaN or Infinity processing */ + + /* Invariant: Must be dealing with finite numbers */ + + /* Compare operands by removing the sign */ + Sgl_copytoint_exponentmantissa(left,signless_upper_left); + Sgl_copytoint_exponentmantissa(right,signless_upper_right); + + /* sign difference selects sub or add operation. */ + if(Sgl_ismagnitudeless(signless_upper_left,signless_upper_right)) + { + /* Set the left operand to the larger one by XOR swap * + * First finish the first word using "save" */ + Sgl_xorfromintp1(save,right,/*to*/right); + Sgl_xorfromintp1(save,left,/*to*/left); + result_exponent = Sgl_exponent(left); + Sgl_invert_sign(left); + } + /* Invariant: left is not smaller than right. */ + + if((right_exponent = Sgl_exponent(right)) == 0) + { + /* Denormalized operands. First look for zeroes */ + if(Sgl_iszero_mantissa(right)) + { + /* right is zero */ + if(Sgl_iszero_exponentmantissa(left)) + { + /* Both operands are zeros */ + Sgl_invert_sign(right); + if(Is_rounding_mode(ROUNDMINUS)) + { + Sgl_or_signs(left,/*with*/right); + } + else + { + Sgl_and_signs(left,/*with*/right); + } + } + else + { + /* Left is not a zero and must be the result. Trapped + * underflows are signaled if left is denormalized. Result + * is always exact. */ + if( (result_exponent == 0) && Is_underflowtrap_enabled() ) + { + /* need to normalize results mantissa */ + sign_save = Sgl_signextendedsign(left); + Sgl_leftshiftby1(left); + Sgl_normalize(left,result_exponent); + Sgl_set_sign(left,/*using*/sign_save); + Sgl_setwrapped_exponent(left,result_exponent,unfl); + *dstptr = left; + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + } + *dstptr = left; + return(NOEXCEPTION); + } + + /* Neither are zeroes */ + Sgl_clear_sign(right); /* Exponent is already cleared */ + if(result_exponent == 0 ) + { + /* Both operands are denormalized. The result must be exact + * and is simply calculated. A sum could become normalized and a + * difference could cancel to a true zero. */ + if( (/*signed*/int) save >= 0 ) + { + Sgl_subtract(left,/*minus*/right,/*into*/result); + if(Sgl_iszero_mantissa(result)) + { + if(Is_rounding_mode(ROUNDMINUS)) + { + Sgl_setone_sign(result); + } + else + { + Sgl_setzero_sign(result); + } + *dstptr = result; + return(NOEXCEPTION); + } + } + else + { + Sgl_addition(left,right,/*into*/result); + if(Sgl_isone_hidden(result)) + { + *dstptr = result; + return(NOEXCEPTION); + } + } + if(Is_underflowtrap_enabled()) + { + /* need to normalize result */ + sign_save = Sgl_signextendedsign(result); + Sgl_leftshiftby1(result); + Sgl_normalize(result,result_exponent); + Sgl_set_sign(result,/*using*/sign_save); + Sgl_setwrapped_exponent(result,result_exponent,unfl); + *dstptr = result; + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + *dstptr = result; + return(NOEXCEPTION); + } + right_exponent = 1; /* Set exponent to reflect different bias + * with denomalized numbers. */ + } + else + { + Sgl_clear_signexponent_set_hidden(right); + } + Sgl_clear_exponent_set_hidden(left); + diff_exponent = result_exponent - right_exponent; + + /* + * Special case alignment of operands that would force alignment + * beyond the extent of the extension. A further optimization + * could special case this but only reduces the path length for this + * infrequent case. + */ + if(diff_exponent > SGL_THRESHOLD) + { + diff_exponent = SGL_THRESHOLD; + } + + /* Align right operand by shifting to right */ + Sgl_right_align(/*operand*/right,/*shifted by*/diff_exponent, + /*and lower to*/extent); + + /* Treat sum and difference of the operands separately. */ + if( (/*signed*/int) save >= 0 ) + { + /* + * Difference of the two operands. Their can be no overflow. A + * borrow can occur out of the hidden bit and force a post + * normalization phase. + */ + Sgl_subtract_withextension(left,/*minus*/right,/*with*/extent,/*into*/result); + if(Sgl_iszero_hidden(result)) + { + /* Handle normalization */ + /* A straight foward algorithm would now shift the result + * and extension left until the hidden bit becomes one. Not + * all of the extension bits need participate in the shift. + * Only the two most significant bits (round and guard) are + * needed. If only a single shift is needed then the guard + * bit becomes a significant low order bit and the extension + * must participate in the rounding. If more than a single + * shift is needed, then all bits to the right of the guard + * bit are zeros, and the guard bit may or may not be zero. */ + sign_save = Sgl_signextendedsign(result); + Sgl_leftshiftby1_withextent(result,extent,result); + + /* Need to check for a zero result. The sign and exponent + * fields have already been zeroed. The more efficient test + * of the full object can be used. + */ + if(Sgl_iszero(result)) + /* Must have been "x-x" or "x+(-x)". */ + { + if(Is_rounding_mode(ROUNDMINUS)) Sgl_setone_sign(result); + *dstptr = result; + return(NOEXCEPTION); + } + result_exponent--; + /* Look to see if normalization is finished. */ + if(Sgl_isone_hidden(result)) + { + if(result_exponent==0) + { + /* Denormalized, exponent should be zero. Left operand * + * was normalized, so extent (guard, round) was zero */ + goto underflow; + } + else + { + /* No further normalization is needed. */ + Sgl_set_sign(result,/*using*/sign_save); + Ext_leftshiftby1(extent); + goto round; + } + } + + /* Check for denormalized, exponent should be zero. Left * + * operand was normalized, so extent (guard, round) was zero */ + if(!(underflowtrap = Is_underflowtrap_enabled()) && + result_exponent==0) goto underflow; + + /* Shift extension to complete one bit of normalization and + * update exponent. */ + Ext_leftshiftby1(extent); + + /* Discover first one bit to determine shift amount. Use a + * modified binary search. We have already shifted the result + * one position right and still not found a one so the remainder + * of the extension must be zero and simplifies rounding. */ + /* Scan bytes */ + while(Sgl_iszero_hiddenhigh7mantissa(result)) + { + Sgl_leftshiftby8(result); + if((result_exponent -= 8) <= 0 && !underflowtrap) + goto underflow; + } + /* Now narrow it down to the nibble */ + if(Sgl_iszero_hiddenhigh3mantissa(result)) + { + /* The lower nibble contains the normalizing one */ + Sgl_leftshiftby4(result); + if((result_exponent -= 4) <= 0 && !underflowtrap) + goto underflow; + } + /* Select case were first bit is set (already normalized) + * otherwise select the proper shift. */ + if((jumpsize = Sgl_hiddenhigh3mantissa(result)) > 7) + { + /* Already normalized */ + if(result_exponent <= 0) goto underflow; + Sgl_set_sign(result,/*using*/sign_save); + Sgl_set_exponent(result,/*using*/result_exponent); + *dstptr = result; + return(NOEXCEPTION); + } + Sgl_sethigh4bits(result,/*using*/sign_save); + switch(jumpsize) + { + case 1: + { + Sgl_leftshiftby3(result); + result_exponent -= 3; + break; + } + case 2: + case 3: + { + Sgl_leftshiftby2(result); + result_exponent -= 2; + break; + } + case 4: + case 5: + case 6: + case 7: + { + Sgl_leftshiftby1(result); + result_exponent -= 1; + break; + } + } + if(result_exponent > 0) + { + Sgl_set_exponent(result,/*using*/result_exponent); + *dstptr = result; /* Sign bit is already set */ + return(NOEXCEPTION); + } + /* Fixup potential underflows */ + underflow: + if(Is_underflowtrap_enabled()) + { + Sgl_set_sign(result,sign_save); + Sgl_setwrapped_exponent(result,result_exponent,unfl); + *dstptr = result; + /* inexact = FALSE */ + return(UNDERFLOWEXCEPTION); + } + /* + * Since we cannot get an inexact denormalized result, + * we can now return. + */ + Sgl_right_align(result,/*by*/(1-result_exponent),extent); + Sgl_clear_signexponent(result); + Sgl_set_sign(result,sign_save); + *dstptr = result; + return(NOEXCEPTION); + } /* end if(hidden...)... */ + /* Fall through and round */ + } /* end if(save >= 0)... */ + else + { + /* Add magnitudes */ + Sgl_addition(left,right,/*to*/result); + if(Sgl_isone_hiddenoverflow(result)) + { + /* Prenormalization required. */ + Sgl_rightshiftby1_withextent(result,extent,extent); + Sgl_arithrightshiftby1(result); + result_exponent++; + } /* end if hiddenoverflow... */ + } /* end else ...sub magnitudes... */ + + /* Round the result. If the extension is all zeros,then the result is + * exact. Otherwise round in the correct direction. No underflow is + * possible. If a postnormalization is necessary, then the mantissa is + * all zeros so no shift is needed. */ + round: + if(Ext_isnotzero(extent)) + { + inexact = TRUE; + switch(Rounding_mode()) + { + case ROUNDNEAREST: /* The default. */ + if(Ext_isone_sign(extent)) + { + /* at least 1/2 ulp */ + if(Ext_isnotzero_lower(extent) || + Sgl_isone_lowmantissa(result)) + { + /* either exactly half way and odd or more than 1/2ulp */ + Sgl_increment(result); + } + } + break; + + case ROUNDPLUS: + if(Sgl_iszero_sign(result)) + { + /* Round up positive results */ + Sgl_increment(result); + } + break; + + case ROUNDMINUS: + if(Sgl_isone_sign(result)) + { + /* Round down negative results */ + Sgl_increment(result); + } + + case ROUNDZERO:; + /* truncate is simple */ + } /* end switch... */ + if(Sgl_isone_hiddenoverflow(result)) result_exponent++; + } + if(result_exponent == SGL_INFINITY_EXPONENT) + { + /* Overflow */ + if(Is_overflowtrap_enabled()) + { + Sgl_setwrapped_exponent(result,result_exponent,ovfl); + *dstptr = result; + if (inexact) + if (Is_inexacttrap_enabled()) + return(OVERFLOWEXCEPTION | INEXACTEXCEPTION); + else Set_inexactflag(); + return(OVERFLOWEXCEPTION); + } + else + { + Set_overflowflag(); + inexact = TRUE; + Sgl_setoverflow(result); + } + } + else Sgl_set_exponent(result,result_exponent); + *dstptr = result; + if(inexact) + if(Is_inexacttrap_enabled()) return(INEXACTEXCEPTION); + else Set_inexactflag(); + return(NOEXCEPTION); + } diff --git a/arch/parisc/math-emu/sgl_float.h b/arch/parisc/math-emu/sgl_float.h new file mode 100644 index 000000000000..82519a5c2ba5 --- /dev/null +++ b/arch/parisc/math-emu/sgl_float.h @@ -0,0 +1,486 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * + * Floating-point emulation code + * Copyright (C) 2001 Hewlett-Packard (Paul Bame) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifdef __NO_PA_HDRS + PA header file -- do not include this header file for non-PA builds. +#endif + +/* 32-bit word grabing functions */ +#define Sgl_firstword(value) Sall(value) +#define Sgl_secondword(value) dummy_location +#define Sgl_thirdword(value) dummy_location +#define Sgl_fourthword(value) dummy_location + +#define Sgl_sign(object) Ssign(object) +#define Sgl_exponent(object) Sexponent(object) +#define Sgl_signexponent(object) Ssignexponent(object) +#define Sgl_mantissa(object) Smantissa(object) +#define Sgl_exponentmantissa(object) Sexponentmantissa(object) +#define Sgl_all(object) Sall(object) + +/* sgl_and_signs ands the sign bits of each argument and puts the result + * into the first argument. sgl_or_signs ors those same sign bits */ +#define Sgl_and_signs( src1dst, src2) \ + Sall(src1dst) = (Sall(src2)|~((unsigned int)1<<31)) & Sall(src1dst) +#define Sgl_or_signs( src1dst, src2) \ + Sall(src1dst) = (Sall(src2)&((unsigned int)1<<31)) | Sall(src1dst) + +/* The hidden bit is always the low bit of the exponent */ +#define Sgl_clear_exponent_set_hidden(srcdst) Deposit_sexponent(srcdst,1) +#define Sgl_clear_signexponent_set_hidden(srcdst) \ + Deposit_ssignexponent(srcdst,1) +#define Sgl_clear_sign(srcdst) Sall(srcdst) &= ~((unsigned int)1<<31) +#define Sgl_clear_signexponent(srcdst) Sall(srcdst) &= 0x007fffff + +/* varamount must be less than 32 for the next three functions */ +#define Sgl_rightshift(srcdst, varamount) \ + Sall(srcdst) >>= varamount +#define Sgl_leftshift(srcdst, varamount) \ + Sall(srcdst) <<= varamount +#define Sgl_rightshift_exponentmantissa(srcdst, varamount) \ + Sall(srcdst) = \ + (Sexponentmantissa(srcdst) >> varamount) | \ + (Sall(srcdst) & ((unsigned int)1<<31)) + +#define Sgl_leftshiftby1_withextent(left,right,result) \ + Shiftdouble(Sall(left),Extall(right),31,Sall(result)) + +#define Sgl_rightshiftby1_withextent(left,right,dst) \ + Shiftdouble(Sall(left),Extall(right),1,Extall(right)) +#define Sgl_arithrightshiftby1(srcdst) \ + Sall(srcdst) = (int)Sall(srcdst) >> 1 + +/* Sign extend the sign bit with an integer destination */ +#define Sgl_signextendedsign(value) Ssignedsign(value) + +#define Sgl_isone_hidden(sgl_value) (Shidden(sgl_value)) +#define Sgl_increment(sgl_value) Sall(sgl_value) += 1 +#define Sgl_increment_mantissa(sgl_value) \ + Deposit_smantissa(sgl_value,sgl_value+1) +#define Sgl_decrement(sgl_value) Sall(sgl_value) -= 1 + +#define Sgl_isone_sign(sgl_value) (Is_ssign(sgl_value)!=0) +#define Sgl_isone_hiddenoverflow(sgl_value) \ + (Is_shiddenoverflow(sgl_value)!=0) +#define Sgl_isone_lowmantissa(sgl_value) (Is_slow(sgl_value)!=0) +#define Sgl_isone_signaling(sgl_value) (Is_ssignaling(sgl_value)!=0) +#define Sgl_is_signalingnan(sgl_value) (Ssignalingnan(sgl_value)==0x1ff) +#define Sgl_isnotzero(sgl_value) (Sall(sgl_value)!=0) +#define Sgl_isnotzero_hiddenhigh7mantissa(sgl_value) \ + (Shiddenhigh7mantissa(sgl_value)!=0) +#define Sgl_isnotzero_low4(sgl_value) (Slow4(sgl_value)!=0) +#define Sgl_isnotzero_exponent(sgl_value) (Sexponent(sgl_value)!=0) +#define Sgl_isnotzero_mantissa(sgl_value) (Smantissa(sgl_value)!=0) +#define Sgl_isnotzero_exponentmantissa(sgl_value) \ + (Sexponentmantissa(sgl_value)!=0) +#define Sgl_iszero(sgl_value) (Sall(sgl_value)==0) +#define Sgl_iszero_signaling(sgl_value) (Is_ssignaling(sgl_value)==0) +#define Sgl_iszero_hidden(sgl_value) (Is_shidden(sgl_value)==0) +#define Sgl_iszero_hiddenoverflow(sgl_value) \ + (Is_shiddenoverflow(sgl_value)==0) +#define Sgl_iszero_hiddenhigh3mantissa(sgl_value) \ + (Shiddenhigh3mantissa(sgl_value)==0) +#define Sgl_iszero_hiddenhigh7mantissa(sgl_value) \ + (Shiddenhigh7mantissa(sgl_value)==0) +#define Sgl_iszero_sign(sgl_value) (Is_ssign(sgl_value)==0) +#define Sgl_iszero_exponent(sgl_value) (Sexponent(sgl_value)==0) +#define Sgl_iszero_mantissa(sgl_value) (Smantissa(sgl_value)==0) +#define Sgl_iszero_exponentmantissa(sgl_value) \ + (Sexponentmantissa(sgl_value)==0) +#define Sgl_isinfinity_exponent(sgl_value) \ + (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT) +#define Sgl_isnotinfinity_exponent(sgl_value) \ + (Sgl_exponent(sgl_value)!=SGL_INFINITY_EXPONENT) +#define Sgl_isinfinity(sgl_value) \ + (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT && \ + Sgl_mantissa(sgl_value)==0) +#define Sgl_isnan(sgl_value) \ + (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT && \ + Sgl_mantissa(sgl_value)!=0) +#define Sgl_isnotnan(sgl_value) \ + (Sgl_exponent(sgl_value)!=SGL_INFINITY_EXPONENT || \ + Sgl_mantissa(sgl_value)==0) +#define Sgl_islessthan(sgl_op1,sgl_op2) \ + (Sall(sgl_op1) < Sall(sgl_op2)) +#define Sgl_isgreaterthan(sgl_op1,sgl_op2) \ + (Sall(sgl_op1) > Sall(sgl_op2)) +#define Sgl_isnotlessthan(sgl_op1,sgl_op2) \ + (Sall(sgl_op1) >= Sall(sgl_op2)) +#define Sgl_isequal(sgl_op1,sgl_op2) \ + (Sall(sgl_op1) == Sall(sgl_op2)) + +#define Sgl_leftshiftby8(sgl_value) \ + Sall(sgl_value) <<= 8 +#define Sgl_leftshiftby4(sgl_value) \ + Sall(sgl_value) <<= 4 +#define Sgl_leftshiftby3(sgl_value) \ + Sall(sgl_value) <<= 3 +#define Sgl_leftshiftby2(sgl_value) \ + Sall(sgl_value) <<= 2 +#define Sgl_leftshiftby1(sgl_value) \ + Sall(sgl_value) <<= 1 +#define Sgl_rightshiftby1(sgl_value) \ + Sall(sgl_value) >>= 1 +#define Sgl_rightshiftby4(sgl_value) \ + Sall(sgl_value) >>= 4 +#define Sgl_rightshiftby8(sgl_value) \ + Sall(sgl_value) >>= 8 + +#define Sgl_ismagnitudeless(signlessleft,signlessright) \ +/* unsigned int signlessleft, signlessright; */ \ + (signlessleft < signlessright) + + +#define Sgl_copytoint_exponentmantissa(source,dest) \ + dest = Sexponentmantissa(source) + +/* A quiet NaN has the high mantissa bit clear and at least on other (in this + * case the adjacent bit) bit set. */ +#define Sgl_set_quiet(sgl_value) Deposit_shigh2mantissa(sgl_value,1) +#define Sgl_set_exponent(sgl_value,exp) Deposit_sexponent(sgl_value,exp) + +#define Sgl_set_mantissa(dest,value) Deposit_smantissa(dest,value) +#define Sgl_set_exponentmantissa(dest,value) \ + Deposit_sexponentmantissa(dest,value) + +/* An infinity is represented with the max exponent and a zero mantissa */ +#define Sgl_setinfinity_exponent(sgl_value) \ + Deposit_sexponent(sgl_value,SGL_INFINITY_EXPONENT) +#define Sgl_setinfinity_exponentmantissa(sgl_value) \ + Deposit_sexponentmantissa(sgl_value, \ + (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH)))) +#define Sgl_setinfinitypositive(sgl_value) \ + Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))) +#define Sgl_setinfinitynegative(sgl_value) \ + Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))) \ + | ((unsigned int)1<<31) +#define Sgl_setinfinity(sgl_value,sign) \ + Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))) | \ + ((unsigned int)sign << 31) +#define Sgl_sethigh4bits(sgl_value, extsign) \ + Deposit_shigh4(sgl_value,extsign) +#define Sgl_set_sign(sgl_value,sign) Deposit_ssign(sgl_value,sign) +#define Sgl_invert_sign(sgl_value) \ + Deposit_ssign(sgl_value,~Ssign(sgl_value)) +#define Sgl_setone_sign(sgl_value) Deposit_ssign(sgl_value,1) +#define Sgl_setone_lowmantissa(sgl_value) Deposit_slow(sgl_value,1) +#define Sgl_setzero_sign(sgl_value) Sall(sgl_value) &= 0x7fffffff +#define Sgl_setzero_exponent(sgl_value) Sall(sgl_value) &= 0x807fffff +#define Sgl_setzero_mantissa(sgl_value) Sall(sgl_value) &= 0xff800000 +#define Sgl_setzero_exponentmantissa(sgl_value) Sall(sgl_value) &= 0x80000000 +#define Sgl_setzero(sgl_value) Sall(sgl_value) = 0 +#define Sgl_setnegativezero(sgl_value) Sall(sgl_value) = (unsigned int)1 << 31 + +/* Use following macro for both overflow & underflow conditions */ +#define ovfl - +#define unfl + +#define Sgl_setwrapped_exponent(sgl_value,exponent,op) \ + Deposit_sexponent(sgl_value,(exponent op SGL_WRAP)) + +#define Sgl_setlargestpositive(sgl_value) \ + Sall(sgl_value) = ((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH))) \ + | ((1<<(32-(1+SGL_EXP_LENGTH))) - 1 ) +#define Sgl_setlargestnegative(sgl_value) \ + Sall(sgl_value) = ((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH))) \ + | ((1<<(32-(1+SGL_EXP_LENGTH))) - 1 ) \ + | ((unsigned int)1<<31) + +#define Sgl_setnegativeinfinity(sgl_value) \ + Sall(sgl_value) = \ + ((1<>= shift; \ + } \ + else { \ + Extall(extent) = Sall(srcdst); \ + Sall(srcdst) = 0; \ + } +#define Sgl_hiddenhigh3mantissa(sgl_value) Shiddenhigh3mantissa(sgl_value) +#define Sgl_hidden(sgl_value) Shidden(sgl_value) +#define Sgl_lowmantissa(sgl_value) Slow(sgl_value) + +/* The left argument is never smaller than the right argument */ +#define Sgl_subtract(sgl_left,sgl_right,sgl_result) \ + Sall(sgl_result) = Sall(sgl_left) - Sall(sgl_right) + +/* Subtract right augmented with extension from left augmented with zeros and + * store into result and extension. */ +#define Sgl_subtract_withextension(left,right,extent,result) \ + /* sgl_floating_point left,right,result; extension extent */ \ + Sgl_subtract(left,right,result); \ + if((Extall(extent) = 0-Extall(extent))) \ + Sall(result) = Sall(result)-1 + +#define Sgl_addition(sgl_left,sgl_right,sgl_result) \ + Sall(sgl_result) = Sall(sgl_left) + Sall(sgl_right) + +#define Sgl_xortointp1(left,right,result) \ + result = Sall(left) XOR Sall(right); + +#define Sgl_xorfromintp1(left,right,result) \ + Sall(result) = left XOR Sall(right) + +/* Need to Initialize */ +#define Sgl_makequietnan(dest) \ + Sall(dest) = ((SGL_EMAX+SGL_BIAS)+1)<< (32-(1+SGL_EXP_LENGTH)) \ + | (1<<(32-(1+SGL_EXP_LENGTH+2))) +#define Sgl_makesignalingnan(dest) \ + Sall(dest) = ((SGL_EMAX+SGL_BIAS)+1)<< (32-(1+SGL_EXP_LENGTH)) \ + | (1<<(32-(1+SGL_EXP_LENGTH+1))) + +#define Sgl_normalize(sgl_opnd,exponent) \ + while(Sgl_iszero_hiddenhigh7mantissa(sgl_opnd)) { \ + Sgl_leftshiftby8(sgl_opnd); \ + exponent -= 8; \ + } \ + if(Sgl_iszero_hiddenhigh3mantissa(sgl_opnd)) { \ + Sgl_leftshiftby4(sgl_opnd); \ + exponent -= 4; \ + } \ + while(Sgl_iszero_hidden(sgl_opnd)) { \ + Sgl_leftshiftby1(sgl_opnd); \ + exponent -= 1; \ + } + +#define Sgl_setoverflow(sgl_opnd) \ + /* set result to infinity or largest number */ \ + switch (Rounding_mode()) { \ + case ROUNDPLUS: \ + if (Sgl_isone_sign(sgl_opnd)) { \ + Sgl_setlargestnegative(sgl_opnd); \ + } \ + else { \ + Sgl_setinfinitypositive(sgl_opnd); \ + } \ + break; \ + case ROUNDMINUS: \ + if (Sgl_iszero_sign(sgl_opnd)) { \ + Sgl_setlargestpositive(sgl_opnd); \ + } \ + else { \ + Sgl_setinfinitynegative(sgl_opnd); \ + } \ + break; \ + case ROUNDNEAREST: \ + Sgl_setinfinity_exponentmantissa(sgl_opnd); \ + break; \ + case ROUNDZERO: \ + Sgl_setlargest_exponentmantissa(sgl_opnd); \ + } + +#define Sgl_denormalize(opnd,exponent,guard,sticky,inexact) \ + Sgl_clear_signexponent_set_hidden(opnd); \ + if (exponent >= (1 - SGL_P)) { \ + guard = (Sall(opnd) >> -exponent) & 1; \ + if (exponent < 0) sticky |= Sall(opnd) << (32+exponent); \ + inexact = guard | sticky; \ + Sall(opnd) >>= (1-exponent); \ + } \ + else { \ + guard = 0; \ + sticky |= Sall(opnd); \ + inexact = sticky; \ + Sgl_setzero(opnd); \ + } + +/* + * The fused multiply add instructions requires a single extended format, + * with 48 bits of mantissa. + */ +#define SGLEXT_THRESHOLD 48 + +#define Sglext_setzero(valA,valB) \ + Sextallp1(valA) = 0; Sextallp2(valB) = 0 + +#define Sglext_isnotzero_mantissap2(valB) (Sextallp2(valB)!=0) +#define Sglext_isone_lowp1(val) (Sextlowp1(val)!=0) +#define Sglext_isone_highp2(val) (Sexthighp2(val)!=0) +#define Sglext_isnotzero_low31p2(val) (Sextlow31p2(val)!=0) +#define Sglext_iszero(valA,valB) (Sextallp1(valA)==0 && Sextallp2(valB)==0) + +#define Sgl_copytoptr(src,destptr) *destptr = src +#define Sgl_copyfromptr(srcptr,dest) dest = *srcptr +#define Sglext_copy(srca,srcb,desta,destb) \ + Sextallp1(desta) = Sextallp1(srca); \ + Sextallp2(destb) = Sextallp2(srcb) +#define Sgl_copyto_sglext(src1,dest1,dest2) \ + Sextallp1(dest1) = Sall(src1); Sextallp2(dest2) = 0 + +#define Sglext_swap_lower(leftp2,rightp2) \ + Sextallp2(leftp2) = Sextallp2(leftp2) XOR Sextallp2(rightp2); \ + Sextallp2(rightp2) = Sextallp2(leftp2) XOR Sextallp2(rightp2); \ + Sextallp2(leftp2) = Sextallp2(leftp2) XOR Sextallp2(rightp2) + +#define Sglext_setone_lowmantissap2(value) Deposit_dlowp2(value,1) + +/* The high bit is always zero so arithmetic or logical shifts will work. */ +#define Sglext_right_align(srcdstA,srcdstB,shift) \ + {int shiftamt, sticky; \ + shiftamt = shift % 32; \ + sticky = 0; \ + switch (shift/32) { \ + case 0: if (shiftamt > 0) { \ + sticky = Sextallp2(srcdstB) << 32 - (shiftamt); \ + Variable_shift_double(Sextallp1(srcdstA), \ + Sextallp2(srcdstB),shiftamt,Sextallp2(srcdstB)); \ + Sextallp1(srcdstA) >>= shiftamt; \ + } \ + break; \ + case 1: if (shiftamt > 0) { \ + sticky = (Sextallp1(srcdstA) << 32 - (shiftamt)) | \ + Sextallp2(srcdstB); \ + } \ + else { \ + sticky = Sextallp2(srcdstB); \ + } \ + Sextallp2(srcdstB) = Sextallp1(srcdstA) >> shiftamt; \ + Sextallp1(srcdstA) = 0; \ + break; \ + } \ + if (sticky) Sglext_setone_lowmantissap2(srcdstB); \ + } + +/* The left argument is never smaller than the right argument */ +#define Sglext_subtract(lefta,leftb,righta,rightb,resulta,resultb) \ + if( Sextallp2(rightb) > Sextallp2(leftb) ) Sextallp1(lefta)--; \ + Sextallp2(resultb) = Sextallp2(leftb) - Sextallp2(rightb); \ + Sextallp1(resulta) = Sextallp1(lefta) - Sextallp1(righta) + +#define Sglext_addition(lefta,leftb,righta,rightb,resulta,resultb) \ + /* If the sum of the low words is less than either source, then \ + * an overflow into the next word occurred. */ \ + if ((Sextallp2(resultb) = Sextallp2(leftb)+Sextallp2(rightb)) < \ + Sextallp2(rightb)) \ + Sextallp1(resulta) = Sextallp1(lefta)+Sextallp1(righta)+1; \ + else Sextallp1(resulta) = Sextallp1(lefta)+Sextallp1(righta) + + +#define Sglext_arithrightshiftby1(srcdstA,srcdstB) \ + Shiftdouble(Sextallp1(srcdstA),Sextallp2(srcdstB),1,Sextallp2(srcdstB)); \ + Sextallp1(srcdstA) = (int)Sextallp1(srcdstA) >> 1 + +#define Sglext_leftshiftby8(valA,valB) \ + Shiftdouble(Sextallp1(valA),Sextallp2(valB),24,Sextallp1(valA)); \ + Sextallp2(valB) <<= 8 +#define Sglext_leftshiftby4(valA,valB) \ + Shiftdouble(Sextallp1(valA),Sextallp2(valB),28,Sextallp1(valA)); \ + Sextallp2(valB) <<= 4 +#define Sglext_leftshiftby3(valA,valB) \ + Shiftdouble(Sextallp1(valA),Sextallp2(valB),29,Sextallp1(valA)); \ + Sextallp2(valB) <<= 3 +#define Sglext_leftshiftby2(valA,valB) \ + Shiftdouble(Sextallp1(valA),Sextallp2(valB),30,Sextallp1(valA)); \ + Sextallp2(valB) <<= 2 +#define Sglext_leftshiftby1(valA,valB) \ + Shiftdouble(Sextallp1(valA),Sextallp2(valB),31,Sextallp1(valA)); \ + Sextallp2(valB) <<= 1 + +#define Sglext_rightshiftby4(valueA,valueB) \ + Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),4,Sextallp2(valueB)); \ + Sextallp1(valueA) >>= 4 +#define Sglext_rightshiftby3(valueA,valueB) \ + Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),3,Sextallp2(valueB)); \ + Sextallp1(valueA) >>= 3 +#define Sglext_rightshiftby1(valueA,valueB) \ + Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),1,Sextallp2(valueB)); \ + Sextallp1(valueA) >>= 1 + +#define Sglext_xortointp1(left,right,result) Sgl_xortointp1(left,right,result) +#define Sglext_xorfromintp1(left,right,result) \ + Sgl_xorfromintp1(left,right,result) +#define Sglext_copytoint_exponentmantissa(src,dest) \ + Sgl_copytoint_exponentmantissa(src,dest) +#define Sglext_ismagnitudeless(signlessleft,signlessright) \ + Sgl_ismagnitudeless(signlessleft,signlessright) + +#define Sglext_set_sign(dbl_value,sign) Sgl_set_sign(dbl_value,sign) +#define Sglext_clear_signexponent_set_hidden(srcdst) \ + Sgl_clear_signexponent_set_hidden(srcdst) +#define Sglext_clear_signexponent(srcdst) Sgl_clear_signexponent(srcdst) +#define Sglext_clear_sign(srcdst) Sgl_clear_sign(srcdst) +#define Sglext_isone_hidden(dbl_value) Sgl_isone_hidden(dbl_value) + +#define Sglext_denormalize(opndp1,opndp2,exponent,is_tiny) \ + {int sticky; \ + is_tiny = TRUE; \ + if (exponent == 0 && Sextallp2(opndp2)) { \ + switch (Rounding_mode()) { \ + case ROUNDPLUS: \ + if (Sgl_iszero_sign(opndp1)) \ + if (Sgl_isone_hiddenoverflow(opndp1 + 1)) \ + is_tiny = FALSE; \ + break; \ + case ROUNDMINUS: \ + if (Sgl_isone_sign(opndp1)) { \ + if (Sgl_isone_hiddenoverflow(opndp1 + 1)) \ + is_tiny = FALSE; \ + } \ + break; \ + case ROUNDNEAREST: \ + if (Sglext_isone_highp2(opndp2) && \ + (Sglext_isone_lowp1(opndp1) || \ + Sglext_isnotzero_low31p2(opndp2))) \ + if (Sgl_isone_hiddenoverflow(opndp1 + 1)) \ + is_tiny = FALSE; \ + break; \ + } \ + } \ + Sglext_clear_signexponent_set_hidden(opndp1); \ + if (exponent >= (1-DBL_P)) { \ + if (exponent >= -31) { \ + if (exponent > -31) { \ + sticky = Sextallp2(opndp2) << 31+exponent; \ + Variable_shift_double(opndp1,opndp2,1-exponent,opndp2); \ + Sextallp1(opndp1) >>= 1-exponent; \ + } \ + else { \ + sticky = Sextallp2(opndp2); \ + Sextallp2(opndp2) = Sextallp1(opndp1); \ + Sextallp1(opndp1) = 0; \ + } \ + } \ + else { \ + sticky = (Sextallp1(opndp1) << 31+exponent) | \ + Sextallp2(opndp2); \ + Sextallp2(opndp2) = Sextallp1(opndp1) >> -31-exponent; \ + Sextallp1(opndp1) = 0; \ + } \ + } \ + else { \ + sticky = Sextallp1(opndp1) | Sextallp2(opndp2); \ + Sglext_setzero(opndp1,opndp2); \ + } \ + if (sticky) Sglext_setone_lowmantissap2(opndp2); \ + exponent = 0; \ + } diff --git a/arch/parisc/mm/Makefile b/arch/parisc/mm/Makefile new file mode 100644 index 000000000000..758ceefb373a --- /dev/null +++ b/arch/parisc/mm/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for arch/parisc/mm +# + +obj-y := init.o fault.o ioremap.o diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c new file mode 100644 index 000000000000..eaa701479f5f --- /dev/null +++ b/arch/parisc/mm/fault.c @@ -0,0 +1,271 @@ +/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $ + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * + * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle + * Copyright 1999 SuSE GmbH (Philipp Rumpf, prumpf@tux.org) + * Copyright 1999 Hewlett Packard Co. + * + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define PRINT_USER_FAULTS /* (turn this on if you want user faults to be */ + /* dumped to the console via printk) */ + + +/* Defines for parisc_acctyp() */ +#define READ 0 +#define WRITE 1 + +/* Various important other fields */ +#define bit22set(x) (x & 0x00000200) +#define bits23_25set(x) (x & 0x000001c0) +#define isGraphicsFlushRead(x) ((x & 0xfc003fdf) == 0x04001a80) + /* extended opcode is 0x6a */ + +#define BITSSET 0x1c0 /* for identifying LDCW */ + + +DEFINE_PER_CPU(struct exception_data, exception_data); + +/* + * parisc_acctyp(unsigned int inst) -- + * Given a PA-RISC memory access instruction, determine if the + * the instruction would perform a memory read or memory write + * operation. + * + * This function assumes that the given instruction is a memory access + * instruction (i.e. you should really only call it if you know that + * the instruction has generated some sort of a memory access fault). + * + * Returns: + * VM_READ if read operation + * VM_WRITE if write operation + * VM_EXEC if execute operation + */ +static unsigned long +parisc_acctyp(unsigned long code, unsigned int inst) +{ + if (code == 6 || code == 16) + return VM_EXEC; + + switch (inst & 0xf0000000) { + case 0x40000000: /* load */ + case 0x50000000: /* new load */ + return VM_READ; + + case 0x60000000: /* store */ + case 0x70000000: /* new store */ + return VM_WRITE; + + case 0x20000000: /* coproc */ + case 0x30000000: /* coproc2 */ + if (bit22set(inst)) + return VM_WRITE; + + case 0x0: /* indexed/memory management */ + if (bit22set(inst)) { + /* + * Check for the 'Graphics Flush Read' instruction. + * It resembles an FDC instruction, except for bits + * 20 and 21. Any combination other than zero will + * utilize the block mover functionality on some + * older PA-RISC platforms. The case where a block + * move is performed from VM to graphics IO space + * should be treated as a READ. + * + * The significance of bits 20,21 in the FDC + * instruction is: + * + * 00 Flush data cache (normal instruction behavior) + * 01 Graphics flush write (IO space -> VM) + * 10 Graphics flush read (VM -> IO space) + * 11 Graphics flush read/write (VM <-> IO space) + */ + if (isGraphicsFlushRead(inst)) + return VM_READ; + return VM_WRITE; + } else { + /* + * Check for LDCWX and LDCWS (semaphore instructions). + * If bits 23 through 25 are all 1's it is one of + * the above two instructions and is a write. + * + * Note: With the limited bits we are looking at, + * this will also catch PROBEW and PROBEWI. However, + * these should never get in here because they don't + * generate exceptions of the type: + * Data TLB miss fault/data page fault + * Data memory protection trap + */ + if (bits23_25set(inst) == BITSSET) + return VM_WRITE; + } + return VM_READ; /* Default */ + } + return VM_READ; /* Default */ +} + +#undef bit22set +#undef bits23_25set +#undef isGraphicsFlushRead +#undef BITSSET + + +#if 0 +/* This is the treewalk to find a vma which is the highest that has + * a start < addr. We're using find_vma_prev instead right now, but + * we might want to use this at some point in the future. Probably + * not, but I want it committed to CVS so I don't lose it :-) + */ + while (tree != vm_avl_empty) { + if (tree->vm_start > addr) { + tree = tree->vm_avl_left; + } else { + prev = tree; + if (prev->vm_next == NULL) + break; + if (prev->vm_next->vm_start > addr) + break; + tree = tree->vm_avl_right; + } + } +#endif + +void do_page_fault(struct pt_regs *regs, unsigned long code, + unsigned long address) +{ + struct vm_area_struct *vma, *prev_vma; + struct task_struct *tsk = current; + struct mm_struct *mm = tsk->mm; + const struct exception_table_entry *fix; + unsigned long acc_type; + + if (in_interrupt() || !mm) + goto no_context; + + down_read(&mm->mmap_sem); + vma = find_vma_prev(mm, address, &prev_vma); + if (!vma || address < vma->vm_start) + goto check_expansion; +/* + * Ok, we have a good vm_area for this memory access. We still need to + * check the access permissions. + */ + +good_area: + + acc_type = parisc_acctyp(code,regs->iir); + + if ((vma->vm_flags & acc_type) != acc_type) + goto bad_area; + + /* + * If for any reason at all we couldn't handle the fault, make + * sure we exit gracefully rather than endlessly redo the + * fault. + */ + + switch (handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0)) { + case 1: + ++current->min_flt; + break; + case 2: + ++current->maj_flt; + break; + case 0: + /* + * We ran out of memory, or some other thing happened + * to us that made us unable to handle the page fault + * gracefully. + */ + goto bad_area; + default: + goto out_of_memory; + } + up_read(&mm->mmap_sem); + return; + +check_expansion: + vma = prev_vma; + if (vma && (expand_stack(vma, address) == 0)) + goto good_area; + +/* + * Something tried to access memory that isn't in our memory map.. + */ +bad_area: + up_read(&mm->mmap_sem); + + if (user_mode(regs)) { + struct siginfo si; + +#ifdef PRINT_USER_FAULTS + printk(KERN_DEBUG "\n"); + printk(KERN_DEBUG "do_page_fault() pid=%d command='%s' type=%lu address=0x%08lx\n", + tsk->pid, tsk->comm, code, address); + if (vma) { + printk(KERN_DEBUG "vm_start = 0x%08lx, vm_end = 0x%08lx\n", + vma->vm_start, vma->vm_end); + } + show_regs(regs); +#endif + /* FIXME: actually we need to get the signo and code correct */ + si.si_signo = SIGSEGV; + si.si_errno = 0; + si.si_code = SEGV_MAPERR; + si.si_addr = (void __user *) address; + force_sig_info(SIGSEGV, &si, current); + return; + } + +no_context: + + if (!user_mode(regs)) { + fix = search_exception_tables(regs->iaoq[0]); + + if (fix) { + struct exception_data *d; + + d = &__get_cpu_var(exception_data); + d->fault_ip = regs->iaoq[0]; + d->fault_space = regs->isr; + d->fault_addr = regs->ior; + + regs->iaoq[0] = ((fix->fixup) & ~3); + + /* + * NOTE: In some cases the faulting instruction + * may be in the delay slot of a branch. We + * don't want to take the branch, so we don't + * increment iaoq[1], instead we set it to be + * iaoq[0]+4, and clear the B bit in the PSW + */ + + regs->iaoq[1] = regs->iaoq[0] + 4; + regs->gr[0] &= ~PSW_B; /* IPSW in gr[0] */ + + return; + } + } + + parisc_terminate("Bad Address (null pointer deref?)", regs, code, address); + + out_of_memory: + up_read(&mm->mmap_sem); + printk(KERN_CRIT "VM: killing process %s\n", current->comm); + if (user_mode(regs)) + do_exit(SIGKILL); + goto no_context; +} diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c new file mode 100644 index 000000000000..cac37589e35c --- /dev/null +++ b/arch/parisc/mm/init.c @@ -0,0 +1,1019 @@ +/* + * linux/arch/parisc/mm/init.c + * + * Copyright (C) 1995 Linus Torvalds + * Copyright 1999 SuSE GmbH + * changed by Philipp Rumpf + * Copyright 1999 Philipp Rumpf (prumpf@tux.org) + * Copyright 2004 Randolph Chung (tausq@debian.org) + * + */ + +#include + +#include +#include +#include +#include +#include +#include /* for hppa_dma_ops and pcxl_dma_ops */ +#include +#include +#include +#include /* for node_online_map */ +#include /* for release_pages and page_cache_release */ + +#include +#include +#include +#include + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +extern char _text; /* start of kernel code, defined by linker */ +extern int data_start; +extern char _end; /* end of BSS, defined by linker */ +extern char __init_begin, __init_end; + +#ifdef CONFIG_DISCONTIGMEM +struct node_map_data node_data[MAX_NUMNODES]; +bootmem_data_t bmem_data[MAX_NUMNODES]; +unsigned char pfnnid_map[PFNNID_MAP_MAX]; +#endif + +static struct resource data_resource = { + .name = "Kernel data", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, +}; + +static struct resource code_resource = { + .name = "Kernel code", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, +}; + +static struct resource pdcdata_resource = { + .name = "PDC data (Page Zero)", + .start = 0, + .end = 0x9ff, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, +}; + +static struct resource sysram_resources[MAX_PHYSMEM_RANGES]; + +/* The following array is initialized from the firmware specific + * information retrieved in kernel/inventory.c. + */ + +physmem_range_t pmem_ranges[MAX_PHYSMEM_RANGES]; +int npmem_ranges; + +#ifdef __LP64__ +#define MAX_MEM (~0UL) +#else /* !__LP64__ */ +#define MAX_MEM (3584U*1024U*1024U) +#endif /* !__LP64__ */ + +static unsigned long mem_limit = MAX_MEM; + +static void __init mem_limit_func(void) +{ + char *cp, *end; + unsigned long limit; + extern char saved_command_line[]; + + /* We need this before __setup() functions are called */ + + limit = MAX_MEM; + for (cp = saved_command_line; *cp; ) { + if (memcmp(cp, "mem=", 4) == 0) { + cp += 4; + limit = memparse(cp, &end); + if (end != cp) + break; + cp = end; + } else { + while (*cp != ' ' && *cp) + ++cp; + while (*cp == ' ') + ++cp; + } + } + + if (limit < mem_limit) + mem_limit = limit; +} + +#define MAX_GAP (0x40000000UL >> PAGE_SHIFT) + +static void __init setup_bootmem(void) +{ + unsigned long bootmap_size; + unsigned long mem_max; + unsigned long bootmap_pages; + unsigned long bootmap_start_pfn; + unsigned long bootmap_pfn; +#ifndef CONFIG_DISCONTIGMEM + physmem_range_t pmem_holes[MAX_PHYSMEM_RANGES - 1]; + int npmem_holes; +#endif + int i, sysram_resource_count; + + disable_sr_hashing(); /* Turn off space register hashing */ + + /* + * Sort the ranges. Since the number of ranges is typically + * small, and performance is not an issue here, just do + * a simple insertion sort. + */ + + for (i = 1; i < npmem_ranges; i++) { + int j; + + for (j = i; j > 0; j--) { + unsigned long tmp; + + if (pmem_ranges[j-1].start_pfn < + pmem_ranges[j].start_pfn) { + + break; + } + tmp = pmem_ranges[j-1].start_pfn; + pmem_ranges[j-1].start_pfn = pmem_ranges[j].start_pfn; + pmem_ranges[j].start_pfn = tmp; + tmp = pmem_ranges[j-1].pages; + pmem_ranges[j-1].pages = pmem_ranges[j].pages; + pmem_ranges[j].pages = tmp; + } + } + +#ifndef CONFIG_DISCONTIGMEM + /* + * Throw out ranges that are too far apart (controlled by + * MAX_GAP). + */ + + for (i = 1; i < npmem_ranges; i++) { + if (pmem_ranges[i].start_pfn - + (pmem_ranges[i-1].start_pfn + + pmem_ranges[i-1].pages) > MAX_GAP) { + npmem_ranges = i; + printk("Large gap in memory detected (%ld pages). " + "Consider turning on CONFIG_DISCONTIGMEM\n", + pmem_ranges[i].start_pfn - + (pmem_ranges[i-1].start_pfn + + pmem_ranges[i-1].pages)); + break; + } + } +#endif + + if (npmem_ranges > 1) { + + /* Print the memory ranges */ + + printk(KERN_INFO "Memory Ranges:\n"); + + for (i = 0; i < npmem_ranges; i++) { + unsigned long start; + unsigned long size; + + size = (pmem_ranges[i].pages << PAGE_SHIFT); + start = (pmem_ranges[i].start_pfn << PAGE_SHIFT); + printk(KERN_INFO "%2d) Start 0x%016lx End 0x%016lx Size %6ld MB\n", + i,start, start + (size - 1), size >> 20); + } + } + + sysram_resource_count = npmem_ranges; + for (i = 0; i < sysram_resource_count; i++) { + struct resource *res = &sysram_resources[i]; + res->name = "System RAM"; + res->start = pmem_ranges[i].start_pfn << PAGE_SHIFT; + res->end = res->start + (pmem_ranges[i].pages << PAGE_SHIFT)-1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + request_resource(&iomem_resource, res); + } + + /* + * For 32 bit kernels we limit the amount of memory we can + * support, in order to preserve enough kernel address space + * for other purposes. For 64 bit kernels we don't normally + * limit the memory, but this mechanism can be used to + * artificially limit the amount of memory (and it is written + * to work with multiple memory ranges). + */ + + mem_limit_func(); /* check for "mem=" argument */ + + mem_max = 0; + num_physpages = 0; + for (i = 0; i < npmem_ranges; i++) { + unsigned long rsize; + + rsize = pmem_ranges[i].pages << PAGE_SHIFT; + if ((mem_max + rsize) > mem_limit) { + printk(KERN_WARNING "Memory truncated to %ld MB\n", mem_limit >> 20); + if (mem_max == mem_limit) + npmem_ranges = i; + else { + pmem_ranges[i].pages = (mem_limit >> PAGE_SHIFT) + - (mem_max >> PAGE_SHIFT); + npmem_ranges = i + 1; + mem_max = mem_limit; + } + num_physpages += pmem_ranges[i].pages; + break; + } + num_physpages += pmem_ranges[i].pages; + mem_max += rsize; + } + + printk(KERN_INFO "Total Memory: %ld MB\n",mem_max >> 20); + +#ifndef CONFIG_DISCONTIGMEM + /* Merge the ranges, keeping track of the holes */ + + { + unsigned long end_pfn; + unsigned long hole_pages; + + npmem_holes = 0; + end_pfn = pmem_ranges[0].start_pfn + pmem_ranges[0].pages; + for (i = 1; i < npmem_ranges; i++) { + + hole_pages = pmem_ranges[i].start_pfn - end_pfn; + if (hole_pages) { + pmem_holes[npmem_holes].start_pfn = end_pfn; + pmem_holes[npmem_holes++].pages = hole_pages; + end_pfn += hole_pages; + } + end_pfn += pmem_ranges[i].pages; + } + + pmem_ranges[0].pages = end_pfn - pmem_ranges[0].start_pfn; + npmem_ranges = 1; + } +#endif + + bootmap_pages = 0; + for (i = 0; i < npmem_ranges; i++) + bootmap_pages += bootmem_bootmap_pages(pmem_ranges[i].pages); + + bootmap_start_pfn = PAGE_ALIGN(__pa((unsigned long) &_end)) >> PAGE_SHIFT; + +#ifdef CONFIG_DISCONTIGMEM + for (i = 0; i < MAX_PHYSMEM_RANGES; i++) { + memset(NODE_DATA(i), 0, sizeof(pg_data_t)); + NODE_DATA(i)->bdata = &bmem_data[i]; + } + memset(pfnnid_map, 0xff, sizeof(pfnnid_map)); + + for (i = 0; i < npmem_ranges; i++) + node_set_online(i); +#endif + + /* + * Initialize and free the full range of memory in each range. + * Note that the only writing these routines do are to the bootmap, + * and we've made sure to locate the bootmap properly so that they + * won't be writing over anything important. + */ + + bootmap_pfn = bootmap_start_pfn; + max_pfn = 0; + for (i = 0; i < npmem_ranges; i++) { + unsigned long start_pfn; + unsigned long npages; + + start_pfn = pmem_ranges[i].start_pfn; + npages = pmem_ranges[i].pages; + + bootmap_size = init_bootmem_node(NODE_DATA(i), + bootmap_pfn, + start_pfn, + (start_pfn + npages) ); + free_bootmem_node(NODE_DATA(i), + (start_pfn << PAGE_SHIFT), + (npages << PAGE_SHIFT) ); + bootmap_pfn += (bootmap_size + PAGE_SIZE - 1) >> PAGE_SHIFT; + if ((start_pfn + npages) > max_pfn) + max_pfn = start_pfn + npages; + } + + if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) { + printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n"); + BUG(); + } + + /* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */ + +#define PDC_CONSOLE_IO_IODC_SIZE 32768 + + reserve_bootmem_node(NODE_DATA(0), 0UL, + (unsigned long)(PAGE0->mem_free + PDC_CONSOLE_IO_IODC_SIZE)); + reserve_bootmem_node(NODE_DATA(0),__pa((unsigned long)&_text), + (unsigned long)(&_end - &_text)); + reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT), + ((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT)); + +#ifndef CONFIG_DISCONTIGMEM + + /* reserve the holes */ + + for (i = 0; i < npmem_holes; i++) { + reserve_bootmem_node(NODE_DATA(0), + (pmem_holes[i].start_pfn << PAGE_SHIFT), + (pmem_holes[i].pages << PAGE_SHIFT)); + } +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + printk(KERN_INFO "initrd: %08lx-%08lx\n", initrd_start, initrd_end); + if (__pa(initrd_start) < mem_max) { + unsigned long initrd_reserve; + + if (__pa(initrd_end) > mem_max) { + initrd_reserve = mem_max - __pa(initrd_start); + } else { + initrd_reserve = initrd_end - initrd_start; + } + initrd_below_start_ok = 1; + printk(KERN_INFO "initrd: reserving %08lx-%08lx (mem_max %08lx)\n", __pa(initrd_start), __pa(initrd_start) + initrd_reserve, mem_max); + + reserve_bootmem_node(NODE_DATA(0),__pa(initrd_start), initrd_reserve); + } + } +#endif + + data_resource.start = virt_to_phys(&data_start); + data_resource.end = virt_to_phys(&_end)-1; + code_resource.start = virt_to_phys(&_text); + code_resource.end = virt_to_phys(&data_start)-1; + + /* We don't know which region the kernel will be in, so try + * all of them. + */ + for (i = 0; i < sysram_resource_count; i++) { + struct resource *res = &sysram_resources[i]; + request_resource(res, &code_resource); + request_resource(res, &data_resource); + } + request_resource(&sysram_resources[0], &pdcdata_resource); +} + +void free_initmem(void) +{ + /* FIXME: */ +#if 0 + printk(KERN_INFO "NOT FREEING INITMEM (%dk)\n", + (&__init_end - &__init_begin) >> 10); + return; +#else + unsigned long addr; + + printk(KERN_INFO "Freeing unused kernel memory: "); + +#if 1 + /* Attempt to catch anyone trying to execute code here + * by filling the page with BRK insns. + * + * If we disable interrupts for all CPUs, then IPI stops working. + * Kinda breaks the global cache flushing. + */ + local_irq_disable(); + + memset(&__init_begin, 0x00, + (unsigned long)&__init_end - (unsigned long)&__init_begin); + + flush_data_cache(); + asm volatile("sync" : : ); + flush_icache_range((unsigned long)&__init_begin, (unsigned long)&__init_end); + asm volatile("sync" : : ); + + local_irq_enable(); +#endif + + addr = (unsigned long)(&__init_begin); + for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + set_page_count(virt_to_page(addr), 1); + free_page(addr); + num_physpages++; + totalram_pages++; + } + + /* set up a new led state on systems shipped LED State panel */ + pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE); + + printk("%luk freed\n", (unsigned long)(&__init_end - &__init_begin) >> 10); +#endif +} + +/* + * Just an arbitrary offset to serve as a "hole" between mapping areas + * (between top of physical memory and a potential pcxl dma mapping + * area, and below the vmalloc mapping area). + * + * The current 32K value just means that there will be a 32K "hole" + * between mapping areas. That means that any out-of-bounds memory + * accesses will hopefully be caught. The vmalloc() routines leaves + * a hole of 4kB between each vmalloced area for the same reason. + */ + + /* Leave room for gateway page expansion */ +#if KERNEL_MAP_START < GATEWAY_PAGE_SIZE +#error KERNEL_MAP_START is in gateway reserved region +#endif +#define MAP_START (KERNEL_MAP_START) + +#define VM_MAP_OFFSET (32*1024) +#define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \ + & ~(VM_MAP_OFFSET-1))) + +void *vmalloc_start; +EXPORT_SYMBOL(vmalloc_start); + +#ifdef CONFIG_PA11 +unsigned long pcxl_dma_start; +#endif + +void __init mem_init(void) +{ + high_memory = __va((max_pfn << PAGE_SHIFT)); + +#ifndef CONFIG_DISCONTIGMEM + max_mapnr = page_to_pfn(virt_to_page(high_memory - 1)) + 1; + totalram_pages += free_all_bootmem(); +#else + { + int i; + + for (i = 0; i < npmem_ranges; i++) + totalram_pages += free_all_bootmem_node(NODE_DATA(i)); + } +#endif + + printk(KERN_INFO "Memory: %luk available\n", num_physpages << (PAGE_SHIFT-10)); + +#ifdef CONFIG_PA11 + if (hppa_dma_ops == &pcxl_dma_ops) { + pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START); + vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE); + } else { + pcxl_dma_start = 0; + vmalloc_start = SET_MAP_OFFSET(MAP_START); + } +#else + vmalloc_start = SET_MAP_OFFSET(MAP_START); +#endif + +} + +int do_check_pgt_cache(int low, int high) +{ + return 0; +} + +unsigned long *empty_zero_page; + +void show_mem(void) +{ + int i,free = 0,total = 0,reserved = 0; + int shared = 0, cached = 0; + + printk(KERN_INFO "Mem-info:\n"); + show_free_areas(); + printk(KERN_INFO "Free swap: %6ldkB\n", + nr_swap_pages<<(PAGE_SHIFT-10)); +#ifndef CONFIG_DISCONTIGMEM + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (!page_count(&mem_map[i])) + free++; + else + shared += page_count(&mem_map[i]) - 1; + } +#else + for (i = 0; i < npmem_ranges; i++) { + int j; + + for (j = node_start_pfn(i); j < node_end_pfn(i); j++) { + struct page *p; + + p = node_mem_map(i) + j - node_start_pfn(i); + + total++; + if (PageReserved(p)) + reserved++; + else if (PageSwapCache(p)) + cached++; + else if (!page_count(p)) + free++; + else + shared += page_count(p) - 1; + } + } +#endif + printk(KERN_INFO "%d pages of RAM\n", total); + printk(KERN_INFO "%d reserved pages\n", reserved); + printk(KERN_INFO "%d pages shared\n", shared); + printk(KERN_INFO "%d pages swap cached\n", cached); + + +#ifdef CONFIG_DISCONTIGMEM + { + struct zonelist *zl; + int i, j, k; + + for (i = 0; i < npmem_ranges; i++) { + for (j = 0; j < MAX_NR_ZONES; j++) { + zl = NODE_DATA(i)->node_zonelists + j; + + printk("Zone list for zone %d on node %d: ", j, i); + for (k = 0; zl->zones[k] != NULL; k++) + printk("[%d/%s] ", zl->zones[k]->zone_pgdat->node_id, zl->zones[k]->name); + printk("\n"); + } + } + } +#endif +} + + +static void __init map_pages(unsigned long start_vaddr, unsigned long start_paddr, unsigned long size, pgprot_t pgprot) +{ + pgd_t *pg_dir; + pmd_t *pmd; + pte_t *pg_table; + unsigned long end_paddr; + unsigned long start_pmd; + unsigned long start_pte; + unsigned long tmp1; + unsigned long tmp2; + unsigned long address; + unsigned long ro_start; + unsigned long ro_end; + unsigned long fv_addr; + unsigned long gw_addr; + extern const unsigned long fault_vector_20; + extern void * const linux_gateway_page; + + ro_start = __pa((unsigned long)&_text); + ro_end = __pa((unsigned long)&data_start); + fv_addr = __pa((unsigned long)&fault_vector_20) & PAGE_MASK; + gw_addr = __pa((unsigned long)&linux_gateway_page) & PAGE_MASK; + + end_paddr = start_paddr + size; + + pg_dir = pgd_offset_k(start_vaddr); + +#if PTRS_PER_PMD == 1 + start_pmd = 0; +#else + start_pmd = ((start_vaddr >> PMD_SHIFT) & (PTRS_PER_PMD - 1)); +#endif + start_pte = ((start_vaddr >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); + + address = start_paddr; + while (address < end_paddr) { +#if PTRS_PER_PMD == 1 + pmd = (pmd_t *)__pa(pg_dir); +#else + pmd = (pmd_t *)pgd_address(*pg_dir); + + /* + * pmd is physical at this point + */ + + if (!pmd) { + pmd = (pmd_t *) alloc_bootmem_low_pages_node(NODE_DATA(0),PAGE_SIZE << PMD_ORDER); + pmd = (pmd_t *) __pa(pmd); + } + + pgd_populate(NULL, pg_dir, __va(pmd)); +#endif + pg_dir++; + + /* now change pmd to kernel virtual addresses */ + + pmd = (pmd_t *)__va(pmd) + start_pmd; + for (tmp1 = start_pmd; tmp1 < PTRS_PER_PMD; tmp1++,pmd++) { + + /* + * pg_table is physical at this point + */ + + pg_table = (pte_t *)pmd_address(*pmd); + if (!pg_table) { + pg_table = (pte_t *) + alloc_bootmem_low_pages_node(NODE_DATA(0),PAGE_SIZE); + pg_table = (pte_t *) __pa(pg_table); + } + + pmd_populate_kernel(NULL, pmd, __va(pg_table)); + + /* now change pg_table to kernel virtual addresses */ + + pg_table = (pte_t *) __va(pg_table) + start_pte; + for (tmp2 = start_pte; tmp2 < PTRS_PER_PTE; tmp2++,pg_table++) { + pte_t pte; + + /* + * Map the fault vector writable so we can + * write the HPMC checksum. + */ + if (address >= ro_start && address < ro_end + && address != fv_addr + && address != gw_addr) + pte = __mk_pte(address, PAGE_KERNEL_RO); + else + pte = __mk_pte(address, pgprot); + + if (address >= end_paddr) + pte_val(pte) = 0; + + set_pte(pg_table, pte); + + address += PAGE_SIZE; + } + start_pte = 0; + + if (address >= end_paddr) + break; + } + start_pmd = 0; + } +} + +/* + * pagetable_init() sets up the page tables + * + * Note that gateway_init() places the Linux gateway page at page 0. + * Since gateway pages cannot be dereferenced this has the desirable + * side effect of trapping those pesky NULL-reference errors in the + * kernel. + */ +static void __init pagetable_init(void) +{ + int range; + + /* Map each physical memory range to its kernel vaddr */ + + for (range = 0; range < npmem_ranges; range++) { + unsigned long start_paddr; + unsigned long end_paddr; + unsigned long size; + + start_paddr = pmem_ranges[range].start_pfn << PAGE_SHIFT; + end_paddr = start_paddr + (pmem_ranges[range].pages << PAGE_SHIFT); + size = pmem_ranges[range].pages << PAGE_SHIFT; + + map_pages((unsigned long)__va(start_paddr), start_paddr, + size, PAGE_KERNEL); + } + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_end && initrd_end > mem_limit) { + printk("initrd: mapping %08lx-%08lx\n", initrd_start, initrd_end); + map_pages(initrd_start, __pa(initrd_start), + initrd_end - initrd_start, PAGE_KERNEL); + } +#endif + + empty_zero_page = alloc_bootmem_pages(PAGE_SIZE); + memset(empty_zero_page, 0, PAGE_SIZE); +} + +static void __init gateway_init(void) +{ + unsigned long linux_gateway_page_addr; + /* FIXME: This is 'const' in order to trick the compiler + into not treating it as DP-relative data. */ + extern void * const linux_gateway_page; + + linux_gateway_page_addr = LINUX_GATEWAY_ADDR & PAGE_MASK; + + /* + * Setup Linux Gateway page. + * + * The Linux gateway page will reside in kernel space (on virtual + * page 0), so it doesn't need to be aliased into user space. + */ + + map_pages(linux_gateway_page_addr, __pa(&linux_gateway_page), + PAGE_SIZE, PAGE_GATEWAY); +} + +#ifdef CONFIG_HPUX +void +map_hpux_gateway_page(struct task_struct *tsk, struct mm_struct *mm) +{ + pgd_t *pg_dir; + pmd_t *pmd; + pte_t *pg_table; + unsigned long start_pmd; + unsigned long start_pte; + unsigned long address; + unsigned long hpux_gw_page_addr; + /* FIXME: This is 'const' in order to trick the compiler + into not treating it as DP-relative data. */ + extern void * const hpux_gateway_page; + + hpux_gw_page_addr = HPUX_GATEWAY_ADDR & PAGE_MASK; + + /* + * Setup HP-UX Gateway page. + * + * The HP-UX gateway page resides in the user address space, + * so it needs to be aliased into each process. + */ + + pg_dir = pgd_offset(mm,hpux_gw_page_addr); + +#if PTRS_PER_PMD == 1 + start_pmd = 0; +#else + start_pmd = ((hpux_gw_page_addr >> PMD_SHIFT) & (PTRS_PER_PMD - 1)); +#endif + start_pte = ((hpux_gw_page_addr >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); + + address = __pa(&hpux_gateway_page); +#if PTRS_PER_PMD == 1 + pmd = (pmd_t *)__pa(pg_dir); +#else + pmd = (pmd_t *) pgd_address(*pg_dir); + + /* + * pmd is physical at this point + */ + + if (!pmd) { + pmd = (pmd_t *) get_zeroed_page(GFP_KERNEL); + pmd = (pmd_t *) __pa(pmd); + } + + __pgd_val_set(*pg_dir, PxD_FLAG_PRESENT | PxD_FLAG_VALID | (unsigned long) pmd); +#endif + /* now change pmd to kernel virtual addresses */ + + pmd = (pmd_t *)__va(pmd) + start_pmd; + + /* + * pg_table is physical at this point + */ + + pg_table = (pte_t *) pmd_address(*pmd); + if (!pg_table) + pg_table = (pte_t *) __pa(get_zeroed_page(GFP_KERNEL)); + + __pmd_val_set(*pmd, PxD_FLAG_PRESENT | PxD_FLAG_VALID | (unsigned long) pg_table); + + /* now change pg_table to kernel virtual addresses */ + + pg_table = (pte_t *) __va(pg_table) + start_pte; + set_pte(pg_table, __mk_pte(address, PAGE_GATEWAY)); +} +EXPORT_SYMBOL(map_hpux_gateway_page); +#endif + +extern void flush_tlb_all_local(void); + +void __init paging_init(void) +{ + int i; + + setup_bootmem(); + pagetable_init(); + gateway_init(); + flush_cache_all_local(); /* start with known state */ + flush_tlb_all_local(); + + for (i = 0; i < npmem_ranges; i++) { + unsigned long zones_size[MAX_NR_ZONES] = { 0, 0, 0 }; + + /* We have an IOMMU, so all memory can go into a single + ZONE_DMA zone. */ + zones_size[ZONE_DMA] = pmem_ranges[i].pages; + +#ifdef CONFIG_DISCONTIGMEM + /* Need to initialize the pfnnid_map before we can initialize + the zone */ + { + int j; + for (j = (pmem_ranges[i].start_pfn >> PFNNID_SHIFT); + j <= ((pmem_ranges[i].start_pfn + pmem_ranges[i].pages) >> PFNNID_SHIFT); + j++) { + pfnnid_map[j] = i; + } + } +#endif + + free_area_init_node(i, NODE_DATA(i), zones_size, + pmem_ranges[i].start_pfn, NULL); + } +} + +#ifdef CONFIG_PA20 + +/* + * Currently, all PA20 chips have 18 bit protection id's, which is the + * limiting factor (space ids are 32 bits). + */ + +#define NR_SPACE_IDS 262144 + +#else + +/* + * Currently we have a one-to-one relationship between space id's and + * protection id's. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only + * support 15 bit protection id's, so that is the limiting factor. + * PCXT' has 18 bit protection id's, but only 16 bit spaceids, so it's + * probably not worth the effort for a special case here. + */ + +#define NR_SPACE_IDS 32768 + +#endif /* !CONFIG_PA20 */ + +#define RECYCLE_THRESHOLD (NR_SPACE_IDS / 2) +#define SID_ARRAY_SIZE (NR_SPACE_IDS / (8 * sizeof(long))) + +static unsigned long space_id[SID_ARRAY_SIZE] = { 1 }; /* disallow space 0 */ +static unsigned long dirty_space_id[SID_ARRAY_SIZE]; +static unsigned long space_id_index; +static unsigned long free_space_ids = NR_SPACE_IDS - 1; +static unsigned long dirty_space_ids = 0; + +static DEFINE_SPINLOCK(sid_lock); + +unsigned long alloc_sid(void) +{ + unsigned long index; + + spin_lock(&sid_lock); + + if (free_space_ids == 0) { + if (dirty_space_ids != 0) { + spin_unlock(&sid_lock); + flush_tlb_all(); /* flush_tlb_all() calls recycle_sids() */ + spin_lock(&sid_lock); + } + if (free_space_ids == 0) + BUG(); + } + + free_space_ids--; + + index = find_next_zero_bit(space_id, NR_SPACE_IDS, space_id_index); + space_id[index >> SHIFT_PER_LONG] |= (1L << (index & (BITS_PER_LONG - 1))); + space_id_index = index; + + spin_unlock(&sid_lock); + + return index << SPACEID_SHIFT; +} + +void free_sid(unsigned long spaceid) +{ + unsigned long index = spaceid >> SPACEID_SHIFT; + unsigned long *dirty_space_offset; + + dirty_space_offset = dirty_space_id + (index >> SHIFT_PER_LONG); + index &= (BITS_PER_LONG - 1); + + spin_lock(&sid_lock); + + if (*dirty_space_offset & (1L << index)) + BUG(); /* attempt to free space id twice */ + + *dirty_space_offset |= (1L << index); + dirty_space_ids++; + + spin_unlock(&sid_lock); +} + + +#ifdef CONFIG_SMP +static void get_dirty_sids(unsigned long *ndirtyptr,unsigned long *dirty_array) +{ + int i; + + /* NOTE: sid_lock must be held upon entry */ + + *ndirtyptr = dirty_space_ids; + if (dirty_space_ids != 0) { + for (i = 0; i < SID_ARRAY_SIZE; i++) { + dirty_array[i] = dirty_space_id[i]; + dirty_space_id[i] = 0; + } + dirty_space_ids = 0; + } + + return; +} + +static void recycle_sids(unsigned long ndirty,unsigned long *dirty_array) +{ + int i; + + /* NOTE: sid_lock must be held upon entry */ + + if (ndirty != 0) { + for (i = 0; i < SID_ARRAY_SIZE; i++) { + space_id[i] ^= dirty_array[i]; + } + + free_space_ids += ndirty; + space_id_index = 0; + } +} + +#else /* CONFIG_SMP */ + +static void recycle_sids(void) +{ + int i; + + /* NOTE: sid_lock must be held upon entry */ + + if (dirty_space_ids != 0) { + for (i = 0; i < SID_ARRAY_SIZE; i++) { + space_id[i] ^= dirty_space_id[i]; + dirty_space_id[i] = 0; + } + + free_space_ids += dirty_space_ids; + dirty_space_ids = 0; + space_id_index = 0; + } +} +#endif + +/* + * flush_tlb_all() calls recycle_sids(), since whenever the entire tlb is + * purged, we can safely reuse the space ids that were released but + * not flushed from the tlb. + */ + +#ifdef CONFIG_SMP + +static unsigned long recycle_ndirty; +static unsigned long recycle_dirty_array[SID_ARRAY_SIZE]; +static unsigned int recycle_inuse = 0; + +void flush_tlb_all(void) +{ + int do_recycle; + + do_recycle = 0; + spin_lock(&sid_lock); + if (dirty_space_ids > RECYCLE_THRESHOLD) { + if (recycle_inuse) { + BUG(); /* FIXME: Use a semaphore/wait queue here */ + } + get_dirty_sids(&recycle_ndirty,recycle_dirty_array); + recycle_inuse++; + do_recycle++; + } + spin_unlock(&sid_lock); + on_each_cpu((void (*)(void *))flush_tlb_all_local, NULL, 1, 1); + if (do_recycle) { + spin_lock(&sid_lock); + recycle_sids(recycle_ndirty,recycle_dirty_array); + recycle_inuse = 0; + spin_unlock(&sid_lock); + } +} +#else +void flush_tlb_all(void) +{ + spin_lock(&sid_lock); + flush_tlb_all_local(); + recycle_sids(); + spin_unlock(&sid_lock); +} +#endif + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ +#if 0 + if (start < end) + printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10); + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + set_page_count(virt_to_page(start), 1); + free_page(start); + num_physpages++; + totalram_pages++; + } +#endif +} +#endif diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c new file mode 100644 index 000000000000..f2df502cdae3 --- /dev/null +++ b/arch/parisc/mm/ioremap.c @@ -0,0 +1,207 @@ +/* + * arch/parisc/mm/ioremap.c + * + * Re-map IO memory to kernel address space so that we can access it. + * This is needed for high PCI addresses that aren't mapped in the + * 640k-1MB IO memory area on PC's + * + * (C) Copyright 1995 1996 Linus Torvalds + * (C) Copyright 2001 Helge Deller + */ + +#include +#include +#include +#include +#include + +static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, + unsigned long phys_addr, unsigned long flags) +{ + unsigned long end; + + address &= ~PMD_MASK; + end = address + size; + if (end > PMD_SIZE) + end = PMD_SIZE; + if (address >= end) + BUG(); + do { + if (!pte_none(*pte)) { + printk(KERN_ERR "remap_area_pte: page already exists\n"); + BUG(); + } + set_pte(pte, mk_pte_phys(phys_addr, __pgprot(_PAGE_PRESENT | _PAGE_RW | + _PAGE_DIRTY | _PAGE_ACCESSED | flags))); + address += PAGE_SIZE; + phys_addr += PAGE_SIZE; + pte++; + } while (address && (address < end)); +} + +static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size, + unsigned long phys_addr, unsigned long flags) +{ + unsigned long end; + + address &= ~PGDIR_MASK; + end = address + size; + if (end > PGDIR_SIZE) + end = PGDIR_SIZE; + phys_addr -= address; + if (address >= end) + BUG(); + do { + pte_t * pte = pte_alloc_kernel(NULL, pmd, address); + if (!pte) + return -ENOMEM; + remap_area_pte(pte, address, end - address, address + phys_addr, flags); + address = (address + PMD_SIZE) & PMD_MASK; + pmd++; + } while (address && (address < end)); + return 0; +} + +#if (USE_HPPA_IOREMAP) +static int remap_area_pages(unsigned long address, unsigned long phys_addr, + unsigned long size, unsigned long flags) +{ + int error; + pgd_t * dir; + unsigned long end = address + size; + + phys_addr -= address; + dir = pgd_offset(&init_mm, address); + flush_cache_all(); + if (address >= end) + BUG(); + spin_lock(&init_mm.page_table_lock); + do { + pmd_t *pmd; + pmd = pmd_alloc(dir, address); + error = -ENOMEM; + if (!pmd) + break; + if (remap_area_pmd(pmd, address, end - address, + phys_addr + address, flags)) + break; + error = 0; + address = (address + PGDIR_SIZE) & PGDIR_MASK; + dir++; + } while (address && (address < end)); + spin_unlock(&init_mm.page_table_lock); + flush_tlb_all(); + return error; +} +#endif /* USE_HPPA_IOREMAP */ + +#ifdef CONFIG_DEBUG_IOREMAP +static unsigned long last = 0; + +void gsc_bad_addr(unsigned long addr) +{ + if (time_after(jiffies, last + HZ*10)) { + printk("gsc_foo() called with bad address 0x%lx\n", addr); + dump_stack(); + last = jiffies; + } +} +EXPORT_SYMBOL(gsc_bad_addr); + +void __raw_bad_addr(const volatile void __iomem *addr) +{ + if (time_after(jiffies, last + HZ*10)) { + printk("__raw_foo() called with bad address 0x%p\n", addr); + dump_stack(); + last = jiffies; + } +} +EXPORT_SYMBOL(__raw_bad_addr); +#endif + +/* + * Generic mapping function (not visible outside): + */ + +/* + * Remap an arbitrary physical address space into the kernel virtual + * address space. Needed when the kernel wants to access high addresses + * directly. + * + * NOTE! We need to allow non-page-aligned mappings too: we will obviously + * have to convert them into an offset in a page-aligned mapping, but the + * caller shouldn't need to know that small detail. + */ +void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +{ +#if !(USE_HPPA_IOREMAP) + + unsigned long end = phys_addr + size - 1; + /* Support EISA addresses */ + if ((phys_addr >= 0x00080000 && end < 0x000fffff) + || (phys_addr >= 0x00500000 && end < 0x03bfffff)) { + phys_addr |= 0xfc000000; + } + +#ifdef CONFIG_DEBUG_IOREMAP + return (void __iomem *)(phys_addr - (0x1UL << NYBBLE_SHIFT)); +#else + return (void __iomem *)phys_addr; +#endif + +#else + void * addr; + struct vm_struct * area; + unsigned long offset, last_addr; + + /* Don't allow wraparound or zero size */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + /* + * Don't allow anybody to remap normal RAM that we're using.. + */ + if (phys_addr < virt_to_phys(high_memory)) { + char *t_addr, *t_end; + struct page *page; + + t_addr = __va(phys_addr); + t_end = t_addr + (size - 1); + + for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++) + if(!PageReserved(page)) + return NULL; + } + + /* + * Mappings have to be page-aligned + */ + offset = phys_addr & ~PAGE_MASK; + phys_addr &= PAGE_MASK; + size = PAGE_ALIGN(last_addr) - phys_addr; + + /* + * Ok, go for it.. + */ + area = get_vm_area(size, VM_IOREMAP); + if (!area) + return NULL; + addr = area->addr; + if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { + vfree(addr); + return NULL; + } + return (void __iomem *) (offset + (char *)addr); +#endif +} + +void iounmap(void __iomem *addr) +{ +#if !(USE_HPPA_IOREMAP) + return; +#else + if (addr > high_memory) + return vfree((void *) (PAGE_MASK & (unsigned long __force) addr)); +#endif +} diff --git a/arch/parisc/mm/kmap.c b/arch/parisc/mm/kmap.c new file mode 100644 index 000000000000..1b1acd5e2f6e --- /dev/null +++ b/arch/parisc/mm/kmap.c @@ -0,0 +1,166 @@ +/* + * kmap/page table map and unmap support routines + * + * Copyright 1999,2000 Hewlett-Packard Company + * Copyright 2000 John Marvin + * Copyright 2000 Grant Grundler + * Copyright 2000 Philipp Rumpf + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* +** Stolen mostly from arch/parisc/kernel/pci-dma.c +*/ + +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include /* get_order */ + +#undef flush_cache_all +#define flush_cache_all flush_all_caches + +typedef void (*pte_iterator_t) (pte_t * pte, unsigned long arg); + +#if 0 +/* XXX This routine could be used with iterate_page() to replace + * unmap_uncached_page() and save a little code space but I didn't + * do that since I'm not certain whether this is the right path. -PB + */ +static void unmap_cached_pte(pte_t * pte, unsigned long addr, unsigned long arg) +{ + pte_t page = *pte; + pte_clear(&init_mm, addr, pte); + if (!pte_none(page)) { + if (pte_present(page)) { + unsigned long map_nr = pte_pagenr(page); + if (map_nr < max_mapnr) + __free_page(mem_map + map_nr); + } else { + printk(KERN_CRIT + "Whee.. Swapped out page in kernel page table\n"); + } + } +} +#endif + +/* These two routines should probably check a few things... */ +static void set_uncached(pte_t * pte, unsigned long arg) +{ + pte_val(*pte) |= _PAGE_NO_CACHE; +} + +static void set_cached(pte_t * pte, unsigned long arg) +{ + pte_val(*pte) &= ~_PAGE_NO_CACHE; +} + +static inline void iterate_pte(pmd_t * pmd, unsigned long address, + unsigned long size, pte_iterator_t op, + unsigned long arg) +{ + pte_t *pte; + unsigned long end; + + if (pmd_none(*pmd)) + return; + if (pmd_bad(*pmd)) { + pmd_ERROR(*pmd); + pmd_clear(pmd); + return; + } + pte = pte_offset(pmd, address); + address &= ~PMD_MASK; + end = address + size; + if (end > PMD_SIZE) + end = PMD_SIZE; + do { + op(pte, arg); + address += PAGE_SIZE; + pte++; + } while (address < end); +} + +static inline void iterate_pmd(pgd_t * dir, unsigned long address, + unsigned long size, pte_iterator_t op, + unsigned long arg) +{ + pmd_t *pmd; + unsigned long end; + + if (pgd_none(*dir)) + return; + if (pgd_bad(*dir)) { + pgd_ERROR(*dir); + pgd_clear(dir); + return; + } + pmd = pmd_offset(dir, address); + address &= ~PGDIR_MASK; + end = address + size; + if (end > PGDIR_SIZE) + end = PGDIR_SIZE; + do { + iterate_pte(pmd, address, end - address, op, arg); + address = (address + PMD_SIZE) & PMD_MASK; + pmd++; + } while (address < end); +} + +static void iterate_pages(unsigned long address, unsigned long size, + pte_iterator_t op, unsigned long arg) +{ + pgd_t *dir; + unsigned long end = address + size; + + dir = pgd_offset_k(address); + flush_cache_all(); + do { + iterate_pmd(dir, address, end - address, op, arg); + address = (address + PGDIR_SIZE) & PGDIR_MASK; + dir++; + } while (address && (address < end)); + flush_tlb_all(); +} + +void +kernel_set_cachemode(unsigned long vaddr, unsigned long size, int what) +{ + switch (what) { + case IOMAP_FULL_CACHING: + iterate_pages(vaddr, size, set_cached, 0); + flush_tlb_range(NULL, vaddr, size); + break; + case IOMAP_NOCACHE_SER: + iterate_pages(vaddr, size, set_uncached, 0); + flush_tlb_range(NULL, vaddr, size); + break; + default: + printk(KERN_CRIT + "kernel_set_cachemode mode %d not understood\n", + what); + break; + } +} diff --git a/arch/parisc/nm b/arch/parisc/nm new file mode 100644 index 000000000000..c788308de33f --- /dev/null +++ b/arch/parisc/nm @@ -0,0 +1,6 @@ +#!/bin/sh +## +# Hack to have an nm which removes the local symbols. We also rely +# on this nm being hidden out of the ordinarily executable path +## +${CROSS_COMPILE}nm $* | grep -v '.LC*[0-9]*$' diff --git a/arch/parisc/oprofile/Kconfig b/arch/parisc/oprofile/Kconfig new file mode 100644 index 000000000000..5ade19801b97 --- /dev/null +++ b/arch/parisc/oprofile/Kconfig @@ -0,0 +1,23 @@ + +menu "Profiling support" + depends on EXPERIMENTAL + +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + + +config OPROFILE + tristate "OProfile system profiling (EXPERIMENTAL)" + depends on PROFILING + help + OProfile is a profiling system capable of profiling the + whole system, include the kernel, kernel modules, libraries, + and applications. + + If unsure, say N. + +endmenu + diff --git a/arch/parisc/oprofile/Makefile b/arch/parisc/oprofile/Makefile new file mode 100644 index 000000000000..e9feca1ca28b --- /dev/null +++ b/arch/parisc/oprofile/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) init.o diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c new file mode 100644 index 000000000000..a5b898c4d0b0 --- /dev/null +++ b/arch/parisc/oprofile/init.c @@ -0,0 +1,23 @@ +/** + * @file init.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author John Levon + */ + +#include +#include +#include +#include + +int __init oprofile_arch_init(struct oprofile_operations * ops) +{ + return -ENODEV; +} + + +void oprofile_arch_exit() +{ +} -- cgit v1.2.3