From eeada9e89ff72cfb66e46d682bb3b8acdc0d95bd Mon Sep 17 00:00:00 2001 From: Ameya Palande Date: Tue, 5 Jul 2011 03:38:22 -0700 Subject: omap: rx51: Platform support for lp5523 led chip Platform support for lp5523 led chip Signed-off-by: Ameya Palande Signed-off-by: Mathias Nyman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 66 ++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 5e559dda3cc3..c1938dffb946 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -39,6 +39,7 @@ #include #include #include +#include #include <../drivers/staging/iio/light/tsl2563.h> @@ -53,6 +54,7 @@ #define RX51_WL1251_IRQ_GPIO 42 #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_LP5523_CHIP_EN_GPIO 41 #define RX51_USB_TRANSCEIVER_RST_GPIO 67 @@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { }; #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) +static struct lp5523_led_config rx51_lp5523_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + }, { + .chan_nr = 1, + .led_current = 50, + }, { + .chan_nr = 2, + .led_current = 50, + }, { + .chan_nr = 3, + .led_current = 50, + }, { + .chan_nr = 4, + .led_current = 50, + }, { + .chan_nr = 5, + .led_current = 50, + }, { + .chan_nr = 6, + .led_current = 50, + }, { + .chan_nr = 7, + .led_current = 50, + }, { + .chan_nr = 8, + .led_current = 50, + } +}; + +static int rx51_lp5523_setup(void) +{ + return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, + "lp5523_enable"); +} + +static void rx51_lp5523_release(void) +{ + gpio_free(RX51_LP5523_CHIP_EN_GPIO); +} + +static void rx51_lp5523_enable(bool state) +{ + gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); +} + +static struct lp5523_platform_data rx51_lp5523_platform_data = { + .led_config = rx51_lp5523_led_config, + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), + .clock_mode = LP5523_CLOCK_AUTO, + .setup_resources = rx51_lp5523_setup, + .release_resources = rx51_lp5523_release, + .enable = rx51_lp5523_enable, +}; +#endif + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -832,6 +892,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { I2C_BOARD_INFO("tsl2563", 0x29), .platform_data = &rx51_tsl2563_platform_data, }, +#endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) + { + I2C_BOARD_INFO("lp5523", 0x32), + .platform_data = &rx51_lp5523_platform_data, + }, #endif { I2C_BOARD_INFO("tpa6130a2", 0x60), -- cgit v1.2.3 From 094fc5593174e48366804484e2070f178a5317cb Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 5 Jul 2011 03:38:22 -0700 Subject: OMAP3: rx-51: Add full regulator definitions The vaux2 (VCSI) regulator is left on by the bootloader in rx-51. Since there the product has shipped and there won't be any bootloader updates to fix this issue, we need to define all the regulators and declare full constraints for the regulator FW. This will allow the regulator FW to disable unused regulators. Also this helps in adding more fine grain regulator support for rx-51 in the future. Thanks for Mark Brown for pointing out the correct solution. Signed-off-by: Kalle Jokiniemi Cc: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 69 ++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c1938dffb946..7d3775425170 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -563,6 +563,32 @@ static struct regulator_init_data rx51_vmmc2 = { .consumer_supplies = rx51_vmmc2_supplies, }; +static struct regulator_init_data rx51_vpll1 = { + .constraints = { + .name = "VPLL", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vpll2 = { + .constraints = { + .name = "VSDI_CSI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct regulator_init_data rx51_vsim = { .constraints = { .name = "VMMC2_IO_18", @@ -607,6 +633,43 @@ static struct regulator_init_data rx51_vio = { .consumer_supplies = rx51_vio_supplies, }; +static struct regulator_init_data rx51_vintana1 = { + .constraints = { + .name = "VINTANA1", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintana2 = { + .constraints = { + .name = "VINTANA2", + .min_uV = 2750000, + .max_uV = 2750000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintdig = { + .constraints = { + .name = "VINTDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -853,8 +916,13 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vaux2 = &rx51_vaux2, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, + .vpll1 = &rx51_vpll1, + .vpll2 = &rx51_vpll2, .vsim = &rx51_vsim, .vdac = &rx51_vdac, + .vintana1 = &rx51_vintana1, + .vintana2 = &rx51_vintana2, + .vintdig = &rx51_vintdig, .vio = &rx51_vio, }; @@ -1042,6 +1110,7 @@ error: void __init rx51_peripherals_init(void) { rx51_i2c_init(); + regulator_has_full_constraints(); gpmc_onenand_init(board_onenand_data); board_smc91x_init(); rx51_add_gpio_keys(); -- cgit v1.2.3 From 5fe8b4c19dc24e3bb873daf9e96a2439a83bbd79 Mon Sep 17 00:00:00 2001 From: Joel A Fernandes Date: Tue, 5 Jul 2011 03:38:22 -0700 Subject: OMAP3: beagle: add support for beagleboard xM revision C OMAP3: beagle: add support for beagleboard xM revision C The USB enable GPIO has been in beagleboard xM revision C. The USER button has been moved since beagleboard xM. Also, board specific initialization has been moved to beagle_config struct and initialized in omap3_beagle_init_rev. Default values in struct are for xMC. Signed-off-by: Joel A Fernandes Signed-off-by: Koen Kooi Acked-by: Jason Kridner Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 78 +++++++++++++++++++++------------ 1 file changed, 51 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 2d8dfb3213bf..78cf5f221f83 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -60,7 +60,8 @@ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 */ enum { OMAP3BEAGLE_BOARD_UNKN = 0, @@ -68,14 +69,26 @@ enum { OMAP3BEAGLE_BOARD_C1_3, OMAP3BEAGLE_BOARD_C4, OMAP3BEAGLE_BOARD_XM, + OMAP3BEAGLE_BOARD_XMC, }; static u8 omap3_beagle_version; -static u8 omap3_beagle_get_rev(void) -{ - return omap3_beagle_version; -} +/* + * Board-specific configuration + * Defaults to BeagleBoard-xMC + */ +static struct { + int mmc1_gpio_wp; + int usb_pwr_level; + int reset_gpio; + int usr_button_gpio; +} beagle_config = { + .mmc1_gpio_wp = -EINVAL, + .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .reset_gpio = 129, + .usr_button_gpio = 4, +}; static struct gpio omap3_beagle_rev_gpios[] __initdata = { { 171, GPIOF_IN, "rev_id_0" }, @@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void) case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + beagle_config.mmc1_gpio_wp = 29; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + break; + case 2: + printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -234,7 +261,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, + .gpio_wp = -EINVAL, }, {} /* Terminator */ }; @@ -252,17 +279,11 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r, usb_pwr_level; - - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - mmc[0].gpio_wp = -EINVAL; - } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || - (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } + int r; + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -272,9 +293,8 @@ static int beagle_twl_gpio_setup(struct device *dev, * high / others active low) * DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - usb_pwr_level = GPIOF_OUT_INIT_HIGH; - beagle_dvi_device.reset_gpio = 129; + /* Valid for all -xM revisions */ + if (cpu_is_omap3630()) { /* * gpio + 1 on Xm controls the TFP410's enable line (active low) * gpio + 2 control varies depending on the board rev as below: @@ -292,8 +312,6 @@ static int beagle_twl_gpio_setup(struct device *dev, pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); } else { - usb_pwr_level = GPIOF_OUT_INIT_LOW; - beagle_dvi_device.reset_gpio = 170; /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -301,8 +319,10 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -454,7 +474,8 @@ static struct platform_device leds_gpio = { static struct gpio_keys_button gpio_buttons[] = { { .code = BTN_EXTRA, - .gpio = 7, + /* Dynamically assigned depending on board */ + .gpio = -EINVAL, .desc = "user", .wakeup = 1, }, @@ -518,8 +539,8 @@ static void __init beagle_opp_init(void) return; } - /* Custom OPP enabled for XM */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + /* Custom OPP enabled for all xM versions */ + if (cpu_is_omap3630()) { struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); struct omap_hwmod *dh = omap_hwmod_lookup("iva"); struct device *dev; @@ -559,6 +580,9 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); + + gpio_buttons[0].gpio = beagle_config.usr_button_gpio; + platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); -- cgit v1.2.3 From c31469747854a1f1dcfd81a8fb1d9865c3ee58b9 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 5 Jul 2011 03:38:23 -0700 Subject: arm: omap3: cm-t35: add support for cm-t3730 cm-t3730 is basically the same board as cm-t35, but has AM/DM3730 SoC assembled and therefore some changes are required. Signed-off-by: Igor Grinberg Acked-by: Mike Rapoport [tony@atomide.com: updated for init_irq cleanup as noted by khilman@ti.com] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 6 ++- arch/arm/mach-omap2/board-cm-t35.c | 77 ++++++++++++++++++++++------ arch/arm/plat-omap/include/plat/uncompress.h | 1 + 3 files changed, 67 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891c48e3..4ae6257b39a4 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3 select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y + select MACH_CM_T3730 select OMAP_PACKAGE_CUS config MACH_CM_T3517 @@ -277,6 +278,9 @@ config MACH_CM_T3517 default y select OMAP_PACKAGE_CBB +config MACH_CM_T3730 + bool + config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 9d585ca3941d..fcd403224f98 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -1,5 +1,5 @@ /* - * board-cm-t35.c (CompuLab CM-T35 module) + * CompuLab CM-T35/CM-T3730 modules support * * Copyright (C) 2009-2011 CompuLab, Ltd. * Authors: Mike Rapoport @@ -570,17 +570,11 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* DSS */ + /* common DSS */ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), @@ -593,12 +587,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -611,19 +599,53 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static void __init cm_t3x_common_dss_mux_init(int mux_mode) +{ + omap_mux_init_signal("dss_data18", mux_mode); + omap_mux_init_signal("dss_data19", mux_mode); + omap_mux_init_signal("dss_data20", mux_mode); + omap_mux_init_signal("dss_data21", mux_mode); + omap_mux_init_signal("dss_data22", mux_mode); + omap_mux_init_signal("dss_data23", mux_mode); +} + +static void __init cm_t35_init_mux(void) +{ + omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); +} + +static void __init cm_t3730_init_mux(void) +{ + omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); +} +#else +static inline void cm_t35_init_mux(void) {} +static inline void cm_t3730_init_mux(void) {} #endif static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; -static void __init cm_t35_init(void) +static void __init cm_t3x_common_init(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); - cm_t35_init_nand(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); @@ -633,6 +655,19 @@ static void __init cm_t35_init(void) usbhs_init(&usbhs_bdata); } +static void __init cm_t35_init(void) +{ + cm_t3x_common_init(); + cm_t35_init_mux(); + cm_t35_init_nand(); +} + +static void __init cm_t3730_init(void) +{ + cm_t3x_common_init(); + cm_t3730_init_mux(); +} + MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, .reserve = omap_reserve, @@ -642,3 +677,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .timer = &omap3_timer, MACHINE_END + +MACHINE_START(CM_T3730, "Compulab CM-T3730") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap3_init_irq, + .init_machine = cm_t3730_init, + .timer = &omap3_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ac4b60d9aa29..a067484cc4a2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); -- cgit v1.2.3 From 27a69d709e63efc23df18cc411fa341749de750e Mon Sep 17 00:00:00 2001 From: Silesh C V Date: Tue, 5 Jul 2011 03:38:23 -0700 Subject: omap: 4430SDP: Register the card detect GPIO properly Without this the HSMMC driver takes GPIO 0 to be the card detect gpio and requests/configures it. This will give rise to issues when another driver needs to use GPIO 0. On 4430SDP, the card detection is through TWL 6030. Signed-off-by: Silesh C V Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index d7df07ef2cea..5e03ddb0eb17 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -323,6 +323,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, {} /* Terminator */ -- cgit v1.2.3 From 6de8bae86c0459a881cead6735cd6971334cadd3 Mon Sep 17 00:00:00 2001 From: Vishal Mahaveer Date: Tue, 5 Jul 2011 03:38:23 -0700 Subject: omap: blaze: add mmc5/wl1283 device support Add MMC5 support on BLAZE, which has the wl1283 device hardwired to. The wl1283 is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line, and power-controlled by a GPIO-based fixed regulator. Based on the patch for zoom by Ohad Ben-Cohen Signed-off-by: Vishal Mahaveer [tony@atomide.com: improved formatting a bit] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 81 +++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 5e03ddb0eb17..e5e8bbb00359 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -37,6 +38,7 @@ #include #include #include