From cdd6c482c9ff9c55475ee7392ec8f672eddb7be6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 21 Sep 2009 12:02:48 +0200 Subject: perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian Acked-by: Peter Zijlstra Acked-by: Paul Mackerras Reviewed-by: Arjan van de Ven Cc: Mike Galbraith Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Benjamin Herrenschmidt Cc: David Howells Cc: Kyle McMartin Cc: Martin Schwidefsky Cc: "David S. Miller" Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: LKML-Reference: Signed-off-by: Ingo Molnar --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/hw_irq.h | 22 +- arch/powerpc/include/asm/paca.h | 2 +- arch/powerpc/include/asm/perf_counter.h | 110 --- arch/powerpc/include/asm/perf_event.h | 110 +++ arch/powerpc/include/asm/systbl.h | 2 +- arch/powerpc/include/asm/unistd.h | 2 +- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/asm-offsets.c | 2 +- arch/powerpc/kernel/entry_64.S | 8 +- arch/powerpc/kernel/irq.c | 8 +- arch/powerpc/kernel/mpc7450-pmu.c | 2 +- arch/powerpc/kernel/perf_callchain.c | 2 +- arch/powerpc/kernel/perf_counter.c | 1315 ------------------------------- arch/powerpc/kernel/perf_event.c | 1315 +++++++++++++++++++++++++++++++ arch/powerpc/kernel/power4-pmu.c | 2 +- arch/powerpc/kernel/power5+-pmu.c | 2 +- arch/powerpc/kernel/power5-pmu.c | 2 +- arch/powerpc/kernel/power6-pmu.c | 2 +- arch/powerpc/kernel/power7-pmu.c | 2 +- arch/powerpc/kernel/ppc970-pmu.c | 2 +- arch/powerpc/kernel/time.c | 30 +- arch/powerpc/mm/fault.c | 8 +- arch/powerpc/platforms/Kconfig.cputype | 4 +- 24 files changed, 1479 insertions(+), 1479 deletions(-) delete mode 100644 arch/powerpc/include/asm/perf_counter.h create mode 100644 arch/powerpc/include/asm/perf_event.h delete mode 100644 arch/powerpc/kernel/perf_counter.c create mode 100644 arch/powerpc/kernel/perf_event.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 8250902265c6..4fd479059d65 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -129,7 +129,7 @@ config PPC select HAVE_OPROFILE select HAVE_SYSCALL_WRAPPERS if PPC64 select GENERIC_ATOMIC64 if PPC32 - select HAVE_PERF_COUNTERS + select HAVE_PERF_EVENTS config EARLY_PRINTK bool diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index e73d554538dd..abbc2aaaced5 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -135,43 +135,43 @@ static inline int irqs_disabled_flags(unsigned long flags) */ struct irq_chip; -#ifdef CONFIG_PERF_COUNTERS +#ifdef CONFIG_PERF_EVENTS #ifdef CONFIG_PPC64 -static inline unsigned long test_perf_counter_pending(void) +static inline unsigned long test_perf_event_pending(void) { unsigned long x; asm volatile("lbz %0,%1(13)" : "=r" (x) - : "i" (offsetof(struct paca_struct, perf_counter_pending))); + : "i" (offsetof(struct paca_struct, perf_event_pending))); return x; } -static inline void set_perf_counter_pending(void) +static inline void set_perf_event_pending(void) { asm volatile("stb %0,%1(13)" : : "r" (1), - "i" (offsetof(struct paca_struct, perf_counter_pending))); + "i" (offsetof(struct paca_struct, perf_event_pending))); } -static inline void clear_perf_counter_pending(void) +static inline void clear_perf_event_pending(void) { asm volatile("stb %0,%1(13)" : : "r" (0), - "i" (offsetof(struct paca_struct, perf_counter_pending))); + "i" (offsetof(struct paca_struct, perf_event_pending))); } #endif /* CONFIG_PPC64 */ -#else /* CONFIG_PERF_COUNTERS */ +#else /* CONFIG_PERF_EVENTS */ -static inline unsigned long test_perf_counter_pending(void) +static inline unsigned long test_perf_event_pending(void) { return 0; } -static inline void clear_perf_counter_pending(void) {} -#endif /* CONFIG_PERF_COUNTERS */ +static inline void clear_perf_event_pending(void) {} +#endif /* CONFIG_PERF_EVENTS */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index b634456ea893..154f405b642f 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -122,7 +122,7 @@ struct paca_struct { u8 soft_enabled; /* irq soft-enable flag */ u8 hard_enabled; /* set if irqs are enabled in MSR */ u8 io_sync; /* writel() needs spin_unlock sync */ - u8 perf_counter_pending; /* PM interrupt while soft-disabled */ + u8 perf_event_pending; /* PM interrupt while soft-disabled */ /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h deleted file mode 100644 index 0ea0639fcf75..000000000000 --- a/arch/powerpc/include/asm/perf_counter.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Performance counter support - PowerPC-specific definitions. - * - * Copyright 2008-2009 Paul Mackerras, IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include - -#include - -#define MAX_HWCOUNTERS 8 -#define MAX_EVENT_ALTERNATIVES 8 -#define MAX_LIMITED_HWCOUNTERS 2 - -/* - * This struct provides the constants and functions needed to - * describe the PMU on a particular POWER-family CPU. - */ -struct power_pmu { - const char *name; - int n_counter; - int max_alternatives; - unsigned long add_fields; - unsigned long test_adder; - int (*compute_mmcr)(u64 events[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]); - int (*get_constraint)(u64 event, unsigned long *mskp, - unsigned long *valp); - int (*get_alternatives)(u64 event, unsigned int flags, - u64 alt[]); - void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); - int (*limited_pmc_event)(u64 event); - u32 flags; - int n_generic; - int *generic_events; - int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; -}; - -/* - * Values for power_pmu.flags - */ -#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ -#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ - -/* - * Values for flags to get_alternatives() - */ -#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ -#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ -#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ - -extern int register_power_pmu(struct power_pmu *); - -struct pt_regs; -extern unsigned long perf_misc_flags(struct pt_regs *regs); -extern unsigned long perf_instruction_pointer(struct pt_regs *regs); - -#define PERF_COUNTER_INDEX_OFFSET 1 - -/* - * Only override the default definitions in include/linux/perf_counter.h - * if we have hardware PMU support. - */ -#ifdef CONFIG_PPC_PERF_CTRS -#define perf_misc_flags(regs) perf_misc_flags(regs) -#endif - -/* - * The power_pmu.get_constraint function returns a 32/64-bit value and - * a 32/64-bit mask that express the constraints between this event and - * other events. - * - * The value and mask are divided up into (non-overlapping) bitfields - * of three different types: - * - * Select field: this expresses the constraint that some set of bits - * in MMCR* needs to be set to a specific value for this event. For a - * select field, the mask contains 1s in every bit of the field, and - * the value contains a unique value for each possible setting of the - * MMCR* bits. The constraint checking code will ensure that two events - * that set the same field in their masks have the same value in their - * value dwords. - * - * Add field: this expresses the constraint that there can be at most - * N events in a particular class. A field of k bits can be used for - * N <= 2^(k-1) - 1. The mask has the most significant bit of the field - * set (and the other bits 0), and the value has only the least significant - * bit of the field set. In addition, the 'add_fields' and 'test_adder' - * in the struct power_pmu for this processor come into play. The - * add_fields value contains 1 in the LSB of the field, and the - * test_adder contains 2^(k-1) - 1 - N in the field. - * - * NAND field: this expresses the constraint that you may not have events - * in all of a set of classes. (For example, on PPC970, you can't select - * events from the FPU, ISU and IDU simultaneously, although any two are - * possible.) For N classes, the field is N+1 bits wide, and each class - * is assigned one bit from the least-significant N bits. The mask has - * only the most-significant bit set, and the value has only the bit - * for the event's class set. The test_adder has the least significant - * bit set in the field. - * - * If an event is not subject to the constraint expressed by a particular - * field, then it will have 0 in both the mask and value for that field. - */ diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h new file mode 100644 index 000000000000..2499aaadaeb9 --- /dev/null +++ b/arch/powerpc/include/asm/perf_event.h @@ -0,0 +1,110 @@ +/* + * Performance event support - PowerPC-specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include + +#include + +#define MAX_HWEVENTS 8 +#define MAX_EVENT_ALTERNATIVES 8 +#define MAX_LIMITED_HWEVENTS 2 + +/* + * This struct provides the constants and functions needed to + * describe the PMU on a particular POWER-family CPU. + */ +struct power_pmu { + const char *name; + int n_event; + int max_alternatives; + unsigned long add_fields; + unsigned long test_adder; + int (*compute_mmcr)(u64 events[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]); + int (*get_constraint)(u64 event_id, unsigned long *mskp, + unsigned long *valp); + int (*get_alternatives)(u64 event_id, unsigned int flags, + u64 alt[]); + void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); + int (*limited_pmc_event)(u64 event_id); + u32 flags; + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +/* + * Values for power_pmu.flags + */ +#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ +#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ + +/* + * Values for flags to get_alternatives() + */ +#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ +#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ +#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ + +extern int register_power_pmu(struct power_pmu *); + +struct pt_regs; +extern unsigned long perf_misc_flags(struct pt_regs *regs); +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); + +#define PERF_EVENT_INDEX_OFFSET 1 + +/* + * Only override the default definitions in include/linux/perf_event.h + * if we have hardware PMU support. + */ +#ifdef CONFIG_PPC_PERF_CTRS +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + +/* + * The power_pmu.get_constraint function returns a 32/64-bit value and + * a 32/64-bit mask that express the constraints between this event_id and + * other events. + * + * The value and mask are divided up into (non-overlapping) bitfields + * of three different types: + * + * Select field: this expresses the constraint that some set of bits + * in MMCR* needs to be set to a specific value for this event_id. For a + * select field, the mask contains 1s in every bit of the field, and + * the value contains a unique value for each possible setting of the + * MMCR* bits. The constraint checking code will ensure that two events + * that set the same field in their masks have the same value in their + * value dwords. + * + * Add field: this expresses the constraint that there can be at most + * N events in a particular class. A field of k bits can be used for + * N <= 2^(k-1) - 1. The mask has the most significant bit of the field + * set (and the other bits 0), and the value has only the least significant + * bit of the field set. In addition, the 'add_fields' and 'test_adder' + * in the struct power_pmu for this processor come into play. The + * add_fields value contains 1 in the LSB of the field, and the + * test_adder contains 2^(k-1) - 1 - N in the field. + * + * NAND field: this expresses the constraint that you may not have events + * in all of a set of classes. (For example, on PPC970, you can't select + * events from the FPU, ISU and IDU simultaneously, although any two are + * possible.) For N classes, the field is N+1 bits wide, and each class + * is assigned one bit from the least-significant N bits. The mask has + * only the most-significant bit set, and the value has only the bit + * for the event_id's class set. The test_adder has the least significant + * bit set in the field. + * + * If an event_id is not subject to the constraint expressed by a particular + * field, then it will have 0 in both the mask and value for that field. + */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index ed24bd92fe49..c7d671a7d9a1 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -322,7 +322,7 @@ SYSCALL_SPU(epoll_create1) SYSCALL_SPU(dup3) SYSCALL_SPU(pipe2) SYSCALL(inotify_init1) -SYSCALL_SPU(perf_counter_open) +SYSCALL_SPU(perf_event_open) COMPAT_SYS_SPU(preadv) COMPAT_SYS_SPU(pwritev) COMPAT_SYS(rt_tgsigqueueinfo) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index cef080bfc607..f6ca76176766 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -341,7 +341,7 @@ #define __NR_dup3 316 #define __NR_pipe2 317 #define __NR_inotify_init1 318 -#define __NR_perf_counter_open 319 +#define __NR_perf_event_open 319 #define __NR_preadv 320 #define __NR_pwritev 321 #define __NR_rt_tgsigqueueinfo 322 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 569f79ccd310..b23664a0b86c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -97,7 +97,7 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o -obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o perf_callchain.o +obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o perf_callchain.o obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index f0df285f0f87..0812b0f414bb 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -133,7 +133,7 @@ int main(void) DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr)); DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); - DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending)); + DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_event_pending)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); #ifdef CONFIG_PPC_MM_SLICES DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct, diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 66bcda34a6bb..900e0eea0099 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -556,14 +556,14 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) 2: TRACE_AND_RESTORE_IRQ(r5); -#ifdef CONFIG_PERF_COUNTERS - /* check paca->perf_counter_pending if we're enabling ints */ +#ifdef CONFIG_PERF_EVENTS + /* check paca->perf_event_pending if we're enabling ints */ lbz r3,PACAPERFPEND(r13) and. r3,r3,r5 beq 27f - bl .perf_counter_do_pending + bl .perf_event_do_pending 27: -#endif /* CONFIG_PERF_COUNTERS */ +#endif /* CONFIG_PERF_EVENTS */ /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index f7f376ea7b17..e5d121177984 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -53,7 +53,7 @@ #include #include #include -#include +#include #include #include @@ -138,9 +138,9 @@ notrace void raw_local_irq_restore(unsigned long en) } #endif /* CONFIG_PPC_STD_MMU_64 */ - if (test_perf_counter_pending()) { - clear_perf_counter_pending(); - perf_counter_do_pending(); + if (test_perf_event_pending()) { + clear_perf_event_pending(); + perf_event_do_pending(); } /* diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c index cc466d039af6..09d72028f317 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/kernel/mpc7450-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c index f74b62c67511..0a03cf70d247 100644 --- a/arch/powerpc/kernel/perf_callchain.c +++ b/arch/powerpc/kernel/perf_callchain.c @@ -10,7 +10,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c deleted file mode 100644 index 5ccf9bca96c0..000000000000 --- a/arch/powerpc/kernel/perf_counter.c +++ /dev/null @@ -1,1315 +0,0 @@ -/* - * Performance counter support - powerpc architecture code - * - * Copyright 2008-2009 Paul Mackerras, IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct cpu_hw_counters { - int n_counters; - int n_percpu; - int disabled; - int n_added; - int n_limited; - u8 pmcs_enabled; - struct perf_counter *counter[MAX_HWCOUNTERS]; - u64 events[MAX_HWCOUNTERS]; - unsigned int flags[MAX_HWCOUNTERS]; - unsigned long mmcr[3]; - struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS]; - u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS]; - u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; - unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES]; -}; -DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters); - -struct power_pmu *ppmu; - -/* - * Normally, to ignore kernel events we set the FCS (freeze counters - * in supervisor mode) bit in MMCR0, but if the kernel runs with the - * hypervisor bit set in the MSR, or if we are running on a processor - * where the hypervisor bit is forced to 1 (as on Apple G5 processors), - * then we need to use the FCHV bit to ignore kernel events. - */ -static unsigned int freeze_counters_kernel = MMCR0_FCS; - -/* - * 32-bit doesn't have MMCRA but does have an MMCR2, - * and a few other names are different. - */ -#ifdef CONFIG_PPC32 - -#define MMCR0_FCHV 0 -#define MMCR0_PMCjCE MMCR0_PMCnCE - -#define SPRN_MMCRA SPRN_MMCR2 -#define MMCRA_SAMPLE_ENABLE 0 - -static inline unsigned long perf_ip_adjust(struct pt_regs *regs) -{ - return 0; -} -static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } -static inline u32 perf_get_misc_flags(struct pt_regs *regs) -{ - return 0; -} -static inline void perf_read_regs(struct pt_regs *regs) { } -static inline int perf_intr_is_nmi(struct pt_regs *regs) -{ - return 0; -} - -#endif /* CONFIG_PPC32 */ - -/* - * Things that are specific to 64-bit implementations. - */ -#ifdef CONFIG_PPC64 - -static inline unsigned long perf_ip_adjust(struct pt_regs *regs) -{ - unsigned long mmcra = regs->dsisr; - - if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { - unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; - if (slot > 1) - return 4 * (slot - 1); - } - return 0; -} - -/* - * The user wants a data address recorded. - * If we're not doing instruction sampling, give them the SDAR - * (sampled data address). If we are doing instruction sampling, then - * only give them the SDAR if it corresponds to the instruction - * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC - * bit in MMCRA. - */ -static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) -{ - unsigned long mmcra = regs->dsisr; - unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? - POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; - - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) - *addrp = mfspr(SPRN_SDAR); -} - -static inline u32 perf_get_misc_flags(struct pt_regs *regs) -{ - unsigned long mmcra = regs->dsisr; - - if (TRAP(regs) != 0xf00) - return 0; /* not a PMU interrupt */ - - if (ppmu->flags & PPMU_ALT_SIPR) { - if (mmcra & POWER6_MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & POWER6_MMCRA_SIPR) ? - PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL; - } - if (mmcra & MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; -} - -/* - * Overload regs->dsisr to store MMCRA so we only need to read it once - * on each interrupt. - */ -static inline void perf_read_regs(struct pt_regs *regs) -{ - regs->dsisr = mfspr(SPRN_MMCRA); -} - -/* - * If interrupts were soft-disabled when a PMU interrupt occurs, treat - * it as an NMI. - */ -static inline int perf_intr_is_nmi(struct pt_regs *regs) -{ - return !regs->softe; -} - -#endif /* CONFIG_PPC64 */ - -static void perf_counter_interrupt(struct pt_regs *regs); - -void perf_counter_print_debug(void) -{ -} - -/* - * Read one performance monitor counter (PMC). - */ -static unsigned long read_pmc(int idx) -{ - unsigned long val; - - switch (idx) { - case 1: - val = mfspr(SPRN_PMC1); - break; - case 2: - val = mfspr(SPRN_PMC2); - break; - case 3: - val = mfspr(SPRN_PMC3); - break; - case 4: - val = mfspr(SPRN_PMC4); - break; - case 5: - val = mfspr(SPRN_PMC5); - break; - case 6: - val = mfspr(SPRN_PMC6); - break; -#ifdef CONFIG_PPC64 - case 7: - val = mfspr(SPRN_PMC7); - break; - case 8: - val = mfspr(SPRN_PMC8); - break; -#endif /* CONFIG_PPC64 */ - default: - printk(KERN_ERR "oops trying to read PMC%d\n", idx); - val = 0; - } - return val; -} - -/* - * Write one PMC. - */ -static void write_pmc(int idx, unsigned long val) -{ - switch (idx) { - case 1: - mtspr(SPRN_PMC1, val); - break; - case 2: - mtspr(SPRN_PMC2, val); - break; - case 3: - mtspr(SPRN_PMC3, val); - break; - case 4: - mtspr(SPRN_PMC4, val); - break; - case 5: - mtspr(SPRN_PMC5, val); - break; - case 6: - mtspr(SPRN_PMC6, val); - break; -#ifdef CONFIG_PPC64 - case 7: - mtspr(SPRN_PMC7, val); - break; - case 8: - mtspr(SPRN_PMC8, val); - break; -#endif /* CONFIG_PPC64 */ - default: - printk(KERN_ERR "oops trying to write PMC%d\n", idx); - } -} - -/* - * Check if a set of events can all go on the PMU at once. - * If they can't, this will look at alternative codes for the events - * and see if any combination of alternative codes is feasible. - * The feasible set is returned in event[]. - */ -static int power_check_constraints(struct cpu_hw_counters *cpuhw, - u64 event[], unsigned int cflags[], - int n_ev) -{ - unsigned long mask, value, nv; - unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS]; - int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS]; - int i, j; - unsigned long addf = ppmu->add_fields; - unsigned long tadd = ppmu->test_adder; - - if (n_ev > ppmu->n_counter) - return -1; - - /* First see if the events will go on as-is */ - for (i = 0; i < n_ev; ++i) { - if ((cflags[i] & PPMU_LIMITED_PMC_REQD) - && !ppmu->limited_pmc_event(event[i])) { - ppmu->get_alternatives(event[i], cflags[i], - cpuhw->alternatives[i]); - event[i] = cpuhw->alternatives[i][0]; - } - if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0], - &cpuhw->avalues[i][0])) - return -1; - } - value = mask = 0; - for (i = 0; i < n_ev; ++i) { - nv = (value | cpuhw->avalues[i][0]) + - (value & cpuhw->avalues[i][0] & addf); - if ((((nv + tadd) ^ value) & mask) != 0 || - (((nv + tadd) ^ cpuhw->avalues[i][0]) & - cpuhw->amasks[i][0]) != 0) - break; - value = nv; - mask |= cpuhw->amasks[i][0]; - } - if (i == n_ev) - return 0; /* all OK */ - - /* doesn't work, gather alternatives... */ - if (!ppmu->get_alternatives) - return -1; - for (i = 0; i < n_ev; ++i) { - choice[i] = 0; - n_alt[i] = ppmu->get_alternatives(event[i], cflags[i], - cpuhw->alternatives[i]); - for (j = 1; j < n_alt[i]; ++j) - ppmu->get_constraint(cpuhw->alternatives[i][j], - &cpuhw->amasks[i][j], - &cpuhw->avalues[i][j]); - } - - /* enumerate all possibilities and see if any will work */ - i = 0; - j = -1; - value = mask = nv = 0; - while (i < n_ev) { - if (j >= 0) { - /* we're backtracking, restore context */ - value = svalues[i]; - mask = smasks[i]; - j = choice[i]; - } - /* - * See if any alternative k for event i, - * where k > j, will satisfy the constraints. - */ - while (++j < n_alt[i]) { - nv = (value | cpuhw->avalues[i][j]) + - (value & cpuhw->avalues[i][j] & addf); - if ((((nv + tadd) ^ value) & mask) == 0 && - (((nv + tadd) ^ cpuhw->avalues[i][j]) - & cpuhw->amasks[i][j]) == 0) - break; - } - if (j >= n_alt[i]) { - /* - * No feasible alternative, backtrack - * to event i-1 and continue enumerating its - * alternatives from where we got up to. - */ - if (--i < 0) - return -1; - } else { - /* - * Found a feasible alternative for event i, - * remember where we got up to with this event, - * go on to the next event, and start with - * the first alternative for it. - */ - choice[i] = j; - svalues[i] = value; - smasks[i] = mask; - value = nv; - mask |= cpuhw->amasks[i][j]; - ++i; - j = -1; - } - } - - /* OK, we have a feasible combination, tell the caller the solution */ - for (i = 0; i < n_ev; ++i) - event[i] = cpuhw->alternatives[i][choice[i]]; - return 0; -} - -/* - * Check if newly-added counters have consistent settings for - * exclude_{user,kernel,hv} with each other and any previously - * added counters. - */ -static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], - int n_prev, int n_new) -{ - int eu = 0, ek = 0, eh = 0; - int i, n, first; - struct perf_counter *counter; - - n = n_prev + n_new; - if (n <= 1) - return 0; - - first = 1; - for (i = 0; i < n; ++i) { - if (cflags[i] & PPMU_LIMITED_PMC_OK) { - cflags[i] &= ~PPMU_LIMITED_PMC_REQD; - continue; - } - counter = ctrs[i]; - if (first) { - eu = counter->attr.exclude_user; - ek = counter->attr.exclude_kernel; - eh = counter->attr.exclude_hv; - first = 0; - } else if (counter->attr.exclude_user != eu || - counter->attr.exclude_kernel != ek || - counter->attr.exclude_hv != eh) { - return -EAGAIN; - } - } - - if (eu || ek || eh) - for (i = 0; i < n; ++i) - if (cflags[i] & PPMU_LIMITED_PMC_OK) - cflags[i] |= PPMU_LIMITED_PMC_REQD; - - return 0; -} - -static void power_pmu_read(struct perf_counter *counter) -{ - s64 val, delta, prev; - - if (!counter->hw.idx) - return; - /* - * Performance monitor interrupts come even when interrupts - * are soft-disabled, as long as interrupts are hard-enabled. - * Therefore we treat them like NMIs. - */ - do { - prev = atomic64_read(&counter->hw.prev_count); - barrier(); - val = read_pmc(counter->hw.idx); - } while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev); - - /* The counters are only 32 bits wide */ - delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); - atomic64_sub(delta, &counter->hw.period_left); -} - -/* - * On some machines, PMC5 and PMC6 can't be written, don't respect - * the freeze conditions, and don't generate interrupts. This tells - * us if `counter' is using such a PMC. - */ -static int is_limited_pmc(int pmcnum) -{ - return (ppmu->flags & PPMU_LIMITED_PMC5_6) - && (pmcnum == 5 || pmcnum == 6); -} - -static void freeze_limited_counters(struct cpu_hw_counters *cpuhw, - unsigned long pmc5, unsigned long pmc6) -{ - struct perf_counter *counter; - u64 val, prev, delta; - int i; - - for (i = 0; i < cpuhw->n_limited; ++i) { - counter = cpuhw->limited_counter[i]; - if (!counter->hw.idx) - continue; - val = (counter->hw.idx == 5) ? pmc5 : pmc6; - prev = atomic64_read(&counter->hw.prev_count); - counter->hw.idx = 0; - delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); - } -} - -static void thaw_limited_counters(struct cpu_hw_counters *cpuhw, - unsigned long pmc5, unsigned long pmc6) -{ - struct perf_counter *counter; - u64 val; - int i; - - for (i = 0; i < cpuhw->n_limited; ++i) { - counter = cpuhw->limited_counter[i]; - counter->hw.idx = cpuhw->limited_hwidx[i]; - val = (counter->hw.idx == 5) ? pmc5 : pmc6; - atomic64_set(&counter->hw.prev_count, val); - perf_counter_update_userpage(counter); - } -} - -/* - * Since limited counters don't respect the freeze conditions, we - * have to read them immediately after freezing or unfreezing the - * other counters. We try to keep the values from the limited - * counters as consistent as possible by keeping the delay (in - * cycles and instructions) between freezing/unfreezing and reading - * the limited counters as small and consistent as possible. - * Therefore, if any limited counters are in use, we read them - * both, and always in the same order, to minimize variability, - * and do it inside the same asm that writes MMCR0. - */ -static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0) -{ - unsigned long pmc5, pmc6; - - if (!cpuhw->n_limited) { - mtspr(SPRN_MMCR0, mmcr0); - return; - } - - /* - * Write MMCR0, then read PMC5 and PMC6 immediately. - * To ensure we don't get a performance monitor interrupt - * between writing MMCR0 and freezing/thawing the limited - * counters, we first write MMCR0 with the counter overflow - * interrupt enable bits turned off. - */ - asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5" - : "=&r" (pmc5), "=&r" (pmc6) - : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)), - "i" (SPRN_MMCR0), - "i" (SPRN_PMC5), "i" (SPRN_PMC6)); - - if (mmcr0 & MMCR0_FC) - freeze_limited_counters(cpuhw, pmc5, pmc6); - else - thaw_limited_counters(cpuhw, pmc5, pmc6); - - /* - * Write the full MMCR0 including the counter overflow interrupt - * enable bits, if necessary. - */ - if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE)) - mtspr(SPRN_MMCR0, mmcr0); -} - -/* - * Disable all counters to prevent PMU interrupts and to allow - * counters to be added or removed. - */ -void hw_perf_disable(void) -{ - struct cpu_hw_counters *cpuhw; - unsigned long flags; - - if (!ppmu) - return; - local_irq_save(flags); - cpuhw = &__get_cpu_var(cpu_hw_counters); - - if (!cpuhw->disabled) { - cpuhw->disabled = 1; - cpuhw->n_added = 0; - - /* - * Check if we ever enabled the PMU on this cpu. - */ - if (!cpuhw->pmcs_enabled) { - ppc_enable_pmcs(); - cpuhw->pmcs_enabled = 1; - } - - /* - * Disable instruction sampling if it was enabled - */ - if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { - mtspr(SPRN_MMCRA, - cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); - mb(); - } - - /* - * Set the 'freeze counters' bit. - * The barrier is to make sure the mtspr has been - * executed and the PMU has frozen the counters - * before we return. - */ - write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC); - mb(); - } - local_irq_restore(flags); -} - -/* - * Re-enable all counters if disable == 0. - * If we were previously disabled and counters were added, then - * put the new config on the PMU. - */ -void hw_perf_enable(void) -{ - struct perf_counter *counter; - struct cpu_hw_counters *cpuhw; - unsigned long flags; - long i; - unsigned long val; - s64 left; - unsigned int hwc_index[MAX_HWCOUNTERS]; - int n_lim; - int idx; - - if (!ppmu) - return; - local_irq_save(flags); - cpuhw = &__get_cpu_var(cpu_hw_counters); - if (!cpuhw->disabled) { - local_irq_restore(flags); - return; - } - cpuhw->disabled = 0; - - /* - * If we didn't change anything, or only removed counters, - * no need to recalculate MMCR* settings and reset the PMCs. - * Just reenable the PMU with the current MMCR* settings - * (possibly updated for removal of counters). - */ - if (!cpuhw->n_added) { - mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); - mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); - if (cpuhw->n_counters == 0) - ppc_set_pmu_inuse(0); - goto out_enable; - } - - /* - * Compute MMCR* values for the new set of counters - */ - if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index, - cpuhw->mmcr)) { - /* shouldn't ever get here */ - printk(KERN_ERR "oops compute_mmcr failed\n"); - goto out; - } - - /* - * Add in MMCR0 freeze bits corresponding to the - * attr.exclude_* bits for the first counter. - * We have already checked that all counters have the - * same values for these bits as the first counter. - */ - counter = cpuhw->counter[0]; - if (counter->attr.exclude_user) - cpuhw->mmcr[0] |= MMCR0_FCP; - if (counter->attr.exclude_kernel) - cpuhw->mmcr[0] |= freeze_counters_kernel; - if (counter->attr.exclude_hv) - cpuhw->mmcr[0] |= MMCR0_FCHV; - - /* - * Write the new configuration to MMCR* with the freeze - * bit set and set the hardware counters to their initial values. - * Then unfreeze the counters. - */ - ppc_set_pmu_inuse(1); - mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); - mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); - mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) - | MMCR0_FC); - - /* - * Read off any pre-existing counters that need to move - * to another PMC. - */ - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) { - power_pmu_read(counter); - write_pmc(counter->hw.idx, 0); - counter->hw.idx = 0; - } - } - - /* - * Initialize the PMCs for all the new and moved counters. - */ - cpuhw->n_limited = n_lim = 0; - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (counter->hw.idx) - continue; - idx = hwc_index[i] + 1; - if (is_limited_pmc(idx)) { - cpuhw->limited_counter[n_lim] = counter; - cpuhw->limited_hwidx[n_lim] = idx; - ++n_lim; - continue; - } - val = 0; - if (counter->hw.sample_period) { - left = atomic64_read(&counter->hw.period_left); - if (left < 0x80000000L) - val = 0x80000000L - left; - } - atomic64_set(&counter->hw.prev_count, val); - counter->hw.idx = idx; - write_pmc(idx, val); - perf_counter_update_userpage(counter); - } - cpuhw->n_limited = n_lim; - cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; - - out_enable: - mb(); - write_mmcr0(cpuhw, cpuhw->mmcr[0]); - - /* - * Enable instruction sampling if necessary - */ - if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { - mb(); - mtspr(SPRN_MMCRA, cpuhw->mmcr[2]); - } - - out: - local_irq_restore(flags); -} - -static int collect_events(struct perf_counter *group, int max_count, - struct perf_counter *ctrs[], u64 *events, - unsigned int *flags) -{ - int n = 0; - struct perf_counter *counter; - - if (!is_software_counter(group)) { - if (n >= max_count) - return -1; - ctrs[n] = group; - flags[n] = group->hw.counter_base; - events[n++] = group->hw.config; - } - list_for_each_entry(counter, &group->sibling_list, list_entry) { - if (!is_software_counter(counter) && - counter->state != PERF_COUNTER_STATE_OFF) { - if (n >= max_count) - return -1; - ctrs[n] = counter; - flags[n] = counter->hw.counter_base; - events[n++] = counter->hw.config; - } - } - return n; -} - -static void counter_sched_in(struct perf_counter *counter, int cpu) -{ - counter->state = PERF_COUNTER_STATE_ACTIVE; - counter->oncpu = cpu; - counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped; - if (is_software_counter(counter)) - counter->pmu->enable(counter); -} - -/* - * Called to enable a whole group of counters. - * Returns 1 if the group was enabled, or -EAGAIN if it could not be. - * Assumes the caller has disabled interrupts and has - * frozen the PMU with hw_perf_save_disable. - */ -int hw_perf_group_sched_in(struct perf_counter *group_leader, - struct perf_cpu_context *cpuctx, - struct perf_counter_context *ctx, int cpu) -{ - struct cpu_hw_counters *cpuhw; - long i, n, n0; - struct perf_counter *sub; - - if (!ppmu) - return 0; - cpuhw = &__get_cpu_var(cpu_hw_counters); - n0 = cpuhw->n_counters; - n = collect_events(group_leader, ppmu->n_counter - n0, - &cpuhw->counter[n0], &cpuhw->events[n0], - &cpuhw->flags[n0]); - if (n < 0) - return -EAGAIN; - if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n)) - return -EAGAIN; - i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0); - if (i < 0) - return -EAGAIN; - cpuhw->n_counters = n0 + n; - cpuhw->n_added += n; - - /* - * OK, this group can go on; update counter states etc., - * and enable any software counters - */ - for (i = n0; i < n0 + n; ++i) - cpuhw->counter[i]->hw.config = cpuhw->events[i]; - cpuctx->active_oncpu += n; - n = 1; - counter_sched_in(group_leader, cpu); - list_for_each_entry(sub, &group_leader->sibling_list, list_entry) { - if (sub->state != PERF_COUNTER_STATE_OFF) { - counter_sched_in(sub, cpu); - ++n; - } - } - ctx->nr_active += n; - - return 1; -} - -/* - * Add a counter to the PMU. - * If all counters are not already frozen, then we disable and - * re-enable the PMU in order to get hw_perf_enable to do the - * actual work of reconfiguring the PMU. - */ -static int power_pmu_enable(struct perf_counter *counter) -{ - struct cpu_hw_counters *cpuhw; - unsigned long flags; - int n0; - int ret = -EAGAIN; - - local_irq_save(flags); - perf_disable(); - - /* - * Add the counter to the list (if there is room) - * and check whether the total set is still feasible. - */ - cpuhw = &__get_cpu_var(cpu_hw_counters); - n0 = cpuhw->n_counters; - if (n0 >= ppmu->n_counter) - goto out; - cpuhw->counter[n0] = counter; - cpuhw->events[n0] = counter->hw.config; - cpuhw->flags[n0] = counter->hw.counter_base; - if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1)) - goto out; - if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1)) - goto out; - - counter->hw.config = cpuhw->events[n0]; - ++cpuhw->n_counters; - ++cpuhw->n_added; - - ret = 0; - out: - perf_enable(); - local_irq_restore(flags); - return ret; -} - -/* - * Remove a counter from the PMU. - */ -static void power_pmu_disable(struct perf_counter *counter) -{ - struct cpu_hw_counters *cpuhw; - long i; - unsigned long flags; - - local_irq_save(flags); - perf_disable(); - - power_pmu_read(counter); - - cpuhw = &__get_cpu_var(cpu_hw_counters); - for (i = 0; i < cpuhw->n_counters; ++i) { - if (counter == cpuhw->counter[i]) { - while (++i < cpuhw->n_counters) - cpuhw->counter[i-1] = cpuhw->counter[i]; - --cpuhw->n_counters; - ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr); - if (counter->hw.idx) { - write_pmc(counter->hw.idx, 0); - counter->hw.idx = 0; - } - perf_counter_update_userpage(counter); - break; - } - } - for (i = 0; i < cpuhw->n_limited; ++i) - if (counter == cpuhw->limited_counter[i]) - break; - if (i < cpuhw->n_limited) { - while (++i < cpuhw->n_limited) { - cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i]; - cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i]; - } - --cpuhw->n_limited; - } - if (cpuhw->n_counters == 0) { - /* disable exceptions if no counters are running */ - cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE); - } - - perf_enable(); - local_irq_restore(flags); -} - -/* - * Re-enable interrupts on a counter after they were throttled - * because they were coming too fast. - */ -static void power_pmu_unthrottle(struct perf_counter *counter) -{ - s64 val, left; - unsigned long flags; - - if (!counter->hw.idx || !counter->hw.sample_period) - return; - local_irq_save(flags); - perf_disable(); - power_pmu_read(counter); - left = counter->hw.sample_period; - counter->hw.last_period = left; - val = 0; - if (left < 0x80000000L) - val = 0x80000000L - left; - write_pmc(counter->hw.idx, val); - atomic64_set(&counter->hw.prev_count, val); - atomic64_set(&counter->hw.period_left, left); - perf_counter_update_userpage(counter); - perf_enable(); - local_irq_restore(flags); -} - -struct pmu power_pmu = { - .enable = power_pmu_enable, - .disable = power_pmu_disable, - .read = power_pmu_read, - .unthrottle = power_pmu_unthrottle, -}; - -/* - * Return 1 if we might be able to put counter on a limited PMC, - * or 0 if not. - * A counter can only go on a limited PMC if it counts something - * that a limited PMC can count, doesn't require interrupts, and - * doesn't exclude any processor mode. - */ -static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev, - unsigned int flags) -{ - int n; - u64 alt[MAX_EVENT_ALTERNATIVES]; - - if (counter->attr.exclude_user - || counter->attr.exclude_kernel - || counter->attr.exclude_hv - || counter->attr.sample_period) - return 0; - - if (ppmu->limited_pmc_event(ev)) - return 1; - - /* - * The requested event isn't on a limited PMC already; - * see if any alternative code goes on a limited PMC. - */ - if (!ppmu->get_alternatives) - return 0; - - flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD; - n = ppmu->get_alternatives(ev, flags, alt); - - return n > 0; -} - -/* - * Find an alternative event that goes on a normal PMC, if possible, - * and return the event code, or 0 if there is no such alternative. - * (Note: event code 0 is "don't count" on all machines.) - */ -static u64 normal_pmc_alternative(u64 ev, unsigned long flags) -{ - u64 alt[MAX_EVENT_ALTERNATIVES]; - int n; - - flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD); - n = ppmu->get_alternatives(ev, flags, alt); - if (!n) - return 0; - return alt[0]; -} - -/* Number of perf_counters counting hardware events */ -static atomic_t num_counters; -/* Used to avoid races in calling reserve/release_pmc_hardware */ -static DEFINE_MUTEX(pmc_reserve_mutex); - -/* - * Release the PMU if this is the last perf_counter. - */ -static void hw_perf_counter_destroy(struct perf_counter *counter) -{ - if (!atomic_add_unless(&num_counters, -1, 1)) { - mutex_lock(&pmc_reserve_mutex); - if (atomic_dec_return(&num_counters) == 0) - release_pmc_hardware(); - mutex_unlock(&pmc_reserve_mutex); - } -} - -/* - * Translate a generic cache event config to a raw event code. - */ -static int hw_perf_cache_event(u64 config, u64 *eventp) -{ - unsigned long type, op, result; - int ev; - - if (!ppmu->cache_events) - return -EINVAL; - - /* unpack config */ - type = config & 0xff; - op = (config >> 8) & 0xff; - result = (config >> 16) & 0xff; - - if (type >= PERF_COUNT_HW_CACHE_MAX || - op >= PERF_COUNT_HW_CACHE_OP_MAX || - result >= PERF_COUNT_HW_CACHE_RESULT_MAX) - return -EINVAL; - - ev = (*ppmu->cache_events)[type][op][result]; - if (ev == 0) - return -EOPNOTSUPP; - if (ev == -1) - return -EINVAL; - *eventp = ev; - return 0; -} - -const struct pmu *hw_perf_counter_init(struct perf_counter *counter) -{ - u64 ev; - unsigned long flags; - struct perf_counter *ctrs[MAX_HWCOUNTERS]; - u64 events[MAX_HWCOUNTERS]; - unsigned int cflags[MAX_HWCOUNTERS]; - int n; - int err; - struct cpu_hw_counters *cpuhw; - - if (!ppmu) - return ERR_PTR(-ENXIO); - switch (counter->attr.type) { - case PERF_TYPE_HARDWARE: - ev = counter->attr.config; - if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) - return ERR_PTR(-EOPNOTSUPP); - ev = ppmu->generic_events[ev]; - break; - case PERF_TYPE_HW_CACHE: - err = hw_perf_cache_event(counter->attr.config, &ev); - if (err) - return ERR_PTR(err); - break; - case PERF_TYPE_RAW: - ev = counter->attr.config; - break; - default: - return ERR_PTR(-EINVAL); - } - counter->hw.config_base = ev; - counter->hw.idx = 0; - - /* - * If we are not running on a hypervisor, force the - * exclude_hv bit to 0 so that we don't care what - * the user set it to. - */ - if (!firmware_has_feature(FW_FEATURE_LPAR)) - counter->attr.exclude_hv = 0; - - /* - * If this is a per-task counter, then we can use - * PM_RUN_* events interchangeably with their non RUN_* - * equivalents, e.g. PM_RUN_CYC instead of PM_CYC. - * XXX we should check if the task is an idle task. - */ - flags = 0; - if (counter->ctx->task) - flags |= PPMU_ONLY_COUNT_RUN; - - /* - * If this machine has limited counters, check whether this - * event could go on a limited counter. - */ - if (ppmu->flags & PPMU_LIMITED_PMC5_6) { - if (can_go_on_limited_pmc(counter, ev, flags)) { - flags |= PPMU_LIMITED_PMC_OK; - } else if (ppmu->limited_pmc_event(ev)) { - /* - * The requested event is on a limited PMC, - * but we can't use a limited PMC; see if any - * alternative goes on a normal PMC. - */ - ev = normal_pmc_alternative(ev, flags); - if (!ev) - return ERR_PTR(-EINVAL); - } - } - - /* - * If this is in a group, check if it can go on with all the - * other hardware counters in the group. We assume the counter - * hasn't been linked into its leader's sibling list at this point. - */ - n = 0; - if (counter->group_leader != counter) { - n = collect_events(counter->group_leader, ppmu->n_counter - 1, - ctrs, events, cflags); - if (n < 0) - return ERR_PTR(-EINVAL); - } - events[n] = ev; - ctrs[n] = counter; - cflags[n] = flags; - if (check_excludes(ctrs, cflags, n, 1)) - return ERR_PTR(-EINVAL); - - cpuhw = &get_cpu_var(cpu_hw_counters); - err = power_check_constraints(cpuhw, events, cflags, n + 1); - put_cpu_var(cpu_hw_counters); - if (err) - return ERR_PTR(-EINVAL); - - counter->hw.config = events[n]; - counter->hw.counter_base = cflags[n]; - counter->hw.last_period = counter->hw.sample_period; - atomic64_set(&counter->hw.period_left, counter->hw.last_period); - - /* - * See if we need to reserve the PMU. - * If no counters are currently in use, then we have to take a - * mutex to ensure that we don't race with another task doing - * reserve_pmc_hardware or release_pmc_hardware. - */ - err = 0; - if (!atomic_inc_not_zero(&num_counters)) { - mutex_lock(&pmc_reserve_mutex); - if (atomic_read(&num_counters) == 0 && - reserve_pmc_hardware(perf_counter_interrupt)) - err = -EBUSY; - else - atomic_inc(&num_counters); - mutex_unlock(&pmc_reserve_mutex); - } - counter->destroy = hw_perf_counter_destroy; - - if (err) - return ERR_PTR(err); - return &power_pmu; -} - -/* - * A counter has overflowed; update its count and record - * things if requested. Note that interrupts are hard-disabled - * here so there is no possibility of being interrupted. - */ -static void record_and_restart(struct perf_counter *counter, unsigned long val, - struct pt_regs *regs, int nmi) -{ - u64 period = counter->hw.sample_period; - s64 prev, delta, left; - int record = 0; - - /* we don't have to worry about interrupts here */ - prev = atomic64_read(&counter->hw.prev_count); - delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &counter->count); - - /* - * See if the total period for this counter has expired, - * and update for the next period. - */ - val = 0; - left = atomic64_read(&counter->hw.period_left) - delta; - if (period) { - if (left <= 0) { - left += period; - if (left <= 0) - left = period; - record = 1; - } - if (left < 0x80000000LL) - val = 0x80000000LL - left; - } - - /* - * Finally record data if requested. - */ - if (record) { - struct perf_sample_data data = { - .addr = 0, - .period = counter->hw.last_period, - }; - - if (counter->attr.sample_type & PERF_SAMPLE_ADDR) - perf_get_data_addr(regs, &data.addr); - - if (perf_counter_overflow(counter, nmi, &data, regs)) { - /* - * Interrupts are coming too fast - throttle them - * by setting the counter to 0, so it will be - * at least 2^30 cycles until the next interrupt - * (assuming each counter counts at most 2 counts - * per cycle). - */ - val = 0; - left = ~0ULL >> 1; - } - } - - write_pmc(counter->hw.idx, val); - atomic64_set(&counter->hw.prev_count, val); - atomic64_set(&counter->hw.period_left, left); - perf_counter_update_userpage(counter); -} - -/* - * Called from generic code to get the misc flags (i.e. processor mode) - * for an event. - */ -unsigned long perf_misc_flags(struct pt_regs *regs) -{ - u32 flags = perf_get_misc_flags(regs); - - if (flags) - return flags; - return user_mode(regs) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; -} - -/* - * Called from generic code to get the instruction pointer - * for an event. - */ -unsigned long perf_instruction_pointer(struct pt_regs *regs) -{ - unsigned long ip; - - if (TRAP(regs) != 0xf00) - return regs->nip; /* not a PMU interrupt */ - - ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs); - return ip; -} - -/* - * Performance monitor interrupt stuff - */ -static void perf_counter_interrupt(struct pt_regs *regs) -{ - int i; - struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); - struct perf_counter *counter; - unsigned long val; - int found = 0; - int nmi; - - if (cpuhw->n_limited) - freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5), - mfspr(SPRN_PMC6)); - - perf_read_regs(regs); - - nmi = perf_intr_is_nmi(regs); - if (nmi) - nmi_enter(); - else - irq_enter(); - - for (i = 0; i < cpuhw->n_counters; ++i) { - counter = cpuhw->counter[i]; - if (!counter->hw.idx || is_limited_pmc(counter->hw.idx)) - continue; - val = read_pmc(counter->hw.idx); - if ((int)val < 0) { - /* counter has overflowed */ - found = 1; - record_and_restart(counter, val, regs, nmi); - } - } - - /* - * In case we didn't find and reset the counter that caused - * the interrupt, scan all counters and reset any that are - * negative, to avoid getting continual interrupts. - * Any that we processed in the previous loop will not be negative. - */ - if (!found) { - for (i = 0; i < ppmu->n_counter; ++i) { - if (is_limited_pmc(i + 1)) - continue; - val = read_pmc(i + 1); - if ((int)val < 0) - write_pmc(i + 1, 0); - } - } - - /* - * Reset MMCR0 to its normal value. This will set PMXE and - * clear FC (freeze counters) and PMAO (perf mon alert occurred) - * and thus allow interrupts to occur again. - * XXX might want to use MSR.PM to keep the counters frozen until - * we get back out of this interrupt. - */ - write_mmcr0(cpuhw, cpuhw->mmcr[0]); - - if (nmi) - nmi_exit(); - else - irq_exit(); -} - -void hw_perf_counter_setup(int cpu) -{ - struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu); - - if (!ppmu) - return; - memset(cpuhw, 0, sizeof(*cpuhw)); - cpuhw->mmcr[0] = MMCR0_FC; -} - -int register_power_pmu(struct power_pmu *pmu) -{ - if (ppmu) - return -EBUSY; /* something's already registered */ - - ppmu = pmu; - pr_info("%s performance monitor hardware support registered\n", - pmu->name); - -#ifdef MSR_HV - /* - * Use FCHV to ignore kernel events if MSR.HV is set. - */ - if (mfmsr() & MSR_HV) - freeze_counters_kernel = MMCR0_FCHV; -#endif /* CONFIG_PPC64 */ - - return 0; -} diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c new file mode 100644 index 000000000000..c98321fcb459 --- /dev/null +++ b/arch/powerpc/kernel/perf_event.c @@ -0,0 +1,1315 @@ +/* + * Performance event support - powerpc architecture code + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct cpu_hw_events { + int n_events; + int n_percpu; + int disabled; + int n_added; + int n_limited; + u8 pmcs_enabled; + struct perf_event *event[MAX_HWEVENTS]; + u64 events[MAX_HWEVENTS]; + unsigned int flags[MAX_HWEVENTS]; + unsigned long mmcr[3]; + struct perf_event *limited_event[MAX_LIMITED_HWEVENTS]; + u8 limited_hwidx[MAX_LIMITED_HWEVENTS]; + u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; + unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; + unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES]; +}; +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +struct power_pmu *ppmu; + +/* + * Normally, to ignore kernel events we set the FCS (freeze events + * in supervisor mode) bit in MMCR0, but if the kernel runs with the + * hypervisor bit set in the MSR, or if we are running on a processor + * where the hypervisor bit is forced to 1 (as on Apple G5 processors), + * then we need to use the FCHV bit to ignore kernel events. + */ +static unsigned int freeze_events_kernel = MMCR0_FCS; + +/* + * 32-bit doesn't have MMCRA but does have an MMCR2, + * and a few other names are different. + */ +#ifdef CONFIG_PPC32 + +#define MMCR0_FCHV 0 +#define MMCR0_PMCjCE MMCR0_PMCnCE + +#define SPRN_MMCRA SPRN_MMCR2 +#define MMCRA_SAMPLE_ENABLE 0 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_read_regs(struct pt_regs *regs) { } +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return 0; +} + +#endif /* CONFIG_PPC32 */ + +/* + * Things that are specific to 64-bit implementations. + */ +#ifdef CONFIG_PPC64 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { + unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; + if (slot > 1) + return 4 * (slot - 1); + } + return 0; +} + +/* + * The user wants a data address recorded. + * If we're not doing instruction sampling, give them the SDAR + * (sampled data address). If we are doing instruction sampling, then + * only give them the SDAR if it corresponds to the instruction + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC + * bit in MMCRA. + */ +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) +{ + unsigned long mmcra = regs->dsisr; + unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? + POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + *addrp = mfspr(SPRN_SDAR); +} + +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if (TRAP(regs) != 0xf00) + return 0; /* not a PMU interrupt */ + + if (ppmu->flags & PPMU_ALT_SIPR) { + if (mmcra & POWER6_MMCRA_SIHV) + return PERF_RECORD_MISC_HYPERVISOR; + return (mmcra & POWER6_MMCRA_SIPR) ? + PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL; + } + if (mmcra & MMCRA_SIHV) + return PERF_RECORD_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER : + PERF_RECORD_MISC_KERNEL; +} + +/* + * Overload regs->dsisr to store MMCRA so we only need to read it once + * on each interrupt. + */ +static inline void perf_read_regs(struct pt_regs *regs) +{ + regs->dsisr = mfspr(SPRN_MMCRA); +} + +/* + * If interrupts were soft-disabled when a PMU interrupt occurs, treat + * it as an NMI. + */ +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return !regs->softe; +} + +#endif /* CONFIG_PPC64 */ + +static void perf_event_interrupt(struct pt_regs *regs); + +void perf_event_print_debug(void) +{ +} + +/* + * Read one performance monitor event (PMC). + */ +static unsigned long read_pmc(int idx) +{ + unsigned long val; + + switch (idx) { + case 1: + val = mfspr(SPRN_PMC1); + break; + case 2: + val = mfspr(SPRN_PMC2); + break; + case 3: + val = mfspr(SPRN_PMC3); + break; + case 4: + val = mfspr(SPRN_PMC4); + break; + case 5: + val = mfspr(SPRN_PMC5); + break; + case 6: + val = mfspr(SPRN_PMC6); + break; +#ifdef CONFIG_PPC64 + case 7: + val = mfspr(SPRN_PMC7); + break; + case 8: + val = mfspr(SPRN_PMC8); + break; +#endif /* CONFIG_PPC64 */ + default: + printk(KERN_ERR "oops trying to read PMC%d\n", idx); + val = 0; + } + return val; +} + +/* + * Write one PMC. + */ +static void write_pmc(int idx, unsigned long val) +{ + switch (idx) { + case 1: + mtspr(SPRN_PMC1, val); + break; + case 2: + mtspr(SPRN_PMC2, val); + break; + case 3: + mtspr(SPRN_PMC3, val); + break; + case 4: + mtspr(SPRN_PMC4, val); + break; + case 5: + mtspr(SPRN_PMC5, val); + break; + case 6: + mtspr(SPRN_PMC6, val); + break; +#ifdef CONFIG_PPC64 + case 7: + mtspr(SPRN_PMC7, val); + break; + case 8: + mtspr(SPRN_PMC8, val); + break; +#endif /* CONFIG_PPC64 */ + default: + printk(KERN_ERR "oops trying to write PMC%d\n", idx); + } +} + +/* + * Check if a set of events can all go on the PMU at once. + * If they can't, this will look at alternative codes for the events + * and see if any combination of alternative codes is feasible. + * The feasible set is returned in event_id[]. + */ +static int power_check_constraints(struct cpu_hw_events *cpuhw, + u64 event_id[], unsigned int cflags[], + int n_ev) +{ + unsigned long mask, value, nv; + unsigned long smasks[MAX_HWEVENTS], svalues[MAX_HWEVENTS]; + int n_alt[MAX_HWEVENTS], choice[MAX_HWEVENTS]; + int i, j; + unsigned long addf = ppmu->add_fields; + unsigned long tadd = ppmu->test_adder; + + if (n_ev > ppmu->n_event) + return -1; + + /* First see if the events will go on as-is */ + for (i = 0; i < n_ev; ++i) { + if ((cflags[i] & PPMU_LIMITED_PMC_REQD) + && !ppmu->limited_pmc_event(event_id[i])) { + ppmu->get_alternatives(event_id[i], cflags[i], + cpuhw->alternatives[i]); + event_id[i] = cpuhw->alternatives[i][0]; + } + if (ppmu->get_constraint(event_id[i], &cpuhw->amasks[i][0], + &cpuhw->avalues[i][0])) + return -1; + } + value = mask = 0; + for (i = 0; i < n_ev; ++i) { + nv = (value | cpuhw->avalues[i][0]) + + (value & cpuhw->avalues[i][0] & addf); + if ((((nv + tadd) ^ value) & mask) != 0 || + (((nv + tadd) ^ cpuhw->avalues[i][0]) & + cpuhw->amasks[i][0]) != 0) + break; + value = nv; + mask |= cpuhw->amasks[i][0]; + } + if (i == n_ev) + return 0; /* all OK */ + + /* doesn't work, gather alternatives... */ + if (!ppmu->get_alternatives) + return -1; + for (i = 0; i < n_ev; ++i) { + choice[i] = 0; + n_alt[i] = ppmu->get_alternatives(event_id[i], cflags[i], + cpuhw->alternatives[i]); + for (j = 1; j < n_alt[i]; ++j) + ppmu->get_constraint(cpuhw->alternatives[i][j], + &cpuhw->amasks[i][j], + &cpuhw->avalues[i][j]); + } + + /* enumerate all possibilities and see if any will work */ + i = 0; + j = -1; + value = mask = nv = 0; + while (i < n_ev) { + if (j >= 0) { + /* we're backtracking, restore context */ + value = svalues[i]; + mask = smasks[i]; + j = choice[i]; + } + /* + * See if any alternative k for event_id i, + * where k > j, will satisfy the constraints. + */ + while (++j < n_alt[i]) { + nv = (value | cpuhw->avalues[i][j]) + + (value & cpuhw->avalues[i][j] & addf); + if ((((nv + tadd) ^ value) & mask) == 0 && + (((nv + tadd) ^ cpuhw->avalues[i][j]) + & cpuhw->amasks[i][j]) == 0) + break; + } + if (j >= n_alt[i]) { + /* + * No feasible alternative, backtrack + * to event_id i-1 and continue enumerating its + * alternatives from where we got up to. + */ + if (--i < 0) + return -1; + } else { + /* + * Found a feasible alternative for event_id i, + * remember where we got up to with this event_id, + * go on to the next event_id, and start with + * the first alternative for it. + */ + choice[i] = j; + svalues[i] = value; + smasks[i] = mask; + value = nv; + mask |= cpuhw->amasks[i][j]; + ++i; + j = -1; + } + } + + /* OK, we have a feasible combination, tell the caller the solution */ + for (i = 0; i < n_ev; ++i) + event_id[i] = cpuhw->alternatives[i][choice[i]]; + return 0; +} + +/* + * Check if newly-added events have consistent settings for + * exclude_{user,kernel,hv} with each other and any previously + * added events. + */ +static int check_excludes(struct perf_event **ctrs, unsigned int cflags[], + int n_prev, int n_new) +{ + int eu = 0, ek = 0, eh = 0; + int i, n, first; + struct perf_event *event; + + n = n_prev + n_new; + if (n <= 1) + return 0; + + first = 1; + for (i = 0; i < n; ++i) { + if (cflags[i] & PPMU_LIMITED_PMC_OK) { + cflags[i] &= ~PPMU_LIMITED_PMC_REQD; + continue; + } + event = ctrs[i]; + if (first) { + eu = event->attr.exclude_user; + ek = event->attr.exclude_kernel; + eh = event->attr.exclude_hv; + first = 0; + } else if (event->attr.exclude_user != eu || + event->attr.exclude_kernel != ek || + event->attr.exclude_hv != eh) { + return -EAGAIN; + } + } + + if (eu || ek || eh) + for (i = 0; i < n; ++i) + if (cflags[i] & PPMU_LIMITED_PMC_OK) + cflags[i] |= PPMU_LIMITED_PMC_REQD; + + return 0; +} + +static void power_pmu_read(struct perf_event *event) +{ + s64 val, delta, prev; + + if (!event->hw.idx) + return; + /* + * Performance monitor interrupts come even when interrupts + * are soft-disabled, as long as interrupts are hard-enabled. + * Therefore we treat them like NMIs. + */ + do { + prev = atomic64_read(&event->hw.prev_count); + barrier(); + val = read_pmc(event->hw.idx); + } while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev); + + /* The events are only 32 bits wide */ + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &event->count); + atomic64_sub(delta, &event->hw.period_left); +} + +/* + * On some machines, PMC5 and PMC6 can't be written, don't respect + * the freeze conditions, and don't generate interrupts. This tells + * us if `event' is using such a PMC. + */ +static int is_limited_pmc(int pmcnum) +{ + return (ppmu->flags & PPMU_LIMITED_PMC5_6) + && (pmcnum == 5 || pmcnum == 6); +} + +static void freeze_limited_events(struct cpu_hw_events *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_event *event; + u64 val, prev, delta; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + event = cpuhw->limited_event[i]; + if (!event->hw.idx) + continue; + val = (event->hw.idx == 5) ? pmc5 : pmc6; + prev = atomic64_read(&event->hw.prev_count); + event->hw.idx = 0; + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &event->count); + } +} + +static void thaw_limited_events(struct cpu_hw_events *cpuhw, + unsigned long pmc5, unsigned long pmc6) +{ + struct perf_event *event; + u64 val; + int i; + + for (i = 0; i < cpuhw->n_limited; ++i) { + event = cpuhw->limited_event[i]; + event->hw.idx = cpuhw->limited_hwidx[i]; + val = (event->hw.idx == 5) ? pmc5 : pmc6; + atomic64_set(&event->hw.prev_count, val); + perf_event_update_userpage(event); + } +} + +/* + * Since limited events don't respect the freeze conditions, we + * have to read them immediately after freezing or unfreezing the + * other events. We try to keep the values from the limited + * events as consistent as possible by keeping the delay (in + * cycles and instructions) between freezing/unfreezing and reading + * the limited events as small and consistent as possible. + * Therefore, if any limited events are in use, we read them + * both, and always in the same order, to minimize variability, + * and do it inside the same asm that writes MMCR0. + */ +static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0) +{ + unsigned long pmc5, pmc6; + + if (!cpuhw->n_limited) { + mtspr(SPRN_MMCR0, mmcr0); + return; + } + + /* + * Write MMCR0, then read PMC5 and PMC6 immediately. + * To ensure we don't get a performance monitor interrupt + * between writing MMCR0 and freezing/thawing the limited + * events, we first write MMCR0 with the event overflow + * interrupt enable bits turned off. + */ + asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5" + : "=&r" (pmc5), "=&r" (pmc6) + : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)), + "i" (SPRN_MMCR0), + "i" (SPRN_PMC5), "i" (SPRN_PMC6)); + + if (mmcr0 & MMCR0_FC) + freeze_limited_events(cpuhw, pmc5, pmc6); + else + thaw_limited_events(cpuhw, pmc5, pmc6); + + /* + * Write the full MMCR0 including the event overflow interrupt + * enable bits, if necessary. + */ + if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE)) + mtspr(SPRN_MMCR0, mmcr0); +} + +/* + * Disable all events to prevent PMU interrupts and to allow + * events to be added or removed. + */ +void hw_perf_disable(void) +{ + struct cpu_hw_events *cpuhw; + unsigned long flags; + + if (!ppmu) + return; + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!cpuhw->disabled) { + cpuhw->disabled = 1; + cpuhw->n_added = 0; + + /* + * Check if we ever enabled the PMU on this cpu. + */ + if (!cpuhw->pmcs_enabled) { + ppc_enable_pmcs(); + cpuhw->pmcs_enabled = 1; + } + + /* + * Disable instruction sampling if it was enabled + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mtspr(SPRN_MMCRA, + cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mb(); + } + + /* + * Set the 'freeze events' bit. + * The barrier is to make sure the mtspr has been + * executed and the PMU has frozen the events + * before we return. + */ + write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC); + mb(); + } + local_irq_restore(flags); +} + +/* + * Re-enable all events if disable == 0. + * If we were previously disabled and events were added, then + * put the new config on the PMU. + */ +void hw_perf_enable(void) +{ + struct perf_event *event; + struct cpu_hw_events *cpuhw; + unsigned long flags; + long i; + unsigned long val; + s64 left; + unsigned int hwc_index[MAX_HWEVENTS]; + int n_lim; + int idx; + + if (!ppmu) + return; + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_events); + if (!cpuhw->disabled) { + local_irq_restore(flags); + return; + } + cpuhw->disabled = 0; + + /* + * If we didn't change anything, or only removed events, + * no need to recalculate MMCR* settings and reset the PMCs. + * Just reenable the PMU with the current MMCR* settings + * (possibly updated for removal of events). + */ + if (!cpuhw->n_added) { + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + if (cpuhw->n_events == 0) + ppc_set_pmu_inuse(0); + goto out_enable; + } + + /* + * Compute MMCR* values for the new set of events + */ + if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index, + cpuhw->mmcr)) { + /* shouldn't ever get here */ + printk(KERN_ERR "oops compute_mmcr failed\n"); + goto out; + } + + /* + * Add in MMCR0 freeze bits corresponding to the + * attr.exclude_* bits for the first event. + * We have already checked that all events have the + * same values for these bits as the first event. + */ + event = cpuhw->event[0]; + if (event->attr.exclude_user) + cpuhw->mmcr[0] |= MMCR0_FCP; + if (event->attr.exclude_kernel) + cpuhw->mmcr[0] |= freeze_events_kernel; + if (event->attr.exclude_hv) + cpuhw->mmcr[0] |= MMCR0_FCHV; + + /* + * Write the new configuration to MMCR* with the freeze + * bit set and set the hardware events to their initial values. + * Then unfreeze the events. + */ + ppc_set_pmu_inuse(1); + mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); + mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); + mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) + | MMCR0_FC); + + /* + * Read off any pre-existing events that need to move + * to another PMC. + */ + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (event->hw.idx && event->hw.idx != hwc_index[i] + 1) { + power_pmu_read(event); + write_pmc(event->hw.idx, 0); + event->hw.idx = 0; + } + } + + /* + * Initialize the PMCs for all the new and moved events. + */ + cpuhw->n_limited = n_lim = 0; + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (event->hw.idx) + continue; + idx = hwc_index[i] + 1; + if (is_limited_pmc(idx)) { + cpuhw->limited_event[n_lim] = event; + cpuhw->limited_hwidx[n_lim] = idx; + ++n_lim; + continue; + } + val = 0; + if (event->hw.sample_period) { + left = atomic64_read(&event->hw.period_left); + if (left < 0x80000000L) + val = 0x80000000L - left; + } + atomic64_set(&event->hw.prev_count, val); + event->hw.idx = idx; + write_pmc(idx, val); + perf_event_update_userpage(event); + } + cpuhw->n_limited = n_lim; + cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE; + + out_enable: + mb(); + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + /* + * Enable instruction sampling if necessary + */ + if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) { + mb(); + mtspr(SPRN_MMCRA, cpuhw->mmcr[2]); + } + + out: + local_irq_restore(flags); +} + +static int collect_events(struct perf_event *group, int max_count, + struct perf_event *ctrs[], u64 *events, + unsigned int *flags) +{ + int n = 0; + struct perf_event *event; + + if (!is_software_event(group)) { + if (n >= max_count) + return -1; + ctrs[n] = group; + flags[n] = group->hw.event_base; + events[n++] = group->hw.config; + } + list_for_each_entry(event, &group->sibling_list, list_entry) { + if (!is_software_event(event) && + event->state != PERF_EVENT_STATE_OFF) { + if (n >= max_count) + return -1; + ctrs[n] = event; + flags[n] = event->hw.event_base; + events[n++] = event->hw.config; + } + } + return n; +} + +static void event_sched_in(struct perf_event *event, int cpu) +{ + event->state = PERF_EVENT_STATE_ACTIVE; + event->oncpu = cpu; + event->tstamp_running += event->ctx->time - event->tstamp_stopped; + if (is_software_event(event)) + event->pmu->enable(event); +} + +/* + * Called to enable a whole group of events. + * Returns 1 if the group was enabled, or -EAGAIN if it could not be. + * Assumes the caller has disabled interrupts and has + * frozen the PMU with hw_perf_save_disable. + */ +int hw_perf_group_sched_in(struct perf_event *group_leader, + struct perf_cpu_context *cpuctx, + struct perf_event_context *ctx, int cpu) +{ + struct cpu_hw_events *cpuhw; + long i, n, n0; + struct perf_event *sub; + + if (!ppmu) + return 0; + cpuhw = &__get_cpu_var(cpu_hw_events); + n0 = cpuhw->n_events; + n = collect_events(group_leader, ppmu->n_event - n0, + &cpuhw->event[n0], &cpuhw->events[n0], + &cpuhw->flags[n0]); + if (n < 0) + return -EAGAIN; + if (check_excludes(cpuhw->event, cpuhw->flags, n0, n)) + return -EAGAIN; + i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0); + if (i < 0) + return -EAGAIN; + cpuhw->n_events = n0 + n; + cpuhw->n_added += n; + + /* + * OK, this group can go on; update event states etc., + * and enable any software events + */ + for (i = n0; i < n0 + n; ++i) + cpuhw->event[i]->hw.config = cpuhw->events[i]; + cpuctx->active_oncpu += n; + n = 1; + event_sched_in(group_leader, cpu); + list_for_each_entry(sub, &group_leader->sibling_list, list_entry) { + if (sub->state != PERF_EVENT_STATE_OFF) { + event_sched_in(sub, cpu); + ++n; + } + } + ctx->nr_active += n; + + return 1; +} + +/* + * Add a event to the PMU. + * If all events are not already frozen, then we disable and + * re-enable the PMU in order to get hw_perf_enable to do the + * actual work of reconfiguring the PMU. + */ +static int power_pmu_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw; + unsigned long flags; + int n0; + int ret = -EAGAIN; + + local_irq_save(flags); + perf_disable(); + + /* + * Add the event to the list (if there is room) + * and check whether the total set is still feasible. + */ + cpuhw = &__get_cpu_var(cpu_hw_events); + n0 = cpuhw->n_events; + if (n0 >= ppmu->n_event) + goto out; + cpuhw->event[n0] = event; + cpuhw->events[n0] = event->hw.config; + cpuhw->flags[n0] = event->hw.event_base; + if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1)) + goto out; + if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1)) + goto out; + + event->hw.config = cpuhw->events[n0]; + ++cpuhw->n_events; + ++cpuhw->n_added; + + ret = 0; + out: + perf_enable(); + local_irq_restore(flags); + return ret; +} + +/* + * Remove a event from the PMU. + */ +static void power_pmu_disable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw; + long i; + unsigned long flags; + + local_irq_save(flags); + perf_disable(); + + power_pmu_read(event); + + cpuhw = &__get_cpu_var(cpu_hw_events); + for (i = 0; i < cpuhw->n_events; ++i) { + if (event == cpuhw->event[i]) { + while (++i < cpuhw->n_events) + cpuhw->event[i-1] = cpuhw->event[i]; + --cpuhw->n_events; + ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr); + if (event->hw.idx) { + write_pmc(event->hw.idx, 0); + event->hw.idx = 0; + } + perf_event_update_userpage(event); + break; + } + } + for (i = 0; i < cpuhw->n_limited; ++i) + if (event == cpuhw->limited_event[i]) + break; + if (i < cpuhw->n_limited) { + while (++i < cpuhw->n_limited) { + cpuhw->limited_event[i-1] = cpuhw->limited_event[i]; + cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i]; + } + --cpuhw->n_limited; + } + if (cpuhw->n_events == 0) { + /* disable exceptions if no events are running */ + cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE); + } + + perf_enable(); + local_irq_restore(flags); +} + +/* + * Re-enable interrupts on a event after they were throttled + * because they were coming too fast. + */ +static void power_pmu_unthrottle(struct perf_event *event) +{ + s64 val, left; + unsigned long flags; + + if (!event->hw.idx || !event->hw.sample_period) + return; + local_irq_save(flags); + perf_disable(); + power_pmu_read(event); + left = event->hw.sample_period; + event->hw.last_period = left; + val = 0; + if (left < 0x80000000L) + val = 0x80000000L - left; + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); + perf_enable(); + local_irq_restore(flags); +} + +struct pmu power_pmu = { + .enable = power_pmu_enable, + .disable = power_pmu_disable, + .read = power_pmu_read, + .unthrottle = power_pmu_unthrottle, +}; + +/* + * Return 1 if we might be able to put event on a limited PMC, + * or 0 if not. + * A event can only go on a limited PMC if it counts something + * that a limited PMC can count, doesn't require interrupts, and + * doesn't exclude any processor mode. + */ +static int can_go_on_limited_pmc(struct perf_event *event, u64 ev, + unsigned int flags) +{ + int n; + u64 alt[MAX_EVENT_ALTERNATIVES]; + + if (event->attr.exclude_user + || event->attr.exclude_kernel + || event->attr.exclude_hv + || event->attr.sample_period) + return 0; + + if (ppmu->limited_pmc_event(ev)) + return 1; + + /* + * The requested event_id isn't on a limited PMC already; + * see if any alternative code goes on a limited PMC. + */ + if (!ppmu->get_alternatives) + return 0; + + flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD; + n = ppmu->get_alternatives(ev, flags, alt); + + return n > 0; +} + +/* + * Find an alternative event_id that goes on a normal PMC, if possible, + * and return the event_id code, or 0 if there is no such alternative. + * (Note: event_id code 0 is "don't count" on all machines.) + */ +static u64 normal_pmc_alternative(u64 ev, unsigned long flags) +{ + u64 alt[MAX_EVENT_ALTERNATIVES]; + int n; + + flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD); + n = ppmu->get_alternatives(ev, flags, alt); + if (!n) + return 0; + return alt[0]; +} + +/* Number of perf_events counting hardware events */ +static atomic_t num_events; +/* Used to avoid races in calling reserve/release_pmc_hardware */ +static DEFINE_MUTEX(pmc_reserve_mutex); + +/* + * Release the PMU if this is the last perf_event. + */ +static void hw_perf_event_destroy(struct perf_event *event) +{ + if (!atomic_add_unless(&num_events, -1, 1)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_dec_return(&num_events) == 0) + release_pmc_hardware(); + mutex_unlock(&pmc_reserve_mutex); + } +} + +/* + * Translate a generic cache event_id config to a raw event_id code. + */ +static int hw_perf_cache_event(u64 config, u64 *eventp) +{ + unsigned long type, op, result; + int ev; + + if (!ppmu->cache_events) + return -EINVAL; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = (*ppmu->cache_events)[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *eventp = ev; + return 0; +} + +const struct pmu *hw_perf_event_init(struct perf_event *event) +{ + u64 ev; + unsigned long flags; + struct perf_event *ctrs[MAX_HWEVENTS]; + u64 events[MAX_HWEVENTS]; + unsigned int cflags[MAX_HWEVENTS]; + int n; + int err; + struct cpu_hw_events *cpuhw; + + if (!ppmu) + return ERR_PTR(-ENXIO); + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + ev = event->attr.config; + if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) + return ERR_PTR(-EOPNOTSUPP); + ev = ppmu->generic_events[ev]; + break; + case PERF_TYPE_HW_CACHE: + err = hw_perf_cache_event(event->attr.config, &ev); + if (err) + return ERR_PTR(err); + break; + case PERF_TYPE_RAW: + ev = event->attr.config; + break; + default: + return ERR_PTR(-EINVAL); + } + event->hw.config_base = ev; + event->hw.idx = 0; + + /* + * If we are not running on a hypervisor, force the + * exclude_hv bit to 0 so that we don't care what + * the user set it to. + */ + if (!firmware_has_feature(FW_FEATURE_LPAR)) + event->attr.exclude_hv = 0; + + /* + * If this is a per-task event, then we can use + * PM_RUN_* events interchangeably with their non RUN_* + * equivalents, e.g. PM_RUN_CYC instead of PM_CYC. + * XXX we should check if the task is an idle task. + */ + flags = 0; + if (event->ctx->task) + flags |= PPMU_ONLY_COUNT_RUN; + + /* + * If this machine has limited events, check whether this + * event_id could go on a limited event. + */ + if (ppmu->flags & PPMU_LIMITED_PMC5_6) { + if (can_go_on_limited_pmc(event, ev, flags)) { + flags |= PPMU_LIMITED_PMC_OK; + } else if (ppmu->limited_pmc_event(ev)) { + /* + * The requested event_id is on a limited PMC, + * but we can't use a limited PMC; see if any + * alternative goes on a normal PMC. + */ + ev = normal_pmc_alternative(ev, flags); + if (!ev) + return ERR_PTR(-EINVAL); + } + } + + /* + * If this is in a group, check if it can go on with all the + * other hardware events in the group. We assume the event + * hasn't been linked into its leader's sibling list at this point. + */ + n = 0; + if (event->group_leader != event) { + n = collect_events(event->group_leader, ppmu->n_event - 1, + ctrs, events, cflags); + if (n < 0) + return ERR_PTR(-EINVAL); + } + events[n] = ev; + ctrs[n] = event; + cflags[n] = flags; + if (check_excludes(ctrs, cflags, n, 1)) + return ERR_PTR(-EINVAL); + + cpuhw = &get_cpu_var(cpu_hw_events); + err = power_check_constraints(cpuhw, events, cflags, n + 1); + put_cpu_var(cpu_hw_events); + if (err) + return ERR_PTR(-EINVAL); + + event->hw.config = events[n]; + event->hw.event_base = cflags[n]; + event->hw.last_period = event->hw.sample_period; + atomic64_set(&event->hw.period_left, event->hw.last_period); + + /* + * See if we need to reserve the PMU. + * If no events are currently in use, then we have to take a + * mutex to ensure that we don't race with another task doing + * reserve_pmc_hardware or release_pmc_hardware. + */ + err = 0; + if (!atomic_inc_not_zero(&num_events)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_read(&num_events) == 0 && + reserve_pmc_hardware(perf_event_interrupt)) + err = -EBUSY; + else + atomic_inc(&num_events); + mutex_unlock(&pmc_reserve_mutex); + } + event->destroy = hw_perf_event_destroy; + + if (err) + return ERR_PTR(err); + return &power_pmu; +} + +/* + * A event has overflowed; update its count and record + * things if requested. Note that interrupts are hard-disabled + * here so there is no possibility of being interrupted. + */ +static void record_and_restart(struct perf_event *event, unsigned long val, + struct pt_regs *regs, int nmi) +{ + u64 period = event->hw.sample_period; + s64 prev, delta, left; + int record = 0; + + /* we don't have to worry about interrupts here */ + prev = atomic64_read(&event->hw.prev_count); + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &event->count); + + /* + * See if the total period for this event has expired, + * and update for the next period. + */ + val = 0; + left = atomic64_read(&event->hw.period_left) - delta; + if (period) { + if (left <= 0) { + left += period; + if (left <= 0) + left = period; + record = 1; + } + if (left < 0x80000000LL) + val = 0x80000000LL - left; + } + + /* + * Finally record data if requested. + */ + if (record) { + struct perf_sample_data data = { + .addr = 0, + .period = event->hw.last_period, + }; + + if (event->attr.sample_type & PERF_SAMPLE_ADDR) + perf_get_data_addr(regs, &data.addr); + + if (perf_event_overflow(event, nmi, &data, regs)) { + /* + * Interrupts are coming too fast - throttle them + * by setting the event to 0, so it will be + * at least 2^30 cycles until the next interrupt + * (assuming each event counts at most 2 counts + * per cycle). + */ + val = 0; + left = ~0ULL >> 1; + } + } + + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); +} + +/* + * Called from generic code to get the misc flags (i.e. processor mode) + * for an event_id. + */ +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + u32 flags = perf_get_misc_flags(regs); + + if (flags) + return flags; + return user_mode(regs) ? PERF_RECORD_MISC_USER : + PERF_RECORD_MISC_KERNEL; +} + +/* + * Called from generic code to get the instruction pointer + * for an event_id. + */ +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + unsigned long ip; + + if (TRAP(regs) != 0xf00) + return regs->nip; /* not a PMU interrupt */ + + ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs); + return ip; +} + +/* + * Performance monitor interrupt stuff + */ +static void perf_event_interrupt(struct pt_regs *regs) +{ + int i; + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + struct perf_event *event; + unsigned long val; + int found = 0; + int nmi; + + if (cpuhw->n_limited) + freeze_limited_events(cpuhw, mfspr(SPRN_PMC5), + mfspr(SPRN_PMC6)); + + perf_read_regs(regs); + + nmi = perf_intr_is_nmi(regs); + if (nmi) + nmi_enter(); + else + irq_enter(); + + for (i = 0; i < cpuhw->n_events; ++i) { + event = cpuhw->event[i]; + if (!event->hw.idx || is_limited_pmc(event->hw.idx)) + continue; + val = read_pmc(event->hw.idx); + if ((int)val < 0) { + /* event has overflowed */ + found = 1; + record_and_restart(event, val, regs, nmi); + } + } + + /* + * In case we didn't find and reset the event that caused + * the interrupt, scan all events and reset any that are + * negative, to avoid getting continual interrupts. + * Any that we processed in the previous loop will not be negative. + */ + if (!found) { + for (i = 0; i < ppmu->n_event; ++i) { + if (is_limited_pmc(i + 1)) + continue; + val = read_pmc(i + 1); + if ((int)val < 0) + write_pmc(i + 1, 0); + } + } + + /* + * Reset MMCR0 to its normal value. This will set PMXE and + * clear FC (freeze events) and PMAO (perf mon alert occurred) + * and thus allow interrupts to occur again. + * XXX might want to use MSR.PM to keep the events frozen until + * we get back out of this interrupt. + */ + write_mmcr0(cpuhw, cpuhw->mmcr[0]); + + if (nmi) + nmi_exit(); + else + irq_exit(); +} + +void hw_perf_event_setup(int cpu) +{ + struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu); + + if (!ppmu) + return; + memset(cpuhw, 0, sizeof(*cpuhw)); + cpuhw->mmcr[0] = MMCR0_FC; +} + +int register_power_pmu(struct power_pmu *pmu) +{ + if (ppmu) + return -EBUSY; /* something's already registered */ + + ppmu = pmu; + pr_info("%s performance monitor hardware support registered\n", + pmu->name); + +#ifdef MSR_HV + /* + * Use FCHV to ignore kernel events if MSR.HV is set. + */ + if (mfmsr() & MSR_HV) + freeze_events_kernel = MMCR0_FCHV; +#endif /* CONFIG_PPC64 */ + + return 0; +} diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c index 3c90a3d9173e..2a361cdda635 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/kernel/power4-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c index 31918af3e355..0f4c1c73a6ad 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/kernel/power5+-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c index 867f6f663963..c351b3a57fbb 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/kernel/power5-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c index fa21890531da..ca399ba5034c 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/kernel/power6-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c index 018d094d92f9..28a4daacdc02 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/kernel/power7-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c index 75dccb71a043..479574413a93 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/kernel/ppc970-pmu.c @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include -#include +#include #include #include diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 465e498bcb33..df45a7449a66 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -53,7 +53,7 @@ #include #include #include -#include +#include #include #include @@ -527,25 +527,25 @@ void __init iSeries_time_init_early(void) } #endif /* CONFIG_PPC_ISERIES */ -#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32) -DEFINE_PER_CPU(u8, perf_counter_pending); +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_PPC32) +DEFINE_PER_CPU(u8, perf_event_pending); -void set_perf_counter_pending(void) +void set_perf_event_pending(void) { - get_cpu_var(perf_counter_pending) = 1; + get_cpu_var(perf_event_pending) = 1; set_dec(1); - put_cpu_var(perf_counter_pending); + put_cpu_var(perf_event_pending); } -#define test_perf_counter_pending() __get_cpu_var(perf_counter_pending) -#define clear_perf_counter_pending() __get_cpu_var(perf_counter_pending) = 0 +#define test_perf_event_pending() __get_cpu_var(perf_event_pending) +#define clear_perf_event_pending() __get_cpu_var(perf_event_pending) = 0 -#else /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ +#else /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */ -#define test_perf_counter_pending() 0 -#define clear_perf_counter_pending() +#define test_perf_event_pending() 0 +#define clear_perf_event_pending() -#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */ +#endif /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */ /* * For iSeries shared processors, we have to let the hypervisor @@ -573,9 +573,9 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); #ifdef CONFIG_PPC32 - if (test_perf_counter_pending()) { - clear_perf_counter_pending(); - perf_counter_do_pending(); + if (test_perf_event_pending()) { + clear_perf_event_pending(); + perf_event_do_pending(); } if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 830bef0a1131..e7dae82c1285 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include @@ -171,7 +171,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, die("Weird page fault", regs, SIGSEGV); } - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the @@ -312,7 +312,7 @@ good_area: } if (ret & VM_FAULT_MAJOR) { current->maj_flt++; - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, address); #ifdef CONFIG_PPC_SMLPAR if (firmware_has_feature(FW_FEATURE_CMO)) { @@ -323,7 +323,7 @@ good_area: #endif } else { current->min_flt++; - perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, address); } up_read(&mm->mmap_sem); diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 9efc8bda01b4..e382cae678b8 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -280,9 +280,9 @@ config PPC_HAVE_PMU_SUPPORT config PPC_PERF_CTRS def_bool y - depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT + depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT help - This enables the powerpc-specific perf_counter back-end. + This enables the powerpc-specific perf_event back-end. config SMP depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE -- cgit v1.2.3