From 3af1f8a41feab47b232b0c3d3b2322426672480d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 3 Oct 2011 15:16:47 +0100 Subject: serial: sh-sci: Fix up SH-2A SCIF support. This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy Tested-by: Federico Fuga Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch/sh/kernel') diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index a43124e608c3..0bd744f9a3b7 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -176,10 +176,12 @@ static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 192, 192, 192, 192 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -193,10 +195,12 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 196, 196, 196, 196 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -210,10 +214,12 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 200, 200, 200, 200 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -227,10 +233,12 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 204, 204, 204, 204 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { -- cgit v1.2.3 From e978aa7d7d57d04eb5f88a7507c4fb98577def77 Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:09 +0530 Subject: cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/sh/kernel/cpu/shmobile/cpuidle.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch/sh/kernel') diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index e4469e7233cb..7be50d4c4268 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -25,11 +25,11 @@ static unsigned long cpuidle_mode[] = { }; static int cpuidle_sleep_enter(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { unsigned long allowed_mode = arch_hwblk_sleep_mode(); ktime_t before, after; - int requested_state = state - &dev->states[0]; + int requested_state = index; int allowed_state; int k; @@ -46,11 +46,13 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev, */ k = min_t(int, allowed_state, requested_state); - dev->last_state = &dev->states[k]; before = ktime_get(); sh_mobile_call_standby(cpuidle_mode[k]); after = ktime_get(); - return ktime_to_ns(ktime_sub(after, before)) >> 10; + + dev->last_residency = (int)ktime_to_ns(ktime_sub(after, before)) >> 10; + + return k; } static struct cpuidle_device cpuidle_dev; @@ -84,7 +86,7 @@ void sh_mobile_setup_cpuidle(void) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = cpuidle_sleep_enter; - dev->safe_state = state; + dev->safe_state_index = i-1; if (sh_mobile_sleep_supported & SUSP_SH_SF) { state = &dev->states[i++]; -- cgit v1.2.3 From 46bcfad7a819bd17ac4e831b04405152d59784ab Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:42 +0530 Subject: cpuidle: Single/Global registration of idle states This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/sh/kernel/cpu/shmobile/cpuidle.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'arch/sh/kernel') diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index 7be50d4c4268..ad1012ad6b42 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -25,6 +25,7 @@ static unsigned long cpuidle_mode[] = { }; static int cpuidle_sleep_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { unsigned long allowed_mode = arch_hwblk_sleep_mode(); @@ -64,19 +65,19 @@ static struct cpuidle_driver cpuidle_driver = { void sh_mobile_setup_cpuidle(void) { struct cpuidle_device *dev = &cpuidle_dev; + struct cpuidle_driver *drv = &cpuidle_driver; struct cpuidle_state *state; int i; - cpuidle_register_driver(&cpuidle_driver); for (i = 0; i < CPUIDLE_STATE_MAX; i++) { - dev->states[i].name[0] = '\0'; - dev->states[i].desc[0] = '\0'; + drv->states[i].name[0] = '\0'; + drv->states[i].desc[0] = '\0'; } i = CPUIDLE_DRIVER_STATE_START; - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN); state->exit_latency = 1; @@ -86,10 +87,10 @@ void sh_mobile_setup_cpuidle(void) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = cpuidle_sleep_enter; - dev->safe_state_index = i-1; + drv->safe_state_index = i-1; if (sh_mobile_sleep_supported & SUSP_SH_SF) { - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C2"); strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN); @@ -102,7 +103,7 @@ void sh_mobile_setup_cpuidle(void) } if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) { - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C3"); strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN); @@ -114,7 +115,10 @@ void sh_mobile_setup_cpuidle(void) state->enter = cpuidle_sleep_enter; } + drv->state_count = i; dev->state_count = i; + cpuidle_register_driver(&cpuidle_driver); + cpuidle_register_device(dev); } -- cgit v1.2.3 From 149c370f3e06a6b43bf1d922ccd1f969c59c7c77 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 7 Nov 2011 14:40:45 +0900 Subject: sh: Wire up process_vm syscalls. Signed-off-by: Paul Mundt --- arch/sh/kernel/syscalls_32.S | 2 ++ arch/sh/kernel/syscalls_64.S | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/sh/kernel') diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 293e39c59c00..ee56a9b1a981 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -382,3 +382,5 @@ ENTRY(sys_call_table) .long sys_syncfs .long sys_sendmmsg .long sys_setns + .long sys_process_vm_readv /* 365 */ + .long sys_process_vm_writev diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index ceb34b94afa9..9af7de26fb71 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -402,3 +402,5 @@ sys_call_table: .long sys_syncfs .long sys_sendmmsg .long sys_setns /* 375 */ + .long sys_process_vm_readv + .long sys_process_vm_writev -- cgit v1.2.3