From d39398a333ddc490f842ccdd4b76c9674682aa5d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 26 Feb 2008 11:04:17 -0800 Subject: x86: seperate mmconf for fam10h out from setup_64.c Separate mmconf for fam10h out from setup_64.c Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 216 ++------------------------------------------- 1 file changed, 9 insertions(+), 207 deletions(-) (limited to 'arch/x86/kernel/setup_64.c') diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 5e269a5dde2e..d8a9ee752fb3 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -579,212 +579,6 @@ static int __cpuinit nearby_node(int apicid) } #endif -#ifdef CONFIG_PCI_MMCONFIG -struct pci_hostbridge_probe { - u32 bus; - u32 slot; - u32 vendor; - u32 device; -}; - -static u64 __cpuinitdata fam10h_pci_mmconf_base; -static int __cpuinitdata fam10h_pci_mmconf_base_status; - -static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, -}; - -struct range { - u64 start; - u64 end; -}; - -static int __cpuinit cmp_range(const void *x1, const void *x2) -{ - const struct range *r1 = x1; - const struct range *r2 = x2; - int start1, start2; - - start1 = r1->start >> 32; - start2 = r2->start >> 32; - - return start1 - start2; -} - -/*[47:0] */ -/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ -#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) -#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) -static void __cpuinit get_fam10h_pci_mmconf_base(void) -{ - int i; - unsigned bus; - unsigned slot; - int found; - - u64 val; - u32 address; - u64 tom2; - u64 base = FAM10H_PCI_MMCONF_BASE; - - int hi_mmio_num; - struct range range[8]; - - /* only try to get setting from BSP */ - /* -1 or 1 */ - if (fam10h_pci_mmconf_base_status) - return; - - if (!early_pci_allowed()) - goto fail; - - found = 0; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { - u32 id; - u16 device; - u16 vendor; - - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; - id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - - vendor = id & 0xffff; - device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { - found = 1; - break; - } - } - - if (!found) - goto fail; - - /* SYS_CFG */ - address = MSR_K8_SYSCFG; - rdmsrl(address, val); - - /* TOP_MEM2 is not enabled? */ - if (!(val & (1<<21))) { - tom2 = 0; - } else { - /* TOP_MEM2 */ - address = MSR_K8_TOP_MEM2; - rdmsrl(address, val); - tom2 = val & (0xffffULL<<32); - } - - if (base <= tom2) - base = tom2 + (1ULL<<32); - - /* - * need to check if the range is in the high mmio range that is - * above 4G - */ - hi_mmio_num = 0; - for (i = 0; i < 8; i++) { - u32 reg; - u64 start; - u64 end; - reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); - if (!(reg & 3)) - continue; - - start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ - reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ - - if (!end) - continue; - - range[hi_mmio_num].start = start; - range[hi_mmio_num].end = end; - hi_mmio_num++; - } - - if (!hi_mmio_num) - goto out; - - /* sort the range */ - sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); - - if (range[hi_mmio_num - 1].end < base) - goto out; - if (range[0].start > base) - goto out; - - /* need to find one window */ - base = range[0].start - (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - base = range[hi_mmio_num - 1].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - /* need to find window between ranges */ - if (hi_mmio_num > 1) - for (i = 0; i < hi_mmio_num - 1; i++) { - if (range[i + 1].start > (range[i].end + (1ULL << 32))) { - base = range[i].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - } - } - -fail: - fam10h_pci_mmconf_base_status = -1; - return; -out: - fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; -} -#endif - -static void __cpuinit fam10h_check_enable_mmcfg(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_PCI_MMCONFIG - u64 val; - u32 address; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, val); - - /* try to make sure that AP's setting is identical to BSP setting */ - if (val & FAM10H_MMIO_CONF_ENABLE) { - unsigned busnbits; - busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - /* only trust the one handle 256 buses, if acpi=off */ - if (!acpi_pci_disabled || busnbits >= 8) { - u64 base; - base = val & (0xffffULL << 32); - if (fam10h_pci_mmconf_base_status <= 0) { - fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; - return; - } else if (fam10h_pci_mmconf_base == base) - return; - } - } - - /* - * if it is not enabled, try to enable it and assume only one segment - * with 256 buses - */ - get_fam10h_pci_mmconf_base(); - if (fam10h_pci_mmconf_base_status <= 0) - return; - - printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); - val &= ~((FAM10H_MMIO_CONF_BASE_MASK<x86 == 0x10) - fam10h_check_enable_mmcfg(c); + fam10h_check_enable_mmcfg(); if (amd_apic_timer_broken()) disable_apic_timer = 1; -- cgit v1.2.3